Karen A. Thole - Publications

Affiliations: 
1994-1999 University of Wisconsin, Madison, Madison, WI 
 1999-2006 Mechanical Engineering Virginia Polytechnic Institute and State University, Blacksburg, VA, United States 
 2006- Mechanical and Nuclear Engineering Pennsylvania State University, State College, PA, United States 
Area:
Mechanical Engineering, Aerospace Engineering, Fluid and Plasma Physics
Website:
http://www.mne.psu.edu/department/directory-detail.aspx?LandOn=Gen&q=kat18

186 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2020 Berdanier RA, DeShong E, Thole KA, Robak C. Evaluating the Effects of Transient Purge Flow on Stator-Rotor Seal Performance Journal of Turbomachinery-Transactions of the Asme. 1-55. DOI: 10.1115/1.4048023  0.68
2020 Monge-Concepción I, Berdanier RA, Barringer MD, Thole KA, Robak C. Evaluating the Effect of Vane Trailing Edge Flow on Turbine Rim Sealing Journal of Turbomachinery-Transactions of the Asme. 142. DOI: 10.1115/1.4047611  1
2020 Snyder JC, Thole KA. Tailoring Surface Roughness Using Additive Manufacturing to Improve Internal Cooling Journal of Turbomachinery-Transactions of the Asme. 142. DOI: 10.1115/1.4047380  1
2020 Snyder JC, Thole KA. Understanding Laser Powder Bed Fusion Surface Roughness Journal of Manufacturing Science and Engineering-Transactions of the Asme. 142. DOI: 10.1115/1.4046504  1
2020 Snyder JC, Thole KA. Performance of Public Film Cooling Geometries Produced Through Additive Manufacturing Journal of Turbomachinery-Transactions of the Asme. 142. DOI: 10.1115/1.4046488  1
2020 Snyder JC, Thole KA. Effect of Additive Manufacturing Process Parameters on Turbine Cooling Journal of Turbomachinery-Transactions of the Asme. 142. DOI: 10.1115/1.4046459  1
2020 Siroka S, Berdanier RA, Thole KA, Chana K, Haldeman CW, Anthony RJ. Comparison of Thin Film Heat Flux Gauge Technologies Emphasizing Continuous-Duration Operation Journal of Turbomachinery-Transactions of the Asme. 142: 91001. DOI: 10.1115/1.4045991  0.68
2019 Berdanier RA, Monge-Concepción I, Knisely BF, Barringer MD, Thole KA, Grover EA. Scaling Sealing Effectiveness in a Stator–Rotor Cavity for Differing Blade Spans Journal of Turbomachinery-Transactions of the Asme. 141: 51007. DOI: 10.1115/1.4042423  1
2018 Kirsch KL, Thole KA. Numerical Optimization, Characterization, and Experimental Investigation of Additively Manufactured Communicating Microchannels Journal of Turbomachinery-Transactions of the Asme. 140: 111003. DOI: 10.1115/1.4041494  1
2018 Stimpson CK, Snyder JC, Thole KA, Mongillo D. Effects of Coolant Feed Direction on Additively Manufactured Film Cooling Holes Journal of Turbomachinery-Transactions of the Asme. 140: 111001. DOI: 10.1115/1.4041374  1
2018 Shrager AC, Thole KA, Mongillo D. Effects of Effusion Cooling Pattern Near the Dilution Hole for a Double-Walled Combustor Liner: Part 2 — Flowfield Measurements Journal of Engineering For Gas Turbines and Power-Transactions of the Asme. 141: 11023. DOI: 10.1115/1.4041153  0.92
2018 Shrager AC, Thole KA, Mongillo D. Effects of Effusion Cooling Pattern Near the Dilution Hole for a Double-Walled Combustor Liner: Part 1 — Overall Effectiveness Measurements Journal of Engineering For Gas Turbines and Power-Transactions of the Asme. 141: 11022. DOI: 10.1115/1.4041148  0.92
2018 Stimpson CK, Snyder JC, Thole KA, Mongillo D. Effectiveness Measurements of Additively Manufactured Film Cooling Holes Journal of Turbomachinery-Transactions of the Asme. 140: 11009. DOI: 10.1115/1.4038182  1
2018 Kirsch KL, Thole KA. Experimental Investigation of Numerically Optimized Wavy Microchannels Created Through Additive Manufacturing Journal of Turbomachinery-Transactions of the Asme. 140: 21002. DOI: 10.1115/1.4038180  1
2018 Ferster KK, Kirsch KL, Thole KA. Effects of Geometry, Spacing, and Number of Pin Fins in Additively Manufactured Microchannel Pin Fin Arrays Journal of Turbomachinery-Transactions of the Asme. 140: 11007. DOI: 10.1115/1.4038179  1
2018 Kirsch KL, Thole KA. Isolating the effects of surface roughness versus wall shape in numerically optimized, additively manufactured micro cooling channels Experimental Thermal and Fluid Science. 98: 227-238. DOI: 10.1016/J.Expthermflusci.2018.05.030  1
2017 Clark K, Barringer MD, Johnson DK, Thole KA, Grover E, Robak C. Effects of Purge Flow Configuration on Sealing Effectiveness in a Rotor–Stator Cavity Journal of Engineering For Gas Turbines and Power-Transactions of the Asme. 140: 112502. DOI: 10.1115/1.4040308  1
2017 Kirsch KL, Thole KA. Heat transfer and pressure loss measurements in additively manufactured wavy microchannels Journal of Turbomachinery. 139. DOI: 10.1115/1.4034342  1
2017 Kirsch KL, Thole KA. Pressure loss and heat transfer performance for additively and conventionally manufactured pin fin arrays International Journal of Heat and Mass Transfer. 108: 2502-2513. DOI: 10.1016/J.Ijheatmasstransfer.2017.01.095  1
2016 Schroeder RP, Thole KA. Effect of in-hole roughness on film cooling from a shaped hole Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/1.4034847  1
2016 Schroeder RP, Thole KA. Thermal field measurements for a shaped hole at low and high freestream turbulence intensity Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/1.4034798  1
2016 Stimpson CK, Snyder JC, Thole KA, Mongillo D. Scaling roughness effects on pressure loss and heat transfer of additively manufactured channels Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/1.4034555  1
2016 Clark K, Barringer M, Thole KA, Clum C, Hiester P, Memory C, Robak C. Effects of Purge Jet Momentum on Sealing Effectiveness Journal of Engineering For Gas Turbines and Power-Transactions of the Asme. 139: 10. DOI: 10.1115/1.4034545  0.68
2016 Schroeder RP, Thole KA. Effect of high freestream turbulence on flowfields of shaped film cooling holes Journal of Turbomachinery. 138. DOI: 10.1115/1.4032736  1
2016 Snyder JC, Stimpson CK, Thole KA, Mongillo D. Build direction effects on additively manufactured channels Journal of Turbomachinery. 138. DOI: 10.1115/1.4032168  1
2016 Stimpson CK, Snyder JC, Thole KA, Mongillo D. Roughness effects on flow and heat transfer for additively manufactured channels Journal of Turbomachinery. 138. DOI: 10.1115/1.4032167  1
2016 Lynch SP, Thole KA. Comparison of the three-dimensional boundary layer on flat versus contoured turbine endwalls Journal of Turbomachinery. 138. DOI: 10.1115/1.4032165  1
2016 Mensch A, Thole KA. Overall effectiveness and flowfield measurements for an endwall with nonaxisymmetric contouring Journal of Turbomachinery. 138. DOI: 10.1115/1.4031962  1
2016 Mensch AE, Thole KA. Effects of non-axisymmetric endwall contouring and film cooling on the passage flowfield in a linear turbine cascade Experiments in Fluids. 57: 1-16. DOI: 10.1007/S00348-015-2093-5  1
2016 Haas C, Alley M, Garner JK, Thole KA. Engineering ambassadors network: Progress in year 3 on creating a national network of ambassadors Asee Annual Conference and Exposition, Conference Proceedings. 2016.  1
2015 Stimpson CK, Snyder JC, Thole KA, Mongillo D. Roughness effects on flow and heat transfer for additively manufactured channels Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/GT2015-43940  1
2015 Snyder JC, Stimpson CK, Thole KA, Mongillo D. Build direction effects on additively manufactured channels Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/GT2015-43935  1
2015 Mensch A, Thole KA. Overall effectiveness and flowfield measurements for an endwall with Non-Axisymmetric contouring Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/GT2015-42706  1
2015 Lynch SP, Thole KA. Heat transfer and film cooling on a contoured blade endwall with platform gap leakage Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/1.4035202  1
2015 Snyder JC, Stimpson CK, Thole KA, Mongillo DJ. Build Direction Effects on Microchannel Tolerance and Surface Roughness Journal of Mechanical Design, Transactions of the Asme. 137. DOI: 10.1115/1.4031071  1
2015 Whitfield CA, Schroeder RP, Thole KA, Lewis SD. Blockage effects from simulated thermal barrier coatings for cylindrical and shaped cooling holes Journal of Turbomachinery. 137. DOI: 10.1115/1.4029879  1
2015 Kirsch KL, Thole KA. Heat transfer measurements of oblong pins Journal of Turbomachinery. 137. DOI: 10.1115/1.4029124  1
2015 Mensch A, Thole KA. Conjugate heat transfer analysis of the effects of impingement channel height for a turbine blade endwall International Journal of Heat and Mass Transfer. 82: 66-77. DOI: 10.1016/J.Ijheatmasstransfer.2014.10.076  1
2014 Schroeder RP, Thole KA. Adiabatic effectiveness measurements for a baseline shaped film cooling hole Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/GT2014-25992  1
2014 Barringer M, Coward A, Clark K, Thole KA, Schmitz J, Wagner J, Alvin MA, Burke P, Dennis R. The design of a steady aero thermal research turbine (START) for studying secondary flow leakages and airfoil heat transfer Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/GT2014-25570  1
2014 Kirsch KL, Ostanek JK, Thole KA, Kaufman E. Row removal heat transfer study for pin fin arrays Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/GT2014-25348  1
2014 Mensch A, Thole KA. Simulations of multiphase particle deposition on a gas turbine endwall with impingement and film cooling Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 8. DOI: 10.1115/1.4031177  1
2014 Mensch A, Thole KA, Craven BA. Conjugate heat transfer measurements and predictions of a blade endwall with a thermal barrier coating Proceedings of the Asme Turbo Expo. 5. DOI: 10.1115/1.4028233  1
2014 Mensch A, Thole KA. Overall effectiveness of a blade endwall with jet impingement and film cooling Journal of Engineering For Gas Turbines and Power. 136. DOI: 10.1115/1.4025835  1
2014 Alley M, Haas C, Thole KA, Marshall M, Garner JK. Progress on the engineering ambassador network: A professional development group with an outreach mission Asee Annual Conference and Exposition, Conference Proceedings 1
2013 Ostanek JK, Thole KA. Effects of non-uniform streamwise spacing in low aspect ratio pin fin arrays Proceedings of the Asme Turbo Expo. 3. DOI: 10.1115/GT2013-95889  1
2013 Hargather MJ, Thole KA. Characterization of flow through porous metals Proceedings of the Asme Turbo Expo. 3. DOI: 10.1115/GT2013-94945  1
2013 Lynch SP, Thole KA, Kohli A, Lehane C, Praisner T. Aerodynamic loss for a turbine blade with endwall leakage features and contouring Proceedings of the Asme Turbo Expo. 6. DOI: 10.1115/GT2013-94943  1
2013 Lynch SP, Thole KA, Kohli A, Lehane C, Praisner T. Endwall heat transfer for a turbine blade with an upstream cavity and rim seal leakage Proceedings of the Asme Turbo Expo. 3. DOI: 10.1115/GT2013-94942  1
2013 Eberly MK, Thole KA. Time-resolved film-cooling flows at high and low density ratios Proceedings of the Asme Turbo Expo. 3. DOI: 10.1115/1.4025574  1
2013 Barringer M, Thole KA, Krishnan V, Landrum E. Manufacturing influences on pressure losses of channel fed holes Proceedings of the Asme Turbo Expo. 3. DOI: 10.1115/1.4025226  1
2013 Kirsch KL, Ostanek JK, Thole KA. Comparison of pin surface heat transfer in arrays of oblong and cylindrical pin fins Proceedings of the Asme Turbo Expo. 3. DOI: 10.1115/1.4025213  1
2013 Barringer MD, Thole KA, Breneman DL, Tham KM, Laurello V. Effects of centrifugal forces on particle deposition for a representative seal pin between two blades Journal of Engineering For Gas Turbines and Power. 135. DOI: 10.1115/1.4007751  1
2013 Lawson SA, Lynch SP, Thole KA. Simulations of multiphase particle deposition on a nonaxisymmetric contoured endwall with film-cooling Journal of Turbomachinery. 135. DOI: 10.1115/1.4007598  1
2013 Musgrove GO, Thole KA, Grover E, Barker J. Performance measurements of a unique louver particle separator for gas turbine engines Journal of Engineering For Gas Turbines and Power. 135. DOI: 10.1115/1.4007568  1
2013 Thole KA, Zappe SE, Marshall M, Alley M, Engel RS. Engineering ambassador network: Dissemination through an inaugural nationalworkshop Asee Annual Conference and Exposition, Conference Proceedings 1
2013 Hatzell JG, Marshall M, Alley M, Thole KA, Haas C, Engel RS, Garner JK. Engineering ambassador network: Professional development programs with an outreach focus Asee Annual Conference and Exposition, Conference Proceedings 1
2012 Lawson SA, Lynch SP, Thole KA. Simulations of multi-phase particle deposition on a non-axisymmetric contoured endwall with film-cooling Proceedings of the Asme Turbo Expo. 4: 891-902. DOI: 10.1115/GT2012-68174  1
2012 Ostanek JK, Thole KA. Effects of varying streamwise and spanwise spacing in pin-fin arrays Proceedings of the Asme Turbo Expo. 4: 45-57. DOI: 10.1115/GT2012-68127  1
2012 Thrift AA, Thole KA, Hada S. Impact of the combustor-turbine interface slot orientation on the durability of a nozzle guide vane endwall Proceedings of the Asme Turbo Expo. 4: 31-43. DOI: 10.1115/1.4007602  1
2012 Thrift AA, Thole KA, Hada S. Effects of orientation and position of the combustor-turbine interface on the cooling of a vane endwall Journal of Turbomachinery. 134. DOI: 10.1115/1.4004817  1
2012 Lawson SA, Thole KA, Okita Y, Nakamata C. Simulations of Multiphase Particle Deposition on a Showerhead With Staggered Film-Cooling Holes Journal of Turbomachinery. 134. DOI: 10.1115/1.4004757  1
2012 Lawson SA, Thole KA. Simulations of Multiphase Particle Deposition on Endwall Film-Cooling Holes in Transverse Trenches Journal of Turbomachinery. 134. DOI: 10.1115/1.4004756  1
2012 Ostanek JK, Thole KA. Flowfield Measurements in a Single Row of Low Aspect Ratio Pin Fins Journal of Turbomachinery. 134. DOI: 10.1115/1.4004755  1
2012 Lawson SA, Thole KA. Simulations of Multiphase Particle Deposition on Endwall Film-Cooling Journal of Turbomachinery-Transactions of the Asme. 134: 11003. DOI: 10.1115/1.4002962  1
2012 Thrift AA, Thole KA. Influence of flow injection angle on a leading-edge horseshoe vortex International Journal of Heat and Mass Transfer. 55: 4651-4664. DOI: 10.1016/J.Ijheatmasstransfer.2012.04.024  1
2012 Ostanek JK, Thole KA. Effect of streamwise spacing on periodic and random unsteadiness in a bundle of short cylinders confined in a channel Experiments in Fluids. 53: 1779-1796. DOI: 10.1007/S00348-012-1394-1  1
2012 Ostanek JK, Thole KA. Wake development in staggered short cylinder arrays within a channel Experiments in Fluids. 53: 673-697. DOI: 10.1007/S00348-012-1313-5  1
2011 Ostanek JK, Thole KA. Flowfield measurements in a single row of low aspect ratio pin-fins Proceedings of the Asme Turbo Expo. 5: 1293-1304. DOI: 10.1115/GT2011-45757  1
2011 Lawson SA, Thole KA, Okita Y, Nakamata C. Simulations of multi-phase particle deposition on a showerhead with staggered film-cooling holes Proceedings of the Asme Turbo Expo. 5: 91-103. DOI: 10.1115/GT2011-45191  1
2011 Lawson SA, Thole KA. Simulations of multi-phase particle deposition on endwall film-cooling holes in transverse trenches Proceedings of the Asme Turbo Expo. 5: 79-90. DOI: 10.1115/GT2011-45190  1
2011 Weaver SA, Barringer MD, Thole KA. Microchannels with manufacturing roughness levels Journal of Turbomachinery. 133. DOI: 10.1115/1.4002991  1
2011 Thrift AA, Thole KA, Hada S. Effects of an axisymmetric contoured endwall on a nozzle guide vane: Adiabatic effectiveness measurements Journal of Turbomachinery. 133. DOI: 10.1115/1.4002965  1
2011 Lynch SP, Thole KA, Kohli A, Lehane C. Computational predictions of heat transfer and film-cooling for a turbine blade with nonaxisymmetric endwall contouring Journal of Turbomachinery. 133. DOI: 10.1115/1.4002951  1
2011 Lynch SP, Thole KA. The effect of the combustor-turbine slot and midpassage gap on vane endwall heat transfer Journal of Turbomachinery. 133. DOI: 10.1115/1.4002950  1
2011 Colban WF, Thole KA, Bogard D. A film-cooling correlation for shaped holes on a flat-plate surface Journal of Turbomachinery. 133. DOI: 10.1115/1.4002064  1
2011 Carullo JS, Nasir S, Cress RD, Ng WF, Thole KA, Zhang LJ, Moon HK. The effects of freestream turbulence, turbulence length scale, and exit reynolds number on turbine blade heat transfer in a transonic cascade Journal of Turbomachinery. 133. DOI: 10.1115/1.4001366  1
2011 Hada S, Thole KA. Computational study of a midpassage gap and upstream slot on vane endwall film-cooling Journal of Turbomachinery. 133. DOI: 10.1115/1.4001135  1
2011 Lawson SA, Thole KA. Effects of simulated particle deposition on film cooling Journal of Turbomachinery. 133. DOI: 10.1115/1.4000571  1
2011 Lynch SP, Sundaram N, Thole KA, Kohli A, Lehane C. Heat transfer for a turbine blade with nonaxisymmetric endwall contouring Journal of Turbomachinery. 133. DOI: 10.1115/1.4000542  1
2011 Lyall ME, Thrift AA, Thole KA, Kohli A. Heat transfer from low aspect ratio pin fins Journal of Turbomachinery. 133. DOI: 10.1115/1.2812951  1
2011 Cardwell ND, Vlachos PP, Thole KA. A multi-parametric particle-pairing algorithm for particle tracking in single and multiphase flows Measurement Science and Technology. 22. DOI: 10.1088/0957-0233/22/10/105406  1
2011 Lawson SA, Thrift AA, Thole KA, Kohli A. Heat transfer from multiple row arrays of low aspect ratio pin fins International Journal of Heat and Mass Transfer. 54: 4099-4109. DOI: 10.1016/J.Ijheatmasstransfer.2011.04.001  1
2011 Cardwell ND, Vlachos PP, Thole KA. Developing and fully developed turbulent flow in ribbed channels Experiments in Fluids. 50: 1357-1371. DOI: 10.1007/S00348-010-0993-Y  1
2011 Kirkpatrick AT, Danielson S, Warrington RO, Smith RN, Thole KA, Wepfer WJ, Perry T. Vision 2030 - Creating the future of mechanical engineering education Asee Annual Conference and Exposition, Conference Proceedings 1
2010 Lynch SP, Thole KA. The effect of the combustor-turbine slot and mid-passage gap on vane endwall heat transfer Asme International Mechanical Engineering Congress and Exposition, Proceedings. 9: 2167-2178. DOI: 10.1115/IMECE2009-12847  1
2010 Lynch SP, Thole KA, Kohli A, Lehane C. Computational predictions of heat transfer and film-cooling for a turbine blade with non-axisymmetric endwall contouring Proceedings of the Asme Turbo Expo. 4: 1641-1653. DOI: 10.1115/GT2010-22984  1
2010 Weaver SA, Barringer MD, Thole KA. Micro channels with manufacturing roughness levels Proceedings of the Asme Turbo Expo. 4: 413-422. DOI: 10.1115/GT2010-22976  1
2010 Thrift AA, Thole KA, Hada S. Effects of an axisymmetric contoured endwall on a nozzle guide vane: Adiabatic effectivness measurements Proceedings of the Asme Turbo Expo. 4: 1617-1627. DOI: 10.1115/GT2010-22968  1
2010 Thrift AA, Thole KA, Hada S. Effects of an axisymmetric contoured endwall on a nozzle guide vane: Convective heat transfer measurements Proceedings of the Asme Turbo Expo. 4: 1629-1640. DOI: 10.1115/1.4002966  1
2010 Thrift AA, Brumbaugh SJ, Thole KA, Kohli A. A methodology to measure aerodynamic forces on cylinders in channel flow Journal of Fluids Engineering, Transactions of the Asme. 132. DOI: 10.1115/1.4002198  1
2010 Cardwell ND, Vlachos PP, Thole KA. A method for identifying and visualizing foreign particle motion using time-resolved particle tracking velocimetry Journal of Turbomachinery. 133. DOI: 10.1115/1.4001187  1
2010 Land CC, Joe C, Thole KA. Considerations of a double-wall cooling design to reduce sand blockage Journal of Turbomachinery. 132. DOI: 10.1115/1.3153308  1
2010 Ostanek JK, Prausa J, Van Suetendael A, Thole KA. Establishing a methodology for resolving convective heat transfer from complex geometries Journal of Turbomachinery. 132. DOI: 10.1115/1.3144989  1
2009 Cardwell ND, Vlachos PP, Thole KA. A method for identifying and visualizing foreign particle motion using time resolved particle tracking velocimetry Proceedings of the Asme Turbo Expo. 3: 979-990. DOI: 10.1115/GT2009-60273  1
2009 Musgrove GO, Barringer MD, Thole KA, Grover E, Barker J. Computational design of a louver particle separator for gas turbine engines Proceedings of the Asme Turbo Expo. 3: 1313-1323. DOI: 10.1115/GT2009-60199  1
2009 Lynch SP, Sundaram N, Thole KA, Kohli A, Lehane C. Heat transfer for a turbine blade with non-axisymmetric endwall contouring Proceedings of the Asme Turbo Expo. 3: 887-898. DOI: 10.1115/GT2009-60185  1
2009 Knost DG, Thole KA, Duggleby A. Evaluating a three-dimensional slot design for the combustor-turbine interface Proceedings of the Asme Turbo Expo. 3: 873-885. DOI: 10.1115/GT2009-60168  1
2009 Lawson SA, Thole KA. The effects of simulated particle deposition on film cooling Proceedings of the Asme Turbo Expo. 3: 41-51. DOI: 10.1115/GT2009-59109  1
2009 Cardwell ND, Vlachos PP, Thole KA. Developing and fully developed turbulent flow in ribbed channels 2008 Proceedings of the Asme Fluids Engineering Division Summer Conference, Fedsm 2008. 1: 379-388. DOI: 10.1115/FEDSM2008-55190  1
2009 Nasir S, Carullo JS, Ng WF, Thole KA, Wu H, Zhang LJ, Moon HK. Effects of large scale high freestream turbulence and exit reynolds number on turbine vane heat transfer in a transonic cascade Journal of Turbomachinery. 131. DOI: 10.1115/1.2952381  1
2009 Barringer MD, Thole KA, Polanka MD, Clark JP, Koch PJ. Migration of combustor exit profiles through high pressure turbine vanes Journal of Turbomachinery. 131. DOI: 10.1115/1.2950076  1
2009 Barringer MD, Thole KA, Polanka MD. An experimental study of combustor exit profile shapes on endwall heat transfer in high pressure turbine vanes Journal of Turbomachinery. 131. DOI: 10.1115/1.2950072  1
2009 Barringer MD, Thole KA, Polanka MD. Effects of combustor exit profiles on vane aerodynamic loading and heat transfer in a high pressure turbine Journal of Turbomachinery. 131. DOI: 10.1115/1.2950051  1
2008 Nasir S, Carullo JS, Ng WF, Thole KA, Wu H, Zhang LJ, Moon HK. Effects of large scale high freestream turbulence, and exit reynolds number on turbine vane heat transfer in a transonic cascade Asme International Mechanical Engineering Congress and Exposition, Proceedings. 8: 751-764. DOI: 10.1115/IMECE2007-44098  1
2008 Cardwell ND, Thole KA, Burd SW. Investigation of sand blocking within impingement and film-cooling holes Proceedings of the Asme Turbo Expo. 4: 1147-1159. DOI: 10.1115/1.3106702  1
2008 Sundaram N, Thole KA. Film-cooling flowfields with trenched holes on an endwall Proceedings of the Asme Turbo Expo. 4: 121-132. DOI: 10.1115/1.3068316  1
2008 Lynch SP, Thole KA. The effect of combustor-turbine interface gap leakage on the endwall heat transfer for a nozzle guide vane Journal of Turbomachinery. 130. DOI: 10.1115/1.2812950  1
2008 Sundaram N, Thole KA. Bump and trench modifications to film-cooling holes at the vane-endwall junction Journal of Turbomachinery. 130. DOI: 10.1115/1.2812933  1
2008 Colban W, Thole KA, Haendler M. A comparison of cylindrical and fan-shaped film-cooling holes on a vane endwall at low and high freestream turbulence levels Journal of Turbomachinery. 130. DOI: 10.1115/1.2720493  1
2008 Lawson MJ, Thole KA. Heat transfer augmentation along the tube wall of a louvered fin heat exchanger using practical delta winglets International Journal of Heat and Mass Transfer. 51: 2346-2360. DOI: 10.1016/J.Ijheatmasstransfer.2007.08.016  1
2007 Carullo JS, Nasir S, Cress RD, Ng WF, Thole KA, Zhang LJ, Moon HK. The effects of freestream turbulence, turbulence length scale and exit Reynolds number on turbine blade heat transfer in a transonic cascade Proceedings of the Asme Turbo Expo. 4: 1077-1089. DOI: 10.1115/GT2007-27859  1
2007 Lyall ME, Thrift AA, Kohli A, Thole KA. Heat transfer from low aspect ratio pin fins Proceedings of the Asme Turbo Expo. 4: 413-422. DOI: 10.1115/GT2007-27431  1
2007 Sundaram N, Thole KA. Bump and trench modifications to film-cooling holes at the vane endwall junction Proceedings of the Asme Turbo Expo. 4: 197-207. DOI: 10.1115/GT2007-27132  1
2007 Sundaram N, Barringer MD, Thole KA. Effects of deposits on film cooling of a vane endwall along the pressure side Proceedings of the Asme Turbo Expo. 4: 185-195. DOI: 10.1115/1.2812332  1
2007 Cardwell ND, Sundaram N, Thole KA. The effects of varying the combustor-turbine gap Journal of Turbomachinery. 129: 756-764. DOI: 10.1115/1.2720497  1
2007 Scrittore JJ, Thole KA, Burd SW. Investigation of velocity profiles for effusion cooling of a combustor liner Journal of Turbomachinery. 129: 518-526. DOI: 10.1115/1.2720492  1
2007 Sundaram N, Thole KA. Effects of surface deposition, hole blockage, and thermal barrier coating spallation on vane endwall film cooling Journal of Turbomachinery. 129: 599-607. DOI: 10.1115/1.2720485  1
2007 Barringer MD, Thole KA, Polanka MD. Experimental evaluation of an inlet profile generator for high-pressure turbine tests Journal of Turbomachinery. 129: 382-394. DOI: 10.1115/1.2436897  1
2007 Colban W, Thole KA, Haendler M. Experimental and computational comparisons of fan-shaped film cooling on a turbine vane surface Journal of Turbomachinery. 129: 23-31. DOI: 10.1115/1.2370747  1
2006 Bogard DG, Thole KA. Gas turbine film cooling Journal of Propulsion and Power. 22: 249-270. DOI: 10.2514/1.18034  1
2006 Lawson MJ, Sanders P, Thole KA. Computational and experimental comparison of tube wall heat transfer augmented by winglets in louvered fin heat exchangers American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. DOI: 10.1115/IMECE2006-14452  1
2006 Sundaram N, Thole KA. Effects of surface deposition, hole blockage, and TBC spallation on vane endwall film-cooling Proceedings of the Asme Turbo Expo. 3: 407-418. DOI: 10.1115/GT2006-90379  1
2006 Barringer MD, Thole KA, Polanka MD. Effects of combustor exit profiles on high pressure turbine vane aerodynamics and heat transfer Proceedings of the Asme Turbo Expo. 3: 285-295. DOI: 10.1115/GT2006-90277  1
2006 Kunze VR, Wolff M, Barringer MD, Thole KA, Polanka MD. Numerical insight into flow and thermal patterns within an inlet profile generator comparing to experimental results Proceedings of the Asme Turbo Expo. 3: 271-283. DOI: 10.1115/GT2006-90276  1
2006 Walsh WS, Thole KA, Joe C. Effects of sand ingestion on the blockage of film-cooling holes Proceedings of the Asme Turbo Expo. 3: 81-90. DOI: 10.1115/GT2006-90067  1
2006 Barringer MD, Thole KA, Polanka MD. Experimental evaluation of an inlet profile generator for high pressure turbine tests Proceedings of the Asme Turbo Expo. 3: 447-458. DOI: 10.1115/1.2436897  1
2006 Cardwell ND, Sundaram N, Thole KA. Effect of midpassage gap, endwall misalignment, and roughness on endwall film-cooling Journal of Turbomachinery. 128: 62-70. DOI: 10.1115/1.2098791  1
2006 Colban W, Gratton A, Thole KA, Haendler M. Heat transfer and film-cooling measurements on a stator vane with fan-shaped cooling holes Journal of Turbomachinery. 128: 53-61. DOI: 10.1115/1.2098789  1
2006 Sanders PA, Thole KA. Effects of winglets to augment tube wall heat transfer in louvered fin heat exchangers International Journal of Heat and Mass Transfer. 49: 4058-4069. DOI: 10.1016/J.Ijheatmasstransfer.2006.03.036  1
2006 Sewall EA, Tafti DK, Graham AB, Thole KA. Experimental validation of large eddy simulations of flow and heat transfer in a stationary ribbed duct International Journal of Heat and Fluid Flow. 27: 243-258. DOI: 10.1016/J.Ijheatfluidflow.2005.08.010  1
2006 Hada S, Thole KA. Study of leakage flows for a first vane in a gas turbine Proceedings of the 11th International Symposium On Transport Phenomena and Dynamics of Rotating Machinery, Isromac-11. 1: 330-343.  1
2005 Hohlfeld EM, Christophel JR, Couch EL, Thole KA. Predictions of cooling from dirt purge holes along the tip of a turbine blade International Journal of Turbo and Jet Engines. 22: 139-152. DOI: 10.1515/Tjj.2005.22.3.139  1
2005 Knost DG, Thole KA. Computational predictions of endwall film-cooling for a first stage vane International Journal of Turbo and Jet Engines. 22: 41-58. DOI: 10.1515/Tjj.2005.22.1.41  1
2005 Colban W, Thole KA, Haendler M. Experimental and computational comparisons of fan-shaped film-cooling on a turbine vane surface American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 376: 455-465. DOI: 10.1115/IMECE2005-79596  1
2005 Cardwell ND, Sundaram N, Thole KA. Effects of mid-passage gap, endwall misalignment and roughness on endwall film-cooling Proceedings of the Asme Turbo Expo. 3: 773-783. DOI: 10.1115/GT2005-68900  1
2005 Scrittore JJ, Thole KA, Burd SW. Experimental characterization of film-cooling effectiveness near combustor dilution holes Proceedings of the Asme Turbo Expo. 3: 1339-1347. DOI: 10.1115/GT2005-68704  1
2005 Kunze VR, Wolff M, Barringer MD, Thole KA, Polanka MD. Numerical modeling of flow and thermal patterns within a combustor simulator Proceedings of the Asme Turbo Expo. 6: 519-528. DOI: 10.1115/GT2005-68284  1
2005 Hohlfeld EM, Christophel JR, Couch EL, Thole KA. Predictions of cooling from dirt purge holes along the tip of a turbine blade International Journal of Turbo and Jet Engines. 22: 139-152. DOI: 10.1115/GT2003-38251  1
2005 Ranson WW, Thole KA, Cunha FJ. Adiabatic effectiveness measurements and predictions of leakage flows along a blade endwall Journal of Turbomachinery. 127: 609-618. DOI: 10.1115/1.1929809  1
2005 Pang YF, Scott EP, Chen JZ, Thole KA. Thermal design and optimization methodology for integrated power electronics modules Journal of Electronic Packaging, Transactions of the Asme. 127: 59-66. DOI: 10.1115/1.1849233  1
2005 Christophel JR, Thole KA, Cunha FJ. Cooling the tip of a turbine blade using pressure side holes - Part I: Adiabatic effectiveness measurements Journal of Turbomachinery. 127: 270-277. DOI: 10.1115/1.1812320  1
2005 Knost DG, Thole KA. Adiabatic effectiveness measurements of endwall film-cooling for a first-stage vane Journal of Turbomachinery. 127: 297-305. DOI: 10.1115/1.1811099  1
2005 Christophel JR, Thole KA, Cunha FJ. Cooling the tip of a turbine blade using pressure side holes - Part II: Heat transfer measurements Journal of Turbomachinery. 127: 278-286. DOI: 10.1115/1.1811096  1
2005 Christophel JR, Couch E, Thole KA, Cunha FJ. Measured adiabatic effectiveness and heat transfer for blowing from the tip of a turbine blade Journal of Turbomachinery. 127: 251-262. DOI: 10.1115/1.1811095  1
2005 Vakil SS, Thole KA. Flow and thermal field measurements in a combustor simulator relevant to a gas turbine aeroengine Journal of Engineering For Gas Turbines and Power. 127: 257-267. DOI: 10.1115/1.1806455  1
2005 Thole KA, Knost DG. Heat transfer and film-cooling for the endwall of a first stage turbine vane International Journal of Heat and Mass Transfer. 48: 5255-5269. DOI: 10.1016/J.Ijheatmasstransfer.2005.07.036  1
2005 Stephan RA, Thole KA. Optimization study relevant to louvered fin compact heat exchangers International Journal of Heat Exchangers. 6: 73-92.  1
2004 Lethander AT, Thole KA, Zess G, Wagner J. Vane-endwall junction optimization to reduce turbine vane passage adiabatic wall temperatures Journal of Propulsion and Power. 20: 1105-1116. DOI: 10.2514/1.3887  1
2004 Stitzel S, Thole KA. Flow field computations of combustor-turbine interactions relevant to a gas turbine engine Journal of Turbomachinery. 126: 122-129. DOI: 10.1115/1.1625691  1
2004 Knost DG, Thole KA. Adiabatic effectiveness measurements of endwall film-cooling for a first stage vane Proceedings of the Asme Turbo Expo 2004. 3: 353-362.  1
2004 Graham A, Sewall E, Thole KA. Flowfield measurements in a ribbed channel relevant to internal turbine blade cooling Proceedings of the Asme Turbo Expo 2004. 3: 383-391.  1
2004 Barringer MD, Thole KA, Polanka MD. Developing a combustor simulator for investigating high pressure turbine aerodynamics and heat transfer Proceedings of the Asme Turbo Expo 2004. 3: 565-575.  1
2004 Christophel JR, Thole KA, Cunha FJ. Cooling the tip of a turbine blade using pressure side holes - Part 1: Adiabatic effectiveness measurements Proceedings of the Asme Turbo Expo 2004. 3: 263-271.  1
2004 Christophel JR, Thole KA, Cunha FJ. Cooling the tip of a turbine blade using pressure side holes - Part 2: Heat transfer measurements Proceedings of the Asme Turbo Expo 2004. 3: 273-282.  1
2004 Smith AC, Hatchett JH, Nix AC, Ng WF, Thole KA, Cunha FJ. Effectiveness of normal and angled slot cooling Proceedings of the Asme Turbo Expo 2004. 3: 233-240.  1
2004 Ebeling CP, Thole KA. Measurements and predictions of the heat transfer at the tube-fin junction for louvered fin heat exchangers International Journal of Heat Exchangers. 5: 265-286.  1
2003 Lethander AT, Thole KA, Zess G, Wagner J. Optimizing the vane-endwall junction to reduce adiabatic wall temperatures in a turbine vane passage American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) Igti. 5: 711-721. DOI: 10.1115/GT2003-38939  1
2003 Vakil SS, Thole KA. Flow and thermal field measurements in a combustor simulator relevant to a gas turbine aero-engine American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) Igti. 2: 215-224. DOI: 10.1115/GT2003-38254  1
2003 Colban WF, Lethander AT, Thole KA, Zess G. Combustor turbine interface studies - Part 2: Flow and thermal field measurements Journal of Turbomachinery. 125: 203-209. DOI: 10.1115/1.1561812  1
2003 Colban WF, Thole KA, Zess G. Combustor turbine interface studies - Part 1: Endwall effectiveness measurements Journal of Turbomachinery. 125: 193-202. DOI: 10.1115/1.1561811  1
2002 Pang YF, Chen JZ, Scott EP, Thole KA. Electrical and thermal layout design and optimization considerations for DPS active IPEM American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 372: 253-259. DOI: 10.1115/IMECE2002-33778  1
2002 Nix AC, Smith AC, Diller TE, Ng WF, Thole KA. High intensity, large length-scale freestream turbulence generation in a transonic turbine cascade American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) Igti. 3: 961-968. DOI: 10.1115/GT2002-30523  1
2002 Hermanson KS, Thole KA. Effect of non-uniform inlet conditions on endwall secondary flows American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) Igti. 3: 245-254. DOI: 10.1115/1.1505849  1
2002 Hermanson KS, Thole KA. Effect of nonuniform inlet conditions on endwall secondary flows Journal of Turbomachinery. 124: 623-631. DOI: 10.1115/1.1505849  1
2002 Barringer MD, Richard OT, Walter JP, Stitzel SM, Thole KA. Flow field simulations of a gas turbine combustor Journal of Turbomachinery. 124: 508-516. DOI: 10.1115/1.1475742  1
2002 Zess GA, Thole KA. Computational design and experimental evaluation of using a leading edge fillet on a gas turbine vane Journal of Turbomachinery. 124: 167-175. DOI: 10.1115/1.1460914  1
2002 Radomsky RW, Thole KA. Detailed boundary layer measurements on a turbine stator vane at elevated freestream turbulence levels Journal of Turbomachinery. 124: 107-118. DOI: 10.1115/1.1424891  1
2002 Lyman AC, Stephan RA, Thole KA, Zhang LW, Memory SB. Scaling of heat transfer coefficients along louvered fins Experimental Thermal and Fluid Science. 26: 547-563. DOI: 10.1016/S0894-1777(02)00163-2  1
2002 Thole KA, Radomsky RW, Kang MB, Kohli A. Elevated freestream turbulence effects on heat transfer for a gas turbine vane International Journal of Heat and Fluid Flow. 23: 137-147. DOI: 10.1016/S0142-727X(01)00145-X  1
2002 Chen JZ, Pang YF, Boroyevich D, Scott EP, Thole KA. Electrical and thermal layout design considerations for integrated power electronics modules Conference Record - Ias Annual Meeting (Ieee Industry Applications Society). 1: 242-246.  1
2001 Harrington MK, McWaters MA, Bogard DG, Lemmon CA, Thole KA. Full-coverage film cooling with short normal injection holes Journal of Turbomachinery. 123: 798-805. DOI: 10.1115/1.1400111  1
2000 Hermanson KS, Thole KA. Effect of inlet conditions on endwall secondary flows Journal of Propulsion and Power. 16: 286-296. DOI: 10.2514/2.5567  1
2000 Hermanson KS, Thole KA. Effect of Mach number on secondary flow characteristics International Journal of Turbo and Jet Engines. 17: 179-196. DOI: 10.1515/Tjj.2000.17.3.179  1
2000 Radomsky RW, Thole KA. High freestream turbulence effects on endwall heat transfer for a gas turbine stator vane Proceedings of the Asme Turbo Expo. 3. DOI: 10.1115/2000-GT-0201  1
2000 Radomsky RW, Thole KA. Flowfield measurements for a highly turbulent flow in a stator vane passage Journal of Turbomachinery. 122: 255-262. DOI: 10.1115/1.555442  1
2000 Radomsky RW, Thole KA. Measurements and predictions of a highly turbulent flowfield in a turbine vane passage Journal of Fluids Engineering, Transactions of the Asme. 122: 666-676. DOI: 10.1115/1.1313244  1
2000 Radomsky RW, Thole KA. High free-steam turbulence effects on endwall heat transfer for a gas turbine stator vane Journal of Turbomachinery. 122: 699-708. DOI: 10.1115/1.1312807  1
2000 Kang MB, Thole KA. Flowfield measurements in the endwall region of a stator vane Journal of Turbomachinery. 122: 458-466. DOI: 10.1115/1.1303703  1
1999 Kang MB, Kohli A, Thole KA. Closure to “Discussion of ‘Heat Transfer and Flowfield Measurements in the Leading Edge Region of a Stator Vane Endwall’” (1999, ASME J. Turbomach., 121, p. 568) Journal of Turbomachinery-Transactions of the Asme. 121: 568-568. DOI: 10.1115/1.2841353  1
1999 Kang MB, Kohli A, Thole KA. Heat Transfer and Flowfield Measurements in the Leading Edge Region of a Stator Vane Endwall Journal of Turbomachinery-Transactions of the Asme. 121: 558-568. DOI: 10.1115/1.2841351  1
1999 Springer ME, Thole KA. Entry region of louvered fin heat exchangers Experimental Thermal and Fluid Science. 19: 223-232. DOI: 10.1016/S0894-1777(99)00028-X  1
1996 Thole KA, Bogard DG. High Freestream Turbulence Effects on Turbulent Boundary Layers Journal of Fluids Engineering-Transactions of the Asme. 118: 276-284. DOI: 10.1115/1.2817374  1
1995 Thole KA, Bogard DG. Enhanced Heat Transfer and Shear Stress Due to High Free-Stream Turbulence Journal of Turbomachinery-Transactions of the Asme. 117: 418-424. DOI: 10.1115/1.2835677  1
1994 Thole KA, Bogard DG. Simultaneous temperature and velocity measurements Measurement Science and Technology. 5: 435-439. DOI: 10.1088/0957-0233/5/4/018  1
1994 Thole KA, Bogard DG, Whan-Tong JL. Generating high freestream turbulence levels Experiments in Fluids. 17: 375-380. DOI: 10.1007/Bf01877037  1
Show low-probability matches.