Year |
Citation |
Score |
2014 |
Asiabanpour B, Ardis A, Andrade AA. A systematic use of reverse engineering in evaluating the overall accuracy of the fabricated parts International Journal of Rapid Manufacturing. 4: 165. DOI: 10.1504/Ijrapidm.2014.066006 |
0.334 |
|
2014 |
Hayasi M, Asiabanpour B. Close to CAD model curved-form adaptive slicing Rapid Prototyping Journal. 20: 133-144. DOI: 10.1108/Rpj-06-2012-0054 |
0.4 |
|
2013 |
Asiabanpour B, Chen HP. Automated Layer Aligning and Stacking System for the Fully Dense Freeform Fabrication Process Advanced Materials Research. 1251-1255. DOI: 10.4028/Www.Scientific.Net/Amr.655-657.1251 |
0.426 |
|
2013 |
Asiabanpour B, Hayasi M. Layer alignment tooling and bonding process for the fully dense freeform fabrication (FDFF) adaptive layering process International Journal of Rapid Manufacturing. 3: 172. DOI: 10.1504/Ijrapidm.2013.053687 |
0.404 |
|
2013 |
Hayasi MT, Asiabanpour B. A new adaptive slicing approach for the fully dense freeform fabrication (FDFF) process Journal of Intelligent Manufacturing. 24: 683-694. DOI: 10.1007/S10845-011-0615-4 |
0.458 |
|
2011 |
Um D, Asiabanpour B, Foor D, Kurtz M, Tellers M, McGregor MT. Crystallographic edge removal of silicon dioxide micro-parts in bulk micromachining International Journal of Rapid Manufacturing. 2: 299. DOI: 10.1504/Ijrapidm.2011.044704 |
0.369 |
|
2011 |
Wilson T, Asiabanpour B. Building good quality prototypes for forensic face reproduction from low quality laser scanned files International Journal of Rapid Manufacturing. 2: 92. DOI: 10.1504/Ijrapidm.2011.040691 |
0.323 |
|
2009 |
Asiabanpour B, Vejandla DT, Jimenez J, Novoa C. Optimising the automated plasma cutting process by design of experiments International Journal of Rapid Manufacturing. 1: 19. DOI: 10.1504/Ijrapidm.2009.028930 |
0.433 |
|
2009 |
Um D, Asiabanpour B, Jimenez J. A Flexible Micro Manufacturing System For Micro Parts Assembly Via Micro Visual Sensing And Eap Based Grasping Journal of Advanced Manufacturing Systems. 8: 137-152. DOI: 10.1142/S0219686709001730 |
0.353 |
|
2009 |
Asiabanpour B, Mokhtar A, Hayasi M, Kamrani A, Nasr EA. An Overview On Five Approaches For Translating Cad Data Into Manufacturing Information Journal of Advanced Manufacturing Systems. 8: 89-114. DOI: 10.1142/S0219686709001687 |
0.367 |
|
2009 |
Hayasi MT, Asiabanpour B. Machine path generation using direct slicing from design-by-feature solid model for rapid prototyping The International Journal of Advanced Manufacturing Technology. 45: 170-180. DOI: 10.1007/S00170-009-1944-8 |
0.4 |
|
2009 |
Hayasi MT, Asiabanpour B. Extraction of manufacturing information from design-by-feature solid model through feature recognition. The International Journal of Advanced Manufacturing Technology. 44: 1191-1203. DOI: 10.1007/S00170-008-1922-6 |
0.375 |
|
2008 |
Asiabanpour B, Subbareddy C, Kolichala S, VanWagner L. The heat element status assignment algorithms for the selective inhibition of sintering process array-based heating system Journal of Computer Applications in Technology. 32: 104-109. DOI: 10.1504/Ijcat.2008.020335 |
0.308 |
|
2007 |
Asiabanpour B, Cano R, Subbareddy C, Wasik F, VanWagner L, McCormick T. A new heater design by radiation modeling and a new polymer waste‐saving mechanism design for the SIS process Rapid Prototyping Journal. 13: 136-147. DOI: 10.1108/13552540710750889 |
0.387 |
|
2006 |
Asiabanpour B, Khoshnevis B, Palmer K. Advancements in the selective inhibition sintering process development Virtual and Physical Prototyping. 1: 43-52. DOI: 10.1080/17452750500289910 |
0.671 |
|
2006 |
Palmer K, Asiabanpour B, Khoshnevis B. Development of a Rapid Prototyping System using Response Surface Methodology Quality and Reliability Engineering International. 22: 919-937. DOI: 10.1002/Qre.779 |
0.605 |
|
2004 |
Asiabanpour B, Palmer K, Khoshnevis B. An experimental study of surface quality and dimensional accuracy for selective inhibition of sintering Rapid Prototyping Journal. 10: 181-192. DOI: 10.1108/13552540410539003 |
0.674 |
|
2004 |
Asiabanpour B, Khoshnevis B. Machine path generation for the SIS process Robotics and Computer-Integrated Manufacturing. 20: 167-175. DOI: 10.1016/J.Rcim.2003.10.005 |
0.651 |
|
2003 |
Khoshnevis B, Asiabanpour B, Mojdeh M, Palmer K. SIS-A New SFF Method Based on Powder Sintering Rapid Prototyping Journal. 9: 30-36. DOI: 10.1108/13552540310455638 |
0.666 |
|
Show low-probability matches. |