| Year |
Citation |
Score |
| 2020 |
Hsu T, Mahbub R, Mason JH, Epting WK, Abernathy HW, Hackett GA, Rollett AD, Litster S, Salvador PA. High performance modeling of heterogeneous SOFC electrode microstructures using the MOOSE framework: ERMINE (Electrochemical Reactions in MIcrostructural NEtworks). Methodsx. 7: 100822. PMID 32195139 DOI: 10.1016/J.Mex.2020.100822 |
0.34 |
|
| 2020 |
Sridhar SK, Stebner AP, Rollett AD. Statistical variations in predicted martensite variant volume fractions in superelastically deformed NiTi modeled using habit plane variants versus correspondence variants International Journal of Solids and Structures. DOI: 10.1016/J.Ijsolstr.2020.03.023 |
0.323 |
|
| 2020 |
Hsu T, Mason JH, Mahbub R, Epting WK, Abernathy HW, Hackett GA, Rollett AD, Litster S, Salvador PA. Distributions of local electrochemistry in heterogeneous microstructures of solid oxide fuel cells using high-performance computations Electrochimica Acta. 345: 136191. DOI: 10.1016/J.Electacta.2020.136191 |
0.344 |
|
| 2020 |
Lebensohn RA, Rollett AD. Spectral methods for full-field micromechanical modelling of polycrystalline materials Computational Materials Science. 173: 109336. DOI: 10.1016/J.Commatsci.2019.109336 |
0.319 |
|
| 2020 |
Jiang R, Mostafaei A, Wu Z, Choi A, Guan P, Chmielus M, Rollett AD. Effect of heat treatment on microstructural evolution and hardness homogeneity in laser powder bed fusion of alloy 718 Additive Manufacturing. 35: 101282. DOI: 10.1016/J.Addma.2020.101282 |
0.45 |
|
| 2020 |
Bhattacharyya JJ, Nair S, Pagan DC, Tari V, Rollett AD, Agnew SR. In-situ high energy X-ray diffraction study of the elastic response of a metastable β-titanium alloy Acta Materialia. 197: 300-308. DOI: 10.1016/J.Actamat.2020.07.050 |
0.445 |
|
| 2020 |
Wu Z, Narra SP, Rollett A. Exploring the fabrication limits of thin-wall structures in a laser powder bed fusion process The International Journal of Advanced Manufacturing Technology. 110: 191-207. DOI: 10.1007/S00170-020-05827-4 |
0.309 |
|
| 2019 |
Gordon JV, Vinci RP, Hochhalter JD, Rollett AD, Harlow DG. Quantification of location-dependence in a large-scale additively manufactured build through experiments and micromechanical modeling Materialia. 7: 100397. DOI: 10.1016/J.Mtla.2019.100397 |
0.379 |
|
| 2019 |
Jiang R, Mostafaei A, Pauza J, Kantzos C, Rollett AD. Varied heat treatments and properties of laser powder bed printed Inconel 718 Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 755: 170-180. DOI: 10.1016/J.Msea.2019.03.103 |
0.44 |
|
| 2019 |
Wynblatt P, Chatain D, Rollett A, Dahmen U. Origin of an unusual systematic variation in the heteroepitaxy of Ag on Ni – The roles of twinning and step alignment Acta Materialia. 168: 121-132. DOI: 10.1016/J.Actamat.2019.01.049 |
0.36 |
|
| 2019 |
Santos LA, Singh S, Rollett AD. Microstructure and Texture Evolution During Thermomechanical Processing of Al0.25CoCrFeNi High-Entropy Alloy Metallurgical and Materials Transactions A. 50: 5433-5444. DOI: 10.1007/S11661-019-05399-3 |
0.446 |
|
| 2019 |
Nandwana P, Lee Y, Ranger C, Rollett AD, Dehoff RR, Babu SS. Post-processing to Modify the α Phase Micro-Texture and β Phase Grain Morphology in Ti-6Al-4V Fabricated by Powder Bed Electron Beam Melting Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 3429-3439. DOI: 10.1007/S11661-019-05247-4 |
0.332 |
|
| 2018 |
Mandal S, Lao J, Donegan S, Rollett AD. Generation of statistically representative synthetic three-dimensional microstructures Scripta Materialia. 146: 128-132. DOI: 10.1016/J.Scriptamat.2017.11.034 |
0.393 |
|
| 2018 |
Voisin T, Calta NP, Khairallah SA, Forien JB, Balogh L, Cunningham RW, Rollett AD, Wang YM. Defects-dictated tensile properties of selective laser melted Ti-6Al-4V Materials & Design. 158: 113-126. DOI: 10.1016/J.Matdes.2018.08.004 |
0.373 |
|
| 2018 |
Alimadadi H, Fanta AB, Akiyoshi R, Kasama T, Rollett AD, Somers MAJ, Pantleon K. Optimal microstructural design for high thermal stability of pure FCC metals based on studying effect of twin boundaries character and network of grain boundaries Materials & Design. 151: 60-73. DOI: 10.1016/J.Matdes.2018.04.056 |
0.455 |
|
| 2018 |
Hsu T, Epting WK, Mahbub R, Nuhfer NT, Bhattacharya S, Lei Y, Miller HM, Ohodnicki PR, Gerdes KR, Abernathy HW, Hackett GA, Rollett AD, De Graef M, Litster S, Salvador PA. Mesoscale characterization of local property distributions in heterogeneous electrodes Journal of Power Sources. 386: 1-9. DOI: 10.1016/J.Jpowsour.2018.03.025 |
0.301 |
|
| 2018 |
Narra SP, Cunningham R, Beuth J, Rollett AD. Location specific solidification microstructure control in electron beam melting of Ti-6Al-4V Additive Manufacturing. 19: 160-166. DOI: 10.1016/J.Addma.2017.10.003 |
0.384 |
|
| 2018 |
Tari V, Lebensohn RA, Pokharel R, Turner TJ, Shade PA, Bernier JV, Rollett AD. Validation of micro-mechanical FFT-based simulations using High Energy Diffraction Microscopy on Ti-7Al Acta Materialia. 154: 273-283. DOI: 10.1016/J.Actamat.2018.05.036 |
0.431 |
|
| 2018 |
Ranger C, Tari V, Farjami S, Merwin MJ, Germain L, Rollett A. Austenite Reconstruction Elucidates Prior Grain Size Dependence of Toughness in a Low Alloy Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 4521-4535. DOI: 10.1007/S11661-018-4825-7 |
0.453 |
|
| 2018 |
Shterner V, Timokhina IB, Rollett AD, Beladi H. The Role of Grain Orientation and Grain Boundary Characteristics in the Mechanical Twinning Formation in a High Manganese Twinning-Induced Plasticity Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 2597-2611. DOI: 10.1007/S11661-018-4606-3 |
0.485 |
|
| 2018 |
Ozturk T, Rollett AD. Effect of microstructure on the elasto-viscoplastic deformation of dual phase titanium structures Computational Mechanics. 61: 55-70. DOI: 10.1007/S00466-017-1467-3 |
0.419 |
|
| 2017 |
Cunningham R, Nicolas A, Madsen J, Fodran E, Anagnostou E, Sangid MD, Rollett AD. Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V Materials Research Letters. 5: 516-525. DOI: 10.1080/21663831.2017.1340911 |
0.33 |
|
| 2017 |
Haghdadi N, Abou-Ras D, Cizek P, Hodgson PD, Rollett AD, Beladi H. Austenite-ferrite interface crystallography dependence of sigma phase precipitation using the five-parameter characterization approach Materials Letters. 196: 264-268. DOI: 10.1016/J.Matlet.2017.03.090 |
0.352 |
|
| 2017 |
Mandal S, Gockel BT, Rollett AD. Application of canonical correlation analysis to a sensitivity study of constitutive model parameter fitting Materials & Design. 132: 30-43. DOI: 10.1016/J.Matdes.2017.06.050 |
0.326 |
|
| 2017 |
Pham M, Creuziger AA, Iadicola MA, Rollett AD. Roles of texture and latent hardening on plastic anisotropy of face-centered-cubic materials during multi-axial loading Journal of the Mechanics and Physics of Solids. 99: 50-69. DOI: 10.1016/J.Jmps.2016.08.011 |
0.331 |
|
| 2017 |
Lee K, Park S, Kang J, Park S, Han SS, Park JY, Oh KH, Lee S, Rollett AD, Han HN. Investigation of the aging behavior and orientation relationships in Fe–31.4Mn–11.4Al–0.89C low-density steel Journal of Alloys and Compounds. 723: 146-156. DOI: 10.1016/J.Jallcom.2017.06.250 |
0.589 |
|
| 2017 |
Mandal S, Gockel BT, Balachandran S, Banerjee D, Rollett AD. Simulation of plastic deformation in Ti-5553 alloy using a self-consistent viscoplastic model International Journal of Plasticity. 94: 57-73. DOI: 10.1016/J.Ijplas.2017.02.008 |
0.4 |
|
| 2017 |
Kim D, Woo W, Park W, Im Y, Rollett A. Mesoscopic coupled modeling of texture formation during recrystallization considering stored energy decomposition Computational Materials Science. 129: 55-65. DOI: 10.1016/J.Commatsci.2016.11.048 |
0.451 |
|
| 2017 |
Beladi H, Tari V, Timokhina IB, Cizek P, Rohrer GS, Rollett AD, Hodgson PD. On the crystallographic characteristics of nanobainitic steel Acta Materialia. 127: 426-437. DOI: 10.1016/J.Actamat.2017.01.058 |
0.331 |
|
| 2017 |
Cunningham R, Narra SP, Montgomery C, Beuth J, Rollett AD. Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V Jom. 69: 479-484. DOI: 10.1007/S11837-016-2234-1 |
0.321 |
|
| 2017 |
Feng Y, Mandal S, Gockel B, Rollett AD. Extension of the Mechanical Threshold Stress Model to Static and Dynamic Strain Aging: Application to AA5754-O Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 5591-5607. DOI: 10.1007/S11661-017-4276-6 |
0.302 |
|
| 2016 |
Rao S, Cunningham R, Ozturk T, Rollett AD. Measurement and Analysis of Porosity in Al-10Si-1Mg Components Additively Manufactured by Selective Laser Melting Materials Performance and Characterization. 5: 20160037. DOI: 10.1520/Mpc20160037 |
0.369 |
|
| 2016 |
Graham JT, Rollett AD, LeSar R. Fast Fourier transform discrete dislocation dynamics Modelling and Simulation in Materials Science and Engineering. 24: 85005. DOI: 10.1088/0965-0393/24/8/085005 |
0.326 |
|
| 2016 |
Abou-Ras D, Schäfer N, Rissom T, Kelly MN, Haarstrich J, Ronning C, Rohrer GS, Rollett AD. Grain-boundary character distribution and correlations with electrical and optoelectronic properties of CuInSe2 thin films Acta Materialia. 118: 244-252. DOI: 10.1016/J.Actamat.2016.07.042 |
0.446 |
|
| 2016 |
Lieberman EJ, Lebensohn RA, Menasche DB, Bronkhorst CA, Rollett AD. Microstructural effects on damage evolution in shocked copper polycrystals Acta Materialia. 116: 270-280. DOI: 10.1016/J.Actamat.2016.06.054 |
0.49 |
|
| 2016 |
Lawrence A, Rickman JM, Harmer MP, Rollett AD. Parsing abnormal grain growth Acta Materialia. 103: 681-687. DOI: 10.1016/J.Actamat.2015.10.034 |
0.459 |
|
| 2016 |
Cunningham R, Narra SP, Ozturk T, Beuth J, Rollett AD. Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography Jom. 1-7. DOI: 10.1007/S11837-015-1802-0 |
0.345 |
|
| 2016 |
Suresh KS, Rollett AD, Suwas S. Evolution of Texture and Microstructure in Deformed and Annealed Copper-Iron Multilayer Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 852-868. DOI: 10.1007/S11661-015-3228-2 |
0.328 |
|
| 2015 |
Pham MS, Iadicola M, Creuziger A, Hu L, Rollett AD. Thermally-activated constitutive model including dislocation interactions, aging and recovery for strain path dependence of solid solution strengthened alloys: Application to AA5754-O. International Journal of Plasticity. 75. PMID 32831468 DOI: 10.1016/J.Ijplas.2014.09.010 |
0.34 |
|
| 2015 |
Jin Y, Bernacki M, Agnoli A, Lin B, Rohrer GS, Rollett AD, Bozzolo N. Evolution of the annealing twin density during δ-Supersolvus grain growth in the nickel-based superalloy Inconel™ 718 Metals. 6. DOI: 10.3390/met6010005 |
0.318 |
|
| 2015 |
Rollett AD, Rohrer GS, Suter RM. Understanding materials microstructure and behavior at the mesoscale Mrs Bulletin. 40: 951-958. DOI: 10.1557/Mrs.2015.262 |
0.424 |
|
| 2015 |
Ozturk T, Stein C, Pokharel R, Hefferan C, Tucker H, Jha S, John R, Lebensohn RA, Kenesei P, Suter RM, Rollett AD. Simulation domain size requirements for elastic response of 3D polycrystalline materials Modelling and Simulation in Materials Science and Engineering. 24. DOI: 10.1088/0965-0393/24/1/015006 |
0.438 |
|
| 2015 |
Tari V, Rollett AD, Kadiri HE, Beladi H, Oppedal AL, King RL. The effect of deformation twinning on stress localization in a three dimensional TWIP steel microstructure Modelling and Simulation in Materials Science and Engineering. 23. DOI: 10.1088/0965-0393/23/4/045010 |
0.413 |
|
| 2015 |
Cerrone A, Stein C, Pokharel R, Hefferan C, Lind J, Tucker H, Suter R, Rollett A, Ingraffea A. Implementation and verification of a microstructure-based capability for modeling microcrack nucleation in LSHR at room temperature Modelling and Simulation in Materials Science and Engineering. 23. DOI: 10.1088/0965-0393/23/3/035006 |
0.465 |
|
| 2015 |
Lieberman EJ, Rollett AD, Lebensohn RA, Kober EM. Calculation of grain boundary normals directly from 3D microstructure images Modelling and Simulation in Materials Science and Engineering. 23. DOI: 10.1088/0965-0393/23/3/035005 |
0.439 |
|
| 2015 |
Tucker JC, Cerrone AR, Ingraffea AR, Rollett AD. Crystal plasticity finite element analysis for René88DT statistical volume element generation Modelling and Simulation in Materials Science and Engineering. 23. DOI: 10.1088/0965-0393/23/3/035003 |
0.435 |
|
| 2015 |
Subedi S, Pokharel R, Rollett AD. Orientation gradients in relation to grain boundaries at varying strain level and spatial resolution Materials Science and Engineering A. 638: 348-356. DOI: 10.1016/J.Msea.2015.04.051 |
0.427 |
|
| 2015 |
Pokharel R, Lind J, Li SF, Kenesei P, Lebensohn RA, Suter RM, Rollett AD. In-situ observation of bulk 3D grain evolution during plastic deformation in polycrystalline Cu International Journal of Plasticity. 67: 217-234. DOI: 10.1016/J.Ijplas.2014.10.013 |
0.453 |
|
| 2015 |
Jin Y, Bozzolo N, Rollett AD, Bernacki M. 2D finite element modeling of misorientation dependent anisotropic grain growth in polycrystalline materials: Level set versus multi-phase-field method Computational Materials Science. 104: 108-123. DOI: 10.1016/J.Commatsci.2015.03.012 |
0.451 |
|
| 2015 |
Rickman JM, Lawrence A, Rollett AD, Harmer MP. Calculating probability densities associated with grain-size distributions Computational Materials Science. 101: 211-215. DOI: 10.1016/J.Commatsci.2015.01.030 |
0.394 |
|
| 2015 |
Lin B, Jin Y, Hefferan CM, Li SF, Lind J, Suter RM, Bernacki M, Bozzolo N, Rollett AD, Rohrer GS. Observation of annealing twin nucleation at triple lines in nickel during grain growth Acta Materialia. 99: 63-68. DOI: 10.1016/J.Actamat.2015.07.041 |
0.496 |
|
| 2015 |
Frazier WE, Rohrer GS, Rollett AD. Abnormal grain growth in the Potts model incorporating grain boundary complexion transitions that increase the mobility of individual boundaries Acta Materialia. 96: 390-398. DOI: 10.1016/J.Actamat.2015.06.033 |
0.432 |
|
| 2015 |
Donegan SP, Rollett AD. Simulation of residual stress and elastic energy density in thermal barrier coatings using fast Fourier transforms Acta Materialia. 96: 212-228. DOI: 10.1016/J.Actamat.2015.06.019 |
0.351 |
|
| 2015 |
Ratanaphan S, Olmsted DL, Bulatov VV, Holm EA, Rollett AD, Rohrer GS. Grain boundary energies in body-centered cubic metals Acta Materialia. 88: 346-354. DOI: 10.1016/J.Actamat.2015.01.069 |
0.453 |
|
| 2015 |
Jin Y, Lin B, Rollett AD, Rohrer GS, Bernacki M, Bozzolo N. Thermo-mechanical factors influencing annealing twin development in nickel during recrystallization Journal of Materials Science. 50: 5191-5203. DOI: 10.1007/S10853-015-9067-0 |
0.449 |
|
| 2014 |
Pham MS, Rollett AD, Creuziger A, Iadicola MA, Foecke T. Constitutive modeling based on evolutionary multi-junctions of dislocations Key Engineering Materials. 611: 1771-1776. DOI: 10.4028/Www.Scientific.Net/Kem.611-612.1771 |
0.334 |
|
| 2014 |
Pokharel R, Lind J, Kanjarla AK, Lebensohn RA, Li SF, Kenesei P, Suter RM, Rollett AD. Polycrystal plasticity: Comparison between grain - Scale observations of deformation and simulations Annual Review of Condensed Matter Physics. 5: 317-346. DOI: 10.1146/Annurev-Conmatphys-031113-133846 |
0.406 |
|
| 2014 |
Liu Q, Bhattacharya S, Helmick L, Donegan SP, Rollett AD, Rohrer GS, Salvador PA. Crystallography of interfaces and grain size distributions in Sr -doped LaMnO3 Journal of the American Ceramic Society. 97: 2623-2630. DOI: 10.1111/Jace.12984 |
0.429 |
|
| 2014 |
Lee SB, Rohrer GS, Rollett AD. Three-dimensional digital approximations of grain boundary networks in polycrystals Modelling and Simulation in Materials Science and Engineering. 22. DOI: 10.1088/0965-0393/22/2/025017 |
0.446 |
|
| 2014 |
Jin Y, Lin B, Bernacki M, Rohrer GS, Rollett AD, Bozzolo N. Annealing twin development during recrystallization and grain growth in pure nickel Materials Science and Engineering A. 597: 295-303. DOI: 10.1016/J.Msea.2014.01.018 |
0.453 |
|
| 2014 |
Stein CA, Cerrone A, Ozturk T, Lee S, Kenesei P, Tucker H, Pokharel R, Lind J, Hefferan C, Suter RM, Ingraffea AR, Rollett AD. Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy Current Opinion in Solid State and Materials Science. 18: 244-252. DOI: 10.1016/J.Cossms.2014.06.001 |
0.351 |
|
| 2014 |
Liu X, Warren AP, Nuhfer NT, Rollett AD, Coffey KR, Barmak K. Comparison of crystal orientation mapping-based and image-based measurement of grain size and grain size distribution in a thin aluminum film Acta Materialia. 79: 138-145. DOI: 10.1016/J.Actamat.2014.07.014 |
0.449 |
|
| 2014 |
Lind J, Li SF, Pokharel R, Lienert U, Rollett AD, Suter RM. Tensile twin nucleation events coupled to neighboring slip observed in three dimensions Acta Materialia. 76: 213-220. DOI: 10.1016/J.Actamat.2014.04.050 |
0.41 |
|
| 2014 |
Liu X, Nuhfer NT, Rollett AD, Sinha S, Lee SB, Carpenter JS, Ledonne JE, Darbal A, Barmak K. Interfacial orientation and misorientation relationships in nanolamellar Cu/Nb composites using transmission-electron-microscope-based orientation and phase mapping Acta Materialia. 64: 333-344. DOI: 10.1016/J.Actamat.2013.10.046 |
0.317 |
|
| 2014 |
Beladi H, Rohrer GS, Rollett AD, Tari V, Hodgson PD. The distribution of intervariant crystallographic planes in a lath martensite using five macroscopic parameters Acta Materialia. 63: 86-98. DOI: 10.1016/J.Actamat.2013.10.010 |
0.429 |
|
| 2014 |
Choi YS, Groeber MA, Shade PA, Turner TJ, Schuren JC, Dimiduk DM, Uchic MD, Rollett AD. Crystal Plasticity Finite Element Method Simulations for a Polycrystalline Ni Micro-Specimen Deformed in Tension Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 6352-6359. DOI: 10.1007/S11661-014-2556-Y |
0.395 |
|
| 2013 |
Darbal AD, Ganesh KJ, Liu X, Lee SB, Ledonne J, Sun T, Yao B, Warren AP, Rohrer GS, Rollett AD, Ferreira PJ, Coffey KR, Barmak K. Grain boundary character distribution of nanocrystalline Cu thin films using stereological analysis of transmission electron microscope orientation maps. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 19: 111-9. PMID 23380005 DOI: 10.1017/S1431927612014055 |
0.436 |
|
| 2013 |
Lin B, Rohrer GS, Rollett AD, Jin Y, Bozzolo N, Bernacki M. Evolution of microstructure in pure nickel during processing for grain boundary engineering Materials Science Forum. 753: 97-100. DOI: 10.4028/Www.Scientific.Net/Msf.753.97 |
0.459 |
|
| 2013 |
Li H, Lee S, Rollett AD. Study of the effect of pinning particles on grain size distributions Materials Science Forum. 753: 361-366. DOI: 10.4028/Www.Scientific.Net/Msf.753.361 |
0.412 |
|
| 2013 |
Hutchinson B, Lindell D, Nave M, Rollett A. Development of boundary misorientations during grain growth in silicon steels Materials Science Forum. 753: 311-316. DOI: 10.4028/Www.Scientific.Net/Msf.753.311 |
0.485 |
|
| 2013 |
Jin Y, Bernacki M, Rohrer GS, Rollett AD, Lin B, Bozzolo N. Formation of annealing twins during recrystallization and grain growth in 304L austenitic stainless steel Materials Science Forum. 753: 113-116. DOI: 10.4028/Www.Scientific.Net/Msf.753.113 |
0.474 |
|
| 2013 |
Barabash RI, Rollett A, Lebensohn RA, Barabash OM, Liu W, Pang JWL. Twin boundary-induced intrinsic strengthening in Ni Thin Solid Films. 530: 14-19. DOI: 10.1016/J.Tsf.2012.03.106 |
0.432 |
|
| 2013 |
Pathak S, Doherty RD, Rollett AD, Michler J, Wasmer K. Caught in the act: Grain-switching and quadrijunction formation in annealed aluminum Scripta Materialia. 69: 37-40. DOI: 10.1016/J.Scriptamat.2013.03.014 |
0.653 |
|
| 2013 |
Barmak K, Eggeling E, Kinderlehrer D, Sharp R, Ta'Asan S, Rollett AD, Coffey KR. Grain growth and the puzzle of its stagnation in thin films: The curious tale of a tail and an ear Progress in Materials Science. 58: 987-1055. DOI: 10.1016/J.Pmatsci.2013.03.004 |
0.491 |
|
| 2013 |
Ayad A, Wagner F, Rouag N, Rollett AD. Accelerated Potts model for grain growth - Application to an IF steel Computational Materials Science. 68: 189-197. DOI: 10.1016/J.Commatsci.2012.10.017 |
0.498 |
|
| 2013 |
Donegan SP, Tucker JC, Rollett AD, Barmak K, Groeber M. Extreme value analysis of tail departure from log-normality in experimental and simulated grain size distributions Acta Materialia. 61: 5595-5604. DOI: 10.1016/J.Actamat.2013.06.001 |
0.443 |
|
| 2013 |
Field DP, Lewis A, Rollett AD, Wright SI. Foreword: Quantification of texture and microstructure gradients in polycrystalline materials Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 4880. DOI: 10.1007/S11661-013-1908-3 |
0.354 |
|
| 2013 |
Suresh KS, Rollett AD, Suwas S. Evolution of microstructure and texture during deformation and recrystallization of heavily rolled Cu-Cu multilayer Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 3866-3881. DOI: 10.1007/S11661-013-1749-0 |
0.396 |
|
| 2013 |
Semiatin SL, McClary KE, Rollett AD, Roberts CG, Payton EJ, Zhang F, Gabb TP. Plastic flow and microstructure evolution during thermomechanical processing of a pm nickel-base superalloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 2778-2798. DOI: 10.1007/S11661-013-1675-1 |
0.439 |
|
| 2012 |
Fjeldberg E, Holm E, Rollett AD, Marthinsen K. Mobility driven abnormal grain growth in the presence of particles Materials Science Forum. 715: 930-935. DOI: 10.4028/Www.Scientific.Net/Msf.715-716.930 |
0.403 |
|
| 2012 |
Kar D, Sintay SD, Rohrer GS, Rollett AD. Role of inclination dependent anisotropy on boundary populations during two-dimensional grain growth Materials Science Forum. 715: 697-702. DOI: 10.4028/Www.Scientific.Net/Msf.715-716.697 |
0.819 |
|
| 2012 |
Chan LH, Rohrer G, Rollett A. Synthesizing annealing twins in three-dimensional voxel-based microstructures Materials Science Forum. 715: 549. DOI: 10.4028/Www.Scientific.Net/Msf.715-716.549 |
0.489 |
|
| 2012 |
Barmak K, Eggeling E, Sharp R, Roberts S, Shyu T, Sun T, Yao B, Ta'asan S, Kinderlehrer D, Rollett A, Coffey K. Grain growth and the puzzle of its stagnation in thin films: A detailed comparison of experiments and simulations Materials Science Forum. 715: 473-479. DOI: 10.4028/Www.Scientific.Net/Msf.715-716.473 |
0.472 |
|
| 2012 |
Hefferan CM, Li SF, Lind J, Lienert U, Rollett AD, Suter RM. In-situ observation of recovery and grain growth in high purity aluminum Materials Science Forum. 715: 447-454. DOI: 10.4028/Www.Scientific.Net/Msf.715-716.447 |
0.486 |
|
| 2012 |
Wang S, Rollett AD, Holm EA. Recrystallized grain size in single phase materials Materials Science Forum. 715: 361-366. DOI: 10.4028/Www.Scientific.Net/Msf.715-716.361 |
0.465 |
|
| 2012 |
Arita Y, Chan L, Sintay SD, Rollett AD, Co K. Texture change during grain growth in non-oriented electrical steel Materials Science Forum. 715: 33-40. DOI: 10.4028/www.scientific.net/MSF.715-716.33 |
0.803 |
|
| 2012 |
Uyar F, Wilson S, Winning M, Rollett AD. Simulation of grain growth under the effect of stress Materials Science Forum. 715: 197-202. DOI: 10.4028/Www.Scientific.Net/Msf.715-716.197 |
0.462 |
|
| 2012 |
Suwas S, Suresh KS, Rollett AD. Texture and microstructure evolution during cold rolling of Cu-Fe laminates prepared by accumulative roll bonding Materials Science Forum. 715: 170. DOI: 10.4028/Www.Scientific.Net/Msf.715-716.170 |
0.325 |
|
| 2012 |
Ko KJ, Rollett AD, Hwang NM. Monte-Carlo simulation of Goss abnormal grain growth in Fe-3%Si steel by sub-boundary enhanced solid-state wetting Materials Science Forum. 715: 146-151. DOI: 10.4028/Www.Scientific.Net/Msf.715-716.146 |
0.494 |
|
| 2012 |
Pokharel R, Li SF, Lind J, Hefferan CM, Lienert U, Lebensohn RA, Suter RM, Rollett AD. Quantifying damage accumulation using state-of-the-art FFT method Materials Science Forum. 702: 515-518. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.515 |
0.384 |
|
| 2012 |
Konijnenberg PJ, Zaefferer S, Lee SB, Rollett AD, Rohrer GS, Raabe D. Advanced methods and tools for reconstruction and analysis of grain boundaries from 3D-EBSD data sets Materials Science Forum. 702: 475-478. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.475 |
0.663 |
|
| 2012 |
Rollett AD, Wagner F, Allain-Bonasso N, Field DP, Lebensohne RA. Comparison of gradients in orientation and stress between experiment and simulation Materials Science Forum. 702: 463-468. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.463 |
0.439 |
|
| 2012 |
Li SF, Lind J, Hefferan CM, Pokharel R, Lienert U, Rollett AD, Suter RM. Three-dimensional plastic response in polycrystalline copper via near-field high-energy X-ray diffraction microscopy Journal of Applied Crystallography. 45: 1098-1108. DOI: 10.1107/S0021889812039519 |
0.383 |
|
| 2012 |
Sintay SD, Rollett AD. Testing the accuracy of microstructure reconstruction in three dimensions using phantoms Modelling and Simulation in Materials Science and Engineering. 20. DOI: 10.1088/0965-0393/20/7/075005 |
0.766 |
|
| 2012 |
Liu X, Nuhfer T, Ledonne J, Lee S, Rollett A, Barmak K, Carpenter J, Darbal A. Precession-Assisted Nanoscale Phase and Crystal Orientation Mapping of Cu-Nb Composites in the Transmission Electron Microscope Microscopy and Microanalysis. 18: 1426-1427. DOI: 10.1017/S1431927612008987 |
0.592 |
|
| 2012 |
Carpenter JS, Liu X, Darbal A, Nuhfer NT, McCabe RJ, Vogel SC, Ledonne JE, Rollett AD, Barmak K, Beyerlein IJ, Mara NA. A comparison of texture results obtained using precession electron diffraction and neutron diffraction methods at diminishing length scales in ordered bimetallic nanolamellar composites Scripta Materialia. 67: 336-339. DOI: 10.1016/J.Scriptamat.2012.05.018 |
0.427 |
|
| 2012 |
Tucker JC, Chan LH, Rohrer GS, Groeber MA, Rollett AD. Comparison of grain size distributions in a Ni-based superalloy in three and two dimensions using the Saltykov method Scripta Materialia. 66: 554-557. DOI: 10.1016/J.Scriptamat.2012.01.001 |
0.346 |
|
| 2012 |
Shin EJ, Jung A, Choi SH, Rollett AD, Park SS. A theoretical prediction of twin variants in extruded AZ31 Mg alloys using the microstructure based crystal plasticity finite element method Materials Science and Engineering A. 538: 190-201. DOI: 10.1016/J.Msea.2012.01.028 |
0.352 |
|
| 2012 |
Iadicola MA, Hu L, Rollett AD, Foecke T. Crystal plasticity analysis of constitutive behavior of 5754 aluminum sheet deformed along bi-linear strain paths International Journal of Solids and Structures. 49: 3507-3516. DOI: 10.1016/J.Ijsolstr.2012.03.015 |
0.363 |
|
| 2012 |
Hefferan CM, Lind J, Li SF, Lienert U, Rollett AD, Suter RM. Observation of recovery and recrystallization in high-purity aluminum measured with forward modeling analysis of high-energy diffraction microscopy Acta Materialia. 60: 4311-4318. DOI: 10.1016/J.Actamat.2012.04.020 |
0.428 |
|
| 2012 |
Lee SB, Ledonne JE, Lim SCV, Beyerlein IJ, Rollett AD. The heterophase interface character distribution of physical vapor-deposited and accumulative roll-bonded Cu-Nb multilayer composites Acta Materialia. 60: 1747-1761. DOI: 10.1016/J.Actamat.2011.12.007 |
0.639 |
|
| 2012 |
Zhang L, Rollett AD, Bartel T, Wu D, Lusk MT. A calibrated Monte Carlo approach to quantify the impacts of misorientation and different driving forces on texture development Acta Materialia. 60: 1201-1210. DOI: 10.1016/J.Actamat.2011.10.057 |
0.429 |
|
| 2012 |
Semiatin SL, McClary KE, Rollett AD, Roberts CG, Payton EJ, Zhang F, Gabb TP. Microstructure evolution during supersolvus heat treatment of a powder metallurgy nickel-base superalloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 1649-1661. DOI: 10.1007/S11661-011-1035-Y |
0.35 |
|
| 2012 |
Hu L, Rollett AD, Iadicola M, Foecke T, Banovic S. Constitutive relations for AA 5754 based on crystal plasticity Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 854-869. DOI: 10.1007/S11661-011-0927-1 |
0.351 |
|
| 2012 |
Tucker JC, Chan LH, Rohrer GS, Groeber MA, Rollett AD. Tail departure of log-normal grain size distributions in synthetic three-dimensional microstructures Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 2810-2822. DOI: 10.1007/S11661-011-0851-4 |
0.417 |
|
| 2012 |
Stein C, Lee S, Rollett A. An analysis of fatigue crack initiation using 2D orientation mapping and full-field simulation of elastic stress response Proceedings of the International Symposium On Superalloys. 439-444. DOI: 10.1002/9781118516430.Ch48 |
0.583 |
|
| 2012 |
Stein C, Lee S, Rollett A. An analysis of fatigue crack initiation using 2D orientation mapping and full-field simulation of elastic stress response Proceedings of the International Symposium On Superalloys. 439-444. DOI: 10.1002/9781118516430.ch48 |
0.54 |
|
| 2011 |
Bennett TA, Kalu PN, Rollett AD. Strain-induced selective growth in 1.5% temper-rolled Fe;1%Si. Microscopy and Microanalysis : the Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada. 17: 362-7. PMID 21600070 DOI: 10.1017/S1431927611000377 |
0.691 |
|
| 2011 |
Robertson IM, Schuh CA, Vetrano JS, Browning ND, Field DP, Jensen DJ, Miller MK, Baker I, Dunand DC, Dunin-Borkowski R, Kabius B, Kelly T, Lozano-Perez S, Misra A, Rohrer GS, ... Rollett AD, et al. Towards an integrated materials characterization toolbox Journal of Materials Research. 26: 1341-1383. DOI: 10.1557/Jmr.2011.41 |
0.503 |
|
| 2011 |
Kota N, Rollett AD, Ozdoganlar OB. A Rate-Sensitive Plasticity-Based Model for Machining of fcc Single-Crystals—Part II: Model Calibration and Validation Journal of Manufacturing Science and Engineering. 133. DOI: 10.1115/1.4004135 |
0.305 |
|
| 2011 |
Hochhalter JD, Littlewood DJ, Veilleux MG, Bozek JE, Maniatty AM, Rollett AD, Ingraffea AR. A geometric approach to modeling microstructurally small fatigue crack formation: III. Development of a semi-empirical model for nucleation Modelling and Simulation in Materials Science and Engineering. 19. DOI: 10.1088/0965-0393/19/3/035008 |
0.341 |
|
| 2011 |
Choi SH, Kim DW, Seong BS, Rollett AD. 3-D simulation of spatial stress distribution in an AZ31 Mg alloy sheet under in-plane compression International Journal of Plasticity. 27: 1702-1720. DOI: 10.1016/J.Ijplas.2011.05.014 |
0.451 |
|
| 2011 |
Lee SB, Lebensohn RA, Rollett AD. Modeling the viscoplastic micromechanical response of two-phase materials using Fast Fourier Transforms International Journal of Plasticity. 27: 707-727. DOI: 10.1016/J.Ijplas.2010.09.002 |
0.593 |
|
| 2011 |
Kim DH, Kim SJ, Kim SH, Rollett AD, Oh KH, Han HN. Microtexture development during equibiaxial tensile deformation in monolithic and dual phase steels Acta Materialia. 59: 5462-5471. DOI: 10.1016/J.Actamat.2011.05.020 |
0.442 |
|
| 2011 |
Holm EA, Rohrer GS, Foiles SM, Rollett AD, Miller HM, Olmsted DL. Validating computed grain boundary energies in fcc metals using the grain boundary character distribution Acta Materialia. 59: 5250-5256. DOI: 10.1016/J.Actamat.2011.05.001 |
0.454 |
|
| 2011 |
Wang S, Holm EA, Suni J, Alvi MH, Kalu PN, Rollett AD. Modeling the recrystallized grain size in single phase materials Acta Materialia. 59: 3872-3882. DOI: 10.1016/J.Actamat.2011.03.011 |
0.816 |
|
| 2011 |
Uchic MD, Groeber MA, Rollett AD. Automated serial sectioning methods for rapid collection of 3-D microstructure data Jom. 63: 25-29. DOI: 10.1007/S11837-011-0041-2 |
0.321 |
|
| 2011 |
Lebensohn RA, Rollett AD, Suquet P. Fast fourier transform-based modeling for the determination of micromechanical fields in polycrystals Jom. 63: 13-18. DOI: 10.1007/S11837-011-0037-Y |
0.319 |
|
| 2011 |
Puri S, Acharya A, Rollett AD. Controlling plastic flow across grain boundaries in a continuum model Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 669-675. DOI: 10.1007/S11661-010-0257-8 |
0.476 |
|
| 2011 |
Khorashadizadeh A, Raabe D, Zaefferer S, Rohrer GS, Rollett AD, Winning M. Five-parameter grain boundary analysis by 3D EBSD of an ultra fine grained CuZr alloy processed by equal channel angular pressing Advanced Engineering Materials. 13: 237-244. DOI: 10.1002/Adem.201000259 |
0.445 |
|
| 2010 |
Taheri ML, Sebastian JT, Reed BW, Seidman DN, Rollett AD. Site-specific atomic scale analysis of solute segregation to a coincidence site lattice grain boundary. Ultramicroscopy. 110: 278-84. PMID 20097006 DOI: 10.1016/J.Ultramic.2009.11.006 |
0.636 |
|
| 2010 |
Rohrer GS, Li J, Lee S, Rollett AD, Groeber M, Uchic MD. Deriving grain boundary character distributions and relative grain boundary energies from three-dimensional EBSD data Materials Science and Technology. 26: 661-669. DOI: 10.1179/026708309X12468927349370 |
0.475 |
|
| 2010 |
Bozzolo N, Chan L, Rollett AD. Misorientations induced by deformation twinning in titanium Journal of Applied Crystallography. 43: 596-602. DOI: 10.1107/S0021889810008228 |
0.378 |
|
| 2010 |
Rollett AD, Lebensohn RA, Groeber M, Choi Y, Li J, Rohrer GS. Stress hot spots in viscoplastic deformation of polycrystals Modelling and Simulation in Materials Science and Engineering. 18. DOI: 10.1088/0965-0393/18/7/074005 |
0.442 |
|
| 2010 |
Winning M, Rollett AD, Gottstein G, Srolovitz DJ, Lim A, Shvindlerman LS. Mobility of low-angle grain boundaries in pure metals Philosophical Magazine. 90: 3107-3128. DOI: 10.1080/14786435.2010.481272 |
0.409 |
|
| 2010 |
Rohrer GS, Holm EA, Rollett AD, Foiles SM, Li J, Olmsted DL. Comparing calculated and measured grain boundary energies in nickel Acta Materialia. 58: 5063-5069. DOI: 10.1016/J.Actamat.2010.05.042 |
0.417 |
|
| 2010 |
Ko KJ, Rollett AD, Hwang NM. Abnormal grain growth of Goss grains in Fe-3% Si steel driven by sub-boundary-enhanced solid-state wetting: Analysis by Monte Carlo simulation Acta Materialia. 58: 4414-4423. DOI: 10.1016/J.Actamat.2010.04.038 |
0.501 |
|
| 2010 |
Gruber J, Rollett AD, Rohrer GS. Misorientation texture development during grain growth. Part II: Theory Acta Materialia. 58: 14-19. DOI: 10.1016/J.Actamat.2009.08.032 |
0.45 |
|
| 2010 |
Kraft RH, Batyrev I, Lee S, Rollett AD, Rice B. Multiscale modeling of armor ceramics Ceramic Engineering and Science Proceedings. 31: 143-158. |
0.526 |
|
| 2009 |
Hefferan CM, Li SF, Lind J, Lienert U, Rollett AD, Wynblatt P, Suter RM. Statistics of high purity nickel microstructure from high energy X-ray diffraction microscopy Computers, Materials and Continua. 14: 207-217. DOI: 10.3970/Cmc.2009.014.209 |
0.49 |
|
| 2009 |
Uyar F, Wilson SR, Gruber J, Lee S, Sintay S, Rollett AD, Srolovitz DJ. Testing a curvature driven moving finite element grain growth model with the generalized three dimensional von Neumann relation International Journal of Materials Research. 100: 543-549. DOI: 10.3139/146.110075 |
0.82 |
|
| 2009 |
Brahme A, Fridy J, Weiland H, Rollett AD. Modeling texture evolution during recrystallization in aluminum Modelling and Simulation in Materials Science and Engineering. 17. DOI: 10.1088/0965-0393/17/1/015005 |
0.735 |
|
| 2009 |
Mishra SK, Pant P, Narasimhan K, Rollett AD, Samajdar I. On the widths of orientation gradient zones adjacent to grain boundaries Scripta Materialia. 61: 273-276. DOI: 10.1016/J.Scriptamat.2009.03.062 |
0.468 |
|
| 2009 |
Lim SCV, Rollett AD. Length scale effects on recrystallization and texture evolution in Cu layers of a roll-bonded Cu-Nb composite Materials Science and Engineering A. 520: 189-196. DOI: 10.1016/J.Msea.2009.05.020 |
0.359 |
|
| 2009 |
Wang L, Daniewicz SR, Horstemeyer MF, Sintay S, Rollett AD. Three-dimensional finite element analysis using crystal plasticity for a parameter study of microstructurally small fatigue crack growth in a AA7075 aluminum alloy International Journal of Fatigue. 31: 651-658. DOI: 10.1016/J.Ijfatigue.2008.03.027 |
0.787 |
|
| 2009 |
Wang L, Daniewicz SR, Horstemeyer MF, Sintay S, Rollett AD. Three-dimensional finite element analysis using crystal plasticity for a parameter study of fatigue crack incubation in a 7075 aluminum alloy International Journal of Fatigue. 31: 659-667. DOI: 10.1016/J.Ijfatigue.2008.03.022 |
0.794 |
|
| 2009 |
Gruber J, Miller HM, Hoffmann TD, Rohrer GS, Rollett AD. Misorientation texture development during grain growth. Part I: Simulation and experiment Acta Materialia. 57: 6102-6112. DOI: 10.1016/J.Actamat.2009.08.036 |
0.457 |
|
| 2009 |
Sintay SD, Groeber MA, Rollett AD. 3D reconstruction of digital microstructures Electron Backscatter Diffraction in Materials Science. 139-153. DOI: 10.1007/978-0-387-88136-2_10 |
0.762 |
|
| 2008 |
Bozek JE, Hochhalter JD, Veilleux MG, Liu M, Heber G, Sintay SD, Rollett AD, Littlewood DJ, Maniatty AM, Weiland H, Christ RJ, Payne J, Welsh G, Harlow DG, Wawrzynek PA, et al. A geometric approach to modeling microstructurally small fatigue crack formation: I. Probabilistic simulation of constituent particle cracking in AA 7075-T651 Modelling and Simulation in Materials Science and Engineering. 16. DOI: 10.1088/0965-0393/16/6/065007 |
0.776 |
|
| 2008 |
Rollett AD, Lee S, Rohrer GS. Microstructure-property relationships based on 3D images of polycrystals Microscopy and Microanalysis. 14: 904-905. DOI: 10.1017/S1431927608087485 |
0.584 |
|
| 2008 |
Dillon SJ, Lee S, Rollett AD, Rohrer GS. Measuring the five parameter grain boundary character distribution from three-dimensional orientation maps Microscopy and Microanalysis. 14: 978-979. DOI: 10.1017/S1431927608085139 |
0.657 |
|
| 2008 |
Lebensohn RA, Brenner R, Castelnau O, Rollett AD. Orientation image-based micromechanical modelling of subgrain texture evolution in polycrystalline copper Acta Materialia. 56: 3914-3926. DOI: 10.1016/J.Actamat.2008.04.016 |
0.478 |
|
| 2008 |
Alvi MH, Cheong SW, Suni JP, Weiland H, Rollett AD. Cube texture in hot-rolled aluminum alloy 1050 (AA1050)-nucleation and growth behavior Acta Materialia. 56: 3098-3108. DOI: 10.1016/J.Actamat.2008.02.037 |
0.83 |
|
| 2008 |
Gao MC, Doǧan ON, King P, Rollett AD, Widom M. The first-principles design of ductile refractory alloys Jom. 60: 61-65. DOI: 10.1007/S11837-008-0092-1 |
0.364 |
|
| 2008 |
Rohrer GS, Gruber J, Rollett AD. A model for the origin of anisotropic grain boundary character distributions in polycrystalline materials Ceramic Transactions. 201: 343-353. |
0.346 |
|
| 2008 |
Chan LH, Weiland H, Cheong S, Rohrer OS, Rollett AD. The correlation between grain boundary character and intergranular corrosion susceptibility of 2124 aluminum alloy Ceramic Transactions. 201: 261-267. |
0.353 |
|
| 2008 |
Wang S, Alvi MH, Rollett AD. Subgrain coarsening of hot-rolled AA5005 aluminum alloy: A comparison between EBSD observations and Monte Carlo Ceramic Transactions. 201: 569-576. |
0.804 |
|
| 2007 |
Kim H, Camata RP, Lee S, Rohrer GS, Rollett AD, Vohra YK. Crystallographic texture in pulsed laser deposited hydroxyapatite bioceramic coatings. Acta Materialia. 55: 131-139. PMID 18563207 DOI: 10.1016/J.Actamat.2006.08.008 |
0.587 |
|
| 2007 |
Lee SB, Rollett AD, Rohrer GS. Three-dimensional microstructure reconstruction using FIB-OIM Materials Science Forum. 558: 915-920. DOI: 10.4028/Www.Scientific.Net/Msf.558-559.915 |
0.4 |
|
| 2007 |
Bozzolo N, Sawina G, Gerspach F, Sztwiertnia K, Rollett AD, Wagner F. Grain boundary character evolution during grain growth in a Zr alloy Materials Science Forum. 558: 863-868. DOI: 10.4028/Www.Scientific.Net/Msf.558-559.863 |
0.506 |
|
| 2007 |
Wang S, Rollett AD. Abnormal subgrain growth by Monte Carlo simulation based on hot-rolled AA5005 aluminum alloy texture Materials Science Forum. 558: 377-382. DOI: 10.4028/Www.Scientific.Net/Msf.558-559.377 |
0.494 |
|
| 2007 |
Rollett AD, Brahme AP, Roberts CG. An overview of accomplishments and challenges in recrystallization and grain growth Materials Science Forum. 558: 33-42. DOI: 10.4028/Www.Scientific.Net/Msf.558-559.33 |
0.776 |
|
| 2007 |
Sawina G, Gerspach F, Bozzolo N, Sztwiertnia K, Rollett AD, Wagner F. Modeling the evolution of orientation distribution functions during grain growth of some Ti and Zr alloys Materials Science Forum. 558: 1163-1168. DOI: 10.4028/Www.Scientific.Net/Msf.558-559.1163 |
0.471 |
|
| 2007 |
Okuda K, Yoshida H, Nagataki Y, Tanakaand Y, Rollett AD. Preliminary simulation for competing behaviors between recrystallization and transformation in dual phase steels Materials Science Forum. 558: 1145-1150. DOI: 10.4028/Www.Scientific.Net/Msf.558-559.1145 |
0.305 |
|
| 2007 |
Lee SB, Rollett AD. Three dimensional Monte Carlo simulation of isotropic coarsening of particles in liquid phase Materials Science Forum. 558: 1115-1120. DOI: 10.4028/Www.Scientific.Net/Msf.558-559.1115 |
0.33 |
|
| 2007 |
Gao MC, Gruber J, Rollett AD, Kuprat AP. Computer simulations combining finite difference and finite element methods: Solute drag on migrating grain boundaries in three-dimension Materials Science Forum. 558: 1075-1080. DOI: 10.4028/Www.Scientific.Net/Msf.558-559.1075 |
0.45 |
|
| 2007 |
Brahme A, Fridy J, Rollett AD. Modeling recrystallization in aluminum using input from experimental observations Materials Science Forum. 558: 1057-1061. DOI: 10.4028/Www.Scientific.Net/Msf.558-559.1057 |
0.768 |
|
| 2007 |
Lim SCV, Rollett AD. Recrystallization texture of copper as a function of layer thickness in roll-bonded Cu-Nb composites Materials Science Forum. 550: 515-520. DOI: 10.4028/Www.Scientific.Net/Msf.550.515 |
0.323 |
|
| 2007 |
Cho JH, Rollett AD, Oh KH. The Microstructure Evolution of Copper and Gold Bonding Wires during Annealing Materials Science Forum. 550: 399-404. DOI: 10.4028/Www.Scientific.Net/Msf.550.399 |
0.456 |
|
| 2007 |
Rollett AD, Lee SB, Campman R, Rohrer GS. Three-dimensional characterization of microstructure by electron back-scatter diffraction Annual Review of Materials Research. 37: 627-658. DOI: 10.1146/Annurev.Matsci.37.052506.084401 |
0.583 |
|
| 2007 |
Bennett TA, Kalu PN, Rollett AD. On the character of host-island grain interfaces in Fe-1%Si alloy Scripta Materialia. 57: 41-44. DOI: 10.1016/J.Scriptamat.2007.03.018 |
0.743 |
|
| 2007 |
Roberts CG, Semiatin SL, Rollett AD. Particle-associated misorientation distribution in a nickel-base superalloy Scripta Materialia. 56: 899-902. DOI: 10.1016/J.Scriptamat.2007.01.034 |
0.454 |
|
| 2007 |
Francis AJ, Roberts CG, Cao Y, Rollett AD, Salvador PA. Monte Carlo simulations and experimental observations of templated grain growth in thin platinum films Acta Materialia. 55: 6159-6169. DOI: 10.1016/J.Actamat.2007.07.033 |
0.461 |
|
| 2007 |
Lee SB, Rickman JM, Rollett AD. Three-dimensional simulation of isotropic coarsening in liquid phase sintering I: A model Acta Materialia. 55: 615-626. DOI: 10.1016/J.Actamat.2006.08.054 |
0.617 |
|
| 2006 |
Rollett AD, Campman R, Saylor D. Three dimensional microstructures: Statistical analysis of second phase particles in AA7075-T651 Materials Science Forum. 519: 1-10. DOI: 10.4028/Www.Scientific.Net/Msf.519-521.1 |
0.386 |
|
| 2006 |
Choi YS, Rollett AD, Piehler HR. Application of two-point orientation auto-correlation fucntion (TP-OACF) Materials Transactions. 47: 1313-1316. DOI: 10.2320/Matertrans.47.1313 |
0.32 |
|
| 2006 |
Kim H, Camata RP, Lee S, Rohrer GS, Rollett AD, Hennessy KM, Bellis SL, Vohra YK. Calcium phosphate bioceramics with tailored crystallographic texture for controlling cell adhesion Materials Research Society Symposium Proceedings. 925: 7-12. DOI: 10.1557/Proc-0925-Bb02-07 |
0.631 |
|
| 2006 |
Gao MC, Bennett TA, Rollett AD, Laughlin DE. The effects of applied magnetic fields on the α/γ phase boundary in the Fe-Si system Journal of Physics D: Applied Physics. 39: 2890-2896. DOI: 10.1088/0022-3727/39/14/003 |
0.636 |
|
| 2006 |
Brahme A, Alvi MH, Saylor D, Fridy J, Rollett AD. 3D reconstruction of microstructure in a commercial purity aluminum Scripta Materialia. 55: 75-80. DOI: 10.1016/J.Scriptamat.2006.02.017 |
0.804 |
|
| 2006 |
Kim CS, Rollett AD, Rohrer GS. Grain boundary planes: New dimensions in the grain boundary character distribution Scripta Materialia. 54: 1005-1009. DOI: 10.1016/J.Scriptamat.2005.11.071 |
0.486 |
|
| 2006 |
Barmak K, Kim J, Kim CS, Archibald WE, Rohrer GS, Rollett AD, Kinderlehrer D, Ta'Asan S, Zhang H, Srolovitz DJ. Grain boundary energy and grain growth in Al films: Comparison of experiments and simulations Scripta Materialia. 54: 1059-1063. DOI: 10.1016/J.Scriptamat.2005.11.060 |
0.419 |
|
| 2006 |
Cho JH, Rollett AD, Cho JS, Park YJ, Park SH, Oh KH. Investigation on cold-drawn gold bonding wire with serial and reverse-direction drawing Materials Science and Engineering A. 432: 202-215. DOI: 10.1016/J.Msea.2006.05.143 |
0.36 |
|
| 2006 |
Cho JH, Rollett AD, Cho JS, Park YJ, Moon JT, Oh KH. Investigation of recrystallization and grain growth of copper and gold bonding wires Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 3085-3097. DOI: 10.1007/S11661-006-0189-5 |
0.471 |
|
| 2006 |
Taheri M, Weiland H, Rollett A. A method of measuring stored energy macroscopically using statistically stored dislocations in commercial purity aluminum Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 19-25. DOI: 10.1007/S11661-006-0148-1 |
0.574 |
|
| 2005 |
Bennett TA, Jaramillo RA, Laughlin DE, Wilgen JB, Kisner R, Mackiewicz-Ludtka G, Ludtka GM, Kalu PN, Rollett AD. Texture evolution in Fe-1%Si as a function of high magnetic field Solid State Phenomena. 105: 151-156. DOI: 10.4028/Www.Scientific.Net/Ssp.105.151 |
0.642 |
|
| 2005 |
Barmak K, Archibald WE, Kim J, Kim CS, Rollett AD, Rohrer GS, Ta'asan S, Kinderlehrer D. Grain boundary energy and grain growth in highly-textured al films and foils: Experiment and simulation Materials Science Forum. 495: 1255-1260. DOI: 10.4028/Www.Scientific.Net/Msf.495-497.1255 |
0.466 |
|
| 2005 |
Rollett AD. Abnormal grain growth and texture development Materials Science Forum. 495: 1171-1176. DOI: 10.4028/Www.Scientific.Net/Msf.495-497.1171 |
0.484 |
|
| 2005 |
Taheri ML, Molodov D, Gottstein G, Rollett AD. Grain boundary mobility under a stored-energy driving force: A comparison to curvature-driven boundary migration Zeitschrift Fuer Metallkunde/Materials Research and Advanced Techniques. 96: 1166-1170. DOI: 10.3139/146.101157 |
0.638 |
|
| 2005 |
El-Dasher BS, Rollett AD. Defining electron backscatter diffraction resolution Microscopy and Microanalysis. 11: 54-55. DOI: 10.1017/S1431927605501582 |
0.633 |
|
| 2005 |
Gruber J, George DC, Kuprat AP, Rohrer GS, Rollett AD. Effect of anisotropic grain boundary properties on grain boundary plane distributions during grain growth Scripta Materialia. 53: 351-355. DOI: 10.1016/J.Scriptamat.2005.04.004 |
0.486 |
|
| 2005 |
Okuda K, Rollett AD. Monte Carlo simulation of elongated recrystallized grains in steels Computational Materials Science. 34: 264-273. DOI: 10.1016/J.Commatsci.2005.01.013 |
0.499 |
|
| 2005 |
Winning M, Rollett AD. Transition between low and high angle grain boundaries Acta Materialia. 53: 2901-2907. DOI: 10.1016/J.Actamat.2005.03.005 |
0.472 |
|
| 2005 |
Waryoba DR, Kalu PN, Rollett AD. The role of orientation pinning in statically recrystallized oxygen-free high-conductivity copper wire Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 205-215. DOI: 10.1007/S11661-005-0152-X |
0.498 |
|
| 2005 |
Cho JH, Rollett AD, Oh KH. Determination of a mean orientation in electron backscatter diffraction measurements Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 3427-3438. DOI: 10.1007/S11661-005-0016-4 |
0.37 |
|
| 2005 |
Brahme A, Saylor D, Campman R, Lee S, Fridy J, Rollett AD. 3D digital microstructures for prognosis modeling Materials Damage Prognosis - Proceedings of a Symposium of the Materials Science and Technology 2004 Conference. 81-85. |
0.661 |
|
| 2005 |
Roberts C, Semiatin SL, Rollett AD. A parametric study of grain growth during annealing of ingot macrostructures Materials Science and Technology. 3: 13-20. |
0.325 |
|
| 2005 |
Anagnostou E, Brahme A, Cornwell C, El-Dasher BS, Fridy J, Horstemeyer MF, Ingraffea AR, Lee SB, Maniatty A, Noack R, Papazian J, Rollett AD, Saylor D, Weiland H. Simulation of fatigue crack initiation and propagation in aluminum alloys using realistic microstructures 11th International Conference On Fracture 2005, Icf11. 2: 1104-1109. |
0.782 |
|
| 2004 |
Taheri ML, Rollett AD, Weiland H. In-situ quantification of solute effects on grain boundary mobility and character in aluminum alloys during recrystallization Materials Science Forum. 467: 997-1002. DOI: 10.4028/Www.Scientific.Net/Msf.467-470.997 |
0.646 |
|
| 2004 |
Miller HM, Saylor DM, El Dasher BS, Rollett AD, Rohrer GS. Crystallographic distribution of internal interfaces in spinel polycrystals Materials Science Forum. 467: 783-788. DOI: 10.4028/Www.Scientific.Net/Msf.467-470.783 |
0.44 |
|
| 2004 |
Gruber J, George DC, Kuprat AP, Rohrer GS, Rollett AD. Effect of anisotropic interfacial energy on grain boundary distributions during grain growth Materials Science Forum. 467: 733-738. DOI: 10.4028/Www.Scientific.Net/Msf.467-470.733 |
0.471 |
|
| 2004 |
Bennett TA, Kim CS, Rohrer GS, Rollett AD. Five-parameter grain boundary character distribution in Fe-1%Si Materials Science Forum. 467: 727-732. DOI: 10.4028/Www.Scientific.Net/Msf.467-470.727 |
0.723 |
|
| 2004 |
Rollett AD. Modeling the impact of grain boundary properties on microstructural evolution Materials Science Forum. 467: 707-714. DOI: 10.4028/Www.Scientific.Net/Msf.467-470.707 |
0.506 |
|
| 2004 |
Alvi MH, Cheong S, Weiland H, Rollett AD. Recrystallization and texture development in hot rolled 1050 aluminum Materials Science Forum. 467: 357-362. DOI: 10.4028/Www.Scientific.Net/Msf.467-470.357 |
0.825 |
|
| 2004 |
Shvindlerman LS, Gottstein G, Rollett AD. The Von Neumann-Mullins theory of grain growth - Valid or not?! Materials Science Forum. 467: 1111-1116. DOI: 10.4028/Www.Scientific.Net/Msf.467-470.1111 |
0.44 |
|
| 2004 |
Kinderlehrer D, Lee J, Livshits I, Rollett A, Ta'asan S. Mesoscale Simulation of Grain Growth Materials Science Forum. 1057-1062. DOI: 10.4028/Www.Scientific.Net/Msf.467-470.1057 |
0.441 |
|
| 2004 |
Rollett AD, Gottstein G, Shvindlerman LS, Molodov DA. Grain boundary mobility - A brief review Zeitschrift Fuer Metallkunde/Materials Research and Advanced Techniques. 95: 226-229. DOI: 10.3139/146.017938 |
0.435 |
|
| 2004 |
Rohrer GS, Saylor DM, El Dasher B, Adams BL, Rollett AD, Wynblatt P. The distribution of internal interfaces in polycrystals Zeitschrift Fuer Metallkunde/Materials Research and Advanced Techniques. 95: 197-214. DOI: 10.3139/146.017934 |
0.468 |
|
| 2004 |
Rohrer GS, El Dasher BS, Miller HM, Rollett AD, Saylor DM. Distribution of grain boundary planes at coincident site lattice misorientations Materials Research Society Symposium - Proceedings. 819: 265-275. DOI: 10.1557/Proc-819-N7.2 |
0.475 |
|
| 2004 |
Barmak K, Archibald WE, Rollett AD, Ta'asan S, Kinderlehrer D. Grain boundary properties and grain growth: Al foils, al films Materials Research Society Symposium - Proceedings. 819: 225-236. DOI: 10.1557/Proc-819-N6.6 |
0.415 |
|
| 2004 |
Taheri ML, Rollett AD, Weiland H. In-situ investigation of grain boundary mobility and character in aluminum alloys in the presence of a stored energy driving force Materials Research Society Symposium - Proceedings. 819: 219-224. DOI: 10.1557/Proc-819-N6.5 |
0.616 |
|
| 2004 |
Saylor DM, Dasher BE, Pang Y, Miller HM, Wynblatt P, Rollett AD, Rohrer GS. Habits of grains in dense polycrystalline solids Journal of the American Ceramic Society. 87: 724-726. DOI: 10.1111/J.1551-2916.2004.00724.X |
0.468 |
|
| 2004 |
Bacaltchuk CMB, Castello-Branco GA, Garmestani H, Rollett AD. Effect of magnetic field during secondary annealing on texture and microstructure of nonoriented silicon steel Materials and Manufacturing Processes. 19: 611-617. DOI: 10.1081/Amp-200028073 |
0.386 |
|
| 2004 |
Gottstein G, Rollett AD, Shvindlerman LS. On the validity of the von Neumann-Mullins relation Scripta Materialia. 51: 611-616. DOI: 10.1016/J.Scriptamat.2004.05.023 |
0.44 |
|
| 2004 |
Saylor DM, El Dasher BS, Rollett AD, Rohrer GS. Distribution of grain boundaries in aluminum as a function of five macroscopic parameters Acta Materialia. 52: 3649-3655. DOI: 10.1016/j.actamat.2004.04.018 |
0.319 |
|
| 2004 |
Rollett AD. Crystallographic texture change during grain growth Jom. 56: 63-68. DOI: 10.1007/S11837-004-0075-9 |
0.502 |
|
| 2004 |
Cho JH, Rollett AD, Oh KH. Determination of volume fractions of texture components with standard distributions in Euler space Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 1075-1086. DOI: 10.1007/S11661-004-1010-Y |
0.314 |
|
| 2004 |
Choi YS, Piehler HR, Rollett AD. Formation of mesoscale roughening in 6022-T4 Al sheets deformed in plane-strain tension Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 513-524. DOI: 10.1007/S11661-004-0362-7 |
0.427 |
|
| 2004 |
Saylor DM, Fridy J, El-Dasher BS, Jung KY, Rollett AD. Statistically representative three-dimensional microstructures based on orthogonal observation sections Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 35: 1969-1979. DOI: 10.1007/S11661-004-0146-0 |
0.759 |
|
| 2003 |
Demirel MC, Kuprat AP, George DC, Rollett AD. Bridging simulations and experiments in microstructure evolution. Physical Review Letters. 90: 016106. PMID 12570632 DOI: 10.1103/Physrevlett.90.016106 |
0.705 |
|
| 2003 |
Manohar PA, Lim K, Rollett AD, Lee Y. Simulation of microstructural evolution in rod rolling of a medium C-Mn steel Materials Science Forum. 426: 3789-3794. DOI: 10.4028/Www.Scientific.Net/Msf.426-432.3789 |
0.333 |
|
| 2003 |
Manohar PA, Lim K, Rollett AD, Lee Y. Computational exploration of microstructural evolution in a medium C-Mn steel and applications to rod mill Isij International. 43: 1421-1430. DOI: 10.2355/Isijinternational.43.1421 |
0.372 |
|
| 2003 |
Barmak K, Gungor A, Rollett AD, Cabral C, Harper JME. Texture of Cu and dilute binary Cu-alloy films: Impact of annealing and solute content Materials Science in Semiconductor Processing. 6: 175-184. DOI: 10.1016/S1369-8001(03)00062-3 |
0.335 |
|
| 2003 |
Bacaltchuk CMB, Castello-Branco GA, Ebrahimi M, Garmestani H, Rollett AD. Effect of magnetic field applied during secondary annealing on texture and grain size of silicon steel Scripta Materialia. 48: 1343-1347. DOI: 10.1016/S1359-6462(03)00015-0 |
0.353 |
|
| 2003 |
El-Dasher BS, Adams BL, Rollett AD. Viewpoint: Experimental recovery of geometrically necessary dislocation density in polycrystals Scripta Materialia. 48: 141-145. DOI: 10.1016/S1359-6462(02)00340-8 |
0.664 |
|
| 2003 |
Holm EA, Miodownik M, Rollett AD. On abnormal subgrain growth and the origin of recrystallization nuclei Acta Materialia. 51: 2701-2716. DOI: 10.1016/S1359-6454(03)00079-X |
0.424 |
|
| 2003 |
Cheong SW, Hilinski EJ, Rollett AD. Grain growth in a low-loss cold-rolled motor-lamination steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 1321-1327. DOI: 10.1007/S11661-003-0243-5 |
0.474 |
|
| 2003 |
Cheong SW, Hilinski EJ, Rollett AD. Effect of temper rolling on texture formation in a low loss cold-rolled magnetic lamination steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 34: 1311-1319. DOI: 10.1007/S11661-003-0242-6 |
0.318 |
|
| 2003 |
Cho J-, Kim YW, Oh KH, Cho J-, Moon J-, Lee J, Cho YW, Rollett AD. Recrystallization and grain growth of cold-drawn gold bonding wire Metallurgical and Materials Transactions A. 34: 1113-1125. DOI: 10.1007/S11661-003-0131-Z |
0.43 |
|
| 2003 |
El-Dasher BS, Adams BL, Rollett AD. Grain rotations during tensile deformation of columnar tantalum Materials Research Society Symposium - Proceedings. 779: 221-230. |
0.708 |
|
| 2003 |
Brahme A, Saylor DM, Fridy J, Rollett AD. Statistically representative three-dimensional microstructures for modeling microstructural evolution in aluminum Metallurgical Modeling For Aluminum Alloys - Proceedings From Materials Solutions Conference 2003: 1st International Symposium On Metallurgical Modeling For Aluminum Alloys. 163-168. |
0.706 |
|
| 2003 |
Alvi MH, Cheong S, Weiland H, Rollett AD. Microstructural evolution during recrystallization in hot rolled aluminum alloy 1050 Metallurgical Modeling For Aluminum Alloys - Proceedings From Materials Solutions Conference 2003: 1st International Symposium On Metallurgical Modeling For Aluminum Alloys. 191-197. |
0.807 |
|
| 2003 |
Manohar PA, Rollett AD. Asynchronous Parallel Potts Model for Simulation of Grain Growth Materials Science and Technology 2003 Meeting. 399-412. |
0.302 |
|
| 2003 |
Rollett AD, Alvi MH, Brahme AP, Weiland H. Recrystallization kinetics in hot rolled aluminum: A combined experimental and simulation approach Tms Annual Meeting. 269-278. |
0.771 |
|
| 2003 |
Alvi MH, El-Dasher BS, Rollett AD. Analysis of recrystallization kinectis from microstructural evolution and micro-hardness determination Tms Annual Meeting. 3-12. |
0.789 |
|
| 2002 |
Cho JH, Cho JS, Moon JT, Lee J, Cho YH, Rollett AD, Oh KH. Characterization of Cold Drawn Gold bonding Wire with EBSD Materials Science Forum. 499-504. DOI: 10.4028/Www.Scientific.Net/Msf.408-412.499 |
0.409 |
|
| 2002 |
Okuda K, Rollett AD. Monte Carlo Simulation for Abnormal Grain Growth during Nucleation Materials Science Forum. 413-418. DOI: 10.4028/Www.Scientific.Net/Msf.408-412.413 |
0.394 |
|
| 2002 |
Rollett AD. Texture Development Dependence on Grain Boundary Properties Materials Science Forum. 251-256. DOI: 10.4028/Www.Scientific.Net/Msf.408-412.251 |
0.462 |
|
| 2002 |
Gungor A, Barmak K, Rollett AD, Cabral C, Harper JME. Textures of Cu and Dilute Binary Cu(Ti) and Cu(In) Thin Films Materials Science Forum. 1567-1572. DOI: 10.4028/Www.Scientific.Net/Msf.408-412.1567 |
0.313 |
|
| 2002 |
Rollett AD. A New Representation of Grain Boundary Properties Materials Science Forum. 593-600. DOI: 10.4028/Www.Scientific.Net/Msf.396-402.593 |
0.432 |
|
| 2002 |
Demirel MC, Kuprat AP, George DC, Straub GK, Misra A, Alexander K, Rollett AD. Large scale statistics for computational verification of grain growth simulations with experiments Mrs Proceedings. 731: 195-202. DOI: 10.1557/Proc-731-W6.10 |
0.721 |
|
| 2002 |
Demirel MC, Kuprat AP, George DC, Straub GK, Rollett AD. Linking experimental characterization and computational modeling of grain growth in Al-foil Interface Science. 10: 137-141. DOI: 10.1023/A:1015867912262 |
0.725 |
|
| 2002 |
Lee PS, Piehler HR, Rollett AD, Adams BL. Texture clustering and long-range disorientation representation methods: application to 6022 aluminum sheet Metallurgical and Materials Transactions A. 33: 3709-3718. DOI: 10.1007/S11661-002-0243-X |
0.365 |
|
| 2001 |
Yang CC, Rollett AD, Mullins WW. Measuring relative grain boundary energies and mobilities in an aluminum foil from triple junction geometry Scripta Materialia. 44: 2735-2740. DOI: 10.1016/S1359-6462(01)00960-5 |
0.413 |
|
| 2001 |
Rollett AD, Raabe D. A hybrid model for mesoscopic simulation of recrystallization Computational Materials Science. 21: 69-78. DOI: 10.1016/S0927-0256(00)00216-0 |
0.41 |
|
| 2001 |
Rollett AD, Storch ML, Hilinski EJ, Goodman SR. Approach to saturation in textured soft magnetic materials Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 32: 2595-2603. DOI: 10.1007/S11661-001-0049-2 |
0.321 |
|
| 2000 |
Demirel MC, Kuprat AP, George DC, El-Dasher BS, Carlson NN, Straub GK, Rollett AD. Comparison of Experimental and Computational Aspects of Grain Growth in Al-Foil Mrs Proceedings. 652. DOI: 10.1557/Proc-652-Y1.8 |
0.821 |
|
| 2000 |
Kinderlehrer D, Livshits I, Manolache F, Rollett AD, Ta'asan S. An Approach to the Mesoscale Simulation of Grain Growth Mrs Proceedings. 652. DOI: 10.1557/Proc-652-Y1.5 |
0.399 |
|
| 2000 |
Takashima M, Rollett AD, Wynblatt P. A representation method for grain-boundary character Philosophical Magazine. 80: 2457-2465. DOI: 10.1080/01418610008216484 |
0.379 |
|
| 1999 |
Storch ML, Rollett AD, McHenry ME. The effect of mechanical working on the in-plane magnetic properties of Hiperco 50 Journal of Applied Physics. 85: 6040-6042. DOI: 10.1063/1.369075 |
0.313 |
|
| 1999 |
Adams B, Ta'Asan S, Kinderlehrer D, Livshits I, Mason D, Wu C, Mullins W, Rohrer G, Rollett A, Saylor D. Interface Science. 7: 321-337. DOI: 10.1023/A:1008733728830 |
0.471 |
|
| 1999 |
Rollett AD, Yang C-, Mullins WW, Adams BL, Wu CT, Bauer CL, Kinderlehrer D, Ta'asan S, Manolache F, Liu C, Livshits I, Mason D, Talukder A, Ozdemir S, Casasent D, et al. Extraction of Grain Boundary Energies from Triple Junction Geometry Microscopy and Microanalysis. 5: 230-231. DOI: 10.1017/S1431927600014471 |
0.402 |
|
| 1998 |
Doherty RD, Hughes DA, Humphreys FJ, Jonas JJ, Jensen DJ, Kassner ME, King WE, McNelley TR, McQueen HJ, Rollett AD. Current issues in recrystallization: A review Materials Today. 1: 14-15. DOI: 10.1016/S1369-7021(98)80046-1 |
0.485 |
|
| 1998 |
Lee PS, Piehler HR, Adams BL, Jarvis G, Hampel H, Rollett AD. Influence of surface texture on orange peel in aluminum Journal of Materials Processing Technology. 80: 315-319. DOI: 10.1016/S0924-0136(98)00189-7 |
0.407 |
|
| 1998 |
Rollett AD, Smith PR, James MR. Texture and anisotropy of Ti-22Al-23Nb foil Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 257: 77-86. DOI: 10.1016/S0921-5093(98)00825-9 |
0.353 |
|
| 1997 |
Rollett AD, Mullins WW. On the growth of abnormal grains Scripta Materialia. 36: 975-980. DOI: 10.1016/S1359-6462(96)00501-5 |
0.486 |
|
| 1997 |
Doherty RD, Hughes DA, Humphreys FJ, Jonas JJ, Jensen DJ, Kassner ME, King WE, McNelley TR, McQueen HJ, Rollett AD. Current issues in recrystallization: a review Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 238: 219-274. DOI: 10.1016/S0921-5093(97)00424-3 |
0.32 |
|
| 1995 |
Bolmaro RE, Browning RV, Guerra FM, Rollett AD. Finite element method simulations for two-phase material plastic strains Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 196: 53-63. DOI: 10.1016/0921-5093(94)09682-1 |
0.324 |
|
| 1994 |
Necker CT, Doherty RD, Rollett AD. Cube Texture Generation Dependence on Deformation Textures in Cold Rolled OFE Copper Materials Science Forum. 1021-1026. DOI: 10.4028/Www.Scientific.Net/Msf.157-162.1021 |
0.354 |
|
| 1994 |
Bolmaro RE, Browning RV, Guerra FM, Rollett AD. Texture development in AgNi powder composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 175: 113-124. DOI: 10.1016/0921-5093(94)91050-2 |
0.386 |
|
| 1994 |
Przystupa MA, Vasudévan AK, Rollett AD. Crystallographic texture gradients in the aluminum 8090 matrix alloy and 8090 particulate composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 186: 35-44. DOI: 10.1016/0921-5093(94)90303-4 |
0.417 |
|
| 1994 |
Wright SI, Gray GT, Rollett AD. Textural and microstructural gradient effects on the mechanical behavior of a tantalum plate Metallurgical and Materials Transactions A. 25: 1025-1031. DOI: 10.1007/Bf02652277 |
0.453 |
|
| 1993 |
Chen SP, Lesar RA, Rollett AD. Brittle Composites Modeling: Compazisons with MoSi 2 /ZrO 2 Mrs Proceedings. 322: 229. DOI: 10.1557/Proc-322-229 |
0.306 |
|
| 1993 |
Chen SP, LeSar R, Rollett AD. Modeling of transformation toughening in brittle composites Scripta Metallurgica Et Materiala. 28: 1393-1398. DOI: 10.1016/0956-716X(93)90488-E |
0.332 |
|
| 1993 |
Wright SI, Rollett AD, Stout MG. In-plane anisotropy of as-rolled copper sheet Scripta Metallurgica Et Materiala. 28: 985-990. DOI: 10.1016/0956-716X(93)90067-3 |
0.327 |
|
| 1993 |
Llanes L, Rollett AD, Laird C, Bassani JL. Effect of grain size and annealing texture on the cyclic response and the substructure evolution of polycrystalline copper Acta Metallurgica Et Materialia. 41: 2667-2679. DOI: 10.1016/0956-7151(93)90136-G |
0.466 |
|
| 1993 |
Llanes L, Rollett AD, Laird C. Effect of ramp-treatment on the cyclic stress-strain curve of “small grained” copper Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 167: 37-45. DOI: 10.1016/0921-5093(93)90334-B |
0.422 |
|
| 1992 |
Rollett AD, Luton MJ, Srolovitz DJ. Microstructural simulation of dynamic recrystallization Acta Metallurgica Et Materialia. 40: 43-55. DOI: 10.1016/0956-7151(92)90198-N |
0.427 |
|
| 1992 |
Rollett AD, Srolovitz DJ, Anderson MP, Doherty RD. Computer simulation of recrystallization-III. Influence of a dispersion of fine particles Acta Metallurgica Et Materialia. 40: 3475-3495. DOI: 10.1016/0956-7151(92)90062-J |
0.616 |
|
| 1992 |
LeSar R, Rollett AD, Srolovitz DJ. Modeling of transformation toughening in brittle materials Materials Science and Engineering A. 155: 267-274. DOI: 10.1016/0921-5093(92)90333-V |
0.373 |
|
| 1991 |
Necker CT, Doherty RD, Rollett AD. Quantitative Measurement of the Development of Recrystallization Texture in OFE Copper Textures and Microstructures. 14: 635-640. DOI: 10.1155/Tsm.14-18.635 |
0.557 |
|
| 1991 |
Rollett AD, Wenk H, Heidelbach F, Schofield TG, Muenschausen RE, Raistrick ID, Arendt PN, Korzekwa DA, Bennett K, Kallend JS. Texture-Property Relationships in the High Temperature Superconductors Textures and Microstructures. 14: 355-362. DOI: 10.1155/Tsm.14-18.355 |
0.301 |
|
| 1991 |
Kamat SV, Rollett AD, Hirth JP. Plastic deformation in Al-alloy matrix-alumina particulate composites Scripta Metallurgica Et Materialia. 25: 27-32. DOI: 10.1016/0956-716X(91)90348-5 |
0.36 |
|
| 1990 |
Grest G, Anderson M, Srolovitz D, Rollett A. Abnormal grain growth in three dimensions Scripta Metallurgica Et Materialia. 24: 661-665. DOI: 10.1016/0956-716X(90)90219-7 |
0.467 |
|
| 1990 |
Stout MG, Rollett AD. Large-Strain Bauschinger Effects in Fcc Metals and Alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 21: 3201-3213. DOI: 10.1007/Bf02647315 |
0.368 |
|
| 1989 |
Rollett AD, Srolovitz DJ, Doherty RD, Anderson MP. Computer simulation of recrystallization in non-uniformly deformed metals Acta Metallurgica. 37: 627-639. DOI: 10.1016/0001-6160(89)90247-2 |
0.598 |
|
| 1989 |
Rollett AD, Srolovitz DJ, Anderson MP. Simulation and theory of abnormal grain growth-anisotropic grain boundary energies and mobilities Acta Metallurgica. 37: 1227-1240. DOI: 10.1016/0001-6160(89)90117-X |
0.487 |
|
| 1987 |
Doherty R, Srolovitz D, Rollett A, Anderson M. On the volume fraction dependence of particle limited grain growth Scripta Metallurgica. 21: 675-679. DOI: 10.1016/0036-9748(87)90383-8 |
0.616 |
|
| Show low-probability matches. |
