| Year |
Citation |
Score |
| 2023 |
Magliaro J, Mohammadkhani P, Rahimidehgolan F, Altenhof W, Alpas AT. Influence of Extruded Tubing and Foam-Filler Material Pairing on the Energy Absorption of Composite AA6061/PVC Structures. Materials (Basel, Switzerland). 16. PMID 37763559 DOI: 10.3390/ma16186282 |
0.358 |
|
| 2022 |
Bondy M, Mohammadkhani P, Magliaro J, Altenhof W. Elevated Strain Rate Characterization of Compression Molded Direct/In-Line Compounded Carbon Fibre/Polyamide 66 Long Fibre Thermoplastic. Materials (Basel, Switzerland). 15. PMID 36363258 DOI: 10.3390/ma15217667 |
0.309 |
|
| 2021 |
Gudisey A, Magliaro J, Altenhof W. High capacity, adaptive energy absorption under tensile loading conditions utilizing an axial cutting deformation mode Forces in Mechanics. 2: 100004. DOI: 10.1016/j.finmec.2020.100004 |
0.331 |
|
| 2020 |
Bondy M, Altenhof W. Experimental characterisation of the mechanical properties of a carbon fibre/PA66 LFT automotive seatback under quasi-static and impact loading International Journal of Crashworthiness. 25: 401-420. DOI: 10.1080/13588265.2019.1602973 |
0.361 |
|
| 2020 |
Magliaro J, Altenhof W. Mechanical performance and crashworthiness of plates and extrusions subjected to cutting: An overview Thin-Walled Structures. 148: 106612. DOI: 10.1016/J.Tws.2020.106612 |
0.461 |
|
| 2020 |
Liu Y, Rahimidehgolan F, Altenhof W. Anisotropic compressive behavior of rigid PVC foam at strain rates up to 200 s−1 Polymer Testing. 91: 106836. DOI: 10.1016/J.Polymertesting.2020.106836 |
0.388 |
|
| 2020 |
Magliaro J, Altenhof W. Energy absorption mechanisms and capabilities for magnesium extrusions under impact International Journal of Mechanical Sciences. 179: 105667. DOI: 10.1016/J.Ijmecsci.2020.105667 |
0.491 |
|
| 2019 |
Ghasemabadian M, Kadkhodayan M, Altenhof W, Bondy M, Magliaro J. An experimental study on the energy absorption characteristics of single- and bi-layer cups under quasi-static loading International Journal of Crashworthiness. 24: 272-285. DOI: 10.1080/13588265.2018.1433348 |
0.369 |
|
| 2019 |
Magliaro J, Altenhof W. Analytical predictions of the complete mechanical response of AA6061 energy absorbers subjected to axial cutting Thin-Walled Structures. 139: 151-168. DOI: 10.1016/J.Tws.2019.03.002 |
0.453 |
|
| 2019 |
Magliaro J, Altenhof W, Gudisey A. Analytical and experimental investigations of the enhanced mechanical response of cutting deformation compared to progressive folding in AA6061 energy dissipation devices International Journal of Mechanical Sciences. 151: 808-827. DOI: 10.1016/J.Ijmecsci.2018.12.035 |
0.522 |
|
| 2019 |
Trauth A, Weidenmann KA, Altenhof W. Puncture properties of a hybrid continuous-discontinuous sheet moulding compound for structural applications Composites Part B-Engineering. 158: 46-54. DOI: 10.1016/J.Compositesb.2018.09.035 |
0.388 |
|
| 2018 |
Magliaro J, Shery P, Smith R, Altenhof W, Beeh E, Straßburger P, Grünheid T. A semi-empirical analytical model to predict the axial cutting force of AZ31B magnesium extrusions Thin-Walled Structures. 131: 360-372. DOI: 10.1016/J.Tws.2018.06.032 |
0.5 |
|
| 2018 |
Trauth A, Bondy M, Weidenmann KA, Altenhof W. Mechanical properties and damage evolution of a structural sheet molding compound based on a novel two step curing resin system Materials & Design. 143: 224-237. DOI: 10.1016/J.Matdes.2018.02.002 |
0.335 |
|
| 2018 |
Bondy M, Altenhof W. Low velocity impact testing of direct/inline compounded carbon fibre/polyamide-6 long fibre thermoplastic International Journal of Impact Engineering. 111: 66-76. DOI: 10.1016/J.Ijimpeng.2017.08.012 |
0.359 |
|
| 2017 |
Bondy M, Pinter P, Altenhof W. Experimental characterization and modelling of the elastic properties of direct compounded compression molded carbon fibre/polyamide 6 long fibre thermoplastic Materials & Design. 122: 184-196. DOI: 10.1016/J.Matdes.2017.03.010 |
0.356 |
|
| 2017 |
Amini K, Altenhof W, Yuen SCK, Opperman CJ, Nurick GN. Experimental and numerical investigation on the deformation and energy dissipation of AA6061-T6 circular extrusion subjected to blast loading International Journal of Impact Engineering. 110: 228-241. DOI: 10.1016/J.Ijimpeng.2017.02.003 |
0.552 |
|
| 2017 |
Bondy M, Jensen MR, Magliaro J, Altenhof W. Finite element modeling of a novel cutting deformation mode of AA6061-T6 tubes employing higher order Lagrangian element formulations International Journal of Impact Engineering. 110: 288-298. DOI: 10.1016/J.Ijimpeng.2016.12.013 |
0.44 |
|
| 2017 |
Dicecco S, Altenhof W, Hu H, Banting R. High-Cycle Fatigue of High-Strength Low Alloy Steel Q345 Subjected to Immersion Corrosion for Mining Wheel Applications Journal of Materials Engineering and Performance. 26: 1758-1768. DOI: 10.1007/S11665-017-2565-2 |
0.339 |
|
| 2017 |
Chen X, Altenhof W. Child Restraint Seat Installation Errors and a Simple Mechanical Device to Mitigate Misuse Advances in Intelligent Systems and Computing. 484: 599-610. DOI: 10.1007/978-3-319-41682-3_50 |
0.348 |
|
| 2016 |
Beeh E, Zhou P, Friedrich HE, Straßburger P, Grünheid T, Altenhof W, Worswick M, Kim S. Novel Concepts for the Application of Magnesium Sheets and Profiles in Crash Loaded Vehicle Areas Materials Science Forum. 879: 211-216. DOI: 10.4028/Www.Scientific.Net/Msf.879.211 |
0.439 |
|
| 2016 |
Smith R, Altenhof W, Bondy M, Lapain M. Inertial effects on the mechanical response of aluminium foam-filled braided stainless steel tubes under transverse loading International Journal of Crashworthiness. 21: 627-643. DOI: 10.1080/13588265.2016.1209851 |
0.456 |
|
| 2016 |
Smith R, Altenhof W, Lapain M. Transverse impact loading of aluminum foam filled braided stainless steel tubes International Journal of Impact Engineering. 88: 214-226. DOI: 10.1016/J.Ijimpeng.2015.10.008 |
0.43 |
|
| 2015 |
Brydges EA, Burkhart TA, Altenhof WJ, Andrews DM. Leg soft tissue position and velocity data from skin markers can be obtained with good to acceptable reliability following heel impacts. Journal of Sports Sciences. 33: 1606-13. PMID 25626597 DOI: 10.1080/02640414.2014.1003583 |
0.525 |
|
| 2014 |
Schinkel-Ivy A, Altenhof WJ, Andrews DM. Validation of a full body finite element model (THUMS) for running-type impacts to the lower extremity. Computer Methods in Biomechanics and Biomedical Engineering. 17: 137-48. PMID 22519546 DOI: 10.1080/10255842.2012.672562 |
0.579 |
|
| 2014 |
Bondy M, Altenhof W, Chen X, Snowdon A, Vrkljan B. Development of a finite element/multi-body model of a newborn infant for restraint analysis and design. Computer Methods in Biomechanics and Biomedical Engineering. 17: 149-62. PMID 22512507 DOI: 10.1080/10255842.2012.672563 |
0.313 |
|
| 2014 |
Li Z, Tonkovich A, Dicecco S, Altenhof W, Hu H, Banting R. Development and validation of a FE model of a mining vehicle tyre International Journal of Vehicle Design. 65: 176. DOI: 10.1504/Ijvd.2014.060814 |
0.767 |
|
| 2014 |
Czubernat K, Chen X, Bondy M, Altenhof W, Snowdon A, Vrkljan B. Crash performance of a preemie positioning device to enhance infant safety in vehicles International Journal of Crashworthiness. 19: 588-599. DOI: 10.1080/13588265.2014.927657 |
0.365 |
|
| 2014 |
Audysho R, Smith R, Altenhof W. Mechanical assessment and deformation mechanisms of aluminum foam filled stainless steel braided tubes subjected to transverse loading Thin-Walled Structures. 79: 95-107. DOI: 10.1016/J.Tws.2014.02.011 |
0.481 |
|
| 2014 |
Audysho R, Smith R, Altenhof W, Patel K. Aluminum foam core density and geometry influences on the deformation mechanisms of foam filled braided tubular structures in tension Materials & Design. 54: 394-413. DOI: 10.1016/J.Matdes.2013.08.030 |
0.437 |
|
| 2014 |
Li Z, DiCecco S, Altenhof W, Thomas M, Banting R, Hu H. Stress and fatigue life analyses of a five-piece rim and the proposed optimization with a two-piece rim Journal of Terramechanics. 52: 31-45. DOI: 10.1016/J.Jterra.2014.02.002 |
0.743 |
|
| 2014 |
Hou C, Czubernat K, Jin SY, Altenhof W, Maeva E, Seviaryna I, Bandyopadhyay-Ghosh S, Sain M, Gu R. Mechanical response of hard bio-based PU foams under cyclic quasi-static compressive loading conditions International Journal of Fatigue. 59: 76-89. DOI: 10.1016/J.Ijfatigue.2013.09.012 |
0.652 |
|
| 2013 |
Elmarakbi A, Krznaric V, Sennah K, Altenhof W, Chapman M. Crashworthiness of vehicle-to-pole collisions using a hybrid III three-year-old child dummy International Journal of Vehicle Systems Modelling and Testing. 8: 1. DOI: 10.1504/Ijvsmt.2013.052240 |
0.349 |
|
| 2013 |
Hassannejadasl A, Green DE, Altenhof WJ, Maris C, Mason M. Numerical modeling of multi-stage tube hydropiercing Materials and Design. 46: 235-246. DOI: 10.1016/J.Matdes.2012.10.026 |
0.437 |
|
| 2013 |
Li Z, DiCecco S, Tonkovich A, Altenhof W, Banting R, Hu H. A threaded-connection locking mechanism integrated into a multi-piece mining wheel for enhanced structural performance and safety Journal of Terramechanics. 50: 245-264. DOI: 10.1016/J.Jterra.2013.07.001 |
0.724 |
|
| 2013 |
Yuen SCK, Altenhof W, Opperman CJ, Nurick GN. Axial splitting of circular tubes by means of blast load International Journal of Impact Engineering. 53: 17-28. DOI: 10.1016/J.Ijimpeng.2012.09.003 |
0.528 |
|
| 2012 |
Tonkovich A, Li Z, DiCecco S, Altenhof W, Banting R, Hu H. Experimental observations of tyre deformation characteristics on heavy mining vehicles under static and quasi-static loading Journal of Terramechanics. 49: 215-231. DOI: 10.1016/J.Jterra.2012.05.005 |
0.77 |
|
| 2012 |
Jin SY, Altenhof W, Li Z. A parametric study on extrusion geometry and blade quantity during axial cutting deformation of circular AA6061-T6 extrusions under impact and quasi-static loading International Journal of Impact Engineering. 49: 165-178. DOI: 10.1016/J.Ijimpeng.2012.03.008 |
0.798 |
|
| 2011 |
Kapoor T, Altenhof W, Snowdon A, Howard A, Rasico J, Zhu F, Baggio D. A numerical investigation into the effect of CRS misuse on the injury potential of children in frontal and side impact crashes. Accident; Analysis and Prevention. 43: 1438-50. PMID 21545877 DOI: 10.1016/J.Aap.2011.02.022 |
0.348 |
|
| 2011 |
Jin SY, Altenhof W. Mechanical Performance of Circular AA6061-T6 Extrusions Under Axial Cutting Deformation Sae International Journal of Materials and Manufacturing. 4: 84-97. DOI: 10.4271/2011-01-0022 |
0.626 |
|
| 2011 |
Elmarakbi A, Krznaric V, Sennah K, Altenhof W, Chapman M. Dynamic analysis of Hybrid III 3-year-old child dummy in frontal collisions International Journal of Vehicle Safety. 5: 232-270. DOI: 10.1504/Ijvs.2011.042854 |
0.346 |
|
| 2011 |
Li Z, Zhang W, Kapoor T, Altenhof W. Crash analysis of a three-year-old human child model in side impacts considering normal and incorrect CRS usage International Journal of Crashworthiness. 16: 457-467. DOI: 10.1080/13588265.2011.606998 |
0.706 |
|
| 2011 |
Jin SY, Altenhof W. An analytical model on the steady-state deformation of circular tubes under an axial cutting deformation mode International Journal of Solids and Structures. 48: 269-279. DOI: 10.1016/J.Ijsolstr.2010.10.001 |
0.678 |
|
| 2011 |
Jin SY, Altenhof W. Control of load/displacement responses of AA6061-T6 and T4 circular extrusions under axial compressive loads International Journal of Impact Engineering. 38: 1-12. DOI: 10.1016/J.Ijimpeng.2010.09.001 |
0.713 |
|
| 2011 |
Turton N, Jin SY, Majumder A, An H, Vijayan V, Altenhof W, Green D. Experimentally Observed Strain Distributions Near Circular Discontinuities of AA6061-T6 Extrusions During Axial Crush Experimental Mechanics. 51: 111-129. DOI: 10.1007/S11340-010-9343-5 |
0.64 |
|
| 2010 |
Jin SY, Altenhof WJ. An Experimental Study Investigating the Influence of the Number of Blades in a Cutter Used in Axial Cutting of AA6061-T6 and T4 Round Tubes Sae International Journal of Materials and Manufacturing. 3: 174-185. DOI: 10.4271/2010-01-0380 |
0.606 |
|
| 2010 |
Vijayan V, Altenhof W, Banting R. A finite element approach for prediction of fatigue life for a three-piece mining vehicle wheel International Journal of Heavy Vehicle Systems. 17: 159-178. DOI: 10.1504/Ijhvs.2010.033180 |
0.45 |
|
| 2010 |
Kapoor T, Altenhof W, Howard A, Snowdon A, Rasico J, Zhu F, Mizuno K. Countermeasures to mitigate head and neck injuries to toddlers in frontal and lateral vehicle crash conditions International Journal of Crashworthiness. 15: 17-37. DOI: 10.1080/13588260902986010 |
0.353 |
|
| 2010 |
Jin SY, Majumder A, Altenhof W, Green D. Axial cutting of AA6061-T6 circular extrusions under impact using single- and dual-cutter configurations International Journal of Impact Engineering. 37: 735-753. DOI: 10.1016/J.Ijimpeng.2009.01.003 |
0.728 |
|
| 2009 |
Majumder A, Altenhof W, Jin SY, Kapoor T, Green D. Simulation of the axial cutting deformation of AA6061-T6 round tubes utilizing eulerian and mesh free finite element formulations Sae International Journal of Materials and Manufacturing. 1: 525-536. DOI: 10.4271/2008-01-1117 |
0.626 |
|
| 2009 |
Taherizadeh A, Ghaei A, Green DE, Altenhof WJ. Finite element simulation of springback for a channel draw process with drawbead using different hardening models International Journal of Mechanical Sciences. 51: 314-325. DOI: 10.1016/J.Ijmecsci.2009.03.001 |
0.407 |
|
| 2008 |
Kapoor T, Altenhof W, Howard A, Rasico J, Zhu F. Methods to mitigate injury to toddlers in near-side impact crashes. Accident; Analysis and Prevention. 40: 1880-92. PMID 19068290 DOI: 10.1016/J.Aap.2008.07.008 |
0.458 |
|
| 2008 |
Kapoor T, Altenhof W, Tot M, Zhang W, Howard A, Rasico J, Zhu F, Mizuno K. Load limiting behavior in CRS tether anchors as a method to mitigate head and neck injuries sustained by children in frontal crash. Traffic Injury Prevention. 9: 243-55. PMID 18570147 DOI: 10.1080/15389580801975210 |
0.37 |
|
| 2008 |
Shang R, Altenhof W, Hu H, Li N. Rotary Fatigue Analysis of Forged Magnesium Road Wheels Sae International Journal of Materials and Manufacturing. 1: 9-15. DOI: 10.4271/2008-01-0211 |
0.308 |
|
| 2008 |
Majumder A, Altenhof W, Vijayan V, Jin SY. Quasi-static axial cutting of AA6061 T4 and T6 round extrusions Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 222: 183-195. DOI: 10.1243/14644207JMDA170 |
0.339 |
|
| 2008 |
Jin SY, Altenhof W. Experimental observations of AA6061-T6 round extrusions under a cutting deformation mode with a deflector International Journal of Crashworthiness. 13: 127-138. DOI: 10.1080/13588260701740113 |
0.685 |
|
| 2007 |
Wang Q, Kapoor T, Tot M, Altenhof W, Howard A. Child restraint seat design considerations to mitigate injuries to three-year-old children in side impact crashes International Journal of Crashworthiness. 12: 629-644. DOI: 10.1080/13588260701500848 |
0.382 |
|
| 2007 |
Jin SY, Altenhof W. Comparison of the load/displacement and energy absorption performance of round and square AA6061-T6 extrusions under a cutting deformation mode International Journal of Crashworthiness. 12: 265-278. DOI: 10.1080/13588260701441183 |
0.675 |
|
| 2007 |
Akarca SS, Altenhof WJ, Alpas AT. Subsurface deformation and damage accumulation in aluminum-silicon alloys subjected to sliding contact Tribology International. 40: 735-747. DOI: 10.1016/J.Triboint.2006.06.001 |
0.424 |
|
| 2006 |
Kapoor T, Altenhof W, Wang Q, Howard A. Injury potential of a three-year-old Hybrid III dummy in forward and rearward facing positions under CMVSS 208 testing conditions. Accident; Analysis and Prevention. 38: 786-800. PMID 16540072 DOI: 10.1016/J.Aap.2006.02.005 |
0.37 |
|
| 2006 |
Yi Jin S, Altenhof W, Kapoor T. An experimental investigation into the cutting deformation mode of AA6061-T6 round extrusions Thin-Walled Structures. 44: 773-786. DOI: 10.1016/J.Tws.2006.05.009 |
0.501 |
|
| 2006 |
Cheng Q, Altenhof W, Li L. Experimental investigations on the crush behaviour of AA6061-T6 aluminum square tubes with different types of through-hole discontinuities Thin-Walled Structures. 44: 441-454. DOI: 10.1016/J.Tws.2006.03.017 |
0.487 |
|
| 2006 |
Cheng Q, Altenhof W, Jin SY, Powell C, Harte A. Energy absorption of aluminum foam filled braided stainless steel tubes under quasi-static tensile loading conditions International Journal of Mechanical Sciences. 48: 1223-1233. DOI: 10.1016/J.Ijmecsci.2006.06.009 |
0.678 |
|
| 2005 |
Arnold B, Altenhof W. Finite Element Modeling of the Axial Crushing of AA6061 T4 and T6 and AA6063 T5 Structural Square Tubes with Circular Discontinuities Sae Transactions. 114: 300-315. DOI: 10.4271/2005-01-0703 |
0.472 |
|
| 2005 |
Cheng Q, Altenhof W. Load/displacement and energy absorption performances of AA6061-T6 tubes under a cutting deformation mode International Journal of Crashworthiness. 10: 621-633. DOI: 10.1533/Ijcr.2005.0376 |
0.496 |
|
| 2005 |
Shang R, Altenhof W, Li N, Hu H. Wheel impact performance with consideration of material inhomogeneity and a simplified approach for modeling International Journal of Crashworthiness. 10: 137-150. DOI: 10.1533/Ijcr.2005.0333 |
0.475 |
|
| 2005 |
Kapoor T, Altenhof W, Howard A. The effect of using universal anchorages in child restraint seats on the injury potential for children in frontal crash International Journal of Crashworthiness. 10: 305-314. DOI: 10.1533/Ijcr.2005.0331 |
0.329 |
|
| 2005 |
Altenhof W, Powell C, Harte A, Gaspar R. An experimental investigation into the energy absorption and force/displacement characteristics of aluminum foam filled braided stainless steel tubes under quasistatic tensile loading conditions International Journal of Crashworthiness. 10: 21-31. DOI: 10.1533/Ijcr.2005.0322 |
0.491 |
|
| 2005 |
Akarca SS, Altenhof WJ, Alpas AT. Characterization and modeling of subsurface damage in a 356 aluminum alloy subjected to multiple asperity sliding contacts Tms Annual Meeting. 107-120. |
0.311 |
|
| 2004 |
Turchi R, Altenhof W, Kapoor T, Howard AW. An investigation into the head and neck injury potential of three-year-old children in forward and rearward facing child safety seats International Journal of Crashworthiness. 9: 419-431. DOI: 10.1533/Ijcr.2004.0300 |
0.344 |
|
| 2004 |
Arnold B, Altenhof W. Experimental observations on the crush characteristics of AA6061 T4 and T6 structural square tubes with and without circular discontinuities International Journal of Crashworthiness. 9: 73-87. DOI: 10.1533/Ijcr.2004.0273 |
0.478 |
|
| 2004 |
Altenhof W, Arnold B, Li Z, Nabeta O, Turchi R. A comparison of the crash performance of three-spoke and four-spoke steering wheel armatures during impact loading International Journal of Vehicle Design. 35: 186. DOI: 10.1504/Ijvd.2004.004948 |
0.447 |
|
| 2004 |
Altenhof W, Zamani N, North W, Arnold B. Dynamic stress concentrations for an axially loaded strut at discontinuities due to an elliptical hole or double circular notches International Journal of Impact Engineering. 30: 255-274. DOI: 10.1016/S0734-743X(03)00068-X |
0.623 |
|
| 2004 |
Altenhof W, Raczy A, Laframboise M, Loscher J, Alpas A. Numerical simulation of AM50A magnesium alloy under large deformation International Journal of Impact Engineering. 30: 117-142. DOI: 10.1016/S0734-743X(03)00060-5 |
0.412 |
|
| 2004 |
Raczy A, Elmadagli M, Altenhof WJ, Alpas AT. An Eulerian finite-element model for determination of deformation state of a copper subjected to orthogonal cutting Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 2393-2400. DOI: 10.1007/S11661-006-0219-3 |
0.4 |
|
| 2003 |
Harte A, Altenhof W. Uses for Stabilized Aluminum Foam in Crashworthiness and Strengthening Applications Sae Transactions. 112: 559-568. DOI: 10.4271/2003-01-1295 |
0.365 |
|
| 2003 |
Arnold B, Altenhof W, Zamani N. Numerical Determination Of Dynamic Stress Concentration Factors For An Axially Loaded Strut With Elliptical And Notch Discontinuities Organic Process Research & Development. 67. DOI: 10.2495/Op030101 |
0.418 |
|
| 2003 |
Li Z, Altenhof W, Gaspar R, Frise P. Development and analysis of a prototype car-carrier structure using the finite element method. Organic Process Research & Development. 67. DOI: 10.2495/Op030091 |
0.37 |
|
| 2003 |
Nabeta O, Altenhof W. An investigation into the crashworthiness characteristics of steering wheel armatures from common compact passenger cars International Journal of Crashworthiness. 8: 329-337. DOI: 10.1533/Ijcr.2003.0241 |
0.474 |
|
| 2003 |
Altenhof WJ, Ames W, Frise PR, Ghrib F. A comparison of the crashworthiness performance of geometrically identical aluminium and magnesium steering wheel armatures International Journal of Crashworthiness. 8: 237-246. DOI: 10.1533/Ijcr.2003.0230 |
0.398 |
|
| 2003 |
Li Z, Altenhof W, Frise P, Gaspar R, Arnold B. Experimental and numerical testing of a prototype car-carrier structure with suggested design improvements International Journal of Heavy Vehicle Systems. 10: 257. DOI: 10.1504/Ijhvs.2003.003693 |
0.396 |
|
| 2003 |
Altenhof W, Li Z, Zamani N, Arnold B. Observations on the energy absorption characteristics of a three-spoke steering wheel armature during impact Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 217: 1057-1069. DOI: 10.1243/09544070360729400 |
0.32 |
|
| 2002 |
Altenhof W, Li Z, Zamani N. An Investigation Into The Energy Absorption Characteristics Of A Four-Spoke Steering Wheel Armature Subjected To Impact Loading International Journal of Crashworthiness. 7: 97-120. DOI: 10.1533/Cras.2002.0209 |
0.411 |
|
| 2002 |
Altenhof W, Ames W. Strain rate effects for aluminum and magnesium alloys in finite element simulations of steering wheel armature impact tests Fatigue & Fracture of Engineering Materials & Structures. 25: 1149-1156. DOI: 10.1046/J.1460-2695.2002.00588.X |
0.386 |
|
| 2002 |
Altenhof W, Paonessa S, Zamani N, Gaspar R. An experimental and finite element investigation into the energy absorption characteristics of a steering wheel armature in an impact International Journal of Impact Engineering. 27: 197-212. DOI: 10.1016/S0734-743X(01)00038-0 |
0.607 |
|
| 2001 |
Altenhof W, Paonessa S, Zamani N, Gaspar R. The Effect Of Impact Velocity And Steering Wheel Orientation On The Crashworthiness Of A Steering Wheel Armature International Journal of Crashworthiness. 6: 19-32. DOI: 10.1533/Cras.2001.0159 |
0.632 |
|
| 2001 |
Altenhof W, Paonessa S, Zamani N. The distribution of energy absorbed by a three-spoke steering wheel armature in an impact with a deformable chestform Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 215: 589-601. DOI: 10.1243/0954407011528185 |
0.311 |
|
| Show low-probability matches. |
