Year |
Citation |
Score |
2023 |
Man K, Mazumder S, Dahotre NB, Yang Y. Surface Nanostructures Enhanced Biocompatibility and Osteoinductivity of Laser-Additively Manufactured CoCrMo Alloys. Acs Omega. 8: 47658-47666. PMID 38144145 DOI: 10.1021/acsomega.3c04305 |
0.313 |
|
2023 |
Nartu MSKKY, Welk BA, Mantri SA, Taylor NL, Viswanathan GB, Dahotre NB, Banerjee R, Fraser HL. Underlying factors determining grain morphologies in high-strength titanium alloys processed by additive manufacturing. Nature Communications. 14: 3288. PMID 37280250 DOI: 10.1038/s41467-023-38885-9 |
0.303 |
|
2023 |
Mazumder S, Man K, Radhakrishnan M, Pantawane MV, Palaniappan S, Patil SM, Yang Y, Dahotre NB. Microstructure enhanced biocompatibility in laser additively manufactured CoCrMo biomedical alloy. Biomaterials Advances. 150: 213415. PMID 37079982 DOI: 10.1016/j.bioadv.2023.213415 |
0.412 |
|
2020 |
Pantawane MV, Ho YH, Robertson WB, Khan RJK, Fick DP, Dahotre NB. Thermal Assessment of Ex Vivo Laser Ablation of Cortical Bone. Acs Biomaterials Science & Engineering. 6: 2415-2426. PMID 33455309 DOI: 10.1021/acsbiomaterials.9b01559 |
0.39 |
|
2020 |
Chowdhury T, D'Souza N, Ho YH, Dahotre N, Mahbub I. Embedded Corrosion Sensing with ZnO-PVDF Sensor Textiles. Sensors (Basel, Switzerland). 20. PMID 32481573 DOI: 10.3390/S20113053 |
0.342 |
|
2020 |
Banerjee S, Pantawane MV, Dahotre NB. Laser fabrication of structural bone: surface morphology and biomineralization assessment. Lasers in Medical Science. PMID 32372236 DOI: 10.1007/s10103-020-03023-0 |
0.426 |
|
2020 |
Pantawane MV, Ho YH, Joshi SS, Dahotre NB. Computational Assessment of Thermokinetics and Associated Microstructural Evolution in Laser Powder Bed Fusion Manufacturing of Ti6Al4V Alloy. Scientific Reports. 10: 7579. PMID 32371890 DOI: 10.1038/s41598-020-63281-4 |
0.426 |
|
2020 |
Ho YH, Joshi SS, Wu TC, Hung CM, Ho NJ, Dahotre NB. In-vitro bio-corrosion behavior of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites. Materials Science & Engineering. C, Materials For Biological Applications. 109: 110632. PMID 32228958 DOI: 10.1016/J.Msec.2020.110632 |
0.392 |
|
2020 |
Pantawane MV, Dasari S, Mantri SA, Banerjee R, Dahotre NB. Rapid thermokinetics driven nanoscale vanadium clustering within martensite laths in laser powder bed fused additively manufactured Ti6Al4V Materials Research Letters. 8: 383-389. DOI: 10.1080/21663831.2020.1772396 |
0.345 |
|
2020 |
Wall MT, Pantawane MV, Joshi S, Gantz F, Ley NA, Mayer R, Spires A, Young ML, Dahotre N. Laser-coated CoFeNiCrAlTi high entropy alloy onto a H13 steel die head Surface and Coatings Technology. 387: 125473. DOI: 10.1016/J.Surfcoat.2020.125473 |
0.453 |
|
2020 |
Nartu MSKKY, Jagetia A, Chaudhary V, Mantri SA, Ivanov E, Dahotre NB, Ramanujan RV, Banerjee R. Magnetic and mechanical properties of an additively manufactured equiatomic CoFeNi complex concentrated alloy Scripta Materialia. 187: 30-36. DOI: 10.1016/J.Scriptamat.2020.05.063 |
0.411 |
|
2020 |
Nartu MSKKY, Mantri SA, Pantawane MV, Ho Y, McWilliams B, Cho K, Dahotre NB, Banerjee R. In situ reactions during direct laser deposition of Ti-B4C composites Scripta Materialia. 183: 28-32. DOI: 10.1016/J.Scriptamat.2020.03.021 |
0.389 |
|
2020 |
Kalakuntla N, Bhatia N, Patel S, Joshi SS, Wu T, Ho Y, Dahotre NB. Laser patterned hydroxyapatite surfaces on AZ31B magnesium alloy for consumable implant applications Materialia. 11: 100693. DOI: 10.1016/J.Mtla.2020.100693 |
0.59 |
|
2020 |
Nartu MSKKY, Alam T, Dasari S, Mantri SA, Gorsse S, Siller H, Dahotre N, Banerjee R. Enhanced tensile yield strength in laser additively manufactured Al0.3CoCrFeNi high entropy alloy Materialia. 9: 100522. DOI: 10.1016/J.Mtla.2019.100522 |
0.468 |
|
2020 |
Salloom R, Joshi S, Dahotre N, Srinivasan S. Laser surface engineering of B4C/Fe nano composite coating on low carbon steel: Experimental coupled with computational approach Materials & Design. 190: 108576. DOI: 10.1016/J.Matdes.2020.108576 |
0.528 |
|
2020 |
Bakkar S, Pantawane M, Gu J, Ghoshal A, Walock M, Murugan M, Young M, Dahotre N, Berman D, Aouadi S. Laser surface modification of porous yttria stabilized zirconia against CMAS degradation Ceramics International. 46: 6038-6045. DOI: 10.1016/J.Ceramint.2019.11.061 |
0.451 |
|
2019 |
Pantawane MV, Chipper RT, Robertson WB, Khan RJK, Fick DP, Dahotre NB. Evolution of surface morphology of Er:YAG laser-machined human bone. Lasers in Medical Science. PMID 31828574 DOI: 10.1007/s10103-019-02927-w |
0.395 |
|
2019 |
Lu JZ, Joshi SS, Pantawane MV, Ho YH, Wu TC, Dahotre NB. Optimization of biocompatibility in a laser surface treated Mg-AZ31B alloy. Materials Science & Engineering. C, Materials For Biological Applications. 105: 110028. PMID 31546463 DOI: 10.1016/j.msec.2019.110028 |
0.465 |
|
2019 |
Gu J, Joshi S, Ho Y, Wei B, Huang T, Lee J, Berman D, Dahotre N, Aouadi S. Oxidation-induced healing in laser-processed thermal barrier coatings Thin Solid Films. 688: 137481. DOI: 10.1016/J.Tsf.2019.137481 |
0.477 |
|
2019 |
Argade GR, Joshi SS, Ayyagari AV, Mukherjee S, Mishra RS, Dahotre NB. Tribocorrosion performance of laser additively processed high-entropy alloy coatings on aluminum Applied Physics A. 125. DOI: 10.1007/S00339-019-2573-1 |
0.541 |
|
2018 |
Kuo P, Joshi SS, Lu X, Ho Y, Xiang Y, Dahotre NB, Du J. Laser coating of bioactive glasses on bioimplant titanium alloys International Journal of Applied Glass Science. 10: 307-320. DOI: 10.1111/Ijag.12642 |
0.563 |
|
2018 |
Ley N, Joshi SS, Zhang B, Ho Y, Dahotre NB, Young ML. Laser coating of a CrMoTaWZr complex concentrated alloy onto a H13 tool steel die head Surface and Coatings Technology. 348: 150-158. DOI: 10.1016/J.Surfcoat.2018.02.038 |
0.478 |
|
2018 |
Joshi SS, Choudhuri D, Mantri SA, Banerjee R, Dahotre NB, Banerjee S. Rationalizing surface hardening of laser glazed grey cast iron via an integrated experimental and computational approach Materials & Design. 156: 570-585. DOI: 10.1016/J.Matdes.2018.07.022 |
0.51 |
|
2018 |
Ravnikar D, Rajamure RS, Trdan U, Dahotre NB, Grum J. Electrochemical and DFT studies of laser-alloyed TiB2/TiC/Al coatings on aluminium alloy Corrosion Science. 136: 18-27. DOI: 10.1016/J.Corsci.2018.02.028 |
0.512 |
|
2018 |
Mohammed S, Rajamure RS, Zhang Z, Balu P, Dahotre NB, Kovacevic R. Tailoring corrosion resistance of laser-cladded Ni/WC surface by adding rare earth elements The International Journal of Advanced Manufacturing Technology. 97: 4043-4054. DOI: 10.1007/S00170-018-2227-Z |
0.533 |
|
2017 |
Dahotre NB, Santhanakrishnan S, Joshi SS, Khan RJK, Fick DP, Robertson WB, Sheh RK, Ironside CN. Integrated experimental and computational approach to laser machining of structural bone. Medical Engineering & Physics. PMID 29229404 DOI: 10.1016/J.Medengphy.2017.11.010 |
0.46 |
|
2017 |
Wu TC, Ho YH, Joshi SS, Rajamure RS, Dahotre NB. Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material. Lasers in Medical Science. PMID 28251395 DOI: 10.1007/S10103-017-2174-1 |
0.601 |
|
2016 |
Rajitha Gunaratne GD, Khan R, Fick D, Robertson B, Dahotre N, Ironside C. A review of the physiological and histological effects of laser osteotomy. Journal of Medical Engineering & Technology. 1-12. PMID 27345105 DOI: 10.1080/03091902.2016.1199743 |
0.448 |
|
2016 |
Joshi SS, Ghamarian I, Samimi P, Katakam S, Collins PC, Dahotre NB. Crystallisation behaviour during tensile loading of laser treated Fe–Si–B metallic glass Philosophical Magazine. 97: 497-514. DOI: 10.1080/14786435.2016.1265681 |
0.784 |
|
2016 |
Joshi SS, Katakam S, Singh Arora H, Mukherjee S, Dahotre NB. Amorphous Coatings and Surfaces on Structural Materials Critical Reviews in Solid State and Materials Sciences. 41: 1-46. DOI: 10.1080/10408436.2015.1053602 |
0.763 |
|
2016 |
Kumar N, Mishra RS, Dahotre NB, Brennan RE, Doherty KJ, Cho KC. Effect of friction stir processing on microstructure and mechanical properties of laser-processed [Formula presented] alloy Materials and Design. 110: 663-675. DOI: 10.1016/J.Matdes.2016.08.039 |
0.578 |
|
2016 |
Alavi SH, Vora HD, Dahotre NB, Harimkar SP. Laser joining of plain carbon steel using Fe-based amorphous alloy filler powder Journal of Materials Processing Technology. 238: 55-64. DOI: 10.1016/J.Jmatprotec.2016.07.010 |
0.857 |
|
2016 |
Joshi SS, Lu JZ, Dahotre NB. Optimization of laser thermal treatment of Fe–Si–B metallic glass Journal of Manufacturing Processes. 24: 31-37. DOI: 10.1016/J.Jmapro.2016.07.004 |
0.531 |
|
2016 |
Vora HD, Rajamure RS, Roy A, Srinivasan SG, Sundararajan G, Banerjee R, Dahotre NB. Laser Assisted Additively Manufactured Transition Metal Coating on Aluminum Jom. 68: 1819-1829. DOI: 10.1007/S11837-016-1956-4 |
0.794 |
|
2016 |
Dahotre NB, Vora HD, Boesl B. Additive Manufacturing via Surface Engineering Jom. 68: 1759-1761. DOI: 10.1007/S11837-016-1955-5 |
0.713 |
|
2016 |
Singh A, Paul T, Katakam S, Dahotre NB, Harimkar SP. In Situ Nanocrystallization-Induced Hardening of Amorphous Alloy Matrix Composites Consolidated by Spark Plasma Sintering Jom. 1-6. DOI: 10.1007/S11837-016-1914-1 |
0.806 |
|
2015 |
Ho YH, Vora HD, Dahotre NB. Laser surface modification of AZ31B Mg alloy for bio-wettability. Journal of Biomaterials Applications. 29: 915-28. PMID 25201909 DOI: 10.1177/0885328214551156 |
0.807 |
|
2015 |
Yang YL, Yang ZY, Dong DY, Dahotre NB, Liu K, Liu YX, Niu JJ. Wettability and biomineralisation of laser cladded Si doped TiCN biocoating Materials Science and Technology (United Kingdom). 31: 1417-1424. DOI: 10.1179/1743284714Y.0000000717 |
0.532 |
|
2015 |
Vora H, Dahotre N. Laser machining of structural alumina: Influence of moving laser beam on the evolution of surface topography International Journal of Applied Ceramic Technology. 12: 665-678. DOI: 10.1111/Ijac.12223 |
0.788 |
|
2015 |
Joshi SS, Gkriniari AV, Katakam S, Dahotre NB. Dynamic crystallization during non-isothermal laser treatment of Fe-Si-B metallic glass Journal of Physics D: Applied Physics. 48. DOI: 10.1088/0022-3727/48/49/495501 |
0.802 |
|
2015 |
Joshi SS, Samimi P, Ghamarian I, Katakam S, Collins PC, Dahotre NB. Tensile behavior of laser treated Fe-Si-B metallic glass Journal of Applied Physics. 118. DOI: 10.1063/1.4934639 |
0.811 |
|
2015 |
Shon Y, Joshi SS, Katakam S, Shanker Rajamure R, Dahotre NB. Laser additive synthesis of high entropy alloy coating on aluminum: Corrosion behavior Materials Letters. 142: 122-125. DOI: 10.1016/J.Matlet.2014.11.161 |
0.82 |
|
2015 |
Vora HD, Mridha S, Katakam S, Arora HS, Mukherjee S, Dahotre NB. Thermodynamics and kinetics of laser induced transformation in zirconium based bulk metallic glass Journal of Non-Crystalline Solids. DOI: 10.1016/J.Jnoncrysol.2015.10.013 |
0.845 |
|
2015 |
Alam T, Borkar T, Joshi SS, Katakam S, Chen X, Dahotre NB, Ramanujan RV, Banerjee R. Influence of niobium on laser de-vitrification of Fe-Si-B based amorphous magnetic alloys Journal of Non-Crystalline Solids. 428: 75-81. DOI: 10.1016/J.Jnoncrysol.2015.08.001 |
0.373 |
|
2015 |
Vora HD, Dahotre NB. Surface topography in three-dimensional laser machining of structural alumina Journal of Manufacturing Processes. 19: 49-58. DOI: 10.1016/J.Jmapro.2015.04.002 |
0.784 |
|
2015 |
Rajamure RS, Vora HD, Srinivasan SG, Dahotre NB. Laser alloyed Al-W coatings on aluminum for enhanced corrosion resistance Applied Surface Science. 328: 205-214. DOI: 10.1016/J.Apsusc.2014.12.037 |
0.83 |
|
2015 |
Vora HD, Dahotre NB. Multiphysics Theoretical Evaluation of Thermal Stresses in Laser Machined Structural Alumina Lasers in Manufacturing and Materials Processing. 2: 1-23. DOI: 10.1007/S40516-014-0004-X |
0.743 |
|
2014 |
Vora HD, Shanker Rajamure R, Dahotre SN, Ho YH, Banerjee R, Dahotre NB. Integrated experimental and theoretical approach for corrosion and wear evaluation of laser surface nitrided, Ti-6Al-4V biomaterial in physiological solution. Journal of the Mechanical Behavior of Biomedical Materials. 37: 153-64. PMID 24922620 DOI: 10.1016/J.Jmbbm.2014.05.017 |
0.797 |
|
2014 |
Dahotre SN, Vora HD, Rajamure RS, Huang L, Banerjee R, He W, Dahotre NB. Laser induced nitrogen enhanced titanium surfaces for improved osseo-integration. Annals of Biomedical Engineering. 42: 50-61. PMID 23963886 DOI: 10.1007/S10439-013-0898-Z |
0.823 |
|
2014 |
Huang L, Goddard SC, Soundarapandian S, Cao Y, Dahotre NB, He W. MC3T3-E1 osteoblast adhesion to laser induced hydroxyapatite coating on Ti alloy Biomaterials and Biomedical Engineering. 1: 81-93. DOI: 10.12989/BME.2014.1.2.081 |
0.427 |
|
2014 |
Katakam S, Joshi SS, Mridha S, Mukherjee S, Dahotre NB. Laser assisted high entropy alloy coating on aluminum: Microstructural evolution Journal of Applied Physics. 116. DOI: 10.1063/1.4895137 |
0.821 |
|
2014 |
Katakam S, Devaraj A, Bowden M, Santhanakrishnan S, Smith C, Ramanujan RV, Thevuthasan S, Banerjee R, Dahotre NB. Publisher's Note: “Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study” [J. Appl. Phys. 114, 184901 (2013)] Journal of Applied Physics. 115: 049903. DOI: 10.1063/1.4864065 |
0.717 |
|
2014 |
Rajamure RS, Vora HD, Gupta N, Karewar S, Srinivasan SG, Dahotre NB. Laser surface alloying of molybdenum on aluminum for enhanced wear resistance Surface and Coatings Technology. 258: 337-342. DOI: 10.1016/J.Surfcoat.2014.08.074 |
0.808 |
|
2014 |
Smith C, Katakam S, Nag S, Chen X, Ramanujan RV, Dahotre NB, Banerjee R. Improved soft magnetic properties by laser de-vitrification of Fe-Si-B amorphous magnetic alloys Materials Letters. 122: 155-158. DOI: 10.1016/J.Matlet.2014.02.002 |
0.783 |
|
2014 |
Katakam S, Kumar V, Santhanakrishnan S, Rajamure R, Samimi P, Dahotre NB. Laser assisted Fe-based bulk amorphous coating: Thermal effects and corrosion Journal of Alloys and Compounds. 604: 266-272. DOI: 10.1016/J.Jallcom.2014.03.137 |
0.83 |
|
2014 |
Singh AK, Alavi SH, Paital SR, Dahotre NB, Harimkar SP. Structural relaxation and nanocrystallization-induced laser surface hardening of fe-based bulk amorphous alloys Jom. 66: 1080-1087. DOI: 10.1007/S11837-014-0974-3 |
0.785 |
|
2014 |
Novak TG, Vora HD, Mishra RS, Young ML, Dahotre NB. Synthesis of Al0.5CoCrCuFeNi and Al0.5CoCrFeMnNi High-Entropy Alloys by Laser Melting Metallurgical and Materials Transactions B. DOI: 10.1007/S11663-014-0170-4 |
0.796 |
|
2014 |
Veligatla M, Katakam S, Das S, Dahotre N, Gopalan R, Prabhu D, Arvindha Babu D, Choi-Yim H, Mukherjee S. Effect of Iron on the Enhancement of Magnetic Properties for Cobalt-Based Soft Magnetic Metallic Glasses Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 1019-1023. DOI: 10.1007/S11661-014-2714-2 |
0.731 |
|
2014 |
Smith C, Katakam S, Nag S, Zhang YR, Law JY, Ramanujan RV, Dahotre NB, Banerjee R. Comparison of the crystallization behavior of Fe-Si-B-Cu and Fe-Si-B-Cu-Nb-based amorphous soft magnetic alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 2998-3009. DOI: 10.1007/S11661-014-2239-8 |
0.741 |
|
2014 |
Katakam S, Dahotre N. Laser patterning of Fe–Si–B amorphous ribbons in magnetic field Applied Physics A. 117: 1241-1247. DOI: 10.1007/S00339-014-8512-2 |
0.79 |
|
2014 |
Ravnikar D, Dahotre NB, Grum J. Microstructure and mechanical properties of a laser coated TiB2/TiC/Al layer on an aluminium alloy substrate Lasers in Engineering. 29: 53-68. |
0.412 |
|
2013 |
Nag S, Paital SR, Nandawana P, Mahdak K, Ho YH, Vora HD, Banerjee R, Dahotre NB. Laser deposited biocompatible Ca-P coatings on Ti-6Al-4V: microstructural evolution and thermal modeling. Materials Science & Engineering. C, Materials For Biological Applications. 33: 165-73. PMID 25428058 DOI: 10.1016/J.Msec.2012.08.024 |
0.789 |
|
2013 |
Dahotre NB. Multiscale laser materials engineering: energy-efficient processing and materials performance Nanomaterials and Energy. 2: 64-70. DOI: 10.1680/Nme.13.00003 |
0.479 |
|
2013 |
Katakam S, Devaraj A, Bowden M, Santhanakrishnan S, Smith C, Ramanujan RV, Suntharampillai T, Banerjee R, Dahotre NB. Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study Journal of Applied Physics. 114. DOI: 10.1063/1.4829279 |
0.815 |
|
2013 |
Singh A, Katakam S, Ilavsky J, Dahotre NB, Harimkar SP. Nanocrystallization in spark plasma sintered Fe48Cr 15Mo14Y2C15B6 bulk amorphous alloy Journal of Applied Physics. 114. DOI: 10.1063/1.4817379 |
0.799 |
|
2013 |
Katakam S, Asiamah N, Santhanakrishnan S, Dahotre N. Laser in-situ synthesis of TiB2-Al composite coating for improved wear performance Surface and Coatings Technology. 236: 200-206. DOI: 10.1016/J.Surfcoat.2013.09.047 |
0.825 |
|
2013 |
Arora HS, Xu Q, Xia Z, Ho YH, Dahotre NB, Schroers J, Mukherjee S. Wettability of nanotextured metallic glass surfaces Scripta Materialia. 69: 732-735. DOI: 10.1016/J.Scriptamat.2013.08.014 |
0.324 |
|
2013 |
Moncayo MA, Santhanakrishnan S, Vora HD, Dahotre NB. Computational modeling and experimental based parametric study of multi-track laser processing on alumina Optics and Laser Technology. 48: 570-579. DOI: 10.1016/J.Optlastec.2012.11.019 |
0.806 |
|
2013 |
Du B, Paital SR, Dahotre NB. Synthesis of TiB 2-TiC/Fe nano-composite coating by laser surface engineering Optics and Laser Technology. 45: 647-653. DOI: 10.1016/J.Optlastec.2012.05.017 |
0.55 |
|
2013 |
Vora HD, Rajamure RS, Soundarapandian S, Srinivasan SG, Dahotre NB. Dilution of molybdenum on aluminum during laser surface alloying Journal of Alloys and Compounds. 570: 133-143. DOI: 10.1016/J.Jallcom.2013.03.115 |
0.824 |
|
2013 |
Moncayo MA, Santhanakrishnan S, Vora HD, Paital SR, Dahotre NB. Laser surface modification of alumina: Integrated computational and experimental analysis Ceramics International. 39: 6207-6213. DOI: 10.1016/J.Ceramint.2013.01.040 |
0.814 |
|
2013 |
Ravnikar D, Dahotre NB, Grum J. Laser coating of aluminum alloy en AW 6082-T651 with TiB2 and TiC: Microstructure and mechanical properties Applied Surface Science. 282: 914-922. DOI: 10.1016/J.Apsusc.2013.06.089 |
0.496 |
|
2013 |
Vora HD, Rajamure RS, Soundarapandian S, Srinivasan SG, Dahotre NB. Design and optimization of microstructure for improved corrosion resistance in laser surface alloyed aluminum with molybdenum International Journal of Precision Engineering and Manufacturing. 14: 1421-1432. DOI: 10.1007/S12541-013-0192-X |
0.813 |
|
2013 |
Santhanakrishnan S, Kumar N, Dendge N, Choudhuri D, Katakam S, Palanivel S, Vora HD, Banerjee R, Mishra RS, Dahotre NB. Macro- and microstructural studies of laser-processed WE43 (Mg-Y-Nd) magnesium alloy Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 44: 1190-1200. DOI: 10.1007/S11663-013-9896-7 |
0.84 |
|
2013 |
Vora HD, Santhanakrishnan S, Harimkar SP, Boetcher SKS, Dahotre NB. One-dimensional multipulse laser machining of structural alumina: Evolution of surface topography International Journal of Advanced Manufacturing Technology. 68: 69-83. DOI: 10.1007/S00170-012-4709-8 |
0.834 |
|
2013 |
Vora HD, Dahotre NB. Laser surface heat treatment and modification Advanced Materials and Processes. 171: 45-47. |
0.76 |
|
2013 |
Vora HD, Dahotre NB. Laser machining of structural ceramics American Ceramic Society Bulletin. 92: 29-30. |
0.762 |
|
2012 |
Rapheal G, Kumar S, Blawert C, Dahotre NB. Improving corrosion resistance of MRI 230D Mg alloy by hybrid coating of laser surface alloying and plasma electrolytic oxidation Materials Science Forum. 706: 1209-1214. DOI: 10.4028/Www.Scientific.Net/Msf.706-709.1209 |
0.444 |
|
2012 |
Santhanakrishnan S, Ho YH, Dahotre NB. Laser coating of hydroxyapatite on Mg for enhanced physiological corrosion resistance and biodegradability Materials Technology. 27: 273-277. DOI: 10.1179/1753555712Y.0000000022 |
0.505 |
|
2012 |
Du B, Paital SR, Dahotre NB. Pulsed laser surface modification of AZ31B with AL-Si Surface Review and Letters. 19. DOI: 10.1142/S0218625X12500151 |
0.525 |
|
2012 |
Katakam S, Santhanakrishnan S, Vora H, Hwang JY, Banerjee R, Dahotre NB. Stress-induced selective nano-crystallization in laser-processed amorphous Fe-Si-B alloys Philosophical Magazine Letters. 92: 617-624. DOI: 10.1080/09500839.2012.704416 |
0.831 |
|
2012 |
Paital SR, Bhattacharya A, Moncayo M, Ho YH, Mahdak K, Nag S, Banerjee R, Dahotre NB. Improved corrosion and wear resistance of Mg alloys via laser surface modification of Al on AZ31B Surface and Coatings Technology. 206: 2308-2315. DOI: 10.1016/J.Surfcoat.2011.10.009 |
0.567 |
|
2012 |
Katakam S, Hwang JY, Vora H, Harimkar SP, Banerjee R, Dahotre NB. Laser-induced thermal and spatial nanocrystallization of amorphous Fe-Si-B alloy Scripta Materialia. 66: 538-541. DOI: 10.1016/J.Scriptamat.2011.12.028 |
0.843 |
|
2012 |
Vora HD, Santhanakrishnan S, Harimkar SP, Boetcher SKS, Dahotre NB. Evolution of surface topography in one-dimensional laser machining of structural alumina Journal of the European Ceramic Society. 32: 4205-4218. DOI: 10.1016/J.Jeurceramsoc.2012.06.015 |
0.85 |
|
2012 |
Katakam S, Santhanakrishnan S, Dahotre NB. Fe-based amorphous coatings on AISI 4130 structural steel for corrosion resistance Jom. 64: 709-715. DOI: 10.1007/S11837-012-0338-9 |
0.816 |
|
2012 |
Katakam S, Hwang JY, Paital S, Banerjee R, Vora H, Dahotre NB. In situ laser synthesis of Fe-based amorphous matrix composite coating on structural steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 4957-4966. DOI: 10.1007/S11661-012-1312-4 |
0.85 |
|
2012 |
Singh A, Paital SR, Andapally A, Dahotre NB, Harimkar SP. Densification behavior and wear response of spark plasma sintered iron-based bulk amorphous alloys Advanced Engineering Materials. 14: 400-407. DOI: 10.1002/Adem.201100322 |
0.679 |
|
2011 |
Singh R, Tiwari SK, Mishra SK, Dahotre NB. Electrochemical and mechanical behavior of laser processed Ti-6Al-4V surface in Ringer's physiological solution. Journal of Materials Science. Materials in Medicine. 22: 1787-96. PMID 21660586 DOI: 10.1007/S10856-011-4362-Z |
0.514 |
|
2011 |
Paital SR, Bunce N, Nandwana P, Honrao C, Nag S, He W, Banerjee R, Dahotre NB. Laser surface modification for synthesis of textured bioactive and biocompatible Ca-P coatings on Ti-6Al-4V. Journal of Materials Science. Materials in Medicine. 22: 1393-406. PMID 21526409 DOI: 10.1007/S10856-011-4321-8 |
0.509 |
|
2011 |
Samant AN, Dahotre NB. Absorptivity transition in the 1.06 μm wavelength laser machining of structural ceramics International Journal of Applied Ceramic Technology. 8: 127-139. DOI: 10.1111/J.1744-7402.2009.02416.X |
0.419 |
|
2011 |
Rapheal G, Kumar S, Blawert C, Dahotre NB. Wear behavior of plasma electrolytic oxidation (PEO) and hybrid coatings of PEO and laser on MRI 230D magnesium alloy Wear. 271: 1987-1997. DOI: 10.1016/J.Wear.2010.12.013 |
0.465 |
|
2011 |
Yang Y, Serpersu K, He W, Paital SR, Dahotre NB. Osteoblast interaction with laser cladded HA and SiO2-HA coatings on Ti-6Al-4V Materials Science and Engineering C. 31: 1643-1652. DOI: 10.1016/J.Msec.2011.07.009 |
0.508 |
|
2011 |
Harimkar SP, Agarwal A, Seal S, Dahotre N. Surface engineering for energy sustainability and bio-applications Jom. 63: 69. DOI: 10.1007/S11837-011-0094-2 |
0.721 |
|
2011 |
Harimkar SP, Paital SR, Wang G, Liaw PK, Dahotre NB. Periodically laser patterned F-B-Si amorphous ribbons: Phase evolution and mechanical behavior Advanced Engineering Materials. 13: 955-960. DOI: 10.1002/Adem.201100098 |
0.762 |
|
2011 |
Vora HD, Paital SR, Harimkar SP, Boetcher SKS, Dahotre NB. Laser machining of alumina: Experimental and numerical approach for surface finish Materials Science and Technology Conference and Exhibition 2011, Ms and T'11. 2: 1493-1500. |
0.826 |
|
2010 |
Paital SR, Cao Z, He W, Dahotre NB. Wetting effects on in vitro bioactivity and in vitro biocompatibility of laser micro-textured Ca-P coating. Biofabrication. 2: 025001. PMID 20811129 DOI: 10.1088/1758-5082/2/2/025001 |
0.462 |
|
2010 |
Yang Y, Paital SR, Dahotre NB. Effects of SiO2 substitution on wettability of laser deposited Ca-P biocoating on Ti-6Al-4V. Journal of Materials Science. Materials in Medicine. 21: 2511-21. PMID 20549311 DOI: 10.1007/S10856-010-4105-6 |
0.498 |
|
2010 |
Paital SR, He W, Dahotre NB. Laser pulse dependent micro textured calcium phosphate coatings for improved wettability and cell compatibility. Journal of Materials Science. Materials in Medicine. 21: 2187-200. PMID 20464459 DOI: 10.1007/S10856-010-4085-6 |
0.477 |
|
2010 |
Dahotre NB, Paital SR, Samant AN, Daniel C. Wetting behaviour of laser synthetic surface microtextures on Ti-6Al-4V for bioapplication. Philosophical Transactions. Series a, Mathematical, Physical, and Engineering Sciences. 368: 1863-89. PMID 20308107 DOI: 10.1098/Rsta.2010.0003 |
0.531 |
|
2010 |
Yang YL, Paital SR, Dahotre NB. Wetting and in vitro bioactivity of laser processed CaP coating with presence and variation of SiO2 on Ti-6Al-4V Materials Technology. 25: 137-142. DOI: 10.1179/175355510X12723642365287 |
0.351 |
|
2010 |
Samant AN, Dahotre NB. Three-dimensional laser machining of structural ceramics Journal of Manufacturing Processes. 12: 1-7. DOI: 10.1016/J.Jmapro.2010.01.001 |
0.472 |
|
2010 |
Paital SR, He W, Daniel C, Dahotre NB. Laser process effects on physical texture and wetting in implantable Ti-alloys Jom. 62: 76-83. DOI: 10.1007/S11837-010-0093-8 |
0.545 |
|
2010 |
Harimkar SP, Agarwal A, Seal S, Dahotre NB. Surface engineering for amorphous-, nanocrystalline-, and bio-materials Jom. 62: 64. DOI: 10.1007/S11837-010-0089-4 |
0.711 |
|
2010 |
Kurella AK, Dahotre N. Fractal Approach to Hierarchically Evolved Laser Processed CaP Coatings Advanced Engineering Materials. 12: 517-521. DOI: 10.1002/Adem.200900347 |
0.561 |
|
2010 |
Rapheal G, Kumar S, Blawert C, Dahotre NB. Laser surface alloying of a creep resistant magnesium alloy MRI 230D with Al and Al2O3 Magnesium Technology. 161-166. |
0.475 |
|
2009 |
Paital SR, Dahotre NB. Wettability and kinetics of hydroxyapatite precipitation on a laser-textured Ca-P bioceramic coating. Acta Biomaterialia. 5: 2763-72. PMID 19362524 DOI: 10.1016/J.Actbio.2009.03.004 |
0.584 |
|
2009 |
Paital SR, Balani K, Agarwal A, Dahotre NB. Fabrication and evaluation of a pulse laser-induced Ca-P coating on a Ti alloy for bioapplication. Biomedical Materials (Bristol, England). 4: 015009. PMID 19020344 DOI: 10.1088/1748-6041/4/1/015009 |
0.794 |
|
2009 |
Kurella AK, Samant AN, Dahotre NB. Laser surface multilevel self-assembly of CaP- TiO2 particles Journal of Applied Physics. 105. DOI: 10.1063/1.3065460 |
0.509 |
|
2009 |
Hazra M, Mondal AK, Kumar S, Blawert C, Dahotre NB. Laser surface cladding of MRI 153M magnesium alloy with (Al+Al2O3) Surface and Coatings Technology. 203: 2292-2299. DOI: 10.1016/J.Surfcoat.2009.02.022 |
0.566 |
|
2009 |
Samant AN, Dahotre NB. An integrated computational approach to single-dimensional laser machining of magnesia Optics and Lasers in Engineering. 47: 570-577. DOI: 10.1016/J.Optlaseng.2008.10.001 |
0.432 |
|
2009 |
Paital SR, Dahotre NB. Calcium phosphate coatings for bio-implant applications: Materials, performance factors, and methodologies Materials Science and Engineering R: Reports. 66: 1-70. DOI: 10.1016/J.Mser.2009.05.001 |
0.423 |
|
2009 |
Harimkar SP, Paital SR, Singh A, Aalund R, Dahotre NB. Microstructure and properties of spark plasma sintered Fe-Cr-Mo-Y-B-C bulk metallic glass Journal of Non-Crystalline Solids. 355: 2179-2182. DOI: 10.1016/J.Jnoncrysol.2009.07.007 |
0.664 |
|
2009 |
Samant AN, Du B, Paital SR, Kumar S, Dahotre NB. Pulsed laser surface treatment of magnesium alloy: Correlation between thermal model and experimental observations Journal of Materials Processing Technology. 209: 5060-5067. DOI: 10.1016/J.Jmatprotec.2009.02.004 |
0.57 |
|
2009 |
Harimkar SP, Dahotre NB. Rapid surface microstructuring of porous alumina ceramic using continuous wave Nd:YAG laser Journal of Materials Processing Technology. 209: 4744-4749. DOI: 10.1016/J.Jmatprotec.2008.12.001 |
0.775 |
|
2009 |
Samant AN, Dahotre NB. Laser machining of structural ceramics-A review Journal of the European Ceramic Society. 29: 969-993. DOI: 10.1016/J.Jeurceramsoc.2008.11.010 |
0.455 |
|
2009 |
Paital SR, Dahotre NB. A thermal model for laser interaction with thick dielectric film on metallic substrate: Application to Ca-P layer on Ti alloy Journal of Alloys and Compounds. 487: 499-503. DOI: 10.1016/J.Jallcom.2009.07.162 |
0.547 |
|
2009 |
Samant AN, Dahotre NB. Differences in physical phenomena governing laser machining of structural ceramics Ceramics International. 35: 2093-2097. DOI: 10.1016/J.Ceramint.2008.11.013 |
0.44 |
|
2009 |
Agarwal A, Seal S, Dahotre NB. Articulation of surfaces for bio-applications Jom. 61: 52. DOI: 10.1007/S11837-009-0133-4 |
0.552 |
|
2009 |
Chen Y, Samant A, Balani K, Dahotre NB, Agarwal A. Effect of laser melting on plasma-sprayed aluminum oxide coatings reinforced with carbon nanotubes Applied Physics a: Materials Science and Processing. 94: 861-870. DOI: 10.1007/S00339-008-4990-4 |
0.777 |
|
2009 |
Samant AN, Daniel C, Chand RH, Blue CA, Dahotre NB. Computational approach to photonic drilling of silicon carbide International Journal of Advanced Manufacturing Technology. 45: 704-713. DOI: 10.1007/S00170-009-2004-0 |
0.518 |
|
2009 |
Samant AN, Du B, Dahotre NB. In-situ surface absorptivity prediction during 1.06 um wavelength laser low aspect ratio machining of structural ceramics Physica Status Solidi (a) Applications and Materials Science. 206: 1433-1439. DOI: 10.1002/Pssa.200925108 |
0.444 |
|
2009 |
Harimkar SP, Kenik EA, Shim S, Dahotre NB. Faceted surface grain morphology of rapidly solidified alumina: Characterization and potential applications Advanced Engineering Materials. 11: 1030-1033. DOI: 10.1002/Adem.200900197 |
0.731 |
|
2009 |
Samant AN, Dahotre NB. Physical effects of multipass twodimensional laser machining of structural ceramics Advanced Engineering Materials. 11: 579-585. DOI: 10.1002/Adem.200900056 |
0.472 |
|
2008 |
Singh R, Chowdhury SG, Tiwari SK, Dahotre NB. Laser surface processing of Ti6Al4V in gaseous nitrogen: corrosion performance in physiological solution. Journal of Materials Science. Materials in Medicine. 19: 1363-9. PMID 17914613 DOI: 10.1007/S10856-007-3263-7 |
0.552 |
|
2008 |
Paital SR, Dahotre NB. Review of laser based biomimetic and bioactive Ca-P coatings Materials Science and Technology. 24: 1144-1161. DOI: 10.1179/174328408X341825 |
0.531 |
|
2008 |
Daniel C, Armstrong BL, Howe JY, Dahotre NB. Controlled evolution of morphology and microstructure in laser interference-structured zirconia Journal of the American Ceramic Society. 91: 2138-2142. DOI: 10.1111/J.1551-2916.2008.02449.X |
0.515 |
|
2008 |
Mondal AK, Kumar S, Blawert C, Dahotre NB. Effect of laser surface treatment on corrosion and wear resistance of ACM720 Mg alloy Surface and Coatings Technology. 202: 3187-3198. DOI: 10.1016/J.Surfcoat.2007.11.030 |
0.532 |
|
2008 |
Basu A, Samant AN, Harimkar SP, Majumdar JD, Manna I, Dahotre NB. Laser surface coating of Fe-Cr-Mo-Y-B-C bulk metallic glass composition on AISI 4140 steel Surface and Coatings Technology. 202: 2623-2631. DOI: 10.1016/J.Surfcoat.2007.09.028 |
0.768 |
|
2008 |
Du B, Paital SR, Dahotre NB. Phase constituents and microstructure of laser synthesized TiB2-TiC reinforced composite coating on steel Scripta Materialia. 59: 1147-1150. DOI: 10.1016/J.Scriptamat.2008.07.035 |
0.488 |
|
2008 |
Harimkar SP, Dahotre NB. Microindentation fracture behavior of laser surface modified alumina ceramic Scripta Materialia. 58: 545-548. DOI: 10.1016/J.Scriptamat.2007.11.013 |
0.729 |
|
2008 |
Kurella AK, Hu MZ, Dahotre NB. Effect of microstructural evolution on wettability of laser coated calcium phosphate on titanium alloy Materials Science and Engineering C. 28: 1560-1564. DOI: 10.1016/J.Msec.2008.04.015 |
0.552 |
|
2008 |
Harimkar SP, Dahotre NB. Characterization of microstructure in laser surface modified alumina ceramic Materials Characterization. 59: 700-707. DOI: 10.1016/J.Matchar.2007.06.002 |
0.753 |
|
2008 |
Samant AN, Paital SR, Dahotre NB. Process optimization in laser surface structuring of alumina Journal of Materials Processing Technology. 203: 498-504. DOI: 10.1016/J.Jmatprotec.2007.10.055 |
0.493 |
|
2008 |
Samant AN, Dahotre NB. Computational predictions in single-dimensional laser machining of alumina International Journal of Machine Tools and Manufacture. 48: 1345-1353. DOI: 10.1016/J.Ijmachtools.2008.05.004 |
0.474 |
|
2008 |
Du B, Samant AN, Paital SR, Dahotre NB. Pulsed laser synthesis of ceramic-metal composite coating on steel Applied Surface Science. 255: 3188-3194. DOI: 10.1016/J.Apsusc.2008.09.010 |
0.561 |
|
2008 |
Balani K, Harimkar SP, Keshri A, Chen Y, Dahotre NB, Agarwal A. Multiscale wear of plasma-sprayed carbon-nanotube-reinforced aluminum oxide nanocomposite coating Acta Materialia. 56: 5984-5994. DOI: 10.1016/J.Actamat.2008.08.020 |
0.79 |
|
2008 |
Dahotre NB, Seal S. Materials and surfaces for energetics Jom. 60: 36. DOI: 10.1007/S11837-008-0114-Z |
0.326 |
|
2008 |
Samant AN, Dahotre NB. Multilevel residual stress evaluation in laser surface modified alumina ceramic Applied Physics a: Materials Science and Processing. 90: 493-499. DOI: 10.1007/S00339-007-4311-3 |
0.443 |
|
2008 |
Dahotre NB, Harimkar SP. Laser fabrication and machining of materials Laser Fabrication and Machining of Materials. 1-558. DOI: 10.1007/978-0-387-72344-0 |
0.708 |
|
2008 |
Samant AN, Dahotre NB. Ab initio physical analysis of single dimensional laser machining of silicon nitride Advanced Engineering Materials. 10: 978-981. DOI: 10.1002/Adem.200800146 |
0.473 |
|
2007 |
Paital SR, Dahotre NB. Laser surface treatment for porous and textured Ca-P bio-ceramic coating on Ti-6Al-4V. Biomedical Materials (Bristol, England). 2: 274-81. PMID 18458486 DOI: 10.1088/1748-6041/2/4/011 |
0.555 |
|
2007 |
Balani K, Chen Y, Harimkar SP, Dahotre NB, Agarwal A. Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution. Acta Biomaterialia. 3: 944-51. PMID 17646138 DOI: 10.1016/J.Actbio.2007.06.001 |
0.773 |
|
2007 |
Singh R, Dahotre NB. Corrosion degradation and prevention by surface modification of biometallic materials. Journal of Materials Science. Materials in Medicine. 18: 725-51. PMID 17143737 DOI: 10.1007/S10856-006-0016-Y |
0.4 |
|
2007 |
Mondal AK, Kumar S, Blawer C, Dahotre NB. Effect of laser surface treatment on microstructure and properties of MRI 230D Mg alloy Materials Science Forum. 539: 1153-1158. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.1153 |
0.575 |
|
2007 |
Samant AN, Harimkar SP, Dahotre NB. Laser beam operation mode dependent grain morphology of alumina Journal of Applied Physics. 102. DOI: 10.1063/1.2825403 |
0.726 |
|
2007 |
Harimkar SP, Samant AN, Dahotre NB. Temporally evolved recoil pressure driven melt infiltration during laser surface modifications of porous alumina ceramic Journal of Applied Physics. 101. DOI: 10.1063/1.2710288 |
0.751 |
|
2007 |
Harimkar SP, Daniel C, Holzapfel C, Leibenguth P, Mücklich F, Dahotre NB. Validation of crystallographic correlation for faceted morphology in laser surface engineered alumina ceramic Scripta Materialia. 57: 401-404. DOI: 10.1016/J.Scriptamat.2007.05.008 |
0.745 |
|
2007 |
Jackson MJ, Khangar A, Chen X, Robinson GM, Venkatesh VC, Dahotre NB. Laser cleaning and dressing of vitrified grinding wheels Journal of Materials Processing Technology. 185: 17-23. DOI: 10.1016/J.Jmatprotec.2006.03.109 |
0.525 |
|
2007 |
Kadolkar PB, Watkins TR, De Hosson JTM, Kooi BJ, Dahotre NB. State of residual stress in laser-deposited ceramic composite coatings on aluminum alloys Acta Materialia. 55: 1203-1214. DOI: 10.1016/J.Actamat.2006.07.049 |
0.454 |
|
2007 |
Samant AP, Harimkar SP, Dahotre NB. The laser surface modification of advanced ceramics: A modeling approach Jom. 59: 35-38. DOI: 10.1007/S11837-007-0101-9 |
0.744 |
|
2007 |
Samant AN, Dahotre NB. Computational prediction of grain size during rapid laser surface modification of Al-O ceramic Physica Status Solidi - Rapid Research Letters. 1. DOI: 10.1002/Pssr.200600016 |
0.496 |
|
2007 |
Harimkar S, Dahotre NB. Laser assisted densification of surface porosity in structural alumina ceramic Physica Status Solidi (a) Applications and Materials Science. 204: 1105-1113. DOI: 10.1002/Pssa.200622379 |
0.779 |
|
2006 |
Kurella A, Dahotre NB. Laser induced hierarchical calcium phosphate structures. Acta Biomaterialia. 2: 677-83. PMID 16844439 DOI: 10.1016/J.Actbio.2006.05.001 |
0.491 |
|
2006 |
Kurella A, Dahotre NB. Laser induced multi-scale textured zirconia coating on Ti-6Al-4V. Journal of Materials Science. Materials in Medicine. 17: 565-72. PMID 16691356 DOI: 10.1007/S10856-006-8941-3 |
0.484 |
|
2006 |
Singh R, Kurella A, Dahotre NB. Laser surface modification of Ti--6Al--4V: wear and corrosion characterization in simulated biofluid. Journal of Biomaterials Applications. 21: 49-73. PMID 16443617 DOI: 10.1177/0885328206055998 |
0.537 |
|
2006 |
Jackson MJ, Robinson GM, Khangar A, Kenik EA, Dahotre NB. Microgrinding hypereutectoid steels using laser-modified corundum abrasive materials International Journal of Machining and Machinability of Materials. 1: 12-26. DOI: 10.1504/Ijmmm.2006.010663 |
0.498 |
|
2006 |
Khangar A, Dahotre NB, Jackson MJ, Robinson GM. Laser dressing of alumina grinding wheels Journal of Materials Engineering and Performance. 15: 178-181. DOI: 10.1361/105994906X95832 |
0.515 |
|
2006 |
Harimkar SP, Dahotre NB. Effect of laser fluence on surface microstructure of alumina ceramic Advances in Applied Ceramics. 105: 304-308. DOI: 10.1179/174367606X152688 |
0.774 |
|
2006 |
Harimkar SP, Dahotre NB. Evolution of surface morphology in laser-dressed alumina grinding wheel material International Journal of Applied Ceramic Technology. 3: 375-381. DOI: 10.1111/J.1744-7402.2006.02097.X |
0.779 |
|
2006 |
Harimkar SP, Samant AN, Khangar AA, Dahotre NB. Prediction of solidification microstructures during laser dressing of alumina-based grinding wheel material Journal of Physics D: Applied Physics. 39: 1642-1649. DOI: 10.1088/0022-3727/39/8/025 |
0.749 |
|
2006 |
Harimkar SP, Dahotre NB. Crystallographic and morphological textures in laser surface modified alumina ceramic Journal of Applied Physics. 100. DOI: 10.1063/1.2214365 |
0.772 |
|
2006 |
Balani K, Agarwal A, Dahotre NB. Molecular modeling of metastable FeB 49 phase evolution in laser surface engineered coating Journal of Applied Physics. 99. DOI: 10.1063/1.2172704 |
0.722 |
|
2006 |
Manna I, Dutta Majumdar J, Ramesh Chandra B, Nayak S, Dahotre NB. Laser surface cladding of Fe-B-C, Fe-B-Si and Fe-BC-Si-Al-C on plain carbon steel Surface and Coatings Technology. 201: 434-440. DOI: 10.1016/J.Surfcoat.2005.11.138 |
0.542 |
|
2006 |
Tao D, Blue C, Dahotre NB, Honaker R, Parekh BK, Engleman PG, Zhao C, Han H. High-density-infrared (HDI) treatment of mineral processing equipment for enhanced wear resistance Minerals Engineering. 19: 190-196. DOI: 10.1016/J.Mineng.2005.09.038 |
0.415 |
|
2006 |
Singh B, Sheth AC, Dahotre NB. Laser synthesis of palladium-alumina composite membranes for production of high purity hydrogen from gasification Applied Surface Science. 253: 1247-1254. DOI: 10.1016/J.Apsusc.2006.01.079 |
0.403 |
|
2006 |
Kurella A, Dahotre NB. A multi-textured calcium phosphate coating for hard tissue via laser surface engineering Jom. 58: 64-66. DOI: 10.1007/S11837-006-0144-3 |
0.436 |
|
2006 |
Daniel C, Dahotre NB. Phase-modulated hierarchical surface structures by interfering laser beams Advanced Engineering Materials. 8: 925-932. DOI: 10.1002/Adem.200600099 |
0.512 |
|
2006 |
Tao D, Honaker R, Parekh BK, Zhao C, Han H, Blue C, Dahotre NB, Engleman PG. Advanced coating technologies for enhanced wear resistance of coal preparation equipment Impc 2006 - Proceedings of 23rd International Mineral Processing Congress. 1985-1991. |
0.339 |
|
2006 |
Tao D, Honaker R, Parekh BK, Zhao C, Han H, Engleman G, Dahotre NB, Blue C. Advanced surface-enhancement technology for decreasing wear and corrosion of equipment used for mineral processing Minerals and Metallurgical Processing. 23: 27-32. |
0.307 |
|
2005 |
Kurella A, Dahotre NB. Review paper: surface modification for bioimplants: the role of laser surface engineering. Journal of Biomaterials Applications. 20: 5-50. PMID 15972362 DOI: 10.1177/0885328205052974 |
0.432 |
|
2005 |
Singh R, Martin M, Dahotre NB. Influence of laser surface modification on corrosion behavior of stainless steel 316L and Ti-6Al-4V in simulated biofluid Surface Engineering. 21: 297-306. DOI: 10.1179/174329405X55320 |
0.574 |
|
2005 |
Dahotre NB, Nayak S. Nanocoatings for engine application Surface and Coatings Technology. 194: 58-67. DOI: 10.1016/J.Surfcoat.2004.05.006 |
0.402 |
|
2005 |
Singh A, Porter WD, Dahotre NB. Thermal transitions in Fe-Ti-Cr-C quaternary system used as precursor during laser in situ carbide coating Materials Science and Engineering A. 399: 318-325. DOI: 10.1016/J.Msea.2005.04.009 |
0.483 |
|
2005 |
Nayak S, Wang H, Kenik EA, Anderson IM, Dahotre NB. Observation of exothermic reaction during laser-assisted iron oxide coating on aluminum alloy Materials Science and Engineering A. 390: 404-413. DOI: 10.1016/J.Msea.2004.08.008 |
0.475 |
|
2005 |
Khangar A, Dahotre NB. Morphological modification in laser-dressed alumina grinding wheel material for microscale grinding Journal of Materials Processing Technology. 170: 1-10. DOI: 10.1016/J.Jmatprotec.2005.04.087 |
0.563 |
|
2005 |
Khangar AA, Kenik EA, Dahotre NB. Microstructure and microtexture in laser-dressed alumina grinding wheel material Ceramics International. 31: 621-629. DOI: 10.1016/J.Ceramint.2004.08.013 |
0.568 |
|
2005 |
Engleman PG, Kurella A, Samant A, Blue CA, Dahotre NB. The application of laser-induced multi-scale surface texturing Jom. 57: 46-50. DOI: 10.1007/S11837-005-0182-2 |
0.497 |
|
2005 |
Dahotre NB, Seal S. Surface engineering in micro-nanotechnology Jom. 57: 45. DOI: 10.1007/S11837-005-0181-3 |
0.311 |
|
2005 |
Singh A, Dahotre NB. Phase evolution during laser in-situ carbide coating Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 797-803. DOI: 10.1007/S11661-005-0194-0 |
0.52 |
|
2005 |
Singh R, Dahotre NB. Tribology of laser modified surface of stainless steel in physiological solution Journal of Materials Science. 40: 5619-5626. DOI: 10.1007/S10853-005-1449-2 |
0.602 |
|
2005 |
Laha T, Agarwal A, Dahotre NB. The effective elastic modulus of laser-engineered composite boride coating Advanced Engineering Materials. 7: 626-629. DOI: 10.1002/Adem.200500032 |
0.617 |
|
2005 |
Kurella A, Dahotre NB. Multi-scaled textured coatings for bioimplant applications Materials Science and Technology. 1: 93-96. |
0.316 |
|
2005 |
Dahotre NB. Laser process regenerates surface on grinding wheel Advanced Materials and Processes. 163: 24. |
0.434 |
|
2004 |
Nayak S, Riester L, Dahotre NB. Instrumented indentation probing of laser surface-refined cast Al alloy Journal of Materials Research. 19: 202-207. DOI: 10.1557/Jmr.2004.19.1.202 |
0.459 |
|
2004 |
Nayak S, Meyer HM, Dahotre NB. Auger microscopy of laser induced Fe oxide/Al reaction composite coating Surface Engineering. 20: 48-52. DOI: 10.1179/026708404225010621 |
0.459 |
|
2004 |
Nayak S, Wang H, Dahotre NB. Thermography during laser surface melting of cast aluminium alloy Materials Science and Technology. 20: 1609-1614. DOI: 10.1179/026708304X4358 |
0.444 |
|
2004 |
Singh A, Dahotre NB. Laser in-situ synthesis of mixed carbide coating on steel Journal of Materials Science. 39: 4553-4560. DOI: 10.1023/B:Jmsc.0000034149.95969.Bc |
0.551 |
|
2004 |
Kuiry SC, Wannaparhun S, Dahotre NB, Seal S. In-situ formation of Ni-alumina nanocomposite during laser processing Scripta Materialia. 50: 1237-1240. DOI: 10.1016/J.Scriptamat.2004.02.005 |
0.465 |
|
2004 |
Dahotre NB, Seal S. Nanomaterials and surfaces: Processing, characterization, and applications Jom. 56: 35. DOI: 10.1007/S11837-004-0287-Z |
0.34 |
|
2004 |
Nayak S, Dahotre NB. Surface Engineering of Aluminum Alloys for Automotive Engine Applications Jom. 56: 46-48. DOI: 10.1007/S11837-004-0272-6 |
0.458 |
|
2004 |
Seal S, Dahotre NB. Surface Engineering via Nanotechnology: Clusters to Components Jom. 56: 34-35. DOI: 10.1007/S11837-004-0269-1 |
0.317 |
|
2004 |
Kadolkar P, Wang H, Watkins TR, Dahotre NB. Thermographic characterisation of a laser surface engineered ceramic coating on metal International Journal of Advanced Manufacturing Technology. 23: 350-357. DOI: 10.1007/S00170-003-1675-1 |
0.538 |
|
2004 |
Singh A, Dahotre NB. Laser induced in situ synthesis of ultra fine carbide composite coating on steel Mpmd Fifth Global Innovations Proceedings, Surfaces and Interfaces in Nanostructured Materials and Trends in Liga, Miniaturization, and Nanoscale Materials. 137-141. |
0.452 |
|
2003 |
Nayak S, Dahotre NB. Laser - Induced surface modification in A319Al alloy Materials Science Forum. 426: 2443-2448. DOI: 10.4028/Www.Scientific.Net/Msf.426-432.2443 |
0.579 |
|
2003 |
Nayak S, Riester L, Meyer HM, Dahotre NB. Micromechanical properties of a laser-induced iron oxide-aluminum matrix composite coating Journal of Materials Research. 18: 833-839. DOI: 10.1557/Jmr.2003.0114 |
0.473 |
|
2003 |
Nayak S, Meyer HM, Dahotre NB. Auger microscopy of laser induced Fe-oxide/Al reaction composite coating Microscopy and Microanalysis. 9: 690-691. DOI: 10.1017/S1431927603443456 |
0.469 |
|
2003 |
Singh A, Dahotre NB, Nayak S. Carbide composite coating on steel by laser surface engineering Microscopy and Microanalysis. 9: 688-689. DOI: 10.1017/S1431927603443444 |
0.541 |
|
2003 |
Khangar A, Dahotre NB, Nayak S. Microstructure evolution in laser-dressing of alumina grinding wheels Microscopy and Microanalysis. 9: 640-641. DOI: 10.1017/S1431927603443201 |
0.563 |
|
2003 |
Kadolkar P, Dahotre NB. Effect of processing parameters on the cohesive strength of laser surface engineered ceramic coatings on aluminum alloys Materials Science and Engineering A. 342: 183-191. DOI: 10.1016/S0921-5093(02)00286-1 |
0.52 |
|
2003 |
Nayak S, Dahotre NB. Instrumented indentation characterization of laser-induced Fe3O4/Al composite coating Advanced Engineering Materials. 5: 246-251. DOI: 10.1002/Adem.200300333 |
0.48 |
|
2003 |
Kadolkar PB, Watkins TR, Dahotre NB. Residual stress characterization of particulate-reinforced composite coating using x-ray diffraction technique International Surface Engineering Congress - Proceedings of the 1st Congress. 593-602. |
0.374 |
|
2003 |
Kadolkar PB, Wang H, Watkins TR, Dahotre NB. Thermal measurements during laser surface engineering using infrared thermography International Surface Engineering Congress - Proceedings of the 1st Congress. 229-236. |
0.439 |
|
2003 |
Nayak S, Dahotre NB, Meyers HM, Popoola OO. Microstructural characterization of laser induced iron oxide - Aluminum reaction coating International Surface Engineering Congress - Proceedings of the 1st Congress. 206-211. |
0.351 |
|
2003 |
Dahotre NB, Nayak S, Popoola OO, Reister L. Nanoindentation characterization of laser engineered iron oxide coating on A319Al International Surface Engineering Congress - Proceedings of the 1st Congress. 212-215. |
0.497 |
|
2003 |
Jackson MJ, Robinson GM, Dahotre NB, Khangar A, Moss R. Laser dressing of vitrified aluminium oxide grinding wheels British Ceramic Transactions. 102: 237-245. |
0.418 |
|
2002 |
Muralidharan G, Engleman PG, Blue CA, Sikka VK, Singh AK, Khangar A, Dahotre NB. Laser-assisted surface modification of 4340 steel with iron-aluminum alloys Materials Research Society Symposium - Proceedings. 750: 449-454. DOI: 10.1557/Proc-750-Y5.34 |
0.502 |
|
2002 |
Staia MH, Sanchez C, Cruz MR, Roman A, Lesage J, Mesmacque G, Dahotre NB. Tungsten laser alloying of A356 Al alloy - Tribological performance and characterisation Surface Engineering. 18: 270-276. DOI: 10.1179/026708401225005368 |
0.583 |
|
2002 |
Engleman PG, Dahotre NB, Blue CA, Harper DC, Ott R. High density infrared processing of WC/Ni-11P composite coatings Surface Engineering. 18: 113-119. DOI: 10.1179/026708401225002811 |
0.406 |
|
2002 |
Dasari A, Nayak S, Misra RDK, Popoola OO, Dahotre NB. Surface characteristics and wear performance of laser surface engineered iron oxide coatings on cast aluminium alloy Materials Science and Technology. 18: 1036-1040. DOI: 10.1179/026708302225004892 |
0.509 |
|
2002 |
Shah S, Dahotre NB. Microstructural and tribological characterization of laser surface engineered VC coating on tool/die steel Materials and Manufacturing Processes. 17: 1-12. DOI: 10.1081/Amp-120002792 |
0.504 |
|
2002 |
Shah SV, Dahotre NB. Laser surface-engineered vanadium carbide coating for extended die life Journal of Materials Processing Technology. 124: 105-112. DOI: 10.1016/S0924-0136(02)00109-7 |
0.489 |
|
2002 |
Kadolkar P, Dahotre NB. Variation of structure with input energy during laser surface engineering of ceramic coatings on aluminum alloys Applied Surface Science. 199: 222-233. DOI: 10.1016/S0169-4332(02)00799-7 |
0.599 |
|
2002 |
Nayak S, Dahotre NB. The laser-induced combustion synthesis of iron-oxide nanocomposite coatings on aluminum Jom. 54: 39-41. DOI: 10.1007/Bf02709092 |
0.56 |
|
2002 |
Seal S, Dahotre NB. Nanostructured materials and the role of surface engineering Jom. 54: 20-21. DOI: 10.1007/Bf02709086 |
0.311 |
|
2002 |
Dahotre NB. Laser surface engineering Advanced Materials and Processes. 160: 35-39. |
0.37 |
|
2001 |
Agarwal A, Dahotre NB, Riester L, Sudarshan TS. Elastic modulus of pulse electrode surface deposited composite boride coating using nanoindentation Surface Engineering. 17: 495-497. DOI: 10.1179/026708401322911428 |
0.609 |
|
2001 |
Agarwal A, Dahotre NB. Mechanical characterisation of interface in laser surface engineered composite TiB2 coating on steel Surface Engineering. 17: 66-70. DOI: 10.1179/026708401101517629 |
0.363 |
|
2001 |
Katipelli LR, Dahotre NB. Mechanism of high temperature oxidation of laser surface engineered TiC/Al alloy 'composite' coating on 6061 aluminium alloy Materials Science and Technology. 17: 1061-1068. DOI: 10.1179/026708301101511185 |
0.446 |
|
2001 |
Staia MH, Cruz M, Dahotre NB. Wear resistance of a laser alloyed A-356 aluminum/WC composite Wear. 250: 1459-1468. DOI: 10.1016/S0043-1648(01)00789-X |
0.561 |
|
2001 |
Dahotre NB, Nayak S, Popoola OO. The laser-assisted iron oxide coating of cast Al auto engines Jom. 53: 44-46. DOI: 10.1007/S11837-001-0070-3 |
0.465 |
|
2001 |
Dahotre NB, Shah S. High Temperature Oxidation of Laser Surface Engineered VC Coating on H13 Die-Casting Die Steel Advanced Engineering Materials. 3: 675. DOI: 10.1002/1527-2648(200109)3:9<675::Aid-Adem675>3.0.Co;2-0 |
0.413 |
|
2001 |
Agarwal A, Dahotre NB. Deformation behavior of laser surface engineered titanium boride coating under uniaxial tensile stress Journal of Advanced Materials. 33: 37-41. |
0.388 |
|
2000 |
Agarwal A, Dahotre NB. In-situ synthesis of intermetallic and ceramic coating using pulse electrode surfacing Scripta Materialia. 42: 493-498. DOI: 10.1016/S1359-6462(99)00380-2 |
0.585 |
|
2000 |
Katipelli LR, Agarwal A, Dahotre NB. Interfacial strength of laser surface engineered TiC coating on 6061 Al using four-point bend test Materials Science and Engineering A. 289: 34-40. DOI: 10.1016/S0921-5093(00)00920-5 |
0.649 |
|
2000 |
Katipelli LR, Agarwal A, Dahotre NB. Laser surface engineered TiC coating on 6061 Al alloy: microstructure and wear Applied Surface Science. 153: 65-78. DOI: 10.1016/S0169-4332(99)00368-2 |
0.675 |
|
2000 |
Godavarty A, Agarwal A, Dahotre NB. Neural networks in studies on oxidation behavior of laser surface engineered composite boride coatings Applied Surface Science. 161: 131-138. DOI: 10.1016/S0169-4332(00)00279-8 |
0.558 |
|
2000 |
Okutomi M, Nomura H, Tsukamoto T, Dahotre N, Shen H. Surface modification and characterization of functional oxide ceramics using CO2 laser Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions With Materials and Atoms. 169: 6-11. DOI: 10.1016/S0168-583X(00)00008-2 |
0.516 |
|
2000 |
Agarwal A, Dahotre NB. Comparative wear in titanium diboride coatings on steel using high energy density processes Wear. 240: 144-151. DOI: 10.1016/S0043-1648(00)00357-4 |
0.625 |
|
2000 |
Staia MH, Cruz M, Dahotre NB. Microstructural and tribological characterization of an A-356 aluminum alloy superficially modified by laser alloying Thin Solid Films. 377: 665-674. DOI: 10.1016/S0040-6090(00)01448-6 |
0.605 |
|
2000 |
Agarwal A, Katipelli LR, Dahotre NB. Elevated temperature oxidation of laser surface engineered composite boride coating on steel Metallurgical and Materials Transactions A. 31: 461-473. DOI: 10.1007/S11661-000-0282-0 |
0.572 |
|
2000 |
Agarwal A, Dahotre NB. Mechanical properties of laser-deposited composite boride coating using nanoindentation Metallurgical and Materials Transactions A. 31: 401-408. DOI: 10.1007/S11661-000-0277-X |
0.653 |
|
2000 |
Gadkari A, Khanna AS, Dahotre NB. Wear Resistance of Laser Alloyed ZrB 2 Coatings on Mild Steel Proceedings of the International Thermal Spray Conference. 999-1004. |
0.432 |
|
2000 |
McCay MH, Kennedy N, Hopkins JA, Dahotre NB. Wear enhancement of aluminum by laser surface alloying with silicon Lasers in Engineering. 10: 107-122. |
0.498 |
|
2000 |
Okutomi M, Nomura H, Tsukamoto T, Dahotre NB, Shen H. Surface modification and characterization of functional oxide ceramics using CO2 laser Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions With Materials and Atoms. 169: 6-11. |
0.427 |
|
1999 |
Kouta H, Kondo Y, Akagawa K, Hirao K, Sato T, Nakjima S, Toyoda K, Hashidume T, Minami Y, Makino K, Morimoto J, Masagaki A, Morirnoto N, Mori T, Hirobe K, ... ... Dahotre N, et al. Repairing of Cr-photo-mask by ultrafast- pulse laser The Review of Laser Engineering. 27: 73-77,80. DOI: 10.2184/Lsj.27.Supplement_73 |
0.347 |
|
1999 |
Agarwal A, Dahotre N. Pulsed Electrode Surfacing of Steel with TiC Coating: Microstructure and Wear Properties Journal of Materials Engineering and Performance. 8: 479-486. DOI: 10.1361/105994999770346800 |
0.626 |
|
1999 |
Agarwal A, Dahotre N, Sudarshan T. Evolution of interface in pulsed electrode deposited titanium diboride on copper and steel Surface Engineering. 15: 27-32. DOI: 10.1179/026708499322911601 |
0.567 |
|
1999 |
Dahotre NB. Laser Welding Materials and Manufacturing Processes. 14: 621-622. DOI: 10.1080/10426919908914853 |
0.399 |
|
1999 |
McCay MH, Dahotre NB, Hopkins JA, McCay TD, Riley MA. Influence of metals and carbides during laser surface modification of low alloy steel Journal of Materials Science. 34: 5789-5802. DOI: 10.1023/A:1004762319012 |
0.548 |
|
1999 |
Agarwal A, Dahotre NB. Synthesis of Boride Coating on Steel using High Energy Density Processes Materials Characterization. 42: 31-44. DOI: 10.1016/S1044-5803(98)00054-0 |
0.67 |
|
1999 |
Ghosh K, McCay MH, Dahotre NB. Formation of a wear resistant surface on Al by laser aided in-situ synthesis of MoSi2 Journal of Materials Processing Technology. 88: 169-179. DOI: 10.1016/S0924-0136(98)00389-6 |
0.494 |
|
1999 |
Agarwal A, Dahotre NB. Laser surface engineering of steel for hard refractory ceramic composite coating International Journal of Refractory Metals and Hard Materials. 17: 283-293. DOI: 10.1016/S0263-4368(98)00063-8 |
0.722 |
|
1999 |
Dahotre NB, Semak V, Xiao C, McCay MH. Non-vacuum laser deposition of buffer layers for coated conductors Thin Solid Films. 340: 77-86. DOI: 10.1016/S0040-6090(98)01346-7 |
0.456 |
|
1999 |
Dahotre NB, Agarwal A. Refractory ceramic-composite coatings via laser surface engineering Jom. 51: 19-21. DOI: 10.1007/S11837-999-0073-Z |
0.687 |
|
1998 |
Hopkins JA, McCay MH, Dahotre N, Martin M. Laser processed aluminum surfaces in automotive applications: Performance requirements for cylinder bores and valve seats Sae Technical Papers. DOI: 10.4271/982106 |
0.404 |
|
1998 |
Hopkins JA, McCay MH, Dahotre N, McCay TD, Schwartz F. Performance of laser processed aluminum alloys for engine bore applications Sae Technical Papers. DOI: 10.4271/980458 |
0.426 |
|
1998 |
Reitz W, Dahotre NB. Diffusion Bonding of Laser Surface Melted Nickel Alloy Material Materials and Manufacturing Processes. 13: 1-14. DOI: 10.1080/10426919808935216 |
0.495 |
|
1998 |
Agarwal A, Dahotre NB. Pulse electrode deposition of superhard boride coatings on ferrous alloy Surface and Coatings Technology. 106: 242-250. DOI: 10.1016/S0257-8972(98)00545-3 |
0.607 |
|
1997 |
Okutomi M, Tsukamoto T, Niki S, Dahotre NB. Evolution of microstructure in BaTiO3thin films recrystallised by laser Surface Engineering. 13: 66-70. DOI: 10.1179/Sur.1997.13.1.66 |
0.422 |
|
1997 |
Kumar A, Chan HL, Dahotre NB. Structural and hardness studies of CN X /TiN composite coatings on Si (100) substrates by laser ablation method Journal of Materials Engineering and Performance. 6: 583-585. DOI: 10.1007/S11665-997-0047-7 |
0.393 |
|
1997 |
Kumar A, Chan H, Ekanayake U, Wierzbicki A, Dahotre NB. Laser ablation synthesis and characterization of nitride coatings Journal of Materials Engineering and Performance. 6: 577-582. DOI: 10.1007/S11665-997-0046-8 |
0.337 |
|
1995 |
Dahotre NB, Xiao C, Boss W, McCay MH, McCay TD. Coating ceramic composites by a laser in-situ reaction technique Jom. 47: 51-53. DOI: 10.1007/Bf03221286 |
0.512 |
|
1994 |
Dahotre NB, McCay TD, McCay MH. Laser Induced Liquid Phase Reaction Synthesis Assisted Joining of Metal Matrix Composites Materials and Manufacturing Processes. 9: 447-466. DOI: 10.1080/10426919408934917 |
0.495 |
|
1994 |
Dahotre NB, McCay MH, McCay TD. Diamond Materials for Electromagnetic Railguns Materials and Manufacturing Processes. 9: 1-36. DOI: 10.1080/10426919408934882 |
0.322 |
|
1993 |
Dahotre N. LASER MATERIAL PROCESSING by W.M. Steen Springer-Verlag, London, England 206 pages, soft cover, 1991. Materials and Manufacturing Processes. 8: 399-400. DOI: 10.1080/10426919308934845 |
0.302 |
|
1993 |
Dahotre NB, McCay MH, McCay TD, Hubbard CR, Porter WD, Cavin OB. Effect of grain structure on phase transformation events in the inconel 718 Scripta Metallurgica Et Materiala. 28: 1359-1364. DOI: 10.1016/0956-716X(93)90482-8 |
0.34 |
|
1992 |
Dahotre NB, McCay MH, McCay TD, Kim MM. Laser transformation of Pb-Sb, Pb-Ca and Pb-Sb-Sn-As alloys Journal of Materials Science. 27: 6426-6436. DOI: 10.1007/Bf00576294 |
0.513 |
|
1991 |
McCay MH, McCay TD, Sharp CM, Dahotre NB. Laser Welding Techniques for Alloy 718 Superalloys. 719-734. DOI: 10.7449/1991/Superalloys_1991_719_734 |
0.501 |
|
1991 |
Mccay MH, Mccay TD, Dahotre NB, Sharp CM. Fusion Zone Structures in Laser Welded Al SiC Composites Journal of Laser Applications. 3: 35-39. DOI: 10.2351/1.4745286 |
0.496 |
|
1991 |
Dahotre NB, Allard LF, McCay MH, Dwayne McCay T, Gopinathan S. Pulse laser processing of a SiC/Al-alloy metal matrix composite Journal of Materials Research. 6: 514-529. DOI: 10.1557/Jmr.1991.0514 |
0.543 |
|
1990 |
Dahotre NB, McCay TD, McCay MH. Laser surface modification of zinc-base composites Jom. 42: 44-47. DOI: 10.1007/Bf03220977 |
0.58 |
|
1990 |
Dahotre NB, Mukherjee K. Development of microstructure in laser surface alloying of steel with chromium Journal of Materials Science. 25: 445-454. DOI: 10.1007/Bf00714054 |
0.578 |
|
1989 |
McCay MH, McCay TD, Dahotre NB, Sharp CM, Sedghinasab A, Gopinathan S. Effect of pulse duty cycle on Inconel 718 laser welds Sae Technical Papers. DOI: 10.4271/892299 |
0.322 |
|
1989 |
Dahotre NB, McCay TD, McCay MH. Laser processing of a SiC/Al-alloy metal matrix composite Journal of Applied Physics. 65: 5072-5077. DOI: 10.1063/1.343183 |
0.487 |
|
1987 |
Mukherjee K, Dahotre NB, Wakade C. Shear band formation and cracking of a metallic glass irradiated with high energy laser pulses Journal of Materials Science. 22: 601-606. DOI: 10.1007/Bf01160775 |
0.377 |
|
1987 |
Dahotre NB, Hunter A, Mukherjee K. Laser surface melting of W2 tool steel: Effects of prior heat treatment Journal of Materials Science. 22: 403-406. DOI: 10.1007/Bf01160745 |
0.532 |
|
1984 |
Wakade C, Dahotre NB, Mukherjee K. Damage in aluminum, zinc and tin from a nanosecond electric pulse discharge Materials Science and Engineering. 64: 247-254. DOI: 10.1016/0025-5416(84)90108-3 |
0.356 |
|
Show low-probability matches. |