Year |
Citation |
Score |
2021 |
Ebrahimi A, Kenny S, Mohammadi M. Failure Mechanisms of Equal and Unequal Wall Thickness Hybrid Maraging Steel-P20 Tubular Joints: Effects of Welding Residual Stresses Journal of Offshore Mechanics and Arctic Engineering-Transactions of the Asme. 143. DOI: 10.1115/1.4047791 |
0.337 |
|
2020 |
Nguyen V, Delbari SA, Ahmadi Z, Asl MS, Kakroudi MG, Le QV, Namini AS, Shokouhimehr M, Mohammadi M, Peng W. TEM characterization of hot-pressed ZrB2-SiC-AlN composites Results in Physics. 19: 103348. DOI: 10.1016/J.Rinp.2020.103348 |
0.429 |
|
2020 |
Dharmendra C, Shakerin S, Ram GDJ, Mohammadi M. Wire-arc additive manufacturing of nickel aluminum bronze/stainless steel hybrid parts – Interfacial characterization, prospects, and problems Materialia. 13: 100834. DOI: 10.1016/J.Mtla.2020.100834 |
0.39 |
|
2020 |
Delbari SA, Namini AS, Azadbeh M, Ahmadi Z, Nguyen V, Le QV, Shokouhimehr M, Asl MS, Mohammadi M. Post hot rolling of spark plasma sintered Ti–Mo–B4C composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 799: 140214. DOI: 10.1016/J.Msea.2020.140214 |
0.436 |
|
2020 |
Alaghmandfard R, Dharmendra C, Odeshi AG, Mohammadi M. Dynamic mechanical properties and failure characteristics of electron beam melted Ti-6Al-4V under high strain rate impact loadings Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 793: 139794. DOI: 10.1016/J.Msea.2020.139794 |
0.479 |
|
2020 |
Shakil SI, Dharmendra C, Amirkhiz BS, Verma D, Mohammadi M, Haghshenas M. Micromechanical characterization of wire-arc additive manufactured and cast nickel aluminum bronze: Ambient and intermediate temperatures Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 792: 139773. DOI: 10.1016/J.Msea.2020.139773 |
0.458 |
|
2020 |
Hadadzadeh A, Shahriari A, Amirkhiz BS, Li J, Mohammadi M. Additive manufacturing of an Fe–Cr–Ni–Al maraging stainless steel: Microstructure evolution, heat treatment, and strengthening mechanisms Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 787: 139470. DOI: 10.1016/J.Msea.2020.139470 |
0.424 |
|
2020 |
Sanjari M, Hadadzadeh A, Pirgazi H, Shahriari A, Amirkhiz BS, Kestens LAI, Mohammadi M. Selective laser melted stainless steel CX: Role of built orientation on microstructure and micro-mechanical properties Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 786: 139365. DOI: 10.1016/J.Msea.2020.139365 |
0.785 |
|
2020 |
Alghamdi F, Song X, Hadadzadeh A, Shalchi-Amirkhiz B, Mohammadi M, Haghshenas M. Post heat treatment of additive manufactured AlSi10Mg: On silicon morphology, texture and small-scale properties Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 783: 139296. DOI: 10.1016/J.Msea.2020.139296 |
0.424 |
|
2020 |
Shamsdini S, Shakerin S, Hadadzadeh A, Amirkhiz BS, Mohammadi M. A trade-off between powder layer thickness and mechanical properties in additively manufactured maraging steels Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 776: 139041. DOI: 10.1016/J.Msea.2020.139041 |
0.452 |
|
2020 |
Dharmendra C, Hadadzadeh A, Amirkhiz B, Lloyd A, Mohammadi M. Deformation mechanisms and fracture of electron beam melted Ti–6Al–4V Materials Science and Engineering: A. 771: 138652. DOI: 10.1016/J.Msea.2019.138652 |
0.466 |
|
2020 |
Dharmendra C, Alaghmandfard R, Hadadzadeh A, Amirkhiz BS, Mohammadi M. Influence of build orientation on small-scale properties of electron beam melted Ti-6Al-4V Materials Letters. 266: 126970. DOI: 10.1016/J.Matlet.2019.126970 |
0.401 |
|
2020 |
Dehgahi S, Ghoncheh MH, Hadadzadeh A, Sanjari M, Amirkhiz BS, Mohammadi M. The role of titanium on the microstructure and mechanical properties of additively manufactured C300 maraging steels Materials & Design. 194: 108965. DOI: 10.1016/J.Matdes.2020.108965 |
0.788 |
|
2020 |
Asl MS, Delbari SA, Azadbeh M, Namini AS, Mehrabian M, Nguyen V, Le QV, Shokouhimehr M, Mohammadi M. Nanoindentational and conventional mechanical properties of spark plasma sintered Ti–Mo alloys Journal of Materials Research and Technology. 9: 10647-10658. DOI: 10.1016/J.Jmrt.2020.07.066 |
0.494 |
|
2020 |
Nguyen V, Delbari SA, Asl MS, Namini AS, Kakroudi MG, Azizian-Kalandaragh Y, Le QV, Mohammadi M, Shokouhimehr M. Role of hot-pressing temperature on densification and microstructure of ZrB2–SiC ultrahigh temperature ceramics International Journal of Refractory Metals & Hard Materials. 93: 105355. DOI: 10.1016/J.Ijrmhm.2020.105355 |
0.375 |
|
2020 |
Nguyen V, Delbari SA, Asl MS, Le QV, Jang HW, Shokouhimehr M, Mohammadi M, Namini AS. A novel TiC-based composite co-strengthened with AlN particulates and graphene nano-platelets International Journal of Refractory Metals & Hard Materials. 92: 105331. DOI: 10.1016/J.Ijrmhm.2020.105331 |
0.35 |
|
2020 |
Fattahi M, Asl MS, Delbari SA, Namini AS, Ahmadi Z, Mohammadi M. Role of nano-WC addition on microstructural, mechanical and thermal characteristics of TiC–SiCw composites International Journal of Refractory Metals & Hard Materials. 90: 105248. DOI: 10.1016/J.Ijrmhm.2020.105248 |
0.436 |
|
2020 |
Ghoncheh MH, Sanjari M, Cyr E, Kelly J, Pirgazi H, Shakerin S, Hadadzadeh A, Amirkhiz BS, Kestens LAI, Mohammadi M. On the solidification characteristics, deformation, and functionally graded interfaces in additively manufactured hybrid aluminum alloys International Journal of Plasticity. 133: 102840. DOI: 10.1016/J.Ijplas.2020.102840 |
0.787 |
|
2020 |
Tallon J, Cyr E, Lloyd A, Mohammadi M. Crush performance of additively manufactured maraging steel microlattice reinforced plates Engineering Failure Analysis. 108: 104231. DOI: 10.1016/J.Engfailanal.2019.104231 |
0.43 |
|
2020 |
Shahriari A, Khaksar L, Nasiri A, Hadadzadeh A, Amirkhiz BS, Mohammadi M. Microstructure and corrosion behavior of a novel additively manufactured maraging stainless steel Electrochimica Acta. 339: 135925. DOI: 10.1016/J.Electacta.2020.135925 |
0.486 |
|
2020 |
Asl MS, Pazhouhanfar Y, Namini AS, Shaddel S, Fattahi M, Mohammadi M. Role of graphite nano-flakes on the characteristics of ZrB2-based composites reinforced with SiC whiskers Diamond and Related Materials. 105: 107786. DOI: 10.1016/J.Diamond.2020.107786 |
0.431 |
|
2020 |
Nguyen V, Delbari SA, Ahmadi Z, Namini AS, Le QV, Shokouhimehr M, Asl MS, Mohammadi M. Effects of discrete and simultaneous addition of SiC and Si3N4 on microstructural development of TiB2 ceramics Ceramics International. DOI: 10.1016/J.Ceramint.2020.09.196 |
0.419 |
|
2020 |
Nguyen V, Delbari SA, Namini AS, Ahmadi Z, Le QV, Shokouhimehr M, Asl MS, Mohammadi M. Microstructural evolution of TiB2–SiC composites empowered with Si3N4, BN or TiN: A comparative study Ceramics International. DOI: 10.1016/J.Ceramint.2020.08.214 |
0.383 |
|
2020 |
Asl MS, Nayebi B, Akhlaghi M, Ahmadi Z, Tayebifard SA, Salahi E, Shokouhimehr M, Mohammadi M. A novel ZrB2-based composite manufactured with Ti3AlC2 additive Ceramics International. DOI: 10.1016/J.Ceramint.2020.08.193 |
0.341 |
|
2020 |
Vaferi K, Vajdi M, Nekahi S, Nekahi S, Moghanlou FS, Asl MS, Mohammadi M. Thermo-mechanical simulation of ultrahigh temperature ceramic composites as alternative materials for gas turbine stator blades Ceramics International. DOI: 10.1016/J.Ceramint.2020.08.164 |
0.339 |
|
2020 |
Nguyen V, Delbari SA, Asl MS, Le QV, Shokouhimehr M, Namini AS, Mohammadi M. Microstructure–property correlation in nano-diamond and TiN added TiC-based ceramics Ceramics International. DOI: 10.1016/J.Ceramint.2020.08.152 |
0.429 |
|
2020 |
Nguyen V, Delbari SA, Asl MS, Le QV, Jang HW, Shokouhimehr M, Mohammadi M, Namini AS. A novel spark plasma sintered TiC–ZrN–C composite with enhanced flexural strength Ceramics International. DOI: 10.1016/J.Ceramint.2020.08.073 |
0.346 |
|
2020 |
Nguyen V, Delbari SA, Namini AS, Babapoor A, Le QV, Jang HW, Shokouhimehr M, Asl MS, Mohammadi M. Microstructural, mechanical and friction properties of nano-graphite and h-BN added TiC-based composites Ceramics International. DOI: 10.1016/J.Ceramint.2020.08.068 |
0.412 |
|
2020 |
Xia C, Delbari SA, Ahmadi Z, Asl MS, Kakroudi MG, Le QV, Namini AS, Mohammadi M, Shokouhimehr M. Electron microscopy study of ZrB2–SiC–AlN composites: Hot-pressing vs. pressureless sintering Ceramics International. DOI: 10.1016/J.Ceramint.2020.08.054 |
0.433 |
|
2020 |
Nguyen V, Delbari SA, Ahmadi Z, Asl MS, Kakroudi MG, Le QV, Namini AS, Mohammadi M, Shokouhimehr M. Electron microscopy characterization of porous ZrB2–SiC–AlN composites prepared by pressureless sintering Ceramics International. DOI: 10.1016/J.Ceramint.2020.07.011 |
0.428 |
|
2020 |
Nguyen V, Asl MS, Mahaseni ZH, Germi MD, Delbari SA, Le QV, Ahmadi Z, Shokouhimehr M, Namini AS, Mohammadi M. Role of co-addition of BN and SiC on microstructure of TiB2-based composites densified by SPS method Ceramics International. DOI: 10.1016/J.Ceramint.2020.07.001 |
0.437 |
|
2020 |
Nguyen TP, Asl MS, Delbari SA, Namini AS, Le QV, Shokouhimehr M, Mohammadi M. Electron microscopy investigation of spark plasma sintered ZrO2 added ZrB2–SiC composite Ceramics International. 46: 19646-19649. DOI: 10.1016/J.Ceramint.2020.04.292 |
0.39 |
|
2020 |
Fattahi M, Delbari SA, Babapoor A, Namini AS, Mohammadi M, Asl MS. Triplet carbide composites of TiC, WC, and SiC Ceramics International. 46: 9070-9078. DOI: 10.1016/J.Ceramint.2019.12.155 |
0.434 |
|
2020 |
Bagheri SM, Vajdi M, Moghanlou FS, Sakkaki M, Mohammadi M, Shokouhimehr M, Asl MS. Numerical modeling of heat transfer during spark plasma sintering of titanium carbide Ceramics International. 46: 7615-7624. DOI: 10.1016/J.Ceramint.2019.11.262 |
0.344 |
|
2020 |
Sakkaki M, Moghanlou FS, Vajdi M, Asl MS, Mohammadi M, Shokouhimehr M. Numerical simulation of heat transfer during spark plasma sintering of zirconium diboride Ceramics International. 46: 4998-5007. DOI: 10.1016/J.Ceramint.2019.10.240 |
0.312 |
|
2020 |
Dharmendra C, Amirkhiz BS, Lloyd A, Ram GDJ, Mohammadi M. Wire-arc additive manufactured nickel aluminum bronze with enhanced mechanical properties using heat treatments cycles Additive Manufacturing. 36: 101510. DOI: 10.1016/J.Addma.2020.101510 |
0.408 |
|
2020 |
Alaghmandfard R, Chalasani D, Hadadzadeh A, Amirkhiz BS, Odeshi A, Mohammadi M. Dynamic compressive response of electron beam melted Ti–6Al–4V under elevated strain rates: Microstructure and constitutive models Additive Manufacturing. 35: 101347. DOI: 10.1016/J.Addma.2020.101347 |
0.495 |
|
2020 |
Hadadzadeh A, Amirkhiz BS, Shakerin S, Kelly J, Li J, Mohammadi M. Microstructural investigation and mechanical behavior of a two-material component fabricated through selective laser melting of AlSi10Mg on an Al-Cu-Ni-Fe-Mg cast alloy substrate Additive Manufacturing. 31: 100937. DOI: 10.1016/J.Addma.2019.100937 |
0.497 |
|
2020 |
Pirgazi H, Sanjari M, Tamimi S, Amirkhiz BS, Kestens LAI, Mohammadi M. Texture evolution in selective laser melted maraging stainless steel CX with martensitic transformation Journal of Materials Science. 1-10. DOI: 10.1007/S10853-020-05290-2 |
0.771 |
|
2019 |
Amirkhiz BS, Chalasani D, Mohammadi M. TEM Study of Additively Manufactured Metallic Alloys: Nickel Aluminum Bronze Microscopy and Microanalysis. 25: 2588-2589. DOI: 10.1017/S1431927619013679 |
0.399 |
|
2019 |
Hadadzadeh A, Amirkhiz BS, Mohammadi M. Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 739: 295-300. DOI: 10.1016/J.Msea.2018.10.055 |
0.465 |
|
2019 |
Fathi P, Rafieazad M, Duan X, Mohammadi M, Nasiri AM. On microstructure and corrosion behaviour of AlSi10Mg alloy with low surface roughness fabricated by direct metal laser sintering Corrosion Science. 157: 126-145. DOI: 10.1016/J.Corsci.2019.05.032 |
0.442 |
|
2019 |
Dharmendra C, Hadadzadeh A, Amirkhiz BS, Ram GDJ, Mohammadi M. Microstructural evolution and mechanical behavior of nickel aluminum bronze Cu-9Al-4Fe-4Ni-1Mn fabricated through wire-arc additive manufacturing Additive Manufacturing. 30: 100872. DOI: 10.1016/J.Addma.2019.100872 |
0.454 |
|
2019 |
Shakerin S, Hadadzadeh A, Amirkhiz BS, Shamsdini S, Li J, Mohammadi M. Additive manufacturing of maraging steel-H13 bimetals using laser powder bed fusion technique Additive Manufacturing. 29: 100797. DOI: 10.1016/J.Addma.2019.100797 |
0.474 |
|
2019 |
Rafieazad M, Mohammadi M, Nasiri AM. On microstructure and early stage corrosion performance of heat treated direct metal laser sintered AlSi10Mg Additive Manufacturing. 28: 107-119. DOI: 10.1016/J.Addma.2019.04.023 |
0.416 |
|
2019 |
Hadadzadeh A, Amirkhiz BS, Odeshi A, Li J, Mohammadi M. Role of hierarchical microstructure of additively manufactured AlSi10Mg on dynamic loading behavior Additive Manufacturing. 28: 1-13. DOI: 10.1016/J.Addma.2019.04.012 |
0.452 |
|
2019 |
Kazemipour M, Mohammadi M, Mfoumou E, Nasiri AM. Microstructure and Corrosion Characteristics of Selective Laser-Melted 316L Stainless Steel: The Impact of Process-Induced Porosities Jom. 71: 3230-3240. DOI: 10.1007/S11837-019-03647-W |
0.441 |
|
2019 |
Fathi P, Mohammadi M, Duan X, Nasiri AM. Effects of Surface Finishing Procedures on Corrosion Behavior of DMLS-AlSi10Mg_200C Alloy Versus Die-Cast A360.1 Aluminum Jom. 71: 1748-1759. DOI: 10.1007/S11837-019-03344-8 |
0.375 |
|
2018 |
Baxter C, Cyr E, Odeshi A, Mohammadi M. Constitutive models for the dynamic behaviour of direct metal laser sintered AlSi10Mg_200C under high strain rate shock loading Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 731: 296-308. DOI: 10.1016/J.Msea.2018.06.040 |
0.466 |
|
2018 |
Cyr ED, Brahme A, Mohammadi M, Mishra RK, Inal K. A new crystal plasticity framework to simulate the large strain behaviour of aluminum alloys at warm temperatures Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 727: 11-28. DOI: 10.1016/J.Msea.2018.04.020 |
0.698 |
|
2018 |
Hadadzadeh A, Amirkhiz BS, Li J, Odeshi A, Mohammadi M. Deformation mechanism during dynamic loading of an additively manufactured AlSi10Mg_200C Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 722: 263-268. DOI: 10.1016/J.Msea.2018.03.014 |
0.325 |
|
2018 |
Asgari H, Mohammadi M. Microstructure and mechanical properties of stainless steel CX manufactured by Direct Metal Laser Sintering Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 709: 82-89. DOI: 10.1016/J.Msea.2017.10.045 |
0.499 |
|
2018 |
Kelly J, Mohammadi M. Uniaxial tensile behavior of sheet molded composite car hoods with different fibre contents under quasi-static strain rates Mechanics Research Communications. 87: 42-52. DOI: 10.1016/J.Mechrescom.2017.12.007 |
0.443 |
|
2018 |
Cyr E, Asgari H, Shamsdini S, Purdy M, Hosseinkhani K, Mohammadi M. Fracture behaviour of additively manufactured MS1-H13 hybrid hard steels Materials Letters. 212: 174-177. DOI: 10.1016/J.Matlet.2017.10.097 |
0.357 |
|
2018 |
Asgari H, Odeshi A, Hosseinkhani K, Mohammadi M. On dynamic mechanical behavior of additively manufactured AlSi10Mg_200C Materials Letters. 211: 187-190. DOI: 10.1016/J.Matlet.2017.10.001 |
0.424 |
|
2018 |
Hadadzadeh A, Amirkhiz BS, Odeshi A, Mohammadi M. Dynamic loading of direct metal laser sintered AlSi10Mg alloy: Strengthening behavior in different building directions Materials & Design. 159: 201-211. DOI: 10.1016/J.Matdes.2018.08.045 |
0.465 |
|
2018 |
Fathi P, Mohammadi M, Duan X, Nasiri AM. A comparative study on corrosion and microstructure of direct metal laser sintered AlSi10Mg_200C and die cast A360.1 aluminum Journal of Materials Processing Technology. 259: 1-14. DOI: 10.1016/J.Jmatprotec.2018.04.013 |
0.473 |
|
2018 |
Cyr E, Lloyd A, Mohammadi M. Tension-compression asymmetry of additively manufactured Maraging steel Journal of Manufacturing Processes. 35: 289-294. DOI: 10.1016/J.Jmapro.2018.08.015 |
0.45 |
|
2018 |
Hadadzadeh A, Amirkhiz BS, Li J, Mohammadi M. Columnar to equiaxed transition during direct metal laser sintering of AlSi10Mg alloy: Effect of building direction Additive Manufacturing. 23: 121-131. DOI: 10.1016/J.Addma.2018.08.001 |
0.485 |
|
2018 |
Hadadzadeh A, Baxter C, Amirkhiz BS, Mohammadi M. Strengthening mechanisms in direct metal laser sintered AlSi10Mg: Comparison between virgin and recycled powders Additive Manufacturing. 23: 108-120. DOI: 10.1016/J.Addma.2018.07.014 |
0.498 |
|
2018 |
Ebrahimi A, Mohammadi M. Numerical tools to investigate mechanical and fatigue properties of additively manufactured MS1-H13 hybrid steels Additive Manufacturing. 23: 381-393. DOI: 10.1016/J.Addma.2018.07.009 |
0.425 |
|
2018 |
Mohammadi M, Asgari H. Achieving low surface roughness AlSi10Mg_200C parts using direct metal laser sintering Additive Manufacturing. 20: 23-32. DOI: 10.1016/J.Addma.2017.12.012 |
0.429 |
|
2017 |
Asgari H, Baxter C, Hosseinkhani K, Mohammadi M. On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 707: 148-158. DOI: 10.1016/J.Msea.2017.09.041 |
0.463 |
|
2017 |
Cyr E, Mohammadi M, Brahme A, Mishra RK, Inal K. Modeling the formability of aluminum alloys at elevated temperatures using a new thermo-elasto-viscoplastic crystal plasticity framework International Journal of Mechanical Sciences. 128: 312-325. DOI: 10.1016/J.Ijmecsci.2017.05.005 |
0.666 |
|
2017 |
Asgari H, Saha G, Mohammadi M. Tribological behavior of nanostructured high velocity oxy-fuel (HVOF) thermal sprayed WC-17NiCr coatings Ceramics International. 43: 2123-2135. DOI: 10.1016/J.Ceramint.2016.10.193 |
0.365 |
|
2016 |
Kohar CP, Mohammadi M, Mishra RK, Inal K. The effects of the yield surface curvature and anisotropy constants on the axial crush response of circular crush tubes Thin-Walled Structures. 106: 28-50. DOI: 10.1016/J.Tws.2016.04.021 |
0.667 |
|
2016 |
Lévesque J, Mohammadi M, Mishra RK, Inal K. An extended Taylor model to simulate localized deformation phenomena in magnesium alloys International Journal of Plasticity. 78: 203-222. DOI: 10.1016/J.Ijplas.2015.10.012 |
0.674 |
|
2016 |
Mohammadi M, Saha GC, Akbarzadeh AH. Elastic field in composite cylinders made of functionally graded coatings International Journal of Engineering Science. 101: 156-170. DOI: 10.1016/J.Ijengsci.2015.12.011 |
0.353 |
|
2016 |
Sabiston T, Mohammadi M, Cherkaoui M, Lévesque J, Inal K. Micromechanics based elasto-visco-plastic response of long fibre composites using functionally graded interphases at quasi-static and moderate strain rates Composites Part B-Engineering. 100: 31-43. DOI: 10.1016/J.Compositesb.2016.06.035 |
0.671 |
|
2016 |
Sabiston T, Mohammadi M, Cherkaoui M, Lévesque J, Inal K. Micromechanics for a long fibre reinforced composite model with a functionally graded interphase Composites Part B: Engineering. 84: 188-199. DOI: 10.1016/J.Compositesb.2015.08.070 |
0.65 |
|
2015 |
Mohammadi M. Axisymmetric and one-dimensional thermoelastic fields of radially graded bodies Journal of Thermal Stresses. 38: 716-732. DOI: 10.1080/01495739.2015.1039927 |
0.306 |
|
2015 |
Kohar CP, Mohammadi M, Mishra RK, Inal K. Effects of elastic-plastic behaviour on the axial crush response of square tubes Thin-Walled Structures. 93: 64-87. DOI: 10.1016/J.Tws.2015.02.023 |
0.658 |
|
2015 |
Cyr ED, Mohammadi M, Mishra RK, Inal K. A three dimensional (3D) thermo-elasto-viscoplastic constitutive model for FCC polycrystals International Journal of Plasticity. 70: 166-190. DOI: 10.1016/J.Ijplas.2015.04.001 |
0.683 |
|
2015 |
Muhammad W, Mohammadi M, Kang J, Mishra RK, Inal K. An elasto-plastic constitutive model for evolving asymmetric/anisotropic hardening behavior of AZ31B and ZEK100 magnesium alloy sheets considering monotonic and reverse loading paths International Journal of Plasticity. 70: 30-59. DOI: 10.1016/J.Ijplas.2015.03.004 |
0.688 |
|
2014 |
Mohammadi M, Brahme AP, Mishra RK, Inal K. Effects of post-necking hardening behavior and equivalent stress-strain curves on the accuracy of M-K based forming limit diagrams Computational Materials Science. 85: 316-323. DOI: 10.1016/J.Commatsci.2014.01.017 |
0.655 |
|
2008 |
Mohammadi M, Dryden JR. Thermal stress in a nonhomogeneous curved beam Journal of Thermal Stresses. 31: 587-598. DOI: 10.1080/01495730801978471 |
0.325 |
|
Show low-probability matches. |