| Year |
Citation |
Score |
| 2020 |
Landers RG, Barton K, Devasia S, Kurfess T, Pagilla P, Tomizuka M. A Review of Manufacturing Process Control Journal of Manufacturing Science and Engineering. 142. DOI: 10.1115/1.4048111 |
0.537 |
|
| 2020 |
Burkart R, Dugenske A, Kurfess T. Enhanced Part Accuracy Through Strain Measurement in Milling Machines Journal of Manufacturing Science and Engineering-Transactions of the Asme. 142. DOI: 10.1115/1.4045228 |
0.343 |
|
| 2020 |
Parto M, Saldana C, Kurfess T. Real-Time Outlier Detection and Bayesian Classification using Incremental Computations for Efficient and Scalable Stream Analytics for IoT for Manufacturing Procedia Manufacturing. 48: 968-979. DOI: 10.1016/J.Promfg.2020.05.136 |
0.381 |
|
| 2020 |
Parto M, Saldana C, Kurfess T. A Novel Three-Layer IoT Architecture for Shared, Private, Scalable, and Real-time Machine Learning from Ubiquitous Cyber-Physical Systems Procedia Manufacturing. 48: 959-967. DOI: 10.1016/J.Promfg.2020.05.135 |
0.364 |
|
| 2020 |
Guamán-Lozada D, Ahuett-Garza H, Castro-Martin AP, Ruiz-Carrizal J, Márquez-Alderete MF, Anaya-Aranda JG, Kurfess TR, Castilla EGd. Design and testing of a positioning system based on a quasi kinematic guide and a clamp plate suspended by compliant straps for in-line metrology systems Manufacturing Letters. 24: 19-22. DOI: 10.1016/J.Mfglet.2020.03.006 |
0.309 |
|
| 2019 |
Collins JS, Tucker T, Kurfess T. Intensity-Based Registration With Voxel-Based Computer-Aided Manufacturing for Adaptive Machining Journal of Manufacturing Science and Engineering-Transactions of the Asme. 141. DOI: 10.1115/1.4044709 |
0.399 |
|
| 2019 |
Chen A, Kurfess TR. Signal processing techniques for rolling element bearing spall size estimation Mechanical Systems and Signal Processing. 117: 16-32. DOI: 10.1016/J.Ymssp.2018.03.006 |
0.316 |
|
| 2019 |
Kim MJ, Praniewicz M, Kurfess TR, Saldana C. Adaptive repair and digitization for hybrid manufacturing Procedia Manufacturing. 34: 154-160. DOI: 10.1016/J.Promfg.2019.06.133 |
0.419 |
|
| 2019 |
Praniewicz M, Kurfess TR, Saldana C. Error qualification for multi-axis BC-type machine tools Journal of Manufacturing Systems. 52: 211-216. DOI: 10.1016/J.Jmsy.2019.03.004 |
0.389 |
|
| 2019 |
Nie Z, Lynn R, Tucker T, Kurfess T. Voxel-based analysis and modeling of MRR computational accuracy in milling process Cirp Journal of Manufacturing Science and Technology. 27: 78-92. DOI: 10.1016/J.Cirpj.2019.07.003 |
0.401 |
|
| 2019 |
Galan U, Ahuett-Garza H, Orta P, Kurfess T. Shadow identification and height estimation of defects by direct processing of grayscale images The International Journal of Advanced Manufacturing Technology. 101: 317-328. DOI: 10.1007/S00170-018-2933-6 |
0.31 |
|
| 2018 |
Hossain MM, Nath C, Tucker TM, Vuduc RW, Kurfess TR. A Graphics Processor Unit-Accelerated Freeform Surface Offsetting Method for High-Resolution Subtractive Three-Dimensional Printing (Machining) Journal of Manufacturing Science and Engineering. 140. DOI: 10.1115/1.4038599 |
0.432 |
|
| 2018 |
Konobrytskyi D, Hossain MM, Tucker TM, Tarbutton JA, Kurfess TR. 5-Axis tool path planning based on highly parallel discrete volumetric geometry representation: Part I contact point generation Computer-Aided Design and Applications. 15: 76-89. DOI: 10.1080/16864360.2017.1353730 |
0.726 |
|
| 2018 |
Praniewicz M, Kurfess T, Saldana C. Adaptive geometry transformation and repair for hybrid manufacturing Procedia Manufacturing. 26: 228-236. DOI: 10.1016/J.Promfg.2018.07.031 |
0.41 |
|
| 2018 |
Ahuett-Garza H, Kurfess T. A brief discussion on the trends of habilitating technologies for Industry 4.0 and Smart manufacturing Manufacturing Letters. 15: 60-63. DOI: 10.1016/J.Mfglet.2018.02.011 |
0.331 |
|
| 2018 |
Galan U, Orta P, Kurfess T, Ahuett-Garza H. Surface defect identification and measurement for metal castings by vision system Manufacturing Letters. 15: 5-8. DOI: 10.1016/J.Mfglet.2017.12.001 |
0.306 |
|
| 2018 |
Chen A, Kurfess TR. A new model for rolling element bearing defect size estimation Measurement. 114: 144-149. DOI: 10.1016/J.Measurement.2017.09.018 |
0.311 |
|
| 2018 |
Wu D, Weiss BA, Kurfess T, Wang L, Davis J. Introduction to the special issue on smart manufacturing Journal of Manufacturing Systems. 48: 1-2. DOI: 10.1016/J.Jmsy.2018.07.008 |
0.317 |
|
| 2018 |
Coronado PDU, Lynn R, Louhichi W, Parto M, Wescoat E, Kurfess T. Part data integration in the Shop Floor Digital Twin: Mobile and cloud technologies to enable a manufacturing execution system Journal of Manufacturing Systems. 48: 25-33. DOI: 10.1016/J.Jmsy.2018.02.002 |
0.395 |
|
| 2018 |
Carrasco U, Coronado PDU, Parto M, Kurfess TR. Indoor location service in support of a smart manufacturing facility Computers in Industry. 103: 132-140. DOI: 10.1016/J.Compind.2018.09.009 |
0.413 |
|
| 2017 |
Lynn R, Dinar M, Huang N, Collins J, Yu J, Greer C, Tucker T, Kurfess T. Direct Digital Subtractive Manufacturing of a Functional Assembly Using Voxel-Based Models Journal of Manufacturing Science and Engineering. 140. DOI: 10.1115/1.4037631 |
0.395 |
|
| 2017 |
Huang N, Lynn R, Kurfess T. Aggressive Spiral Toolpaths for Pocket Machining Based on Medial Axis Transformation Journal of Manufacturing Science and Engineering-Transactions of the Asme. 139: 8. DOI: 10.1115/1.4035720 |
0.352 |
|
| 2017 |
Lynn R, Wescoat E, Han D, Kurfess T. Embedded fog computing for high-frequency MTConnect data analytics Manufacturing Letters. 15: 135-138. DOI: 10.1016/J.Mfglet.2017.11.002 |
0.409 |
|
| 2017 |
Yu J, Lynn R, Tucker T, Saldana C, Kurfess T. Model-free subtractive manufacturing from computed tomography data Manufacturing Letters. 13: 44-47. DOI: 10.1016/J.Mfglet.2017.06.004 |
0.374 |
|
| 2017 |
Chen A, Dinar M, Gruenewald T, Wang M, Rosca J, Kurfess TR. Manufacturing apps and the Dynamic House of Quality: Towards an industrial revolution Manufacturing Letters. 13: 25-29. DOI: 10.1016/J.Mfglet.2017.05.005 |
0.386 |
|
| 2017 |
Wu D, Terpenny J, Kurfess T, Bartles DL. Introduction to the special issue on high performance computing and data analytics for cyber manufacturing Journal of Manufacturing Systems. 43: 213. DOI: 10.1016/J.Jmsy.2017.04.020 |
0.317 |
|
| 2017 |
Kuttolamadom M, Jones J, Mears L, Oehsen JV, Kurfess T, Ziegert J. High performance computing simulations to identify process parameter designs for profitable titanium machining Journal of Manufacturing Systems. 43: 235-247. DOI: 10.1016/J.Jmsy.2017.02.014 |
0.766 |
|
| 2017 |
Wu D, Liu S, Zhang L, Terpenny J, Gao RX, Kurfess T, Guzzo JA. A fog computing-based framework for process monitoring and prognosis in cyber-manufacturing Journal of Manufacturing Systems. 43: 25-34. DOI: 10.1016/J.Jmsy.2017.02.011 |
0.421 |
|
| 2017 |
Corne R, Nath C, Mansori ME, Kurfess T. Study of spindle power data with neural network for predicting real-time tool wear/breakage during inconel drilling Journal of Manufacturing Systems. 43: 287-295. DOI: 10.1016/J.Jmsy.2017.01.004 |
0.394 |
|
| 2017 |
Lynn R, Contis D, Hossain M, Huang N, Tucker T, Kurfess T. Voxel model surface offsetting for computer-aided manufacturing using virtualized high-performance computing Journal of Manufacturing Systems. 43: 296-304. DOI: 10.1016/J.Jmsy.2016.12.005 |
0.425 |
|
| 2016 |
Aminzadeh M, Kurfess T. A novel background subtraction technique based on grayscale morphology for weld defect detection Proceedings of Spie. 9804. DOI: 10.1117/12.2223262 |
0.31 |
|
| 2016 |
Wu Z, Tucker TM, Nath C, Kurfess TR, Vuduc RW. Step Ring-Based Three-Dimensional Path Planning Via Graphics Processing Unit Simulation for Subtractive Three-Dimensional Printing Journal of Manufacturing Science and Engineering. 139. DOI: 10.1115/1.4034662 |
0.383 |
|
| 2016 |
Lynn R, Saldana C, Kurfess T, Reddy N, Simpson TW, Jablokow KW, Tucker T, Tedia S, Williams C. Toward Rapid Manufacturability Analysis Tools for Engineering Design Education Procedia Manufacturing. 5: 1183-1196. DOI: 10.1016/J.Promfg.2016.08.093 |
0.375 |
|
| 2016 |
Nath C, Kurfess T. Obstruction-type Chip Breakers for Controllable Chips and Improved Cooling/Lubrication During Drilling – A Feasibility Study Procedia Manufacturing. 5: 375-385. DOI: 10.1016/J.Promfg.2016.08.032 |
0.428 |
|
| 2016 |
Corne R, Nath C, Mansori ME, Kurfess T. Enhancing Spindle Power Data Application with Neural Network for Real-time Tool Wear/Breakage Prediction During Inconel Drilling☆ Procedia Manufacturing. 5: 1-14. DOI: 10.1016/J.Promfg.2016.08.004 |
0.393 |
|
| 2016 |
Drouillet C, Karandikar J, Nath C, Journeaux A, Mansori ME, Kurfess T. Tool life predictions in milling using spindle power with the neural network technique Journal of Manufacturing Processes. 22: 161-168. DOI: 10.1016/J.Jmapro.2016.03.010 |
0.399 |
|
| 2016 |
Brooks Z, Nath C, Kurfess TR. Investigating surface metrology of curved wall surface during milling of SS304 with different tool path strategies The International Journal of Advanced Manufacturing Technology. 86: 1963-1972. DOI: 10.1007/S00170-015-8323-4 |
0.392 |
|
| 2015 |
Kuttolamadom M, Mehta P, Mears L, Kurfess T. Correlation of the Volumetric Tool Wear Rate of Carbide Milling Inserts With the Material Removal Rate of Ti–6Al–4V Journal of Manufacturing Science and Engineering-Transactions of the Asme. 137: 21021. DOI: 10.1115/1.4029649 |
0.787 |
|
| 2015 |
Kuttolamadom MA, Mears ML, Kurfess TR. The Correlation of the Volumetric Wear Rate of Turning Tool Inserts With Carbide Grain Sizes Journal of Manufacturing Science and Engineering-Transactions of the Asme. 137: 11015. DOI: 10.1115/1.4028129 |
0.755 |
|
| 2015 |
Nath C, Brooks Z, Kurfess TR. On Machinability Study and Process Optimization in Face Milling of Some Alloys with Indexable Copy Face Mill Inserts Procedia Manufacturing. 1: 487-500. DOI: 10.1016/J.Promfg.2015.09.008 |
0.463 |
|
| 2015 |
Karandikar J, Kurfess T. Cost optimization and experimental design in milling using surrogate models and value of information Journal of Manufacturing Systems. 37: 479-486. DOI: 10.1016/J.Jmsy.2014.10.002 |
0.382 |
|
| 2015 |
Nath C, Brooks Z, Kurfess TR. Machinability study and process optimization in face milling of some super alloys with indexable copy face mill inserts Journal of Manufacturing Processes. 20: 88-97. DOI: 10.1016/J.Jmapro.2015.09.006 |
0.466 |
|
| 2015 |
Bunget G, Shen Q, Gramling F, Judd D, Kurfess TR. Impact-acoustic evaluation method for rubber-steel composites: Part I. Relevant diagnostic concepts Applied Acoustics. 90: 74-80. DOI: 10.1016/J.Apacoust.2014.10.014 |
0.323 |
|
| 2014 |
Kurfess T, Cass WJ. Rethinking Additive Manufacturing and Intellectual Property Protection Research-Technology Management. 57: 35-42. DOI: 10.5437/08956308X5705256 |
0.314 |
|
| 2014 |
Liang SY, Li Y, Billington SA, Zhang C, Shiroishi J, Kurfess TR, Danyluk S. Adaptive prognostics for rotary machineries Procedia Engineering. 86: 852-857. DOI: 10.1016/J.Proeng.2014.11.106 |
0.308 |
|
| 2014 |
Milner JL, Abu-Farha F, Kurfess T, Hammond VH. Effects of induced shear deformation on microstructure and texture evolution in CP-Ti rolled sheets Materials Science and Engineering A. 619: 12-25. DOI: 10.1016/J.Msea.2014.09.004 |
0.686 |
|
| 2013 |
Milner JL, Abu-Farha F, Bunget C, Kurfess T. Grain refinement and mechanical properties of CP-Ti processed by warm accumulative roll bonding Tms Annual Meeting. 33-40. DOI: 10.1016/J.Msea.2012.10.081 |
0.697 |
|
| 2013 |
Milner JL, Bunget C, Abu-Farha F, Kurfess T, Hammond VH. Modeling tensile strength of materials processed by accumulative roll bonding Journal of Manufacturing Processes. 15: 219-226. DOI: 10.1016/J.Jmapro.2013.02.001 |
0.715 |
|
| 2013 |
Yun J, Jung Y, Kurfess T. A geometric postprocessing method for 5-axis machine tools using locations of joint points International Journal of Precision Engineering and Manufacturing. 14: 1969-1977. DOI: 10.1007/S12541-013-0268-7 |
0.352 |
|
| 2013 |
Tarbutton J, Kurfess TR, Tucker T, Konobrytskyi D. Gouge-free voxel-based machining for parallel processors The International Journal of Advanced Manufacturing Technology. 69: 1941-1953. DOI: 10.1007/S00170-013-5148-X |
0.729 |
|
| 2012 |
Jones J, Kuttolamadom M, Mears L, Kurfess T, Funk K. Life-Cycle Integration of Titanium Alloys into the Automotive Segment for Vehicle Light-Weighting: Part I - Component Redesign, Prototyping, and Validation Sae International Journal of Materials and Manufacturing. 5: 247-259. DOI: 10.4271/2012-01-0784 |
0.703 |
|
| 2012 |
Estrems M, Sánchez HT, Kurfess T, Bunget C. Effects of Wear on Cutting Forces in End-Milling Nickel Alloy Advanced Materials Research. 498: 79-84. DOI: 10.4028/Www.Scientific.Net/Amr.498.79 |
0.398 |
|
| 2012 |
Kuttolamadom MA, Laine Mears M, Kurfess TR, Burger U, Bryan A. On the volumetric assessment of tool wear in machining inserts with complex geometries-Part II: Experimental investigation and validation on Ti-6Al-4V Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4007294 |
0.771 |
|
| 2012 |
Kuttolamadom MA, Laine Mears M, Kurfess TR. On the Volumetric assessment of tool wear in machining inserts with complex geometries-part 1: Need, methodology, and standardization Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4007184 |
0.772 |
|
| 2011 |
Mears L, Omar M, Kurfess TR. Automotive engineering curriculum development: Case study for Clemson University Journal of Intelligent Manufacturing. 22: 693-708. DOI: 10.1007/S10845-009-0329-Z |
0.314 |
|
| 2010 |
Tarbutton JA, Kurfess TR, Tucker TM. Graphics based path planning for multi-axis machine tools Computer-Aided Design and Applications. 7: 835-845. DOI: 10.3722/Cadaps.2010.835-845 |
0.738 |
|
| 2010 |
Roth JT, Djurdjanovic D, Yang X, Mears L, Kurfess T. Quality and inspection of machining operations: Tool condition monitoring Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0410151-04101516. DOI: 10.1115/1.4002022 |
0.417 |
|
| 2009 |
Mears L, Roth JT, Djurdjanovic D, Yang X, Kurfess T. Quality and inspection of machining operations: CMM integration to the machine tool Journal of Manufacturing Science and Engineering, Transactions of the Asme. 131: 0510061-05100613. DOI: 10.1115/1.3184085 |
0.437 |
|
| 2008 |
Carter JA, Tucker TM, Kurfess TR. 3-Axis CNC path planning using depth buffer and fragment shader Computer-Aided Design and Applications. 5: 612-621. DOI: 10.3722/Cadaps.2008.612-621 |
0.332 |
|
| 2008 |
Limroth JC, Tarbutton JA, Kurfess TR. Review of Recent Patents Related to Graphical Embedded Programming Recent Patents On Electrical Engineering. 1: 155-163. DOI: 10.2174/1874476110801020155 |
0.638 |
|
| 2008 |
Dawson TG, Kurfess TR. Optimisation of cutting conditions in hard turning using ceramic-coated and uncoated PCBN cutting tools International Journal of Manufacturing Technology and Management. 14: 448-460. DOI: 10.1504/Ijmtm.2008.017738 |
0.428 |
|
| 2008 |
Nichols JF, Shilling M, Kurfess TR. Review of MEMS metrology solutions International Journal of Manufacturing Technology and Management. 13: 344-359. DOI: 10.1504/Ijmtm.2008.016781 |
0.31 |
|
| 2008 |
Tarbutton JA, Kurfess TR. Modelling and system identification of a high precision measurement machine International Journal of Manufacturing Research. 3: 198-215. DOI: 10.1504/Ijmr.2008.017416 |
0.714 |
|
| 2008 |
Panyam Mohan Ram M, Kurfess TR, Tucker TM. Least-squares fitting of analytic primitives on a GPU Journal of Manufacturing Systems. 27: 130-135. DOI: 10.1016/J.Jmsy.2008.07.004 |
0.347 |
|
| 2007 |
Stone W, Kurfess TR. Grinding titanium aluminide: subsurface damage International Journal of Manufacturing Technology and Management. 12: 200-224. DOI: 10.1504/Ijmtm.2007.014150 |
0.346 |
|
| 2007 |
Mears L, Kolarits FM, Thompson M, Kurfess TR. Design of a flexible centring tooling system International Journal of Computer Applications in Technology. 28: 52-62. DOI: 10.1504/Ijcat.2007.012331 |
0.452 |
|
| 2006 |
Chen AH, Kurfess TR. Integrated inspection and process control for machining a circular contour on a two-axis vertical turning lathe International Journal of Manufacturing Research. 1: 101-117. DOI: 10.1504/Ijmr.2006.010707 |
0.465 |
|
| 2006 |
Tucker TM, Kurfess TR. Point cloud to CAD model registration methods in manufacturing inspection Journal of Computing and Information Science in Engineering. 6: 418-421. DOI: 10.1115/1.2353852 |
0.32 |
|
| 2006 |
Dawson TG, Kurfess TR. Modeling the Progression of Flank Wear on Uncoated and Ceramic-Coated Polycrystalline Cubic Boron Nitride Tools in Hard Turning Journal of Manufacturing Science and Engineering-Transactions of the Asme. 128: 104-109. DOI: 10.1115/1.2039097 |
0.438 |
|
| 2005 |
Dawson TG, Kurfess TR. Quantification of tool wear using white light interferometry and three-dimensional computational metrology International Journal of Machine Tools & Manufacture. 45: 591-596. DOI: 10.1016/J.Ijmachtools.2004.08.022 |
0.443 |
|
| 2004 |
Kirkland E, Kurfess TR, Liang SY. An Optical Coordinate Measuring Machine for Nanoscale Dimensional Metrology Journal of Advanced Computational Intelligence and Intelligent Informatics. 8: 39-44. DOI: 10.20965/Jaciii.2004.P0039 |
0.338 |
|
| 2004 |
Kim B, Schmittdiel MC, Degertekin FL, Kurfess TR. Deformable diffraction grating for scanning micro interferometer arrays Proceedings of Spie - the International Society For Optical Engineering. 5348: 98-107. DOI: 10.1117/12.527458 |
0.303 |
|
| 2004 |
Chinn D, Ostendorp P, Haugh M, Kershmann R, Kurfess T, Claudet A, Tucker T. Three dimensional imaging of LIGA-made microcomponents Journal of Manufacturing Science and Engineering-Transactions of the Asme. 126: 813-821. DOI: 10.1115/1.1812774 |
0.316 |
|
| 2004 |
Kim B, Schmittdiel MC, Degertekin FL, Kurfess TR. Scanning Grating Microinterferometer for MEMS Metrology Journal of Manufacturing Science and Engineering-Transactions of the Asme. 126: 807-812. DOI: 10.1115/1.1812773 |
0.32 |
|
| 2004 |
Nichols JF, Kurfess TR. Metrology of high aspect ratio MEMS Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems. 10: 556-559. DOI: 10.1007/S00542-004-0393-4 |
0.367 |
|
| 2003 |
Razavi HA, Kurfess TR. Detection of wheel and workpiece contact/release in reciprocating surface grinding Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 394-395. DOI: 10.1115/1.1559160 |
0.316 |
|
| 2003 |
Crudele M, Kurfess TR. Implementation of a fast tool servo with repetitive control for diamond turning Mechatronics. 13: 243-257. DOI: 10.1016/S0957-4158(01)00036-8 |
0.381 |
|
| 2003 |
Razavi HA, Kurfess TR, Danyluk S. Force control grinding of gamma titanium aluminide International Journal of Machine Tools and Manufacture. 43: 185-191. DOI: 10.1016/S0890-6955(02)00113-X |
0.334 |
|
| 2003 |
Tucker TM, Kurfess TR. Newton methods for parametric surface registration. Part II: Experimental validation Cad Computer Aided Design. 35: 115-120. DOI: 10.1016/S0010-4485(01)00215-9 |
0.311 |
|
| 2003 |
Tucker TM, Kurfess TR. Newton methods for parametric surface registration. Part I: Theory Cad Computer Aided Design. 35: 107-114. DOI: 10.1016/S0010-4485(01)00214-7 |
0.307 |
|
| 2001 |
Cowan RW, Schertz DJ, Kurfess TR. An adaptive statistically based controller for through-feed centerless grinding Journal of Manufacturing Science and Engineering-Transactions of the Asme. 123: 380-386. DOI: 10.1115/1.1381398 |
0.359 |
|
| 2001 |
Longanbach DM, Kurfess TR. In-process gage frequency response measurement Mechatronics. 11: 745-757. DOI: 10.1016/S0957-4158(00)00051-9 |
0.34 |
|
| 2000 |
Li Y, Kurfess TR, Liang SY. Stochastic Prognostics For Rolling Element Bearings Mechanical Systems and Signal Processing. 14: 747-762. DOI: 10.1006/Mssp.2000.1301 |
0.321 |
|
| 1999 |
Choi W, Kurfess TR. Dimensional Measurement Data Analysis, Part 2: Minimum Zone Evaluation Journal of Manufacturing Science and Engineering-Transactions of the Asme. 121: 246-250. DOI: 10.1115/1.2831212 |
0.369 |
|
| 1999 |
Choi W, Kurfess TR. Dimensional Measurement Data Analysis, Part 1: A Zone Fitting Algorithm Journal of Manufacturing Science and Engineering-Transactions of the Asme. 121: 238-245. DOI: 10.1115/1.2831211 |
0.346 |
|
| 1999 |
Jenkins HE, Kurfess TR. Adaptive pole-zero cancellation in grinding force control Ieee Transactions On Control Systems Technology. 7: 363-370. DOI: 10.1109/87.761056 |
0.351 |
|
| 1999 |
Ulmer BC, Kurfess TR. Integration of an open architecture controller with a diamond turning machine Mechatronics. 9: 349-361. DOI: 10.1016/S0957-4158(98)00055-5 |
0.431 |
|
| 1999 |
Li Y, Billington S, Zhang C, Kurfess T, Danyluk S, Liang S. Adaptive Prognostics for Rolling Element Bearing Condition Mechanical Systems and Signal Processing. 13: 103-113. DOI: 10.1006/Mssp.1998.0183 |
0.325 |
|
| 1998 |
Ludwick SJ, Jenkins HE, Kurfess TR. Design and Implementation of a Tube Wall Thickness Measurement System Journal of Manufacturing Science and Engineering-Transactions of the Asme. 120: 471-475. DOI: 10.1115/1.2830149 |
0.319 |
|
| 1998 |
Gallagher CT, Kurfess TR. Design and implementation of a system for rapid inspection of critical dimensions in high volume production Mechatronics. 8: 413-425. DOI: 10.1016/S0957-4158(97)00056-1 |
0.375 |
|
| 1998 |
Choi W, Kurfess TR, Cagan J. Sampling uncertainty in coordinate measurement data analysis Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 22: 153-163. DOI: 10.1016/S0141-6359(98)00011-7 |
0.307 |
|
| 1997 |
Jenkins HE, Kurfess TR. Dynamic Stiffness Implications for a Multiaxis Grinding System Journal of Vibration and Control. 3: 297-313. DOI: 10.1177/107754639700300304 |
0.354 |
|
| 1997 |
Vasseur H, Kurfess TR, Cagan J. Use of a Quality Loss Function to Select Statistical Tolerances Journal of Manufacturing Science and Engineering-Transactions of the Asme. 119: 410-416. DOI: 10.1115/1.2831121 |
0.322 |
|
| 1997 |
Jenkins HE, Kurfess TR, Ludwick SJ. Determination of a dynamic grinding model Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 119: 289-293. DOI: 10.1115/1.2801248 |
0.405 |
|
| 1997 |
Bittle SD, Kurfess TR. An active piezoelectric probe for precision measurement on a CMM Mechatronics. 7: 337-354. DOI: 10.1016/S0957-4158(97)00005-6 |
0.358 |
|
| 1996 |
Kurfess TR, Banks DL, Wolfson LJ. A Multivariate Statistical Approach to Metrology Journal of Manufacturing Science and Engineering-Transactions of the Asme. 118: 652-657. DOI: 10.1115/1.2831081 |
0.332 |
|
| 1996 |
Jenkins HE, Kurfess TR, Dorf RC. Design of a robust controller for a grinding system Ieee Transactions On Control Systems Technology. 4: 40-49. DOI: 10.1109/87.481765 |
0.308 |
|
| 1995 |
Kurfess TR, Banks DL. Statistical verification of conformance to geometric tolerance Computer-Aided Design. 27: 353-361. DOI: 10.1016/0010-4485(95)96799-R |
0.396 |
|
| 1990 |
Whitney DE, Edsall AC, Todtenkopf AB, Kurfess TR, Tate AR. Development and Control of an Automated Robotic Weld Bead Grinding System Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 112: 166-176. DOI: 10.1115/1.2896123 |
0.599 |
|
| 1988 |
Kurfess TR, Whitney DE, Brown ML. Verification of a Dynamic Grinding Model Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 110: 403-409. DOI: 10.1115/1.3152703 |
0.586 |
|
| Show low-probability matches. |
