Year |
Citation |
Score |
2020 |
Kishore V, Chen X, Hassen AA, Lindahl J, Kunc V, Duty C. Post-process annealing of large-scale 3D printed polyphenylene sulfide composites Additive Manufacturing. 35: 101387. DOI: 10.1016/J.Addma.2020.101387 |
0.415 |
|
2020 |
Nycz A, Kishore V, Lindahl J, Duty C, Carnal C, Kunc V. Controlling substrate temperature with infrared heating to improve mechanical properties of large-scale printed parts Additive Manufacturing. 33: 101068. DOI: 10.1016/J.Addma.2020.101068 |
0.468 |
|
2020 |
Kishore V, Ajinjeru C, Hassen AA, Lindahl J, Kunc V, Duty C. Rheological behavior of neat and carbon fiber‐reinforced poly(ether ketone ketone) for extrusion deposition additive manufacturing Polymer Engineering and Science. 60: 1066-1075. DOI: 10.1002/Pen.25362 |
0.37 |
|
2019 |
Ajinjeru C, Kishore V, Chen X, Hershey C, Lindahl J, Kunc V, Hassen AA, Duty C. Rheological survey of carbon fiber-reinforced high-temperature thermoplastics for big area additive manufacturing tooling applications: Journal of Thermoplastic Composite Materials. 89270571987394. DOI: 10.1177/0892705719873941 |
0.368 |
|
2019 |
Moon J, Ivanov IN, Duty CE, Love LJ, Phelps TJ. Microbial Approach to Low-Cost Production of Photovoltaic Nanomaterials Acs Sustainable Chemistry & Engineering. 7: 18297-18302. DOI: 10.1021/Acssuschemeng.9B03269 |
0.344 |
|
2019 |
Chern AH, Nandwana P, Yuan T, Kirka MM, Dehoff RR, Liaw PK, Duty CE. A review on the fatigue behavior of Ti-6Al-4V fabricated by electron beam melting additive manufacturing International Journal of Fatigue. 119: 173-184. DOI: 10.1016/J.Ijfatigue.2018.09.022 |
0.301 |
|
2019 |
Duty C, Failla J, Kim S, Smith T, Lindahl J, Kunc V. Z-Pinning approach for 3D printing mechanically isotropic materials Additive Manufacturing. 27: 175-184. DOI: 10.1016/J.Addma.2019.03.007 |
0.35 |
|
2018 |
Compton BG, Kemp JW, Novikov TV, Pack RC, Nlebedim CI, Duty CE, Rios O, Paranthaman MP. Direct-Write 3D-Printing of NdFeB Bonded Magnets Materials and Manufacturing Processes. 33: 109-113. DOI: 10.1080/10426914.2016.1221097 |
0.306 |
|
2018 |
Duty C, Ajinjeru C, Kishore V, Compton B, Hmeidat N, Chen X, Liu P, Hassen AA, Lindahl J, Kunc V. What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers Journal of Manufacturing Processes. 35: 526-537. DOI: 10.1016/J.Jmapro.2018.08.008 |
0.419 |
|
2018 |
Ajinjeru C, Kishore V, Liu P, Lindahl J, Hassen AA, Kunc V, Post B, Love L, Duty C. Determination of melt processing conditions for high performance amorphous thermoplastics for large format additive manufacturing Additive Manufacturing. 21: 125-132. DOI: 10.1016/J.Addma.2018.03.004 |
0.392 |
|
2018 |
Ajinjeru C, Kishore V, Lindahl J, Sudbury Z, Hassen AA, Post B, Love L, Kunc V, Duty C. The influence of dynamic rheological properties on carbon fiber-reinforced polyetherimide for large-scale extrusion-based additive manufacturing The International Journal of Advanced Manufacturing Technology. 99: 411-418. DOI: 10.1007/S00170-018-2510-Z |
0.371 |
|
2017 |
Duty CE, Kunc V, Compton B, Post B, Erdman D, Smith R, Lind R, Lloyd P, Love L. Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials Rapid Prototyping Journal. 23: 181-189. DOI: 10.1108/Rpj-12-2015-0183 |
0.408 |
|
2017 |
Compton BG, Post BK, Duty CE, Love L, Kunc V. Thermal analysis of additive manufacturing of large-scale thermoplastic polymer composites Additive Manufacturing. 17: 77-86. DOI: 10.1016/J.Addma.2017.07.006 |
0.455 |
|
2017 |
Kishore V, Ajinjeru C, Nycz A, Post B, Lindahl J, Kunc V, Duty C. Infrared preheating to improve interlayer strength of big area additive manufacturing (BAAM) components Additive Manufacturing. 14: 7-12. DOI: 10.1016/J.Addma.2016.11.008 |
0.438 |
|
2017 |
Sudbury TZ, Springfield R, Kunc V, Duty C. An assessment of additive manufactured molds for hand-laid fiber reinforced composites The International Journal of Advanced Manufacturing Technology. 90: 1659-1664. DOI: 10.1007/S00170-016-9464-9 |
0.341 |
|
2016 |
Zhou W, List FA, Duty CE, Babu SS. Fabrication of conductive paths on a fused deposition modeling substrate using inkjet deposition Rapid Prototyping Journal. 22: 77-86. DOI: 10.1108/Rpj-05-2014-0070 |
0.421 |
|
2015 |
Zhou W, List FA, Duty CE, Babu SS. Sintering Kinetics of Inkjet Printed Conductive Silver Lines on Insulating Plastic Substrate Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 46: 1542-1547. DOI: 10.1007/S11663-014-0288-4 |
0.381 |
|
2014 |
Love LJ, Kunc V, Rios O, Duty CE, Elliott AM, Post BK, Smith RJ, Blue CA. The importance of carbon fiber to polymer additive manufacturing Journal of Materials Research. 29: 1893-1898. DOI: 10.1557/Jmr.2014.212 |
0.37 |
|
2014 |
Dinwiddie RB, Kunc V, Lindal JM, Post B, Smith RJ, Love L, Duty CE. Infrared imaging of the polymer 3D-printing process Proceedings of Spie - the International Society For Optical Engineering. 9105. DOI: 10.1117/12.2053425 |
0.385 |
|
2014 |
Tekinalp HL, Kunc V, Velez-Garcia GM, Duty CE, Love LJ, Naskar AK, Blue CA, Ozcan S. Highly oriented carbon fiber-polymer composites via additive manufacturing Composites Science and Technology. 105: 144-150. DOI: 10.1016/J.Compscitech.2014.10.009 |
0.353 |
|
2014 |
Park S, Rosen DW, Choi S, Duty CE. Effective mechanical properties of lattice material fabricated by material extrusion additive manufacturing Additive Manufacturing. 1: 12-23. DOI: 10.1016/J.Addma.2014.07.002 |
0.328 |
|
2010 |
Wereszczak AA, Harper DC, Duty CE, Patel P. Glass strengthening via high-intensity plasma-arc heating Journal of the American Ceramic Society. 93: 1256-1259. DOI: 10.1111/J.1551-2916.2009.03553.X |
0.314 |
|
2010 |
Sethian JD, Colombant DG, Giuliani JL, Lehmberg RH, Myers MC, Obenschain SP, Schmitt AJ, Weaver J, Wolford MF, Hegeler F, Friedman M, Robson AE, Bayramian A, Caird J, Ebbers C, ... ... Duty C, et al. The science and technologies for fusion energy with lasers and direct-drive targets Ieee Transactions On Plasma Science. 38: 690-703. DOI: 10.1109/Tps.2009.2037629 |
0.328 |
|
2009 |
Sabau AS, Duty CE, Dinwiddie RB, Nichols M, Blue CA, Ott RD. A radiative transport model for heating paints using high density plasma arc lamps Journal of Applied Physics. 105: 84901. DOI: 10.1063/1.3097356 |
0.338 |
|
2007 |
Johnson R, Duty C, Fedorov A, Lackey W. Computational modeling of forced flow laser chemical vapor deposition Applied Physics A. 90: 333-345. DOI: 10.1007/S00339-007-4278-0 |
0.452 |
|
2005 |
Jean D, Lackey WJ, Duty CE. Temperature controlled laser chemical vapor deposition (LCVD) using thermal imaging Assembly Automation. 25: 293-299. DOI: 10.1108/01445150510626424 |
0.689 |
|
2003 |
Duty C, Johnson R, Gillespie J, Fedorov A, Lackey J. Heat and mass-transfer modeling of an angled gas-jet LCVD system Applied Physics A. 77: 697-705. DOI: 10.1007/S00339-002-1887-5 |
0.405 |
|
2003 |
Duty C, Johnson R, Bondi S, Lackey WJ. Pyrolytic laser CVD of boron nitride and molybdenum Chemical Vapor Deposition. 9: 298-301. DOI: 10.1002/Cvde.200304159 |
0.397 |
|
2002 |
Jean D, Duty C, Johnson R, Bondi S, Lackey WJ. Carbon fiber growth kinetics and thermodynamics using temperature controlled LCVD Carbon. 40: 1435-1445. DOI: 10.1016/S0008-6223(01)00307-4 |
0.676 |
|
2001 |
Duty C, Jean D, Lackey WJ. Laser chemical vapour deposition: materials, modelling, and process control International Materials Reviews. 46: 271-287. DOI: 10.1179/095066001771048727 |
0.684 |
|
Show low-probability matches. |