Year |
Citation |
Score |
2023 |
Yoo S, Lee Y, Choi M, Nam H, Nam S, Kang N. Enhancing Microstructural and Mechanical Properties of Ferrous Medium-Entropy Alloy through Cu Addition and Post-Weld Heat Treatment in Gas Tungsten Arc Welding. Materials (Basel, Switzerland). 17. PMID 38204033 DOI: 10.3390/ma17010181 |
0.396 |
|
2021 |
Nam H, Yoo J, Yun K, Xian G, Park H, Kim N, Song S, Kang N. Comprehensive Analysis of Cold-Cracking Ratio for Flux-Cored Arc Steel Welds Using Y- and y-Grooves. Materials (Basel, Switzerland). 14. PMID 34576574 DOI: 10.3390/ma14185349 |
0.383 |
|
2020 |
Park C, Lee J, Kang N, Chun E. Correlation between Microstructure and Tribological Properties of Laser Surface Heat-Treated Stellite Coatings The Coatings. 10: 433. DOI: 10.3390/Coatings10050433 |
0.337 |
|
2020 |
Bang J, Kang Y, Kim N, Seo S, Lee S, Song S, Kang N. Effect of Aging Heat Treatment Conditions on the Mechanical Properties and Microstructure of Base and Weld Metal of Alloy 282 Superalloy Korean Journal of Metals and Materials. 58: 540-549. DOI: 10.3365/Kjmm.2020.58.8.540 |
0.441 |
|
2020 |
Kim Y, Moon B, Kang N, Chun E. Effect of Cladding Conditions on Solidification Cracking Behavior during Dissimilar Cladding of Inconel Alloy FM 52 and 308L Stainless Steel to Carbon Steel: Evaluation of Solidification Brittle Temperature Range by Transverse−Varestraint Test Korean Journal of Metals and Materials. 58: 403-412. DOI: 10.3365/Kjmm.2020.58.6.403 |
0.433 |
|
2020 |
Oh JM, Hong J, Yeom J, Lee SW, Kim E, Kang N, Park CH. Accelerated formation of an ultrafine-grained structure in a two-phase Ti alloy during compression with decreasing temperatures Philosophical Magazine. 100: 1569-1584. DOI: 10.1080/14786435.2020.1728414 |
0.415 |
|
2020 |
Park S, Nam H, Park J, Na Y, Kim H, Kang N. Superior-tensile property of CoCrFeMnNi alloys achieved using friction-stir welding for cryogenic applications Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 788: 139547. DOI: 10.1016/J.Msea.2020.139547 |
0.513 |
|
2020 |
Oh JM, Park CH, Yeom J, Hong J, Kang N, Lee SW. High strength and ductility in low-cost Ti–Al–Fe–Mn alloy exhibiting transformation-induced plasticity Materials Science and Engineering: A. 772: 138813. DOI: 10.1016/J.Msea.2019.138813 |
0.371 |
|
2020 |
Kim Y, Nam H, Lee J, Park C, Moon B, Nam D, Lee SH, Kang N. Hot-cracking resistivity of dissimilar clads using Inconel 52 and 308L stainless steel on carbon steel Journal of Nuclear Materials. 533: 152103. DOI: 10.1016/J.Jnucmat.2020.152103 |
0.387 |
|
2020 |
Choi J, Moon J, Kim BH, Jang JH, Lee T, Hong H, Kim HC, Lee C, Kang NH. Tensile and Charpy impact properties of reduced activation ferritic/martensitic steel with small amounts of Ta and Ti Journal of Nuclear Materials. 528: 151862. DOI: 10.1016/j.jnucmat.2019.151862 |
0.333 |
|
2020 |
Nam H, Park S, Park N, Na Y, Kim H, Yoo S, Moon Y, Kang N. Weldability of cast CoCrFeMnNi high-entropy alloys using various filler metals for cryogenic applications Journal of Alloys and Compounds. 819: 153278. DOI: 10.1016/J.Jallcom.2019.153278 |
0.489 |
|
2020 |
Lee J, Park C, Park H, Kang N. Effective hydrogen diffusion coefficient for CoCrFeMnNi high-entropy alloy and microstructural behaviors after hydrogen permeation International Journal of Hydrogen Energy. 45: 10227-10232. DOI: 10.1016/J.Ijhydene.2020.02.012 |
0.345 |
|
2020 |
Yoon H, Ha H, Kim S, Lee T, Jang JH, Moon J, Kang N. Effects of carbon substitution for nitrogen on the pitting corrosion resistance of type UNS S32205 duplex stainless steel Corrosion Science. 164: 108308. DOI: 10.1016/J.Corsci.2019.108308 |
0.36 |
|
2020 |
Hwang TW, Kang N, VanTyne CJ, Kim Y, Lee T, Moon YH. Microforming of fine metallic rods by the selective laser melting of powder Additive Manufacturing. 101612. DOI: 10.1016/J.Addma.2020.101612 |
0.328 |
|
2020 |
Lee J, Park H, Kim M, Kim H, Suh J, Kang N. Role of Hydrogen and Temperature in Hydrogen Embrittlement of Equimolar CoCrFeMnNi High-entropy Alloy Metals and Materials International. 1-9. DOI: 10.1007/S12540-020-00752-3 |
0.31 |
|
2020 |
Kim N, Ko D, Kang N, Oh IY, VanTyne CJ, Moon YH. Feasibility of using Continuously Cast Round Bloom as a Substitute to Cast Ingot in the Manufacture of Heavy Forgings Steel Research International. 91: 2000079. DOI: 10.1002/Srin.202070091 |
0.342 |
|
2019 |
Lee J, Kim M, Park Y, Park C, Kim C, Kang N. Hydrogen-Induced Cracking of Laser Beam and Gas Metal Arc Welds on API X65 Steel Korean Journal of Metals and Materials. 57: 491-498. DOI: 10.3365/Kjmm.2019.57.8.491 |
0.391 |
|
2019 |
Kim M, Kang Y, Kim N, Lee S, Song S, Kang N. PWHT Cracking Susceptibility in the HAZ of Martensitic 10Cr Steel for A-USC Power Plant Korean Journal of Metals and Materials. 57: 430-437. DOI: 10.3365/Kjmm.2019.57.7.430 |
0.337 |
|
2019 |
Moon B, Lee J, Kang N, Lee T, Jung W, Park C, Cho K. Effect of Carbides Formed in 9Cr-1Mo-V-Nb Weld Metals on Elevated Temperature Tensile Strength Korean Journal of Metals and Materials. 57: 422-429. DOI: 10.3365/Kjmm.2019.57.7.422 |
0.438 |
|
2019 |
Park S, Cho Y, Jee C, Lee J, Seo S, Kang N. Influence of Boron and Manganese on Hot Crack Resistance and Low Temperature Toughness of Flux Cored Arc Weld Metal for High Strength Carbon Steels Korean Journal of Metals and Materials. 57: 28-37. DOI: 10.3365/Kjmm.2019.57.1.28 |
0.437 |
|
2019 |
Won C, Jang JH, Lee C, Lee T, Kang N. Computational Modeling for Coarsening of (Fe,Cr)2B in Borated Stainless Steel Materials Transactions. 60: 369-372. DOI: 10.2320/Matertrans.M2018336 |
0.313 |
|
2019 |
Nam H, Park S, Chun E, Kim H, Na Y, Kang N. Laser dissimilar weldability of cast and rolled CoCrFeMnNi high-entropy alloys for cryogenic applications Science and Technology of Welding and Joining. 25: 127-134. DOI: 10.1080/13621718.2019.1644471 |
0.465 |
|
2019 |
Sim A, Park C, Kang N, Kim Y, Chun E. Effect of laser-assisted nitriding with a high-power diode laser on surface hardening of aluminum-containing martensitic steel Optics & Laser Technology. 116: 305-314. DOI: 10.1016/J.Optlastec.2019.03.040 |
0.384 |
|
2019 |
Nam H, Park C, Moon J, Na Y, Kim H, Kang N. Laser weldability of cast and rolled high-entropy alloys for cryogenic applications Materials Science and Engineering: A. 742: 224-230. DOI: 10.1016/J.Msea.2018.11.009 |
0.51 |
|
2019 |
Won C, Jang JH, Kim S, Moon J, Ha H, Kang J, Lee C, Lee T, Kang N. Effect of annealing on mechanical properties and microstructure evolution of borated stainless steels Journal of Nuclear Materials. 515: 206-214. DOI: 10.1016/J.Jnucmat.2018.12.039 |
0.447 |
|
2019 |
Park S, Park C, Na Y, Kim H, Kang N. Effects of (W, Cr) carbide on grain refinement and mechanical properties for CoCrFeMnNi high entropy alloys Journal of Alloys and Compounds. 770: 222-228. DOI: 10.1016/J.Jallcom.2018.08.115 |
0.47 |
|
2019 |
Park S, Nam H, Na Y, Kim H, Moon Y, Kang N. Effect of Initial Grain Size on Friction Stir Weldability for Rolled and Cast CoCrFeMnNi High-Entropy Alloys Metals and Materials International. 26: 641-649. DOI: 10.1007/S12540-019-00466-1 |
0.487 |
|
2019 |
Choi M, Lee J, Nam H, Kang N, Kim M, Cho D. Tensile and Microstructural Characteristics of Fe-24Mn Steel Welds for Cryogenic Applications Metals and Materials International. 26: 240-247. DOI: 10.1007/S12540-019-00320-4 |
0.496 |
|
2018 |
Kim I, Nam H, Lee M, Nam D, Park Y, Kang N. Effect of Martensite–Austenite Constituent on Low-Temperature Toughness in YS 500 MPa Grade Steel Welds Metals. 8: 638. DOI: 10.3390/MET8080638 |
0.39 |
|
2018 |
Nam T, An E, Kim B, Shin S, Ko W, Park N, Kang N, Jeon J. Effect of Post Weld Heat Treatment on the Microstructure and Mechanical Properties of a Submerged-Arc-Welded 304 Stainless Steel Metals. 8: 26. DOI: 10.3390/MET8010026 |
0.375 |
|
2018 |
Chun E, Lee J, Kang N. Unmixing behaviour in dissimilar laser welds for duplex and austenitic stainless steels Science and Technology of Welding and Joining. 24: 263-275. DOI: 10.1080/13621718.2018.1529372 |
0.392 |
|
2018 |
Oh JM, Kang J, Lee S, Kim S, Kang N, Park CH. Origin of superproperties of Ti-23Nb-1Ta-2Hf-O alloy Materials Letters. 233: 162-165. DOI: 10.1016/J.Matlet.2018.08.151 |
0.366 |
|
2018 |
Byun Y, Lee S, Seo S, Yeom J, Kim SE, Kang N, Hong J. Effects of Cr and Fe Addition on Microstructure and Tensile Properties of Ti–6Al–4V Prepared by Direct Energy Deposition Metals and Materials International. 24: 1213-1220. DOI: 10.1007/S12540-018-0148-X |
0.348 |
|
2018 |
Park C, Kang N, Liu S, Lee J, Chun E, Yoo S. Effect of Prestrain on Hydrogen Embrittlement Susceptibility of EH 36 Steels Using In Situ Slow-Strain-Rate Testing Metals and Materials International. 25: 584-593. DOI: 10.1007/S12540-018-00221-Y |
0.331 |
|
2017 |
Seol W, Lee C, Moon J, Lee T, Jang JH, Kang N. Microstructures and Mechanical Properties of Reduced-activation Ferritic/Martensitic (RAFM) Steels with Ti Substituted for Ta Journal of the Korean Society For Heat Treatment. 30: 53-60. DOI: 10.12656/jksht.2017.30.2.53 |
0.336 |
|
2017 |
Nam H, Park C, Kim C, Kim H, Kang N. Effect of post weld heat treatment on weldability of high entropy alloy welds Science and Technology of Welding and Joining. 23: 420-427. DOI: 10.1080/13621718.2017.1405564 |
0.501 |
|
2017 |
Park M, Lee C, Moon J, Park JY, Lee T, Kang N, Chan Kim H. Effect of microstructural evolution by isothermal aging on the mechanical properties of 9Cr-1WVTa reduced activation ferritic/martensitic steels Journal of Nuclear Materials. 485: 15-22. DOI: 10.1016/J.Jnucmat.2016.12.018 |
0.453 |
|
2017 |
Lee C, Park J, Seol W, Moon J, Lee T, Kang NH, Kim HC. Microstructure and tensile and Charpy impact properties of reduced activation ferritic–martensitic steel with Ti Fusion Engineering and Design. 124: 953-957. DOI: 10.1016/J.FUSENGDES.2017.05.085 |
0.334 |
|
2017 |
Park C, Kang N, Liu S. Effect of grain size on the resistance to hydrogen embrittlement of API 2W Grade 60 steels using in situ slow-strain-rate testing Corrosion Science. 128: 33-41. DOI: 10.1016/J.Corsci.2017.08.032 |
0.38 |
|
2017 |
Vijayan V, Huda N, Murugan SP, Jeong C, Noh SM, Kang N, Park Y. The weldability study of carbon nanotube based 2nd generation primer coated steel for automotive applications Journal of Mechanical Science and Technology. 31: 4405-4410. DOI: 10.1007/S12206-017-0840-7 |
0.379 |
|
2017 |
Ha JW, Seong BS, Woo W, Jeong HW, Choi YS, Kang N. Effects of γ′ Precipitation, Dislocation Density, and Grain Size on Stress-Relaxation Properties of INCONEL X-750 Helical Springs Metallurgical and Materials Transactions A. 48: 3665-3674. DOI: 10.1007/S11661-017-4113-Y |
0.318 |
|
2017 |
Kim I, Lee M, Choi Y, Kang N. Effects of Mo Content on Low-Angle Misorientation Microstructure and Mechanical Properties of YS 550 MPa-Grade Steels for Offshore Structures Steel Research International. 89: 1700278. DOI: 10.1002/Srin.201700278 |
0.456 |
|
2017 |
Lee JS, Lee D, Lee M, Park C, Park YD, Kang N. Effect of Interphase Hardness and Elastic Modulus on Fracture Behavior during Hole Expansion Testing of Hot-Rolled Steels with Low-Temperature Transformation Microstructures Steel Research International. 88: 1700016. DOI: 10.1002/Srin.201700016 |
0.403 |
|
2016 |
Liu S, Kang NH, Yu JH, Kwon HW, Lee JG. Effect of grain boundary modification on the microstructure and magnetic properties of HDDR–treated Nd–Fe–B powders Journal of Magnetics. 21: 51-56. DOI: 10.4283/Jmag.2016.21.1.051 |
0.357 |
|
2016 |
Lee M, Cho K, Kang N. Effect of preheat temperature and microstructure on cold cracking in 600 MPa grade flux cored arc weld metal Journal of Korean Institute of Metals and Materials. 54: 252-260. DOI: 10.3365/Kjmm.2016.54.4.252 |
0.402 |
|
2016 |
Lee M, KanG N, Liu S, Cho K. Effects of inclusion size and acicular ferrite on cold cracking for high-strength steel welds of YS 600 MPa grade Science and Technology of Welding and Joining. 21: 711-719. DOI: 10.1080/13621718.2016.1178833 |
0.367 |
|
2015 |
Ha JW, Seong BS, Jeong HW, Choi YS, Kang N. Effects of the aging temperature and stress relaxation conditions on γ' precipitation in Inconel X-750 Journal of Nuclear Materials. 457: 362-368. DOI: 10.1016/J.Jnucmat.2014.11.093 |
0.318 |
|
2015 |
Lee M, Cho K, Kim Y, Kang N. Effect of martensite on cold cracking in 600-MPa grade flux-cored arc weld metals using the Y-groove test Welding in the World. 59: 647-654. DOI: 10.1007/S40194-015-0240-5 |
0.437 |
|
2014 |
Lee M, Kang N. The Effects of Microstructure on Cold Crack in High-Strength Weld Metals Journal of the Korean Welding and Joining Society. 32: 22-27. DOI: 10.5781/JWJ.2014.32.1.22 |
0.317 |
|
2014 |
Lee J, Lee M, Do H, Kim S, Kang N. Effect of the Tempered Martensite Matrix and Granular Bainite on Stretch-Flangeability for 980 MPa Hot-Rolled Steel Korean Journal of Metals and Materials. 52: 113-121. DOI: 10.3365/Kjmm.2014.52.2.113 |
0.465 |
|
2014 |
Lee KS, Jo YM, Kang N, Lee Y. Influence of annealing on the interface-correlated mechanical properties of a Ti/STS clad sheet Korean Journal of Metals and Materials. 52: 881-891. DOI: 10.3365/Kjmm.2014.52.11.881 |
0.305 |
|
2014 |
Ha JW, Seong BS, Jeong HW, Yoo YS, Choi YS, Kang N. Effect of cold drawing ratio on γ′ precipitation in Inconel X-750 Materials Characterization. 96: 1-5. DOI: 10.1016/J.Matchar.2014.07.016 |
0.337 |
|
2014 |
Kim B, Lee C, Lee D, Kang N. Effect of Sb addition on Bi–2.6Ag–0.1Cu solders for high-temperature applications Journal of Alloys and Compounds. 592: 207-212. DOI: 10.1016/J.Jallcom.2013.12.252 |
0.34 |
|
2013 |
Kwon H, Park C, Hong I, Kang N. Effects of High Current and Welding Wire Diameter on the Magnesium Vaporization and Mechanical Properties of Al5083 Arc Welds Journal of the Korean Welding and Joining Society. 31: 84-89. DOI: 10.5781/KWJS.2013.31.6.84 |
0.327 |
|
2013 |
Joon Chun E, Do H, Kim S, Nam D, Park Y, Kang N. Effect of nanocarbides and interphase hardness deviation on stretch-flangeability in 998 MPa hot-rolled steels Materials Chemistry and Physics. 140: 307-315. DOI: 10.1016/J.Matchemphys.2013.03.041 |
0.426 |
|
2012 |
Lee T, Park C, Kang N, Kim M. Effect of Welding Condition and Roller on Weldability of Al Coated Steel Sheet using Plasma Arc Welding Journal of the Korean Welding and Joining Society. 30: 54-58. DOI: 10.5781/KWJS.2012.30.2.158 |
0.328 |
|
2012 |
Chun E, Lee J, Do H, Kim S, Park Y, Kang N. Microstructure and Mechanical Properties of High Strength and Stretch-Flangeability Hot-Rolled Steels Korean Journal of Materials Research. 22: 16-23. DOI: 10.3740/Mrsk.2012.22.1.016 |
0.458 |
|
2012 |
Kang N, Chun E, Lee J, Do H, Kim S, CHoi Y, Park Y. Effects of Coiling Temperature and Carbides Behavior on Stretch-flangeability for 980 MPa Hot-rolled Steels Korean Journal of Metals and Materials. 50: 487-493. DOI: 10.3365/Kjmm.2012.50.7.487 |
0.441 |
|
2012 |
Kang HJ, Lee TW, Yoon BH, Park SJ, Chang WS, Cho KM, Kang N. Microstructural effects on hydrogen delayed fracture of 600 MPa and 800 MPa grade deposited weld metal Journal of Korean Institute of Metals and Materials. 50: 52-58. DOI: 10.3365/Kjmm.2012.50.1.052 |
0.448 |
|
2012 |
Kim C, Kang M, Kang N. Solidification crack and morphology for laser weave welding of Al 5J32 alloy Science and Technology of Welding and Joining. 18: 57-61. DOI: 10.1179/1362171812Y.0000000073 |
0.457 |
|
2012 |
Kang HJ, Yoo JS, Park JT, Ahn ST, Kang N, Cho K. Effect of nano-carbide formation on hydrogen-delayed fracture for quenching and tempering steels during high-frequency induction heat treatment Materials Science and Engineering: A. 543: 6-11. DOI: 10.1016/J.Msea.2012.02.008 |
0.446 |
|
2012 |
Lee S, Kim J, Kang N, Cho K. Effects of furnace atmosphere on selective oxidation behaviour of Si-added transformation-induced plasticity steels Metals and Materials International. 18: 951-956. DOI: 10.1007/S12540-012-6006-3 |
0.303 |
|
2012 |
Byun SH, Kang N, Lee TH, Ahn SK, Lee HW, Chang WS, Cho KM. Kinetics of Cr/Mo-rich precipitates formation for 25Cr-6.9Ni-3.8Mo-0.3N super duplex stainless steel Metals and Materials International. 18: 201-207. DOI: 10.1007/S12540-012-2001-Y |
0.352 |
|
2011 |
Kim W, Kang N, Kim S, Do H, Nam D, Cho K. Effect of Ti and C Contents on Prior Austenite Grain Size in Ti Added Steels Korean Journal of Materials Research. 21: 187-191. DOI: 10.3740/Mrsk.2011.21.4.187 |
0.43 |
|
2011 |
Lee K, Lee D, Kim S, Yoon B, Kang H, Kang N, Cho K. Effects of Welding Condition on Microstructure and Mechanical Property of Energy Resistance Welding Alloy Steel Pipes Korean Journal of Materials Research. 21: 50-55. DOI: 10.3740/Mrsk.2011.21.1.050 |
0.511 |
|
2011 |
Lee J, Kim D, Nam D, Kang NH, Kim S, Yu J, Rhym Y, Park Y. Assessment of Resistance Spot Weldability of Dissimilar Joints of Austenitic Stainless Steels/IF Steels and Ferritic Stainless Steels/IF Steels Korean Journal of Metals and Materials. 49: 64-72. DOI: 10.3365/KJMM.2011.49.1.064 |
0.333 |
|
2011 |
Kim MH, Kim HJ, Han JH, Lee JM, Kim YD, Kang NH, Kang MJ, Kim CH. Influence of backing materials towards the fatigue strength of butt-welded joints Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 225: 1798-1807. DOI: 10.1177/0954406211403570 |
0.36 |
|
2011 |
Ryoo DY, Kang N, Kang CY. Effect of Ni content on the tensile properties and strain-induced martensite transformation for 304 stainless steel Materials Science and Engineering A. 528: 2277-2281. DOI: 10.1016/J.Msea.2010.12.022 |
0.335 |
|
2011 |
Lee JB, Kang N, Park JT, Ahn S, Park Y, Choi I, Kim K, Cho K. Kinetics of carbide formation for quenching and tempering steels during high-frequency induction heat treatment Materials Chemistry and Physics. 129: 365-370. DOI: 10.1016/J.Matchemphys.2011.04.026 |
0.446 |
|
2009 |
Lee J, Nam D, Kang N, Kim Y, Oh W, Park Y. Resistance Spot Welding of Dissimilar Materials of Austenitic Stainless Steels and IF (Interstitial Free) Steels Korean Journal of Materials Research. 19: 369-375. DOI: 10.3740/Mrsk.2009.19.7.369 |
0.496 |
|
2009 |
Byun SH, Oh CS, Nam DG, Kim YS, Kang N, Cho KM. Effects of stability and volume fraction of retained austenite on the tensile properties for Q&P and AM steels Korean Journal of Materials Research. 19: 305-312. DOI: 10.3740/Mrsk.2009.19.6.305 |
0.393 |
|
2009 |
Jin J, Park Y, Nam D, Lee S, Kim S, Kang N, Cho K. Comparative Analysis of Strengthening with Respect to Microstructural Evolution for 0.2 Carbon DP, TRIP, Q&P Steels Korean Journal of Materials Research. 19: 293-299. DOI: 10.3740/Mrsk.2009.19.6.293 |
0.325 |
|
2009 |
Kang N, Lee Y, Byun S, Kim K, Kim K, Chung J, Cho K. Quantitative analysis of microstructural and mechanical behavior for Fe–0.1C–(V, Nb) steels as a function of the final rolling temperature Materials Science and Engineering: A. 499: 157-161. DOI: 10.1016/J.Msea.2007.11.145 |
0.485 |
|
2009 |
Kang N, Na HS, Kim SJ, Kang CY. Alloy design of Zn–Al–Cu solder for ultra high temperatures Journal of Alloys and Compounds. 467: 246-250. DOI: 10.1016/J.Jallcom.2007.12.048 |
0.39 |
|
2009 |
Maroef I, Park YD, Nam DG, Kim YS, Cho Y, Kang N, Rhym YM, Yu JH, Olson DL. Study on the initiation of a thermite reaction in aluminum coated steel with a high-velocity impact Metals and Materials International. 15: 851-856. DOI: 10.1007/S12540-009-0851-0 |
0.386 |
|
2009 |
Nam D, Kang N, Kim Y, Lee H. Microstructure of chromium nitride layer on stainless steel for polymer electrolyte membrane fuel cell separator Metals and Materials International. 15: 273-278. DOI: 10.1007/S12540-009-0273-7 |
0.35 |
|
2008 |
Kang N, Park Y, Cho K, Singh J, Kulkarni A. Behavior of Weld Pool Shape and Weld Surface Deformation as a Function of Spot-GTA Welding Position for 304 Stainless Steel Journal of the Korean Welding and Joining Society. 26: 62-68. DOI: 10.5781/KWJS.2008.26.2.062 |
0.572 |
|
2008 |
Lee JH, Yu AM, Kim JH, Kim MS, Kang N. Reaction properties and interfacial intermetallics for Sn-xAg-0.5Cu solders as a function of Ag content Metals and Materials International. 14: 649-654. DOI: 10.3365/Met.Mat.2008.10.649 |
0.316 |
|
2007 |
Park Y, Kang N, Malene SH, Olson DL. Effect of exothermic additions on heat generation and Arc process efficiency in Flux-Cored Arc welding Metals and Materials International. 13: 501-509. DOI: 10.1007/Bf03027910 |
0.395 |
|
2004 |
Kang N, Singh J, Kulkarni AK. Gravitational effects on the weld pool shape and microstructural evolution during gas tungsten arc and laser beam welding of 304 stainless steel and Al-4 wt% Cu alloy. Annals of the New York Academy of Sciences. 1027: 529-49. PMID 15644379 DOI: 10.1196/Annals.1324.041 |
0.639 |
|
2003 |
Kang N, Chae H, Kim J, Choi J, Kim J. Abrasion Wear Behavior of Recycled Tungsten Carbide Reinforced Metal Matrix Composite Korean Journal of Materials Research. 13: 850-854. DOI: 10.3740/Mrsk.2003.13.12.850 |
0.398 |
|
2003 |
강남현, 채현병, 김준기, 최종하, 김정한, Kang N, Chae H, Kim J, Choi J, Kim J. Effects of Mn and C Addition on the Wear Resistance for the Recycled WC Dispersed Fe-base Hardfacing Weld Korean Journal of Materials Research. 13: 839-845. DOI: 10.3740/Mrsk.2003.13.12.839 |
0.467 |
|
2003 |
Kang N, Singh J, Kulkarni AK. Gravitational Effects on the Gas Tungsten Arc Welds of 304 Stainless Steels Materials and Manufacturing Processes. 18: 549-561. DOI: 10.1081/Amp-120022496 |
0.616 |
|
2003 |
Kang N, Mahank TA, Kulkarni AK, Singh J. Effects of gravitational orientation on surface deformation and weld pool geometry during gas tungsten arc welding Materials and Manufacturing Processes. 18: 169-180. DOI: 10.1081/Amp-120018903 |
0.607 |
|
2003 |
Kang N, Singh J, Kulkarni AK. Journal of Materials Science. 38: 3579-3589. DOI: 10.1023/A:1025617128625 |
0.613 |
|
Show low-probability matches. |