Year |
Citation |
Score |
2017 |
Lisjak A, Kaifosh P, He L, Tatone BSA, Mahabadi OK, Grasselli G. A 2D, fully-coupled, hydro-mechanical, FDEM formulation for modelling fracturing processes in discontinuous, porous rock masses Computers and Geotechnics. 81: 1-18. DOI: 10.1016/j.compgeo.2016.07.009 |
1 |
|
2015 |
Grasselli G, Lisjak A, Mahabadi OK, Tatone BSA. Influence of pre-existing discontinuities and bedding planes on hydraulic fracturing initiation European Journal of Environmental and Civil Engineering. 19: 580-597. DOI: 10.1080/19648189.2014.906367 |
1 |
|
2015 |
Tatone BSA, Grasselli G. A calibration procedure for two-dimensional laboratory-scale hybrid finite-discrete element simulations International Journal of Rock Mechanics and Mining Sciences. 75: 56-72. DOI: 10.1016/j.ijrmms.2015.01.011 |
1 |
|
2015 |
Lisjak A, Tatone BSA, Mahabadi OK, Grasselli G, Marschall P, Lanyon GW, Vaissière RDL, Shao H, Leung H, Nussbaum C. Hybrid Finite-Discrete Element Simulation of the EDZ Formation and Mechanical Sealing Process Around a Microtunnel in Opalinus Clay Rock Mechanics and Rock Engineering. DOI: 10.1007/s00603-015-0847-2 |
1 |
|
2014 |
Tatone BSA, Grasselli G. Characterization of the effect of normal load on the discontinuity morphology in direct shear specimens using X-ray micro-CT Acta Geotechnica. 10: 31-54. DOI: 10.1007/s11440-014-0320-5 |
1 |
|
2014 |
Muralha J, Grasselli G, Tatone B, Blümel M, Chryssanthakis P, Yujing J. ISRM suggested method for laboratory determination of the shear strength of rock joints: Revised version Rock Mechanics and Rock Engineering. 47: 291-302. DOI: 10.1007/s00603-013-0519-z |
1 |
|
2014 |
Lisjak A, Tatone BSA, Grasselli G, Vietor T. Numerical modelling of the anisotropic mechanical behaviour of opalinus clay at the laboratory-scale using FEM/DEM Rock Mechanics and Rock Engineering. 47: 187-206. DOI: 10.1007/s00603-012-0354-7 |
1 |
|
2014 |
Mahabadi OK, Tatone BSA, Grasselli G. Influence of microscale heterogeneity and microstructure on the tensile behavior of crystalline rocks Journal of Geophysical Research: Solid Earth. 119: 5324-5341. DOI: 10.1002/2014JB011064 |
1 |
|
2013 |
Tatone BSA, Grasselli G. An investigation of discontinuity roughness scale dependency using high-resolution surface measurements Rock Mechanics and Rock Engineering. 46: 657-681. DOI: 10.1007/s00603-012-0294-2 |
1 |
|
2012 |
Tatone BSA, Grasselli G. Quantitative measurements of fracture aperture and directional roughness from rock cores Rock Mechanics and Rock Engineering. 45: 619-629. DOI: 10.1007/s00603-011-0219-5 |
1 |
|
2010 |
Tatone BSA, Grasselli G. A new 2D discontinuity roughness parameter and its correlation with JRC International Journal of Rock Mechanics and Mining Sciences. 47: 1391-1400. DOI: 10.1016/j.ijrmms.2010.06.006 |
1 |
|
2010 |
Tatone BSA, Grasselli G. ROCKTOPPLE: A spreadsheet-based program for probabilistic block-toppling analysis Computers and Geosciences. 36: 98-114. DOI: 10.1016/j.cageo.2009.04.014 |
1 |
|
2010 |
Tatone BSA, Grasselli G, Cottrell B. Accounting for the influence of measurement resolution on discontinuity roughness estimates Rock Mechanics in Civil and Environmental Engineering - Proceedings of the European Rock Mechanics Symposium, Eurock 2010. 203-206. |
1 |
|
2009 |
Tatone BS, Grasselli G. A method to evaluate the three-dimensional roughness of fracture surfaces in brittle geomaterials. The Review of Scientific Instruments. 80: 125110. PMID 20059173 DOI: 10.1063/1.3266964 |
1 |
|
2009 |
Tatone BSA, Grasselli G. A method to evaluate the three-dimensional roughness of fracture surfaces in brittle geomaterials Review of Scientific Instruments. 80. DOI: 10.1063/1.3266964 |
1 |
|
2009 |
Nasseri MHB, Tatone BSA, Grasselli G, Young RP. Fracture toughness and fracture roughness interrelationship in thermally treated westerly granite Pure and Applied Geophysics. 166: 801-822. DOI: 10.1007/s00024-009-0476-3 |
1 |
|
Show low-probability matches. |