Year |
Citation |
Score |
2020 |
Oropeza D, Hofmann DC, Williams K, Firdosy S, Bordeenithikasem P, Sokoluk M, Liese M, Liu J, Li X. Welding and Additive Manufacturing with Nanoparticle-Enhanced Aluminum 7075 Wire. Journal of Alloys and Compounds. 834. PMID 32661456 DOI: 10.1016/J.Jallcom.2020.154987 |
0.357 |
|
2020 |
Guan Z, Linsley CS, Hwang I, Yao G, Wu BM, Li X. Novel Zinc / Tungsten Carbide Nanocomposite as Bioabsorbable Implant. Materials Letters. 263. PMID 32647402 DOI: 10.1016/J.Matlet.2019.127282 |
0.342 |
|
2020 |
Pan S, Yuan J, Zhang P, Sokoluk M, Yao G, Li X. Effect of electron concentration on electrical conductivity in in situ Al-TiB2 nanocomposites Applied Physics Letters. 116: 14102. DOI: 10.1063/1.5129817 |
0.35 |
|
2020 |
Pan S, Saso T, Yu N, Sokoluk M, Yao G, Umehara N, Li X. New study on tribological performance of AA7075-TiB2 nanocomposites Tribology International. 152: 106565. DOI: 10.1016/J.Triboint.2020.106565 |
0.306 |
|
2020 |
Guan Z, Yao G, Zeng Y, Li X. Fabrication and Characterization of In Situ Zn-TiB2 Nanocomposite Procedia Manufacturing. 48: 332-337. DOI: 10.1016/J.Promfg.2020.05.055 |
0.403 |
|
2020 |
Pan S, Yao G, Yuan J, Sokoluk M, Li X. Manufacturing of Bulk Al-12Zn-3.7Mg-1Cu Alloy with TiC Nanoparticles Procedia Manufacturing. 48: 325-331. DOI: 10.1016/J.Promfg.2020.05.054 |
0.349 |
|
2020 |
Yao G, Pan S, Cao C, Sokoluk M, Li X. Nanoparticle-enabled phase modification (nano-treating) of CuZrSi pseudo-binary alloy Materialia. 14: 100897. DOI: 10.1016/J.Mtla.2020.100897 |
0.362 |
|
2020 |
Cao C, Yao G, Sokoluk M, Li X. Molten salt-assisted processing of nanoparticle-reinforced Cu Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 785: 139345. DOI: 10.1016/J.Msea.2020.139345 |
0.358 |
|
2020 |
Bahador A, Umeda J, Hamzah E, Yusof F, Li X, Kondoh K. Synergistic strengthening mechanisms of copper matrix composites with TiO2 nanoparticles Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 772: 138797. DOI: 10.1016/J.Msea.2019.138797 |
0.353 |
|
2020 |
Yao G, Cao C, Pan S, Li X. Facile Manufacturing of Bimodal Grained Copper with Nanoparticles Materials Letters. 281: 128606. DOI: 10.1016/J.Matlet.2020.128606 |
0.379 |
|
2020 |
Yao G, Cao C, Pan S, Yuan J, Rosa ID, Li X. Thermally stable ultrafine grained copper induced by CrB/CrB2 microparticles with surface nanofeatures via regular casting Journal of Materials Science & Technology. 58: 55-62. DOI: 10.1016/J.Jmst.2020.03.052 |
0.331 |
|
2020 |
Guan Z, Linsley CS, Pan S, DeBenedetto C, Liu J, Wu BM, Li X. Highly Ductile Zn-2Fe-WC Nanocomposite as Biodegradable Material Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 51: 1-8. DOI: 10.1007/S11661-020-05878-Y |
0.356 |
|
2020 |
Xie X, Deng Y, Peng J, Zheng S, Cao C, Xie W, Li X. Nanoparticle-Reinforced Silica Gels with Enhanced Mechanical Properties and Excellent pH-Sensing Performance Particle & Particle Systems Characterization. 37: 1900404. DOI: 10.1002/Ppsc.201900404 |
0.326 |
|
2019 |
Lin TC, Cao C, Sokoluk M, Jiang L, Wang X, Schoenung JM, Lavernia EJ, Li X. Aluminum with dispersed nanoparticles by laser additive manufacturing. Nature Communications. 10: 4124. PMID 31511518 DOI: 10.1038/S41467-019-12047-2 |
0.417 |
|
2019 |
Cao C, Yao G, Jiang L, Sokoluk M, Wang X, Ciston J, Javadi A, Guan Z, De Rosa I, Xie W, Lavernia EJ, Schoenung JM, Li X. Bulk ultrafine grained/nanocrystalline metals via slow cooling. Science Advances. 5: eaaw2398. PMID 31467973 DOI: 10.1126/Sciadv.Aaw2398 |
0.37 |
|
2019 |
Zuo M, Sokoluk M, Cao C, Yuan J, Zheng S, Li X. Microstructure Control and Performance Evolution of Aluminum Alloy 7075 by Nano-Treating. Scientific Reports. 9: 10671. PMID 31337848 DOI: 10.1038/S41598-019-47182-9 |
0.375 |
|
2019 |
Jiang QG, Cao C, Lin TC, Wu S, Li X. Strong and Tough Glass with Self-Dispersed Nanoparticles via Solidification. Advanced Materials (Deerfield Beach, Fla.). e1901803. PMID 31222850 DOI: 10.1002/Adma.201901803 |
0.346 |
|
2019 |
Sokoluk M, Cao C, Pan S, Li X. Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075. Nature Communications. 10: 98. PMID 30626876 DOI: 10.1038/S41467-018-07989-Y |
0.312 |
|
2019 |
Guan Z, Pan S, Linsley C, Li X. Manufacturing and Characterization of Zn-WC as Potential Biodegradable Material Procedia Manufacturing. 34: 247-251. DOI: 10.1016/J.Promfg.2019.06.146 |
0.402 |
|
2019 |
Pan S, Yao G, Liu J, Li X. Effect of Hot Rolling on Naval Brass/WC Nanocomposite Procedia Manufacturing. 34: 193-196. DOI: 10.1016/J.Promfg.2019.06.138 |
0.384 |
|
2019 |
Cao C, Ling H, Murali N, Li X. In-situ molten salt reaction and incorporation of small (10 nm) TiC nanoparticles into Al Materialia. 7: 100425. DOI: 10.1016/J.Mtla.2019.100425 |
0.388 |
|
2019 |
Pan S, Yao G, Sokoluk M, Guan Z, Li X. Enhanced thermal stability in Cu-40 wt% Zn/WC nanocomposite Materials & Design. 180: 107964. DOI: 10.1016/J.Matdes.2019.107964 |
0.325 |
|
2019 |
Pan S, Sokoluk M, Cao C, Guan Z, Li X. Facile fabrication and enhanced properties of Cu-40 wt% Zn/WC nanocomposite Journal of Alloys and Compounds. 784: 237-243. DOI: 10.1016/J.Jallcom.2019.01.022 |
0.344 |
|
2019 |
Pan S, Guan Z, Yao G, Cao C, Li X. Study on electrical behaviour of copper and its alloys containing dispersed nanoparticles Current Applied Physics. 19: 452-457. DOI: 10.1016/J.Cap.2019.01.016 |
0.392 |
|
2019 |
Hu Z, Cao C, Pozuelo M, Sokoluk M, Yang J, Li X. Microstructure Formation and Micropillar Compression of Al-TiC Nanocomposite Manufactured by Solidification Nanoprocessing Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 4620-4631. DOI: 10.1007/S11661-019-05389-5 |
0.317 |
|
2019 |
Yao G, Cao C, Pan S, Lin T, Sokoluk M, Li X. High-performance copper reinforced with dispersed nanoparticles Journal of Materials Science. 54: 4423-4432. DOI: 10.1007/S10853-018-3152-0 |
0.328 |
|
2018 |
Florián-Algarín D, Marrero R, Li X, Choi H, Suárez OM. Strengthening of Aluminum Wires Treated with A206/Alumina Nanocomposites. Materials (Basel, Switzerland). 11. PMID 29534441 DOI: 10.3390/Ma11030413 |
0.371 |
|
2018 |
Guan Z, Hwang I, Pan S, Li X. Scalable Manufacturing of AgCu40(wt %)–WC Nanocomposite Microwires Journal of Micro and Nano-Manufacturing. 6: 31008. DOI: 10.1115/1.4040558 |
0.305 |
|
2018 |
Hwang I, Guan Z, Li X. Fabrication of Zinc–Tungsten Carbide Nanocomposite Using Cold Compaction Followed by Melting Journal of Manufacturing Science and Engineering-Transactions of the Asme. 140: 84503. DOI: 10.1115/1.4040026 |
0.318 |
|
2018 |
Zhao J, Li X. A Long Wavelength Model for Manufacturing of Continuous Metal Microwires by Thermal Fiber Drawing from a Preform Journal of Micro and Nano-Manufacturing. 6: 11003. DOI: 10.1115/1.4038433 |
0.3 |
|
2018 |
Javadi A, Pan S, Li X. Fabrication of High Strength Al Nanocomposites with Populous TiB2 Nanoparticles Procedia Manufacturing. 26: 629-632. DOI: 10.1016/J.Promfg.2018.07.073 |
0.398 |
|
2018 |
Guan Z, Hwang I, Li X. Highly Concentrated WC Reinforced Ag Matrix Nanocomposite Manufactured by Molten Salt Assisted Stir Casting Procedia Manufacturing. 26: 146-151. DOI: 10.1016/J.Promfg.2018.07.018 |
0.388 |
|
2018 |
Hwang I, Guan Z, Li X. Scalable Manufacturing of Zinc-Tungsten Carbide Nanocomposites Procedia Manufacturing. 26: 140-145. DOI: 10.1016/J.Promfg.2018.07.017 |
0.406 |
|
2018 |
Javadi A, Pan S, Li X. Manufacturing of Al and Mg nanocomposite microparticles Manufacturing Letters. 17: 23-26. DOI: 10.1016/J.Mfglet.2018.08.001 |
0.406 |
|
2018 |
Javadi A, Pan S, Li X. Scalable manufacturing of ultra-strong magnesium nanocomposites Manufacturing Letters. 16: 23-26. DOI: 10.1016/J.Mfglet.2018.03.001 |
0.395 |
|
2018 |
Javadi A, Pan S, Cao C, Yao G, Li X. Facile synthesis of 10 nm surface clean TiB2 nanoparticles Materials Letters. 229: 107-110. DOI: 10.1016/J.Matlet.2018.06.054 |
0.361 |
|
2018 |
Cao C, Liu W, Liu Z, Xu J, Hwang I, De Rosa I, Li X. Scalable manufacturing of immiscible Al Bi alloy by self-assembled nanoparticles Materials & Design. 146: 163-171. DOI: 10.1016/J.Matdes.2018.03.008 |
0.348 |
|
2017 |
Javadi A, Zhao J, Cao C, Pozuelo M, Yang Y, Hwang I, Lin TC, Li X. Stretching Micro Metal Particles into Uniformly Dispersed and Sized Nanoparticles in Polymer. Scientific Reports. 7: 7098. PMID 28769104 DOI: 10.1038/S41598-017-07788-3 |
0.367 |
|
2017 |
Ma C, Chen L, Cao C, Li X. Nanoparticle-induced unusual melting and solidification behaviours of metals. Nature Communications. 8: 14178. PMID 28098147 DOI: 10.1038/Ncomms14178 |
0.403 |
|
2017 |
Cao C, Liu W, Javadi A, Ling H, Li X. Scalable Manufacturing of 10 nm TiC Nanoparticles through Molten Salt Reaction Procedia Manufacturing. 10: 634-640. DOI: 10.1016/J.Promfg.2017.07.066 |
0.369 |
|
2017 |
Javadi A, Cao C, Li X. Manufacturing of Al-TiB2 Nanocomposites by Flux-Assisted Liquid State Processing Procedia Manufacturing. 10: 531-535. DOI: 10.1016/J.Promfg.2017.07.038 |
0.352 |
|
2016 |
Zhao J, Javadi A, Lin T, Hwang I, Yang Y, Guan Z, Li X. Scalable Manufacturing of Metal Nanoparticles by Thermal Fiber Drawing Journal of Micro and Nano-Manufacturing. 4: 41002. DOI: 10.1115/1.4034643 |
0.365 |
|
2016 |
Ma C, Zhao J, Cao C, Lin TC, Li X. Fundamental study on laser interactions with nanoparticles-reinforced metals-part II: Effect of nanoparticles on surface tension, viscosity, and laser melting Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4033446 |
0.383 |
|
2016 |
Ma C, Zhao J, Cao C, Lin TC, Li X. Fundamental study on laser interactions with nanoparticles-reinforced metals part i: Effect of nanoparticles on optical reflectivity, specific heat, and thermal conductivity Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4033392 |
0.381 |
|
2016 |
Cao C, Chen L, Xu J, Choi H, Li X. Strengthening Al-Bi-TiC0.7N0.3 nanocomposites by Cu addition and grain refinement Materials Science and Engineering A. 651: 332-335. DOI: 10.1016/J.Msea.2015.10.126 |
0.312 |
|
2016 |
Liu W, Cao C, Xu J, Wang X, Li X. Molten salt assisted solidification nanoprocessing of Al-TiC nanocomposites Materials Letters. 185: 392-395. DOI: 10.1016/J.Matlet.2016.09.023 |
0.4 |
|
2016 |
Cao C, Chen L, Xu J, Zhao J, Pozuelo M, Li X. Phase control in immiscible Zn-Bi alloy by tungsten nanoparticles Materials Letters. 174: 213-216. DOI: 10.1016/J.Matlet.2016.03.105 |
0.366 |
|
2015 |
Chen LY, Xu JQ, Choi H, Pozuelo M, Ma X, Bhowmick S, Yang JM, Mathaudhu S, Li XC. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles. Nature. 528: 539-43. PMID 26701055 DOI: 10.1038/Nature16445 |
0.393 |
|
2015 |
Xu J, Chen L, Choi H, Li X. Fabrication of Hierarchical Metallic Nanocomposite Core/Metal Shell Nanostructures by Self-Assembly. Journal of Nanoscience and Nanotechnology. 15: 5479-83. PMID 26373164 DOI: 10.1166/Jnn.2015.9830 |
0.354 |
|
2015 |
Wu J, Zhou S, Li X. Ultrasonic Attenuation Based Inspection Method for Scale-up Production of A206–Al2O3 Metal Matrix Nanocomposites Journal of Manufacturing Science and Engineering-Transactions of the Asme. 137: 11013. DOI: 10.1115/1.4028128 |
0.368 |
|
2015 |
Chen L, Xu J, Li X. Controlling Phase Growth During Solidification by Nanoparticles Materials Research Letters. 3: 43-49. DOI: 10.1080/21663831.2014.956264 |
0.316 |
|
2015 |
Ma C, Chen L, Xu J, Zhao J, Li X. Control of fluid dynamics by nanoparticles in laser melting Journal of Applied Physics. 117: 114901. DOI: 10.1063/1.4915276 |
0.358 |
|
2015 |
Mutyala MSK, Javadi A, Zhao J, Lin TC, Tang W, Li X. Scalable Platform for Batch Fabrication of Micro/Nano Devices on Engineering Substrates of Arbitrary Shapes and Sizes☆ Procedia Manufacturing. 1: 205-215. DOI: 10.1016/J.Promfg.2015.09.002 |
0.307 |
|
2015 |
Gao C, Lu W, Chen L, Li X, Ke Y. A physically-based plastic constitutive model considering nanoparticle cluster effect for metal matrix nanocomposites Materials Science and Engineering A. 641: 172-180. DOI: 10.1016/J.Msea.2015.06.013 |
0.35 |
|
2015 |
Mutyala MSK, Zhao J, Lin TC, Li X. Study on materials and fabrication of functional thin film AlN force sensors Journal of Manufacturing Processes. 19: 233-238. DOI: 10.1016/J.Jmapro.2015.05.002 |
0.302 |
|
2014 |
Estruga M, Girard SN, Ding Q, Chen L, Li X, Jin S. Facile and scalable synthesis of Ti5Si3 nanoparticles in molten salts for metal-matrix nanocomposites. Chemical Communications (Cambridge, England). 50: 1454-7. PMID 24352506 DOI: 10.1039/C3Cc48168A |
0.334 |
|
2014 |
Mutyala MSK, Zhou J, Li X. Transferable and flexible thin film devices for engineering applications Journal of Micromechanics and Microengineering. 24: 55019. DOI: 10.1088/0960-1317/24/5/055019 |
0.304 |
|
2014 |
Zhou Q, Zhou J, De Cicco M, Zhou S, Li X. Detecting 3d spatial clustering of particles in nanocomposites based on cross-sectional images Technometrics. 56: 212-224. DOI: 10.1080/00401706.2013.804440 |
0.319 |
|
2014 |
Xu J, Estruga M, Chen L, Yahata B, Choi H, Li X. Urchin-like AlOOH nanostructures on Al microspheres grown via in-situ oxide template Materials Science and Engineering B-Advanced Functional Solid-State Materials. 188: 89-93. DOI: 10.1016/J.Mseb.2014.06.014 |
0.331 |
|
2013 |
Estruga M, Chen L, Choi H, Li X, Jin S. Ultrasonic-assisted synthesis of surface-clean TiB2 nanoparticles and their improved dispersion and capture in Al-matrix nanocomposites. Acs Applied Materials & Interfaces. 5: 8813-9. PMID 23957877 DOI: 10.1021/Am402719P |
0.365 |
|
2013 |
Ma C, Chen L, Xu J, Fehrenbacher A, Li Y, Pfefferkorn FE, Duffie NA, Zheng J, Li X. Effect of fabrication and processing technology on the biodegradability of magnesium nanocomposites. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 101: 870-7. PMID 23359493 DOI: 10.1002/Jbm.B.32891 |
0.353 |
|
2013 |
Li H, Choi H, Ma C, Zhao J, Jiang H, Cai W, Abell JA, Li X. Transient temperature and heat flux measurement in ultrasonic joining of battery tabs using thin-film microsensors Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4024816 |
0.311 |
|
2013 |
Wu J, Zhou S, Li X. Acoustic emission monitoring for ultrasonic cavitation based dispersion process Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4024041 |
0.344 |
|
2013 |
Xu J, Chen L, Choi HS, Konish H, Li X. Assembly of metals and nanoparticles into novel nanocomposite superstructures Scientific Reports. 3: 1730. DOI: 10.1038/Srep01730 |
0.371 |
|
2013 |
Chen LY, Weiss D, Morrow J, Xu JQ, Li XC. A novel manufacturing route for production of high-performance metal matrix nanocomposites Manufacturing Letters. 1: 62-65. DOI: 10.1016/J.Mfglet.2013.10.010 |
0.39 |
|
2013 |
Zhao J, Li H, Choi H, Cai W, Abell JA, Li X. Insertable thin film thermocouples for in situ transient temperature monitoring in ultrasonic metal welding of battery tabs Journal of Manufacturing Processes. 15: 96-101. DOI: 10.1016/J.Jmapro.2012.10.002 |
0.35 |
|
2013 |
Choi H, Cho WH, Konishi H, Kou S, Li X. Nanoparticle-induced superior hot tearing resistance of A206 alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 1897-1907. DOI: 10.1007/S11661-012-1531-8 |
0.311 |
|
2012 |
Xu JQ, Chen LY, Choi H, Li XC. Theoretical study and pathways for nanoparticle capture during solidification of metal melt. Journal of Physics. Condensed Matter : An Institute of Physics Journal. 24: 255304. PMID 22640981 DOI: 10.1088/0953-8984/24/25/255304 |
0.395 |
|
2012 |
Werschmoeller D, Li X, Ehmann K. Measurement of transient tool-internal temperature fields during hard turning by insert-embedded thin film sensors Journal of Manufacturing Science and Engineering, Transactions of the Asme. 134. DOI: 10.1115/1.4007621 |
0.323 |
|
2012 |
Zeng L, Zhou Q, De Cicco MP, Li X, Zhou S. Quantifying boundary effect of nanoparticles in metal matrix nanocomposite fabrication processes Iie Transactions (Institute of Industrial Engineers). 44: 551-567. DOI: 10.1080/0740817X.2011.635180 |
0.374 |
|
2012 |
Chen LY, Konishi H, Fehrenbacher A, Ma C, Xu JQ, Choi H, Xu HF, Pfefferkorn FE, Li XC. Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites Scripta Materialia. 67: 29-32. DOI: 10.1016/J.Scriptamat.2012.03.013 |
0.308 |
|
2012 |
Erman A, Groza J, Li X, Choi H, Cao G. Nanoparticle effects in cast Mg-1 wt% SiC nano-composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 558: 39-43. DOI: 10.1016/J.Msea.2012.07.048 |
0.384 |
|
2012 |
Guo W, Wang Q, Ye B, Li X, Liu X, Zhou H. Microstructural refinement and homogenization of Mg–SiC nanocomposites by cyclic extrusion compression Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 556: 267-270. DOI: 10.1016/J.Msea.2012.06.086 |
0.374 |
|
2012 |
Sun Y, Choi H, Konishi H, Pikhovich V, Hathaway R, Chen L, Li X. Effect of core-shelled nanoparticles of carbon-coated nickel on magnesium Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 546: 284-290. DOI: 10.1016/J.Msea.2012.03.070 |
0.376 |
|
2012 |
Choi H, Konishi H, Li X. Al2O3 nanoparticles induced simultaneous refinement and modification of primary and eutectic Si particles in hypereutectic Al–20Si alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 541: 159-165. DOI: 10.1016/J.Msea.2012.01.131 |
0.344 |
|
2012 |
Wang D, Cicco MPD, Li X. Using diluted master nanocomposites to achieve grain refinement and mechanical property enhancement in as-cast Al–9Mg Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 532: 396-400. DOI: 10.1016/J.Msea.2011.11.002 |
0.359 |
|
2012 |
Choi H, Jones M, Konishi H, Li X. Effect of Combined Addition of Cu and Aluminum Oxide Nanoparticles on Mechanical Properties and Microstructure of Al-7Si-0.3Mg Alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 43: 738-746. DOI: 10.1007/S11661-011-0905-7 |
0.354 |
|
2012 |
Choi H, Li X. Refinement of primary Si and modification of eutectic Si for enhanced ductility of hypereutectic Al–20Si–4.5Cu alloy with addition of Al2O3 nanoparticles Journal of Materials Science. 47: 3096-3102. DOI: 10.1007/S10853-011-6143-Y |
0.341 |
|
2012 |
Choi H, Sun Y, Slater BP, Konishi H, Li X. AZ91D/TiB2 Nanocomposites Fabricated by Solidification Nanoprocessing Advanced Engineering Materials. 14: 291-295. DOI: 10.1002/Adem.201100313 |
0.392 |
|
2011 |
Werschmoeller D, Ehmann K, Li X. Tool embedded thin film microsensors for monitoring thermal phenomena at tool-workpiece interface during machining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 133. DOI: 10.1115/1.4003616 |
0.334 |
|
2011 |
Werschmoeller D, Li X. Measurement of tool internal temperatures in the tool–chip contact region by embedded micro thin film thermocouples Journal of Manufacturing Processes. 13: 147-152. DOI: 10.1016/J.Jmapro.2011.05.001 |
0.315 |
|
2011 |
De Cicco MP, Turng LS, Li X, Perepezko JH. Nucleation catalysis in aluminum alloy A356 using nanoscale inoculants Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 2323-2330. DOI: 10.1007/S11661-011-0607-1 |
0.322 |
|
2011 |
Choi H, Alba-Baena N, Nimityongskul S, Jones M, Wood T, Sahoo M, Lakes R, Kou S, Li X. Characterization of hot extruded Mg/SiC nanocomposites fabricated by casting Journal of Materials Science. 46: 2991-2997. DOI: 10.1007/S10853-010-5176-Y |
0.373 |
|
2011 |
Nimityongskul S, Alba-Baena N, Choi H, Jones M, Wood T, Sahoo M, Lakes R, Kou S, Li X. Characterization of Hot Extruded Mg/SiC Nanocomposites Fabricated by Casting Magnesium Technology. 443. DOI: 10.1007/978-3-319-48223-1_83 |
0.316 |
|
2009 |
Werschmoeller D, Li X. Embedding of micro thin film sensors into Polycrystalline Cubic Boron Nitride (PCBN) for tooling applications via diffusion bonding International Journal of Mechatronics and Manufacturing Systems. 2: 455. DOI: 10.1504/Ijmms.2009.027129 |
0.331 |
|
2009 |
De Cicco MP, Li X, Turng LS. Semi-solid casting (SSC) of zinc alloy nanocomposites Journal of Materials Processing Technology. 209: 5881-5885. DOI: 10.1016/J.Jmatprotec.2009.07.001 |
0.396 |
|
2009 |
De Cicco M, Konishi H, Cao G, Choi HS, Turng LS, Perepezko JH, Kou S, Lakes R, Li X. Strong, ductile magnesium-zinc nanocomposites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 3038-3045. DOI: 10.1007/S11661-009-0013-0 |
0.4 |
|
2008 |
Cheng X, Li X. Development of Metal Embedded Microsensors by Diffusion Bonding and Testing in Milling Process Journal of Manufacturing Science and Engineering-Transactions of the Asme. 130: 61010. DOI: 10.1115/1.3006318 |
0.351 |
|
2008 |
Zhang X, Jiang H, Li X. Design, Fabrication, and Characterization of Metal Embedded Microphotonic Sensors Journal of Manufacturing Science and Engineering. 130. DOI: 10.1115/1.2917356 |
0.361 |
|
2008 |
Cao G, Konishi H, Li X. Mechanical Properties and Microstructure of Mg∕SiC Nanocomposites Fabricated by Ultrasonic Cavitation Based Nanomanufacturing Journal of Manufacturing Science and Engineering-Transactions of the Asme. 130: 31105. DOI: 10.1115/1.2823086 |
0.402 |
|
2008 |
Choi H, Li X. Experimental Investigations of Laser Micromachining of Nickel Using Thin Film Micro Thermocouples Journal of Manufacturing Science and Engineering-Transactions of the Asme. 130: 21002. DOI: 10.1115/1.2816021 |
0.302 |
|
2008 |
Zhang X, Li X. Design, fabrication and characterization of optical microring sensors on metal substrates Journal of Micromechanics and Microengineering. 18: 15025. DOI: 10.1088/0960-1317/18/1/015025 |
0.356 |
|
2008 |
Datta A, Cheng X, Miller MA, Li X. High temperature annealing effects on chromel (Ni90Cr10) thin films and interdiffusion study for sensing applications Thin Solid Films. 516: 4307-4311. DOI: 10.1016/J.Tsf.2007.12.095 |
0.316 |
|
2008 |
Cao G, Choi H, Oportus J, Konishi H, Li X. Study on tensile properties and microstructure of cast AZ91D/AlN nanocomposites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 494: 127-131. DOI: 10.1016/J.Msea.2008.04.070 |
0.371 |
|
2008 |
Cao G, Konishi H, Li X. Mechanical properties and microstructure of SiC-reinforced Mg-(2,4)Al-1Si nanocomposites fabricated by ultrasonic cavitation based solidification processing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 486: 357-362. DOI: 10.1016/J.Msea.2007.09.054 |
0.365 |
|
2008 |
Cao G, Kobliska J, Konishi H, Li X. Tensile Properties and Microstructure of SiC Nanoparticle-Reinforced Mg-4Zn Alloy Fabricated by Ultrasonic Cavitation-Based Solidification Processing Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 39: 880-886. DOI: 10.1007/S11661-007-9453-6 |
0.391 |
|
2008 |
Cao G, Choi H, Konishi H, Kou S, Lakes R, Li X. Mg-6Zn/1.5%SiC nanocomposites fabricated by ultrasonic cavitation-based solidification processing Journal of Materials Science. 43: 5521-5526. DOI: 10.1007/S10853-008-2785-9 |
0.367 |
|
2008 |
Cao G, Konishi H, Li X. Recent Developments on Ultrasonic Cavitation Based Solidification Processing of Bulk Magnesium Nanocomposites International Journal of Metalcasting. 2: 57-65. DOI: 10.1007/Bf03355422 |
0.401 |
|
2007 |
Cheng X, Datta A, Choi H, Zhang X, Li X. Study on Embedding and Integration of Microsensors Into Metal Structures for Manufacturing Applications Journal of Manufacturing Science and Engineering-Transactions of the Asme. 129: 416-424. DOI: 10.1115/1.2515456 |
0.367 |
|
2007 |
Cheng X, Li X. Investigation of heat generation in ultrasonic metal welding using micro sensor arrays Journal of Micromechanics and Microengineering. 17: 273-282. DOI: 10.1088/0960-1317/17/2/013 |
0.342 |
|
2007 |
Choi H, Konishi H, Xu H, Li X. Embedding of micro thin film strain sensors in sapphire by diffusion bonding Journal of Micromechanics and Microengineering. 17: 2248-2252. DOI: 10.1088/0960-1317/17/11/011 |
0.331 |
|
2006 |
Turng L, DeCicco MP, Li X. Semi-solid forming of metal-matrix nanocomposites Solid State Phenomena. 478-483. DOI: 10.4028/Www.Scientific.Net/Ssp.116-117.478 |
0.347 |
|
2006 |
Datta A, Choi H, Li X. Batch Fabrication and Characterization of Micro-Thin-Film Thermocouples Embedded in Metal Journal of the Electrochemical Society. 153. DOI: 10.1149/1.2179218 |
0.371 |
|
2006 |
Choi H, Datta A, Cheng X, Li X. Microfabrication and characterization of metal-embedded thin-film thermomechanical microsensors for applications in hostile manufacturing environments Ieee\/Asme Journal of Microelectromechanical Systems. 15: 322-329. DOI: 10.1109/Jmems.2006.872235 |
0.352 |
|
2006 |
Zhang X, Choi H, Datta A, Li X. Design, fabrication and characterization of metal embedded thin film thermocouples with various film thicknesses and junction sizes Journal of Micromechanics and Microengineering. 16: 900-905. DOI: 10.1088/0960-1317/16/5/004 |
0.343 |
|
2005 |
Choi H, Yang Y, Li X. Experimental study on integration of laser-based additive/subtractive processes for meso/micro solid freeform fabrication The International Journal of Advanced Manufacturing Technology. 26: 335-341. DOI: 10.1007/S00170-003-2008-0 |
0.306 |
|
2004 |
Li X, Prinz F. Analytical and experimental study on noncontact sensing with embedded fiber-optic sensors in rotating metal parts Journal of Lightwave Technology. 22: 1720-1727. DOI: 10.1109/Jlt.2004.829231 |
0.684 |
|
2004 |
Li X, Tang W, Golnas A. Embedding and characterization of fiber‐optic and thin‐film sensors in metallic structures Sensor Review. 24: 370-377. DOI: 10.1108/02602280410558403 |
0.332 |
|
2004 |
Li X, Yang Y, Cheng X. Ultrasonic-assisted fabrication of metal matrix nanocomposites Journal of Materials Science. 39: 3211-3212. DOI: 10.1023/B:Jmsc.0000025862.23609.6F |
0.336 |
|
2004 |
Lan J, Yang Y, Li X. Microstructure and microhardness of SiC nanoparticles reinforced magnesium composites fabricated by ultrasonic method Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 386: 284-290. DOI: 10.1016/J.Msea.2004.07.024 |
0.39 |
|
2004 |
Yang Y, Lan J, Li X. Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 380: 378-383. DOI: 10.1016/J.Msea.2004.03.073 |
0.374 |
|
2003 |
Li X, Prinz F. Metal Embedded Fiber Bragg Grating Sensors in Layered Manufacturing Journal of Manufacturing Science and Engineering. 125: 577-585. DOI: 10.1115/1.1581889 |
0.679 |
|
2003 |
Li X, Prinz F. Embedded Fiber Bragg Grating Sensors in Polymer Structures Fabricated by Layered Manufacturing Journal of Manufacturing Processes. 5: 78-86. DOI: 10.1016/S1526-6125(03)70043-7 |
0.666 |
|
2003 |
Li X, Li Z. Nano-sized Si3N4 reinforced NiFe nanocomposites by electroplating Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 358: 107-113. DOI: 10.1016/S0921-5093(03)00267-3 |
0.307 |
|
2002 |
Li X, Choi H, Yang Y. Micro rapid prototyping system for micro components Thin Solid Films. 420: 515-523. DOI: 10.1016/S0040-6090(02)00935-5 |
0.33 |
|
2002 |
Li X, Johnson J, Groza J, Prinz F. Processing and microstructures of fiber bragg grating sensors embedded in stainless steel Metallurgical and Materials Transactions A. 33: 3019-3024. DOI: 10.1007/S11661-002-0286-Z |
0.685 |
|
Show low-probability matches. |