Year |
Citation |
Score |
2020 |
Saimoto S, Diak BJ, Kula A, Niewczas M. Forensic analyses of microstructure evolution of stage II & III: New assimilated model for work-hardening in FCC metals Acta Materialia. 198: 168-177. DOI: 10.1016/J.Actamat.2020.08.002 |
0.452 |
|
2019 |
Saimoto S, Niewczas M, Langille MR, Diak B. Specific resistivity of dislocations and vacancies for super-pure aluminium at 4.2 K determined in-situ and post-recovery deformation and correlated to flow stress Philosophical Magazine. 99: 2770-2788. DOI: 10.1080/14786435.2019.1640404 |
0.427 |
|
2019 |
Saimoto S. Deformation kinetics and constitutive relation analyses of bifurcation in work-hardening of face-centred cubic metals at cryogenic temperatures Acta Materialia. 174: 43-52. DOI: 10.1016/J.Actamat.2019.05.029 |
0.437 |
|
2018 |
Saimoto S, Langille MR, Niewczas M. Forensic Analyses of Stress-Strain Diagrams to Evaluate Contributions from Microstructure Materials Science Forum. 941: 2270-2277. DOI: 10.4028/Www.Scientific.Net/Msf.941.2270 |
0.403 |
|
2018 |
Saimoto S, Singh M, Langille M, Kula A, Niewczas M. Identification of the role of Al-Fe-Mn-Si large casting dispersoids in age-hardenable aluminum alloys using small angle X-ray scattering Materials Science and Engineering: A. 734: 51-58. DOI: 10.1016/J.Msea.2018.07.085 |
0.474 |
|
2018 |
Saimoto S, Singh M, Langille M, Levesque J, Inal K, Niewczas M, Woll A. Method to decode stress-strain diagrams to identify the structure-strength relationships in aged aluminum alloys Materials Science and Engineering: A. 709: 9-16. DOI: 10.1016/J.Msea.2017.10.004 |
0.461 |
|
2017 |
Singh MA, Saimoto S, Langille MR, Lévesque J, Inal K, Woll AR. Small-angle X-ray scattering investigation of deformation-induced nanovoids in AA6063 aluminium alloy Philosophical Magazine. 97: 2496-2513. DOI: 10.1080/14786435.2017.1340684 |
0.353 |
|
2017 |
Langille MR, Diak BJ, Saimoto S. Re-examining the relation between fracture strain and yield stress in Al-Mg-Si alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 705: 196-199. DOI: 10.1016/J.Msea.2017.08.070 |
0.414 |
|
2016 |
Saimoto S, Van Houtte P, Inal K, Langille M. New biaxial yield function for aluminum alloys based on plastic work and work-hardening analyses Acta Materialia. 118: 109-119. DOI: 10.1016/J.Actamat.2016.07.036 |
0.448 |
|
2014 |
Saimoto S, Inal K, Jin HO. Constitutive Analyses of Tensile Tests on Pre-Rolled AA3003 Sheets Materials Science Forum. 710-715. DOI: 10.4028/Www.Scientific.Net/Msf.794-796.710 |
0.457 |
|
2012 |
Saimoto S, Huang MX. New Constitutive Analysis of Microstructural Evolution: Hot Compression of Gamma Iron Materials Science Forum. 2284-2289. DOI: 10.4028/Www.Scientific.Net/Msf.706-709.2284 |
0.413 |
|
2012 |
Saimoto S, Diak BJ, Lloyd DJ. Point defect generation, nano-void formation and growth. II. Criterion for ductile failure Philosophical Magazine. 92: 1915-1936. DOI: 10.1080/14786435.2012.661480 |
0.419 |
|
2012 |
Saimoto S, Diak BJ. Point defect generation, nano-void formation and growth. I. Validation Philosophical Magazine. 92: 1890-1914. DOI: 10.1080/14786435.2012.661479 |
0.425 |
|
2012 |
Saimoto S, Lloyd DJ. A new analysis of yielding and work hardening in AA1100 and AA5754 at low temperatures Acta Materialia. 60: 6352-6361. DOI: 10.1016/J.Actamat.2012.08.014 |
0.47 |
|
2011 |
Brahme AP, Inal K, Mishra RK, Saimoto S. The backstress effect of evolving deformation boundaries in FCC polycrystals International Journal of Plasticity. 27: 1252-1266. DOI: 10.1016/J.Ijplas.2011.02.006 |
0.443 |
|
2011 |
Brahme AP, Inal K, Mishra RK, Saimoto S. A new strain hardening model for rate-dependent crystal plasticity Computational Materials Science. 50: 2898-2908. DOI: 10.1016/J.Commatsci.2011.05.006 |
0.434 |
|
2011 |
Saimoto S, Houtte PV. Constitutive relation based on Taylor slip analysis to replicate work-hardening evolution Acta Materialia. 59: 602-612. DOI: 10.1016/J.Actamat.2010.09.065 |
0.418 |
|
2009 |
Saimoto S, Cooley J, Larsen H, Scholler C. Kinetic analysis of dynamic point defect pinning in aluminium initiated by strain rate changes Philosophical Magazine. 89: 853-868. DOI: 10.1080/14786430902791730 |
0.488 |
|
2009 |
Saimoto S, Cooley JI, Diak BJ, Jin H, Mishra RK. Recovery studies of cold rolled aluminum sheet using X-ray line broadening and activation volume determinations Acta Materialia. 57: 4822-4834. DOI: 10.1016/J.Actamat.2009.06.046 |
0.615 |
|
2008 |
Saimoto S, Gabryel C, Cooley J, Jin H. Kinetics of texture evolution during rapid solutionising of cold rolled Al-Mg-Si alloy Materials Science and Technology. 24: 856-863. DOI: 10.1179/174328408X295953 |
0.606 |
|
2008 |
Westfall L, Diak BJ, Singh MA, Saimoto S. Dynamic Dislocation-Defect Analysis and SAXS Study of Nanovoid Formation in Aluminum Alloys Journal of Engineering Materials and Technology-Transactions of the Asme. 130: 21011. DOI: 10.1115/1.2841619 |
0.446 |
|
2008 |
Saimoto S. Dynamic manifestation of point defects on flow stress and the role of grain boundary as vacancy sinks Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 483: 67-70. DOI: 10.1016/J.Msea.2006.09.146 |
0.472 |
|
2007 |
Saimoto S, Jin HO. Effects of Solubility Limit and the Presence of Ultra-Fine Al6Fe on the Kinetics of Grain Growth in Dilute Al-Fe Alloys Materials Science Forum. 550: 339-344. DOI: 10.4028/Www.Scientific.Net/Msf.550.339 |
0.409 |
|
2007 |
Saimoto S. Dynamic Evaluation of Strength-Structure Properties by the Determination of Activation Volume and Mean Slip Distance Materials Science Forum. 2192-2197. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.2192 |
0.468 |
|
2006 |
Saimoto S, Subbaiyan S, Gabryel C. Characterization of Ageing Products in AA6111 Using Dynamic Dislocation-Defect Analysis Materials Science Forum. 777-782. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.777 |
0.423 |
|
2006 |
Saimoto S. Dynamic dislocation–defect analysis Philosophical Magazine. 86: 4213-4233. DOI: 10.1080/14786430500367347 |
0.44 |
|
2005 |
Sarkar J, Cao S, Saimoto S. Friction Effects on Through-Thickness Texture Evolution during Rolling Materials Science Forum. 567-572. DOI: 10.4028/Www.Scientific.Net/Msf.495-497.567 |
0.377 |
|
2005 |
Saimoto S, Cao S, Mishra RK. Enhancement of Ductility in Aluminum Alloys by the Control of Transition-Metal Solutes during Thermo-Mechanical Processing Materials Science Forum. 421-424. DOI: 10.4028/Www.Scientific.Net/Msf.475-479.421 |
0.441 |
|
2004 |
Saimoto S. A unifying analysis of the microplastic kinetics with the operative plastic potential Philosophical Magazine. 84: 451-466. DOI: 10.1080/14786430310001611680 |
0.377 |
|
2004 |
Saimoto S. Correlation of the applied strain rate with the operative mean slip and dislocation velocities Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 387: 129-132. DOI: 10.1016/J.Msea.2004.01.073 |
0.426 |
|
2003 |
Saimoto S. The Characterization of the Plastic Potential of Aluminum Alloys Using Internal Variables of Strain Rate Sensitivity, Mean Slip Distance and Mean Slip Velocity Materials Science Forum. 279-284. DOI: 10.4028/Www.Scientific.Net/Msf.426-432.279 |
0.459 |
|
2002 |
Saimoto S, Cao S, Jin HO. The Physical Metallurgy of Recrystallization and Grain Growth in Non-Hardenable Aluminum Alloys Materials Science Forum. 339-344. DOI: 10.4028/Www.Scientific.Net/Msf.396-402.339 |
0.393 |
|
2000 |
Langelaan G, Saimoto S, Baxter WJ. Dynamic Response of Residual Stresses due to Rapid Temperature Changes in Kaowool Reinforced AA339 Aluminum Materials Science Forum. 516-523. DOI: 10.4028/Www.Scientific.Net/Msf.347-349.516 |
0.362 |
|
2000 |
Jin HO, Li J, Seki F, Saimoto S. On parameters related to continuous and discontinuous recrystallization and subsequent grain growth Materials Science Forum. 745-750. DOI: 10.4028/Www.Scientific.Net/Msf.331-337.745 |
0.442 |
|
2000 |
Jin HO, Ko C, Saimoto S, Threadgill PL. Microstructure of Friction Stir Welded Joints in AA5182 Materials Science Forum. 1725-1730. DOI: 10.4028/Www.Scientific.Net/Msf.331-337.1725 |
0.401 |
|
1998 |
Li JL, Saimoto S. Texture Evolution in Aluminum during Continuous Recrystallization Materials Science Forum. 459-464. DOI: 10.4028/Www.Scientific.Net/Msf.273-275.459 |
0.416 |
|
1998 |
Starling J, Saimoto S, Boyd JD. Strengthening of low-interstitial steels by strain-ageing treatments Scripta Materialia. 39: 487-492. DOI: 10.1016/S1359-6462(98)00226-7 |
0.377 |
|
1997 |
Li J, Seki F, Saimoto S, Itoh K, Kamijo T. Annealing twins in nominally pure Al Scripta Materialia. 36: 1261-1266. DOI: 10.1016/S1359-6462(97)00025-0 |
0.379 |
|
1997 |
Diak BJ, Saimoto S. The determination of solute clusters in dilute aluminum alloys using strain rate sensitivity Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 1019-1022. DOI: 10.1016/S0921-5093(97)00342-0 |
0.406 |
|
1997 |
Saimoto S, Diak BJ, Upadhyaya KR. Dislocation-defect analysis during micro-indentation using displacement rate changes Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 1015-1018. DOI: 10.1016/S0921-5093(97)00317-1 |
0.461 |
|
1997 |
Li J, Saimoto S. The role of solute segregation and precipitation at dislocations to enhance continuous recrystallization Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 1011-1014. DOI: 10.1016/S0921-5093(97)00315-8 |
0.477 |
|
1996 |
Diak BJ, Saimoto S, Kamat RG. Measurement of Mean Slip Distance in Aluminum and its Correlation to Ductility Materials Science Forum. 617-622. DOI: 10.4028/Www.Scientific.Net/Msf.217-222.617 |
0.307 |
|
1996 |
Langelaan G, Saimoto S, Moske M. Temperature Dependence Of Residual Stresses In Capped Blanket Cu Films Of Various Thicknesses Mrs Proceedings. 428. DOI: 10.1557/Proc-428-537 |
0.396 |
|
1996 |
Saimoto S, Li J, Langelaan G, Diak BJ, Shimizu J. Formation of Cube Texture in Nominally Pure Aluminum With Fine Particle Dispersion Textures and Microstructures. 26: 245-262. DOI: 10.1155/Tsm.26-27.245 |
0.419 |
|
1996 |
Deschamps A, Bréchet Y, Necker CJ, Saimoto S, Embury JD. Study of large strain deformation of dilute solid solutions of Al-Cu using channel-die compression Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 207: 143-152. DOI: 10.1016/0921-5093(95)09992-1 |
0.46 |
|
1995 |
MacDonald WD, Carpenter GJC, Saimoto S. Using strain rate sensitivity measurements to determine phase relations in A430 stainless steel Materials Science and Engineering A. 190: 33-42. DOI: 10.1016/0921-5093(94)09590-S |
0.436 |
|
1994 |
Clarke AP, Langelaan G, Saimoto S. Temperature Dependence of Residual Stresses and Stress Relaxation in Blanket Films of Various Thicknesses Mrs Proceedings. 356. DOI: 10.1557/Proc-356-609 |
0.39 |
|
1993 |
Saimoto S, Kamat RG, Clarke P, Houte Pv. A Quantitative Method To Examine Through Thickness Texture Variation Textures and Microstructures. 21: 109-120. DOI: 10.1155/Tsm.21.109 |
0.333 |
|
1992 |
Smith LF, Krawitz AD, Clarke P, Saimoto S, Shi N, Arsenault RJ. Residual stresses in discontinuous metal matrix composites Materials Science and Engineering A. 159: 13. DOI: 10.1016/0921-5093(92)90302-H |
0.317 |
|
1991 |
Saimoto S, Houtte Pv, Reesor D, Clarke P. Textural Evolution During Draw-Cup Tests of Thick Aluminum 3004 Alloy Sheet Textures and Microstructures. 14: 1233-1238. DOI: 10.1155/Tsm.14-18.1233 |
0.398 |
|
Show low-probability matches. |