Year |
Citation |
Score |
2022 |
Zhu S, Zhao M, Mao J, Liang SY. A Ti-6Al-4V Milling Force Prediction Model Based on the Taylor Factor Model and Microstructure Evolution of the Milling Surface. Micromachines. 13. PMID 36295971 DOI: 10.3390/mi13101618 |
0.323 |
|
2021 |
Chen Z, Yue C, Liu X, Liang SY, Wei X, Du Y. Surface Topography Prediction Model in Milling of Thin-Walled Parts Considering Machining Deformation. Materials (Basel, Switzerland). 14. PMID 34947274 DOI: 10.3390/ma14247679 |
0.366 |
|
2020 |
Feng Y, Hsu FC, Lu YT, Lin YF, Lin CT, Lin CF, Lu YC, Liang SY. Temperature prediction of ultrasonic vibration-assisted milling. Ultrasonics. 108: 106212. PMID 32590260 DOI: 10.1016/J.Ultras.2020.106212 |
0.449 |
|
2020 |
Ning J, Wang W, Ning X, Sievers DE, Garmestani H, Liang SY. Analytical Thermal Modeling of Powder Bed Metal Additive Manufacturing Considering Powder Size Variation and Packing. Materials (Basel, Switzerland). 13. PMID 32344571 DOI: 10.3390/Ma13081988 |
0.599 |
|
2020 |
Zhao Z, Liu X, Yue C, Li R, Zhang H, Liang S. Tool Quality Life during Ball End Milling of Titanium Alloy Based on Tool Wear and Surface Roughness Models Applied Sciences. 10: 3316. DOI: 10.3390/App10093316 |
0.421 |
|
2020 |
Feng Y, Hsu F, Lu Y, Lin Y, Lin C, Lin C, Lu Y, Lu X, Liang SY. Surface roughness prediction in ultrasonic vibration-assisted milling Journal of Advanced Mechanical Design Systems and Manufacturing. 14. DOI: 10.1299/Jamdsm.2020Jamdsm0063 |
0.328 |
|
2020 |
Wu C, Dong W, Zhu L, Zhang J, Xu L, Liang SY. Modeling of grinding chip thickness distribution based on material removel mode in grinding of SiC ceramics Journal of Advanced Mechanical Design Systems and Manufacturing. 14. DOI: 10.1299/Jamdsm.2020Jamdsm0018 |
0.315 |
|
2020 |
Li Q, Zuo MJ, Liang SY. Prognosis of Bearing Degeneration Using Adaptive Quaternion Least Mean Biquadrate Under Framework of Hypercomplex Data Ieee Sensors Journal. 20: 2659-2670. DOI: 10.1109/Jsen.2019.2954054 |
0.343 |
|
2020 |
Feng Y, Hsu F, Lu Y, Lin Y, Lin C, Lin C, Lu Y, Liang SY. Force prediction in ultrasonic vibration-assisted milling Machining Science and Technology. DOI: 10.1080/10910344.2020.1815048 |
0.37 |
|
2020 |
Feng Y, Hsu F, Lu Y, Lin Y, Lin C, Lin C, Lu Y, Liang SY. Tool wear rate prediction in ultrasonic vibration-assisted milling Machining Science and Technology. 1-23. DOI: 10.1080/10910344.2020.1752240 |
0.356 |
|
2020 |
Ji X, Mirkoohi E, Ning J, Liang SY. Analytical modeling of post-printing grain size in metal additive manufacturing Optics and Lasers in Engineering. 124: 105805. DOI: 10.1016/J.Optlaseng.2019.105805 |
0.418 |
|
2020 |
Ding Z, Sun G, Guo M, Jiang X, Li B, Liang SY. Effect of phase transition on micro-grinding-induced residual stress Journal of Materials Processing Technology. 281: 116647. DOI: 10.1016/J.Jmatprotec.2020.116647 |
0.348 |
|
2020 |
Mirkoohi E, Dobbs JR, Liang SY. Analytical mechanics modeling of in-process thermal stress distribution in metal additive manufacturing Journal of Manufacturing Processes. 58: 41-54. DOI: 10.1016/J.Jmapro.2020.08.009 |
0.415 |
|
2020 |
Ning J, Sievers DE, Garmestani H, Liang SY. Analytical modeling of in-situ deformation of part and substrate in laser cladding additive manufacturing of Inconel 625 Journal of Manufacturing Processes. 49: 135-140. DOI: 10.1016/J.Jmapro.2019.11.013 |
0.601 |
|
2020 |
Ning J, Sievers DE, Garmestani H, Liang SY. Analytical Modeling of Part Porosity in Metal Additive Manufacturing International Journal of Mechanical Sciences. 172: 105428. DOI: 10.1016/J.Ijmecsci.2020.105428 |
0.621 |
|
2020 |
Li F, Li X, Wang T, Rong Y, Liang SY. In-process residual stresses regulation during grinding through induction heating with magnetic flux concentrator International Journal of Mechanical Sciences. 172: 105393. DOI: 10.1016/J.Ijmecsci.2019.105393 |
0.406 |
|
2020 |
Mirkoohi E, Sievers DE, Garmestani H, Liang SY. Thermo-mechanical modeling of thermal stress in metal additive manufacturing considering elastoplastic hardening Cirp Journal of Manufacturing Science and Technology. 28: 52-67. DOI: 10.1016/J.Cirpj.2020.01.002 |
0.591 |
|
2020 |
Ning J, Sievers DE, Garmestani H, Liang SY. Analytical modeling of in-process temperature in powder feed metal additive manufacturing considering heat transfer boundary condition International Journal of Precision Engineering and Manufacturing-Green Technology. 7: 585-593. DOI: 10.1007/S40684-019-00164-8 |
0.581 |
|
2020 |
Ding Z, Sun G, Jiang X, Liang SY. Cubic boron nitride wheel topography effects on phase transformation of maraging C250 steel and grinding surface quality The International Journal of Advanced Manufacturing Technology. 108: 2881-2893. DOI: 10.1007/S00170-020-05586-2 |
0.342 |
|
2020 |
Mahdavi M, Mirkoohi E, Hoar E, Liang S, Garmestani H. Prediction of the deformation behavior of a selective laser-melted Ti-6Al-4V alloy as a function of process parameters The International Journal of Advanced Manufacturing Technology. 107: 4069-4076. DOI: 10.1007/S00170-020-05330-W |
0.541 |
|
2020 |
Mirkoohi E, Tran HC, Lo YL, Chang YC, Lin HY, Liang SY. Analytical mechanics modeling of residual stress in laser powder bed considering flow hardening and softening The International Journal of Advanced Manufacturing Technology. 107: 4159-4172. DOI: 10.1007/S00170-020-05304-Y |
0.311 |
|
2020 |
Chen Z, Yue C, Liang SY, Liu X, Li H, Li X. Iterative from error prediction for side-milling of thin-walled parts The International Journal of Advanced Manufacturing Technology. 107: 4173-4189. DOI: 10.1007/S00170-020-05266-1 |
0.459 |
|
2020 |
Ning J, Praniewicz M, Wang W, Dobbs JR, Liang SY. Analytical modeling of part distortion in metal additive manufacturing The International Journal of Advanced Manufacturing Technology. 107: 49-57. DOI: 10.1007/S00170-020-05065-8 |
0.41 |
|
2020 |
Mirkoohi E, Dobbs JR, Liang SY. Analytical modeling of residual stress in direct metal deposition considering scan strategy The International Journal of Advanced Manufacturing Technology. 106: 4105-4121. DOI: 10.1007/S00170-019-04919-0 |
0.397 |
|
2020 |
Lu Y, Xie R, Liang SY. CEEMD-assisted kernel support vector machines for bearing diagnosis The International Journal of Advanced Manufacturing Technology. 106: 3063-3070. DOI: 10.1007/S00170-019-04858-W |
0.389 |
|
2020 |
Feng Y, Hung T, Lu Y, Lin Y, Hsu F, Lin C, Lu Y, Liang SY. Inverse Analysis of the Residual Stress in Laser–Assisted Milling The International Journal of Advanced Manufacturing Technology. 106: 2463-2475. DOI: 10.1007/S00170-019-04794-9 |
0.368 |
|
2020 |
Zhao Z, Liu X, Yue C, Zhang H, Li R, Liang SY. Time-varying analytical model of ball-end milling tool wear in surface milling The International Journal of Advanced Manufacturing Technology. 108: 1109-1123. DOI: 10.1007/S00170-019-04783-Y |
0.419 |
|
2019 |
Ning J, Sievers DE, Garmestani H, Liang SY. Analytical Thermal Modeling of Metal Additive Manufacturing by Heat Sink Solution. Materials (Basel, Switzerland). 12. PMID 31408951 DOI: 10.3390/Ma12162568 |
0.573 |
|
2019 |
Mirkoohi E, Seivers DE, Garmestani H, Liang SY. Heat Source Modeling in Selective Laser Melting. Materials (Basel, Switzerland). 12. PMID 31247957 DOI: 10.3390/Ma12132052 |
0.581 |
|
2019 |
Lu Y, Xie R, Liang SY. Bearing fault diagnosis with nonlinear adaptive dictionary learning. The International Journal, Advanced Manufacturing Technology. 102: 4227-4239. PMID 31217654 DOI: 10.1007/S00170-019-03455-1 |
0.314 |
|
2019 |
Ning J, Sievers DE, Garmestani H, Liang SY. Analytical Modeling of In-Process Temperature in Powder Bed Additive Manufacturing Considering Laser Power Absorption, Latent Heat, Scanning Strategy, and Powder Packing. Materials (Basel, Switzerland). 12. PMID 30857209 DOI: 10.3390/Ma12050808 |
0.622 |
|
2019 |
Ning J, Liang SY. Predictive Modeling of Machining Temperatures with Force⁻Temperature Correlation Using Cutting Mechanics and Constitutive Relation. Materials (Basel, Switzerland). 12. PMID 30654579 DOI: 10.3390/Ma12020284 |
0.498 |
|
2019 |
Du J, Yue C, Liu X, Liang SY, Wang L, Gao H, Li H. Transient Temperature Field Model of Wear Land on the Flank of End Mills : A Focus on Time-Varying Heat Intensity and Time-Varying Heat Distribution Ratio Applied Sciences. 9: 1698. DOI: 10.3390/App9081698 |
0.349 |
|
2019 |
Li F, Ning J, Liang S. Analytical Modeling of the Temperature Using Uniform Moving Heat Source in Planar Induction Heating Process Applied Sciences. 9: 1445. DOI: 10.3390/App9071445 |
0.328 |
|
2019 |
Lu X, Jia Z, Liu S, Yang K, Feng Y, Liang SY. Chatter Stability of Micro-Milling by Considering the Centrifugal Force and Gyroscopic Effect of the Spindle Journal of Manufacturing Science and Engineering-Transactions of the Asme. 141. DOI: 10.1115/1.4044520 |
0.318 |
|
2019 |
Ding Z, Sun G, Jiang X, Guo M, Liang SY. Predictive Modeling of Microgrinding Force Incorporating Phase Transformation Effects Journal of Manufacturing Science and Engineering-Transactions of the Asme. 141: 1-19. DOI: 10.1115/1.4043839 |
0.337 |
|
2019 |
Lu X, Wang F, Xue L, Feng Y, Liang SY. Investigation of material removal rate and surface roughness using multi-objective optimization for micro-milling of inconel 718 Industrial Lubrication and Tribology. 71: 787-794. DOI: 10.1108/Ilt-07-2018-0259 |
0.365 |
|
2019 |
Feng Y, Hung T, Lu Y, Lin Y, Hsu F, Lin C, Lu Y, Lu X, Liang SY. Surface roughness modeling in Laser-assisted End Milling of Inconel 718 Machining Science and Technology. 23: 650-668. DOI: 10.1080/10910344.2019.1575407 |
0.373 |
|
2019 |
Li Q, Ji X, Yang J, Liang SY. Stability analysis for SiC grinding based upon harmonic wavelet and Lipschitz exponent Machining Science and Technology. 23: 669-687. DOI: 10.1080/10910344.2019.1575398 |
0.365 |
|
2019 |
Mahdavi M, Hoar E, Sievers DE, Chong Y, Tsuji N, Liang S, Garmestani H. Statistical representation of the microstructure and strength for a two-phase Ti–6Al–4V Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 759: 313-319. DOI: 10.1016/J.Msea.2019.05.048 |
0.551 |
|
2019 |
Lu X, Jia Z, Wang X, Liu Y, Liu M, Feng Y, Liang SY. Measurement and prediction of vibration displacement in micro-milling of nickel-based superalloy Measurement. 145: 254-263. DOI: 10.1016/J.Measurement.2019.05.089 |
0.381 |
|
2019 |
Lu X, Jia Z, Wang H, Feng Y, Liang SY. The effect of cutting parameters on micro-hardness and the prediction of Vickers hardness based on a response surface methodology for micro-milling Inconel 718 Measurement. 140: 56-62. DOI: 10.1016/J.Measurement.2019.03.037 |
0.433 |
|
2019 |
Mirkoohi E, Sievers DE, Garmestani H, Chiang K, Liang SY. Three-dimensional semi-elliptical modeling of melt pool geometry considering hatch spacing and time spacing in metal additive manufacturing Journal of Manufacturing Processes. 45: 532-543. DOI: 10.1016/J.Jmapro.2019.07.028 |
0.611 |
|
2019 |
Ning J, Mirkoohi E, Dong Y, Sievers DE, Garmestani H, Liang SY. Analytical modeling of 3D temperature distribution in selective laser melting of Ti-6Al-4V considering part boundary conditions Journal of Manufacturing Processes. 44: 319-326. DOI: 10.1016/J.Jmapro.2019.06.013 |
0.586 |
|
2019 |
Feng Y, Hung T, Lu Y, Lin Y, Hsu F, Lin C, Lu Y, Liang SY. Flank tool wear prediction of laser-assisted milling Journal of Manufacturing Processes. 43: 292-299. DOI: 10.1016/J.Jmapro.2019.05.008 |
0.432 |
|
2019 |
Mirkoohi E, Bocchini P, Liang SY. Inverse analysis of residual stress in orthogonal cutting Journal of Manufacturing Processes. 38: 462-471. DOI: 10.1016/J.Jmapro.2019.01.033 |
0.404 |
|
2019 |
Yue C, Gao H, Liu X, Liang SY, Wang L. A review of chatter vibration research in milling Chinese Journal of Aeronautics. 32: 215-242. DOI: 10.1016/J.Cja.2018.11.007 |
0.383 |
|
2019 |
Zhao M, Ji X, Liang SY. Micro-grinding Temperature Prediction Considering the Effects of Crystallographic Orientation and the Strain Induced by Phase Transformation International Journal of Precision Engineering and Manufacturing. 20: 1861-1876. DOI: 10.1007/S12541-019-00180-3 |
0.467 |
|
2019 |
Lu X, Xue L, Ruan F, Yang K, Liang SY. Prediction model of the surface roughness of micro-milling single crystal copper Journal of Mechanical Science and Technology. 33: 5369-5374. DOI: 10.1007/S12206-019-1030-6 |
0.302 |
|
2019 |
Li F, Ning J, Wang T, Liang SY. Analytical modeling and sensitivity analysis of the temperature distribution in the planar scanning induction heating based on 2D moving heat source Journal of Mechanical Science and Technology. 33: 5093-5102. DOI: 10.1007/S12206-019-0948-Z |
0.379 |
|
2019 |
Ning J, Wang W, Zamorano B, Liang SY. Analytical modeling of lack-of-fusion porosity in metal additive manufacturing Applied Physics A. 125: 1-11. DOI: 10.1007/S00339-019-3092-9 |
0.385 |
|
2019 |
Ning J, Sievers DE, Garmestani H, Liang SY. Correction to: Analytical modeling of transient temperature in powder feed metal additive manufacturing during heating and cooling stages Applied Physics A. 125: 1-1. DOI: 10.1007/S00339-019-3015-9 |
0.563 |
|
2019 |
Ning J, Sievers DE, Garmestani H, Liang SY. Analytical modeling of transient temperature in powder feed metal additive manufacturing during heating and cooling stages Applied Physics A. 125: 1-11. DOI: 10.1007/S00339-019-2782-7 |
0.59 |
|
2019 |
Feng Y, Hsu F, Lu Y, Lin Y, Lin C, Lin C, Lu Y, Liang SY. Residual stress prediction in ultrasonic vibration–assisted milling The International Journal of Advanced Manufacturing Technology. 104: 2579-2592. DOI: 10.1007/S00170-019-04109-Y |
0.391 |
|
2019 |
Lu Y, Xie R, Liang SY. CEEMD-assisted bearing degradation assessment using tight clustering The International Journal of Advanced Manufacturing Technology. 104: 1259-1267. DOI: 10.1007/S00170-019-04078-2 |
0.302 |
|
2019 |
Zhao M, Ji X, Liang SY. Force prediction in micro-grinding maraging steel 3J33b considering the crystallographic orientation and phase transformation The International Journal of Advanced Manufacturing Technology. 103: 2821-2836. DOI: 10.1007/S00170-019-03724-Z |
0.339 |
|
2019 |
Feng Y, Hung T, Lu Y, Lin Y, Hsu F, Lin C, Lu Y, Liang SY. Inverse analysis of the tool life in laser-assisted milling The International Journal of Advanced Manufacturing Technology. 103: 1947-1958. DOI: 10.1007/S00170-019-03695-1 |
0.452 |
|
2019 |
Tabei A, Mirkoohi E, Garmestani H, Liang S. Modeling of texture development in additive manufacturing of Ni-based superalloys The International Journal of Advanced Manufacturing Technology. 103: 1057-1066. DOI: 10.1007/S00170-019-03555-Y |
0.578 |
|
2019 |
Yue C, Chen Z, Liang SY, Gao H, Liu X. Modeling machining errors for thin-walled parts according to chip thickness The International Journal of Advanced Manufacturing Technology. 103: 91-100. DOI: 10.1007/S00170-019-03474-Y |
0.446 |
|
2019 |
Ning J, Liang SY. A comparative study of analytical thermal models to predict the orthogonal cutting temperature of AISI 1045 steel The International Journal of Advanced Manufacturing Technology. 102: 3109-3119. DOI: 10.1007/S00170-019-03415-9 |
0.485 |
|
2019 |
Lu Y, Pan Z, Bocchini P, Garmestani H, Liang S. Grain size sensitive–MTS model for Ti-6Al-4V machining force and residual stress prediction The International Journal of Advanced Manufacturing Technology. 102: 2173-2181. DOI: 10.1007/S00170-019-03309-W |
0.644 |
|
2019 |
Mirkoohi E, Bocchini P, Liang SY. Analytical temperature predictive modeling and non-linear optimization in machining The International Journal of Advanced Manufacturing Technology. 102: 1557-1566. DOI: 10.1007/S00170-019-03296-Y |
0.471 |
|
2019 |
Ning J, Liang SY. Inverse identification of Johnson-Cook material constants based on modified chip formation model and iterative gradient search using temperature and force measurements The International Journal of Advanced Manufacturing Technology. 102: 2865-2876. DOI: 10.1007/S00170-019-03286-0 |
0.405 |
|
2019 |
Feng Y, Hung T, Lu Y, Lin Y, Hsu F, Lin C, Lu Y, Liang SY. Residual stress prediction in laser-assisted milling considering recrystallization effects The International Journal of Advanced Manufacturing Technology. 102: 393-402. DOI: 10.1007/S00170-018-3207-Z |
0.442 |
|
2019 |
Feng Y, Hung T, Lu Y, Lin Y, Hsu F, Lin C, Lu Y, Liang SY. Analytical prediction of temperature in laser-assisted milling with laser preheating and machining effects The International Journal of Advanced Manufacturing Technology. 100: 3185-3195. DOI: 10.1007/S00170-018-2930-9 |
0.434 |
|
2019 |
Ning J, Nguyen V, Liang SY. Analytical modeling of machining forces of ultra-fine-grained titanium The International Journal of Advanced Manufacturing Technology. 101: 627-636. DOI: 10.1007/S00170-018-2889-6 |
0.49 |
|
2019 |
Wu C, Pang J, Li B, Liang SY. High-speed grinding of HIP-SiC ceramics on transformation of microscopic features The International Journal of Advanced Manufacturing Technology. 102: 1913-1921. DOI: 10.1007/S00170-018-03226-4 |
0.399 |
|
2018 |
Liu X, Liu Q, Yue C, Wang L, Liang SY, Ji W, Gao H. Intelligent Machining Technology in Cutting Process Journal of Mechanical Engineering. 54: 45-61. DOI: 10.3901/Jme.2018.16.045 |
0.383 |
|
2018 |
Li Q, Liang SY. Intelligent Prognostics of Degradation Trajectories for Rotating Machinery Based on Asymmetric Penalty Sparse Decomposition Model Symmetry. 10: 214. DOI: 10.3390/Sym10060214 |
0.312 |
|
2018 |
Li Q, Liang SY. Degradation Trend Prediction for Rotating Machinery Using Long-Range Dependence and Particle Filter Approach Algorithms. 11: 89. DOI: 10.3390/A11070089 |
0.346 |
|
2018 |
Zou P, Rajora M, Ma M, Chen H, Wu W, Liang SY. Electrochemical Micro-Machining Process Parameter Optimization Using a Neural Network-Genetic Algorithm Based Approach International Journal of Materials, Mechanics and Manufacturing. 6: 82-87. DOI: 10.18178/Ijmmm.2018.6.2.352 |
0.323 |
|
2018 |
Lu X, Wang H, Jia Z, Feng Y, Liang SY. Effects of cutting parameters on temperature and temperature prediction in micro-milling of Inconel 718 International Journal of Nanomanufacturing. 14: 377. DOI: 10.1504/Ijnm.2018.10016347 |
0.457 |
|
2018 |
Lu X, Jia Z, Wang H, Feng Y, Liang SY. Strain hardening properties and the relationship between strain and hardness of Inconel 718 International Journal of Manufacturing Research. 13: 330-341. DOI: 10.1504/Ijmr.2018.10011152 |
0.326 |
|
2018 |
Lu Y, Li Q, Pan Z, Liang SY. Prognosis of Bearing Degradation Using Gradient Variable Forgetting Factor RLS Combined With Time Series Model Ieee Access. 6: 10986-10995. DOI: 10.1109/Access.2018.2805280 |
0.388 |
|
2018 |
Li Q, Liang SY. Degradation Trend Prognostics for Rolling Bearing Using Improved R/S Statistic Model and Fractional Brownian Motion Approach Ieee Access. 6: 21103-21114. DOI: 10.1109/Access.2017.2779453 |
0.344 |
|
2018 |
Lu X, Wang F, Jia Z, Liang SY. The flank wear prediction in micro-milling Inconel 718 Industrial Lubrication and Tribology. 70: 1374-1380. DOI: 10.1108/Ilt-01-2018-0031 |
0.462 |
|
2018 |
Pan Z, Feng Y, Ji X, Liang SY. Turning induced residual stress prediction of AISI 4130 considering dynamic recrystallization Machining Science and Technology. 22: 507-521. DOI: 10.1080/10910344.2017.1365900 |
0.399 |
|
2018 |
Yue C, Gao H, Liu X, Wang L, Liang SY. Analytical prediction of part dynamics and process damping for machining stability analysis Procedia Cirp. 72: 1463-1468. DOI: 10.1016/J.Procir.2018.03.247 |
0.441 |
|
2018 |
Feng Y, Hung T, Lu Y, Lin Y, Hsu F, Lin C, Lu Y, Lu X, Liang SY. Inverse Analysis of Inconel 718 Laser-Assisted Milling to Achieve Machined Surface Roughness International Journal of Precision Engineering and Manufacturing. 19: 1611-1618. DOI: 10.1007/S12541-018-0188-7 |
0.413 |
|
2018 |
Lu X, Zhang H, Jia Z, Feng Y, Liang SY. Cutting parameters optimization for MRR under the constraints of surface roughness and cutter breakage in micro-milling process Journal of Mechanical Science and Technology. 32: 3379-3388. DOI: 10.1007/S12206-018-0641-7 |
0.409 |
|
2018 |
Ning J, Nguyen V, Huang Y, Hartwig KT, Liang SY. Inverse determination of Johnson–Cook model constants of ultra-fine-grained titanium based on chip formation model and iterative gradient search The International Journal of Advanced Manufacturing Technology. 99: 1131-1140. DOI: 10.1007/S00170-018-2508-6 |
0.466 |
|
2018 |
Mirkoohi E, Bocchini P, Liang SY. An analytical modeling for process parameter planning in the machining of Ti-6Al-4V for force specifications using an inverse analysis The International Journal of Advanced Manufacturing Technology. 98: 2347-2355. DOI: 10.1007/S00170-018-2393-Z |
0.43 |
|
2018 |
Lu X, Jia Z, Yang K, Shao P, Ruan F, Feng Y, Liang SY. Analytical model of work hardening and simulation of the distribution of hardening in micro-milled nickel-based superalloy The International Journal of Advanced Manufacturing Technology. 97: 3915-3923. DOI: 10.1007/S00170-018-2196-2 |
0.427 |
|
2018 |
Ning J, Liang SY. Model-driven determination of Johnson-Cook material constants using temperature and force measurements The International Journal of Advanced Manufacturing Technology. 97: 1053-1060. DOI: 10.1007/S00170-018-2022-X |
0.429 |
|
2018 |
Lu Y, Li Q, Liang SY. Physics-based intelligent prognosis for rolling bearing with fault feature extraction The International Journal of Advanced Manufacturing Technology. 97: 611-620. DOI: 10.1007/S00170-018-1959-0 |
0.372 |
|
2018 |
Ding Z, Jiang X, Guo M, Liang SY. Investigation of the grinding temperature and energy partition during cylindrical grinding The International Journal of Advanced Manufacturing Technology. 97: 1767-1778. DOI: 10.1007/S00170-018-1900-6 |
0.39 |
|
2018 |
Feng Y, Lu Y, Lin Y, Hung T, Hsu F, Lin C, Lu Y, Liang SY. Inverse analysis of the cutting force in laser-assisted milling on Inconel 718 The International Journal of Advanced Manufacturing Technology. 96: 905-914. DOI: 10.1007/S00170-018-1670-1 |
0.43 |
|
2018 |
Feng Y, Pan Z, Liang SY. Temperature prediction in Inconel 718 milling with microstructure evolution The International Journal of Advanced Manufacturing Technology. 95: 4607-4621. DOI: 10.1007/S00170-018-1581-1 |
0.467 |
|
2018 |
Zhang Y, Li B, Yang J, Liang S. Modeling and optimization of alloy steel 20CrMnTi grinding process parameters based on experiment investigation The International Journal of Advanced Manufacturing Technology. 95: 1859-1873. DOI: 10.1007/S00170-017-1335-5 |
0.414 |
|
2018 |
Lu X, Zhang H, Jia Z, Feng Y, Liang SY. Floor surface roughness model considering tool vibration in the process of micro-milling The International Journal of Advanced Manufacturing Technology. 94: 4415-4425. DOI: 10.1007/S00170-017-1123-2 |
0.422 |
|
2018 |
Lu X, Hu X, Jia Z, Liu M, Gao S, Qu C, Liang SY. Model for the prediction of 3D surface topography and surface roughness in micro-milling Inconel 718 The International Journal of Advanced Manufacturing Technology. 94: 2043-2056. DOI: 10.1007/S00170-017-1001-Y |
0.448 |
|
2017 |
Liang SY, Pan ZP. Integration of Process Mechanics and Materials Mechanics for Precision Machining Solid State Phenomena. 261: 9-16. DOI: 10.4028/Www.Scientific.Net/Ssp.261.9 |
0.376 |
|
2017 |
Pan Z, Shih DS, Garmestani H, Rollett AD, Liang SY. MTS model based force prediction for machining of Ti-6Al-4V Journal of Advanced Mechanical Design Systems and Manufacturing. 11. DOI: 10.1299/Jamdsm.2017Jamdsm0033 |
0.599 |
|
2017 |
Davis B, Dabrow D, Newell R, Miller A, Schueller JK, Xiao G, Liang SY, Hartwig KT, Ruzycki NJ, Sohn Y, Huang Y. Chip Morphology and Chip Formation Mechanisms During Machining of ECAE-Processed Titanium Journal of Manufacturing Science and Engineering. 140. DOI: 10.1115/1.4038442 |
0.37 |
|
2017 |
Ji W, Shi J, Liu X, Wang L, Liang SY. A Novel Approach of Tool Wear Evaluation Journal of Manufacturing Science and Engineering-Transactions of the Asme. 139: 91015. DOI: 10.1115/1.4037231 |
0.32 |
|
2017 |
Fergani O, Berto F, Welo T, Liang SY. Analytical modelling of residual stress in additive manufacturing Fatigue & Fracture of Engineering Materials & Structures. 40: 971-978. DOI: 10.1111/Ffe.12560 |
0.448 |
|
2017 |
Pan Z, Liang SY. Material driven machining process modeling Manufacturing Letters. 14: 1-5. DOI: 10.1016/J.Mfglet.2017.06.002 |
0.465 |
|
2017 |
Pan Z, Feng Y, Hung T, Jiang Y, Hsu F, Wu L, Lin C, Lu Y, Liang SY. Heat affected zone in the laser-assisted milling of Inconel 718 Journal of Manufacturing Processes. 30: 141-147. DOI: 10.1016/J.Jmapro.2017.09.021 |
0.352 |
|
2017 |
Wu C, Li B, Liu Y, Liang SY. Surface roughness modeling for grinding of Silicon Carbide ceramics considering co-existence of brittleness and ductility International Journal of Mechanical Sciences. 133: 167-177. DOI: 10.1016/J.Ijmecsci.2017.07.061 |
0.406 |
|
2017 |
Jiang X, Zhang Z, Ding Z, Fergani O, Liang SY. Tool overlap effect on redistributed residual stress and shape distortion produced by the machining of thin-walled aluminum parts The International Journal of Advanced Manufacturing Technology. 93: 2227-2242. DOI: 10.1007/S00170-017-0693-3 |
0.406 |
|
2017 |
Lu X, Jia Z, Lu Y, Feng Y, Liang SY. Predicting the surface hardness of micro-milled nickel-base superalloy Inconel 718 The International Journal of Advanced Manufacturing Technology. 93: 1283-1292. DOI: 10.1007/S00170-017-0512-X |
0.441 |
|
2017 |
Pan Z, Feng Y, Lu Y, Lin Y, Hung T, Hsu F, Liang SY. Force modeling of Inconel 718 laser-assisted end milling under recrystallization effects The International Journal of Advanced Manufacturing Technology. 92: 1-10. DOI: 10.1007/S00170-017-0379-X |
0.458 |
|
2017 |
Fergani O, Yousfi M, Ding Z, Welo T, Liang SY. A physics-based approach to relate grinding process parameters to tribological behavior of ground surfaces The International Journal of Advanced Manufacturing Technology. 91: 4151-4161. DOI: 10.1007/S00170-017-0111-X |
0.389 |
|
2017 |
Lu X, Wang F, Jia Z, Si L, Zhang C, Liang SY. A modified analytical cutting force prediction model under the tool flank wear effect in micro-milling nickel-based superalloy The International Journal of Advanced Manufacturing Technology. 91: 3709-3716. DOI: 10.1007/S00170-017-0001-2 |
0.473 |
|
2017 |
Pan Z, Shih DS, Tabei A, Garmestani H, Liang SY. Modeling of Ti-6Al-4V machining force considering material microstructure evolution The International Journal of Advanced Manufacturing Technology. 91: 1-8. DOI: 10.1007/S00170-016-9964-7 |
0.653 |
|
2017 |
Pan Z, Lu Y, Lin Y, Hung T, Hsu F, Liang SY. Analytical model for force prediction in laser-assisted milling of IN718 The International Journal of Advanced Manufacturing Technology. 90: 2935-2942. DOI: 10.1007/S00170-016-9629-6 |
0.473 |
|
2017 |
Zhao M, Ji X, Li B, Liang SY. Investigation on the influence of material crystallographic orientation on grinding force in the micro-grinding of single-crystal copper with single grit The International Journal of Advanced Manufacturing Technology. 90: 3347-3355. DOI: 10.1007/S00170-016-9605-1 |
0.398 |
|
2016 |
Li Q, Liang SY, Yang J, Li B. Long range dependence prognostics for bearing vibration intensity chaotic time series Entropy. 18. DOI: 10.3390/E18010023 |
0.322 |
|
2016 |
Ji X, Zhang X, Liang SY. Predicting the effects of cutting fluid on machining force, temperature and residual stress using analytical method Journal of Computer Applications in Technology. 53: 135-141. DOI: 10.1504/Ijcat.2016.074451 |
0.454 |
|
2016 |
Wu C, Li B, Pang J, Liang SY. Ductile grinding of Silicon carbide in high speed grinding Journal of Advanced Mechanical Design, Systems and Manufacturing. 10. DOI: 10.1299/Jamdsm.2016Jamdsm0020 |
0.388 |
|
2016 |
Tabei A, Shih DS, Garmestani H, Liang SY. Dynamic recrystallization of Al alloy 7075 in turning Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4032807 |
0.597 |
|
2016 |
Shao Y, Fergani O, Ding Z, Li B, Liang SY. Experimental Investigation of Residual Stress in Minimum Quantity Lubrication Grinding of AISI 1018 Steel Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4029956 |
0.316 |
|
2016 |
Ding Z, Li B, Shao Y, Liang SY. Phase Transition at High Heating Rate and Strain Rate During Maraging Steel C250 Grinding Materials and Manufacturing Processes. 31: 1763-1769. DOI: 10.1080/10426914.2015.1117622 |
0.322 |
|
2016 |
Tabei A, Shih DS, Garmestani H, Liang SY. Micro-Texture Evolution in Aggressive Machining of Al Alloy 7075 Materials and Manufacturing Processes. 31: 1709-1717. DOI: 10.1080/10426914.2015.1090597 |
0.619 |
|
2016 |
Su YF, Chiang KN, Liang SY. Design and Reliability Assessment of Novel 3D-IC Packaging Journal of Mechanics. 1-11. DOI: 10.1017/Jmech.2016.82 |
0.314 |
|
2016 |
Ji X, Li BZ, Liang SY. Analysis of Thermal and Mechanical Effects on Residual Stress in Minimum Quantity Lubrication (MQL) Machining Journal of Mechanics. 1-6. DOI: 10.1017/Jmech.2016.14 |
0.4 |
|
2016 |
Ding Z, Li B, Fergani O, Shao Y, Liang SY. Investigation of Temperature and Energy Partition During Maraging Steel Micro-grinding Procedia Cirp. 56: 284-288. DOI: 10.1016/J.Procir.2016.10.084 |
0.387 |
|
2016 |
Fergani O, Pan Z, Liang SY, Atmani Z, Welo T. Microstructure Texture Prediction in Machining Processes Procedia Cirp. 46: 595-598. DOI: 10.1016/J.Procir.2016.05.012 |
0.465 |
|
2016 |
Wu C, Li B, Liu Y, Pang J, Liang SY. Strain rate-sensitive analysis for grinding damage of brittle materials International Journal of Advanced Manufacturing Technology. 1-9. DOI: 10.1007/S00170-016-9237-5 |
0.339 |
|
2016 |
du Z, Zhang D, Hou H, Liang SY. Peripheral milling force induced error compensation using analytical force model and APDL deformation calculation International Journal of Advanced Manufacturing Technology. 1-13. DOI: 10.1007/S00170-016-9052-Z |
0.409 |
|
2016 |
Yue C, Liu X, Liang SY. A model for predicting chatter stability considering contact characteristic between milling cutter and workpiece International Journal of Advanced Manufacturing Technology. 1-10. DOI: 10.1007/S00170-016-8953-1 |
0.456 |
|
2016 |
Wu C, Li B, Yang J, Liang SY. Prediction of grinding force for brittle materials considering co-existing of ductility and brittleness International Journal of Advanced Manufacturing Technology. 1-9. DOI: 10.1007/S00170-016-8594-4 |
0.373 |
|
2016 |
Pan Z, Liang SY, Garmestani H, Shih DS. Prediction of machining-induced phase transformation and grain growth of Ti-6Al-4 V alloy International Journal of Advanced Manufacturing Technology. 1-8. DOI: 10.1007/S00170-016-8497-4 |
0.616 |
|
2016 |
Guo M, Li B, Ding Z, Liang SY. Empirical modeling of dynamic grinding force based on process analysis International Journal of Advanced Manufacturing Technology. 1-11. DOI: 10.1007/S00170-016-8465-Z |
0.408 |
|
2016 |
Shao Y, Fergani O, Li B, Liang SY. Residual stress modeling in minimum quantity lubrication grinding International Journal of Advanced Manufacturing Technology. 83: 743-751. DOI: 10.1007/S00170-015-7527-Y |
0.401 |
|
2015 |
Wu CJ, Li BZ, Liang SY, Yang JG. Experimental Investigations on Cylindrical Grinding Temperature of Silicon Carbide Advanced Materials Research. 1251-1256. DOI: 10.4028/Www.Scientific.Net/Amr.1120-1121.1251 |
0.361 |
|
2015 |
Zou P, Li BZ, Liang SY. An Improved General Regression Neural Network for Prediction Based on Small Samples Data Applied Mechanics and Materials. 743: 646-651. DOI: 10.4028/Www.Scientific.Net/Amm.743.646 |
0.316 |
|
2015 |
Yang JG, Xu L, Lu ZJ, Xiang Q, Liu B, Liang SY. Textile Processing Anomaly Detection Based on Time Domain Features and GA-SVM Applied Mechanics and Materials. 740: 706-713. DOI: 10.4028/Www.Scientific.Net/Amm.740.706 |
0.321 |
|
2015 |
Ji X, Shih AH, Rajora M, Shao YM, Liang SY. Optimization of Tensile Residual Stress on Machined Surface in MQL Turning Applied Mechanics and Materials. 209-212. DOI: 10.4028/Www.Scientific.Net/Amm.713-715.209 |
0.391 |
|
2015 |
Venkatachalam S, Fergani O, Li X, Yang JG, Chiang K, Liang SY. Microstructure Effects on Cutting Forces and Flow Stress in Ultra-Precision Machining of Polycrystalline Brittle Materials Journal of Manufacturing Science and Engineering-Transactions of the Asme. 137: 21020. DOI: 10.1115/1.4029648 |
0.406 |
|
2015 |
Shao Y, Li B, Liang SY. Predictive modeling of surface roughness in grinding of ceramics Machining Science and Technology. 19: 325-338. DOI: 10.1080/10910344.2015.1018535 |
0.37 |
|
2015 |
Chang HH, Su YF, Liang SY, Chiang KN. The Effect of Mechanical Stress on Electromigration Behavior Journal of Mechanics. 31: 441-448. DOI: 10.1017/Jmech.2015.10 |
0.313 |
|
2015 |
Ding Z, Li B, Liang SY. Phase transformation and residual stress of Maraging C250 steel during grinding Materials Letters. 154: 37-39. DOI: 10.1016/J.Matlet.2015.04.040 |
0.319 |
|
2015 |
Li B, Jiang X, Yang J, Liang SY. Effects of depth of cut on the redistribution of residual stress and distortion during the milling of thin-walled part Journal of Materials Processing Technology. 216: 223-233. DOI: 10.1016/J.Jmatprotec.2014.09.016 |
0.38 |
|
2015 |
Fergani O, Tabei A, Garmestani H, Liang SY. Prediction of polycrystalline materials texture evolution in machining via Viscoplastic Self-Consistent modeling Journal of Manufacturing Processes. 16: 543-550. DOI: 10.1016/J.Jmapro.2014.07.004 |
0.652 |
|
2015 |
Tabei A, Shih DS, Garmestani H, Liang SY. Derivation of Process Path Functions in Machining of Al Alloy 7075 Journal of Materials Engineering and Performance. DOI: 10.1007/S11665-015-1706-8 |
0.617 |
|
2015 |
Fergani O, Jiang X, Shao Y, Welo T, Yang J, Liang S. Prediction of residual stress regeneration in multi-pass milling International Journal of Advanced Manufacturing Technology. DOI: 10.1007/S00170-015-7464-9 |
0.399 |
|
2015 |
Ding Z, Li B, Liang SY. Maraging steel phase transformation in high strain rate grinding International Journal of Advanced Manufacturing Technology. 80: 711-718. DOI: 10.1007/S00170-015-7014-5 |
0.39 |
|
2015 |
Fergani O, Liang SY. The effect of machining process thermo-mechanical loading on workpiece average grain size International Journal of Advanced Manufacturing Technology. 80: 21-29. DOI: 10.1007/S00170-015-6975-8 |
0.423 |
|
2015 |
Shao Y, Li B, Chiang KN, Liang SY. Physics-based analysis of minimum quantity lubrication grinding International Journal of Advanced Manufacturing Technology. 79: 1659-1670. DOI: 10.1007/S00170-015-6941-5 |
0.479 |
|
2015 |
Zhang Y, Zou P, Li B, Liang S. Study on optimized principles of process parameters for environmentally friendly machining austenitic stainless steel with high efficiency and little energy consumption International Journal of Advanced Manufacturing Technology. 79: 89-99. DOI: 10.1007/S00170-014-6763-X |
0.417 |
|
2014 |
Ding ZS, Li BZ, Zou P, Liang SY. Material phase transformation during grinding Advanced Materials Research. 1052: 503-508. DOI: 10.4028/Www.Scientific.Net/Amr.1052.503 |
0.359 |
|
2014 |
Tabei A, Fergani O, Garmestani H, Liang SY. Analysis of micro-texture and grain size distributions in machined aluminum alloy 7075 Advanced Materials Research. 1052: 489-494. DOI: 10.4028/Www.Scientific.Net/Amr.1052.489 |
0.62 |
|
2014 |
Rajora M, Shih AH, Zou P, Li BZ, Liang SY. A hybrid neural network for prediction of surface roughness in machining Applied Mechanics and Materials. 633: 579-582. DOI: 10.4028/Www.Scientific.Net/Amm.633-634.579 |
0.408 |
|
2014 |
Ji X, Shih AH, Rajora M, Shao YM, Liang SY. A hybrid neural network for prediction of surface residual stress in MQL face turning Applied Mechanics and Materials. 633: 574-578. DOI: 10.4028/Www.Scientific.Net/Amm.633-634.574 |
0.398 |
|
2014 |
Shih AH, Liang SY. Magnetic levitation and rotation for feasibility of free-form machining Applied Mechanics and Materials. 496: 1048-1051. DOI: 10.4028/Www.Scientific.Net/Amm.496-500.1048 |
0.41 |
|
2014 |
Fergani O, Mamedov A, Lazoglu I, Yang JG, Liang SY. Prediction of residual stress induced distortions in micro-milling of Al7050 thin plate Applied Mechanics and Materials. 472: 677-681. DOI: 10.4028/Www.Scientific.Net/Amm.472.677 |
0.434 |
|
2014 |
Shao Y, Liang SY. Predictive force modeling in MQL (minimum quantity lubrication) grinding Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 2. DOI: 10.1115/MSEC2014-3971 |
0.312 |
|
2014 |
Ji X, Zhang X, Li B, Liang SY. Modeling the effects of minimum quantity lubrication on machining force, temperature, and residual stress Machining Science and Technology. 18: 547-564. DOI: 10.1080/10910344.2014.955367 |
0.464 |
|
2014 |
Liang SY, Li Y, Billington SA, Zhang C, Shiroishi J, Kurfess TR, Danyluk S. Adaptive prognostics for rotary machineries Procedia Engineering. 86: 852-857. DOI: 10.1016/J.Proeng.2014.11.106 |
0.315 |
|
2014 |
Fergani O, Shao Y, Liang SY. Effect of temperature on the subsurface microstructure and mechanical properties of AA 7075-T6 in machining Procedia Cirp. 13: 181-185. DOI: 10.1016/J.Procir.2014.04.031 |
0.459 |
|
2014 |
Fergani O, Shao Y, Lazoglu I, Liang SY. Temperature effects on grinding residual stress Procedia Cirp. 14: 2-6. DOI: 10.1016/J.Procir.2014.03.100 |
0.393 |
|
2014 |
Ji X, Li B, Zhang X, Liang SY. The effects of minimum quantity lubrication (MQL) on machining force, temperature, and residual stress International Journal of Precision Engineering and Manufacturing. 15: 2443-2451. DOI: 10.1007/S12541-014-0612-6 |
0.428 |
|
2014 |
Fergani O, Lazoglu I, Mkaddem A, El Mansori M, Liang SY. Analytical modeling of residual stress and the induced deflection of a milled thin plate International Journal of Advanced Manufacturing Technology. 75: 455-463. DOI: 10.1007/S00170-014-6146-3 |
0.418 |
|
2014 |
Ji X, Zhang X, Liang SY. Predictive modeling of residual stress in minimum quantity lubrication machining International Journal of Advanced Manufacturing Technology. 70: 2159-2168. DOI: 10.1007/S00170-013-5439-2 |
0.467 |
|
2014 |
Li B, Ni J, Yang J, Liang SY. Study on high-speed grinding mechanisms for quality and process efficiency International Journal of Advanced Manufacturing Technology. 70: 813-819. DOI: 10.1007/S00170-013-5297-Y |
0.365 |
|
2014 |
Fergani O, Tabei A, Garmestani H, Liang SY. Prediction of material microstructural texture evolution in machining via viscoplastic self-consistent modeling Transactions of the North American Manufacturing Research Institution of Sme. 42: 301-308. |
0.381 |
|
2013 |
Hwang J, Jeong EH, Chung ES, Liang SY. Assessment of the cutting tooling effect on turning chatter Applied Mechanics and Materials. 433: 2101-2106. DOI: 10.4028/Www.Scientific.Net/Amm.433-435.2101 |
0.426 |
|
2013 |
Ji X, Zhang XP, Li BZ, Liang SY. Predictive modeling of minimum quantity lubrication: Cutting force, temperature and residual stress Applied Mechanics and Materials. 365: 1181-1184. DOI: 10.4028/Www.Scientific.Net/Amm.365-366.1181 |
0.47 |
|
2013 |
Venkatachalam S, Li X, Fergani O, Yang JG, Liang SY. Crystallographic Effects on Microscale Machining of Polycrystalline Brittle Materials Journal of Micro and Nano-Manufacturing. 1: 41001. DOI: 10.1115/1.4025255 |
0.373 |
|
2013 |
Fergani O, Liang SY. Materials-affected manufacturing Manufacturing Letters. 1: 74-77. DOI: 10.1016/J.Mfglet.2013.10.002 |
0.374 |
|
2013 |
Su JC, Young KA, Srivatsa S, Morehouse JB, Liang SY. Predictive modeling of machining residual stresses considering tool edge effects Production Engineering. 7: 391-400. DOI: 10.1007/S11740-013-0470-6 |
0.469 |
|
2013 |
Damianakis MA, Bement MT, Liang SY. Kinematics prediction and experimental validation of machined surface roughness International Journal of Advanced Manufacturing Technology. 65: 1651-1657. DOI: 10.1007/S00170-012-4286-X |
0.442 |
|
2013 |
Su J, Young KA, Ma K, Srivatsa S, Morehouse JB, Liang SY. Modeling of residual stresses in milling The International Journal of Advanced Manufacturing Technology. 65: 717-733. DOI: 10.1007/S00170-012-4211-3 |
0.42 |
|
2012 |
Ji X, Zhang X, Liang SY. A new approach to predict machining force and temperature with minimum quantity lubrication Asme 2012 International Manufacturing Science and Engineering Conference Collocated With the 40th North American Manufacturing Research Conference and in Participation With the Int. Conf., Msec 2012. 69-76. DOI: 10.1115/MSEC2012-7221 |
0.376 |
|
2012 |
Park HW, Park YB, Liang SY. Non-contact measurement methods for micro- and meso-scale tool positioning International Journal of Advanced Manufacturing Technology. 60: 251-260. DOI: 10.1007/S00170-011-3601-2 |
0.32 |
|
2012 |
Li KM, Liang SY. Flank wear model for near dry turning under built-up edge effect Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'Eng Hsuebo Pao. 33: 123-132. |
0.363 |
|
2011 |
Ji X, Kang Z, Zhang X, Liang SY. A New Methodology to Validate the Cutting Temperature Theoretical Model in Super-Finish Hard Machining Advanced Science Letters. 4: 1561-1565. DOI: 10.1166/Asl.2011.1664 |
0.428 |
|
2011 |
Park HW, Park YB, Liang SY. Multi-procedure design optimization and analysis of mesoscale machine tools The International Journal of Advanced Manufacturing Technology. 56: 1-12. DOI: 10.1007/S00170-011-3160-6 |
0.401 |
|
2010 |
Murtagian GR, Hecker RL, Liang SY, Danyluk S. Plastic deformation depth modeling on grinding of gamma Titanium Aluminides The International Journal of Advanced Manufacturing Technology. 49: 89-95. DOI: 10.1007/S00170-009-2387-Y |
0.334 |
|
2010 |
Li X, Cai M, Rahman M, Liang S. Study of the upper bound of tool edge radius in nanoscale ductile mode cutting of silicon wafer The International Journal of Advanced Manufacturing Technology. 48: 993-999. DOI: 10.1007/S00170-009-2347-6 |
0.366 |
|
2009 |
Venkatachalam S, Li X, Liang SY. Predictive modeling of transition undeformed chip thickness in ductile-regime micro-machining of single crystal brittle materials Journal of Materials Processing Technology. 209: 3306-3319. DOI: 10.1016/J.Jmatprotec.2008.07.036 |
0.41 |
|
2009 |
Park HW, Liang SY. Force modeling of microscale grinding process incorporating thermal effects The International Journal of Advanced Manufacturing Technology. 44: 476-486. DOI: 10.1007/S00170-008-1852-3 |
0.491 |
|
2008 |
Cardi AA, Bement MT, Liang SY. Workpiece dynamics during stable cutting in a turning operation International Journal of Manufacturing Research. 3: 406-424. DOI: 10.1504/Ijmr.2008.020902 |
0.354 |
|
2008 |
Cardi AA, Firpi HA, Bement MT, Liang SY. Workpiece dynamic analysis and prediction during chatter of turning process Mechanical Systems and Signal Processing. 22: 1481-1494. DOI: 10.1016/J.Ymssp.2007.11.026 |
0.41 |
|
2008 |
Park HW, Liang SY. Force modeling of micro-grinding incorporating crystallographic effects International Journal of Machine Tools & Manufacture. 48: 1658-1667. DOI: 10.1016/J.Ijmachtools.2008.07.004 |
0.493 |
|
2007 |
Liang SY, Abraham BM. Predictive Modeling and Optimization of High Performance Machining Applied Mechanics and Materials. 842-849. DOI: 10.4028/Www.Scientific.Net/Amm.10-12.842 |
0.467 |
|
2007 |
Park HW, Liang SY, Chen R. Microgrinding force predictive modelling based on microscale single grain interaction analysis International Journal of Manufacturing Technology and Management. 12: 25-38. DOI: 10.1504/Ijmtm.2007.014141 |
0.419 |
|
2007 |
Zhang JY, Liang SY, Yen D. Optimisation of the finish hard turning process for hardened 52100 steel with PCBN tools International Journal of Manufacturing Research. 2: 428-447. DOI: 10.1504/Ijmr.2007.015087 |
0.44 |
|
2007 |
Zhang JY, Morehouse JB, Liang SY, Yao J, Zhou X. Handling constraints for manufacturing process optimisation using genetic algorithms International Journal of Computer Applications in Technology. 28: 9. DOI: 10.1504/Ijcat.2007.012326 |
0.325 |
|
2007 |
Li K, Liang SY. Predictive modeling of flank wear in turning under flood cooling Journal of Manufacturing Science and Engineering-Transactions of the Asme. 129: 513-519. DOI: 10.1115/1.2714589 |
0.509 |
|
2007 |
Venkatachalam S, Liang SY. Effects of Ploughing Forces and Friction Coefficient in Microscale Machining Journal of Manufacturing Science and Engineering-Transactions of the Asme. 129: 274-280. DOI: 10.1115/1.2673449 |
0.446 |
|
2007 |
Zhang J, Liang SY. Process Optimization of Finish Turning of Hardened Steels Materials and Manufacturing Processes. 22: 107-113. DOI: 10.1080/10426910601016020 |
0.321 |
|
2007 |
Newby G, Venkatachalam S, Liang SY. Empirical analysis of cutting force constants in micro-end-milling operations Journal of Materials Processing Technology. 192: 41-47. DOI: 10.1016/J.Jmatprotec.2007.04.026 |
0.368 |
|
2007 |
Li K, Liang SY. Modeling of cutting forces in near dry machining under tool wear effect International Journal of Machine Tools & Manufacture. 47: 1292-1301. DOI: 10.1016/J.Ijmachtools.2006.08.017 |
0.475 |
|
2007 |
Huang Y, Chou YK, Liang SY. CBN tool wear in hard turning: a survey on research progresses The International Journal of Advanced Manufacturing Technology. 35: 443-453. DOI: 10.1007/S00170-006-0737-6 |
0.414 |
|
2007 |
Li K, Liang SY. Performance profiling of minimum quantity lubrication in machining. The International Journal of Advanced Manufacturing Technology. 35: 226-233. DOI: 10.1007/S00170-006-0713-1 |
0.468 |
|
2007 |
Liu K, Li XP, Liang SY. The mechanism of ductile chip formation in cutting of brittle materials The International Journal of Advanced Manufacturing Technology. 33: 875-884. DOI: 10.1007/S00170-006-0531-5 |
0.376 |
|
2007 |
Hecker RL, Liang SY, Wu XJ, Xia P, Jin DGW. Grinding force and power modeling based on chip thickness analysis The International Journal of Advanced Manufacturing Technology. 33: 449-459. DOI: 10.1007/S00170-006-0473-Y |
0.401 |
|
2006 |
Cox DJ, Newby G, Park HW, Liang SY, Liu W, Hsieh S, Hwang J. Precision Machining with Micro-Scale Vertical Machining Center Journal of Advanced Computational Intelligence and Intelligent Informatics. 10: 187-195. DOI: 10.20965/Jaciii.2006.P0187 |
0.361 |
|
2006 |
Li KM, Liang SY. Cutting fluid aerosol generation in near-dry turning International Journal of Manufacturing Research. 1: 283-299. DOI: 10.1504/Ijmr.2006.011959 |
0.425 |
|
2006 |
Xie Q, Liang SY, Chen R. Modelling of linear motor feed drives for grinding machines International Journal of Manufacturing Research. 1: 41-58. DOI: 10.1504/Ijmr.2006.010703 |
0.397 |
|
2006 |
Li K, Liang SY. Modeling of Cutting Temperature in Near Dry Machining Journal of Manufacturing Science and Engineering-Transactions of the Asme. 128: 416-424. DOI: 10.1115/1.2162907 |
0.433 |
|
2006 |
Zhang JY, Liang SY, Zhang G, Yen D. Modeling of Residual Stress Profile in Finish Hard Turning Materials and Manufacturing Processes. 21: 39-45. DOI: 10.1081/Amp-200060608 |
0.415 |
|
2006 |
Zhang J, Liang SY, Yao J, Chen JM, Huang JL. Evolutionary Optimization of Machining Processes Journal of Intelligent Manufacturing. 17: 203-215. DOI: 10.1007/S10845-005-6637-Z |
0.356 |
|
2005 |
Huang Y, Liang SY. Modeling of Cutting Forces Under Hard Turning Conditions Considering Tool Wear Effect Journal of Manufacturing Science and Engineering-Transactions of the Asme. 127: 262-270. DOI: 10.1115/1.1852571 |
0.429 |
|
2005 |
Huang Y, Liang SY. Cutting Temperature Modeling Based On Non-Uniform Heat Intensity And Partition Ratio Machining Science and Technology. 9: 301-323. DOI: 10.1080/10910340500196421 |
0.391 |
|
2005 |
Liu K, Li X, Liang SY, Liu XD. Nanometer-scale, ductile-mode cutting of soda-lime glass Journal of Manufacturing Processes. 7: 95-101. DOI: 10.1016/S1526-6125(05)70086-4 |
0.392 |
|
2005 |
Huang Y, Liang SY. Effect of Cutting Conditions on Tool Performance in CBN Hard Turning Journal of Manufacturing Processes. 7: 10-16. DOI: 10.1016/S1526-6125(05)70077-3 |
0.431 |
|
2004 |
Kirkland E, Kurfess TR, Liang SY. An Optical Coordinate Measuring Machine for Nanoscale Dimensional Metrology Journal of Advanced Computational Intelligence and Intelligent Informatics. 8: 39-44. DOI: 10.20965/Jaciii.2004.P0039 |
0.302 |
|
2004 |
Su JC, Liang SY, Lin WL, Jan TC. Ceramic micro/nanpparticle size evolution in wet grinding in stirred ball mill Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 779-786. DOI: 10.1115/1.1811117 |
0.335 |
|
2004 |
Liang SY, Hecker RL, Landers RG. Machining Process Monitoring and Control: The State-of-the-Art Journal of Manufacturing Science and Engineering-Transactions of the Asme. 126: 297-310. DOI: 10.1115/1.1707035 |
0.383 |
|
2004 |
Huang Y, Liang SY. Modeling of CBN Tool Flank Wear Progression in Finish Hard Turning Journal of Manufacturing Science and Engineering-Transactions of the Asme. 126: 98-106. DOI: 10.1115/1.1644543 |
0.438 |
|
2004 |
Liu K, Li X, Liang SY. Nanometer-Scale Ductile Cutting of Tungsten Carbide☆ Journal of Manufacturing Processes. 6: 187-195. DOI: 10.1016/S1526-6125(04)70073-0 |
0.412 |
|
2004 |
Liang SY, Kwon YK, Chiou RY. Modelling the effect of flank wear on machining thrust stability The International Journal of Advanced Manufacturing Technology. 23: 857-864. DOI: 10.1007/S00170-003-1756-1 |
0.416 |
|
2004 |
Huang Y, Liang SY. Modelling of CBN tool crater wear in finish hard turning The International Journal of Advanced Manufacturing Technology. 24: 632-639. DOI: 10.1007/S00170-003-1744-5 |
0.466 |
|
2003 |
Hecker RL, Ramoneda IM, Liang SY. Analysis of Wheel Topography and Grit Force for Grinding Process Modeling Journal of Manufacturing Processes. 5: 13-23. DOI: 10.1016/S1526-6125(03)70036-X |
0.385 |
|
2003 |
Hecker RL, Liang SY. Predictive modeling of surface roughness in grinding International Journal of Machine Tools & Manufacture. 43: 755-761. DOI: 10.1016/S0890-6955(03)00055-5 |
0.373 |
|
2003 |
Huang Y, Liang SY. Cutting forces modeling considering the effect of tool thermal property—application to CBN hard turning International Journal of Machine Tools & Manufacture. 43: 307-315. DOI: 10.1016/S0890-6955(02)00185-2 |
0.489 |
|
2003 |
Huang Y, Liang SY. Force modelling in shallow cuts with large negative rake angle and large nose radius tools—application to hard turning The International Journal of Advanced Manufacturing Technology. 22: 626-632. DOI: 10.1007/S00170-003-1550-0 |
0.435 |
|
2002 |
Zhang C, Chuckpaiwong I, Liang SY, Seth BB. Mechanical Component Lifetime Estimation Based On Accelerated Life Testing With Singularity Extrapolation Mechanical Systems and Signal Processing. 16: 705-718. DOI: 10.1006/Mssp.2002.1490 |
0.314 |
|
2001 |
Chen Z, Wong K, Li W, Liang SY, Stephenson DA. Cutting Fluid Aerosol Generation due to Spin-off in Turning Operation: Analysis for Environmentally Conscious Machining Journal of Manufacturing Science and Engineering-Transactions of the Asme. 123: 506-512. DOI: 10.1115/1.1367268 |
0.384 |
|
2001 |
Atmadi A, Stephenson A, Liang SY. Cutting Fluid Aerosol from Splash in Turning: Analysis for Environmentally Conscious Machining The International Journal of Advanced Manufacturing Technology. 17: 238-243. DOI: 10.1007/S001700170175 |
0.396 |
|
2000 |
Lazoglu I, Liang SY. Modeling of Ball-End Milling Forces with Cutter Axis Inclination Journal of Manufacturing Science and Engineering-Transactions of the Asme. 122: 3-11. DOI: 10.1115/1.538885 |
0.454 |
|
2000 |
Chiou RY, Liang SY. Dynamic modeling of cutting acoustic emission via piezo-electric actuator wave control International Journal of Machine Tools & Manufacture. 40: 641-659. DOI: 10.1016/S0890-6955(99)00095-4 |
0.347 |
|
2000 |
Chiou RY, Liang SY. Analysis of acoustic emission in chatter vibration with tool wear effect in turning International Journal of Machine Tools & Manufacture. 40: 927-941. DOI: 10.1016/S0890-6955(99)00093-0 |
0.428 |
|
2000 |
Chen Z, Atmadi A, Stephenson DA, Liang SY, Patri KV. Analysis of Cutting Fluid Aerosol Generation for Environmentally Responsible Machining Cirp Annals. 49: 53-56. DOI: 10.1016/S0007-8506(07)62894-7 |
0.403 |
|
2000 |
Li Y, Liang SY, Petrof RC, Seth BB. Force Modelling for Cylindrical Plunge Cutting The International Journal of Advanced Manufacturing Technology. 16: 863-870. DOI: 10.1007/S001700070003 |
0.415 |
|
2000 |
Li B, Melkote SN, Liang SY. Analysis of reactions and minimum clamping force for machining fixtures with large contact areas International Journal of Advanced Manufacturing Technology. 16: 79-84. DOI: 10.1007/S001700050011 |
0.404 |
|
2000 |
Li Y, Kurfess TR, Liang SY. Stochastic Prognostics For Rolling Element Bearings Mechanical Systems and Signal Processing. 14: 747-762. DOI: 10.1006/Mssp.2000.1301 |
0.337 |
|
1999 |
Chiou RYS, Liang SY. Chatter Frequency in Turning Considering Tool Compliance and Wearland Journal of Manufacturing Science and Engineering-Transactions of the Asme. 121: 307-311. DOI: 10.1115/1.2831221 |
0.337 |
|
1999 |
Medaska MK, Nowag L, Liang SY. Simultaneous Measurement Of The Thermal And Tribological Effects Of Cutting Fluid Machining Science and Technology. 3: 221-237. DOI: 10.1080/10940349908945691 |
0.386 |
|
1999 |
Bell DD, Chou J, Nowag L, Liang SY. Modeling of the Environmental Effect of Cutting Fluid Tribology Transactions. 42: 168-173. DOI: 10.1080/10402009908982204 |
0.334 |
|
1999 |
Hekman KA, Liang SY. Feed rate optimization and depth of cut control for productivity and part parallelism in grinding Mechatronics. 9: 447-462. DOI: 10.1016/S0957-4158(98)00054-3 |
0.381 |
|
1999 |
Yang Y, Kurfess T, Liang S, Danyluk S. Application of a specialized capacitance probe in bearing diagnosis Wear. 1215-1221. DOI: 10.1016/S0043-1648(98)00399-8 |
0.305 |
|
1999 |
Li Y, Liang SY. Cutting Force Analysis in Transient State Milling Processes The International Journal of Advanced Manufacturing Technology. 15: 785-790. DOI: 10.1007/S001700050132 |
0.427 |
|
1999 |
Hekman KA, Liang SY. Compliance feedback control for part parellelism in grinding The International Journal of Advanced Manufacturing Technology. 15: 64-69. DOI: 10.1007/S001700050040 |
0.426 |
|
1999 |
Li Y, Billington S, Zhang C, Kurfess T, Danyluk S, Liang S. Adaptive Prognostics for Rolling Element Bearing Condition Mechanical Systems and Signal Processing. 13: 103-113. DOI: 10.1006/Mssp.1998.0183 |
0.338 |
|
1998 |
Zheng L, Liang SY, Melkote SN. Angle domain analytical model for end milling forces Journal of Manufacturing Science and Engineering, Transactions of the Asme. 120: 252-258. DOI: 10.1115/1.2830121 |
0.446 |
|
1998 |
Liang SY, Zheng L. Analysis of End Milling Surface Error Considering Tool Compliance Journal of Manufacturing Science and Engineering-Transactions of the Asme. 120: 207-210. DOI: 10.1115/1.2830105 |
0.422 |
|
1998 |
Chiou RY, Liang SY. Chatter stability of a slender cutting tool in turning with tool wear effect International Journal of Machine Tools & Manufacture. 38: 315-327. DOI: 10.1016/S0890-6955(97)00079-5 |
0.408 |
|
1998 |
Zheng L, Li Y, Liang SY. A generalised model of milling forces The International Journal of Advanced Manufacturing Technology. 14: 160-171. DOI: 10.1007/Bf01188411 |
0.424 |
|
1997 |
Zheng L, Liang SY. Identification of Cutter Axis Tilt in End Milling Journal of Manufacturing Science and Engineering-Transactions of the Asme. 119: 178-185. DOI: 10.1115/1.2831093 |
0.399 |
|
1997 |
Lazoglu I, Liang SY. Analytical Modeling Of Force System In Ball-End Milling Machining Science and Technology. 1: 219-234. DOI: 10.1080/10940349708945648 |
0.447 |
|
1997 |
Hekman KA, Liang SY. In-process monitoring of end milling cutter runout Mechatronics. 7: 1-10. DOI: 10.1016/S0957-4158(96)00038-4 |
0.45 |
|
1996 |
Wang JJ, Liang SY. Chip Load Kinematics in Milling With Radial Cutter Runout Journal of Engineering For Industry. 118: 111-116. DOI: 10.1115/1.2803631 |
0.432 |
|
1996 |
Zheng L, Chiou YS, Liang SY. Three dimensional cutting force analysis in end milling International Journal of Mechanical Sciences. 38: 259-269. DOI: 10.1016/0020-7403(95)00057-7 |
0.438 |
|
1995 |
Stevens AJ, Liang SY. Runout rejection in end milling through two-dimensional repetitive force control Mechatronics. 5: 1-13. DOI: 10.1016/0957-4158(94)00043-Q |
0.418 |
|
1995 |
Chiou YS, Chung ES, Liang SY. Analysis of tool wear effect on chatter stability in turning International Journal of Mechanical Sciences. 37: 391-404. DOI: 10.1016/0020-7403(94)00070-Z |
0.422 |
|
1994 |
Liang SY, Wang JJJ. Milling force convolution modeling for identification of cutter axis offset International Journal of Machine Tools & Manufacture. 34: 1177-1190. DOI: 10.1016/0890-6955(94)90021-3 |
0.388 |
|
1991 |
Liu M, Liang SY. Analytical modeling of acoustic emission for monitoring of peripheral milling process International Journal of Machine Tools and Manufacture. 31: 589-606. DOI: 10.1016/0890-6955(91)90039-6 |
0.428 |
|
Show low-probability matches. |