Year |
Citation |
Score |
2017 |
Chen SH, Chou PC, Cheng S. Channel temperature measurement in hermetic packaged GaN HEMTs power switch using fast static and transient thermal methods Journal of Thermal Analysis and Calorimetry. 129: 1159-1168. DOI: 10.1007/S10973-017-6275-7 |
0.305 |
|
2016 |
Chou HP, Cheng S, Cheng CH, Chuang CW. Development and characterization of the thermal behavior of packaged cascode GaN HEMTs Materials Science in Semiconductor Processing. 41: 304-311. DOI: 10.1016/J.Mssp.2015.09.023 |
0.313 |
|
2016 |
Chen SH, Chou PC, Cheng S. Evaluation of thermal performance of packaged GaN HEMT cascode power switch by transient thermal testing Applied Thermal Engineering. 98: 1003-1012. DOI: 10.1016/J.Applthermaleng.2015.12.110 |
0.322 |
|
2014 |
Chou PC, Cheng S, Chen SH. Evaluation of thermal performance of all-GaN power module in parallel operation Applied Thermal Engineering. 70: 593-599. DOI: 10.1016/J.Applthermaleng.2014.05.081 |
0.312 |
|
2013 |
Chou H, Kung Y, Quynh NV, Cheng S. Original article: Optimized FPGA design, verification and implementation of a neuro-fuzzy controller for PMSM drives Mathematics and Computers in Simulation. 90: 28-44. DOI: 10.1016/J.Matcom.2012.07.012 |
0.308 |
|
2013 |
Cheng S, Chou PC. Novel packaging design for high-power GaN-on-Si high electron mobility transistors (HEMTs) International Journal of Thermal Sciences. 66: 63-70. DOI: 10.1016/J.Ijthermalsci.2012.10.003 |
0.337 |
|
2013 |
Chou PC, Cheng S. Design and characterization of a 200 V, 45 A all-GaN HEMT-based power module Applied Thermal Engineering. 61: 20-27. DOI: 10.1016/J.Applthermaleng.2013.07.004 |
0.313 |
|
2013 |
Cheng S, Chou PC, Chieng W, Chang EY. Enhanced lateral heat dissipation packaging structure for GaN HEMTs on Si substrate Applied Thermal Engineering. 51: 20-24. DOI: 10.1016/J.Applthermaleng.2012.08.009 |
0.307 |
|
2012 |
Shih HF, Chiu Y, Cheng S, Lee YC, Lu CS, Chen YC, Chiou JC. Prism-type holographic optical element design and verification for the blue-light small-form-factor optical pickup head. Applied Optics. 51: 5758-66. PMID 22907000 DOI: 10.1364/Ao.51.005758 |
0.304 |
|
2012 |
Lin Y, Chou P, Cheng S. Enhancement of PZT embedded swing arm actuator using integrated read/write performance and actuation Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems. 18: 437-442. DOI: 10.1007/S00542-012-1446-8 |
0.356 |
|
2011 |
Chou P, Lin Y, Cheng S. Enhancement of optical adaptive sensing by using a dual-stage seesaw-swivel actuator with a tunable vibration absorber. Sensors. 11: 4808-4829. PMID 22163877 DOI: 10.3390/S110504808 |
0.333 |
|
2011 |
Chou P, Lin Y, Cheng S. Miniaturized suspension structure for precise flying height positioning measurement using a swing arm actuator with a holographic optical element module sensor Optical Engineering. 50: 35201. DOI: 10.1117/1.3549259 |
0.32 |
|
2011 |
Lin YC, Chou PC, Hou KC, Cheng S, Chiou J, Shih HF. Optimising the performance of optical data storage drives based on a novel seesaw-swivel actuator for a holographic module Micro & Nano Letters. 6: 571-574. DOI: 10.1049/Mnl.2011.0135 |
0.346 |
|
2010 |
Chou PC, Lin YC, Cheng S. Optimization of Seesaw Swing Arm Actuator Design for Small Form Factor Optical Disk Drive Japanese Journal of Applied Physics. 49: 52502. DOI: 10.1143/Jjap.49.052502 |
0.352 |
|
2010 |
Chou P, Lin Y, Cheng S. A Novel Seesaw Swivel Actuator Design and Fabrication Ieee Transactions On Magnetics. 46: 2603-2610. DOI: 10.1109/Tmag.2010.2045388 |
0.351 |
|
Show low-probability matches. |