Year |
Citation |
Score |
2016 |
Bhattacharyya A, Subhash G, Arakere N, Allison BD, McCoy B. Influence of Residual Stress and Temperature on the Cyclic Hardening Response of M50 High-Strength Bearing Steel Subjected to Rolling Contact Fatigue Journal of Engineering Materials and Technology, Transactions of the Asme. 138. DOI: 10.1115/1.4032321 |
1 |
|
2016 |
Devries M, Pittari J, Subhash G, Mills K, Haines C, Zheng JQ. Rate-Dependent Mechanical Behavior and Amorphization of Ultrafine-Grained Boron Carbide Journal of the American Ceramic Society. DOI: 10.1111/jace.14324 |
1 |
|
2016 |
Shafiq M, Subhash G. An Extended Mohr-Coulomb Model for Fracture Strength of Intact Brittle Materials under Ultrahigh Pressures Journal of the American Ceramic Society. 99: 627-630. DOI: 10.1111/jace.14026 |
1 |
|
2016 |
Subhash G, Awasthi AP, Kunka C, Jannotti P, DeVries M. In search of amorphization-resistant boron carbide Scripta Materialia. 123: 158-162. DOI: 10.1016/j.scriptamat.2016.06.012 |
1 |
|
2016 |
Kunka C, Awasthi A, Subhash G. Crystallographic and spectral equivalence of boron-carbide polymorphs Scripta Materialia. 122: 82-85. DOI: 10.1016/j.scriptamat.2016.05.010 |
1 |
|
2016 |
Trachet A, Subhash G. Microscopic and spectroscopic investigation of phase evolution within static and dynamic indentations in single-crystal silicon Materials Science and Engineering A. 673: 321-331. DOI: 10.1016/j.msea.2016.07.037 |
1 |
|
2016 |
Chen Z, Subhash G, Tulenko JS. Raman spectroscopic investigation of graphitization of diamond during spark plasma sintering of UO2-diamond composite nuclear fuel Journal of Nuclear Materials. 475: 1-5. DOI: 10.1016/j.jnucmat.2016.03.015 |
1 |
|
2016 |
Shafiq M, Subhash G. Dynamic deformation characteristics of zirconium diboride-silicon carbide under multi-axial confinement International Journal of Impact Engineering. 91: 158-169. DOI: 10.1016/j.ijimpeng.2016.01.009 |
1 |
|
2016 |
Subhash SG, Jannotti P, Subhash G. Impact response of coquina Conference Proceedings of the Society For Experimental Mechanics Series. 85: 1-4. DOI: 10.1007/978-3-319-22452-7_1 |
1 |
|
2016 |
Jannotti P, Subhash G. Measurement of residual stresses in B4C-SiC-Si ceramics using raman spectroscopy Conference Proceedings of the Society For Experimental Mechanics Series. 9: 341-345. DOI: 10.1007/978-3-319-21765-9_41 |
1 |
|
2016 |
Subhash G, Canchi S, Hong Y, Sarntinoranont M, King MA. Damage in brain tissue due to single bubble cavitation shock Conference Proceedings of the Society For Experimental Mechanics Series. 6: 1-5. DOI: 10.1007/978-3-319-21455-9_1 |
1 |
|
2016 |
Jannotti PA, Subhash G. Impact response of advanced transparent materials Proceedings - 29th International Symposium On Ballistics, Ballistics 2016. 2: 2424-2434. |
1 |
|
2015 |
Cartas A, Wang H, Subhash G, Baney R, Tulenko J. Influence of carbon nanotube dispersion in U02-Carb0n nanotube ceramic matrix composites utilizing spark plasma sintering Nuclear Technology. 189: 258-267. DOI: 10.13182/NT14-7 |
1 |
|
2015 |
Bhattacharyya A, Pandkar A, Subhash G, Arakere N. Cyclic constitutive response and effective S-N diagram of M50 NiL case-hardened bearing steel subjected to rolling contact fatigue Journal of Tribology. 137. DOI: 10.1115/1.4030689 |
1 |
|
2015 |
Kunka C, Trachet A, Subhash G. Interaction of indentation-induced cracks on single-crystal silicon carbide Journal of the American Ceramic Society. 98: 1891-1897. DOI: 10.1111/jace.13525 |
1 |
|
2015 |
Pittari J, Subhash G, Trachet A, Zheng J, Halls V, Karandikar P. The rate-dependent response of pressureless-sintered and reaction-bonded silicon carbide-based ceramics International Journal of Applied Ceramic Technology. 12: E207-E216. DOI: 10.1111/ijac.12332 |
1 |
|
2015 |
Jannotti P, Subhash G, Zheng JQ, Halls V, Karandikar PG, Salamone S, Aghajanian MK. Raman spectroscopic characterization of the core-rim structure in reaction bonded boron carbide ceramics Applied Physics Letters. 106. DOI: 10.1063/1.4906969 |
1 |
|
2015 |
Chen Z, Subhash G, Tulenko JS. Spark plasma sintering of diamond-reinforced uranium dioxide composite fuel pellets Nuclear Engineering and Design. 294: 52-59. DOI: 10.1016/j.nucengdes.2015.08.021 |
1 |
|
2015 |
Pittari J, Subhash G, Zheng J, Halls V, Jannotti P. The rate-dependent fracture toughness of silicon carbide- and boron carbide-based ceramics Journal of the European Ceramic Society. 35: 4411-4422. DOI: 10.1016/j.jeurceramsoc.2015.08.027 |
1 |
|
2015 |
Jannotti P, Subhash G, Varshneya AK. Impact-induced deformation mechanisms in unstrengthened and chemically strengthened glass bars International Journal of Impact Engineering. 75: 53-64. DOI: 10.1016/j.ijimpeng.2014.07.003 |
1 |
|
2015 |
Pandkar AS, Arakere N, Subhash G. Ratcheting-based microstructure-sensitive modeling of the cyclic hardening response of case-hardened bearing steels subject to Rolling Contact Fatigue International Journal of Fatigue. 73: 119-131. DOI: 10.1016/j.ijfatigue.2014.12.002 |
1 |
|
2015 |
Hong Y, Sarntinoranont M, Subhash G, Canchi S, King MA. Localized Tissue Surrogate Deformation due to Controlled Single Bubble Cavitation Experimental Mechanics. DOI: 10.1007/s11340-015-0024-2 |
1 |
|
2015 |
Jannotti P, Subhash G. Micro-Raman Spectroscopic Evaluation of Residual Microstresses in Reaction Bonded Boron Carbide Ceramics Conference Proceedings of the Society For Experimental Mechanics Series. 65: 39-43. DOI: 10.1007/978-3-319-06995-1_8 |
1 |
|
2015 |
Pittari J, Subhash G. Fracture Toughness Testing of Advanced Silicon Carbide Ceramics Using Digital Image Correlation Conference Proceedings of the Society For Experimental Mechanics Series. 65: 207-212. DOI: 10.1007/978-3-319-06995-1_31 |
1 |
|
2014 |
Lee SJ, King MA, Sun J, Xie HK, Subhash G, Sarntinoranont M. Measurement of viscoelastic properties in multiple anatomical regions of acute rat brain tissue slices Journal of the Mechanical Behavior of Biomedical Materials. 29: 213-224. PMID 24099950 DOI: 10.1016/j.jmbbm.2013.08.026 |
1 |
|
2014 |
Rao PM, Walter TR, Sankar B, Subhash G, Yen CF. Analysis of failure modes in three-dimensional woven composites subjected to quasi-static indentation Journal of Composite Materials. 48: 2473-2491. DOI: 10.1177/0021998313499950 |
1 |
|
2014 |
Mills DA, Alexander D, Subhash G, Sheplak M. Development of a sapphire optical pressure sensor for high-temperature applications Proceedings of Spie - the International Society For Optical Engineering. 9113. DOI: 10.1117/12.2050598 |
1 |
|
2014 |
Allison BD, Subhash G, Arakere NK, Chin H, Haluck D, Yamaguchi H. Extraction and testing of miniature compression specimens from bearing balls subjected to rolling contact fatigue Journal of Tribology. 136. DOI: 10.1115/1.4026442 |
1 |
|
2014 |
Jannotti P, Subhash G, Varshneya AK. Ball impact response of unstrengthened and chemically strengthened glass bars Journal of the American Ceramic Society. 97: 189-197. DOI: 10.1111/jace.12704 |
1 |
|
2014 |
Allison B, Subhash G, Arakere N, Haluck DA, Chin H. Influence of Initial Residual Stress on Material Properties of Bearing Steel During Rolling Contact Fatigue Tribology Transactions. 57: 533-545. DOI: 10.1080/10402004.2014.881582 |
1 |
|
2014 |
Chen Z, Subhash G, Tulenko JS. Master sintering curves for UO2 and UO2-SiC composite processed by spark plasma sintering Journal of Nuclear Materials. 454: 427-433. DOI: 10.1016/j.jnucmat.2014.08.023 |
1 |
|
2014 |
Ge L, Subhash G, Baney RH, Tulenko JS. Influence of processing parameters on thermal conductivity of uranium dioxide pellets prepared by spark plasma sintering Journal of the European Ceramic Society. 34: 1791-1801. DOI: 10.1016/j.jeurceramsoc.2014.01.018 |
1 |
|
2014 |
Pandkar AS, Arakere N, Subhash G. Microstructure-sensitive accumulation of plastic strain due to ratcheting in bearing steels subject to Rolling Contact Fatigue International Journal of Fatigue. 63: 191-202. DOI: 10.1016/j.ijfatigue.2014.01.029 |
1 |
|
2014 |
Bhattacharyya A, Subhash G, Arakere N. Evolution of subsurface plastic zone due to rolling contact fatigue of M-50 NiL case hardened bearing steel International Journal of Fatigue. 59: 102-113. DOI: 10.1016/j.ijfatigue.2013.09.010 |
1 |
|
2014 |
Shafiq M, Subhash G. A Novel Technique for the Determination of Surface Biaxial Stress under External Confinement Using Raman Spectroscopy Experimental Mechanics. 54: 763-774. DOI: 10.1007/s11340-014-9851-9 |
1 |
|
2014 |
Jannotti P, Subhash G. Damage mechanisms of chemically strengthened glass bars due to high-velocity ball impact Conference Proceedings of the Society For Experimental Mechanics Series. 3: 197-200. DOI: 10.1007/978-3-319-00768-7_24 |
1 |
|
2014 |
Londhe N, Pandkar A, Arakere NK, Subhash G. Influence of elastic modtrlas variation on L10 bearing life prediction of case hardened steels Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2014. 1: 429-440. |
1 |
|
2013 |
Orlovskaya N, Stadelmann R, Lugovy M, Subbotin V, Subhash G, Neubert M, Aneziris CG, Graule T, Kuebler J. Mechanical properties of ZrB2-SiC ceramic composites: Room temperature instantaneous behaviour Advances in Applied Ceramics. 112: 9-16. DOI: 10.1179/1743676112Y.0000000042 |
1 |
|
2013 |
Klecka MA, Subhash G, Arakere NK. Experimental and numerical modeling of surface indentation response of plastically graded materials Journal of Engineering Materials and Technology, Transactions of the Asme. 135. DOI: 10.1115/1.4024791 |
1 |
|
2013 |
Klecka MA, Subhash G, Arakere NK. Microstructure-property relationships in M50-NiL and P675 case-hardened bearing steels Tribology Transactions. 56: 1046-1059. DOI: 10.1080/10402004.2013.818393 |
1 |
|
2013 |
Yeo S, Baney R, Subhash G, Tulenko J. The influence of SiC particle size and volume fraction on the thermal conductivity of spark plasma sintered UO2-SiC composites Journal of Nuclear Materials. 442: 245-252. DOI: 10.1016/j.jnucmat.2013.09.003 |
1 |
|
2013 |
Ge L, Subhash G, Baney RH, Tulenko JS, McKenna E. Densification of uranium dioxide fuel pellets prepared by spark plasma sintering (SPS) Journal of Nuclear Materials. 435: 1-9. DOI: 10.1016/j.jnucmat.2012.12.010 |
1 |
|
2013 |
Yeo S, McKenna E, Baney R, Subhash G, Tulenko J. Enhanced thermal conductivity of uranium dioxide-silicon carbide composite fuel pellets prepared by Spark Plasma Sintering (SPS) Journal of Nuclear Materials. 433: 66-73. DOI: 10.1016/j.jnucmat.2012.09.015 |
1 |
|
2013 |
Liu J, Suryanarayana C, Ghosh D, Subhash G, An L. Synthesis of Mg-Al2O3 nanocomposites by mechanical alloying Journal of Alloys and Compounds. 563: 165-170. DOI: 10.1016/j.jallcom.2013.01.113 |
1 |
|
2013 |
Subhash G, Ghosh D, Blaber J, Zheng JQ, Halls V, Masters K. Characterization of the 3-D amorphized zone beneath a Vickers indentation in boron carbide using Raman spectroscopy Acta Materialia. 61: 3888-3896. DOI: 10.1016/j.actamat.2013.03.028 |
1 |
|
2013 |
Ghosh D, Subhash G. Recent Progress in Zr(Hf)B2 Based Ultrahigh Temperature Ceramics Handbook of Advanced Ceramics: Materials, Applications, Processing, and Properties: Second Edition. 267-299. DOI: 10.1016/B978-0-12-385469-8.00016-2 |
1 |
|
2013 |
Subhash G. Transparent Armor Materials Experimental Mechanics. 53: 1-2. DOI: 10.1007/s11340-012-9689-y |
1 |
|
2013 |
Walter TR, Subhash G, Sankar BV, Song MC, Yen CF. A Novel Method for Dynamic Short-Beam Shear Testing of 3D Woven Composites Experimental Mechanics. 53: 493-503. DOI: 10.1007/s11340-012-9659-4 |
1 |
|
2013 |
Haney EJ, Subhash G. Damage Mechanisms Perspective on Superior Ballistic Performance of Spinel over Sapphire Experimental Mechanics. 53: 31-46. DOI: 10.1007/s11340-012-9634-0 |
1 |
|
2013 |
Song MC, Sankar BV, Subhash G, Yen CF. Finite element analysis of delamination in woven composites under quasi-static indentation Computers, Materials and Continua. 35: 67-85. |
1 |
|
2013 |
Subhash G, Tulenko J. Fabrication of U02 pellets by an advanced sintering technique Transactions of the American Nuclear Society. 109: 600-602. |
1 |
|
2013 |
Subhash G, Ge L, Yeo S, Tulenko J, Baney R. Comparison of spark plasma sintering and conventional sintering of UO 2and UO2-composite fuel pellets Lwr Fuel Performance Meeting, Top Fuel 2013. 2: 771-778. |
1 |
|
2012 |
Sarntinoranont M, Lee SJ, Hong Y, King MA, Subhash G, Kwon J, Moore DF. High-strain-rate brain injury model using submerged acute rat brain tissue slices. Journal of Neurotrauma. 29: 418-29. PMID 21970544 DOI: 10.1089/neu.2011.1772 |
1 |
|
2012 |
Yeo S, Mckenna E, Baney R, Subhash G, Tulenko J. Fabrication strategies and thermal conductivity assessment of high density UO2 pellet incorporated with SiC Materials Research Society Symposium Proceedings. 1444: 9-14. DOI: 10.1557/opl.2012.1423 |
1 |
|
2012 |
Arakere NK, Subhash G. Work hardening response of M50-NiL case hardened bearing steel during shakedown in rolling contact fatigue Materials Science and Technology. 28: 34-38. DOI: 10.1179/1743284711Y.0000000060 |
1 |
|
2012 |
Ghosh D, Han H, Nino JC, Subhash G, Jones JL. Synthesis of BaTiO 3-20wt% CoFe 2O 4 nanocomposites via spark plasma sintering Journal of the American Ceramic Society. 95: 2504-2509. DOI: 10.1111/j.1551-2916.2012.05221.x |
1 |
|
2012 |
Ghosh D, Subhash G, Zheng JQ, Halls V. Influence of stress state and strain rate on structural amorphization in boron carbide Journal of Applied Physics. 111. DOI: 10.1063/1.3696971 |
1 |
|
2012 |
Jannotti P, Subhash G, Ifju P, Kreski PK, Varshneya AK. Influence of ultra-high residual compressive stress on the static and dynamic indentation response of a chemically strengthened glass Journal of the European Ceramic Society. 32: 1551-1559. DOI: 10.1016/j.jeurceramsoc.2012.01.002 |
1 |
|
2012 |
Haney EJ, Subhash G. Edge-on-impact response of a coarse-grained magnesium aluminate spinel rod International Journal of Impact Engineering. 40: 25-34. DOI: 10.1016/j.ijimpeng.2011.10.001 |
1 |
|
2012 |
Song MC, Sankar BV, Subhash G, Yen CF. Analysis of mode i delamination of z-pinned composites using a non-dimensional analytical model Composites Part B: Engineering. 43: 1776-1784. DOI: 10.1016/j.compositesb.2012.01.086 |
1 |
|
2012 |
Subhash G, Kwon J, Mei R, Moore DF. Non-Newtonian Behavior of Ballistic Gelatin at High Shear Rates Experimental Mechanics. 52: 551-560. DOI: 10.1007/s11340-011-9513-0 |
1 |
|
2011 |
Liu Q, Subhash G, Moore DF. Loading velocity dependent permeability in agarose gel under compression. Journal of the Mechanical Behavior of Biomedical Materials. 4: 974-82. PMID 21783107 DOI: 10.1016/j.jmbbm.2011.02.009 |
1 |
|
2011 |
Walter TR, Subhash G, Sankar BV, Yen CF. Comparison of impact damage resistance and tolerance of 3D woven composites using static and dynamic short beam shear tests Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. DOI: 10.2514/6.2011-1984 |
1 |
|
2011 |
Kwon J, Subhash G, Mei R, Heger I. An optical technique for determination of rheological properties of gelatin Journal of Rheology. 55: 951-964. DOI: 10.1122/1.3599676 |
1 |
|
2011 |
Klecka MA, Subhash G, Arakere NK. Determination of subsurface hardness gradients in plastically graded materials via surface indentation Journal of Tribology. 133. DOI: 10.1115/1.4003859 |
1 |
|
2011 |
Jannotti P, Subhash G, Ifju P, Kreski PK, Varshneya AK. Photoelastic Measurement of High Stress Profiles in Ion-Exchanged Glass International Journal of Applied Glass Science. 2: 275-281. DOI: 10.1111/j.2041-1294.2011.00066.x |
1 |
|
2011 |
Haney EJ, Subhash G. Rate sensitive indentation response of a coarse-grained magnesium aluminate spinel Journal of the American Ceramic Society. 94: 3960-3966. DOI: 10.1111/j.1551-2916.2011.04756.x |
1 |
|
2011 |
Blaber JA, Ghosh D, Subhash G, McCumiskey E, Taylor CR. Determination of post-yield hardening response in a ZrB2 ceramic Scripta Materialia. 65: 962-965. DOI: 10.1016/j.scriptamat.2011.08.020 |
1 |
|
2011 |
Haney EJ, Subhash G. Static and dynamic indentation response of basal and prism plane sapphire Journal of the European Ceramic Society. 31: 1713-1721. DOI: 10.1016/j.jeurceramsoc.2011.03.006 |
1 |
|
2011 |
Branch NA, Subhash G, Arakere NK, Klecka MA. A new reverse analysis to determine the constitutive response of plastically graded case hardened bearing steels International Journal of Solids and Structures. 48: 584-591. DOI: 10.1016/j.ijsolstr.2010.10.023 |
1 |
|
2011 |
Branch NA, Arakere NK, Subhash G, Klecka MA. Determination of constitutive response of plastically graded materials International Journal of Plasticity. 27: 728-738. DOI: 10.1016/j.ijplas.2010.09.001 |
1 |
|
2011 |
Haney EJ, Subhash G. Analysis of interacting cracks due to sequential indentations on sapphire Acta Materialia. 59: 3528-3536. DOI: 10.1016/j.actamat.2011.02.026 |
1 |
|
2011 |
Subhash G, Liu Q, Moore DF, Ifju PG, Haile MA. Concentration Dependence of Tensile Behavior in Agarose Gel Using Digital Image Correlation Experimental Mechanics. 51: 255-262. DOI: 10.1007/s11340-010-9354-2 |
1 |
|
2011 |
Subhash G, Corwin AD, De Boer MP. Evolution of wear characteristics and frictional behavior in MEMS devices Tribology Letters. 41: 177-189. DOI: 10.1007/s11249-010-9696-z |
1 |
|
2011 |
Ghosh D, Subhash G. Scratch studies in boron rich lightweight and ultrahigh temperature ceramic Nato Science For Peace and Security Series B: Physics and Biophysics. 83-94. DOI: 10.1007/978-90-481-9818-4-6 |
1 |
|
2011 |
Jannotti P, Subhash G, Varshneya A. Static and dynamic indentation response of Ion-Armor™ glass Ceramic Engineering and Science Proceedings. 32: 21-25. |
1 |
|
2011 |
Song MC, Sankar BV, Walter TR, Subhash G, Yen CF. Modeling of 3D woven composites containing multiple delaminations Iccm International Conferences On Composite Materials. |
1 |
|
2010 |
Kwon J, Subhash G. Compressive strain rate sensitivity of ballistic gelatin. Journal of Biomechanics. 43: 420-5. PMID 19863960 DOI: 10.1016/j.jbiomech.2009.10.008 |
1 |
|
2010 |
Liu Q, Subhash G, Moore D. Tensile and compression response of agarose gel at various strain rates Asme 2010 Summer Bioengineering Conference, Sbc 2010. 959-960. DOI: 10.1115/SBC2010-19470 |
1 |
|
2010 |
Kwon J, Lee SJ, Subhash G, King M, Sarntinoranont M. Shock induced deformation and damage in rat brain slices Asme 2010 Summer Bioengineering Conference, Sbc 2010. 297-298. DOI: 10.1115/SBC2010-19448 |
1 |
|
2010 |
Kwon J, Subhash G. Quasistatic and dynamic compressive behavior of gelatin Asme 2010 Summer Bioengineering Conference, Sbc 2010. 957-958. DOI: 10.1115/SBC2010-19406 |
1 |
|
2010 |
Kwon J, Subhash G. High shear rate behavior of gelatin Asme 2010 Summer Bioengineering Conference, Sbc 2010. 947-948. DOI: 10.1115/SBC2010-19240 |
1 |
|
2010 |
Klecka MA, Subhash G. Rate-dependent indentation response of structural ceramics Journal of the American Ceramic Society. 93: 2377-2383. DOI: 10.1111/j.1551-2916.2010.03729.x |
1 |
|
2010 |
Ghosh D, Subhash G, Orlovskaya N. Slip-line spacing in ZrB2-based ultrahigh-temperature ceramics Scripta Materialia. 62: 839-842. DOI: 10.1016/j.scriptamat.2010.02.015 |
1 |
|
2010 |
Pal S, Maiti S, Subhash G. Effect of microscopic deformation mechanisms on the dynamic response of soft cellular materials Mechanics of Materials. 42: 118-133. DOI: 10.1016/j.mechmat.2009.11.014 |
1 |
|
2010 |
Orlovskaya N, Lukich S, Subhash G, Graule T, Kuebler J. Mechanical properties of 10 mol% Sc2O3-1 mol% CeO2-89 mol% ZrO2 ceramics Journal of Power Sources. 195: 2774-2781. DOI: 10.1016/j.jpowsour.2009.11.016 |
1 |
|
2010 |
Subhash G, Hittepole P, Maiti S. Mechanical properties of PECVD thin ceramic films Journal of the European Ceramic Society. 30: 689-697. DOI: 10.1016/j.jeurceramsoc.2009.09.020 |
1 |
|
2010 |
Walter TR, Subhash G, Sankar BV, Yen CF. Monotonic and cyclic short beam shear response of 3D woven composites Composites Science and Technology. 70: 2190-2197. DOI: 10.1016/j.compscitech.2010.08.022 |
1 |
|
2010 |
Branch NA, Subhash G, Arakere NK, Klecka MA. Material-dependent representative plastic strain for the prediction of indentation hardness Acta Materialia. 58: 6487-6494. DOI: 10.1016/j.actamat.2010.08.010 |
1 |
|
2010 |
Rao PM, Sankar BV, Subhash G, Yen CF. Elastic-plastic analysis of 3D woven composites under quasi-static indentation International Sampe Symposium and Exhibition (Proceedings). |
1 |
|
2010 |
Song MC, Sankar BV, Subhash G, Yen CF. An analytical non-dimensional model for Mode I delamination of z-pinned composites 25th Technical Conference of the American Society For Composites and 14th Us-Japan Conference On Composite Materials 2010. 2: 968-982. |
1 |
|
2009 |
Walter TR, Richards AW, Subhash G. A unified phenomenological model for tensile and compressive response of polymeric foams Journal of Engineering Materials and Technology, Transactions of the Asme. 131: 0110091-0110096. DOI: 10.1115/1.3026556 |
1 |
|
2009 |
Ghosh D, Subhash G, Bourne GR. Room-temperature dislocation activity during mechanical deformation of polycrystalline ultra-high-temperature ceramics Scripta Materialia. 61: 1075-1078. DOI: 10.1016/j.scriptamat.2009.08.038 |
1 |
|
2009 |
Ghosh D, Subhash G, Bourne GR. Inelastic deformation under indentation and scratch loads in a ZrB2-SiC composite Journal of the European Ceramic Society. 29: 3053-3061. DOI: 10.1016/j.jeurceramsoc.2009.04.014 |
1 |
|
2009 |
Wucherer L, Nino JC, Subhash G. Mechanical properties of BaTiO3 open-porosity foams Journal of the European Ceramic Society. 29: 1987-1993. DOI: 10.1016/j.jeurceramsoc.2008.12.018 |
1 |
|
2009 |
Subhash G, Liu Q. Quasistatic and dynamic crushability of polymeric foams in rigid confinement International Journal of Impact Engineering. 36: 1303-1311. DOI: 10.1016/j.ijimpeng.2009.03.010 |
1 |
|
2009 |
Maiti S, Ghosh D, Subhash G. A generalized cohesive element technique for arbitrary crack motion Finite Elements in Analysis and Design. 45: 501-510. DOI: 10.1016/j.finel.2009.02.003 |
1 |
|
2009 |
Walter TR, Subhash G, Sankar BV, Yen CF. Damage modes in 3D glass fiber epoxy woven composites under high rate of impact loading Composites Part B: Engineering. 40: 584-589. DOI: 10.1016/j.compositesb.2009.04.021 |
1 |
|
2009 |
Rao MP, Sankar BV, Subhash G. Effect of Z-yarns on the stiffness and strength of three-dimensional woven composites Composites Part B: Engineering. 40: 540-551. DOI: 10.1016/j.compositesb.2009.01.011 |
1 |
|
2009 |
Rao MP, Sankar BV, Subhash G, Yen CF. Modeling quasi-static indentation of 3D woven composites 24th Annual Technical Conference of the American Society For Composites 2009 and 1st Joint Canadian-American Technical Conference On Composites. 3: 1708-1723. |
1 |
|
2009 |
Walter TR, Subhash G, Sankar BV, Yen CF. Influence of z-yarns on the inter-laminar shear strength of 3D woven composites 24th Annual Technical Conference of the American Society For Composites 2009 and 1st Joint Canadian-American Technical Conference On Composites. 4: 2363-2370. |
1 |
|
2009 |
Geubelle P, Subhash G. Dynamic response and failure of materials Asme International Mechanical Engineering Congress and Exposition, Proceedings. 12: 195. |
1 |
|
2008 |
Subhash G, Maiti S, Geubelle PH, Ghosh D. Recent advances in dynamic indentation fracture, impact damage and fragmentation of ceramics Journal of the American Ceramic Society. 91: 2777-2791. DOI: 10.1111/j.1551-2916.2008.02624.x |
1 |
|
2008 |
Subhash G, Vitton SJ, Chengyi H. Dynamic fracture and strain rate behavior of aggregates used in transportation International Journal of Geomechanics. 8: 82-90. DOI: 10.1061/(ASCE)1532-3641(2008)8:1(82) |
1 |
|
2008 |
Klecka M, Subhash G. Grain size dependence of scratch-induced damage in alumina ceramics Wear. 265: 612-619. DOI: 10.1016/j.wear.2007.12.012 |
1 |
|
2008 |
Zhang H, Maiti S, Subhash G. Evolution of shear bands in bulk metallic glasses under dynamic loading Journal of the Mechanics and Physics of Solids. 56: 2171-2187. DOI: 10.1016/j.jmps.2008.01.008 |
1 |
|
2008 |
Ghosh D, Subhash G, Orlovskaya N. Measurement of scratch-induced residual stress within SiC grains in ZrB2-SiC composite using micro-Raman spectroscopy Acta Materialia. 56: 5345-5354. DOI: 10.1016/j.actamat.2008.07.031 |
1 |
|
2008 |
de Boer MP, Corwin AD, Kotula PG, Baker MS, Michael JR, Subhash G, Shaw MJ. On-chip laboratory suite for testing of free-standing metal film mechanical properties, Part II - Experiments Acta Materialia. 56: 3313-3326. DOI: 10.1016/j.actamat.2008.03.034 |
1 |
|
2008 |
Ghosh D, Subhash G, Radhakrishnan R, Sudarshan TS. Scratch-induced microplasticity and microcracking in zirconium diboride-silicon carbide composite Acta Materialia. 56: 3011-3022. DOI: 10.1016/j.actamat.2008.02.038 |
1 |
|
2008 |
Subhash G, Ghosh D, Maiti S. Static and dynamic indentation response of fine grained boron carbide Ceramic Engineering and Science Proceedings. 28: 29-44. |
1 |
|
2008 |
Ghosh D, Subhash G. Scratch-induced deformation and residual stress measurement in zirconium diboride-silicon carbide composite Society For Experimental Mechanics - 11th International Congress and Exhibition On Experimental and Applied Mechanics 2008. 2: 744-751. |
1 |
|
2008 |
Walter TR, Subhash G. Density dependency of the mechanical behavior of sandwich core materials Society For Experimental Mechanics - 11th International Congress and Exhibition On Experimental and Applied Mechanics 2008. 3: 1677-1681. |
1 |
|
2007 |
Subhash G, Zhang H. Dynamic indentation response of ZrHf-based bulk metallic glasses Journal of Materials Research. 22: 478-485. DOI: 10.1557/jmr.2007.0058 |
1 |
|
2007 |
Yao S, Subhash G, Maiti S. Analysis of nanoindentation response of diatorp frustules Journal of Nanoscience and Nanotechnology. 7: 4465-4472. DOI: 10.1166/jnn.2007.904 |
1 |
|
2007 |
Loukus AR, Subhash G, Imaninejad M. Optimization of material properties and process parameters for tube hydroforming of aluminum extrusions Journal of Engineering Materials and Technology, Transactions of the Asme. 129: 233-241. DOI: 10.1115/1.2400259 |
1 |
|
2007 |
Subhash G, Klecka M. Ductile to brittle transition depth during single-grit scratching on alumina ceramics Journal of the American Ceramic Society. 90: 3704-3707. DOI: 10.1111/j.1551-2916.2007.01970.x |
1 |
|
2007 |
Ghosh D, Subhash G, Sudarshan TS, Radhakrishnan R, Gao XL. Dynamic indentation response of fine-grained boron carbide Journal of the American Ceramic Society. 90: 1850-1857. DOI: 10.1111/j.1551-2916.2007.01652.x |
1 |
|
2007 |
Jing X, Maiti S, Subhash G. A new analytical model for estimation of scratch-induced damage in brittle solids Journal of the American Ceramic Society. 90: 885-892. DOI: 10.1111/j.1551-2916.2006.01471.x |
1 |
|
2007 |
Zhang H, Subhash G, Maiti S. Local heating and viscosity drop during shear band evolution in bulk metallic glasses under quasistatic loading Journal of Applied Physics. 102. DOI: 10.1063/1.2771043 |
1 |
|
2007 |
Ghosh D, Subhash G, Lee CH, Yap YK. Strain-induced formation of carbon and boron clusters in boron carbide during dynamic indentation Applied Physics Letters. 91. DOI: 10.1063/1.2768316 |
1 |
|
2007 |
Subhash G, Zhang H. Shear band patterns in metallic glasses under static indentation, dynamic indentation, and scratch processes Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 2936-2942. DOI: 10.1007/s11661-007-9315-2 |
1 |
|
2006 |
Subhash G, Marszalek MA, Maiti S. Sensitivity of scratch resistance to grinding-induced damage anisotropy in silicon nitride Journal of the American Ceramic Society. 89: 2528-2536. DOI: 10.1111/j.1551-2916.2006.01073.x |
1 |
|
2006 |
Zhang HW, Subhash G, Jing XN, Kecskes LJ, Dowding RJ. Evaluation of hardness-yield strength relationships for bulk metallic glasses Philosophical Magazine Letters. 86: 333-345. DOI: 10.1080/09500830600788935 |
1 |
|
2006 |
Li H, Li K, Subhash G, Kecskes LJ, Dowding RJ. Micromechanical modeling of tungsten-based bulk metallic glass matrix composites Materials Science and Engineering A. 429: 115-123. DOI: 10.1016/j.msea.2006.05.027 |
1 |
|
2006 |
Liu Q, Subhash G. Characterization of viscoelastic properties of polymer bar using iterative deconvolution in the time domain Mechanics of Materials. 38: 1105-1117. DOI: 10.1016/j.mechmat.2006.01.001 |
1 |
|
2006 |
Li K, Gao XL, Subhash G. Effects of cell shape and strut cross-sectional area variations on the elastic properties of three-dimensional open-cell foams Journal of the Mechanics and Physics of Solids. 54: 783-806. DOI: 10.1016/j.jmps.2005.10.007 |
1 |
|
2006 |
Gao XL, Jing XN, Subhash G. Two new expanding cavity models for indentation deformations of elastic strain-hardening materials International Journal of Solids and Structures. 43: 2193-2208. DOI: 10.1016/j.ijsolstr.2005.03.062 |
1 |
|
2006 |
Subhash G, Liu Q, Gao XL. Quasistatic and high strain rate uniaxial compressive response of polymeric structural foams International Journal of Impact Engineering. 32: 1113-1126. DOI: 10.1016/j.ijimpeng.2004.11.006 |
1 |
|
2005 |
Subhash G, Yao S, Bellinger B, Gretz MR. Investigation of mechanical properties of diatom frustules using nanoindentation Journal of Nanoscience and Nanotechnology. 5: 50-56. PMID 15762160 DOI: 10.1166/jnn.2005.006 |
1 |
|
2005 |
Liu Q, Subhash G, Evensen HA. Behavior of a novel iterative deconvolution algorithm for system identification Jvc/Journal of Vibration and Control. 11: 985-1003. DOI: 10.1177/1077546305055537 |
1 |
|
2005 |
Subhash G, Corwin AD, De Boer MP. Operational wear and friction in MEMS devices 11th International Conference On Fracture 2005, Icf11. 5: 3872-3876. DOI: 10.1115/IMECE2004-60986 |
1 |
|
2005 |
Subhash G, Bandyo R. A new scratch resistance measure for structural ceramics Journal of the American Ceramic Society. 88: 918-925. DOI: 10.1111/j.1551-2916.2005.00181.x |
1 |
|
2005 |
Jing XN, Zhao JH, Subhash G, Gao XL. Anisotropic grain growth with pore drag under applied loads Materials Science and Engineering A. 412: 271-278. DOI: 10.1016/j.msea.2005.08.220 |
1 |
|
2005 |
Li H, Subhash G, Kecskes LJ, Dowding RJ. Mechanical behavior of tungsten preform reinforced bulk metallic glass composites Materials Science and Engineering A. 403: 134-143. DOI: 10.1016/j.msea.2005.04.053 |
1 |
|
2005 |
Li K, Gao XL, Subhash G. Effects of cell shape and cell wall thickness variations on the elastic properties of two-dimensional cellular solids International Journal of Solids and Structures. 42: 1777-1795. DOI: 10.1016/j.ijsolstr.2004.08.005 |
1 |
|
2005 |
Imaninejad M, Subhash G. Proportional loading of thick-walled cylinders International Journal of Pressure Vessels and Piping. 82: 129-135. DOI: 10.1016/j.ijpvp.2004.07.013 |
1 |
|
2005 |
Imaninejad M, Subhash G, Loukus A. Loading path optimization of tube hydroforming process International Journal of Machine Tools and Manufacture. 45: 1504-1514. DOI: 10.1016/j.ijmachtools.2005.01.029 |
1 |
|
2005 |
Zhang H, Jing X, Subhash G, Kecskes LJ, Dowding RJ. Investigation of shear band evolution in amorphous alloys beneath a Vickers indentation Acta Materialia. 53: 3849-3859. DOI: 10.1016/j.actamat.2005.04.036 |
1 |
|
2005 |
Liu Q, Subhash G, Gao XL. A parametric study on crushability of open-cell structural polymeric foams Journal of Porous Materials. 12: 233-248. DOI: 10.1007/s10934-005-1652-1 |
1 |
|
2005 |
Gao XL, Jing XN, Subhash G. Indentation of strain-hardening materials: A new expanding cavity model Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 1: 564-572. |
1 |
|
2005 |
Subhash G, Corwin AD, De Boer MP. Operational wear and friction in MEMS devices 11th International Conference On Fracture 2005, Icf11. 5: 3872-3876. |
1 |
|
2005 |
Subhash G, Marszalek MA, Wereszczak AA, Lance MJ. Scratch resistance and residual stresses in longitudinally and transversely ground silicon nitride Ceramic Engineering and Science Proceedings. 26: 285-292. |
1 |
|
2004 |
Subhash G, Liu Q. Crushability maps for structural polymeric foams in uniaxial loading under rigid confinement Experimental Mechanics. 44: 289-294. DOI: 10.1177/0014485104041545 |
1 |
|
2004 |
Loukus A, Subhash G, Imaninejad M. Mechanical properties and microstructural characterization of extrusion welds in AA6082-T4 Journal of Materials Science. 39: 6561-6569. DOI: 10.1023/B:JMSC.0000044896.46771.ba |
1 |
|
2004 |
Imaninejad M, Subhash G, Loukus A. Experimental and numerical investigation of free-bulge formation during hydroforming of aluminum extrusions Journal of Materials Processing Technology. 147: 247-254. DOI: 10.1016/j.jmatprotec.2004.01.004 |
1 |
|
2004 |
Imaninejad M, Subhash G, Loukus A. Influence of end-conditions during tube hydroforming of aluminum extrusions International Journal of Mechanical Sciences. 46: 1195-1212. DOI: 10.1016/j.ijmecsci.2004.08.001 |
1 |
|
2004 |
Liu Q, Subhash G. A phenomenological constitutive model for foams under large deformations Polymer Engineering and Science. 44: 463-473. DOI: 10.1002/pen.20041 |
1 |
|
2003 |
Subhash G, Zhang W. Finite element analysis of brittle cracking due to single grit rotating scratch Journal of Applied Mechanics, Transactions Asme. 70: 147-151. DOI: 10.1115/1.1526119 |
1 |
|
2003 |
Zhang W, Subhash G. Damage zone interaction due to non-oriented Vickers indentations on brittle materials Journal of Materials Science. 38: 1185-1194. DOI: 10.1023/A:1022893203086 |
1 |
|
2003 |
Zhang H, Subhash G, Kecskes LJ, Dowding RJ. Mechanical behavior of bulk (ZrHf)TiCuNiAl amorphous alloys Scripta Materialia. 49: 447-452. DOI: 10.1016/S1359-6462(03)00295-1 |
1 |
|
2003 |
Huang C, Subhash G. Influence of lateral confinement on dynamic damage evolution during uniaxial compressive response of brittle solids Journal of the Mechanics and Physics of Solids. 51: 1089-1105. DOI: 10.1016/S0022-5096(03)00002-4 |
1 |
|
2003 |
Li H, Subhash G, Gao XL, Kecskes LJ, Dowding RJ. Negative strain rate sensitivity and compositional dependence of fracture strength in Zr/Hf based bulk metallic glasses Scripta Materialia. 49: 1087-1092. DOI: 10.1016/j.scriptamat.2003.08.012 |
1 |
|
2003 |
Subhash G, Bandyo R. Wear characterization of structural ceramics using single-grit scratching Ceramic Engineering and Science Proceedings. 24: 395-400. |
1 |
|
2003 |
Altan BS, Subhash G. A nonlocal formulation based on a novel averaging scheme applicable to nanostructured materials Mechanics of Materials. 35: 281-294. |
1 |
|
2003 |
Espinosa HD, Subhash G. Dedication and preface Mechanics of Materials. 35: 175. |
1 |
|
2002 |
Subhash G, Dowding RJ, Kecskes LJ. Characterization of uniaxial compressive response of bulk amorphous Zr-Ti-Cu-Ni-Be alloy Materials Science and Engineering A. 334: 33-40. DOI: 10.1016/S0921-5093(01)01768-3 |
1 |
|
2002 |
Huang C, Subhash G, Vitton SJ. A dynamic damage growth model for uniaxial compressive response of rock aggregates Mechanics of Materials. 34: 267-277. DOI: 10.1016/S0167-6636(02)00112-6 |
1 |
|
2002 |
Subhash G, Loukus JE, Pandit SM. Application of data dependent systems approach for evaluation of fracture modes during a single-grit scratching Mechanics of Materials. 34: 25-42. DOI: 10.1016/S0167-6636(01)00083-7 |
1 |
|
2002 |
Wang H, Subhash G. An approximate upper bound approach for the single-grit rotating scratch with a conical tool on pure metal Wear. 252: 911-933. DOI: 10.1016/S0043-1648(02)00047-9 |
1 |
|
2002 |
Subhash G, Zhang W. Investigation of the overall friction coefficient in single-pass scratch test Wear. 252: 123-134. DOI: 10.1016/S0043-1648(01)00852-3 |
1 |
|
2002 |
Wang H, Subhash G. Mechanics of mixed-mode ductile material removal with a conical tool and the size dependence of the specific energy Journal of the Mechanics and Physics of Solids. 50: 1269-1296. DOI: 10.1016/S0022-5096(01)00126-0 |
1 |
|
2001 |
Fu G, Chandra A, Guha S, Subhash G. A plasticity-based model of material removal in chemical-mechanical polishing (CMP) Ieee Transactions On Semiconductor Manufacturing. 14: 406-417. DOI: 10.1109/66.964328 |
1 |
|
2001 |
Subhash G, Sulibhavi S, Zikry MA. Influence of strain-rate on the uniaxial compressive behavior of 2-D braided textile composites Composites - Part a: Applied Science and Manufacturing. 32: 1583-1591. DOI: 10.1016/S1359-835X(01)00011-2 |
1 |
|
2001 |
Zhang W, Subhash G. Finite element analysis of interacting Vickers indentations on brittle materials Acta Materialia. 49: 2961-2974. DOI: 10.1016/S1359-6454(01)00198-7 |
1 |
|
2001 |
Wang H, Subhash G, Chandra A. Characteristics of single-grit rotating scratch with a conical tool on pure titanium Wear. 249: 566-581. DOI: 10.1016/S0043-1648(01)00585-3 |
1 |
|
2001 |
Zhang W, Subhash G. An elastic-plastic-cracking model for finite element analysis of indentation cracking in brittle materials International Journal of Solids and Structures. 38: 5893-5913. DOI: 10.1016/S0020-7683(00)00406-6 |
1 |
|
2000 |
Staehler JM, Predebon WW, Pletka BJ, Subhash G. Micromechanisms of deformation in high-purity hot-pressed alumina Materials Science and Engineering A. 291: 37-45. DOI: 10.1016/S0921-5093(00)00976-X |
1 |
|
2000 |
Anton RJ, Subhash G. Dynamic Vickers indentation of brittle materials Wear. 239: 27-35. DOI: 10.1016/S0043-1648(99)00364-6 |
1 |
|
2000 |
Chandra A, Wang K, Huang Y, Subhash G, Miller MH, Qu W. Role of unloading in machining of brittle materials Journal of Manufacturing Science and Engineering, Transactions of the Asme. 122: 452-462. |
1 |
|
1999 |
Koeppel BJ, Subhash G. Influence of cold rolling and strain rate on plastic response of powder metallurgy and chemical vapor deposition rhenium Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 30: 2641-2648. |
1 |
|
Show low-probability matches. |