cached image

Winston Oluwole (Wole) Soboyejo - Publications

Affiliations: 
1999-2016 Mechanical and Aerospace Engineering Princeton University, Princeton, NJ 
 2016- Mechanical Engineering Worcester Polytechnic Institute, Worcester, MA, United States 
Area:
Materials Science Engineering, Environmental Engineering
Website:
https://www.wpi.edu/people/faculty/wsoboyejo

233 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2019 Ampaw E, Owoseni TA, Du F, Pinilla N, Obayemi J, Hu J, Nigay PM, Nzihou A, Uzonwanne V, Kana Z, Dewoolkar M, Tan T, Soboyejo W. Compressive Deformation and Failure of Trabecular Structures in A Turtle Shell. Acta Biomaterialia. PMID 31310853 DOI: 10.1016/j.actbio.2019.07.023  1
2018 Hu J, Zhou Y, Obayemi JD, Du J, Soboyejo WO. An investigation of the viscoelastic properties and the actin cytoskeletal structure of triple negative breast cancer cells. Journal of the Mechanical Behavior of Biomedical Materials. 86: 1-13. PMID 29913305 DOI: 10.1016/j.jmbbm.2018.05.038  1
2018 Hu J, Youssefian S, Obayemi J, Malatesta K, Rahbar N, Soboyejo W. Investigation of Adhesive Interactions in the Specific Targeting of Triptorelin-conjugated PEG-coated Magnetite Nanoparticles to Breast Cancer Cells. Acta Biomaterialia. PMID 29458110 DOI: 10.1016/j.actbio.2018.02.011  1
2017 Carl AD, Kalan RE, Obayemi JD, Zebaze Kana MG, Soboyejo WO, Grimm RL. Synthesis and Characterization of Alkylamine-Functionalized Si(111) for Perovskite Adhesion with Minimal Interfacial Oxidation or Electronic Defects. Acs Applied Materials & Interfaces. PMID 28880534 DOI: 10.1021/acsami.7b07117  1
2017 Dozie-Nwachukwu SO, Obayemi JD, Danyuo Y, Anuku N, Odusanya OS, Malatesta K, Soboyejo WO. A comparative study of the adhesion of biosynthesized gold and conjugated gold/prodigiosin nanoparticles to triple negative breast cancer cells. Journal of Materials Science. Materials in Medicine. 28: 143. PMID 28819929 DOI: 10.1007/s10856-017-5943-2  1
2017 Reyes-Martinez MA, Abdelhady AL, Saidaminov MI, Chung DY, Bakr OM, Kanatzidis MG, Soboyejo WO, Loo YL. Time-Dependent Mechanical Response of APbX3 (A = Cs, CH3 NH3 ; X = I, Br) Single Crystals. Advanced Materials (Deerfield Beach, Fla.). PMID 28464367 DOI: 10.1002/adma.201606556  0.2
2017 Danyuo Y, E Oberaifo O, Obayemi JD, Dozie-Nwachukwu S, J Ani C, Odusanya OS, Zebaze Kana MG, Malatesta K, Soboyejo WO. Extended pulsated drug release from PLGA-based minirods. Journal of Materials Science. Materials in Medicine. 28: 61. PMID 28251469 DOI: 10.1007/s10856-017-5866-y  1
2017 Kan-Dapaah K, Rahbar N, Soboyejo W. Polymeric composite devices for localized treatment of early-stage breast cancer. Plos One. 12: e0172542. PMID 28245288 DOI: 10.1371/journal.pone.0172542  1
2017 Obayemi JD, Hu J, Uzonwanne VO, Odusanya OS, Malatesta K, Anuku N, Soboyejo WO. Adhesion of ligand-conjugated biosynthesized magnetite nanoparticles to triple negative breast cancer cells. Journal of the Mechanical Behavior of Biomedical Materials. 68: 276-286. PMID 28226310 DOI: 10.1016/j.jmbbm.2017.02.004  1
2017 Dozie-Nwachukwu SO, Danyuo Y, Obayemi JD, Odusanya OS, Malatesta K, Soboyejo WO. Extraction and encapsulation of prodigiosin in chitosan microspheres for targeted drug delivery. Materials Science & Engineering. C, Materials For Biological Applications. 71: 268-278. PMID 27987708 DOI: 10.1016/j.msec.2016.09.078  1
2016 Obayemi JD, Danyuo Y, Dozie-Nwachukwu S, Odusanya OS, Anuku N, Malatesta K, Yu W, Uhrich KE, Soboyejo WO. PLGA-based microparticles loaded with bacterial-synthesized prodigiosin for anticancer drug release: Effects of particle size on drug release kinetics and cell viability. Materials Science & Engineering. C, Materials For Biological Applications. 66: 51-65. PMID 27207038 DOI: 10.1016/j.msec.2016.04.071  1
2016 Danyuo Y, Dozie-Nwachukwu S, Obayemi JD, Ani CJ, Odusanya OS, Oni Y, Anuku N, Malatesta K, Soboyejo WO. Swelling of poly(N-isopropylacrylamide) P(NIPA)-based hydrogels with bacterial-synthesized prodigiosin for localized cancer drug delivery. Materials Science & Engineering. C, Materials For Biological Applications. 59: 19-29. PMID 26652344 DOI: 10.1016/j.msec.2015.09.090  1
2015 Rwenyagila ER, Agyei-Tuffour B, Onogu KO, Akin-Ojo O, Zebaze Kana MG, Alford TL, Soboyejo WO. Computational modeling of optical properties in aluminum nanolayers inserted in ZnO for solar cell electrodes. Optics Letters. 40: 3914-7. PMID 26274693 DOI: 10.1364/OL.40.003914  1
2015 Kan-Dapaah K, Rahbar N, Tahlil A, Crosson D, Yao N, Soboyejo W. Mechanical and hyperthermic properties of magnetic nanocomposites for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials. 49: 118-28. PMID 26005843 DOI: 10.1016/j.jmbbm.2015.04.023  1
2015 Kan-Dapaah K, Rahbar N, Soboyejo W. Novel magnetic heating probe for multimodal cancer treatment. Medical Physics. 42: 2203-11. PMID 25979014 DOI: 10.1118/1.4915955  1
2015 Du J, Niu X, Soboyejo W. Creep-assisted slow crack growth in bio-inspired dental multilayers. Journal of the Mechanical Behavior of Biomedical Materials. 46: 41-8. PMID 25771255 DOI: 10.1016/j.jmbbm.2015.01.019  1
2015 Obayemi JD, Dozie-Nwachukwu S, Danyuo Y, Odusanya OS, Anuku N, Malatesta K, Soboyejo WO. Biosynthesis and the conjugation of magnetite nanoparticles with luteinizing hormone releasing hormone (LHRH). Materials Science & Engineering. C, Materials For Biological Applications. 46: 482-96. PMID 25492013 DOI: 10.1016/j.msec.2014.10.081  1
2015 Kan-Dapaah K, Rahbar N, Theriault C, Soboyejo W. Implantable polymer/metal thin film structures for the localized treatment of cancer by Joule heating Journal of Applied Physics. 117. DOI: 10.1063/1.4918271  1
2014 Danyuo Y, Obayemi JD, Dozie-Nwachukwu S, Ani CJ, Odusanya OS, Oni Y, Anuku N, Malatesta K, Soboyejo WO. Prodigiosin release from an implantable biomedical device: kinetics of localized cancer drug release. Materials Science & Engineering. C, Materials For Biological Applications. 42: 734-45. PMID 25063175 DOI: 10.1016/j.msec.2014.06.008  1
2014 Akpan UM, Taylor B, Odusanya S, Freeman J, Soboyejo W. Studies on sandwiched electrospun scaffold of isomers of poly (lactic acid) (PLA) used in tissue engineering Proceedings of the 11th International Conference On Electronics, Computer and Computation, Icecco 2014. DOI: 10.1109/ICECCO.2014.6997563  1
2014 Kan-Dapaah K, Rahbar N, Soboyejo W. Implantable magnetic nanocomposites for the localized treatment of breast cancer Journal of Applied Physics. 116. DOI: 10.1063/1.4903736  1
2013 Mannoor MS, Jiang Z, James T, Kong YL, Malatesta KA, Soboyejo WO, Verma N, Gracias DH, McAlpine MC. 3D printed bionic ears. Nano Letters. 13: 2634-9. PMID 23635097 DOI: 10.1021/nl4007744  1
2013 Du J, Niu X, Rahbar N, Soboyejo W. Bio-inspired dental multilayers: effects of layer architecture on the contact-induced deformation. Acta Biomaterialia. 9: 5273-9. PMID 22940125 DOI: 10.1016/j.actbio.2012.08.034  1
2013 Yakub I, Soboyejo W. Adsorption of fluoride from water using sintered clay-hydroxyapatite composites Journal of Environmental Engineering (United States). 139: 995-1003. DOI: 10.1061/(ASCE)EE.1943-7870.0000692  1
2012 Oni Y, Soboyejo WO. Swelling and diffusion of PNIPA-based gels for localized chemotherapy and hyperthermia. Materials Science & Engineering. C, Materials For Biological Applications. 32: 24-30. PMID 23177767 DOI: 10.1016/j.msec.2011.09.006  1
2012 Shan WL, Du J, Hampp EP, Li H, Johnson M, Papandreou G, Maryanoff CA, Soboyejo WO. Degradation and adhesive/cohesive strengths of a reservoir-based drug eluting stent. Journal of the Mechanical Behavior of Biomedical Materials. 14: 208-15. PMID 23085427 DOI: 10.1016/j.jmbbm.2012.04.008  1
2012 Marques de Melo R, Bottino MA, Galvão RK, Soboyejo WO. Bond strengths, degree of conversion of the cement and molecular structure of the adhesive-dentine joint in fibre post restorations. Journal of Dentistry. 40: 286-94. PMID 22306531 DOI: 10.1016/j.jdent.2012.01.003  0.16
2012 Shan WL, Du J, Hampp EP, Li H, Papandreou G, Maryanoff CA, Soboyejo WO. Adhesion and cohesion in structures containing suspended microscopic polymeric films. Acta Biomaterialia. 8: 1469-80. PMID 22251936 DOI: 10.1016/j.actbio.2011.12.018  1
2012 Yakub I, Soboyejo WO. Adhesion of E. coli to silver- or copper-coated porous clay ceramic surfaces Journal of Applied Physics. 111. DOI: 10.1063/1.4722326  1
2012 Yakub I, Du J, Soboyejo WO. Mechanical properties, modeling and design of porous clay ceramics Materials Science and Engineering A. 558: 21-29. DOI: 10.1016/j.msea.2012.07.038  1
2011 Tan T, Rahbar N, Allameh SM, Kwofie S, Dissmore D, Ghavami K, Soboyejo WO. Mechanical properties of functionally graded hierarchical bamboo structures. Acta Biomaterialia. 7: 3796-803. PMID 21704742 DOI: 10.1016/j.actbio.2011.06.008  1
2011 Plappally AK, Yakub I, Brown LC, Soboyejo WO, Soboyejo ABO. Physical properties of porous clay ceramic-ware Journal of Engineering Materials and Technology, Transactions of the Asme. 133. DOI: 10.1115/1.4004158  1
2011 Rahbar N, Soboyejo WO. Design of functionally graded dental multilayers Fatigue and Fracture of Engineering Materials and Structures. 34: 887-897. DOI: 10.1111/j.1460-2695.2011.01581.x  1
2011 Akogwu O, Akande W, Tong T, Soboyejo W. Dendrite growth in annealed polymer blends for use in bulk heterojunction solar cells Journal of Applied Physics. 110. DOI: 10.1063/1.3652858  1
2011 Fu G, Soboyejo WO. Investigation of swellable poly (N-isopropylacrylamide) based hydrogels for drug delivery Materials Science and Engineering C. 31: 1084-1090. DOI: 10.1016/j.msec.2011.03.009  1
2011 Melo RM, Rahbar N, Soboyejo W. Interfacial fracture of dentin adhesively bonded to quartz-fiber reinforced composite Materials Science and Engineering C. 31: 770-774. DOI: 10.1016/j.msec.2011.01.005  1
2011 Tan T, Rahbar N, Buono A, Wheeler G, Soboyejo W. Sub-critical crack growth in adhesive/marble interfaces Materials Science and Engineering A. 528: 3697-3704. DOI: 10.1016/j.msea.2011.01.001  1
2010 Fu G, Soboyejo W. Modified poly (N-isopropylacrylamide) hydrogels for drug delivery Asme 2010 Summer Bioengineering Conference, Sbc 2010. 605-606. DOI: 10.1115/SBC2010-19491  1
2010 Soboyejo W, Mensah P, Diwan R. Interfacial kinetics of high temperature oxidation in YSZ thermal barrier coatings with bond coatings of NiCoCrAlY with 0.25% Hf Asme International Mechanical Engineering Congress and Exposition, Proceedings. 9: 2055-2062. DOI: 10.1115/IMECE2009-11556  1
2010 Akande WO, Akogwu O, Tong T, Soboyejo W. Thermally induced surface instabilities in polymer light emitting diodes Journal of Applied Physics. 108. DOI: 10.1063/1.3448035  1
2010 Akande WO, Cao Y, Yao N, Soboyejo W. Adhesion and the cold welding of gold-silver thin films Journal of Applied Physics. 107. DOI: 10.1063/1.3305791  1
2010 Chen J, Paetzell E, Zhou J, Lyons L, Soboyejo W. Osteoblast-like cell ingrowth, adhesion and proliferation on porous Ti-6Al-4V with particulate and fiber scaffolds Materials Science and Engineering C. 30: 647-656. DOI: 10.1016/j.msec.2010.01.005  1
2010 Fu G, Soboyejo WO. Swelling and diffusion characteristics of modified poly (N-isopropylacrylamide) hydrogels Materials Science and Engineering C. 30: 8-13. DOI: 10.1016/j.msec.2009.07.017  1
2010 Paetzell E, Bogorad A, Meng J, Soboyejo WO. Adhesion between anti-EphA2 antibody-coated AFM tips and breast cancer cells Materials Research Society Symposium Proceedings. 1237: 36-41.  1
2009 Niu X, Rahbar N, Farias S, Soboyejo W. Bio-inspired design of dental multilayers: experiments and model. Journal of the Mechanical Behavior of Biomedical Materials. 2: 596-602. PMID 19716103 DOI: 10.1016/j.jmbbm.2008.10.009  1
2009 Akande WO, Soboyejo W. Degradation of organic light emitting diodes by nucleated telephone cord blisters Applied Physics Letters. 95. DOI: 10.1063/1.3227695  1
2009 Fu G, Soboyejo WO. Cell/surface interactions of human osteo-sarcoma (HOS) cells and micro-patterned polydimelthylsiloxane (PDMS) surfaces Materials Science and Engineering C. 29: 2011-2018. DOI: 10.1016/j.msec.2009.03.017  1
2009 Plappally AK, Yakub I, Brown LC, Soboyejo WO, Soboyejo ABO. Theoretical and experimental investigation of water flow through porous ceramic clay compositewater filter Fluid Dynamics and Materials Processing. 5: 373-398.  1
2008 Asiyanbola B, Soboyejo W. For the surgeon: an introduction to nanotechnology. Journal of Surgical Education. 65: 155-61. PMID 18439542 DOI: 10.1016/j.jsurg.2007.11.006  1
2008 Wolf KV, Zong Z, Meng J, Orana A, Rahbar N, Balss KM, Papandreou G, Maryanoff CA, Soboyejo W. An investigation of adhesion in drug-eluting stent layers. Journal of Biomedical Materials Research. Part A. 87: 272-81. PMID 18306306 DOI: 10.1002/jbm.a.31860  1
2008 Huang M, Thompson VP, Rekow ED, Soboyejo WO. Modeling of water absorption induced cracks in resin-based composite supported ceramic layer structures. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 84: 124-30. PMID 17497681 DOI: 10.1002/jbm.b.30852  1
2008 Rahbar N, Yang Y, Soboyejo W. Mixed mode fracture of dental interfaces Materials Science and Engineering A. 488: 381-388. DOI: 10.1016/j.msea.2007.11.038  1
2008 Niu X, Yang Y, Soboyejo W. Contact deformation and cracking of zirconia/cement/foundation dental multilayers Materials Science and Engineering A. 485: 517-523. DOI: 10.1016/j.msea.2007.09.014  1
2008 Soboyejo W, Taylor R. Off-grid solar for rural development Mrs Bulletin. 33: 368-371.  1
2007 Zhou J, Huang M, Niu X, Soboyejo WO. Substrate creep on the fatigue life of a model dental multilayer structure. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 82: 374-82. PMID 17245742 DOI: 10.1002/jbm.b.30742  1
2007 Chen J, Mwenifumbo S, Langhammer C, McGovern JP, Li M, Beye A, Soboyejo WO. Cell/surface interactions and adhesion on Ti-6Al-4V: effects of surface texture. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 82: 360-73. PMID 17245741 DOI: 10.1002/jbm.b.30741  1
2007 Cao Y, Bly R, Moore W, Gao Z, Cuitino AM, Soboyejo W. On the measurement of human osteosarcoma cell elastic modulus using shear assay experiments. Journal of Materials Science. Materials in Medicine. 18: 103-9. PMID 17200819 DOI: 10.1007/s10856-006-0667-8  1
2007 Levy S, Van Dalen M, Agonafer S, Soboyejo WO. Cell/surface interactions and adhesion on bioactive glass 45S5. Journal of Materials Science. Materials in Medicine. 18: 89-102. PMID 17200818 DOI: 10.1007/s10856-006-0666-9  0.01
2007 Zhou J, Mah J, Shrotriya P, Mercer C, Soboyejo WO. Contact damage in an yttria stabilized zirconia: implications. Journal of Materials Science. Materials in Medicine. 18: 71-8. PMID 17200816 DOI: 10.1007/s10856-006-0664-y  1
2007 Huang M, Niu X, Soboyejo WO. Creep induced rate effects on radial cracks in multilayered structures. Journal of Materials Science. Materials in Medicine. 18: 65-9. PMID 17200815 DOI: 10.1007/s10856-006-0663-z  1
2007 Huang M, Wang R, Thompson V, Rekow D, Soboyejo WO. Bioinspired design of dental multilayers. Journal of Materials Science. Materials in Medicine. 18: 57-64. PMID 17200814 DOI: 10.1007/s10856-006-0662-0  1
2007 Allameh SM, Akogwu O, Collinson M, Thomas J, Soboyejo WO. Piezoelectric generators for biomedical and dental applications: effects of cyclic loading. Journal of Materials Science. Materials in Medicine. 18: 39-45. PMID 17200812 DOI: 10.1007/s10856-006-0660-2  1
2007 Steeves CA, Young YL, Liu Z, Bapat A, Bhalerao K, Soboyejo ABO, Soboyejo WO. Membrane thickness design of implantable bio-MEMS sensors for the in-situ monitoring of blood flow Journal of Materials Science: Materials in Medicine. 18: 25-37. PMID 17200811 DOI: 10.1007/s10856-006-0659-8  1
2007 Mwenifumbo S, Li M, Chen J, Beye A, Soboyejo W. Cell/surface interactions on laser micro-textured titanium-coated silicon surfaces. Journal of Materials Science. Materials in Medicine. 18: 9-23. PMID 17200810 DOI: 10.1007/s10856-006-0658-9  1
2007 Bhalerao KD, Lee SC, Soboyejo WO, Soboyejo AB. A folic acid-based functionalized surface for biosensor systems. Journal of Materials Science. Materials in Medicine. 18: 3-8. PMID 17200809 DOI: 10.1007/s10856-006-0657-x  1
2007 Arsne MA, Okwo A, Bilba K, Soboyejo ABO, Soboyejo WO. Chemically and thermally treated vegetable fibers for reinforcement of cement-based composites Materials and Manufacturing Processes. 22: 214-227. DOI: 10.1080/10426910601063386  1
2007 Obwoya SK, Baker T, Soboyejo W. Particle size and the mechanical properties of uganda clay Materials and Manufacturing Processes. 22: 206-213. DOI: 10.1080/10426910601063337  1
2007 Allameh SM, Suo Z, Soboyejo W. Creep of Al underlayer determined by channel cracking of topical Si 3N4 film Materials and Manufacturing Processes. 22: 170-174. DOI: 10.1080/10426910601062206  1
2007 Soboyejo W, Savastano H. Special issue - Materials and manufacturing processes on multifunctional micro- and nano-structures Materials and Manufacturing Processes. 22: 139. DOI: 10.1080/10426910601062016  1
2007 Soboyejo W. 4.17 - Fatigue of Biomaterials/Biomedical Systems Comprehensive Structural Integrity. 4: 443-465. DOI: 10.1016/B0-08-043749-4/04026-X  1
2007 Soboyejo W. Journal of Materials Science: Materials in Medicine - Preface Journal of Materials Science: Materials in Medicine. 18: 1. DOI: 10.1007/s10856-006-0656-y  1
2006 Leuschner C, Kumar CS, Hansel W, Soboyejo W, Zhou J, Hormes J. LHRH-conjugated magnetic iron oxide nanoparticles for detection of breast cancer metastases. Breast Cancer Research and Treatment. 99: 163-76. PMID 16752077 DOI: 10.1007/s10549-006-9199-7  1
2006 Zhou J, Leuschner C, Kumar C, Hormes JF, Soboyejo WO. Sub-cellular accumulation of magnetic nanoparticles in breast tumors and metastases. Biomaterials. 27: 2001-8. PMID 16280161 DOI: 10.1016/j.biomaterials.2005.10.013  1
2006 Zhou J, Huang M, Sagnang F, Soboyejo WO. Interfacial failure of a dental cement composite bonded to glass substrates. Dental Materials : Official Publication of the Academy of Dental Materials. 22: 585-91. PMID 16229885 DOI: 10.1016/j.dental.2005.06.007  1
2006 Niu X, Soboyejo W. Effects of loading rate on the deformation and cracking of dental multilayers: Experiments and models Journal of Materials Research. 21: 970-975. DOI: 10.1557/jmr.2006.0114  1
2006 Niang M, Soboyejo WO. On the use of quasi-crystal and fractal concepts in the design of affordable rural/urban landscapes Perspectives On Global Development and Technology. 5: 411-421. DOI: 10.1163/156915006779206060  1
2006 Okwo A, Soboyejo WO. An alternative holistic approach to affordable housing: Homes of foam Perspectives On Global Development and Technology. 5: 1-30. DOI: 10.1163/156915006777354473  1
2006 Otiti T, Soboyejo WO. Limited contribution of photovoltaic energy technology to economic development of sub-Saharan Africa Perspectives On Global Development and Technology. 5: 69-80. DOI: 10.1163/156915006777354455  1
2006 Zong Z, Cao Y, Rahbar N, Soboyejo W. Nano- and microscale adhesion energy measurement for Au-Au contacts in microswitch structures Journal of Applied Physics. 100. DOI: 10.1063/1.2388688  1
2006 Lou J, Bhalerao K, Soboyejo ABO, Soboyejo WO. An investigation of the effects of mix strength on the fracture and fatigue behavior of concrete mortar Journal of Materials Science. 41: 6973-6977. DOI: 10.1007/s10853-006-0219-0  1
2006 Cao Y, Chen J, Soboyejo WO. Investigation of spreading and traction of human osteosarcoma cells on microgrooved polydimethylsilaxone surfaces Materials Research Society Symposium Proceedings. 950: 88-93.  1
2005 Soboyejo A, Soboyejo W. Special section on fatigue of advanced materials Journal of Engineering Materials and Technology, Transactions of the Asme. 127: 1. DOI: 10.1115/1.1836794  1
2005 Lou J, Shrotriya P, Soboyejo WO. A cyclic microbend study on LIGA Ni microelectromechanical systems thin films Journal of Engineering Materials and Technology, Transactions of the Asme. 127: 16-22. DOI: 10.1115/1.1836767  1
2005 Cao Y, Kim C, Forrest SR, Soboyejo W. Effects of dust particles and layer properties on organic electronic devices fabricated by stamping Journal of Applied Physics. 98. DOI: 10.1063/1.1994935  1
2005 Zong Z, Soboyejo W. Indentation size effects in face centered cubic single crystal thin films Materials Science and Engineering A. 404: 281-290. DOI: 10.1016/j.msea.2005.05.075  1
2005 Zhou J, Allameh S, Soboyejo WO. Microscale testing of the strut in open cell aluminum foams Journal of Materials Science. 40: 429-439. DOI: 10.1007/s10853-005-6100-8  1
2005 Cao Y, Zong Z, Soboyejo W. An investigation of film thickness effect on mechanical properties of Au films using nanoindentation techniques Materials Research Society Symposium Proceedings. 875: 189-194.  1
2005 Yifang C, Jikou Z, Popoola O, Swarts DF, Soboyejo W. Atomic force microscopy contact mode study on ultra high molecular weight polyethylene Materials Research Society Symposium Proceedings. 880: 73-78.  1
2004 Shannon KL, Branca RT, Galiana G, Cenzano S, Bouchard LS, Soboyejo W, Warren WS. Simultaneous acquisition of multiple orders of intermolecular multiple-quantum coherence images in vivo. Magnetic Resonance Imaging. 22: 1407-12. PMID 15707790 DOI: 10.1016/j.mri.2004.10.019  1
2004 Bhalerao KD, Mwenifumbo SC, Soboyejo AB, Soboyejo WO. Bounds in the sensitivity of BioMEMS devices for cell detection. Biomedical Microdevices. 6: 23-31. PMID 15307441 DOI: 10.1023/B:BMMD.0000013362.62700.d2  1
2004 Kenai S, Soboyejo W, Soboyejo A. Some engineering properties of limestone concrete Materials and Manufacturing Processes. 19: 949-961. DOI: 10.1081/LMMP-200030668  1
2004 Zhou J, Soboyejo WO. A statistical approach to the prediction of brittle fracture in heat-affected zones of A707 steel welds Materials and Manufacturing Processes. 19: 921-947. DOI: 10.1081/LMMP-200030653  1
2004 Allameh SM, Soboyejo WO. Microstructure and surface topography evolution of Ti and Ni thin structures Materials and Manufacturing Processes. 19: 883-897. DOI: 10.1081/LMMP-200030590  1
2004 Zhou J, Soboyejo WO. Mechanics modeling of the compressive stiffness and strength of open-celled aluminum foams Materials and Manufacturing Processes. 19: 863-882. DOI: 10.1081/LMMP-200030584  1
2004 Shademan S, Sinha V, Soboyejo ABO, Soboyejo WO. An investigation of the effects of microstructure and stress ratio on fatigue crack growth in Ti-6Al-4V with colony α/β microstructures Mechanics of Materials. 36: 161-175. DOI: 10.1016/S0167-6636(03)00037-1  1
2004 Soboyejo WO, Shen W, Srivatsan TS. An investigation of fatigue crack nucleation and growth in a Ti-6Al-4V/TiB in situ composite Mechanics of Materials. 36: 141-159. DOI: 10.1016/S0167-6636(03)00036-X  1
2004 Shen W, Soboyejo WO, Soboyejo ABO. An investigation on fatigue and dwell-fatigue crack growth in Ti-6Al-2Sn-4Zr-2Mo-0.1Si Mechanics of Materials. 36: 117-140. DOI: 10.1016/S0167-6636(03)00035-8  1
2004 Shrotriya P, Allameh SM, Soboyejo WO. On the evolution of surface morphology of polysilicon MEMS structures during fatigue Mechanics of Materials. 36: 35-44. DOI: 10.1016/S0167-6636(03)00029-2  1
2004 Allameh SM, Yao N, Soboyejo WO. Synthesis of self-assembled nanoscale structures by focused ion-beam induced deposition Scripta Materialia. 50: 915-919. DOI: 10.1016/j.scriptamat.2003.05.001  1
2004 Zhou J, Soboyejo WO. Compression-compression fatigue of open cell aluminum foams: Macro-/micro- mechanisms and the effects of heat treatment Materials Science and Engineering A. 369: 23-35. DOI: 10.1016/j.msea.2003.08.009  1
2004 Zeng D, Katsube N, Soboyejo WO. Discrete modeling of transformation toughening in heterogeneous materials Mechanics of Materials. 36: 1057-1071. DOI: 10.1016/j.mechmat.2003.08.010  1
2004 Zhou J, Shrotriya P, Soboyejo WO. On the deformation of aluminum lattice block structures: From struts to structures Mechanics of Materials. 36: 723-737. DOI: 10.1016/j.mechmat.2003.08.007  1
2004 Zhou J, Shrotriya P, Soboyejo WO. Mechanisms and mechanics of compressive deformation in open-cell Al foams Mechanics of Materials. 36: 781-797. DOI: 10.1016/j.mechmat.2003.05.004  1
2004 Shen W, Soboyejo ABO, Soboyejo WO. Microstructural Effects on Fatigue and Dwell-Fatigue Crack Growth in α/β Ti-6Al-2Sn-4Zr-2Mo-0.1Si Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 163-187.  1
2003 Shrotriya P, Wang R, Katsube N, Seghi R, Soboyejo WO. Contact damage in model dental multilayers: an investigation of the influence of indenter size. Journal of Materials Science. Materials in Medicine. 14: 17-26. PMID 15348534  1
2003 Soboyejo ABO, Bhalerao KD, Soboyejo WO. Reliability assessment of polysilicon MEMS structures under mechanical fatigue loading Journal of Materials Science. 38: 4163-4167. DOI: 10.1023/A:1026381622941  1
2003 Lou J, Allameh S, Buccheit T, Soboyejo WO. An investigation of the effects of thickness on mechanical properties of LIGA nickel MEMS structures Journal of Materials Science. 38: 4129-4135. DOI: 10.1023/A:1026373421124  1
2003 Soboyejo W, Ballarini R, Allameh S. Guest editorial Journal of Materials Science. 38: 4073. DOI: 10.1023/A:1026361018398  1
2003 Bhalerao K, Soboyejo ABO, Soboyejo WO. Modeling of fatigue in polysilicon MEMS structures Journal of Materials Science. 38: 4157-4161. DOI: 10.1023/A:1026329606103  1
2003 Mercer C, Shademan S, Soboyejo WO. An investigation of the micromechanisms of fatigue crack growth in structural gas turbine engine alloys Journal of Materials Science. 38: 291-305. DOI: 10.1023/A:1021161532639  1
2003 Bhalerao K, Shen W, Soboyejo ABO, Soboyejo WO. A probabilistic multiparameter framework for the modeling of fatigue crack growth in concrete Cement and Concrete Composites. 25: 607-615. DOI: 10.1016/S0958-9465(02)00074-4  1
2003 Lou J, Bhalerao K, Soboyejo ABO, Soboyejo WO. An investigation of fracture initiation and resistance-curve behavior in concrete Cement and Concrete Composites. 25: 599-605. DOI: 10.1016/S0958-9465(02)00073-2  1
2003 Soboyejo WO, Soboyejo ABO, Davis D. Cement and Concrete Composites: Guest Editorial Cement and Concrete Composites. 25: 573. DOI: 10.1016/S0958-9465(02)00069-0  1
2002 Soboyejo WO, Nemetski B, Allameh S, Marcantonio N, Mercer C, Ricci J. Interactions between MC3T3-E1 cells and textured Ti6Al4V surfaces. Journal of Biomedical Materials Research. 62: 56-72. PMID 12124787 DOI: 10.1002/jbm.10221  1
2002 Li M, Morris N, Mwenifumbo S, Keirstead M, Soboyejo W. Surface modification of titanium alloy using a Q-switched diode-pumped solid state laser at 355 nm Proceedings of Spie - the International Society For Optical Engineering. 4830: 206-211. DOI: 10.1117/12.486569  1
2002 Gleskova H, Wagner S, Soboyejo W, Suo Z. Electrical response of amorphous silicon thin-film transistors under mechanical strain Journal of Applied Physics. 92: 6224-6229. DOI: 10.1063/1.1513187  1
2002 Zhou J, Soboyejo WO. An investigation of the effects of crack front curvature on the crack-tip opening displacement of A707 steel International Journal of Fracture. 115: 287-304. DOI: 10.1023/A:1016316002733  1
2002 Allameh SM, Hayes RW, Loria EA, Soboyejo WO. Interfaces and dislocation substructures in a Nb-Ti base alloy: Influence of creep deformation Journal of Materials Science. 37: 2857-2864. DOI: 10.1023/A:1016075705269  1
2002 Lou J, Ye F, Li M, Soboyejo WO. Ductile layer toughening of brittle intermetallic composites Journal of Materials Science. 37: 3023-3034. DOI: 10.1023/A:1016033401151  1
2002 Shademan S, Soboyejo WO. An investigation of short fatigue crack growth in Ti-6Al-4V with colony microstructures Materials Science and Engineering A. 335: 116-127. DOI: 10.1016/S0921-5093(01)01934-7  1
2002 Zeng D, Katsube N, Zhang J, Soboyejo W. Hybrid crack-tip element and its applications Finite Elements in Analysis and Design. 38: 319-335. DOI: 10.1016/S0168-874X(01)00087-7  1
2002 Shen W, Soboyejo ABO, Soboyejo WO. Fatigue and dwell-fatigue crack growth in Ti - 6Al - 2Sn - 4Zr - 2Mo - 0.1Si with elongated α / β microstructure Tms Annual Meeting. 227-245.  1
2002 Gleskova H, Wagner S, Soboyejo W, Suo Z. Effects of mechanical strain on amorphous silicon thin-film transistors Materials Research Society Symposium - Proceedings. 715: 667-678.  1
2002 Soboyejo WO, Mercer C, Shademan S. Micromechanisms of fatigue crack growth in structural aerospace alloys Tms Annual Meeting. 163-181.  1
2002 Zhou J, Mercer C, Soboyejo WO. An investigation of the microstructure and strength of open-cell 6101 aluminum foams Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 1413-1427.  1
2002 Mercer C, Anglin PT, Soboyejo WO. An investigation of contact-induced deformation and fracture behavior in bulk amorphous alloys Proceedings of the Tms Fall Meeting. 335-344.  1
2002 Soboyejo WO, MacBagonluri F, Mercer C, Shen W. An investigation of the effects of microstructure on fatigue crack nucleation and growth in Ti-6242 Proceedings of the Tms Fall Meeting. 281-293.  1
2002 Yao N, Kung E, Allameh S, Soboyejo WO. Dual-beam focused ion beam: A multifunctional tool for nanotechnology Microscopy and Microanalysis. 8: 56-57.  1
2002 Lou J, Shrotriya P, Buchheit T, Soboyejo WO. Cyclic micro-bending and plasticity length scales in LIGA nickel MEMS structures Proceedings of the Tms Fall Meeting. 329-334.  1
2001 Li M, Katsube N, Soboyejo WO. On the interaction between transformation toughening and crack bridging by ductile layers in hybrid composites Journal of Composite Materials. 35: 1079-1110. DOI: 10.1106/0RHM-GYNR-HAAH-M48V  1
2001 Soboyejo ABO, Shademan S, Foster M, Katsube N, Soboyejo WO. A multiparameter approach to the prediction of fatigue crack growth in metallic materials Fatigue and Fracture of Engineering Materials and Structures. 24: 225-241. DOI: 10.1046/j.1460-2695.2001.00404.x  1
2001 Shademan S, Soboyejo ABO, Knott JF, Soboyejo WO. A physically-based model for the prediction of long fatigue crack growth in Ti-6Al-4V Materials Science and Engineering A. 315: 1-10. DOI: 10.1016/S0921-5093(01)01211-4  1
2001 Hayes RW, Soboyejo WO. An investigation of the creep behavior of an ordered Nb-11Al-41Ti-1.5Mo-1.5Cr intermetallic alloy Materials Science and Engineering A. 319: 827-832. DOI: 10.1016/S0921-5093(01)01068-1  1
2001 Sinha V, Soboyejo WO. An investigation of the effects of colony microstructure on fatigue crack growth in Ti-6Al-4V Materials Science and Engineering A. 319: 607-612. DOI: 10.1016/S0921-5093(01)01014-0  1
2001 Lou J, Mercer C, Soboyejo WO. An investigation of the effects of temperature on fatigue crack growth in a cast lamellar Ti-45Al-2Mn-2Nb+0.8 vol.% TiB2 alloy Materials Science and Engineering A. 319: 618-624. DOI: 10.1016/S0921-5093(01)00922-4  1
2001 Shen W, Soboyejo ABO, Soboyejo WO. Probabilistic modeling of fatigue crack growth in Ti-6Al-4V International Journal of Fatigue. 23: 917-925. DOI: 10.1016/S0142-1123(01)00045-7  1
2001 Zhou J, Soboyejo WO. A statistical model for the prediction of brittle fracture Key Engineering Materials. 163-180.  1
2001 Lou J, Soboyejo WO. An investigation of the effects of loading rate on resistance-curve behavior and toughening in cast lamellar gamma-based titanium aluminides Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 325-337.  1
2001 Soboyejo ABO, Shademan S, Sinha V, Soboyejo WO. Statistical modeling of microstructural effects on fatigue behavior of α/β titanium alloys Key Engineering Materials. 1-30.  1
2001 Soboyejo ABO, Ozkan HE, Papritan JC, Soboyejo WO. A New Multiparameter Approach to the Prediction of Wear Rates in Agricultural Sprayer Nozzles Journal of Testing and Evaluation. 29: 372-379.  1
2001 Lou J, Mercer C, Soboyejo WO. An investigation of the effects of temperature on fatigue crack growth behavior of a cast nearly lamellar Ti-47Al-2Cr-2Mn + 0.8 Vol. %TiB2 gamma titanium alloy Materials Research Society Symposium - Proceedings. 646.  1
2001 Katsube N, Soboyejo WO, Sacks M. Preface Key Engineering Materials. 198.  1
2001 Chan KS, Lou J, Soboyejo WO. Discussion of "An investigation of the effects of loading rate on resistance-curve behavior and toughening in cast lamellar gamma-based Titanium aluminides" [3] (multiple letters) Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 2136-2139.  1
2001 Chang T, Mercer C, Walter M, Soboyejo WO. Investigation of the effects of isothermal exposure on microstructural evolution and oxidation in a thermal barrier coating Key Engineering Materials. 197: 185-198.  1
2000 Li M, Schaffer H, Soboyejo WO. Transformation toughening of NiAl composites reinforced with yttria partially stabilized zirconia particles Journal of Materials Science. 35: 1339-1345. DOI: 10.1023/A:1004769705123  1
2000 Sinha V, Mercer C, Soboyejo WO. An investigation of short and long fatigue crack growth behavior of Ti-6Al-4V Materials Science and Engineering A. 287: 30-42. DOI: 10.1016/S0921-5093(00)00817-0  1
2000 Mercer C, Lou J, Soboyejo WO. An investigation of fatigue crack growth in a cast lamellar Ti-48Al-2Cr-2Nb alloy Materials Science and Engineering A. 284: 235-245. DOI: 10.1016/S0921-5093(00)00702-4  1
2000 Dubey S, Srivatsan TS, Soboyejo WO. Fatigue crack propagation and fracture characteristics of in-situ titanium-matrix composites International Journal of Fatigue. 22: 161-174. DOI: 10.1016/S0142-1123(99)00114-0  1
2000 Hayes RP, Soboyejo WO. Secondary creep in a damage tolerant niobium aluminide intermetallic Key Engineering Materials. 171: 69-76.  1
2000 Li M, Soboyejo WO. An investigation of the effects of ductile-layer thickness on the fracture behavior of nickel aluminide microlaminates Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 31: 1385-1399.  1
2000 Walter ME, Onipede B, Soboyejo W, Mercer C. Microstructural features resulting from isothermal and thermocyclic exposure of a thermal barrier coating Journal of Engineering Materials and Technology, Transactions of the Asme. 122: 333-337.  1
1999 Soboyejo WO, Ye F, Dipasquale J, Pine P. Investigation of the fatigue and fracture behavior of multicomponent Nb-11Al-41Ti-1.5Mo-1.5Cr intermetallic Journal of Materials Science. 34: 3567-3575. DOI: 10.1023/A:1004638714983  1
1999 Mercer C, Soboyejo ABO, Soboyejo WO. Micromechanisms of fatigue crack growth in a single crystal Inconel 718 nickel-based superalloy Acta Materialia. 47: 2727-2740. DOI: 10.1016/S1359-6454(99)00123-8  1
1999 Mercer C, Soboyejo ABO, Soboyejo WO. Micromechanisms of fatigue crack growth in a forged Inconel 718 nickel-based superalloy Materials Science and Engineering A. 270: 308-322. DOI: 10.1016/S0921-5093(99)00214-2  1
1999 Zeng D, Katsube N, Soboyejo W. Thermo-mechanical response of heterogeneous materials with randomly distributed transforming particles Computational Mechanics. 23: 457-465. DOI: 10.1007/s004660050425  1
1999 Li M, Soboyejo WO. Synergistic toughening of a hybrid NiAl composite reinforced with partially stabilized zirconia and molybdenum particles Materials Science and Engineering A. 271: 491-495.  1
1999 Ye F, Li M, Soboyejo WO. Investigation of toughening and resistance-curve behavior in hybrid molybdenum disilicide Journal of the American Ceramic Society. 82: 2460-2464.  1
1999 Ye F, Farkas D, Soboyejo WO. An investigation of fracture and fatigue crack growth behavior of cast niobium aluminide intermetallics Materials Science and Engineering A. 264: 81-93.  1
1999 Soboyejo ABO, Foster MA, Mercer C, Papritan JC, Soboyejo WO. New multiparameter model for the prediction of fatigue crack growth in structural metallic materials Astm Special Technical Publication. 327-343.  1
1999 Balasubramanian V, Li Y, Stotler T, Crompton J, Soboyejo A, Katsube N, Soboyejo W. New friction law for the modelling of continuous drive friction welding: Applications to 1045 steel welds Materials and Manufacturing Processes. 14: 845-860.  1
1999 Li M, Wang R, Katsube N, Soboyejo WO. An investigation of fracture behavior in layered NiAl/V composites Scripta Materialia. 40: 397-402.  1
1999 Ye F, Mercer C, Farkas D, Soboyejo WO. Fracture and fatigue crack growth behavior of forged damage-tolerant niobium aluminide intermetallics Astm Special Technical Publication. 278-298.  1
1998 Ramasundaram P, Bowman R, Soboyejo W. An investigation of fatigue and fracture in NiAl-Mo composites Materials Science and Engineering A. 248: 132-146. DOI: 10.1016/S0921-5093(98)00503-6  1
1998 Soboyejo WO, Rabeeh BM, Zhang J, Katsube N. Tensile damage in a symmetric [0/90]2S silicon-carbide fiber-reinforced titanium-matrix composite Composites Science and Technology. 58: 915-931. DOI: 10.1016/S0266-3538(97)00198-X  1
1998 Soboyejo WO, Knott JF. Mechanistically-based fracture mechanics models for the prediction of multple semi-elliptical crack growth in Q1N (HY80) pressure vessel steel under fatigue loading American Society of Mechanical Engineers, Materials Division (Publication) Md. 84: 67-71.  1
1998 Mercer C, Soboyejo ABO, Soboyejo WO. A comparison of the fatigue crack growth behavior of single crystal and polycrystalline inconel 718 American Society of Mechanical Engineers, Materials Division (Publication) Md. 84: 79-105.  1
1998 Jin O, Li Y, Soboyejo WO. An Investigation of the Effects of Layer Architecture on Tensile Damage Mechanisms in a Silicon Carbide (SiC) Fiber-Reinforced Titanium Matrix Composite Applied Composite Materials. 5: 25-47.  1
1998 Ye F, Mercer C, Soboyejo WO. An investigation of the fracture and fatigue crack growth behavior of forged damage-tolerant niobium aluminide intermetallics Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 29: 2361-2374.  1
1998 Soboyejo WO, Rabeeh B, Li Y, Soboyejo ABO, Rokhlin S. Mechanistically based models for the prediction of fatigue damage in a beta titanium alloy Fatigue and Fracture of Engineering Materials and Structures. 21: 557-568.  1
1998 Soboyejo WO, Ni Y, Li Y, Soboyejo ABO, Knott JF. A new multiparameter approach to the prediction of fatigue crack growth Fatigue and Fracture of Engineering Materials and Structures. 21: 541-555.  1
1998 Soboyejo WO, Rabeeh B, Li Y, Rokhlin S. Mechanistically-based acoustic emission models for the prediction of fatigue damage in a titanium matrix composite Nondestructive Testing and Evaluation. 14: 39-70.  1
1998 Li M, Wang R, Katsube N, Soboyejo WO. An investigation of the effects of layer thickness on the fracture behavior of layered NiAI/V composites American Society of Mechanical Engineers, Materials Division (Publication) Md. 84: 317-320.  1
1997 Dubey S, Soboyejo ABO, Soboyejo WO. Investigation of the effects of stress ratio and crack fatigue closure on the micromechanisms of fatigue crack growth in Ti-6Al-4V Acta Materialia. 45: 2777-2787. DOI: 10.1016/S1359-6454(96)00380-1  1
1997 Soboyejo WO, Rabeeh B, Li Y, Soboyejo ABO, Rokhlin S. Microplasticity and tensile damage in Ti-15V-3Cr-3Al-3Sn alloy and Ti-15V-3Cr-3Al-3Sn/SiC composite Studies in Applied Mechanics. 45: 185-194. DOI: 10.1016/S0922-5382(97)80020-7  1
1997 Soboyejo ABO, Soboyejo WO. Simplified methodologies for the characterization of fatigue crack propagation in metallic structural materials American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 369: 297-309.  1
1997 Soboyejo ABO, Soboyejo WO. A new multiparameter approach to the characterization of mechanical properties of ceramics American Society of Mechanical Engineers, Materials Division (Publication) Md. 80: 425-431.  1
1997 Mercer C, Soboyejo WO. Effects of alloying on crack-tip deformation and shielding in gamma-based titanium aluminides Acta Materialia. 45: 961-971.  1
1997 Mercer C, Soboyejo WO. Fatigue crack growth in cast gamma titanium aluminides Acta Materialia. 45: 4385-4396.  1
1997 Soboyejo WO, Soboyejo ABO, Ni Y, Mercer C. Hall-Petch and multiple linear regression equations for the prediction of mechanical properties in gamma-based titanium aluminides Materials Research Society Symposium - Proceedings. 460: 183-188.  1
1997 Soboyejo WO, Rabeeh B, Li Y, Soboyejo ABO. Mechanistically-based probabilistic methods for the prediction of fatigue damage Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 3: 2073-2082.  1
1997 Mercer C, Soboyejo ABO, Soboyejo WO. Investigation of fatigue crack growth in Inconel 718 Proceedings of the Tms Fall Meeting. 269-285.  1
1997 Soboyejo ABO, Ni Y, Mercer C, Soboyejo WO. Probabilistic approaches to the prediction of the effects of multiple parameters on the mechanical properties of gamma-based titanium aluminides Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 3: 2083-2092.  1
1997 Foster M, Soboyejo A, Katsube N, Dubey S, Soboyejo W. An investigation of the effects of multiple parameters on the fatigue crack growth behavior of Ti-6AI-4V American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 369: 323-329.  1
1997 Soboyejo WO, Mercer C, Lou K. Investigation of cleavage fracture in Mn-containing gamma-based titanium aluminides Proceedings of the Tms Fall Meeting. 319-327.  1
1997 Soboyejo WO, Sinha V, Kenner V. Mixed mode fracture in electronic packages Materials Research Society Symposium - Proceedings. 445: 263-268.  1
1997 Ye F, DiPasquale J, Soboyejo WO. Room- and elevated-temperature fatigue crack growth in damage tolerant niobium aluminide intermetallics Proceedings of the International Conference On Creep and Fracture of Engineering Materials and Structures. 521-530.  1
1997 Soboyejo WO, Ye F, Srivatsan TS. The fatigue and fracture behavior of a gamma-titanium aluminide intermetallic: Influence of ductile phase reinforcement Engineering Fracture Mechanics. 56: 379-395.  1
1997 Dubey S, Lederich RJ, Soboyejo WO. Fatigue and fracture of damage-tolerant in Situ titanium matrix composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 28: 2037-2047.  1
1997 Rangarajan S, Aswath PB, Soboyejo WO. Fatigue of in situ reinforced Ti-8.5Al-1B-1Si Journal of Materials Research. 12: 1102-1111.  1
1997 Dubey S, Soboyejo WO, Srivatsan TS. Deformation and Fracture Properties of Damage Tolerant In-situ Titanium Matrix Composites Applied Composite Materials. 4: 361-374.  1
1997 Soboyejo WO, Aswath PB, Xu L. Microstructure and the fracture behaviour of a Ti-24Al-11Nb intermetallic Journal of Materials Science. 32: 5833-5847.  1
1997 Soboyejo WO, Rabeeh B, Li Y, Rokhlin S. Interfaces and fatigue damage in a Ti-15-3/SCS-6[0/90]2s composite Materials Research Society Symposium - Proceedings. 458: 261-266.  1
1997 Srivatsan TS, Soboyejo WO, Lederich RJ. Tensile deformation and fracture behaviour of a titanium-alloy metal-matrix composite Composites Part a: Applied Science and Manufacturing. 28: 365-376.  1
1996 Rangarajan S, Aswath PB, Soboyejo WO. Microstructure development and fracture of in-situ reinforced Ti-8.5Al-1B-1Si Scripta Materialia. 35: 239-245. DOI: 10.1016/1359-6462(96)00116-9  1
1996 Mercer C, Soboyejo WO. Hall-Petch relationships in gamma titanium aluminides Scripta Materialia. 35: 17-22. DOI: 10.1016/1359-6462(96)00097-8  1
1996 Rabeeh BM, Soboyejo AB, Rokhlin SI, Soboyejo W. Fracture mechanics approaches to the prediction of fatigue life of a beta titanium alloy (Ti-15V-3Cr-3Al-3Sn) American Society of Mechanical Engineers, Materials Division (Publication) Md. 72: 205-209.  1
1996 Soboyejo WO, Mercer C. On the influence of thermomechanical processing on the fatigue and fracture behavior of gamma-based titanium aluminides. IV. Effects of alloying with V Materials and Manufacturing Processes. 11: 471-480.  1
1996 Soboyejo WO, Mercer C. On the influence of microstructure on the fracture behavior of gamma-based titanium aluminides. I. Effects of alloying with Mn Materials and Manufacturing Processes. 11: 411-430.  1
1996 Soboyejo WO, Mercer C. On the influence of thermomechanical processing on the fracture behavior of gamma-based titanium aluminides. II. Effects of alloying with Cr and Nb Materials and Manufacturing Processes. 11: 431-448.  1
1996 Soboyejo WO, Mercer C. On the influence of microstructure on the fracture behavior of gamma-based titanium aluminides. III. Effects of interstitials and microalloying with W Materials and Manufacturing Processes. 11: 449-469.  1
1996 Lu GY, Lederich R, Soboyejo W. Residual stresses and transformation toughening in MoSi2 composites reinforced with partially stabilized zirconia Materials Science and Engineering A. 210: 25-41.  1
1996 Zhang J, Lu GY, Kenner VH, Soboyejo W. Finite element analysis of a dissimilar mixed mode bimaterial interfacial fracture specimen American Society of Mechanical Engineers, Materials Division (Publication) Md. 72: 155-159.  1
1996 Soboyejo WO, Ramasundaram P, Goettler R. Damage in a [0/90]2s nicalon-reinforced CAS glass ceramic composite International Journal of Damage Mechanics. 5: 278-291.  1
1996 Soboyejo WO, Ye F, Schwartz DS. Fatigue and fracture behavior of Nb fiber-reinforced MoSi2 composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 27: 2263-2273.  1
1996 Srivatsan TS, Strangwood M, Soboyejo WO. The tensile behaviour of gamma titanium aluminide intermetallic Journal of Materials Science. 31: 2193-2198.  1
1995 Soboyejo WO, Aswath PB, Mercer C. Mechanisms of fatigue crack growth in Ti-48Al at ambient and elevated temperature Scripta Metallurgica Et Materiala. 33: 1169-1176. DOI: 10.1016/0956-716X(95)00343-T  1
1995 Shyue J, Soboyejo WO, Fraser HL. Microstructural characterization of layered interfaces in a silicon carbide fiber reinforced titanium matrix composite Scripta Metallurgica Et Materiala. 32: 1695-1700. DOI: 10.1016/0956-716X(95)00257-V  1
1995 Soboyejo WO, Rabeeh BM, Kantzos P. Interfaces and fatigue damage in a metastable beta titanium matrix composite Materials Science and Engineering A. 200: 140-155. DOI: 10.1016/0921-5093(95)07018-4  1
1995 Soboyejo WO, Rabeeh BM. An investigation of the effects of microstructure on fatigue damage in a symmetric [ 0 90]2s silicon carbide (SCS6) fiber-reinforced titanium matrix composite Materials Science and Engineering A. 200: 89-102. DOI: 10.1016/0921-5093(95)07017-6  1
1995 Soboyejo WO, Knott JF. An investigation of crack closure and the propagation of semi-elliptical fatigue cracks in Q1N (HY80) pressure vessel steel International Journal of Fatigue. 17: 577-581. DOI: 10.1016/0142-1123(96)81217-5  1
1995 Srivatsan TS, Soboyejo WO, Strangwood M. Cyclic fatigue and fracture behavior of a gamma-titanium aluminide intermetallic Engineering Fracture Mechanics. 52: 107-120. DOI: 10.1016/0013-7944(94)00330-K  1
1995 Soboyejo WO, Mercer C, Lou K, Heath S. An investigation of the fatigue and fracture behavior of mn-containing gamma titanium aluminides Metallurgical and Materials Transactions A. 26: 2275-2291. DOI: 10.1007/BF02671243  1
1995 Mercer C, Soboyejo WO. Effects of alloying on crack-tip deformation and shielding in gamma-based titaniumaluminides Fatigue and Fracture of Ordered Intermetallic Materials Ii. 17-29.  1
1995 Soboyejo WO, Aswath PB, Xu L. Investigation of the effects of heat treatment on the microstructure and fracture behavior of Ti-24Al-11Nb Fatigue and Fracture of Ordered Intermetallic Materials Ii. 85-111.  1
1995 Srivatsan TS, Strangwood M, Soboyejo WO. Cyclic deformation and fracture behavior of a gamma titanium aluminide intermetallic Fatigue and Fracture of Ordered Intermetallic Materials Ii. 113-132.  1
1995 Soboyejo WO, Ye F, Srivatsan TS. Investigation of the effect of ductile phase reinforcement on the fatigue and fracture behavior of a gamma-titanium aluminide intermetallic Fatigue and Fracture of Ordered Intermetallic Materials Ii. 391-415.  1
1995 Soboyejo WO, Ye F, Schwartz DS. Investigation of fatigue and fracture behavior in Nb fiber-reinforced MoSi2 composites American Society of Mechanical Engineers, Materials Division (Publication) Md. 69: 661-694.  1
1995 Soboyejo WO, Aswath PB, Mercer C. Cyclic deformation and fracture mechanisms in a gamma-based titanium aluminide intermetallic Fatigue and Fracture of Ordered Intermetallic Materials Ii. 57-84.  1
1994 Soboyejo WO, Mercer C. On the implications of deformation-induced crack-tip deformation in a gamma-based titanium aluminide intermetallic Scripta Metallurgica Et Materiala. 30: 1515-1520. DOI: 10.1016/0956-716X(94)90300-X  1
1994 Soboyejo WO, Lou K, McConnell M. Maganese segregation and intergranular fracture in gamma-based titanium aluminides Scripta Metallurgica Et Materiala. 31: 63-68. DOI: 10.1016/0956-716X(94)90096-5  1
1994 Soboyejo WO. Investigation of the effects of matrix microstructure and interfacial properties on the fatigue and fracture behavior of a Ti15V3Cr3Al3Sn/SCS9 composite Materials Science and Engineering A. 183: 49-58. DOI: 10.1016/0921-5093(94)90889-3  1
1993 Soboyejo WO, Lou K. Grain boundary segregation and intergranular fracture in a gamma-based titanium aluminide intermetallic Scripta Metallurgica Et Materiala. 29: 1335-1339. DOI: 10.1016/0956-716X(93)90134-E  1
1993 Soboyejo WO, Sastry SML. An investigation of the effects of ductile phase reinforcement on the mechanical behavior of advanced high temperature intermetallics Materials Science and Engineering A. 171: 95-104. DOI: 10.1016/0921-5093(93)90396-V  1
1993 Soboyejo WO, Lederich RJ. Novel approaches to the assessment of creep deformation in gamma-based titanium aluminides . 353-361.  1
1993 Soboyejo WO, Ramasundaram P, Rabeeh B, Parks JW. Investigation of the effects of matrix microstructure and interfacial properties on the fatigue and fracture behavior of a metastable titanium matrix composite American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 177: 33-44.  1
1992 Soboyejo WO. An investigation of the effects of microstructure on the fatigue and fracture behavior of α2 + β forged Ti-24Al-11Nbforged Ti-24Al-11Nb Metallurgical Transactions A. 23: 1737-1750. DOI: 10.1007/BF02804367  1
1992 Soboyejo WO. On the prediction of the fatigue propagation of semi-elliptical defects Astm Special Technical Publication. 435-448.  1
1991 Soboyejo WO, Knott JF. THE PROPAGATION OF NON‐COPLANAR SEMI‐ELLIPTICAL FATIGUE CRACKS Fatigue &Amp; Fracture of Engineering Materials &Amp; Structures. 14: 37-49. DOI: 10.1111/j.1460-2695.1991.tb00641.x  1
1991 Soboyejo WO. Investigation of room- and elevated-temperature fatigue crack growth in Ti-48Al 1
1991 Schwartz DS, Soboyejo WO. Relationships between deformation and interfaces in γ-based titanium aluminides . 65-74.  1
1990 Soboyejo WO, Knott JF. Effects of stress ratio on fatigue crack propagation in Q1N (HY80) pressure vessel steel International Journal of Fatigue. 12: 403-407. DOI: 10.1016/0142-1123(90)90005-Y  1
1990 Soboyejo WO, Knott JF. An investigation of environmental effects on fatigue crack growth in Q1N (HY80) steel Metallurgical Transactions A. 21: 2977-2983. DOI: 10.1007/BF02647218  1
1987 Soboyejo W. Fatigue of engineering materials and structures. Sheffield, UK, 15-19 September 1986 International Journal of Fatigue. 9: 251-255.  1
Show low-probability matches.