Fritz Klocke - Publications

Affiliations: 
Mechanical Engineering Rheinisch-Westfaelische Technische Hochschule, Aachen, NRW, Germany 

424 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2020 Kühn F, Löpenhaus C, Brimmers J, Klocke F, Bergs T. Analysis of the influence of the effective angles on the tool wear in gear hobbing The International Journal of Advanced Manufacturing Technology. 108: 2621-2632. DOI: 10.1007/S00170-020-05499-0  0.426
2020 Peng B, Bergs T, Schraknepper D, Smigielski T, Klocke F. Correction to: Development and validation of a new friction model for cutting processes The International Journal of Advanced Manufacturing Technology. 107: 4371-4371. DOI: 10.1007/S00170-020-05335-5  0.402
2020 Peng B, Bergs T, Schraknepper D, Smigielski T, Klocke F. Development and validation of a new friction model for cutting processes The International Journal of Advanced Manufacturing Technology. 107: 4357-4369. DOI: 10.1007/S00170-019-04709-8  0.462
2019 Klocke F, Broeckmann C, Löpenhaus C, Bezold A, Frech T, Hajeck M, Scholzen P, Gebhardt C. High-strength gears produced by powder metallurgical processes – KL500/93-2 Industrial Lubrication and Tribology. 72: 723-728. DOI: 10.1108/Ilt-06-2018-0248  0.375
2019 Klocke F, Bergs T, Löpenhaus C, Scholzen P, Frech T. Influence of hard rolling and the cooling lubricant on the material properties and the rolling strength of PM gears Industrial Lubrication and Tribology. 71: 406-410. DOI: 10.1108/Ilt-06-2018-0247  0.417
2019 Hild R, Bergs T, Mattfeld P, Trauth D, Klocke F, Hoffmann DC, Kruppe NC, Brögelmann T, Bobzin K. Analysis of wear phenomena during forward extrusion under dry friction conditions Wear. 1362-1370. DOI: 10.1016/J.Wear.2019.01.127  0.449
2019 Peng B, Bergs T, Schraknepper D, Klocke F, Döbbeler B. A hybrid approach using machine learning to predict the cutting forces under consideration of the tool wear Procedia Cirp. 82: 302-307. DOI: 10.1016/J.Procir.2019.04.031  0.405
2019 Troß N, Löpenhaus C, Klocke F. Analysis of the cutting conditions for radial-axial infeed strategies in gear hobbing Procedia Cirp. 79: 68-73. DOI: 10.1016/J.Procir.2019.02.013  0.436
2019 Klocke F, Döbbeler B, Pullen T, Bergs T. Acoustic emission signal source separation for a flank wear estimation of drilling tools Procedia Cirp. 79: 57-62. DOI: 10.1016/J.Procir.2019.02.011  0.357
2019 Klocke F, Döbbeler B, Goetz S, Arruda J. Data segmentation of effective power signals in the hobbing process Procedia Cirp. 79: 45-50. DOI: 10.1016/J.Procir.2019.02.009  0.368
2019 Augspurger T, Koch M, Klocke F, Döbbeler B. Investigation of transient temperature fields in the milling cutter under CO2 cooling by means of an embedded thermocouple Procedia Cirp. 79: 33-38. DOI: 10.1016/J.Procir.2019.02.007  0.33
2019 Kühn F, Löpenhaus C, Klocke F. Model for the calculation of kinematic roughness in the tooth root Procedia Cirp. 79: 15-20. DOI: 10.1016/J.Procir.2019.02.004  0.344
2019 Buchert T, Ko N, Graf R, Vollmer T, Alkhayat M, Brandenburg E, Stark R, Klocke F, Leistner P, Schleifenbaum JH. Increasing resource efficiency with an engineering decision support system for comparison of product design variants Journal of Cleaner Production. 210: 1051-1062. DOI: 10.1016/J.Jclepro.2018.11.104  0.335
2019 Bergs T, Chrubasik L, Petersen T, Klink A, Klocke F. Experimental analysis of surface integrity of cemented carbides resulting from contemporary sinking EDM technology Production Engineering. 13: 511-517. DOI: 10.1007/S11740-019-00896-1  0.482
2019 Peng B, Bergs T, Klocke F, Döbbeler B. An advanced FE-modeling approach to improve the prediction in machining difficult-to-cut material The International Journal of Advanced Manufacturing Technology. 103: 2183-2196. DOI: 10.1007/S00170-019-03456-0  0.477
2019 Zander D, Klink A, Harst S, Klocke F, Altenbach C. Influence of machining processes on rim zone properties and high temperature oxidation behavior of 42CrMo4 Materials and Corrosion-Werkstoffe Und Korrosion. 70: 2190-2204. DOI: 10.1002/Maco.201910928  0.385
2018 Klocke F, Shirobokov A, Hild R, Feuerhack A, Trauth D, Mattfeld P. Friction and Wear Analysis of Deep Rolled and Vibrorolled Specimens in Lubricated Contact Key Engineering Materials. 767: 93-100. DOI: 10.4028/Www.Scientific.Net/Kem.767.93  0.334
2018 Augspurger T, Peng B, Klocke F, Döbbeler B. Heat Flow into the Tool in Cutting Super Alloy Inconel 718 Journal of Mechanics Engineering and Automation. 8. DOI: 10.17265/2159-5275/2018.01.001  0.308
2018 Teli M, Klocke F, Arntz K, Winands K. Effect of niobium on microstructure-property relationship in H11 hot-work tool steel via wire- and powder-based laser metal deposition International Journal of Mechatronics and Manufacturing Systems. 11: 135. DOI: 10.1504/Ijmms.2018.10013930  0.369
2018 Lachenmaier M, Brocker R, Trauth D, Klocke F. Analysis of the Relative Velocity and Its Influence on the Process Results in Unguided Vibratory Finishing Journal of Manufacturing Science and Engineering-Transactions of the Asme. 140: 31012. DOI: 10.1115/1.4038571  0.332
2018 Bobzin K, Brögelmann T, Kruppe NC, Hoffmann DC, Klocke F, Mattfeld P, Trauth D, Hild R. Tribological Studies on Self-Lubricating (Cr,Al)N+Mo:S Coatings at Elevated Temperature Surface & Coatings Technology. 353: 282-291. DOI: 10.1016/J.Surfcoat.2018.06.067  0.387
2018 Klocke F, Welschof L, Herrig T, Klink A. Evaluation of Contemporary Wire EDM for the Manufacture of Highly Loaded Titanium Parts for Space Applications Procedia Manufacturing. 18: 146-151. DOI: 10.1016/J.Promfg.2018.11.019  0.471
2018 Bergs T, Tombul U, Herrig T, Olivier M, Klink A, Klocke F. Analysis of Characteristic Process Parameters to Identify Unstable Process Conditions during Wire EDM Procedia Manufacturing. 18: 138-145. DOI: 10.1016/J.Promfg.2018.11.018  0.505
2018 Bergs T, Tombul U, Herrig T, Klink A, Klocke F. Experimental Analysis of Influence of Discharge Current, Pulse Interval Time and Flushing Conditions on WEDM Performance Procedia Manufacturing. 18: 130-137. DOI: 10.1016/J.Promfg.2018.11.017  0.478
2018 Bergs T, Smeets G, Seimann M, Doebbeler B, Klink A, Klocke F. Surface integrity and economical assessment of alternative manufactured profiled grooves in a nickel-based alloy Procedia Manufacturing. 18: 112-119. DOI: 10.1016/J.Promfg.2018.11.015  0.506
2018 Klocke F, Döbbeler B, Goetz S. Estimation of the load torque in a hobbing machine using effective power signals Procedia Manufacturing. 18: 43-49. DOI: 10.1016/J.Promfg.2018.11.006  0.379
2018 Trauth D, Stanke J, Feuerhack A, Bergs T, Mattfeld P, Klocke F. A characterization of quality of sheared edge in fine blanking using edge-computing approach Procedia Manufacturing. 15: 578-583. DOI: 10.1016/J.Promfg.2018.07.280  0.362
2018 Stanke J, Feuerhack A, Trauth D, Mattfeld P, Klocke F. A predictive model for die roll height in fine blanking using machine learning methods Procedia Manufacturing. 15: 570-577. DOI: 10.1016/J.Promfg.2018.07.279  0.33
2018 Seimann M, Peng B, Klocke F, Döbbeler B. Multi Flank Chip Formation in Fir-Tree Broaching Inconel 718 with Cemented Carbide Procedia Manufacturing. 26: 503-508. DOI: 10.1016/J.Promfg.2018.07.059  0.493
2018 Teli M, Klocke F, Arntz K, Winands K, Schulz M, Oliari S. Study for Combined Wire + Powder Laser Metal Deposition of H11 and Niobium Procedia Manufacturing. 25: 426-434. DOI: 10.1016/J.Promfg.2018.06.113  0.392
2018 Demmer A, Klingbeil N, Klocke F, Putz M, Schmitt R, Vollmer T. Target-oriented Analysis of Resource Consumption in Manufacturing Process Chains Procedia Manufacturing. 21: 462-467. DOI: 10.1016/J.Promfg.2018.02.145  0.369
2018 Cayli T, Klocke F, Döbbeler B. Increasing Energy Efficiency in Turning of Aerospace Materials with High-Pressure Coolant Supply Procedia Manufacturing. 21: 405-412. DOI: 10.1016/J.Promfg.2018.02.138  0.451
2018 Miura K, Döbbeler B, Klocke F. Cutting Power Estimation via External Voltage and Current Sensors on Feed-Drive Axis for the Straight Milling Process Procedia Cirp. 78: 323-328. DOI: 10.1016/J.Procir.2018.09.068  0.363
2018 Wrobel C, Mattfeld P, Trauth D, Klocke F. Modeling of the temperature field in the workpiece external zone as a function of the grinding wheel topography Procedia Cirp. 77: 291-294. DOI: 10.1016/J.Procir.2018.09.018  0.392
2018 Klocke F, Seimann M, Binder M, Doebbeler B. Milling of Fir-Tree Slots in Allvac 718 plus Procedia Cirp. 77: 409-412. DOI: 10.1016/J.Procir.2018.08.297  0.472
2018 Klocke F, Döbbeler B, Lakner T. Influence of cooling nozzle orientation on the machinability of TiAl6V4 and 42CrMo4+QT in rough milling Procedia Cirp. 77: 66-69. DOI: 10.1016/J.Procir.2018.08.217  0.488
2018 Klocke F, Döbbeler B, Peng B, Schneider S. Tool-based inverse determination of material model of Direct Aged Alloy 718 for FEM cutting simulation Procedia Cirp. 77: 54-57. DOI: 10.1016/J.Procir.2018.08.211  0.446
2018 Klocke F, Welschof L, Herrig T, Klink A. Model-based Productivity Analysis of Wire EDM for the Manufacturing of Titanium Procedia Cirp. 77: 594-597. DOI: 10.1016/J.Procir.2018.08.209  0.429
2018 Klocke F, Olivier M, Degenhardt U, Herrig T, Tombul U, Klink A. Investigation on Wire-EDM Finishing of Titanium Nitride Doped Silicon Nitride in CH-based Dielectrics Procedia Cirp. 77: 650-653. DOI: 10.1016/J.Procir.2018.08.185  0.45
2018 Hardt M, Klocke F, Döbbeler B, Binder M, Jawahir IS. Experimental study on surface integrity of cryogenically machined Ti-6Al-4V alloy for biomedical devices Procedia Cirp. 71: 181-186. DOI: 10.1016/J.Procir.2018.05.094  0.407
2018 Klocke F, Dambon O, Bletek T, Höche T, Naumann F, Hutzler T. Surface Integrity in Ultra-Precision Grinding of Transparent Ceramics Procedia Cirp. 71: 177-180. DOI: 10.1016/J.Procir.2018.05.093  0.441
2018 Mannens R, Trauth D, Mattfeld P, Klocke F. Influence of Impact Force, Impact Angle, and Stroke Length in Machine Hammer Peening on the Surface Integrity of the Stainless Steel X3CrNiMo13-4 Procedia Cirp. 71: 166-171. DOI: 10.1016/J.Procir.2018.05.091  0.459
2018 Klocke F, Mohammadnejad M, Hess R, Harst S, Klink A. Phase Field Modeling of the Microstructure Evolution in a Steel Workpiece under High Temperature Gradients Procedia Cirp. 71: 99-104. DOI: 10.1016/J.Procir.2018.05.079  0.406
2018 Klocke F, Smeets G, Kittel M, Olivier M, Hama-Saleh R, Harst S, Klink A. Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics Procedia Cirp. 71: 238-243. DOI: 10.1016/J.Procir.2018.05.064  0.416
2018 Lachenmaier M, Dehmer A, Trauth D, Mattfeld P, Klocke F. Influence of different input parameters on the contact conditions determing the surface integrity of workpieces in an unguided vibratory finishing process Procedia Cirp. 71: 53-58. DOI: 10.1016/J.Procir.2018.05.022  0.421
2018 Frech T, Scholzen P, Schäflein P, Löpenhaus C, Kauffmann P, Klocke F. Design for PM: Challenges and Opportunities for Powder Metal Components in Transmission Technology Procedia Cirp. 70: 186-191. DOI: 10.1016/J.Procir.2018.03.267  0.361
2018 Klocke F, Herrig T, Zeis M, Klink A. Experimental Investigations of Cutting Rates and Surface Integrity in Wire Electrochemical Machining with Rotating Electrode Procedia Cirp. 68: 725-730. DOI: 10.1016/J.Procir.2017.12.145  0.497
2018 Li HY, Klocke F, Zeis M, Herrig T, Heidemanns L. Experimental Study on the ECM and PECM of Pressed and Casted γ-TiAl Alloys for Aero Engine Applications Procedia Cirp. 68: 768-771. DOI: 10.1016/J.Procir.2017.12.135  0.436
2018 Klocke F, Schreiner T, Schüler M, Zeis M. Material Removal Simulation for Abrasive Water Jet Milling Procedia Cirp. 68: 541-546. DOI: 10.1016/J.Procir.2017.12.110  0.392
2018 Klocke F, Harst S, Zeis M, Klink A. Modeling and Simulation of the Microstructure Evolution of 42CrMo4 Steel During Electrochemical Machining Procedia Cirp. 68: 505-510. DOI: 10.1016/J.Procir.2017.12.082  0.482
2018 Klocke F, Heidemanns L, Zeis M, Klink A. A Novel Modeling Approach for the Simulation of Precise Electrochemical Machining (PECM) with Pulsed Current and Oscillating Cathode Procedia Cirp. 68: 499-504. DOI: 10.1016/J.Procir.2017.12.081  0.42
2018 Klocke F, Chrubasik L, Klink A, Hensgen L. Analysis of Fundamental Process Characteristics for Sinking-EDM of Cemented Carbides as a Function of Polarity Procedia Cirp. 68: 313-318. DOI: 10.1016/J.Procir.2017.12.070  0.479
2018 Klocke F, Schneider S, Frauenknecht B, Hensgen L, Klink A, Oßwald K. Thermographic Analysis of Spark Location Distribution in Sinking EDM Procedia Cirp. 68: 280-285. DOI: 10.1016/J.Procir.2017.12.064  0.383
2018 Klocke F, Mohammadnejad M, Zeis M, Klink A. Investigation on the Variability of Existing Models for Simulation of Local Temperature Field during a Single Discharge for Electrical Discharge Machining (EDM) Procedia Cirp. 68: 260-265. DOI: 10.1016/J.Procir.2017.12.059  0.374
2018 Klocke F, Mohammadnejad M, Holsten M, Ehle L, Zeis M, Klink A. A Comparative Study of Polarity-related Effects in Single Discharge EDM of Titanium and Iron Alloys Procedia Cirp. 68: 52-57. DOI: 10.1016/J.Procir.2017.12.021  0.41
2018 Gommeringer A, Schmitt-Radloff U, Ninz P, Kern F, Klocke F, Schneider S, Holsten M, Klink A. ED-machinable Ceramics with Oxide Matrix: Influence of Particle Size and Volume Fraction of the Electrical Conductive Phase on the Mechanical and Electrical Properties and the EDM Characteristics Procedia Cirp. 68: 22-27. DOI: 10.1016/J.Procir.2017.12.016  0.385
2018 Schmitt-Radloff U, Gommeringer A, Assmuth P, Kern F, Klocke F, Holsten M, Schneider S. Effects of Composition on Mechanical and ED-machining Characteristics of Zirconia toughened Alumina – Titanium Carbide (ZTA-TiC) Composite Ceramics Procedia Cirp. 68: 17-21. DOI: 10.1016/J.Procir.2017.12.015  0.42
2018 Rego R, Löpenhaus C, Gomes J, Klocke F. Residual stress interaction on gear manufacturing Journal of Materials Processing Technology. 252: 249-258. DOI: 10.1016/J.Jmatprotec.2017.09.017  0.341
2018 Klocke F, Lortz W, Trauth D. Analysis of the dynamic chip formation process in turning International Journal of Mechanical Sciences. 135: 313-324. DOI: 10.1016/J.Ijmecsci.2017.11.035  0.386
2018 Klocke F, Zeis M, Heidemanns L. Fluid structure interaction of thin graphite electrodes during flushing movements in sinking electrical discharge machining Cirp Journal of Manufacturing Science and Technology. 20: 23-28. DOI: 10.1016/J.Cirpj.2017.09.003  0.354
2018 Biermann D, Bleicher F, Heisel U, Klocke F, Möhring H-, Shih A. Deep hole drilling Cirp Annals-Manufacturing Technology. 67: 673-694. DOI: 10.1016/J.Cirp.2018.05.007  0.4
2018 Klocke F, Döbbeler B, Lakner T. Influence of the coolant nozzle orientation and size on the tool temperature under high-pressure coolant supply using an analogy test bench Production Engineering. 12: 473-480. DOI: 10.1007/S11740-018-0823-2  0.388
2018 Prinz S, Trauth D, Mattfeld P, Klocke F. Influence of different grinding wheel and dressing roller specifications on grinding wheel wear Production Engineering. 12: 441-448. DOI: 10.1007/S11740-018-0810-7  0.474
2018 Wirtz C, Trauth DH, Klocke F, Dehmer A, Mattfeld P. Analysis of the grinding wheel wear in dependency of the cemented carbide specification The International Journal of Advanced Manufacturing Technology. 99: 747-754. DOI: 10.1007/S00170-018-2362-6  0.381
2018 Seimann M, Peng B, Fischersworring-Bunk A, Rauch S, Klocke F, Döbbeler B. Model-based analysis in finish broaching of inconel 718 The International Journal of Advanced Manufacturing Technology. 97: 3751-3760. DOI: 10.1007/S00170-018-2221-5  0.493
2018 Thombansen U, Buchholz G, Frank D, Heinisch J, Kemper M, Pullen T, Reimer V, Rotshteyn G, Schwenzer M, Stemmler S, Abel D, Gries T, Hopmann C, Klocke F, Poprawe R, et al. Design framework for model-based self-optimizing manufacturing systems The International Journal of Advanced Manufacturing Technology. 97: 519-528. DOI: 10.1007/S00170-018-1951-8  0.388
2018 Mannens R, Trauth D, Falker J, Brecher C, Klocke F. Analysis of spindle bearing load with regard to the false brinelling effect caused by machine hammer peening The International Journal of Advanced Manufacturing Technology. 95: 3969-3976. DOI: 10.1007/S00170-017-1523-3  0.398
2018 Voigts H, Trauth D, Feuerhack A, Mattfeld P, Klocke F. Dependencies of the die-roll height during fine blanking of case hardening steel 16MnCr5 without V-ring using a nesting strategy: An experimental analysis of the influences of nesting, sheet metal anisotropy, stroke number and part geometry The International Journal of Advanced Manufacturing Technology. 95: 3083-3091. DOI: 10.1007/S00170-017-1313-Y  0.35
2018 Mueller S, Wirtz C, Trauth D, Mattfeld P, Klocke F. Material removal mechanisms in grinding of two-phase brittle materials The International Journal of Advanced Manufacturing Technology. 95: 1-12. DOI: 10.1007/S00170-017-1184-2  0.373
2017 Pothen M, Winands K, Klocke F. Compensation of scanner based inertia for laser structuring processes Journal of Laser Applications. 29: 12017. DOI: 10.2351/1.4974906  0.335
2017 Mueller S, Wirtz C, Trauth D, Klocke F. Plastic Deformability at Micro-Scale of Fiber-Reinforced Ceramics with Porous Matrix during Grinding Procedia Engineering. 207: 119-124. DOI: 10.18154/Rwth-2018-224827  0.314
2017 Augspurger T, Döbbeler B, Klocke F, Lima A, Gierlings S, Brockmann M. Modelling of transient thermal conditions in cutting Journal of Mechanics Engineering and Automation. 65: 113-120. DOI: 10.17265/2159-5275  0.303
2017 Liu G, Vu A, Dambon O, Klocke F. Glass Material Modeling and its Molding Behavior Mrs Advances. 2: 875-885. DOI: 10.1557/Adv.2017.64  0.453
2017 Klocke F, Arntz K, Klingbeil N, Schulz M. Wire-based laser metal deposition for additive manufacturing of TiAl6V4: basic investigations of microstructure and mechanical properties from build up parts Proceedings of Spie. 10095. DOI: 10.1117/12.2251336  0.425
2017 Wirtz C, Mueller S, Mattfeld P, Klocke F. A Discussion on Material Removal Mechanisms in Grinding of Cemented Carbides Journal of Manufacturing Science and Engineering-Transactions of the Asme. 139: 121002. DOI: 10.1115/1.4036995  0.347
2017 Weiß M, Klocke F, Barth S, Rasim M, Mattfeld P. Detailed Analysis And Description Of Grinding Wheel Topographies Journal of Manufacturing Science and Engineering-Transactions of the Asme. 139: 54502. DOI: 10.1115/1.4035531  0.319
2017 Arrizubieta JI, Klocke F, Klingbeil N, Arntz K, Lamikiz A, Martinez S. Evaluation of efficiency and mechanical properties of Inconel 718 components built by wire and powder laser material deposition Rapid Prototyping Journal. 23: 965-972. DOI: 10.1108/Rpj-01-2016-0012  0.424
2017 Peng Z, Rohwerder M, Friedrichs M, Choi P, Gault B, Meiners T, Kreilkamp H, Klocke F, Raabe D. Degradation Mechanism of Molds for Precision Glass Molding Microscopy and Microanalysis. 23: 698-699. DOI: 10.1017/S1431927617004159  0.322
2017 Binder M, Klocke F, Doebbeler B. Abrasive wear behavior under metal cutting conditions Wear. 376: 165-171. DOI: 10.1016/J.Wear.2017.01.065  0.405
2017 Buchkremer S, Klocke F. Compilation of a thermodynamics based process signature for the formation of residual surface stresses in metal cutting Wear. 1156-1163. DOI: 10.1016/J.Wear.2016.11.013  0.359
2017 Binder M, Klocke F, Doebbeler B. An advanced numerical approach on tool wear simulation for tool and process design in metal cutting Simulation Modelling Practice and Theory. 70: 65-82. DOI: 10.1016/J.Simpat.2016.09.001  0.44
2017 Klocke F, Döbbeler B, Goetz S, Chandra D. Data Synchronization for Model-Based Process Monitoring Procedia Manufacturing. 14: 136-142. DOI: 10.1016/J.Promfg.2017.11.016  0.362
2017 Döbbeler B, Klocke F. Process Oriented Choice of Lubricant Pressure and Volume Flow to Increase Machining Process Efficiency Procedia Manufacturing. 8: 361-368. DOI: 10.1016/J.Promfg.2017.02.046  0.386
2017 Hojda S, Sturm KJX, Terhorst M, Klocke F, Hirt GKP. Damage dependent material properties in a Finite Element Simulation of a hybrid forward extrusion process Procedia Engineering. 207: 437-441. DOI: 10.1016/J.Proeng.2017.10.801  0.395
2017 Mannens R, Delforno A, Trauth D, Feuerhack A, Kittel M, Klocke F. Analysis of surface defects on industrial casting tools for automotive applications after machine hammer peening Procedia Engineering. 207: 1141-1146. DOI: 10.1016/J.Proeng.2017.10.1139  0.423
2017 Abouridouane M, Klocke F, Oktafiani A, Döbbeler B. Microstructure-based FEM Simulation of Metal Cutting Procedia Cirp. 58: 85-90. DOI: 10.1016/J.Procir.2017.03.336  0.395
2017 Abouridouane M, Laschet G, Kripak V, Texeira A, Dierdorf J, Prahl U, Klocke F. Cutting Simulations of Two Gear Steels with Microstructure Dependent Material Laws Procedia Cirp. 58: 549-554. DOI: 10.1016/J.Procir.2017.03.332  0.454
2017 Buchkremer S, Klocke F, Döbbeler B, Abouridouane M, Meurer M. Thermodynamics-based Interpretation of White Layer Formation in Metal Cutting☆ Procedia Cirp. 58: 370-374. DOI: 10.1016/J.Procir.2017.03.328  0.399
2017 Gadeschi GB, Schneider S, Mohammadnejad M, Meinke M, Klink A, Schröder W, Klocke F. Numerical Analysis of Flushing-Induced Thermal Cooling Including Debris Transport in Electrical Discharge Machining (EDM) Procedia Cirp. 58: 116-121. DOI: 10.1016/J.Procir.2017.03.325  0.379
2017 Klocke F, Shirobokov A, Kerchnawe S, Wahl M, Mannens R, Feuerhack A, Mattfeld P. Experimental Investigation of the Hole Accuracy, Delamination, and Cutting Force in Piercing of Carbon Fiber Reinforced Plastics Procedia Cirp. 66: 215-220. DOI: 10.1016/J.Procir.2017.03.297  0.418
2017 Klocke F, Döbbeler B, Goetz S, Viek TD. Model-Based Online Tool Monitoring for Hobbing Processes☆ Procedia Cirp. 58: 601-606. DOI: 10.1016/J.Procir.2017.03.271  0.445
2017 Klocke F, Döbbeler B, Peng B, Lakner T. FE-simulation of the Cutting Process under Consideration of Cutting Fluid ☆ Procedia Cirp. 58: 341-346. DOI: 10.1016/J.Procir.2017.03.235  0.34
2017 Klocke F, Harst S, Karges F, Zeis M, Klink A. Modeling of the Electrochemical Dissolution Process for a Two-phase Material in a Passivating Electrolyte System☆ Procedia Cirp. 58: 169-174. DOI: 10.1016/J.Procir.2017.03.214  0.442
2017 Abouridouane M, Klocke F, Döbbeler B. Characterisation and Modelling of the Machinability of Ferritic-pearlitic Steels in Drilling Operations☆ Procedia Cirp. 58: 79-84. DOI: 10.1016/J.Procir.2017.03.197  0.48
2017 Klocke F, Schneider S, Mohammadnejad M, Hensgen L, Klink A. Inverse Simulation of Heat Source in Electrical Discharge Machining (EDM) Procedia Cirp. 58: 1-6. DOI: 10.1016/J.Procir.2017.03.178  0.346
2017 Klocke F, Arntz K, Teli M, Winands K, Wegener M, Oliari S. State-of-the-art Laser Additive Manufacturing for Hot-work Tool Steels Procedia Cirp. 63: 58-63. DOI: 10.1016/J.Procir.2017.03.073  0.472
2017 Klocke F, Brecher C, Löpenhaus C, Mazak J. Describing and Evaluating Deviations for Bevel Gear Flanks Procedia Cirp. 62: 221-226. DOI: 10.1016/J.Procir.2016.06.045  0.421
2017 Brecher C, Klocke F, Löpenhaus C, Hübner F. Analysis of Abrasive Grit Cutting for Generating Gear Grinding Procedia Cirp. 62: 299-304. DOI: 10.1016/J.Procir.2016.06.042  0.445
2017 Rom M, Brakhage K, Barth S, Wrobel C, Mattfeld P, Klocke F. Mathematical modeling of ceramic bond bridges in grinding wheels Mathematics and Computers in Simulation. 147: 220-236. DOI: 10.1016/J.Matcom.2017.02.002  0.373
2017 Arrizubieta JI, Martínez S, Lamikiz A, Ukar E, Arntz K, Klocke F. Instantaneous powder flux regulation system for Laser Metal Deposition Journal of Manufacturing Processes. 29: 242-251. DOI: 10.1016/J.Jmapro.2017.07.018  0.349
2017 Arrizubieta JI, Lamikiz A, Klocke F, Martínez S, Arntz K, Ukar E. Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling International Journal of Heat and Mass Transfer. 115: 80-91. DOI: 10.1016/J.Ijheatmasstransfer.2017.07.011  0.391
2017 Stemmler S, Abel D, Schwenzer M, Adams O, Klocke F. Model Predictive Control for Force Control in Milling Ifac-Papersonline. 50: 15871-15876. DOI: 10.1016/J.Ifacol.2017.08.2336  0.391
2017 Oßwald K, Schneider S, Hensgen L, Klink A, Klocke F. Experimental investigation of energy distribution in continuous sinking EDM Cirp Journal of Manufacturing Science and Technology. 19: 36-43. DOI: 10.1016/J.Cirpj.2017.04.006  0.331
2017 Span J, Koshy P, Klocke F, Müller S, Coelho R. Dynamic jamming in dense suspensions: Surface finishing and edge honing applications Cirp Annals-Manufacturing Technology. 66: 321-324. DOI: 10.1016/J.Cirp.2017.04.082  0.429
2017 Klocke F, Ozhoga-Maslovskaja O, Schongen F, Feuerhack A, Trauth D. Numerical shape optimization of cold forging tools by means of FEM/BEM simulation International Journal of Material Forming. 10: 811-821. DOI: 10.1007/S12289-016-1321-8  0.363
2017 Trauth D, Bastürk S, Hild R, Mattfeld P, Brögelmann T, Bobzin K, Klocke F. Evaluation of the Shear Stresses on Surface Structured Workpieces in Dry Forming using a Novel Pin-On-Cylinder Tribometer with Axial Feed International Journal of Material Forming. 10: 1-9. DOI: 10.1007/S12289-016-1301-Z  0.407
2017 Wirtz C, Mueller S, Trauth D, Mattfeld P, Klocke F. Influence of the cemented carbide specification on the process force and the process temperature in grinding Production Engineering. 11: 633-641. DOI: 10.1007/S11740-017-0766-Z  0.414
2017 Klocke F, Mattfeld P, Stauder J, Müller J, Grünebaum T. Robust technology chain design: considering undesired interactions within the technology chain Production Engineering. 11: 575-585. DOI: 10.1007/S11740-017-0756-1  0.325
2017 Schwenzer M, Adams O, Klocke F, Stemmler S, Abel D. Model-based predictive force control in milling: determination of reference trajectory Production Engineering. 11: 107-115. DOI: 10.1007/S11740-017-0721-Z  0.441
2017 Terhorst M, Ozhoga-Maslovskaja O, Trauth D, Shirobokov A, Mattfeld P, Solf M, Klocke F. Electro-thermo-mechanical contact model for bulk metal forming under application of electrical resistance heating The International Journal of Advanced Manufacturing Technology. 89: 3601-3618. DOI: 10.1007/S00170-016-9315-8  0.383
2017 Buchkremer S, Klocke F. Modeling nanostructural surface modifications in metal cutting by an approach of thermodynamic irreversibility: Derivation and experimental validation Continuum Mechanics and Thermodynamics. 29: 271-289. DOI: 10.1007/S00161-016-0533-Y  0.41
2017 Wu B, Buchkremer S, Münstermann S, Lian J, Veselovac D, Bleck W, Klocke F. Modeling of Chip Breakage in Machining of AISI 1045 Steel by Using an Improved Damage Mechanics Model Steel Research International. 88: 1600338. DOI: 10.1002/Srin.201600338  0.429
2016 Klocke F, Cayli T, Veselovac D. Increasing Productivity and Process Stability in Turning of Aerospace Materials with High Pressure Lubricoolant Supply Materials Science Forum. 48-55. DOI: 10.4028/Www.Scientific.Net/Msf.836-837.48  0.455
2016 Ophey M, Löpenhaus C, Klocke F. Influence of Dressing Tool Specification on Dressing Tool Wear for Generating Gear Grinding Advanced Materials Research. 1140: 228-235. DOI: 10.4028/Www.Scientific.Net/Amr.1140.228  0.46
2016 Kühn F, Löpenhaus C, Klocke F. Further Development of a Cutting Force Model for Gear Hobbing Advanced Materials Research. 1140: 165-172. DOI: 10.4028/Www.Scientific.Net/Amr.1140.165  0.476
2016 Kampka M, Löpenhaus C, Klocke F. Development of a Methodology for Analyzation of the Influence of Pitch Diameter Shift on the Generating Gear Grinding Process Advanced Materials Research. 1140: 149-156. DOI: 10.4028/Www.Scientific.Net/Amr.1140.149  0.469
2016 Hübner F, Löpenhaus C, Klocke F, Brecher C. Extended Calculation Model for Generating Gear Grinding Processes Advanced Materials Research. 1140: 141-148. DOI: 10.4028/Www.Scientific.Net/Amr.1140.141  0.467
2016 Zhang L, Liu G, Zhao X, Dambon O, Klocke F, Yi AY. Precision molding of optics: a review of its development and applications Proceedings of Spie. 9949: 994906. DOI: 10.1117/12.2237968  0.363
2016 Staasmeyer J, Wang Y, Liu G, Dambon O, Klocke F. Precision glass molding of complex shaped chalcogenide glass lenses for IR applications Proceedings of Spie. 9949: 994904. DOI: 10.1117/12.2237752  0.43
2016 Kreilkamp H, Vu AT, Dambon O, Klocke F. Replicative manufacturing of complex lighting optics by non-isothermal glass molding Proceedings of Spie. 9949. DOI: 10.1117/12.2235848  0.395
2016 Vu A, Kreilkamp H, Dambon O, Klocke F. Nonisothermal glass molding for the cost-efficient production of precision freeform optics Optical Engineering. 55: 71207-71207. DOI: 10.1117/1.Oe.55.7.071207  0.429
2016 Buchkremer S, Klocke F, Döbbeler B. Impact of the Heat Treatment Condition of Steel AISI 4140 on Its Frictional Contact Behavior in Dry Metal Cutting Journal of Manufacturing Science and Engineering-Transactions of the Asme. 138: 121006. DOI: 10.1115/1.4033447  0.472
2016 Trauth D, Klocke F, Terhorst M, Mattfeld P. Computational Fluid Dynamics Analysis of a Machine Hammer Peened Surface Structure for Lubricated Sliding Contacts Journal of Tribology-Transactions of the Asme. 138: 21704. DOI: 10.1115/1.4031782  0.352
2016 Klocke F, Nobel C, Veselovac D. Influence of Tool Coating, Tool Material, and Cutting Speed on the Machinability of Low-Leaded Brass Alloys in Turning Materials and Manufacturing Processes. 31: 1895-1903. DOI: 10.1080/10426914.2015.1127944  0.464
2016 Dukwen J, Friedrichs M, Liu G, Tang M, Dambon O, Klocke F. Tribological wear analysis and numerical lifetime prediction of glassy carbon tools in fused silica molding Wear. 364: 144-153. DOI: 10.1016/J.Wear.2016.07.011  0.459
2016 Bobzin K, Brögelmann T, Kruppe NC, Basturk S, Klocke F, Mattfeld P, Trauth D, Hild R. Synthesis, characterization, and tribological evaluation of HPPMS (Cr1 − xAlx)N + MoSy coatings Surface & Coatings Technology. 308: 383-393. DOI: 10.1016/J.Surfcoat.2016.07.089  0.336
2016 Adams O, Klocke F, Schwenzer M, Stemmler S, Abel D. Model-based Predictive Force Control in Milling – System Identification Procedia Technology. 26: 214-220. DOI: 10.1016/J.Protcy.2016.08.029  0.44
2016 Klocke F, Döbbeler B, Goetz S, Staudt J. Online Tool Wear Measurement for Hobbing of Highly Loaded Gears in Geared Turbo Fans Procedia Manufacturing. 6: 9-16. DOI: 10.1016/J.Promfg.2016.11.002  0.454
2016 Klocke F, Stauder J, Mattfeld P, Müller J. Modeling of Manufacturing Technologies During Ramp-up☆ Procedia Cirp. 51: 122-127. DOI: 10.1016/J.Procir.2016.05.098  0.381
2016 Klocke F, Müller J, Mattfeld P, Kukulies J, Stauder J. Integrative Technology and Inspection Planning of Medical Devices Procedia Cirp. 51: 105-110. DOI: 10.1016/J.Procir.2016.05.097  0.352
2016 Klocke F, Brecher C, Löpenhaus C, Ganser P, Staudt J, Krömer M. Technological and Simulative Analysis of Power Skiving Procedia Cirp. 50: 773-778. DOI: 10.1016/J.Procir.2016.05.052  0.446
2016 Klocke F, Döbbeler B, Seimann M. Dry Broaching Using Carbon Free Steel as Tool Material Procedia Cirp. 46: 496-499. DOI: 10.1016/J.Procir.2016.04.076  0.474
2016 Klocke F, Barth S, Mattfeld P. High Performance Grinding Procedia Cirp. 46: 266-271. DOI: 10.1016/J.Procir.2016.04.067  0.497
2016 Klocke F, Barth S, Wrobel C, Weiß M, Mattfeld P, Brakhage K, Rom M. Modelling of the Grinding Wheel Structure Depending on the Volumetric Composition Procedia Cirp. 46: 276-280. DOI: 10.1016/J.Procir.2016.04.066  0.333
2016 Klocke F, Wrobel C, Rasim M, Mattfeld P. Approach of Characterization of the Grinding Wheel Topography as a Contribution to the Energy Modelling of Grinding Processes Procedia Cirp. 46: 631-635. DOI: 10.1016/J.Procir.2016.04.011  0.366
2016 Klocke F, Wirtz C, Mueller S, Mattfeld P. Analysis of the Material Behavior of Cemented Carbides (WC-Co) in Grinding by Single Grain Cutting Tests Procedia Cirp. 46: 209-213. DOI: 10.1016/J.Procir.2016.03.209  0.363
2016 Puls H, Klocke F, Döbbeler B, Peng B. Multiscale Modeling of Thermoelastic Workpiece Deformation in Dry Cutting Procedia Cirp. 46: 27-30. DOI: 10.1016/J.Procir.2016.03.195  0.415
2016 Augspurger T, Brockmann M, Frekers Y, Klocke F, Kneer R. Experimental Investigation of Thermal Boundary Conditions During Metal Cutting Procedia Cirp. 46: 119-122. DOI: 10.1016/J.Procir.2016.03.190  0.326
2016 Sari D, Welling D, Löpenhaus C, Klocke F, Klink A. Adjusting Surface Integrity of Gears Using Wire EDM to Increase the Flank Load Carrying Capacity Procedia Cirp. 45: 295-298. DOI: 10.1016/J.Procir.2016.02.355  0.433
2016 Klocke F, Mohammadnejad M, Zeis M, Klink A. Potentials of the Phase Field Approach for Modeling Modifications in Material Microstructure during Electrical Discharge Machining Procedia Cirp. 42: 703-708. DOI: 10.1016/J.Procir.2016.02.305  0.417
2016 Klocke F, Hensgen L, Klink A, Ehle L, Schwedt A. Structure and Composition of the White Layer in the Wire-EDM Process Procedia Cirp. 42: 673-678. DOI: 10.1016/J.Procir.2016.02.300  0.326
2016 Klocke F, Schneider S, Ehle L, Meyer H, Hensgen L, Klink A. Investigations on Surface Integrity of Heat Treated 42CrMo4 (AISI 4140) Processed by Sinking EDM Procedia Cirp. 42: 580-585. DOI: 10.1016/J.Procir.2016.02.263  0.425
2016 Klocke F, Holsten M, Klink A. Technological and Economic Investigations on the Application of Metal Infiltrated Graphite Electrodes for the Sinking EDM of Cemented Carbides Procedia Cirp. 42: 632-637. DOI: 10.1016/J.Procir.2016.02.261  0.469
2016 Klocke F, Harst S, Zeis M, Klink A. Energetic Analysis of the Anodic Double Layer During Electrochemical Machining of 42CrMo4 Steel Procedia Cirp. 42: 396-401. DOI: 10.1016/J.Procir.2016.02.218  0.355
2016 Klocke F, Herrig T, Zeis M, Holsten M, Klink A. Results of Surface Integrity and Fatigue Study of PECM and PEO Processed γ-TiAl for Turbine Applications Procedia Cirp. 42: 131-136. DOI: 10.1016/J.Procir.2016.02.207  0.493
2016 Klocke F, Döbbeler B, Buchkremer S. On the Applicability of the Concept of Process Signatures to Hard Turning Procedia Cirp. 45: 7-10. DOI: 10.1016/J.Procir.2016.02.171  0.456
2016 Mehrafsun S, Harst S, Hauser O, Eckert S, Klink A, Klocke F, Vollertsen F. Energy-based Analysis of Material Dissolution Behavior for Laser-Chemical and Electrochemical Machining☆ Procedia Cirp. 45: 347-350. DOI: 10.1016/J.Procir.2016.02.128  0.38
2016 Klocke F, Löpenhaus C, Sari D. Process Concepts for Gear Finish Hobbing Procedia Cirp. 41: 875-880. DOI: 10.1016/J.Procir.2015.12.099  0.522
2016 Klocke F, Brecher C, Löpenhaus C, Krömer M. Calculating the Workpiece Quality Using a Hobbing Simulation Procedia Cirp. 41: 687-691. DOI: 10.1016/J.Procir.2015.12.045  0.455
2016 Petruck H, Schlick CM, Stemmler S, Abel D, Adams O, Klocke F. Online Parameter Estimation for Model-Based Force Control in Milling Processes Ifac-Papersonline. 49: 634-639. DOI: 10.1016/J.Ifacol.2016.07.753  0.356
2016 Stemmler S, Abel D, Adams O, Klocke F. Model Predictive Feed Rate Control for a Milling Machine Ifac-Papersonline. 49: 11-16. DOI: 10.1016/J.Ifacol.2016.07.542  0.422
2016 Jawahir IS, Attia H, Biermann D, Duflou J, Klocke F, Meyer D, Newman ST, Pusavec F, Putz M, Rech J, Schulze V, Umbrello D. Cryogenic manufacturing processes Cirp Annals-Manufacturing Technology. 65: 713-736. DOI: 10.1016/J.Cirp.2016.06.007  0.484
2016 Abouridouane M, Klocke F, Döbbeler B. Analytical temperature prediction for cutting steel Cirp Annals-Manufacturing Technology. 65: 77-80. DOI: 10.1016/J.Cirp.2016.04.039  0.455
2016 Trauth D, Klocke F, Welling D, Terhorst M, Mattfeld P, Klink A. Investigation of the surface integrity and fatigue strength of Inconel718 after wire EDM and machine hammer peening International Journal of Material Forming. 9: 635-651. DOI: 10.1007/S12289-015-1249-4  0.445
2016 Klocke F, Shirobokov A, Trauth D, Mattfeld P. Deep rolling of fine blanking punch edges International Journal of Material Forming. 9: 489-498. DOI: 10.1007/S12289-015-1235-X  0.467
2016 Trauth D, Stanke J, Shirobokov A, Mattfeld P, Klocke F. Analysis of the fluid pressure, load capacity, and coefficient of friction of an elliptic machine hammer peened surface structure in hydrodynamic lubrication Production Engineering. 1-12. DOI: 10.1007/S11740-016-0696-1  0.387
2016 Klocke F, Dambon O, Liu G, Dukwen J. Analysis of wear of fused silica moulding using glassy carbon moulds Production Engineering. 10: 367-374. DOI: 10.1007/S11740-016-0681-8  0.442
2016 He P, Li L, Wang F, Dambon O, Klocke F, Flores KM, Yi AY. Bulk metallic glass mold for high volume fabrication of micro optics Microsystem Technologies. 22: 617-623. DOI: 10.1007/S00542-014-2395-1  0.406
2016 Puls H, Klocke F, Veselovac D. FEM-based prediction of heat partition in dry metal cutting of AISI 1045 The International Journal of Advanced Manufacturing Technology. 86: 737-745. DOI: 10.1007/S00170-015-8190-Z  0.436
2016 Klocke F, Dambon O, Rohwerder M, Bernhardt F, Friedrichs M, Merzlikin SV. Model of coating wear degradation in precision glass molding International Journal of Advanced Manufacturing Technology. 1-7. DOI: 10.1007/S00170-015-8005-2  0.383
2016 Priarone PC, Klocke F, Faga MG, Lung D, Settineri L. Tool life and surface integrity when turning titanium aluminides with PCD tools under conventional wet cutting and cryogenic cooling The International Journal of Advanced Manufacturing Technology. 85: 807-816. DOI: 10.1007/S00170-015-7958-5  0.483
2016 Buchkremer S, Klocke F, Veselovac D. 3D FEM simulation of chip breakage in metal cutting The International Journal of Advanced Manufacturing Technology. 82: 645-661. DOI: 10.1007/S00170-015-7383-9  0.353
2016 Bobzin K, Brögelmann T, Basturk S, Klocke F, Mattfeld P, Trauth D, Polcik P, Kolozsvári S. Influence of the Composition on the Properties of (Cr1–xAlx)N/MoySz PVD Coatings † Advanced Engineering Materials. 18: 1036-1043. DOI: 10.1002/Adem.201500499  0.331
2015 Klocke F, Brockmann M, Gierlings S, Veselovac D. Analytical model of temperature distribution in metal cutting based on Potential Theory Mechanical Sciences. 6: 89-94. DOI: 10.5194/Ms-6-89-2015  0.417
2015 Klocke F, Harst S, Ehle L, Zeis M, Klink A. Material Loadings during Electrochemical Machining (ECM) - A First Step for Process Signatures Key Engineering Materials. 695-700. DOI: 10.4028/Www.Scientific.Net/Kem.651-653.695  0.43
2015 Ophey M, Löpenhaus C, Klocke F. Influence of Tool Specification and Machining Parameters on the Wear Behaviour at Generating Gear Grinding Applied Mechanics and Materials. 794: 231-238. DOI: 10.4028/Www.Scientific.Net/Amm.794.231  0.473
2015 Shirobokov A, Kerchnawe S, Terhorst M, Mattfeld P, Klocke F. Blanking of unidirectional carbon fibre reinforced plastics Applied Mechanics and Materials. 794: 223-230. DOI: 10.4028/Www.Scientific.Net/Amm.794.223  0.419
2015 Trauth D, Terhorst M, Mattfeld P, Klocke F. 2D-CFD analysis of the fluid pressure and velocity distribution of experimentally machine hammer peened surface structures in hydrodynamic applications Applied Mechanics and Materials. 794: 174-181. DOI: 10.4028/Www.Scientific.Net/Amm.794.174  0.4
2015 Doetz M, Dambon O, Klocke F, Fähnle O. Influence of coolant on ductile mode processing of binderless nanocrystalline tungsten carbide through ultraprecision diamond turning Proceedings of Spie. 9575. DOI: 10.1117/12.2186989  0.504
2015 Trauth D, Klocke F, Terhorst M, Mattfeld P. Physicochemical Analysis of Machine Hammer Peened Surface Structures for Deep Drawing: Determination of the Work of Adhesion and Spreading Pressure of Lubrication to Surface Structure Journal of Tribology-Transactions of the Asme. 137: 22301. DOI: 10.1115/1.4029199  0.339
2015 Nobel C, Hofmann U, Klocke F, Veselovac D, Puls H. Application of a new, severe-condition friction test method to understand the machining characteristics of Cu-Zn alloys using coated cutting tools Wear. 344: 58-68. DOI: 10.1016/J.Wear.2015.10.016  0.447
2015 Binder M, Klocke F, Lung D. Tool wear simulation of complex shaped coated cutting tools Wear. 330: 600-607. DOI: 10.1016/J.Wear.2015.01.015  0.403
2015 Buchkremer S, Klocke F, Lung D. Finite-element-analysis of the relationship between chip geometry and stress triaxiality distribution in the chip breakage location of metal cutting operations Simulation Modelling Practice and Theory. 55: 10-26. DOI: 10.1016/J.Simpat.2015.03.009  0.444
2015 Arrizubieta JI, Klocke F, Gräfe S, Arntz K, Lamikiz A. Thermal Simulation of Laser-assisted Turning☆ Procedia Engineering. 132: 639-646. DOI: 10.1016/J.Proeng.2015.12.542  0.39
2015 Soler D, Aristimuño PX, Garay A, Arrazola PJ, Klocke F, Veselovac D, Seimann M. Finding Correlations between Tool Life and Fundamental Dry Cutting Tests in Finishing Turning of Steel Procedia Engineering. 132: 615-623. DOI: 10.1016/J.Proeng.2015.12.539  0.327
2015 Klocke F, Holsten M, Welling D, Klink A, Perez R. Influence of Threshold Based Process Control on Sinking EDM of a High Aspect Ratio Geometry in a Gamma Titanium Aluminide Procedia Cirp. 35: 73-78. DOI: 10.1016/J.Procir.2015.08.083  0.484
2015 Klocke F, Schmitt R, Zeis M, Heidemanns L, Kerkhoff J, Heinen D, Klink A. Technological and Economical Assessment of Alternative Process Chains for Blisk Manufacture Procedia Cirp. 35: 67-72. DOI: 10.1016/J.Procir.2015.08.052  0.428
2015 Klocke F, Herrig T, Zeis M, Klink A. Experimental Research on the Electrochemical Machinability of selected γ-TiAl alloys for the Manufacture of Future Aero Engine Components Procedia Cirp. 35: 50-54. DOI: 10.1016/J.Procir.2015.08.050  0.469
2015 Klocke F, Schmitt R, Arntz K, Böckmann MG, Gasser A, Alkhayat M, Kerkhoff J, Klingbeil N, Vollmer T, Wegener M. Investigation and Assessment of Resource Consumption of Process Chains Procedia Cirp. 38: 234-238. DOI: 10.1016/J.Procir.2015.08.018  0.386
2015 Vogtel P, Klocke F, Lung D, Terzi S. Automatic Broaching Tool Design by Technological and Geometrical Optimization Procedia Cirp. 33: 496-501. DOI: 10.1016/J.Procir.2015.06.061  0.398
2015 Klocke F, Brumm M, Weber G. Simulation based design for large module gear machining with indexable inserts Procedia Cirp. 33: 470-475. DOI: 10.1016/J.Procir.2015.06.056  0.501
2015 Klocke F, Lung D, Veselovac D, Buchkremer S. An Analytical Model of the Temperature Distribution in the Chip Breakage Location of Metal Cutting Operations Procedia Cirp. 31: 240-245. DOI: 10.1016/J.Procir.2015.03.090  0.465
2015 Klocke F, Brockmann M, Gierlings S, Veselovac D, Kever D, Roidl B, Schmidt G, Semmler U. Analytical Modelling Methods for Temperature Fields in Metal Cutting Based on Panel Method of Fluid Mechanics Procedia Cirp. 31: 352-356. DOI: 10.1016/J.Procir.2015.03.067  0.366
2015 Abouridouane M, Klocke F, Lung D, Veselovac D. The Mechanics of Cutting: In-situ Measurement and Modelling Procedia Cirp. 31: 246-251. DOI: 10.1016/J.Procir.2015.03.048  0.417
2015 Klocke F, Schneider S, Harst S, Welling D, Klink A. Energy-based Approaches for Multi-scale Modelling of Material Loadings During Electric Discharge Machining (EDM)☆ Procedia Cirp. 31: 191-196. DOI: 10.1016/J.Procir.2015.03.044  0.43
2015 Heeschen D, Klocke F, Arntz K. Life Cycle Oriented Milling Tool Management in Small Scale Production Procedia Cirp. 29: 293-298. DOI: 10.1016/J.Procir.2015.02.048  0.401
2015 Döbbeler B, Klocke F, Lung D. Methodology of Process Oriented Dimensioning of Cooling Lubricant Pressure and Volume Flow for Increasing Energy Efficiency Procedia Cirp. 29: 347-353. DOI: 10.1016/J.Procir.2015.01.025  0.398
2015 Klocke F, Döbbeler B, Lung D. Energy Saving Potentials of High Pressure Lubricoolant Supply Procedia Cirp. 26: 355-360. DOI: 10.1016/J.Procir.2014.07.123  0.339
2015 Rasim M, Mattfeld P, Klocke F. Analysis of the grain shape influence on the chip formation in grinding Journal of Materials Processing Technology. 226: 60-68. DOI: 10.1016/J.Jmatprotec.2015.06.041  0.328
2015 Wilbert AD, Behrens B, Zymla C, Dambon O, Klocke F. Robotic finishing process – An extrusion die case study Cirp Journal of Manufacturing Science and Technology. 11: 45-52. DOI: 10.1016/J.Cirpj.2015.07.002  0.363
2015 Klocke F, Adams O, Auerbach T, Gierlings S, Kamps S, Rekers S, Veselovac D, Eckstein M, Kirchheim A, Blattner M, Thiel R, Kohler D. New concepts of force measurement systems for specific machining processes in aeronautic industry Cirp Journal of Manufacturing Science and Technology. 9: 31-38. DOI: 10.1016/J.Cirpj.2015.01.006  0.478
2015 Klocke F, Soo SL, Karpuschewski B, Webster JA, Novovic D, Elfizy A, Axinte DA, Tönissen S. Abrasive machining of advanced aerospace alloys and composites Cirp Annals - Manufacturing Technology. DOI: 10.1016/J.Cirp.2015.05.004  0.474
2015 Klocke F, Zeis M, Klink A. Interdisciplinary modelling of the electrochemical machining process for engine blades Cirp Annals-Manufacturing Technology. 64: 217-220. DOI: 10.1016/J.Cirp.2015.04.071  0.391
2015 Liu Y, Bobek T, Klocke F. Laser path calculation method on triangulated mesh for repair process on turbine parts Computer-Aided Design. 66: 73-81. DOI: 10.1016/J.Cad.2015.04.009  0.346
2015 Sari D, Klocke F, Löpenhaus C. Gear finish hobbing: potentials of several cutting materials Production Engineering. 9: 367-376. DOI: 10.1007/S11740-015-0626-7  0.467
2015 Klocke F, Spöcker G, Huwer T, Bobek T, Arntz K. Reducing data loss within adaptive process chains in the context of commonly-used CAx systems Production Engineering. 9: 307-316. DOI: 10.1007/S11740-015-0616-9  0.358
2015 Klocke F, Thiermann J, Mattfeld P. Influence of the dressing process on grinding wheel wear Production Engineering. 9: 563-568. DOI: 10.1007/S11740-015-0606-Y  0.421
2015 Klocke F, Arntz K, Heeschen D. Integrative technology chain design for small scale manufacturers Production Engineering. 9: 109-117. DOI: 10.1007/S11740-014-0590-7  0.359
2015 Trauth D, Feuerhack A, Mattfeld P, Klocke F. Analysis of the Velocity Distribution of an Elliptic Surface Structure Manufactured by Machine Hammer Peening Tribology Letters. 60: 19. DOI: 10.1007/S11249-015-0595-1  0.373
2015 Nobel C, Hofmann U, Klocke F, Veselovac D. Experimental investigation of chip formation, flow, and breakage in free orthogonal cutting of copper-zinc alloys International Journal of Advanced Manufacturing Technology. DOI: 10.1007/S00170-015-7749-Z  0.402
2015 Klocke F, Trauth D, Shirobokov A, Mattfeld P. FE-analysis and in situ visualization of pressure-, slip-rate-, and temperature-dependent coefficients of friction for advanced sheet metal forming: development of a novel coupled user subroutine for shell and continuum discretization The International Journal of Advanced Manufacturing Technology. 81: 397-410. DOI: 10.1007/S00170-015-7184-1  0.373
2014 Bulla B, Klocke F, Dambon O. Influence of Ultrasonic Assisted Processing on the Ductility of Binderless Tungsten Carbide Key Engineering Materials. 625: 587-592. DOI: 10.4028/Www.Scientific.Net/Kem.625.587  0.501
2014 Bletek T, Klocke F, Hünten M, Dambon O. Dressing of Grinding Wheels for Ultra Precision Grinding of Diffractive Structures in Tungsten Carbide Molds Key Engineering Materials. 625: 161-166. DOI: 10.4028/Www.Scientific.Net/Kem.625.161  0.402
2014 Klocke F, Schwade M, Klink A. Fundamental Analysis of the Process Conditions during Electro Discharge Machining of Biodegradable Magnesium Key Engineering Materials. 773-780. DOI: 10.4028/Www.Scientific.Net/Kem.611-612.773  0.485
2014 Klocke F, Heinen D, Schongen F, Arntz K, Liu Y, Bäcker V, Feldhaus B. Wear Protection of Deep Drawing Tools by Systematic Optimization of Highly Stressed Surfaces Advanced Materials Research. 907: 439-453. DOI: 10.4028/Www.Scientific.Net/Amr.907.439  0.434
2014 Klocke F, Döbbeler B, Binder M, Lung D. The Ecological Footprint on Product Level in Machining – From the Conceptional Methodology to the Industrial Application Advanced Materials Research. 907: 417-426. DOI: 10.4028/Www.Scientific.Net/Amr.907.417  0.382
2014 Klocke F, Trauth D, Terhorst M, Mattfeld P. Wear Analysis of Tool Surfaces Structured by Machine Hammer Peening for Foil-Free Forming of Stainless Steel Advanced Materials Research. 1018: 317-324. DOI: 10.4028/Www.Scientific.Net/Amr.1018.317  0.455
2014 Döbbeler B, Binder M, Klocke F, Lung D. Ecological evaluation of consumptions in manufacturing within the automotive sector International Journal of Shape Modeling. 3: 269. DOI: 10.1504/Ijsm.2014.065660  0.388
2014 Schwedt A, Hensgen L, Dieckmann J, Klink A, Klocke F, Mayer J. EBSD-Analysis of Microstructural Changes Below Wire-EDMed Surfaces Microscopy and Microanalysis. 20: 1470-1471. DOI: 10.1017/S1431927614009088  0.374
2014 Puls H, Klocke F, Lung D. Experimental investigation on friction under metal cutting conditions Wear. 310: 63-71. DOI: 10.1016/J.Wear.2013.12.020  0.436
2014 Schongen F, Klocke F, Mattfeld P, Rjasanow S, Grzhibovskis R. FEM/BEM Simulation of Cold Forging Process Considering Press-tool-workpiece Interaction☆ Procedia Engineering. 81: 2403-2408. DOI: 10.1016/J.Proeng.2014.10.363  0.469
2014 Klocke F, Brummer CM. Laser-assisted Metal Spinning of Challenging Materials Procedia Engineering. 81: 2385-2390. DOI: 10.1016/J.Proeng.2014.10.338  0.344
2014 Klocke F, Zeis M, Herrig T, Harst S, Klink A. Optical in Situ Measurements and Interdisciplinary Modeling of the Electrochemical Sinking Process of Inconel 718 Procedia Cirp. 24: 114-119. DOI: 10.1016/J.Procir.2014.08.014  0.469
2014 Degen F, Klocke F, Bergs T. Presentation of a Novel “Simultaneous Three Axis Turning” Process for Time and Cost Efficient Machining of Rotational Symmetric Turbomachinery Components Procedia Cirp. 24: 32-37. DOI: 10.1016/J.Procir.2014.08.005  0.453
2014 Klocke F, Holsten M, Hensgen L, Klink A. Experimental Investigations on Sinking-EDM of Seal Slots in Gamma-TiAl☆ Procedia Cirp. 24: 92-96. DOI: 10.1016/J.Procir.2014.07.143  0.49
2014 Klocke F, Welling D, Klink A, Perez R. Quality Assessment through In-process Monitoring of Wire-EDM for Fir Tree Slot Production Procedia Cirp. 24: 97-102. DOI: 10.1016/J.Procir.2014.07.136  0.469
2014 Klocke F, Kampker A, Döbbeler B, Maue A, Schmieder M. Simplified Life Cycle Assessment of a Hybrid Car Body Part Procedia Cirp. 15: 484-489. DOI: 10.1016/J.Procir.2014.06.056  0.367
2014 Stauder J, Buchholz S, Klocke F, Mattfeld P. A New Framework to Evaluate the Process Capability of Production Technologies during Production Ramp-Up Procedia Cirp. 20: 126-131. DOI: 10.1016/J.Procir.2014.05.043  0.351
2014 Brinksmeier E, Klocke F, Lucca DA, Sölter J, Meyer D. Process Signatures – A New Approach to Solve the Inverse Surface Integrity Problem in Machining Processes☆ Procedia Cirp. 13: 429-434. DOI: 10.1016/J.Procir.2014.04.073  0.436
2014 Klocke F, Gierlings S, Brockmann M, Veselovac D. Force-based Temperature Modeling for Surface Integrity Prediction in Broaching Nickel-based Alloys Procedia Cirp. 13: 314-319. DOI: 10.1016/J.Procir.2014.04.053  0.456
2014 Klocke F, Hensgen L, Klink A, Mayer J, Schwedt A. EBSD-Analysis of Flexure Hinges Surface Integrity Evolution via Wire-EDM Main and Trim Cut Technologies☆ Procedia Cirp. 13: 237-242. DOI: 10.1016/J.Procir.2014.04.041  0.376
2014 Klocke F, Blattner M, Adams O, Brockmann M, Veselovac D. Compensation of Disturbances on Force Signals for Five-axis Milling Processes Procedia Cirp. 14: 472-477. DOI: 10.1016/J.Procir.2014.03.098  0.458
2014 Klocke F, Keitzel G, Veselovac D. Innovative Sensor Concept for Chip Transport Monitoring of Gun Drilling Processes Procedia Cirp. 14: 460-465. DOI: 10.1016/J.Procir.2014.03.096  0.385
2014 Bouquet J, Hensgen L, Klink A, Jacobs T, Klocke F, Lauwers B. Fast Production of Gear Prototypes – A Comparison of Technologies☆ Procedia Cirp. 14: 77-82. DOI: 10.1016/J.Procir.2014.03.066  0.432
2014 Vogtel P, Klocke F, Lung D. High Performance Machining of Profiled Slots in Nickel-Based-Superalloys Procedia Cirp. 14: 54-59. DOI: 10.1016/J.Procir.2014.03.061  0.483
2014 Klocke F, Welling D, Klink A, Veselovac D, Nöthe T, Perez R. Evaluation of Advanced Wire-EDM Capabilities for the Manufacture of Fir Tree Slots in Inconel 718 Procedia Cirp. 14: 430-435. DOI: 10.1016/J.Procir.2014.03.039  0.466
2014 Stoney R, Pullen T, Aldwell B, Gierlings S, Brockmann M, Geraghty D, Veselovac D, Klocke F, Donnell GEO. Observations of surface acoustic wave strain and resistive strain measurements on broaching tools for process monitoring Procedia Cirp. 14: 66-71. DOI: 10.1016/J.Procir.2014.03.024  0.362
2014 Nobel C, Klocke F, Lung D, Wolf S. Machinability Enhancement of Lead-free Brass Alloys Procedia Cirp. 14: 95-100. DOI: 10.1016/J.Procir.2014.03.018  0.461
2014 Su L, Wang F, He P, Dambon O, Klocke F, Yi AY. An integrated solution for mold shape modification in precision glass molding to compensate refractive index change and geometric deviation Optics and Lasers in Engineering. 53: 98-103. DOI: 10.1016/J.Optlaseng.2013.08.016  0.339
2014 Totis G, Adams O, Sortino M, Veselovac D, Klocke F. Development of an innovative plate dynamometer for advanced milling and drilling applications Measurement. 49: 164-181. DOI: 10.1016/J.Measurement.2013.11.049  0.435
2014 Buchkremer S, Wu B, Lung D, Münstermann S, Klocke F, Bleck W. FE-simulation of machining processes with a new material model Journal of Materials Processing Technology. 214: 599-611. DOI: 10.1016/J.Jmatprotec.2013.10.014  0.48
2014 Buchkremer S, Klocke F, Lung D. Analytical study on the relationship between chip geometry and equivalent strain distribution on the free surface of chips in metal cutting International Journal of Mechanical Sciences. 85: 88-103. DOI: 10.1016/J.Ijmecsci.2014.05.005  0.404
2014 Tönissen S, Koike R, Kakinuma Y, Aoyama T, Klocke F. Monitoring of tool collision in drilling by disturbance observer Cirp Journal of Manufacturing Science and Technology. 7: 274-282. DOI: 10.1016/J.Cirpj.2014.05.004  0.347
2014 Bouzakis KD, Bouzakis E, Kombogiannis S, Makrimallakis S, Skordaris G, Michailidis N, Charalampous P, Paraskevopoulou R, M'Saoubi R, Aurich JC, Barthelmä F, Biermann D, Denkena B, Dimitrov D, Engin S, ... ... Klocke F, et al. Effect of cutting edge preparation of coated tools on their performance in milling various materials Cirp Journal of Manufacturing Science and Technology. 7: 264-273. DOI: 10.1016/J.Cirpj.2014.05.003  0.444
2014 Krämer A, Klocke F, Sangermann H, Lung D. Influence of the lubricoolant strategy on thermo-mechanical tool load Cirp Journal of Manufacturing Science and Technology. 7: 40-47. DOI: 10.1016/J.Cirpj.2013.09.001  0.448
2014 Klocke F, Klink A, Veselovac D, Aspinwall DK, Soo SL, Schmidt M, Schilp J, Levy G, Kruth JP. Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes Cirp Annals - Manufacturing Technology. 63: 703-726. DOI: 10.1016/J.Cirp.2014.05.004  0.452
2014 Lauwers B, Klocke F, Klink A, Tekkaya AE, Neugebauer R, McIntosh D. Hybrid processes in manufacturing Cirp Annals - Manufacturing Technology. 63: 561-583. DOI: 10.1016/J.Cirp.2014.05.003  0.49
2014 Klocke F, Lung D, Cayli T, Döbbeler B, Sangermann H. Evaluation of energy efficiency in cutting aerospace materials with high-pressure cooling lubricant supply International Journal of Precision Engineering and Manufacturing. 15: 1179-1185. DOI: 10.1007/S12541-014-0454-2  0.438
2014 Klocke F, Buchholz S, Stauder J. Technology chain optimization: a systematic approach considering the manufacturing history Production Engineering. 8: 669-678. DOI: 10.1007/S11740-014-0572-9  0.315
2014 Klocke F, Trauth D, Terhorst M, Mattfeld P. Friction analysis of alternative tribosystems for a foil free forming of stainless steel using strip drawing test: analysis of physicochemical interactions between coatings and lubricants Production Engineering. 8: 593-602. DOI: 10.1007/S11740-014-0560-0  0.453
2014 Gräser E, Hajeck M, Bezold A, Broeckmann C, Brumm M, Klocke F. Optimized density profiles for powder metallurgical gears Production Engineering. 8: 461-468. DOI: 10.1007/S11740-014-0543-1  0.402
2014 Degen F, Klocke F, Bergs T, Ganser P. Comparison of rotational turning and hard turning regarding surface generation Production Engineering. 8: 309-317. DOI: 10.1007/S11740-014-0530-6  0.394
2014 Klocke F, Trauth D, Schongen F, Shirobokov A. Analysis of friction between stainless steel sheets and machine hammer peened structured tool surfaces: experimental and numerical investigation of the lubricated interaction gap Production Engineering. 8: 263-272. DOI: 10.1007/S11740-013-0519-6  0.49
2013 Terhorst M, Klocke F, Niebes S, Schongen F, Mattfeld P. Energy-Efficient Solid Forward Extrusion through Hybridization Based on Process-Integrated Resistance Heating Key Engineering Materials. 620-629. DOI: 10.4028/Www.Scientific.Net/Kem.554-557.620  0.336
2013 Schongen F, Klocke F, Mattfeld P, Rjasanow S, Fleck M, Grzhibovskis R. Time-efficient and precise FEM/BEM simulation of a cold forging process verified by tool load determination Key Engineering Materials. 554: 317-327. DOI: 10.4028/Www.Scientific.Net/Kem.554-557.317  0.448
2013 Klocke F, Lung D, Krämer A, Cayli T, Sangermann H. Potential of Modern Lubricoolant Strategies on Cutting Performance Key Engineering Materials. 2062-2071. DOI: 10.4028/Www.Scientific.Net/Kem.554-557.2062  0.485
2013 Klocke F, Schwade M, Welling D, Kopp A. Multi-scale directed surface topography machined by electro discharge machining in combination with plasma electrolytic conversion for improved osseointegration International Journal of Mechatronics and Manufacturing Systems. 6: 254. DOI: 10.1504/Ijmms.2013.056452  0.394
2013 Waechter D, Dambon O, Klocke F. Analysis and modeling of tribology effects in conventional glass polishing Proceedings of Spie. 8838. DOI: 10.1117/12.2025491  0.425
2013 Klocke F, Lung D, Buchkremer S, Jawahir IS. From orthogonal cutting experiments towards easy-to-implement and accurate flow stress data Materials and Manufacturing Processes. 28: 1222-1227. DOI: 10.1080/10426914.2013.811738  0.464
2013 Klocke F, Settineri L, Lung D, Priarone PC, Arft M. High performance cutting of gamma titanium aluminides: Influence of lubricoolant strategy on tool wear and surface integrity Wear. 302: 1136-1144. DOI: 10.1016/J.Wear.2012.12.035  0.491
2013 Trauth D, Klocke F, Mattfeld P, Klink A. Time-efficient Prediction of the Surface Layer State after Deep Rolling using Similarity Mechanics Approach Procedia Cirp. 9: 29-34. DOI: 10.1016/J.Procir.2013.06.163  0.363
2013 Tönissen S, Klocke F, Mattfeld P, Shirobokov A. Productivity Boundaries of Multi-technology Platforms with two Workspaces☆ Procedia Cirp. 9: 13-17. DOI: 10.1016/J.Procir.2013.06.160  0.353
2013 Vogtel P, Klocke F, Puls H, Buchkremer S, Lung D. Modelling of Process Forces in Broaching Inconel 718 Procedia Cirp. 8: 409-414. DOI: 10.1016/J.Procir.2013.06.125  0.512
2013 Klocke F, Zeis M, Harst S, Klink A, Veselovac D, Baumgärtner M. Modeling and Simulation of the Electrochemical Machining (ECM) Material Removal Process for the Manufacture of Aero Engine Components Procedia Cirp. 8: 265-270. DOI: 10.1016/J.Procir.2013.06.100  0.467
2013 Klocke F, Lung D, Puls H. FEM-Modelling of the Thermal Workpiece Deformation in Dry Turning☆ Procedia Cirp. 8: 240-245. DOI: 10.1016/J.Procir.2013.06.096  0.442
2013 Klocke F, Lung D, Buchkremer S. Inverse Identification of the Constitutive Equation of Inconel 718 and AISI 1045 from FE Machining Simulations Procedia Cirp. 8: 212-217. DOI: 10.1016/J.Procir.2013.06.091  0.47
2013 Abouridouane M, Klocke F, Lung D. Microstructure-based 3D Finite Element Model for Micro Drilling Carbon Steels Procedia Cirp. 8: 94-99. DOI: 10.1016/J.Procir.2013.06.071  0.381
2013 Klocke F, Brumm M, Reimann J. Modeling of surface zone influences in generating gear grinding Procedia Cirp. 8: 21-26. DOI: 10.1016/J.Procir.2013.06.059  0.418
2013 Klocke F, Schwade M, Klink A, Veselovac D. Analysis of Material Removal Rate and Electrode Wear in Sinking EDM Roughing Strategies using Different Graphite Grades Procedia Cirp. 6: 163-167. DOI: 10.1016/J.Procir.2013.03.079  0.393
2013 Klocke F, Garzon M, Braun C, Dieckmann J. Analysis of Sinking EDM Electrode Deflection Measurements for the Manufacturing of High Aspect Ratio Cavities Procedia Cirp. 6: 151-156. DOI: 10.1016/J.Procir.2013.03.075  0.396
2013 Guo YB, Klink A, Klocke F. Multiscale modeling of sinking-EDM with Gaussian heat flux via user subroutine Procedia Cirp. 6: 438-443. DOI: 10.1016/J.Procir.2013.03.047  0.318
2013 Klocke F, Zeis M, Klink A, Veselovac D. Experimental Research on the Electrochemical Machining of Modern Titanium- and Nickel-based Alloys for Aero Engine Components☆ Procedia Cirp. 6: 368-372. DOI: 10.1016/J.Procir.2013.03.040  0.437
2013 Klocke F, Schwade M, Klink A, Veselovac D, Kopp A. Influence of Electro Discharge Machining of Biodegradable Magnesium on the Biocompatibility Procedia Cirp. 5: 88-93. DOI: 10.1016/J.Procir.2013.01.018  0.415
2013 Klocke F, Zeis M, Klink A, Veselovac D. Technological and economical comparison of roughing strategies via milling, sinking-EDM, wire-EDM and ECM for titanium- and nickel-based blisks Cirp Journal of Manufacturing Science and Technology. 6: 198-203. DOI: 10.1016/J.Cirpj.2013.02.008  0.445
2013 Klocke F, Vogtel P, Gierlings S, Lung D, Veselovac D. Broaching of Inconel 718 with cemented carbide Production Engineering. 7: 593-600. DOI: 10.1007/S11740-013-0483-1  0.533
2013 Brecher C, Klocke F, Schindler F, Janssen A, Fischer B, Hermani J. Finishing of polycrystalline diamond tools by combining laser ablation with grinding Production Engineering. 7: 361-371. DOI: 10.1007/S11740-013-0462-6  0.458
2013 Brecher C, Klocke F, Brumm M, Hardjosuwito A. Simulation based model for tool life prediction in bevel gear cutting Production Engineering. 7: 223-231. DOI: 10.1007/S11740-012-0439-X  0.424
2013 Klocke F, Bergs T, Degen F, Ganser P. Presentation of a novel cutting technology for precision machining of hardened, rotationally symmetric parts Production Engineering. 7: 177-184. DOI: 10.1007/S11740-012-0438-Y  0.495
2013 Klocke F, Lung D, Arft M, Priarone PC, Settineri L. On high-speed turning of a third-generation gamma titanium aluminide The International Journal of Advanced Manufacturing Technology. 65: 155-163. DOI: 10.1007/S00170-012-4157-5  0.503
2013 Klocke F, Gerschwiler K, Schiffler M, Morstein M, Dessarzin P, Lung D, Frank H. Adapted DLC coatings for increasing tapping performance in TiAl6V4 Materialwissenschaft Und Werkstofftechnik. 44: 710-715. DOI: 10.1002/Mawe.201300180  0.361
2013 Bernhardt F, Georgiadis K, Dolle L, Dambon O, Klocke F. Development of a ta-C diamond-like carbon (DLC) coating by magnetron sputtering for use in precision glass molding Materialwissenschaft Und Werkstofftechnik. 44: 661-666. DOI: 10.1002/Mawe.201300171  0.304
2012 Klocke F, Gierlings S, Veselovac D. Concept for Temperature Control in Broaching Nickel-Based Alloys Key Engineering Materials. 469-474. DOI: 10.4028/Www.Scientific.Net/Kem.523-524.469  0.495
2012 Bulla B, Klocke F, Dambon O, Hünten M. Influence of Different Steel Alloys on the Machining Results in Ultrasonic Assisted Diamond Turning Key Engineering Materials. 203-208. DOI: 10.4028/Www.Scientific.Net/Kem.523-524.203  0.49
2012 Hünten M, Hollstegge D, Klocke F. Wafer Level Glass Molding Key Engineering Materials. 1001-1005. DOI: 10.4028/Www.Scientific.Net/Kem.523-524.1001  0.381
2012 Bulla B, Klocke F, Dambon O, Hünten M. Ultrasonic Assisted Diamond Turning of Hardened Steel for Mould Manufacturing Key Engineering Materials. 516: 437-442. DOI: 10.4028/Www.Scientific.Net/Kem.516.437  0.477
2012 Hünten M, Klocke F, Dambon O, Bulla B. Ultra Precision Grinding of Wafer Scale Key Engineering Materials. 516: 257-262. DOI: 10.4028/Www.Scientific.Net/Kem.516.257  0.474
2012 Klocke F, Zeis M, Klink A. Technological and Economical Capabilities of Manufacturing Titanium- and Nickel-Based Alloys via Electrochemical Machining (ECM) Key Engineering Materials. 1237-1242. DOI: 10.4028/Www.Scientific.Net/Kem.504-506.1237  0.454
2012 Klocke F, Welling D, Dieckmann J, Veselovac D, Perez R. Developments in Wire-EDM for the Manufacturing of Fir Tree Slots in Turbine Discs Made of Inconel 718 Key Engineering Materials. 1177-1182. DOI: 10.4028/Www.Scientific.Net/Kem.504-506.1177  0.495
2012 Klocke F, Schwade M, Klink A. Development of a Process Evaluation System for Wire-EDM Applications Using an Intelligent Process Monitoring Tool Key Engineering Materials. 1159-1164. DOI: 10.4028/Www.Scientific.Net/Kem.504-506.1159  0.497
2012 Krämer A, Lung D, Klocke F. High Performance Cutting of Aerospace Materials Advanced Materials Research. 498: 127-132. DOI: 10.4028/Www.Scientific.Net/Amr.498.127  0.489
2012 Saxler W, Thimm B, Klocke F, Linke B, Schlütter D. Function-oriented design and testing methods for newly developed ceramic ophthalmic scalpels International Journal of Mechatronics and Manufacturing Systems. 5: 17. DOI: 10.1504/Ijmms.2012.046148  0.716
2012 Waechter D, Kroedel M, Huenten M, Klocke F. Optimization of the process chain for mirrors made of silicon carbide Proceedings of Spie. 8450. DOI: 10.1117/12.927072  0.471
2012 Klocke F, Georgiadis K, Dambon O, Bouzakis KD, Gerardis S, Skordaris G. Complete qualification methodology for coatings of precision glass molding tools Optical Engineering. 51. DOI: 10.1117/1.Oe.51.7.073401  0.411
2012 Klocke F, Veselovac D, Gierlings S, Tamayo LE. Development of process monitoring strategies in broaching of nickel–based alloys Mechanics & Industry. 13: 3-9. DOI: 10.1051/Meca/2011147  0.505
2012 Abouridouane M, Klocke F, Lung D, Adams O. Size Effects in Micro Drilling Ferritic-Pearlitic Carbon Steels Procedia Cirp. 3: 91-96. DOI: 10.1016/J.Procir.2012.07.017  0.366
2012 Klocke F, Zeis M, Klink A, Veselovac D. Technological and Economical Comparison of Roughing Strategies via Milling, EDM and ECM for Titanium- and Nickel-based Blisks Procedia Cirp. 2: 98-101. DOI: 10.1016/J.Procir.2012.05.048  0.434
2012 Tönissen S, Klocke F, Feldhaus B, Buchholz S. A study on throughput time of multi-technology platforms Procedia Cirp. 2: 60-63. DOI: 10.1016/J.Procir.2012.05.040  0.406
2012 Klocke F, Gierlings S, Adams O, Auerbach T, Kamps S, Veselovac D, Eckstein M, Kirchheim A, Blattner M, Thiel R, Kohler D. New Concepts of Force Measurement Systems for Specific Machining Processes in Aeronautic Industry Procedia Cirp. 1: 552-557. DOI: 10.1016/J.Procir.2012.04.098  0.477
2012 Klocke F, Krämer A, Sangermann H, Lung D. Thermo-Mechanical Tool Load during High Performance Cutting of Hard-to-Cut Materials Procedia Cirp. 1: 295-300. DOI: 10.1016/J.Procir.2012.04.053  0.449
2012 Klocke F, Brumm M, Herzhoff S. Influence of Gear Design on Tool Load in Bevel Gear Cutting Procedia Cirp. 1: 66-71. DOI: 10.1016/J.Procir.2012.04.010  0.425
2012 Klocke F, Brecher C, Wegener M, Heinen D, Fischer B, Do-Khac D. Scanner-based Laser Cladding Physics Procedia. 39: 346-353. DOI: 10.1016/J.Phpro.2012.10.047  0.305
2012 Bulla B, Klocke F, Dambon O. Analysis on ductile mode processing of binderless, nano crystalline tungsten carbide through ultra precision diamond turning Journal of Materials Processing Technology. 212: 1022-1029. DOI: 10.1016/J.Jmatprotec.2011.12.010  0.501
2012 Nau B, Roderburg A, Klocke F, Park HS. Risk assessment of hybrid manufacturing technologies for ramp-up projects Cirp Journal of Manufacturing Science and Technology. 5: 228-234. DOI: 10.1016/J.Cirpj.2012.07.007  0.325
2012 Abouridouane M, Klocke F, Lung D, Adams O. A new 3D multiphase FE model for micro cutting ferritic–pearlitic carbon steels Cirp Annals-Manufacturing Technology. 61: 71-74. DOI: 10.1016/J.Cirp.2012.03.075  0.389
2012 Puls H, Klocke F, Lung D. A new experimental methodology to analyse the friction behaviour at the tool-chip interface in metal cutting Production Engineering. 6: 349-354. DOI: 10.1007/S11740-012-0386-6  0.429
2012 Tönissen S, Klocke F, Feldhaus B, Buchholz S, Weiß M. Residual stress prediction in quick point grinding Production Engineering. 6: 243-249. DOI: 10.1007/S11740-012-0382-X  0.335
2012 Tönissen S, Klocke F, Feldhaus B, Buchholz S. Modeling the characteristics of multi-technology platforms Production Engineering. 6: 97-105. DOI: 10.1007/S11740-011-0357-3  0.39
2012 Arft M, Klocke F, Lung D. Evaluation of the Machining Aspects of Austempered Ductile Iron International Journal of Metalcasting. 6: 35-42. DOI: 10.1007/Bf03355537  0.427
2011 Duscha M, Eser A, Klocke F, Broeckmann C, Wegner H, Bezold A. Modeling and Simulation of Phase Transformation during Grinding Advanced Materials Research. 223: 743-753. DOI: 10.4028/Www.Scientific.Net/Amr.223.743  0.395
2011 Linke B, Duscha M, Vu AT, Klocke F. FEM-based simulation of temperature in speed stroke grinding with 3D transient moving heat sources Advanced Materials Research. 223: 733-742. DOI: 10.4028/Www.Scientific.Net/Amr.223.733  0.726
2011 Puls H, Klocke F, Lung D, Schlosser R, Frank P, Herrmann Pratourlon A. FEA-methodology for the prediction of aluminium thin walled part deformation in dry milling operations Advanced Materials Research. 223: 662-670. DOI: 10.4028/Www.Scientific.Net/Amr.223.662  0.413
2011 Klocke F, Gorgels C, Herzhoff S. Tool Load during Multi-Flank Chip Formation Advanced Materials Research. 223: 525-534. DOI: 10.4028/Www.Scientific.Net/Amr.223.525  0.45
2011 Klocke F, Lung D, Essig C. 3D FEM Model for the Prediction of Chip Breakage Advanced Materials Research. 223: 142-151. DOI: 10.4028/Www.Scientific.Net/Amr.223.142  0.361
2011 Klocke F, Abouridouane M, Gerschwiler K, Lung D. 3D Modelling and Simulation of Gun Drilling Advanced Materials Research. 223: 12-19. DOI: 10.4028/Www.Scientific.Net/Amr.223.12  0.442
2011 Klocke F, Kratz S, Auerbach T, Gierlings S, Wirtz G, Veselovac D. Process Monitoring and Control of Machining Operations International Journal of Automation Technology. 5: 403-411. DOI: 10.20965/Ijat.2011.P0403  0.378
2011 Klocke F, Arntz K, Cabral GF, Stolorz M, Busch M. Characterization of Tool Wear in High-Speed Milling of Hardened Powder Metallurgical Steels Advances in Tribology. 2011: 1-13. DOI: 10.1155/2011/906481  0.481
2011 Klocke F, Bergs T, Busch M, Rohde L, Witty M, Cabral GF. Integrated Approach for a Knowledge-Based Process Layout for Simultaneous 5-Axis Milling of Advanced Materials Advances in Tribology. 2011: 1-7. DOI: 10.1155/2011/742360  0.473
2011 Waechter D, Dambon O, Klocke F. Analytical process design for chemo-mechanical polishing of glass aspheres Proceedings of Spie. 8126. DOI: 10.1117/12.893300  0.456
2011 Klocke F, Georgiadis K, Dambon O, Bouzakis K-, Gerardis S, Skordaris G. A complete qualification methodology for coatings of precision glass molding tools Proceedings of Spie. 8126. DOI: 10.1117/12.892802  0.368
2011 He P, Wang F, Li L, Georgiadis K, Dambon O, Klocke F, Yi AY. Development of a low cost high precision fabrication process for glass hybrid aspherical diffractive lenses Journal of Optics. 13: 085703. DOI: 10.1088/2040-8978/13/8/085703  0.402
2011 Li L, He P, Wang F, Georgiadis K, Dambon O, Klocke F, Yi AY. A hybrid polymer–glass achromatic microlens array fabricated by compression molding Journal of Optics. 13: 055407. DOI: 10.1088/2040-8978/13/5/055407  0.383
2011 Bouzakis K-, Klocke F, Skordaris G, Bouzakis E, Gerardis S, Katirtzoglou G, Makrimallakis S. Influence of dry micro-blasting grain quality on wear behaviour of TiAlN coated tools Wear. 271: 783-791. DOI: 10.1016/J.Wear.2011.03.010  0.38
2011 Klocke F, Bouzakis K-, Georgiadis K, Gerardis S, Skordaris G, Pappa M. Adhesive interlayers' effect on the entire structure strength of glass molding tools' Pt–Ir coatings by nano-tests determined Surface & Coatings Technology. 206: 1867-1872. DOI: 10.1016/J.Surfcoat.2011.07.060  0.395
2011 Yi A, Tao B, Klocke F, Dambon O, Wang F. Residual stresses in glass after molding and its influence on optical properties Procedia Engineering. 19: 402-406. DOI: 10.1016/J.Proeng.2011.11.132  0.393
2011 Klocke F, Gierlings S, Brockmann M, Veselovac D. Influence of Temperature on Surface Integrity for Typical Machining Processes in Aero Engine Manufacture Procedia Engineering. 19: 203-208. DOI: 10.1016/J.Proeng.2011.11.102  0.462
2011 Klocke F, Gorgels C, Stuckenberg A. Investigations on Surface Defects in Gear Hobbing Procedia Engineering. 19: 196-202. DOI: 10.1016/J.Proeng.2011.11.101  0.404
2011 Klocke F, Schwade M, Klink A, Kopp A. EDM Machining Capabilities of Magnesium (Mg) Alloy WE43 for Medical Applications Procedia Engineering. 19: 190-195. DOI: 10.1016/J.Proeng.2011.11.100  0.449
2011 Klocke F, Welling D, Dieckmann J. Comparison of Grinding and Wire EDM Concerning Fatigue Strength and Surface Integrity of Machined Ti6Al4V Components Procedia Engineering. 19: 184-189. DOI: 10.1016/J.Proeng.2011.11.099  0.429
2011 Klink A, Guo YB, Klocke F. Surface integrity evolution of powder metallurgical tool steel by main cut and finishing trim cuts in wire-EDM Procedia Engineering. 19: 178-183. DOI: 10.1016/J.Proeng.2011.11.098  0.418
2011 Brinksmeier E, Gläbe R, Klocke F, Lucca DA. Process Signatures – an Alternative Approach to Predicting Functional Workpiece Properties Procedia Engineering. 19: 44-52. DOI: 10.1016/J.Proeng.2011.11.078  0.445
2011 Klocke F, Roderburg A, Zeppenfeld C. Design methodology for hybrid production processes Procedia Engineering. 9: 417-430. DOI: 10.1016/J.Proeng.2011.03.130  0.393
2011 Roderburg A, Klocke F, Koshy P. Principles of technology evolutions for manufacturing process design Procedia Engineering. 9: 294-310. DOI: 10.1016/J.Proeng.2011.03.120  0.378
2011 Koshy P, Grandy D, Klocke F. Pneumatic non-contact topography characterization of finish-ground surfaces using multivariate projection methods Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 35: 282-288. DOI: 10.1016/J.Precisioneng.2010.11.001  0.32
2011 Klocke F, Brecher C, Zunke R, Tuecks R. Corrective polishing of complex ceramics geometries Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 35: 258-261. DOI: 10.1016/J.Precisioneng.2010.10.001  0.503
2011 Nau B, Roderburg A, Klocke F. Ramp-up of hybrid manufacturing technologies Cirp Journal of Manufacturing Science and Technology. 4: 313-316. DOI: 10.1016/J.Cirpj.2011.04.003  0.372
2011 Neugebauer R, Bouzakis K-, Denkena B, Klocke F, Sterzing A, Tekkaya AE, Wertheim R. Velocity effects in metal forming and machining processes Cirp Annals-Manufacturing Technology. 60: 627-650. DOI: 10.1016/J.Cirp.2011.05.001  0.422
2011 Bouzakis K-, Michailidis N, Bouzakis E, Katirtzoglou G, Makrimallakis S, Gerardis S, Pappa M, Klocke F, Schalaster R, Gorgels C. Cutting performance of coated tools with various adhesion strength quantified by inclined impact tests Cirp Annals-Manufacturing Technology. 60: 105-108. DOI: 10.1016/J.Cirp.2011.03.076  0.42
2011 Klocke F, Gorgels C, Weber G, Schalaster R. Prognosis of the local tool wear in gear finish hobbing Production Engineering. 5: 651-657. DOI: 10.1007/S11740-011-0343-9  0.49
2011 Brecher C, Klocke F, Breitbach T, Do-Khac D, Heinen D, Karlberger A, Rosen CJ. A hybrid machining center for enabling new die manufacturing and repair concepts Production Engineering. 5: 405-413. DOI: 10.1007/S11740-011-0323-0  0.449
2011 Klocke F, Dambon O, Behrens B. Analysis of defect mechanisms in polishing of tool steels Production Engineering. 5: 475-483. DOI: 10.1007/S11740-011-0301-6  0.432
2011 Klocke F, Tönissen S, Wegner H, Roderburg A. Modeling economic efficiency of multi-technology platforms Production Engineering. 5: 293-300. DOI: 10.1007/S11740-010-0294-6  0.361
2011 Klocke F, Garzón M, Dieckmann J, Klink A. Process force analysis on sinking-EDM electrodes for the precision manufacturing Production Engineering. 5: 183-190. DOI: 10.1007/S11740-010-0292-8  0.404
2010 Klocke F, Dambon O, Georgiadis K. Comparison of Nitride and Noble Metal Coatings for Precision Glass Molding Tools Key Engineering Materials. 438: 9-16. DOI: 10.4028/Www.Scientific.Net/Kem.438.9  0.41
2010 Bobzin K, Klocke F, Bagcivan N, Ewering M, Georgiadis K, Münstermann T. Impact Behaviour of PtIr-Based Coatings with Different Interlayers for Glass Lens Moulding Key Engineering Materials. 438: 57-64. DOI: 10.4028/Www.Scientific.Net/Kem.438.57  0.335
2010 Klocke F, Gorgels C, Stuckenberg A, Bouzakis E. Qualification of Coatings to Predict Wear Behavior of Micro Blasted Cutting Tools Key Engineering Materials. 438: 23-29. DOI: 10.4028/Www.Scientific.Net/Kem.438.23  0.389
2010 Klocke F, Cordes SE, Gerschwiler K. Performance of y-Al2O3-based coatings and environmentally friendly lubricants in cutting operations of difficult-to-machine materials Key Engineering Materials. 438: 203-209. DOI: 10.4028/Www.Scientific.Net/Kem.438.203  0.472
2010 Michailidis N, Bouzakis KD, Klocke F, Witty M, Lili E, Gerardis S, Pappa M. Evaluation of PVD Coated Tools’ Life in Milling Ti6Al4V, Based on Impact Tests at Ambient and Elevated Temperatures Key Engineering Materials. 438: 187-194. DOI: 10.4028/Www.Scientific.Net/Kem.438.187  0.404
2010 Totis G, Wirtz G, Sortino M, Veselovac D, Kuljanić E, Klocke F. Development of a dynamometer for measuring individual cutting edge forces in face milling Mechanical Systems and Signal Processing. 24: 1844-1857. DOI: 10.1016/J.Ymssp.2010.02.010  0.391
2010 Fischbach KD, Georgiadis K, Wang F, Dambon O, Klocke F, Chen Y, Yi AY. Investigation of the effects of process parameters on the glass-to-mold sticking force during precision glass molding Surface and Coatings Technology. 205: 312-319. DOI: 10.1016/J.Surfcoat.2010.06.049  0.439
2010 Klocke F, Brecher C, Heinen D, Rosen CJ, Breitbach T. Flexible scanner-based laser surface treatment Physics Procedia. 5: 467-475. DOI: 10.1016/J.Phpro.2010.08.169  0.359
2010 Linke B, Klocke F. Temperatures and wear mechanisms in dressing of vitrified bonded grinding wheels International Journal of Machine Tools & Manufacture. 50: 552-558. DOI: 10.1016/J.Ijmachtools.2010.03.002  0.688
2010 Brinksmeier E, Mutlugünes Y, Klocke F, Aurich JC, Shore P, Ohmori H. Ultra-precision grinding Cirp Annals-Manufacturing Technology. 59: 652-671. DOI: 10.1016/J.Cirp.2010.05.001  0.487
2010 Klocke F, Rizzuti S, Frank P, Gerschwiler K, Lung D, Settineri L. Experimental and numerical investigation on the delamination behaviour of PVD-coated tools in turning of austenitic steel International Journal of Material Forming. 3: 435-438. DOI: 10.1007/S12289-010-0800-6  0.421
2010 Klocke F, Linke B, Schluetter D. Development of a reliable grinding procedure for ceramic medical instruments Production Engineering. 4: 571-579. DOI: 10.1007/S11740-010-0257-Y  0.737
2010 Klocke F, Michailidis N, Bouzakis K-, Witty M, Gerardis S, Lili E, Pappa M. Investigation of coated tools’ cutting performance in milling Ti6Al4V and its correlation to the temperature dependent impact resistance of the film Production Engineering. 4: 509-514. DOI: 10.1007/S11740-010-0235-4  0.395
2010 Klocke F, Arft M, Lung D. Material-related aspects of the machinability of Austempered Ductile Iron Production Engineering. 4: 433-441. DOI: 10.1007/S11740-010-0227-4  0.416
2010 Gopalsamy BM, Mondal B, Ghosh S, Arntz K, Klocke F. Experimental investigations while hard machining of DIEVAR tool steel (50 HRC) The International Journal of Advanced Manufacturing Technology. 51: 853-869. DOI: 10.1007/S00170-010-2688-1  0.494
2009 Klocke F, Veselovac D, Gierlings S. Time and Cost Reduction in Evaluation Processes for New Parameters in Manufacturing Processes Sae International Journal of Aerospace. 2: 171-175. DOI: 10.4271/2009-01-3197  0.362
2009 Dambon O, Wang F, Klocke F, Pongs G, Bresseler B, Chen Y, Yi AY. Efficient mold manufacturing for precision glass molding Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures. 27: 1445. DOI: 10.1116/1.3056171  0.457
2009 Wang F, Chen Y, Klocke F, Pongs G, Yi AY. Numerical Simulation Assisted Curve Compensation in Compression Molding of High Precision Aspherical Glass Lenses Journal of Manufacturing Science and Engineering. 131. DOI: 10.1115/1.3063652  0.425
2009 Bouzakis K-, Gerardis S, Skordaris G, Katirtzoglou G, Makrimallakis S, Klocke F, Bouzakis E. Effect of dry micro-blasting on PVD-film properties, cutting edge geometry and tool life in milling Surface & Coatings Technology. 204: 1081-1086. DOI: 10.1016/J.Surfcoat.2009.07.018  0.417
2009 Bobzin K, Bagcivan N, Immich P, Warnke C, Klocke F, Zeppenfeld C, Mattfeld P. Advancement of a nanolaminated TiHfN/CrN PVD tool coating by a nano-structured CrN top layer in interaction with a biodegradable lubricant for green metal forming Surface & Coatings Technology. 203: 3184-3188. DOI: 10.1016/J.Surfcoat.2009.03.053  0.407
2009 Bouzakis K-, Skordaris G, Klocke F, Bouzakis E. A FEM-based analytical―experimental method for determining strength properties gradation in coatings after micro-blasting Surface & Coatings Technology. 203: 2946-2953. DOI: 10.1016/J.Surfcoat.2009.03.012  0.374
2009 Klocke F, Dambon O, Schneider U, Zunke R, Waechter D. Computer-based monitoring of the polishing processes using LabView Journal of Materials Processing Technology. 209: 6039-6047. DOI: 10.1016/J.Jmatprotec.2009.08.014  0.392
2009 Grandy D, Koshy P, Klocke F. Pneumatic Non-Contact Roughness Assessment of Moving Surfaces Cirp Annals-Manufacturing Technology. 58: 515-518. DOI: 10.1016/J.Cirp.2009.03.121  0.391
2009 Klocke F, Zunke R. Removal mechanisms in polishing of silicon based advanced ceramics Cirp Annals-Manufacturing Technology. 58: 491-494. DOI: 10.1016/J.Cirp.2009.03.120  0.408
2009 Gopalsamy BM, Mondal B, Ghosh S, Arntz K, Klocke F. Investigations on hard machining of Impax Hi Hard tool steel International Journal of Material Forming. 2: 145-165. DOI: 10.1007/S12289-009-0400-5  0.496
2009 Klocke F, Bäcker V, Wegner H, Feldhaus B, Baron H, Hessert R. Influence of process and geometry parameters on the surface layer state after roller burnishing of IN718 Production Engineering. 3: 391-399. DOI: 10.1007/S11740-009-0182-0  0.366
2009 Klocke F, Gorgels C, Bouzakis E, Stuckenberg A. Tool life increase of coated carbide tools by micro blasting Production Engineering. 3: 453-459. DOI: 10.1007/S11740-009-0173-1  0.399
2009 Klocke F, Gorgels C, Vasiliou V. Analysis of the influence of gear dimensions on cutting speed and contact conditions during the gear honing process Production Engineering. 3: 255-259. DOI: 10.1007/S11740-009-0165-1  0.449
2009 Klocke F, Gerschwiler K, Abouridouane M. Size effects of micro drilling in steel Production Engineering. 3: 69-72. DOI: 10.1007/S11740-008-0144-Y  0.423
2009 Aurich JC, Biermann D, Blum H, Brecher C, Carstensen C, Denkena B, Klocke F, Kröger M, Steinmann P, Weinert K. Modelling and simulation of process: machine interaction in grinding Production Engineering. 3: 111-120. DOI: 10.1007/S11740-008-0137-X  0.477
2008 Su L, Chen Y, Yi AY, Klocke F, Pongs G. Refractive index variation in compression molding of precision glass optical components. Applied Optics. 47: 1662-7. PMID 18382598 DOI: 10.1364/Ao.47.001662  0.312
2008 Brecher C, Klocke F, Schröder T, Rütjes U. Analysis and Simulation of Different Manufacturing Processes for Bevel Gear Cutting Journal of Advanced Mechanical Design Systems and Manufacturing. 2: 165-172. DOI: 10.1299/Jamdsm.2.165  0.429
2008 Chen Y, Yi AY, Su L, Klocke F, Pongs G. Numerical Simulation and Experimental Study of Residual Stresses in Compression Molding of Precision Glass Optical Components Journal of Manufacturing Science and Engineering. 130. DOI: 10.1115/1.2950062  0.325
2008 Chen Y, Yi AY, Yao D, Klocke F, Pongs G. A reflow process for glass microlens array fabrication by use of precision compression molding Journal of Micromechanics and Microengineering. 18: 055022. DOI: 10.1088/0960-1317/18/5/055022  0.393
2008 Klocke F, Kratz S, Veselovac D. Position-oriented process monitoring in freeform milling Cirp Journal of Manufacturing Science and Technology. 1: 103-107. DOI: 10.1016/J.Cirpj.2008.09.003  0.458
2008 Klocke F, Linke B. Mechanisms in the generation of grinding wheel topography by dressing Production Engineering. 2: 157-163. DOI: 10.1007/S11740-008-0101-9  0.718
2008 Klocke F, Dambon O, Zunke R. Modeling of contact behavior between polishing pad and workpiece surface Production Engineering. 2: 9-14. DOI: 10.1007/S11740-007-0059-Z  0.365
2008 Klocke F, Gerschwiler K, Cordes SE, Fritsch R. Analyses of the performance potential of oxidic PVD wear-protection coatings on cutting tools using the example of crystalline γ-Al 2O3 Advanced Engineering Materials. 10: 622-627. DOI: 10.1002/Adem.200800064  0.401
2007 Klocke F, Zeppenfeld C, Nachmani Z. Advanced grinding of titanium aluminides International Journal of Manufacturing Technology and Management. 12: 60-71. DOI: 10.1504/Ijmtm.2007.014142  0.394
2007 Klocke F, Schroeder T, Bouzakis E, Klein A. Manipulation of coating and subsurface properties in reconditioning of WC–Co carbide cutting tools Surface & Coatings Technology. 202: 1194-1198. DOI: 10.1016/J.Surfcoat.2007.06.023  0.416
2007 Kruth J, Levy G, Klöcke F, Childs T. Consolidation phenomena in laser and powder-bed based layered manufacturing Cirp Annals-Manufacturing Technology. 56: 730-759. DOI: 10.1016/J.Cirp.2007.10.004  0.431
2007 Klocke F, Klöpper C, Lung D, Essig C. Fundamental Wear Mechanisms when Machining Austempered Ductile Iron (ADI) Cirp Annals-Manufacturing Technology. 56: 73-76. DOI: 10.1016/J.Cirp.2007.05.020  0.451
2007 Klocke F, Derichs C, Ader C, Demmer A. Investigations on laser sintering of ceramic slurries Production Engineering. 1: 279-284. DOI: 10.1007/S11740-007-0047-3  0.343
2007 Klocke F, Feldhaus B, Mader S. Development of an incremental rolling process for the production of defined riblet surface structures Production Engineering. 1: 233-237. DOI: 10.1007/S11740-007-0031-Y  0.4
2007 Klocke F, Willms H. Methodology to describe the influence of manufacturing processes on the part functionality Production Engineering. 1: 163-168. DOI: 10.1007/S11740-007-0014-Z  0.401
2007 Klocke F, Klink A, Schneider U. Electrochemical oxidation analysis for dressing bronze-bonded diamond grinding wheels Production Engineering. 1: 141-148. DOI: 10.1007/S11740-007-0008-X  0.349
2007 Klocke F, Schröder T, Kauffmann P. Fundamental study of surface densification of PM gears by rolling using FE analysis Production Engineering. 1: 113-120. DOI: 10.1007/S11740-007-0006-Z  0.445
2007 Reynolds P, Block V, Essel I, Klocke F. Alternatives to Lead as a Machinability Enhancer in Free Cutting Steels Steel Research International. 78: 908-914. DOI: 10.1002/Srin.200706305  0.422
2007 Brecher C, Klocke F, Frank P, Witt S. Integrated Simulation of Machine Tool and Process Interaction for Turning Steel Research International. 78: 831-838. DOI: 10.1002/Srin.200706293  0.424
2007 Bobzin K, Lugscheider E, Nickel R, Immich P, Bolz S, Klocke F, Gerschwiler K. Pulsed Nanocomposite TiAlN Coatings on Complex Shaped Tools for High Performance Cutting Operations Plasma Processes and Polymers. 4. DOI: 10.1002/Ppap.200731703  0.419
2007 Klocke F, Pähler D, Schippers C, Schmidt C. Green Machining of Aluminum Oxide Ceramics Ceramic Materials and Components For Engines. 371-376. DOI: 10.1002/9783527612765.Ch61  0.342
2006 Yi AY, Huang C, Klocke F, Brecher C, Pongs G, Winterschladen M, Demmer A, Lange S, Bergs T, Merz M, Niehaus F. Development of a compression molding process for three-dimensional tailored free-form glass optics. Applied Optics. 45: 6511-8. PMID 16912790 DOI: 10.1364/Ao.45.006511  0.415
2006 Yi AY, Chen Y, Klocke F, Pongs G, Demmer A, Grewell D, Benatar A. A high volume precision compression molding process of glass diffractive optics by use of a micromachined fused silica wafer mold and low Tg optical glass Journal of Micromechanics and Microengineering. 16: 2000-2005. DOI: 10.1088/0960-1317/16/10/012  0.386
2006 Lazoglu I, Buyukhatipoglu K, Kratz H, Klocke F. FORCES AND TEMPERATURES IN HARD TURNING Machining Science and Technology. 10: 157-179. DOI: 10.1080/10910340600713554  0.495
2006 Zeppenfeld C, Klocke F. Speed Stroke Grinding of γ-Titanium Aluminides Cirp Annals. 55: 333-338. DOI: 10.1016/S0007-8506(07)60429-6  0.439
2006 Klocke F, Maßmann T, Bobzin K, Lugscheider E, Bagcivan N. Carbon based tool coatings as an approach for environmentally friendly metal forming processes Wear. 260: 287-295. DOI: 10.1016/J.Wear.2005.04.026  0.395
2006 Klocke F, Gerschwiler K, Fritsch R, Lung D. PVD-coated tools and native ester – an advanced system for environmentally friendly machining Surface & Coatings Technology. 201: 4389-4394. DOI: 10.1016/J.Surfcoat.2006.08.089  0.398
2006 Brinksmeier E, Aurich JC, Govekar E, Heinzel C, Hoffmeister H-, Klocke F, Peters J, Rentsch R, Stephenson DJ, Uhlmann E, Weinert K, Wittmann M. Advances in Modeling and Simulation of Grinding Processes Cirp Annals-Manufacturing Technology. 55: 667-696. DOI: 10.1016/J.Cirp.2006.10.003  0.398
2006 Mayer J, Engelhorn R, Bot R, Weirich T, Herwartz C, Klocke F. Wear characteristics of second-phase-reinforced sol–gel corundum abrasives Acta Materialia. 54: 3605-3615. DOI: 10.1016/J.Actamat.2006.03.049  0.437
2005 Klocke F, Castell-Codesal A, Donst D. Process Characteristics of Laser Brazing Aluminium Alloys Advanced Materials Research. 135-142. DOI: 10.4028/Www.Scientific.Net/Amr.6-8.135  0.335
2005 Oliveira JFG, Silva EJ, Gomes JJF, Klocke F, Friedrich D. Analysis of Grinding Strategies Applied to Crankshaft Manufacturing Cirp Annals. 54: 269-272. DOI: 10.1016/S0007-8506(07)60100-0  0.368
2005 Klocke F, Kratz H. Advanced Tool Edge Geometry for High Precision Hard Turning Cirp Annals. 54: 47-50. DOI: 10.1016/S0007-8506(07)60046-8  0.504
2005 Klocke F, Brinksmeier E, Weinert K. Capability Profile of Hard Cutting and Grinding Processes Cirp Annals. 54: 22-45. DOI: 10.1016/S0007-8506(07)60018-3  0.495
2005 Klocke F, Maßmann T, Gerschwiler K. Combination of PVD tool coatings and biodegradable lubricants in metal forming and machining Wear. 259: 1197-1206. DOI: 10.1016/J.Wear.2005.01.041  0.416
2005 Klocke F, Dambon O, Filho GGC. Influence of the polishing process on the near-surface zone of hardened and unhardened steel Wear. 258: 1794-1803. DOI: 10.1016/J.Wear.2004.12.015  0.422
2005 Klocke F, Mader S. Fundamentals of the deep rolling of compressor blades for turbo aircraft engines Steel Research International. 76: 229-235. DOI: 10.1002/Srin.200506001  0.413
2004 Klocke F, Demmer A, Heselhaus M. Material removal mechanisms in ultrasonic-assisted diamond turning of brittle materials International Journal of Materials & Product Technology. 20: 231. DOI: 10.1504/Ijmpt.2004.004249  0.457
2004 Müller B, Renz U, Hoppe S, Klocke F. Radiation Thermometry at a High-Speed Turning Process Journal of Manufacturing Science and Engineering-Transactions of the Asme. 126: 488-495. DOI: 10.1115/1.1763188  0.375
2004 Klocke F, Straube AM. Virtual Process Engineering – An approach to integrate VR, FEM, and simulation tools in the manufacturing chain Mecanique & Industries. 5: 199-205. DOI: 10.1051/Meca:2004021  0.427
2004 Lugscheider E, Bobzin K, Piñero C, Klocke F, Massmann T. Development of a superlattice (Ti, Hf, Cr)N coating for cold metal forming applications Surface & Coatings Technology. 177: 616-622. DOI: 10.1016/S0257-8972(03)00935-6  0.411
2004 Bouzakis K-, Skordaris G, Hadjiyiannis S, Asimakopoulos A, Mirisidis J, Michailidis N, Erkens G, Cremer R, Klocke F, Kleinjans M. A nanoindentation based determination of internal stress alterations in PVD films and their cemented carbides substrates induced by recoating procedures and their effect on the cutting performance Thin Solid Films. 447: 264-271. DOI: 10.1016/S0040-6090(03)01063-0  0.429
2004 Klocke F, Friedrich D, Linke B, Nachmani Z. Basics for In-Process Roundness Error Improvement by a Functional Workrest Blade Cirp Annals. 53: 275-280. DOI: 10.1016/S0007-8506(07)60697-0  0.728
2004 Klocke F, Lung D, Thomaidis D, Antonoglou G. Using ultra thin electrodes to produce micro-parts with wire-EDM Journal of Materials Processing Technology. 149: 579-584. DOI: 10.1016/J.Jmatprotec.2003.10.061  0.465
2004 Klocke F, Lung D, Antonoglou G, Thomaidis D. The effects of powder suspended dielectrics on the thermal influenced zone by electrodischarge machining with small discharge energies Journal of Materials Processing Technology. 149: 191-197. DOI: 10.1016/J.Jmatprotec.2003.10.036  0.391
2004 Klocke F, Maßmann T, Grams J. Grundlagenuntersuchungen zum Einsatz umweltverträglicher Tribosysteme beim Zerspanen und in der Kaltumformung Materialwissenschaft Und Werkstofftechnik. 35: 901-909. DOI: 10.1002/Mawe.200400789  0.458
2003 Scheffer C, Kratz H, Heyns PS, Klocke F. Development of a tool wear-monitoring system for hard turning International Journal of Machine Tools & Manufacture. 43: 973-985. DOI: 10.1016/S0890-6955(03)00110-X  0.463
2003 Klocke F, Wagner C. Coalescence Behaviour of Two Metallic Particles as Base Mechanism of Selective Laser Sintering Cirp Annals. 52: 177-180. DOI: 10.1016/S0007-8506(07)60559-9  0.373
2003 Evans C, Paul E, Dornfeld D, Lucca D, Byrne G, Tricard M, Klocke F, Dambon O, Mullany B. Material Removal Mechanisms in Lapping and Polishing Cirp Annals. 52: 611-633. DOI: 10.1016/S0007-8506(07)60207-8  0.653
2002 Klocke F, Beck T, Hoppe S, Krieg T, Müller N, Nöthe T, Raedt H, Sweeney K. Examples of FEM application in manufacturing technology Journal of Materials Processing Technology. 120: 450-457. DOI: 10.1016/S0924-0136(01)01210-9  0.411
2002 Klocke F, Engelhorn R, Mayer J, Weirich T. Micro-Analysis of the Contact Zone of Tribologically Loaded Second-Phase Reinforced Sol-Gel-Abrasives Cirp Annals. 51: 245-250. DOI: 10.1016/S0007-8506(07)61509-1  0.376
2001 Klocke F, Raedt H. Friction in Modeling of Metal Forming Processes International Journal of Forming Processes. 4: 43-55. DOI: 10.3166/Ijfp.4.43-55  0.328
2001 Klocke F, Raedt H-, Hoppe S. 2D-Fem Simulation Of The Orthogonal High Speed Cutting Process Machining Science and Technology. 5: 323-340. DOI: 10.1081/Mst-100108618  0.372
2001 Klocke F, Sweeney K, Raedt H-. Improved tool design for fine blanking through the application of numerical modeling techniques Journal of Materials Processing Technology. 115: 70-75. DOI: 10.1016/S0924-0136(01)00771-3  0.394
2001 Klocke F, Raedt H-. Formulation and testing of optimised coating properties with regard to tribological performance in cold forging and fine blanking applications International Journal of Refractory Metals & Hard Materials. 19: 495-505. DOI: 10.1016/S0263-4368(01)00029-4  0.419
2001 Klocke F, Krieg T, Lugscheider E, Bobzin K. Testing and Design of Tool Coatings with Properties Adapted to the Use of Biodegradable Cutting Fluids Cirp Annals. 50: 57-60. DOI: 10.1016/S0007-8506(07)62070-8  0.36
2000 Klocke F, Baus A, Beck T. Coolant Induced Forces in CBN High Speed Grinding with Shoe Nozzles Cirp Annals. 49: 241-244. DOI: 10.1016/S0007-8506(07)62937-0  0.345
1999 Klocke F, Krieg T. Coated Tools for Metal Cutting – Features and Applications Cirp Annals. 48: 515-525. DOI: 10.1016/S0007-8506(07)63231-4  0.469
1998 Luttervelt CAv, Childs THC, Jawahir IS, Klocke F, Venuvinod PK, Altintas Y, Armarego E, Dornfeld D, Grabec I, Leopold J, Lindstrom B, Lucca D, Obikawa T, Shirakashi, Sato H. Present Situation and Future Trends in Modelling of Machining Operations Progress Report of the CIRP Working Group ‘Modelling of Machining Operations’ Cirp Annals. 47: 587-626. DOI: 10.1016/S0007-8506(07)63244-2  0.604
1998 Klocke F, Krieg T, Gerschwiler K, Fritsch R, Zinkann V, Pöhls M, Eisenblätter G. Improved Cutting Processes with Adapted Coating Systems Cirp Annals. 47: 65-68. DOI: 10.1016/S0007-8506(07)62786-3  0.46
1997 Weck M, Klocke F, Schell H, Rüenauver E. Evaluating alternative production cycles using the extended fuzzy AHP method European Journal of Operational Research. 100: 351-366. DOI: 10.1016/S0377-2217(96)00295-0  0.313
1997 Hoogstrate AM, Van Luttervelt CA, Gosger P, Momber AW, Tönshoff HK, Louis H, Klocke F, Riviere D, Magnusson AC, Gardner J, Rajurkar KP, Kim TJ, Konacevic R, Ryd J, Henning A, et al. Opportunities in abrasive water-jet machining Cirp Annals - Manufacturing Technology. 46: 697-714. DOI: 10.1016/S0007-8506(07)90008-6  0.466
1996 Tönshoff HK, Egger R, Klocke F. Environmental and Safety Aspects of Electrophysical and Electrochemical Processes Cirp Annals. 45: 553-568. DOI: 10.1016/S0007-8506(07)60510-1  0.373
Show low-probability matches.