Year |
Citation |
Score |
2020 |
Rahman MM, Ridwan S, Fehlinger D, McCarthy M. Wicking Enhanced Critical Heat Flux for Highly Wetting Fluids on Structured Surfaces. Langmuir : the Acs Journal of Surfaces and Colloids. PMID 32686421 DOI: 10.1021/acs.langmuir.9b03711 |
1 |
|
2019 |
Ridwan S, McCarthy M. Nanostructure-Supported Evaporation underneath a Growing Bubble. Acs Applied Materials & Interfaces. PMID 30758183 DOI: 10.1021/acsami.8b21260 |
0.56 |
|
2018 |
Gerasopoulos K, Luedeman WL, Ölçeroğlu E, McCarthy M, Benkoski JJ. Effects of Engineered Wettability on the Efficiency of Dew Collection. Acs Applied Materials & Interfaces. PMID 29297673 DOI: 10.1021/acsami.7b16379 |
0.52 |
|
2016 |
Ölçeroğlu E, McCarthy M. Self-Organization of Microscale Condensate for Delayed Flooding of Nanostructured Superhydrophobic Surfaces. Acs Applied Materials & Interfaces. 8: 5729-36. PMID 26855239 DOI: 10.1021/acsami.6b00852 |
0.76 |
|
2015 |
Rahman MM, Pollack J, McCarthy M. Increasing Boiling Heat Transfer using Low Conductivity Materials. Scientific Reports. 5: 13145. PMID 26281890 DOI: 10.1038/srep13145 |
0.76 |
|
2014 |
Rahman MM, Ölçero?lu E, McCarthy M. Role of wickability on the critical heat flux of structured superhydrophilic surfaces. Langmuir : the Acs Journal of Surfaces and Colloids. 30: 11225-34. PMID 25171197 DOI: 10.1021/la5030923 |
1 |
|
2014 |
Ölçero?lu E, Hsieh CY, Rahman MM, Lau KK, McCarthy M. Full-field dynamic characterization of superhydrophobic condensation on biotemplated nanostructured surfaces. Langmuir : the Acs Journal of Surfaces and Colloids. 30: 7556-66. PMID 24882117 DOI: 10.1021/la501063j |
0.76 |
|
2014 |
McCarthy M, Gerasopoulos K, Maroo SC, Hart AJ. Materials, fabrication, and manufacturing of Micro/Nanostructured surfaces for phase-change heat transfer enhancement Nanoscale and Microscale Thermophysical Engineering. 18: 288-310. DOI: 10.1080/15567265.2014.926436 |
0.76 |
|
2013 |
Fan XZ, Pomerantseva E, Gnerlich M, Brown A, Gerasopoulos K, McCarthy M, Culver J, Ghodssi R. Tobacco mosaic virus: A biological building block for micro/nano/bio systems Journal of Vacuum Science and Technology a: Vacuum, Surfaces and Films. 31. DOI: 10.1116/1.4816584 |
0.76 |
|
2012 |
Gerasopoulos K, Pomerantseva E, McCarthy M, Brown A, Wang C, Culver J, Ghodssi R. Hierarchical three-dimensional microbattery electrodes combining bottom-up self-assembly and top-down micromachining. Acs Nano. 6: 6422-32. PMID 22670634 DOI: 10.1021/nn301981p |
0.76 |
|
2012 |
Olceroglu E, King SM, Rahman MM, McCarthy M. Biotemplated superhydrophobic surfaces for enhanced dropwise condensation Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7: 2809-2815. DOI: 10.1115/IMECE2012-88158 |
0.76 |
|
2012 |
Rahman MM, King SM, Olceroglu E, McCarthy M. Nucleate boiling on biotemplated nanostructured surfaces Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7: 2801-2808. DOI: 10.1115/IMECE2012-88014 |
0.76 |
|
2012 |
King SM, Rahman MM, Krick AK, Branco LD, Olceroglu E, McCarthy M. Biotemplated nanostructured surfaces for enhanced phase change heat transfer Asme 2012 10th Int. Conf. On Nanochannels, Microchannels, and Minichannels Collocated With the Asme 2012 Heat Transfer Summer Conf. and the Asme 2012 Fluids Engineering Division Sum, Icnmm 2012. 817-825. DOI: 10.1115/ICNMM2012-73190 |
0.76 |
|
2012 |
McCarthy M, Gerasopoulos K, Enright R, Culver JN, Ghodssi R, Wang EN. Biotemplated hierarchical surfaces and the role of dual length scales on the repellency of impacting droplets Applied Physics Letters. 100. DOI: 10.1063/1.4729935 |
0.76 |
|
2011 |
Allison JM, Staats WL, McCarthy M, Jenicek D, Edoh AK, Lang JH, Wang EN, Brisson JG. Enhancement of convective heat transfer in an air-cooled heat exchanger using interdigitated impeller blades International Journal of Heat and Mass Transfer. 54: 4549-4559. DOI: 10.1016/j.ijheatmasstransfer.2011.06.023 |
0.76 |
|
2010 |
Staats WL, Peters TB, Allison JM, McCarthy M, Wang EN, Brisson JG. Investigation of a multiple impeller design for a high performance air-cooled heat sink Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7: 313-320. DOI: 10.1115/IMECE2010-40703 |
0.76 |
|
2010 |
Kariya HA, Koveal C, McCarthy M, Brisson JG, Wang EN. Modeling a loop heat pipe with a capillary wick in the condenser 2010 14th International Heat Transfer Conference, Ihtc 14. 5: 411-416. DOI: 10.1115/IHTC14-22854 |
0.76 |
|
2010 |
McCarthy M, Peters T, Allison J, Espinosa A, Jenicek D, Kariya A, Koveal C, Brisson JG, Lang JH, Wang EN. Design and analysis of high-performance air-cooled heat exchanger with an integrated capillary-pumped loop heat pipe 2010 12th Ieee Intersociety Conference On Thermal and Thermomechanical Phenomena in Electronic Systems, Itherm 2010. DOI: 10.1109/ITHERM.2010.5501375 |
0.76 |
|
2008 |
McCarthy M, Hanrahan B, Zorman C, Ghodssi R. Rolling friction in mems ball bearings: The effects of loading and solid film lubrication 2007 Proceedings of the Asme/Stle International Joint Tribology Conference, Ijtc 2007. 827-829. DOI: 10.1115/IJTC2007-44190 |
0.76 |
|
2008 |
Gerasopoulos K, McCarthy M, Royston E, Culver JN, Ghodssi R. Nanostructured nickel electrodes using the Tobacco mosaic virus for microbattery applications Journal of Micromechanics and Microengineering. 18. DOI: 10.1088/0960-1317/18/10/104003 |
0.76 |
|
Show low-probability matches. |