| Year |
Citation |
Score |
| 2014 |
Yu B, Kapoor SG, DeVor RE, Wentz JE. Investigation of flux decline in tortuous pore structures via three-dimensional simulation of cross-flow microfilter fouling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4026430 |
0.741 |
|
| 2013 |
Bourne KA, Kapoor SG, DeVor RE. Finite element-based study of the mechanics of microgroove cutting Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4024154 |
0.64 |
|
| 2013 |
Ghai I, Samuel J, DeVor RE, Kapoor SG. Analysis of Droplet Spreading on a Rotating Surface and the Prediction of Cooling and Lubrication Performance of an Atomization-Based Cutting Fluid System Journal of Manufacturing Science and Engineering-Transactions of the Asme. 135: 31003. DOI: 10.1115/1.4024153 |
0.571 |
|
| 2013 |
Zhu J, Kapoor SG, Devor RE, Park JK. A porous-restricted aerostatic lead screw actuator for high performance microscale machine tools Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4023111 |
0.576 |
|
| 2012 |
Yu B, Kapoor SG, Devor RE. Three-dimensional simulation of cross-flow microfilter fouling in tortuous pore profiles with semisynthetic metalworking fluids Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4007618 |
0.51 |
|
| 2012 |
Devor RE, Kapoor SG, Cao J, Ehmann KF. Transforming the landscape of manufacturing: Distributed manufacturing based on desktop manufacturing (DM) 2 Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4006095 |
0.556 |
|
| 2012 |
Nath C, Kapoor SG, DeVor RE, Srivastava AK. Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy Transactions of the North American Manufacturing Research Institution of Sme. 40: 315-323. DOI: 10.1016/J.Jmapro.2012.09.002 |
0.583 |
|
| 2012 |
Krejcie AJ, Kapoor SG, Devor RE. A hybrid process for manufacturing surgical-grade knife blade cutting edges from bulk metallic glass Journal of Manufacturing Processes. 14: 26-34. DOI: 10.1016/J.Jmapro.2011.09.001 |
0.569 |
|
| 2011 |
Bourne KA, Kapoor SG, DeVor RE. Study of the mechanics of the micro-groove cutting process Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 2: 339-348. DOI: 10.1115/MSEC2011-50076 |
0.574 |
|
| 2011 |
Ham S, Kapoor SG, Devor RE, Wentz JE. Three-dimensional fluid dynamic model for the prediction of microfiltration membrane fouling and flux decline Journal of Manufacturing Science and Engineering, Transactions of the Asme. 133. DOI: 10.1115/1.4003791 |
0.747 |
|
| 2011 |
Heinz K, Kapoor SG, DeVor RE, Surla V. An investigation of magnetic-field-assisted material removal in micro-EDM for nonmagnetic materials Journal of Manufacturing Science and Engineering, Transactions of the Asme. 133. DOI: 10.1115/1.4003488 |
0.577 |
|
| 2011 |
Calzada KA, Kapoor SG, DeVor RE, Samuel J, Srivastava AK. Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites Transactions of the North American Manufacturing Research Institution of Sme. 39: 332-341. DOI: 10.1016/J.Jmapro.2011.09.005 |
0.592 |
|
| 2011 |
Adair K, Kapoor SG, Devor RE. Development of a unique topology for a hard-turning micro-scale machine tool Journal of Manufacturing Processes. 13: 75-84. DOI: 10.1016/J.Jmapro.2010.11.001 |
0.626 |
|
| 2011 |
Adair KG, Kapoor SG, Devor RE. An approach to the economic manufacture of an aerostatic lead screw for micro-scale machine tools Journal of Manufacturing Processes. 13: 16-23. DOI: 10.1016/J.Jmapro.2010.09.001 |
0.59 |
|
| 2010 |
Yu B, Kapoor SG, DeVor RE. Three-dimensional simulation of cross-flow microfilter fouling in tortuous pore profiles with semi-synthetic metalworking fluids Asme 2010 International Manufacturing Science and Engineering Conference, Msec 2010. 2: 447-457. DOI: 10.1115/1.4007618 |
0.557 |
|
| 2010 |
Bourne K, Kapoor SG, DeVor RE. Study of a high performance AFM probe-based microscribing process Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0309061-03090610. DOI: 10.1115/1.4001414 |
0.621 |
|
| 2010 |
Ghai I, Wentz J, DeVor RE, Kapoor SG, Samuel J. Droplet behavior on a rotating surface for atomization-based cutting fluid application in micromachining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0110171-01101710. DOI: 10.1115/1.4000859 |
0.734 |
|
| 2010 |
Ham S, Kapoor SG, DeVor RE, Wentz J. The impact of surface forces on particle flow and membrane fouling in the microfiltration of metalworking fluids Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0110061-0110069. DOI: 10.1115/1.4000714 |
0.747 |
|
| 2009 |
Kapoor SG, DeVor RE, Samuel J. Carbon nanotube composites for the micro-world: Design for functionality and manufacturability International Conferences On Multi-Material Micro Manufacture, 4m/International Conferences On Micro Manufacturing, Icomm. 37-46. DOI: 10.1243/17547164C0012009005 |
0.542 |
|
| 2009 |
Ham S, Wentz JE, Kapoor SG, DeVor RE. The impact of surface forces on particle flow and pore blocking in the microfiltration of metalworking fluids Proceedings of the Asme International Manufacturing Science and Engineering Conference 2009, Msec2009. 1: 57-66. DOI: 10.1115/MSEC2009-84107 |
0.729 |
|
| 2009 |
Samuel J, Dikshit A, DeVor RE, Kapoor SG, Hsia KJ. Effect of carbon nanotube (CNT) loading on the thermomechanical properties and the machinability of CNT-reinforced polymer composites Journal of Manufacturing Science and Engineering, Transactions of the Asme. 131: 0310081-0310089. DOI: 10.1115/1.3123337 |
0.557 |
|
| 2009 |
Nagahanumaiah, Ramkumar J, Glumac N, Kapoor SG, Devor RE. Characterization of plasma in micro-EDM discharge using optical spectroscopy Journal of Manufacturing Processes. 11: 82-87. DOI: 10.1016/J.Jmapro.2009.10.002 |
0.506 |
|
| 2009 |
Ellicott GJ, DeVor RE, Kapoor SG. Machinability investigation of micro-scale hard turning of 52100 steel Transactions of the North American Manufacturing Research Institution of Sme. 37: 143-150. |
0.543 |
|
| 2008 |
Wentz JE, Kapoor SG, Devor RE, Rajagopalan N. Dynamic simulations of alumina membrane fouling from recycling of semisynthetic metalworking fluids Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0610151-06101511. DOI: 10.1115/1.2976149 |
0.716 |
|
| 2008 |
Wentz JE, Kapoor SG, DeVor RE, Rajagopalan N. Partial pore blocking in microfiltration recycling of a semisynthetic metalworking fluid Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0410141-0410149. DOI: 10.1115/1.2953234 |
0.719 |
|
| 2008 |
Dikshit A, Samuel J, DeVor RE, Kapoor SG. Microstructure-level machining simulation of carbon nanotube reinforced polymer composites - Part II: Model interpretation and application Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311151-0311158. DOI: 10.1115/1.2927431 |
0.6 |
|
| 2008 |
Dikshit A, Samuel J, DeVor RE, Kapoor SG. A microstructure-level material model for simulating the machining of carbon nanotube reinforced polymer composites Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311101-0311108. DOI: 10.1115/1.2917564 |
0.577 |
|
| 2008 |
Dikshit A, Samuel J, DeVor RE, Kapoor SG. Microstructure-level machining simulation of carbon nanotube reinforced polymer composites - part I: Model development and validation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311141-0311148. DOI: 10.1115/1.2917378 |
0.625 |
|
| 2008 |
Balasubramanian A, Jun MBG, DeVor RE, Kapoor SG. A submicron multiaxis positioning stage for micro- and nanoscale manufacturing processes Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311121-0311128. DOI: 10.1115/1.2917315 |
0.541 |
|
| 2008 |
Honegger A, Kapoor SG, DeVor RE. Calibration of palletized workpiece systems for microfactories Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311081-0311087. DOI: 10.1115/1.2917289 |
0.55 |
|
| 2008 |
Bourne KA, Jun MBG, Kapoor SG, DeVor RE. An acoustic emission-based method for determining contact between a tool and workpiece at the microscale Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311011-0311018. DOI: 10.1115/1.2917285 |
0.603 |
|
| 2008 |
Jun MBG, Joshi SS, DeVor RE, Kapoor SG. An experimental evaluation of an atomization-based cutting fluid application system for micromachining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311181-0311188. DOI: 10.1115/1.2738961 |
0.604 |
|
| 2008 |
Behera AK, Kapoor SG, DeVor RE. A classification and coding system for micro-assembly Ifip International Federation For Information Processing. 260: 37-53. DOI: 10.1007/978-0-387-77405-3_4 |
0.415 |
|
| 2008 |
Jun MBG, Devor RE, Kapoor SG, Englert F. Experimental investigation of machinability and tool wear in micro-endmilling Transactions of the North American Manufacturing Research Institution of Sme. 36: 201-208. |
0.586 |
|
| 2007 |
Park S, Kapoor SG, DeVor RE. Microstructure-level model for the prediction of tool failure in coated WC-Co cutting tool materials during intermittent cutting Journal of Manufacturing Science and Engineering, Transactions of the Asme. 129: 893-901. DOI: 10.1115/1.2738507 |
0.624 |
|
| 2007 |
Liu X, Devor RE, Kapoor SG. Model-based analysis of the surface generation in microendmilling - Part II: Experimental validation and analysis Journal of Manufacturing Science and Engineering, Transactions of the Asme. 129: 461-469. DOI: 10.1115/1.2716706 |
0.607 |
|
| 2007 |
Liu X, DeVor RE, Kapoor SG. Model-based analysis of the surface generation in microendmilling - Part I: Model development Journal of Manufacturing Science and Engineering, Transactions of the Asme. 129: 453-460. DOI: 10.1115/1.2716705 |
0.606 |
|
| 2007 |
Sampath K, Kapoor SG, Devor RE. Modeling and prediction of cutting noise in the face-milling process Journal of Manufacturing Science and Engineering, Transactions of the Asme. 129: 527-530. DOI: 10.1115/1.2716702 |
0.586 |
|
| 2007 |
Sampath K, Kapoor SG, DeVor RE. Modeling and analysis of aerodynamic noise in milling cutters Journal of Manufacturing Science and Engineering, Transactions of the Asme. 129: 5-11. DOI: 10.1115/1.2335861 |
0.492 |
|
| 2007 |
Ballou JR, Joshi SS, DeVor RE, Kapoor SG. Burr formation in drilling intersecting holes with Machinable Austempered Ductile Iron (MADI™) Journal of Manufacturing Processes. 9: 35-46. DOI: 10.1016/S1526-6125(07)70106-8 |
0.615 |
|
| 2007 |
Jun MBG, Bourne K, DeVor RE, Kapoor SG. Estimation of effective error parameters in high-speed micro-endmilling International Journal of Machine Tools and Manufacture. 47: 1449-1454. DOI: 10.1016/J.Ijmachtools.2006.09.027 |
0.566 |
|
| 2007 |
Devor RE, Ehmann KF. Introduction Micromanufacturing: International Research and Development. 1-9. DOI: 10.1007/978-1-4020-5949-0_1 |
0.47 |
|
| 2007 |
Bittorf PJ, Kapoor SG, DeVor RE, Rajagopalan N. Transiently stable emulsions for metalworking fluids Transactions of the North American Manufacturing Research Institution of Sme. 35: 343-350. |
0.518 |
|
| 2007 |
Bourne KA, Jun MBG, Kapoor SG, DeVor RE. Effect of tool-tip vibration and stability on acoustic emission generation in micro-endmilling Proceedings of the 15th International Symposium On Electromachining, Isem 2007. 625-630. |
0.535 |
|
| 2007 |
Araujo AC, Jun MBG, Kapoor SG, DeVor RE. Experimental investigation of a combined drilling and thread milling process: Thrilling Transactions of the North American Manufacturing Research Institution of Sme. 35: 513-520. |
0.561 |
|
| 2006 |
Wentz JE, Kapoor SG, DeVor RE, Rajagopalan N. Development of a novel metalworking fluid engineered for use with microfiltration recycling Proceedings of Stle/Asme International Joint Tribology Conference, Ijtc 2006. 2006. DOI: 10.1115/1.2401207 |
0.733 |
|
| 2006 |
Jun MBG, DeVor RE, Kapoor SG. Investigation of the dynamics of microend milling - Part II: Model validation and interpretation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 901-912. DOI: 10.1115/1.2335854 |
0.576 |
|
| 2006 |
Park S, Kapoor SG, DeVor RE. Microstructure-level model for the prediction of tool failure in WC-Co cutting tool materials Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 739-748. DOI: 10.1115/1.2194233 |
0.625 |
|
| 2006 |
Jun MBG, Liu X, DeVor RE, Kapoor SG. Investigation of the dynamics of microend milling - Part I: Model development Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 893-900. DOI: 10.1115/1.2193546 |
0.619 |
|
| 2006 |
Honegger A, Kapoor SG, DeVor RE. A hybrid methodology for kinematic calibration of micro/meso-scale machine tools (mMTs) Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 513-522. DOI: 10.1115/1.2162910 |
0.586 |
|
| 2006 |
Liu X, DeVor RE, Kapoor SG. An analytical model for the prediction of minimum chip thickness in micromachining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 474-481. DOI: 10.1115/1.2162905 |
0.642 |
|
| 2006 |
Samuel J, DeVor RE, Kapoor SG, Hsia KJ. Experimental investigation of the machinability of polycarbonate reinforced with multiwalled carbon nanotubes Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 465-473. DOI: 10.1115/1.2137753 |
0.581 |
|
| 2006 |
Warrington C, Kapoor SG, Devor R. Finite Element Modeling for Tap Design Improvement in Form Tapping Journal of Manufacturing Science and Engineering-Transactions of the Asme. 128: 65-73. DOI: 10.1115/1.2117427 |
0.563 |
|
| 2006 |
Araujo AC, Silveira JL, Jun MBG, Kapoor SG, DeVor R. A model for thread milling cutting forces International Journal of Machine Tools & Manufacture. 46: 2057-2065. DOI: 10.1016/J.Ijmachtools.2005.12.012 |
0.669 |
|
| 2006 |
Bhattacharyya O, Jun MB, Kapoor SG, DeVor RE. The effects of process faults and misalignments on the cutting force system and hole quality in reaming International Journal of Machine Tools and Manufacture. 46: 1281-1290. DOI: 10.1016/J.Ijmachtools.2005.11.002 |
0.616 |
|
| 2006 |
Phillip AG, Kapoor SG, DeVor RE. A new acceleration-based methodology for micro/meso-scale machine tool performance evaluation International Journal of Machine Tools and Manufacture. 46: 1435-1444. DOI: 10.1016/J.Ijmachtools.2005.09.015 |
0.599 |
|
| 2006 |
Bhattacharyya O, Kapoor SG, Devor RE. Mechanistic model for the reaming process with emphasis on process faults International Journal of Machine Tools and Manufacture. 46: 836-846. DOI: 10.1016/J.Ijmachtools.2005.07.022 |
0.653 |
|
| 2006 |
Bittorf PJ, Kapoor SG, DeVor RE, Rajagopalan N. Effect of water phase surface tension and viscosity on metalworking fluid functionality Transactions of the North American Manufacturing Research Institute of Sme. 34: 555-562. |
0.556 |
|
| 2005 |
Bless PN, Kapoor SG, DeVor RE, Klabjan D. An algorithmic strategy for automated generation of multicomponent software tools for virtual manufacturing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 127: 866-874. DOI: 10.1115/1.1954792 |
0.772 |
|
| 2005 |
Warrington C, Kapoor SG, Devor R. Experimental Investigation of Thread Formation in Form Tapping Journal of Manufacturing Science and Engineering-Transactions of the Asme. 127: 829-836. DOI: 10.1115/1.1951784 |
0.586 |
|
| 2005 |
Paul A, Kapoor SG, DeVor RE. A chisel edge model for arbitrary drill point geometry Journal of Manufacturing Science and Engineering, Transactions of the Asme. 127: 23-32. DOI: 10.1115/1.1826076 |
0.627 |
|
| 2005 |
Degenhardt JA, DeVor RE, Kapoor SG. Generalized groove-type chip breaker effects on drilling for different drill diameters and flute shapes International Journal of Machine Tools and Manufacture. 45: 1588-1597. DOI: 10.1016/J.Ijmachtools.2005.02.009 |
0.595 |
|
| 2005 |
Paul A, Kapoor SG, DeVor RE. Chisel edge and cutting lip shape optimization for improved twist drill point design International Journal of Machine Tools and Manufacture. 45: 421-431. DOI: 10.1016/J.Ijmachtools.2004.09.010 |
0.56 |
|
| 2005 |
Wentz JE, Kapoor SG, DeVor RE, Rajagopalan N. Experimental investigation of membrane fouling due to microfiltration of semi-synthetic metalworking fluids Transactions of the North American Manufacturing Research Institute of Sme. 33: 281-288. |
0.688 |
|
| 2004 |
Liu X, Jun MBG, Devor RE, Kapoor SG. Cutting mechanisms and their influence on dynamic forces, vibrations and stability in micro-endmilling American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 15: 583-592. DOI: 10.1115/IMECE2004-62416 |
0.6 |
|
| 2004 |
Park S, Kapoor SG, DeVor RE. Mechanistic cutting process calibration via microstructure-level finite element simulation model Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 706-709. DOI: 10.1115/1.1813480 |
0.639 |
|
| 2004 |
Vogler MP, Kapoor SG, DeVor RE. On the modeling and analysis of machining performance in micro-endmilling, part II: Cutting force prediction Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 695-705. DOI: 10.1115/1.1813471 |
0.824 |
|
| 2004 |
Vogler MP, DeVor RE, Kapoor SG. On the modeling and analysis of machining performance in micro-endmilling, part i: Surface generation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 685-694. DOI: 10.1115/1.1813470 |
0.805 |
|
| 2004 |
Liu X, DeVor RE, Kapoor SG, Ehmann KF. The mechanics of machining at the microscale: Assessment of the current state of the science Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 666-678. DOI: 10.1115/1.1813469 |
0.683 |
|
| 2004 |
Greeley MH, DeVor RE, Kapoor SG, Rajagopalan N. The influence of fluid management policy and operational changes on metalworking fluid functionality Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 445-450. DOI: 10.1115/1.1765145 |
0.526 |
|
| 2004 |
Sahu SK, Devor RE, Kapoor SG. Modeling of forces for drills with chip-breaking grooves Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 555-564. DOI: 10.1115/1.1763183 |
0.655 |
|
| 2004 |
Jun MB, Kapoor SG, Devor RE. The effects of end mill alignment errors on vibrations at high spindle speeds Transactions of the North American Manufacturing Research Institute of Sme. 32: 9-16. |
0.593 |
|
| 2003 |
Yang L, DeVor RE, Kapoor SG. Analysis of force shape characteristics and detection of depth-of-cut variations in end milling American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 14: 161-169. DOI: 10.1115/1.1947207 |
0.562 |
|
| 2003 |
Chowdhary S, DeVor RE, Kapoor SG. Modeling forces including elastic recovery for internal thread forming Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 681-688. DOI: 10.1115/1.1619178 |
0.63 |
|
| 2003 |
Eppert JJ, DeVor RE, Kapoor SG, Rajagopalan N. The effect of chip adsorption on selective depletion from a multi-component synthetic metalworking fluid Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 703-708. DOI: 10.1115/1.1615794 |
0.54 |
|
| 2003 |
Zhu R, DeVor RE, Kapoor SG. A model-based monitoring and fault diagnosis methodology for free-form surface machining process Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 397-404. DOI: 10.1115/1.1586307 |
0.686 |
|
| 2003 |
Mellinger JC, Ozdoganlar OB, DeVor RE, Kapoor SG. Modeling chip-evacuation forces in drilling for various flute geometries Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 405-415. DOI: 10.1115/1.1578671 |
0.624 |
|
| 2003 |
Chuzhoy L, DeVor RE. Machining simulation of ductile iron and its constituents, Part 2: Numerical simulation and experimental validation of machining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 192-201. DOI: 10.1115/1.1557295 |
0.753 |
|
| 2003 |
Chuzhoy L, DeVor RE, Kapoor SG, Beaudoin AJ, Bammann DJ. Machining simulation of ductile iron and its constituents, Part 1: Estimation of material model parameters and their validation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 181-191. DOI: 10.1115/1.1557294 |
0.705 |
|
| 2003 |
Eppert JJ, Rajagopalan N, DeVor RE, Kapoor SG. Modeling the effect of tramp oil contamination on selective component depletion in metalworking fluid systems Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 85-94. DOI: 10.1115/1.1537259 |
0.555 |
|
| 2003 |
Gupta K, Ozdoganlar OB, Kapoor SG, DeVor RE. Modeling and prediction of hole profile in drilling, part 2: modeling hole profile Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 14-20. DOI: 10.1115/1.1536933 |
0.573 |
|
| 2003 |
Gupta K, Ozdoganlar OB, Kapoor SG, DeVor RE. Modeling and prediction of hole profile in drilling, Part 1: modeling drill dynamics in the presence of drill alignment errors Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 6-13. DOI: 10.1115/1.1536932 |
0.6 |
|
| 2003 |
Sahu SK, Burak Ozdoganlar O, DeVor RE, Kapoor SG. Effect of groove-type chip breakers on twist drill performance International Journal of Machine Tools and Manufacture. 43: 617-627. DOI: 10.1016/S0890-6955(02)00303-6 |
0.598 |
|
| 2003 |
Greeley MH, DeVor RE, Kapoor SG, Rajagopalan N. Evaluating performance changes due to gradual component depletion in metalworking fluids Transactions of the North American Manufacturing Research Institution of Sme. 31: 337-344. |
0.453 |
|
| 2003 |
Lu J, Ozdoganlar OB, Kapoor SG, DeVor RE. A process-model based methodology for comprehensive process planning of contour turning operations Transactions of the North American Manufacturing Research Institution of Sme. 31: 547-554. |
0.475 |
|
| 2002 |
Bless PN, Kapoor SG, DeVor RE. An architecture for the development of multi-component software tools for virtual manufacturing Asme International Mechanical Engineering Congress and Exposition, Proceedings. 47-56. DOI: 10.1115/IMECE2002-32466 |
0.783 |
|
| 2002 |
Reddy RG, Ozdoganlar OB, Kapoor SG, DeVor RE, Liu X. A stability solution for the axial contour-turning process Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 581-587. DOI: 10.1115/1.1480415 |
0.71 |
|
| 2002 |
Mezentsev OA, DeVor RE, Kapoor SG. Prediction of thread quality by detection and estimation of tapping faults Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 643-650. DOI: 10.1115/1.1475319 |
0.556 |
|
| 2002 |
Mellinger JC, Ozdoganlar OB, DeVor RE, Kapoor SG. Modeling chip-evacuation forces and prediction of chip-clogging in drilling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 605-614. DOI: 10.1115/1.1473146 |
0.627 |
|
| 2002 |
Fang B, DeVor RE, Kapoor SG. Influence of friction damping on workpiece-fixture system dynamics and machining stability Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 226-233. DOI: 10.1115/1.1459086 |
0.643 |
|
| 2002 |
Kalidas S, Kapoor SG, DeVor RE. Influence of thermal effects on hole quality in dry drilling, Part 2: Thermo-elastic effects on hole quality Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 267-274. DOI: 10.1115/1.1458014 |
0.581 |
|
| 2002 |
Kalidas S, Kapoor SG, DeVor RE. Influence of thermal effects on hole quality in dry drilling, Part 1: A thermal model of workpiece temperatures Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 258-266. DOI: 10.1115/1.1455645 |
0.55 |
|
| 2002 |
Chuzhoy L, DeVor RE, Kapoor SG, Bammann DJ. Microstructure-level modeling of ductile iron machining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 162-169. DOI: 10.1115/1.1455642 |
0.758 |
|
| 2002 |
Dogra APS, DeVor RE, Kapoor SG. Analysis of feed errors in tapping by contact stress model Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 248-257. DOI: 10.1115/1.1454107 |
0.604 |
|
| 2002 |
Dogra APS, Kapoor SG, DeVor RE. Mechanistic model for tapping process with emphasis on process faults and hole geometry Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 18-25. DOI: 10.1115/1.1430237 |
0.589 |
|
| 2002 |
Vogler MP, DeVor RE, Kapoor SG. Nonlinear influence of effective lead angle in turning process stability Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 473-475. DOI: 10.1115/1.1419200 |
0.797 |
|
| 2002 |
Sastry S, Kapoor SG, DeVor RE. Floquet theory based approach for stability analysis of the variable speed face-milling process Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 10-17. DOI: 10.1115/1.1418695 |
0.55 |
|
| 2002 |
Jun MB, Burak Ozdoganlar O, DeVor RE, Kapoor SG, Kirchheim A, Schaffner G. Evaluation of a spindle-based force sensor for monitoring and fault diagnosis of machining operations International Journal of Machine Tools and Manufacture. 42: 741-751. DOI: 10.1016/S0890-6955(01)00156-0 |
0.588 |
|
| 2002 |
Mezentsev OA, Zhu R, DeVor RE, Kapoor SG, Kline WA. Use of radial forces for fault detection in tapping International Journal of Machine Tools and Manufacture. 42: 479-488. DOI: 10.1016/S0890-6955(01)00139-0 |
0.659 |
|
| 2002 |
Parakkal G, Zhu R, Kapoor SG, DeVor RE. Modeling of turning process cutting forces for grooved tools International Journal of Machine Tools and Manufacture. 42: 179-191. DOI: 10.1016/S0890-6955(01)00121-3 |
0.742 |
|
| 2002 |
Chowdhary S, Kapoor SG, Ozdoganlar OB, DeVor RE. Modeling and analysis of internal thread forming Technical Paper - Society of Manufacturing Engineers. Mr. 1-8. |
0.489 |
|
| 2002 |
Vogler MP, Liu X, Kapoor SG, DeVor RE, Ehmann KF. Development of meso-scale machine tool (mMT) systems Technical Paper - Society of Manufacturing Engineers. Ms. 1-9. |
0.818 |
|
| 2001 |
Chuzhoy L, DeVor RE, Kapoor SG, Beaudoin AJ, Bammann DJ. Machining simulation of ductile iron and its constituents. Part I: Estimation of material model parameters and their validation American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 12: 135-144. DOI: 10.1115/1.1557294 |
0.768 |
|
| 2001 |
Vogler MP, DeVor RE, Kapoor SG. Microstructure-level force prediction model for micro-milling of multi-phase materials American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 12: 3-10. DOI: 10.1115/1.1556402 |
0.794 |
|
| 2001 |
Jacobus K, Kapoor SG, DeVor RE. Experimentation on the residual stresses generated by endmilling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 748-753. DOI: 10.1115/1.1392995 |
0.544 |
|
| 2001 |
Skerlos SJ, Rajagopalan N, DeVor RE, Kapoor SG, Angspatt VD. Microfiltration of polyoxyalkylene metalworking fluid lubricant additives using aluminum oxide membranes Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 692-699. DOI: 10.1115/1.1392993 |
0.683 |
|
| 2001 |
Fang B, DeVor RE, Kapoor SG. An elastodynamic model of frictional contact and its influence on the dynamics of a workpiece-fixture system Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 481-489. DOI: 10.1115/1.1381006 |
0.573 |
|
| 2001 |
Sastry S, Kapoor SG, DeVor RE, Dullerud GE. Chatter stability analysis of the variable speed face-milling process Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 753-756. DOI: 10.1115/1.1373649 |
0.531 |
|
| 2001 |
Jacobus K, DeVor RE, Kapoor SG, Peascoe RA. Predictive model for the full biaxial surface and subsurface residual stress profiles from turning Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 537-546. DOI: 10.1115/1.1372197 |
0.585 |
|
| 2001 |
Zhu R, Kapoor SG, DeVor RE. Mechanistic modeling of the ball end milling process for multi-axis machining of free-form surfaces Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 369-379. DOI: 10.1115/1.1369357 |
0.74 |
|
| 2001 |
Smithey DW, Kapoor SG, DeVor RE. A new mechanistic model for predicting worn tool cutting forces Machining Science and Technology. 5: 23-42. DOI: 10.1081/Mst-100103176 |
0.641 |
|
| 2001 |
Reddy RG, DeVor RE, Kapoor SG. A mechanistic force model for combined axial-radial contour turning International Journal of Machine Tools and Manufacture. 41: 1551-1572. DOI: 10.1016/S0890-6955(01)00030-X |
0.72 |
|
| 2001 |
Reddy RG, DeVor RE, Kapoor SG, Sun Z. A mechanistic model-based force-feedback scheme for voice-coil actuated radial contour turning International Journal of Machine Tools and Manufacture. 41: 1131-1147. DOI: 10.1016/S0890-6955(01)00009-8 |
0.684 |
|
| 2001 |
Jayaram S, Kapoor SG, Devor RE. Estimation of the specific cutting pressures for mechanistic cutting force models International Journal of Machine Tools and Manufacture. 41: 265-281. DOI: 10.1016/S0890-6955(00)00076-6 |
0.602 |
|
| 2001 |
Iyer A, Kapoor SG, DeVor RE. CAD data visualization for machining simulation using the STEP standard Journal of Manufacturing Systems. 20: 198-209. DOI: 10.1016/S0278-6125(01)80041-8 |
0.606 |
|
| 2001 |
Kalidas S, DeVor RE, Kapoor SG. Experimental investigation of the effect of drill coatings on hole quality under dry and wet drilling conditions Surface and Coatings Technology. 148: 117-128. DOI: 10.1016/S0257-8972(01)01349-4 |
0.543 |
|
| 2001 |
Chuzhoy L, DeVor RE, Kapoor SG. Machining simulation of ductile iron and its constituents. Part II: Numerical simulation and experimental validation of machining American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 12: 145-155. |
0.78 |
|
| 2000 |
Jacobus K, DeVor RE, Kapoor SG. Machining-induced residual stress: Experimentation and modeling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 122: 20-31. DOI: 10.1115/1.538906 |
0.589 |
|
| 2000 |
Skerlos SJ, Rajagopalan N, DeVor RE, Kapoor SG, Angspatt VD. Ingredient-Wise Study of Flux Characteristics in the Ceramic Membrane Filtration of Uncontaminated Synthetic Metalworking Fluids, Part 1: Experimental Investigation of Flux Decline Journal of Manufacturing Science and Engineering-Transactions of the Asme. 122: 739-745. DOI: 10.1115/1.1286132 |
0.691 |
|
| 2000 |
Skerlos SJ, Rajagopalan N, DeVor RE, Kapoor SG, Angspatt VD. Ingredient-wise study of flux characteristics in the ceramic membrane filtration of uncontaminated synthetic metalworking fluids, part 2: Analysis of underlying mechanisms Journal of Manufacturing Science and Engineering, Transactions of the Asme. 122: 746-752. DOI: 10.1115/1.1286131 |
0.694 |
|
| 2000 |
Reddy RG, Kapoor SG, DeVor RE. A mechanistic force model for contour turning Journal of Manufacturing Science and Engineering, Transactions of the Asme. 122: 398-405. DOI: 10.1115/1.1285900 |
0.733 |
|
| 2000 |
Jayaram S, Kapoor SG, DeVor RE. Analytical stability analysis of variable spindle speed machining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 122: 391-397. DOI: 10.1115/1.1285890 |
0.603 |
|
| 2000 |
Sastry S, Kapoor SG, Devor RE. Compensation of progressive radial run-out in face-milling by spindle speed variation International Journal of Machine Tools and Manufacture. 40: 1121-1139. DOI: 10.1016/S0890-6955(99)00115-7 |
0.596 |
|
| 2000 |
Smithey DW, Kapoor SG, Devor RE. Worn tool force model for three-dimensional cutting operations International Journal of Machine Tools and Manufacture. 40: 1929-1950. DOI: 10.1016/S0890-6955(00)00017-1 |
0.653 |
|
| 2000 |
Skerlos SJ, Rajagopalan N, DeVor RE, Kapoor SG, Sanford RA. Model of biomass concentration in membrane filtration recycling systems subject to single substrate-limited growth kinetics American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 11: 813-820. |
0.562 |
|
| 1999 |
Waldorf DJ, DeVor RE, Kapoor SG. An evaluation of ploughing models for orthogonal machining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 121: 550-558. DOI: 10.1115/1.2833050 |
0.659 |
|
| 1999 |
Zhu R, Kapoor SG, DeVor RE, Athavale SM. Mechanistic force models for chip control tools Journal of Manufacturing Science and Engineering, Transactions of the Asme. 121: 408-416. DOI: 10.1115/1.2832696 |
0.739 |
|
| 1999 |
Waldorf DJ, Kapoor SG, DeVor RE. Worn tool forces based on ploughing stresses Technical Paper - Society of Manufacturing Engineers. Mr. 1-6. |
0.566 |
|
| 1999 |
Jacobus JK, DeVor RE, Kapoor SG. Part warpage model based on machining-induced residual stress Technical Paper - Society of Manufacturing Engineers. Mr. 1-6. |
0.51 |
|
| 1998 |
Waldorf DJ, Devor RE, Kapoor SG. A slip-line field for ploughing during orthogonal cutting Journal of Manufacturing Science and Engineering, Transactions of the Asme. 120: 693-699. DOI: 10.1115/1.2830208 |
0.627 |
|
| 1998 |
Chandrasekharan V, Kapoor SG, DeVor RE. A mechanistic model to predict the cutting force system for arbitrary drill point geometry Journal of Manufacturing Science and Engineering, Transactions of the Asme. 120: 563-570. DOI: 10.1115/1.2830160 |
0.644 |
|
| 1998 |
Kapoor SG, DeVor RE, Zhu R, Gajjela R, Parakkal G, Smithey D. Development Of Mechanistic Models For The Prediction Of Machining Performance: Model Building Methodology Machining Science and Technology. 2: 213-238. DOI: 10.1080/10940349808945669 |
0.737 |
|
| 1997 |
Ehmann KF, Kapoor SG, DeVor RE, Lazoglu I. Machining process modeling: A review Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 655-663. DOI: 10.1115/1.2836805 |
0.706 |
|
| 1997 |
Gu F, Melkote SN, Kapoor SG, Devor RE. A model for the prediction of surface flatness in face milling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 476-484. DOI: 10.1115/1.2831177 |
0.634 |
|
| 1997 |
Gu F, Kapoor SG, Devor RE, Bandyopadhyay P. An enhanced cutting force model for face milling with variable cutter feed motion and complex workpiece geometry Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 467-475. DOI: 10.1115/1.2831176 |
0.648 |
|
| 1997 |
Radulescu R, Kapoor SG, DeVor RE. An investigation of variable spindle speed face milling for tool-work structures with complex dynamics, part 2: Physical explanation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 273-280. DOI: 10.1115/1.2831104 |
0.632 |
|
| 1997 |
Radulescu R, Kapoor SG, DeVor RE. An investigation of variable spindle speed face milling for tool-work structures with complex dynamics, part 1: Simulation results Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 266-272. DOI: 10.1115/1.2831103 |
0.621 |
|
| 1997 |
Gu F, Kapoor SG, DeVor RE, Bandyopadhyay P. Enhanced cutting force model for face milling with variable cutter feed motion and complex workpiece geometry Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119. |
0.606 |
|
| 1997 |
Gu F, Melkote SN, Kapoor SG, DeVor RE. Model for the prediction of surface flatness in face milling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119. |
0.59 |
|
| 1996 |
DiPaolo G, Kapoor SG, DeVor RE. An experimental investigation of the crack growth phenomenon for drilling of fiber-reinforced composite materials Journal of Engineering For Industry - Transactions of the Asme. 118: 104-110. DOI: 10.1115/1.2803629 |
0.504 |
|
| 1995 |
Chandrasekharan V, Kapoor SG, DeVor RE. Mechanistic approach to predicting the cutting forces in drilling: With application to fiber-reinforced composite materials Journal of Engineering For Industry. 117: 559-570. DOI: 10.1115/1.2803534 |
0.644 |
|
| 1995 |
Endres WJ, DeVor RE, Kapoor SG. Dual-mechanism approach to the prediction of machining forces, part 2: Calibration and validation Journal of Engineering For Industry. 117: 534-541. DOI: 10.1115/1.2803531 |
0.632 |
|
| 1995 |
Endres WJ, DeVor RE, Kapoor SG. Dual-mechanism approach to the prediction of machining forces, part 1: Model development Journal of Engineering For Industry. 117: 526-533. DOI: 10.1115/1.2803530 |
0.645 |
|
| 1994 |
Rahn GE, Kapoor SG, DeVor RE. Single-subgroup performance measures and diagnostic procedures for X-bar control charts Journal of Engineering For Industry. 116: 216-224. DOI: 10.1115/1.2901933 |
0.494 |
|
| 1993 |
Ehmann KF, Kapoor SG, DeVor RE. Professor Shien-Ming (Sam) Wu Journal of Engineering For Industry. 115: 167-168. DOI: 10.1115/1.2901646 |
0.453 |
|
| 1993 |
Subramani G, Kapoor SG, DeVor RE. Model for the prediction of bore cylindricity during machining Journal of Engineering For Industry. 115: 15-22. DOI: 10.1115/1.2901630 |
0.662 |
|
| 1993 |
Dipaolo G, Kapoor SG, DeVor RE. Experimental investigation of the crack growth phenomenon for drilling of fiber-reinforced composite materials American Society of Mechanical Engineers, Materials Division (Publication) Md. 45: 15-31. |
0.444 |
|
| 1992 |
Waldorf DJ, Kapoor SG, DeVor RE. Automatic recognition of tool wear on a face mill using a mechanistic modeling approach Wear. 157: 305-323. DOI: 10.1016/0043-1648(92)90069-K |
0.626 |
|
| 1991 |
Kapoor SG, Devor RE, Skarvan RD. An enhanced computer-based process simulation model for the cylinder boring process Sae Technical Papers. DOI: 10.4271/910957 |
0.578 |
|
| 1991 |
Rahn GE, Kapoor SG, DeVor RE. Development of operational characteristics and diagnostic procedures for X̄ control charts American Society of Mechanical Engineers, Production Engineering Division (Publication) Ped. 55: 403-419. |
0.474 |
|
| 1990 |
Subramani G, Whitmore MC, Kapoor SG, DeVor RE. Temperature distribution in a hollow cylindrical workpiece during machining. Theoretical model and experimental results American Society of Mechanical Engineers, Production Engineering Division (Publication) Ped. 43: 245-260. DOI: 10.1115/1.2899710 |
0.56 |
|
| 1990 |
Lin SC, DeVor RE, Kapoor SG. The Effects of Variable Speed Cutting on Vibration Control in Face Milling Journal of Engineering For Industry. 112: 1-11. DOI: 10.1115/1.2899290 |
0.593 |
|
| 1990 |
Lin SC, DeVor RE, Kapoor SG. Effects of variable speed cutting on vibration control in face milling Journal of Engineering For Industry. 112: 1-11. |
0.508 |
|
| 1990 |
Endres WJ, Sutherland JW, DeVor RE, Kapoor SG. Dynamic model of the cutting force system in the turning process American Society of Mechanical Engineers, Production Engineering Division (Publication) Ped. 44: 193-212. |
0.634 |
|
| 1988 |
Sutherland JW, Devor RE, Kapoor SG, Ferreira PM. Machining process models for product and process design Sae Technical Papers. DOI: 10.4271/880793 |
0.573 |
|
| 1988 |
CHOW ETS, WEI LS, DEVOR RE, STEINBERG MP. Performance of Ingredients in a Soybean Whipped Topping: A Response Surface Analysis Journal of Food Science. 53: 1761-1765. DOI: 10.1111/J.1365-2621.1988.Tb07836.X |
0.317 |
|
| 1987 |
Dessouky MI, Kapoor SG, DeVor RE. METHODOLOGY FOR INTEGRATED QUALITY SYSTEMS Journal of Engineering For Industry. 109: 241-247. DOI: 10.1115/1.3187125 |
0.523 |
|
| 1987 |
Dooley KJ, Dessouky MI, DeVor RE, Kapoor SG. STATISTICAL PROCESS CONTROL FOR MAINTENANCE ACTIVITIES IN MANUFACTURING American Society of Mechanical Engineers, Production Engineering Division (Publication) Ped. 27: 93-104. |
0.469 |
|
| 1986 |
Dooley KJ, Kapoor SG, Dessouky MI, DeVor RE. INTEGRATED QUALITY SYSTEMS APPROACH TO QUALITY AND PRODUCTIVITY IMPROVEMENT IN CONTINUOUS MANUFACTURING PROCESSES Journal of Engineering For Industry. 108: 322-327. DOI: 10.1115/1.3187083 |
0.553 |
|
| 1986 |
Sutherland JW, DeVor RE. IMPROVED METHOD FOR CUTTING FORCE AND SURFACE ERROR PREDICTION IN FLEXIBLE END MILLING SYSTEMS Journal of Engineering For Industry. 108: 269-279. DOI: 10.1115/1.3187077 |
0.66 |
|
| 1985 |
Lee SJ, Kapoor SG, DeVor RE. INTEGRATED MACHINING PROCESS DESIGN SIMULATOR FOR THE OPTIMAL DESIGN OF FACE MILLING SYSTEMS Journal of Engineering For Industry. 107: 301-308. DOI: 10.1115/1.3186002 |
0.606 |
|
| 1985 |
Kapoor SG, Ding F, Zhang GM, Devor RE. TIME-VARYING PARAMETER MODEL FOR THE STABILITY ANALYSIS OF INTERMITTENT TURNING PROCESSES Manufacturing Engineering Transactions. 551-557. |
0.5 |
|
| 1984 |
Fu HJ, DeVor RE, Kapoor SG. MECHANISTIC MODEL FOR THE PREDICTION OF THE FORCE SYSTEM IN FACE MILLING OPERATIONS American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3185915 |
0.659 |
|
| 1984 |
Fu HJ, Devor RE, Kapoor SG. OPTIMAL DESIGN OF TOOTH SPACING IN FACE MILLING VIA A DYNAMIC FORCE MODEL Manufacturing Engineering Transactions. 291-297. |
0.52 |
|
| 1983 |
CHOW ETS, WEI LS, DEVOR RE, STEINBERG MP. Application of Two‐Level Fractional Factorial Designs in Development of a Soybean Whipped Topping Journal of Food Science. 48: 230-234. DOI: 10.1111/J.1365-2621.1983.Tb14830.X |
0.312 |
|
| 1983 |
Kline WA, DeVor RE. The effect of runout on cutting geometry and forces in end milling International Journal of Machine Tool Design and Research. 23: 123-140. DOI: 10.1016/0020-7357(83)90012-4 |
0.474 |
|
| 1983 |
Devor RE, Kapoor SG, Fu HJ, Subbarao PC. EFFECT OF VARIABLE CHIP LOAD ON MACHINING PERFORMANCE IN FACE MILLING Manufacturing Engineering Transactions. 348-355. |
0.509 |
|
| 1982 |
Kline WA, DeVor RE, Shareef IA. The Prediction of Surface Accuracy in End Milling Journal of Engineering For Industry. 104: 272-278. DOI: 10.1115/1.3185830 |
0.334 |
|
| 1982 |
Kline WA, DeVor RE, Lindberg JR. The prediction of cutting forces in end milling with application to cornering cuts International Journal of Machine Tool Design and Research. 22: 7-22. DOI: 10.1016/0020-7357(82)90016-6 |
0.481 |
|
| 1981 |
DeVor RE, Kapoor SG. APPLICATION OF DYNAMIC DATA SYSTEM TO THE INDENTIFICATION OF CUTTING FORCE SIGNATURES IN END MILLING Modeling and Simulation, Proceedings of the Annual Pittsburgh Conference. 12: 335-341. |
0.528 |
|
| 1980 |
Miller JC, Devor RE. An experimental approach to machinability testing Sae Technical Papers. DOI: 10.4271/800487 |
0.356 |
|
| 1980 |
Devor RE, Kline WA, Zdeblick WJ. MECHANISTIC MODEL FOR THE FORCE SYSTEM IN END MILLING WITH APPLICATION TO MACHINING AIRFRAME STRUCTURES Manufacturing Engineering Transactions. 297-230. |
0.323 |
|
| 1977 |
Zdeblick WJ, DeVor RE. An experimental strategy for designing tool life experiments . DOI: 10.1115/1.3439459 |
0.331 |
|
| 1976 |
DeVor RE, Anderson DL. Tool life variation and its influence on the development of tool life models . DOI: 10.1115/1.3439281 |
0.359 |
|
| 1972 |
DeVor RE, Wu SM. SURFACE PROFILE CHARACTERIZATION BY AUTOREGRESSIVE-MOVING AVERAGE MODELS J Eng Ind Trans Asme. 94: 825-832. DOI: 10.1115/1.3428257 |
0.341 |
|
| Show low-probability matches. |
