Year |
Citation |
Score |
2024 |
Li J, Yu P, Saini N, Li L. Crack-Tip Opening Displacement of Girth Welds in a Lean X70 Pipeline Steel. Materials (Basel, Switzerland). 17. PMID 38255559 DOI: 10.3390/ma17020391 |
0.322 |
|
2021 |
Shi M, Di M, Zhang J, Kannan R, Li J, Yuan X, Li L. Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel. Materials (Basel, Switzerland). 14. PMID 34443282 DOI: 10.3390/ma14164760 |
0.311 |
|
2020 |
Saini N, Mulik RS, Mahapatra MM, Sharma NK, Li L. Dissolution of laves phase by re-austenitization and tempering of creep strength enhanced ferritic steel Materials Science and Technology. 36: 631-644. DOI: 10.1080/02670836.2020.1724404 |
0.348 |
|
2020 |
Saini N, Mulik RS, Mahapatra MM, Kannan R, Sharma NK, Li L. Dissolution of δ-ferrite and its effect on mechanical properties of P92 steel welds Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 796: 139370. DOI: 10.1016/J.Msea.2020.139370 |
0.418 |
|
2020 |
Li J, Kannan R, Shi M, Lyu Z, Li L. Viability of button melting for accelerated development of chromium carbide overlay Materials Letters. 278: 128455. DOI: 10.1016/J.Matlet.2020.128455 |
0.424 |
|
2020 |
Wang Y, Kannan R, Li L. Insight into Type IV cracking in Grade 91 steel weldments Materials & Design. 190: 108570. DOI: 10.1016/J.Matdes.2020.108570 |
0.46 |
|
2020 |
Unsworth D, Driver RG, Li L. Measurement and prediction of residual stresses in welded girders Journal of Constructional Steel Research. 169: 106007. DOI: 10.1016/J.Jcsr.2020.106007 |
0.414 |
|
2020 |
Li J, Kannan R, Shi M, Li L. Solidified Microstructure of Wear-Resistant Fe-Cr-C-B Overlays Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 51: 1291-1300. DOI: 10.1007/S11663-020-01863-3 |
0.355 |
|
2019 |
Huda N, Wang Y, Li L, Gerlich AP. Effect of martensite-austenite (MA) distribution on mechanical properties of inter-critical Reheated Coarse Grain heat affected zone in X80 linepipe steel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 765: 138301. DOI: 10.1016/J.Msea.2019.138301 |
0.43 |
|
2019 |
Liu D, Wang J, Zhang Y, Kannan R, Long W, Wu M, Wang Y, Li L. Effect of Mo on microstructure and wear resistance of slag-free self-shielded metal-cored welding overlay Journal of Materials Processing Technology. 270: 82-91. DOI: 10.1016/J.Jmatprotec.2019.02.024 |
0.367 |
|
2019 |
Liu D, Long W, Wu M, Li L, Wang J, Zhang Y. Microstructure and Wear Performance of Cobalt-Containing Iron-Based Slag-Free Self-shielded Flux-Cored Wire Journal of Materials Engineering and Performance. 28: 2158-2166. DOI: 10.1007/S11665-019-04002-5 |
0.331 |
|
2019 |
Shi M, Kannan R, Zhang J, Yuan X, Li L. Effect of Zr Microalloying on Austenite Grain Size of Low-Carbon Steels Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 50: 2574-2585. DOI: 10.1007/S11663-019-01701-1 |
0.41 |
|
2019 |
Li Y, Qin F, Liu C, Li L, Zhao X, Wu Z. Influence of Annealing Treatment on Microstructure Evolution and Mechanical Property of Friction Stir Weld AZ31 Mg Alloys Journal of Wuhan University of Technology-Materials Science Edition. 34: 417-425. DOI: 10.1007/S11595-019-2068-0 |
0.414 |
|
2018 |
Kannan R, Wang Y, Bannister R, Rashid M, Li L. Homogenisation of austenite during non-equilibrium heating in hypereutectoid steels Materials Science and Technology. 34: 2271-2286. DOI: 10.1080/02670836.2018.1530422 |
0.324 |
|
2018 |
Liu D, Wu M, Long W, Li L, Wei P. Effect of simultaneous addition of ferroniobium and ferrotitanium on properties of hardfacing Materials Science and Technology. 34: 2231-2240. DOI: 10.1080/02670836.2018.1524053 |
0.323 |
|
2018 |
Wang Y, Park D, Li L. Microstructural analysis of fracture in heat-affected zone of two ×70 pipeline steel weldments Canadian Metallurgical Quarterly. 57: 129-139. DOI: 10.1080/00084433.2017.1390643 |
0.415 |
|
2018 |
Wang Y, Li L, Kannan R. Transition from Type IV to Type I cracking in heat-treated grade 91 steel weldments Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 714: 1-13. DOI: 10.1016/J.Msea.2017.12.088 |
0.421 |
|
2018 |
Wang Y, Kannan R, Li L, Suzuk Y, Ting D, Yuen S, Garcia M. Jagged cracking in the heat-affected zone of weld overlay on coke drum cladding Engineering Failure Analysis. 85: 14-25. DOI: 10.1016/J.Engfailanal.2017.12.006 |
0.47 |
|
2018 |
Li Y, Qin F, Liu C, Li L, Wu Z. Influence of Rotation Rate on Microstructure and Comprehensive Performance of FSWed Mg Alloy Journal of Materials Engineering and Performance. 27: 5635-5643. DOI: 10.1007/S11665-018-3704-0 |
0.401 |
|
2018 |
Wang Y, Kannan R, Li L. Correlation Between Intercritical Heat-Affected Zone and Type IV Creep Damage Zone in Grade 91 Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 1264-1275. DOI: 10.1007/S11661-018-4490-X |
0.454 |
|
2017 |
DiGiovanni C, Li L, Driver R, Callele L. Cracking in welded steel platform structures during hot-dip galvanization Engineering Failure Analysis. 79: 1031-1042. DOI: 10.1016/J.Engfailanal.2017.06.021 |
0.406 |
|
2017 |
Wu M, Liu F, Pu J, Anderson NE, Li L, Liu D. The Microstructure and Pitting Resistance of Weld Joints of 2205 Duplex Stainless Steel Journal of Materials Engineering and Performance. 26: 5341-5347. DOI: 10.1007/S11665-017-2976-0 |
0.423 |
|
2017 |
Kannan R, Wang Y, Li L. Microstructural Evolution of Inverse Bainite in a Hypereutectoid Low-Alloy Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 6038-6054. DOI: 10.1007/S11661-017-4373-6 |
0.314 |
|
2017 |
Park D, Amirkhiz BS, Gravel J, Wang Y, Li L, Zavadil R, Liang J, Liu P, He A, Arafin M. Effects of Heat-Affected Zone Microstructure on Fracture Toughness of Two X70 Pipe Girth Welds Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 3248-3260. DOI: 10.1007/S11661-017-4100-3 |
0.422 |
|
2017 |
Kannan R, Wang Y, Li L. Identification of Inverse Bainite in Fe-0.84C-1Cr-1Mn Hypereutectoid Low Alloy Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 948-952. DOI: 10.1007/S11661-016-3924-6 |
0.301 |
|
2016 |
Wang Y, Kannan R, Li L. Characterization of as-welded microstructure of heat-affected zone in modified 9Cr–1Mo–V–Nb steel weldment Materials Characterization. 118: 225-234. DOI: 10.1016/J.Matchar.2016.05.024 |
0.432 |
|
2016 |
Li L, Silwal B, Deceuster A. Creep rates of heat-affected zone of grade 91 pipe welds as determined by stress-relaxation test International Journal of Pressure Vessels and Piping. 146: 95-103. DOI: 10.1016/J.Ijpvp.2016.07.008 |
0.674 |
|
2016 |
Carvalho MC, Wang Y, Souza JAS, Braga EM, Li L. Characterization of phases and defects in chromium carbide overlays deposited by SAW process Engineering Failure Analysis. 60: 374-382. DOI: 10.1016/J.Engfailanal.2015.11.058 |
0.361 |
|
2016 |
Wang Y, Kannan R, Li L. Identification and Characterization of Intercritical Heat-Affected Zone in As-Welded Grade 91 Weldment Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 47: 5680-5684. DOI: 10.1007/S11661-016-3736-8 |
0.42 |
|
2016 |
Wang Y, Rao M, Li L, Luo G, Shen Q, Zhang L. Accelerated Bonding of Magnesium and Aluminum with a CuNi/Ag/CuNi Sandwich Interlayer by Plasma-Activated Sintering Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 631-636. DOI: 10.1007/S11661-015-3223-7 |
0.33 |
|
2015 |
Chen H, Li L, Kemps R, Michielsen B, Jacobs M, Snijkers F, Middelkoop V. Reactive air brazing for sealing mixed ionic electronic conducting hollow fibre membranes Acta Materialia. 88: 74-82. DOI: 10.1016/J.Actamat.2015.01.029 |
0.331 |
|
2014 |
Xu P, Li L, Zhang C(. Microstructure characterization of laser welded Ti-6Al-4V fusion zones Materials Characterization. 87: 179-185. DOI: 10.1016/J.Matchar.2013.11.005 |
0.43 |
|
2014 |
Wang Y, Luo G, Li L, Shen Q, Zhang L. Formation of intermetallic compounds in Mg–Ag–Al joints during diffusion bonding Journal of Materials Science. 49: 7298-7308. DOI: 10.1007/S10853-014-8440-8 |
0.332 |
|
2012 |
Zhang C(, Kallam R, Deceuster A, Dasu A, Li L. A thermal-mechanical coupled finite element model with experimental temperature verification for vertically stacked FPGAs Microelectronic Engineering. 91: 24-32. DOI: 10.1016/J.Mee.2011.11.011 |
0.711 |
|
2012 |
Li L, Deceuster A, Zhang C. Effect of Process Parameters on Pulsed-Laser Repair of a Directionally Solidified Superalloy Metallography, Microstructure, and Analysis. 1: 92-98. DOI: 10.1007/S13632-012-0016-X |
0.724 |
|
2011 |
Zhang C(, Li L, Deceuster A. Thermomechanical analysis of multi-bead pulsed laser powder deposition of a nickel-based superalloy Journal of Materials Processing Technology. 211: 1478-1487. DOI: 10.1016/J.Jmatprotec.2011.03.023 |
0.741 |
|
2010 |
Zhang CS, Li L. Effect of substrate dimensions on dynamics of ultrasonic consolidation. Ultrasonics. 50: 811-23. PMID 20605182 DOI: 10.1016/J.Ultras.2010.04.005 |
0.33 |
|
2009 |
Chen H, Li L, Yu W. Multiscale finite element analysis of bulk nano-particle fabrication by a mechanical method Journal of Materials Processing Technology. 209: 4243-4247. DOI: 10.1016/J.Jmatprotec.2008.11.008 |
0.306 |
|
2009 |
Zhang C(, Deceuster A, Li L. A Method for Bond Strength Evaluation for Laminated Structures with Application to Ultrasonic Consolidation Journal of Materials Engineering and Performance. 18: 1124-1132. DOI: 10.1007/S11665-008-9342-1 |
0.691 |
|
2009 |
Zhang C(, Li L. A Coupled Thermal-Mechanical Analysis of Ultrasonic Bonding Mechanism Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 40: 196-207. DOI: 10.1007/S11663-008-9224-9 |
0.435 |
|
2008 |
Zaveri N, Mahapatra M, Deceuster A, Peng Y, Li L, Zhou A. Corrosion resistance of pulsed laser-treated Ti–6Al–4V implant in simulated biofluids Electrochimica Acta. 53: 5022-5032. DOI: 10.1016/J.Electacta.2008.01.086 |
0.714 |
|
2006 |
Li L. Repair of directionally solidified superalloy GTD-111 by laser-engineered net shaping Journal of Materials Science. 41: 7886-7893. DOI: 10.1007/S10853-006-0948-0 |
0.368 |
|
2005 |
Li L, Orme K, Yu W. Effect of joint design on mechanical properties of AL7075 weldment Journal of Materials Engineering and Performance. 14: 322-326. DOI: 10.1361/10599490523940 |
0.382 |
|
2004 |
Li L. Failure analysis of aluminum alloy swing arm welded joints Journal of Failure Analysis and Prevention. 4: 52-57. DOI: 10.1007/S11668-996-0015-9 |
0.437 |
|
Show low-probability matches. |