| Year |
Citation |
Score |
| 2018 |
Corbani S, Castro J, Miranda A, Martha L, Carter B, Ingraffea A. Crack shape evolution under bending-induced partial closure Engineering Fracture Mechanics. 188: 493-508. DOI: 10.1016/J.Engfracmech.2017.10.002 |
0.532 |
|
| 2016 |
Spear AD, Hochhalter JD, Cerrone AR, Li SF, Lind JF, Suter RM, Ingraffea AR. A method to generate conformal finite-element meshes from 3D measurements of microstructurally small fatigue-crack propagation Fatigue and Fracture of Engineering Materials and Structures. 39: 737-751. DOI: 10.1111/Ffe.12449 |
0.775 |
|
| 2016 |
Davis BR, Wawrzynek PA, Carter BJ, Ingraffea AR. 3-D simulation of arbitrary crack growth using an energy-based formulation - Part II: Non-planar growth Engineering Fracture Mechanics. 154: 111-127. DOI: 10.1016/J.Engfracmech.2015.12.033 |
0.508 |
|
| 2016 |
García IG, Carter BJ, Ingraffea AR, Mantič V. A numerical study of transverse cracking in cross-ply laminates by 3D finite fracture mechanics Composites Part B: Engineering. 95: 475-487. DOI: 10.1016/J.Compositesb.2016.03.023 |
0.551 |
|
| 2016 |
Boyce BL, Kramer SLB, Bosiljevac TR, Corona E, Moore JA, Elkhodary K, Simha CHM, Williams BW, Cerrone AR, Nonn A, Hochhalter JD, Bomarito GF, Warner JE, Carter BJ, Warner DH, ... Ingraffea AR, et al. The second Sandia Fracture Challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading International Journal of Fracture. 198: 5-100. DOI: 10.1007/S10704-016-0089-7 |
0.795 |
|
| 2016 |
Cerrone AR, Nonn A, Hochhalter JD, Bomarito GF, Warner JE, Carter BJ, Warner DH, Ingraffea AR. Predicting failure of the Second Sandia Fracture Challenge geometry with a real-world, time constrained, over-the-counter methodology International Journal of Fracture. 1-10. DOI: 10.1007/S10704-016-0086-X |
0.765 |
|
| 2016 |
Freitas MO, Wawrzynek PA, Cavalcante-Neto JB, Vidal CA, Carter BJ, Martha LF, Ingraffea AR. Parallel generation of meshes with cracks using binary spatial decomposition Engineering With Computers. 1-20. DOI: 10.1007/S00366-016-0444-3 |
0.472 |
|
| 2015 |
Brock GR, Chen JT, Ingraffea AR, MacLeay J, Pluhar GE, Boskey AL, van der Meulen MC. The Effect of Osteoporosis Treatments on Fatigue Properties of Cortical Bone Tissue. Bone Reports. 2: 8-13. PMID 25642445 DOI: 10.1016/J.Bonr.2014.10.004 |
0.345 |
|
| 2015 |
Cerrone A, Stein C, Pokharel R, Hefferan C, Lind J, Tucker H, Suter R, Rollett A, Ingraffea A. Implementation and verification of a microstructure-based capability for modeling microcrack nucleation in LSHR at room temperature Modelling and Simulation in Materials Science and Engineering. 23. DOI: 10.1088/0965-0393/23/3/035006 |
0.38 |
|
| 2015 |
Tucker JC, Cerrone AR, Ingraffea AR, Rollett AD. Crystal plasticity finite element analysis for René88DT statistical volume element generation Modelling and Simulation in Materials Science and Engineering. 23. DOI: 10.1088/0965-0393/23/3/035003 |
0.426 |
|
| 2015 |
Oneida EK, van der Meulen MCH, Ingraffea AR. Method for calculating G, G<inf>I</inf>, and G<inf>II</inf> to simulate crack growth in 2D, multiple-material structures Engineering Fracture Mechanics. 140: 106-126. DOI: 10.1016/J.Engfracmech.2015.03.033 |
0.526 |
|
| 2015 |
Davis BR, Wawrzynek PA, Ingraffea AR. Simulation of Arbitrary Mixed-Mode Crack Growth Using an Energy-Based Approach Conference Proceedings of the Society For Experimental Mechanics Series. 66: 1-9. DOI: 10.1007/978-3-319-06977-7_1 |
0.423 |
|
| 2014 |
Jackson MD, Landis EN, Brune PF, Vitti M, Chen H, Li Q, Kunz M, Wenk HR, Monteiro PJ, Ingraffea AR. Mechanical resilience and cementitious processes in Imperial Roman architectural mortar. Proceedings of the National Academy of Sciences of the United States of America. 111: 18484-9. PMID 25512521 DOI: 10.1073/Pnas.1417456111 |
0.389 |
|
| 2014 |
Cerrone A, Hochhalter J, Heber G, Ingraffea A. On the Effects of Modeling As-Manufactured Geometry: Toward Digital Twin International Journal of Aerospace Engineering. 2014: 1-10. DOI: 10.1155/2014/439278 |
0.779 |
|
| 2014 |
Corbani S, Martha LF, de Castro JT, Carter B, Ingraffea A. Crack Front Shapes and Stress Intensity Factors in Plates under a Pure Bending Loading that Induces Partial Closure of the Crack Faces Procedia Materials Science. 3: 1279-1284. DOI: 10.1016/J.Mspro.2014.06.207 |
0.529 |
|
| 2014 |
Davis BR, Wawrzynek PA, Hwang CG, Ingraffea AR. Decomposition of 3-D mixed-mode energy release rates using the virtual crack extension method Engineering Fracture Mechanics. 131: 382-405. DOI: 10.1016/J.Engfracmech.2014.08.014 |
0.391 |
|
| 2014 |
Cerrone A, Wawrzynek P, Nonn A, Paulino GH, Ingraffea A. Implementation and verification of the Park–Paulino–Roesler cohesive zone model in 3D Engineering Fracture Mechanics. 120: 26-42. DOI: 10.1016/J.Engfracmech.2014.03.010 |
0.453 |
|
| 2014 |
Davis BR, Wawrzynek PA, Ingraffea AR. 3-D simulation of arbitrary crack growth using an energy-based formulation - Part I: Planar growth Engineering Fracture Mechanics. 115: 204-220. DOI: 10.1016/j.engfracmech.2013.11.005 |
0.424 |
|
| 2014 |
Stein CA, Cerrone A, Ozturk T, Lee S, Kenesei P, Tucker H, Pokharel R, Lind J, Hefferan C, Suter RM, Ingraffea AR, Rollett AD. Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy Current Opinion in Solid State and Materials Science. 18: 244-252. DOI: 10.1016/J.Cossms.2014.06.001 |
0.541 |
|
| 2014 |
Spear AD, Li SF, Lind JF, Suter RM, Ingraffea AR. Three-dimensional characterization of microstructurally small fatigue-crack evolution using quantitative fractography combined with post-mortem X-ray tomography and high-energy X-ray diffraction microscopy Acta Materialia. 76: 413-424. DOI: 10.1016/J.Actamat.2014.05.021 |
0.468 |
|
| 2014 |
Boyce BL, Kramer SLB, Fang HE, Cordova TE, Neilsen MK, Dion K, Kaczmarowski AK, Karasz E, Xue L, Gross AJ, Ghahremaninezhad A, Ravi-Chandar K, Lin SP, Chi SW, Chen JS, ... ... Ingraffea AR, et al. The sandia fracture challenge: Blind round robin predictions of ductile tearing International Journal of Fracture. 186: 5-68. DOI: 10.1007/S10704-013-9904-6 |
0.791 |
|
| 2013 |
Brock GR, Kim G, Ingraffea AR, Andrews JC, Pianetta P, van der Meulen MC. Nanoscale examination of microdamage in sheep cortical bone using synchrotron radiation transmission x-ray microscopy. Plos One. 8: e57942. PMID 23472121 DOI: 10.1371/Journal.Pone.0057942 |
0.327 |
|
| 2013 |
Brune PF, Ingraffea AR, Jackson MD, Perucchio R. The fracture toughness of an Imperial Roman mortar Engineering Fracture Mechanics. 102: 65-76. DOI: 10.1016/J.Engfracmech.2013.02.007 |
0.392 |
|
| 2013 |
Spear AD, Ingraffea AR. Effect of chemical milling on low-cycle fatigue behavior of an Al-Mg-Si alloy Corrosion Science. 68: 144-153. DOI: 10.1016/J.Corsci.2012.11.006 |
0.483 |
|
| 2013 |
Freitas MO, Wawrzynek PA, Cavalcante-Neto JB, Vidal CA, Martha LF, Ingraffea AR. A distributed-memory parallel technique for two-dimensional mesh generation for arbitrary domains Advances in Engineering Software. 59: 38-52. DOI: 10.1016/J.Advengsoft.2013.03.005 |
0.305 |
|
| 2013 |
Salvadori A, Wawrzynek PA, Ingraffea AR. Energy dissipation in the mixed mode growth of cracks at the interface between brittle materials International Journal of Fracture. 181: 257-271. DOI: 10.1007/S10704-013-9845-0 |
0.491 |
|
| 2013 |
Spear AD, Li SF, Cerrone AR, Lind J, Suter RM, Ingraffea AR. 3D microscale characterization and crystal-plastic Fe simulation of fatigue-crack nucleation and propagation in an aluminum alloy Materials Science and Technology Conference and Exhibition 2013, Ms and T 2013. 3: 1641-1648. |
0.444 |
|
| 2012 |
Carter BJ, Schenck EC, Wawrzynek PA, Ingraffea AR, Barlow KW. Three-dimensional simulation of fretting crack nucleation and growth Engineering Fracture Mechanics. 96: 447-460. DOI: 10.1016/J.Engfracmech.2012.08.015 |
0.544 |
|
| 2012 |
Davis BR, Wawrzynek PA, Ingraffea AR. Simulation of arbitrary delamination growth in composite structures using the virtual crack extension method 27th Annual Technical Conference of the American Society For Composites 2012, Held Jointly With 15th Joint Us-Japan Conference On Composite Materials and Astm-D30 Meeting. 387-405. |
0.344 |
|
| 2011 |
Spear AD, Priest AR, Veilleux MG, Ingraffea AR, Hochhalter JD. Surrogate modeling of high-fidelity fracture simulations for real-time residual-strength predictions Aiaa Journal. 49: 2770-2782. DOI: 10.2514/1.J051159 |
0.804 |
|
| 2011 |
Tuegel EJ, Ingraffea AR, Eason TG, Spottswood SM. Reengineering aircraft structural life prediction using a digital twin International Journal of Aerospace Engineering. DOI: 10.1155/2011/154798 |
0.339 |
|
| 2011 |
Coffman VR, Sethna JP, Ingraffea AR, Bozek JE, Bailey NP, Barker EI. Challenges in continuum modelling of intergranular fracture Strain. 47: 99-104. DOI: 10.1111/J.1475-1305.2010.00741.X |
0.412 |
|
| 2011 |
Hochhalter JD, Littlewood DJ, Veilleux MG, Bozek JE, Maniatty AM, Rollett AD, Ingraffea AR. A geometric approach to modeling microstructurally small fatigue crack formation: III. Development of a semi-empirical model for nucleation Modelling and Simulation in Materials Science and Engineering. 19. DOI: 10.1088/0965-0393/19/3/035008 |
0.82 |
|
| 2011 |
Spear A, Ingraffea A. Microstructurally small fatigue crack growth in thin, aluminum-alloy, pressure vessel liner Procedia Engineering. 10: 686-691. DOI: 10.1016/J.Proeng.2011.04.114 |
0.53 |
|
| 2011 |
Emery JM, Ingraffea AR. DDSim: Framework for multiscale structural prognosis Computational Methods For Microstructure-Property Relationships. 469-496. DOI: 10.1007/978-1-4419-0643-4_13 |
0.631 |
|
| 2010 |
Emery JM, Bozek JE, Ingraffea AR. Towards truly multiscale simulation of fatigue processes in metallic structures Asme International Mechanical Engineering Congress and Exposition, Proceedings. 11: 47-48. DOI: 10.1115/IMECE2009-12927 |
0.715 |
|
| 2010 |
Hochhalter JD, Littlewood DJ, Christ RJ, Veilleux MG, Bozek JE, Ingraffea AR, Maniatty AM. A geometric approach to modeling microstructurally small fatigue crack formation: II. Physically based modeling of microstructure-dependent slip localization and actuation of the crack nucleation mechanism in AA 7075-T651 Modelling and Simulation in Materials Science and Engineering. 18. DOI: 10.1088/0965-0393/18/4/045004 |
0.824 |
|
| 2009 |
Emery JM, Hochhalter JD, Wawrzynek PA, Heber G, Ingraffea AR. DDSim: A hierarchical, probabilistic, multiscale damage and durability simulation system - Part I: Methodology and Level I Engineering Fracture Mechanics. 76: 1500-1530. DOI: 10.1016/J.Engfracmech.2009.02.018 |
0.818 |
|
| 2009 |
Spear AD, Hochhalter JD, Ingraffea AR. Simulation of discrete-source damage propagation and residual strength of aircraft structures 12th International Conference On Fracture 2009, Icf-12. 6: 4652-4658. |
0.681 |
|
| 2009 |
Wawrzynek PA, Carter BJ, Ingraffea AR. Advances in simulation of arbitrary 3D crack growth using FRANC3D/NG 12th International Conference On Fracture 2009, Icf-12. 1: 344-354. |
0.449 |
|
| 2009 |
Hochhalter JD, Glaessgen EH, Ingraffea AR, Aquino WA. A method for combining experimentation and molecular dynamics simulation to improve cohesive zone models for metallic microstructures 12th International Conference On Fracture 2009, Icf-12. 6: 4590-4598. |
0.766 |
|
| 2009 |
Oneida EK, Van Der Meulen MCH, Ingraffea AR. Relationships among microstructural features and crack propagation in osteonal bone identified using finite element analysis 12th International Conference On Fracture 2009, Icf-12. 6: 4554-4563. |
0.429 |
|
| 2009 |
Veilleux MG, Hochhalter JD, Bozek JE, Wawrzynek PA, Ingraffea AR. A geometric approach to stochastically modeling fatigue crack propagation at the microstructural length scale 12th International Conference On Fracture 2009, Icf-12. 6: 4757-4766. |
0.827 |
|
| 2009 |
Bozek JE, Veilleux MG, Hochhalter JD, Wawrzynek PA, Ingraffea AR. Stochastic framework for predicting microstructurally small fatigue life of AA 7075-T651 12th International Conference On Fracture 2009, Icf-12. 6: 4624-4633. |
0.775 |
|
| 2008 |
Coffman VR, Sethna JP, Heber G, Liu M, Ingraffea A, Bailey NP, Barker EI. A comparison of finite element and atomistic modelling of fracture Modelling and Simulation in Materials Science and Engineering. 16. DOI: 10.1088/0965-0393/16/6/065008 |
0.445 |
|
| 2008 |
Bozek JE, Hochhalter JD, Veilleux MG, Liu M, Heber G, Sintay SD, Rollett AD, Littlewood DJ, Maniatty AM, Weiland H, Christ RJ, Payne J, Welsh G, Harlow DG, Wawrzynek PA, ... Ingraffea AR, et al. A geometric approach to modeling microstructurally small fatigue crack formation: I. Probabilistic simulation of constituent particle cracking in AA 7075-T651 Modelling and Simulation in Materials Science and Engineering. 16. DOI: 10.1088/0965-0393/16/6/065007 |
0.802 |
|
| 2007 |
Hwang CG, Ingraffea AR. Virtual crack extension method for calculating the second order derivatives of energy release rates for multiply cracked systems Engineering Fracture Mechanics. 74: 1468-1487. DOI: 10.1016/J.Engfracmech.2006.08.009 |
0.434 |
|
| 2007 |
Banks-Sills L, Wawrzynek PA, Carter B, Ingraffea AR, Hershkovitz I. Methods for calculating stress intensity factors in anisotropic materials: Part II-Arbitrary geometry Engineering Fracture Mechanics. 74: 1293-1307. DOI: 10.1016/J.Engfracmech.2006.07.005 |
0.483 |
|
| 2007 |
Emery JM, Hochhalther JD, Ingraffea AR. Computational fracture mechanics of concrete structures: A retrospective through multiple lenses Proceedings of the 6th International Conference On Fracture Mechanics of Concrete and Concrete Structures - Fracture Mechanics of Concrete and Concrete Structures. 1: 3-15. |
0.669 |
|
| 2005 |
Banks-Sills L, Hershkovitz I, Wawrzynek PA, Eliasi R, Ingraffea AR. Methods for calculating stress intensity factors in anisotropic materials: Part I - z = 0 is a symmetric plane Engineering Fracture Mechanics. 72: 2328-2358. DOI: 10.1016/J.Engfracmech.2004.12.007 |
0.419 |
|
| 2005 |
Hwang CG, Wawrzynek PA, Ingraffea AR. On the calculation of derivatives of stress intensity factors for multiple cracks Engineering Fracture Mechanics. 72: 1171-1196. DOI: 10.1016/J.Engfracmech.2004.08.005 |
0.478 |
|
| 2005 |
Ural A, Heber G, Wawrzynek PA, Ingraffea AR, Lewicki DG, Neto JBC. Three-dimensional, parallel, finite element simulation of fatigue crack growth in a spiral bevel pinion gear Engineering Fracture Mechanics. 72: 1148-1170. DOI: 10.1016/J.Engfracmech.2004.08.004 |
0.579 |
|
| 2005 |
Emery JM, Wawrzynek PA, Ingraffea AR. DDSim: A next generation damage and durability simulator 11th International Conference On Fracture 2005, Icf11. 4: 2534-2539. |
0.634 |
|
| 2005 |
Anagnostou E, Brahme A, Cornwell C, El-Dasher BS, Fridy J, Horstemeyer MF, Ingraffea AR, Lee SB, Maniatty A, Noack R, Papazian J, Rollett AD, Saylor D, Weiland H. Simulation of fatigue crack initiation and propagation in aluminum alloys using realistic microstructures 11th International Conference On Fracture 2005, Icf11. 2: 1104-1109. |
0.418 |
|
| 2004 |
Hwang CG, Ingraffea AR. Shape prediction and stability analysis of Mode-I planar cracks Engineering Fracture Mechanics. 71: 1751-1777. DOI: 10.1016/S0013-7944(03)00244-3 |
0.52 |
|
| 2004 |
Hanson JH, Bittencourt TN, Ingraffea AR. Three-dimensional influence coefficient method for cohesive crack simulations Engineering Fracture Mechanics. 71: 2109-2124. DOI: 10.1016/J.Engfracmech.2003.12.008 |
0.481 |
|
| 2003 |
Emery JM, Miyazaki K, Ingraffea AR. A simplified evaluation of stress intensity factors for a small diameter pipe penetrating a thick plate American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 462: 89-97. DOI: 10.1115/PVP2003-2012 |
0.712 |
|
| 2003 |
Hanson JH, Ingraffea AR. Using numerical simulations to compare the fracture toughness values for concrete from the size-effect, two-parameter and fictitious crack models Engineering Fracture Mechanics. 70: 1015-1027. DOI: 10.1016/S0013-7944(02)00163-7 |
0.558 |
|
| 2003 |
Ural A, Zehnder AT, Ingraffea AR. Fracture mechanics approach to facesheet delamination in honeycomb: Measurement of energy release rate of the adhesive bond Engineering Fracture Mechanics. 70: 93-103. DOI: 10.1016/S0013-7944(02)00024-3 |
0.348 |
|
| 2003 |
Ural A, Wawrzynek PA, Ingraffea AR, Lewicki DG. Simulating fatigue crack growth in spiral bevel gears using computational fracture mechanics Proceedings of the Asme Design Engineering Technical Conference. 4: 195-199. DOI: 10.1016/S0013-7944(00)00089-8 |
0.589 |
|
| 2003 |
Iesulauro E, Ingraffea AR, Heber G, Wawrzynek PA. A multiscale modeling approach to crack initiation in metallic polycrystals 44th Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics, and Materials Conference. |
0.821 |
|
| 2002 |
Chen CS, Wawrzynek PA, Ingraffea AR. Prediction of residual strength and curvilinear crack growth in aircraft fuselages Aiaa Journal. 40: 1644-1652. DOI: 10.2514/2.1836 |
0.583 |
|
| 2002 |
Chen CS, Wawrzynek PA, Ingraffea AR. Residual strength prediction of aircraft fuselages using crack-tip opening angle criterion Aiaa Journal. 40: 566-575. DOI: 10.2514/2.1684 |
0.576 |
|
| 2002 |
Hanson JH, Ingraffea AR. Compression loading applied to round double beam fracture specimens. II: Derivation of geometry factor Journal of Testing and Evaluation. 30: 515-523. DOI: 10.1520/Jte12348J |
0.38 |
|
| 2002 |
Hanson JH, Ingraffea AR. Compression loading applied to round double beam fracture specimens. I: Application to materials with large characteristic lengths Journal of Testing and Evaluation. 30: 508-514. DOI: 10.1520/Jte12339J |
0.42 |
|
| 2002 |
Han TS, Ural A, Chen CS, Zehnder AT, Ingraffea AR, Billington SL. Delamination buckling and propagation analysis of honeycomb panels using a cohesive element approach International Journal of Fracture. 115: 101-123. DOI: 10.1023/A:1016333709040 |
0.431 |
|
| 2002 |
Iesulauro E, Ingraffea AR, Arwade S, Wawrzynek PA. Simulation of grain boundary decohesion and crack initiation in aluminum microstructure models Astm Special Technical Publication. 715-728. |
0.822 |
|
| 2002 |
Riddell WT, Ingraffea AR, Wawrzynek PA. Propagation of non-planar fatigue cracks: Experimental observations and numerical simulations Astm Special Technical Publication. 573-597. |
0.447 |
|
| 2001 |
Lewicki DG, Handschuh RF, Spievak LE, Wawrzynek PA, Ingraffea AR. Consideration of moving tooth load in gear crack propagation predictions Journal of Mechanical Design, Transactions of the Asme. 123: 118-124. DOI: 10.1115/1.1338118 |
0.543 |
|
| 2001 |
Chen CS, Krause R, Pettit RG, Banks-Sills L, Ingraffea AR. Numerical assessment of T-stress computation using a p-version finite element method International Journal of Fracture. 107: 177-199. DOI: 10.1023/A:1007689311129 |
0.733 |
|
| 2001 |
Pettit RG, Chen CS, Ingraffea AR, Hui CY. Process zone size effects on naturally curving cracks Engineering Fracture Mechanics. 68: 1181-1205. DOI: 10.1016/S0013-7944(01)00014-5 |
0.807 |
|
| 2001 |
Hwang CG, Wawrzynek PA, Ingraffea AR. On the virtual crack extension method for calculating the derivatives of energy release rates for a 3D planar crack of arbitrary shape under mode-I loading Engineering Fracture Mechanics. 68: 925-947. DOI: 10.1016/S0013-7944(01)00002-9 |
0.515 |
|
| 2001 |
Cavalcante Neto JB, Wawrzynek PA, Carvalho MTM, Martha LF, Ingraffea AR. An algorithm for three-dimensional mesh generation for arbitrary regions with cracks Engineering With Computers. 17: 75-91. DOI: 10.1007/Pl00007196 |
0.439 |
|
| 2000 |
Castell MA, Ingraffea AR, Irwin LH. Fatigue crack growth in pavements Journal of Transportation Engineering. 126: 283-290. DOI: 10.1061/(Asce)0733-947X(2000)126:4(283) |
0.517 |
|
| 2000 |
Chi WM, Deierlein GG, Ingraffea A. Fracture toughness demands in welded beam-column moment connections Journal of Structural Engineering New York, N.Y.. 126: 88-97. DOI: 10.1061/(Asce)0733-9445(2000)126:1(88) |
0.452 |
|
| 2000 |
Carter BJ, Wawrzynek PA, Ingraffea AR. Automated 3‐D crack growth simulation International Journal For Numerical Methods in Engineering. 47: 229-253. DOI: 10.1002/(Sici)1097-0207(20000110/30)47:1/3<229::Aid-Nme769>3.0.Co;2-2 |
0.539 |
|
| 2000 |
Carter BJ, Wawrzynek PA, Ingraffea AR. Automated 3-D crack growth simulation International Journal For Numerical Methods in Engineering. 47: 229-253. |
0.446 |
|
| 2000 |
Carter B, Chen CS, Chew LP, Chrisochoides N, Gao GR, Heber G, Ingraffea AR, Krause R, Myers C, Nave D, Pingali K, Stodghill P, Vavasis S, Wawrzynek PA. Parallel FEM simulation of crack propagation-challenges, status, and perspectives Lecture Notes in Computer Science (Including Subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). 1800: 443-449. |
0.44 |
|
| 1999 |
Myers CR, Arwade SR, Iesulauro E, Wawrzynek PA, Grigoriu M, Ingraffea AR, Dawson PR, Miller MP, Sethna JP. Digital material: a framework for multiscale modeling of defects in solids Materials Research Society Symposium - Proceedings. 538: 509-514. DOI: 10.1557/Proc-538-509 |
0.758 |
|
| 1999 |
Chi WM, Deierlein GG, Ingraffea AR. Finite-element fracture analyses of welded beam-column connections Astm Special Technical Publication. 439-455. DOI: 10.1520/Stp13419S |
0.451 |
|
| 1999 |
TerMaath SC, Ingraffea AR, Wawrzynek PA. Computational fracture mechanics approach for the analysis of facesheet-from-core disbond of honeycomb core sandwich panels Astm Special Technical Publication. 169-182. DOI: 10.1520/Stp13402S |
0.471 |
|
| 1999 |
Chen CS, Wawrzynek PA, Ingraffea AR. Elastic-plastic crack growth simulation and residual strength prediction of thin plates with single and multiple cracks Astm Special Technical Publication. 97-113. |
0.479 |
|
| 1998 |
Singh R, Carter BJ, Wawrzynek PA, Ingraffea AR. Universal crack closure integral for SIF estimation Engineering Fracture Mechanics. 60: 133-146. DOI: 10.1016/S0013-7944(98)00008-3 |
0.521 |
|
| 1998 |
Hwang CG, Wawrzynek PA, Tayebi AK, Ingraffea AR. On the virtual crack extension method for calculation of the rates of energy release rate Engineering Fracture Mechanics. 59: 521-542. DOI: 10.1016/S0013-7944(97)00103-3 |
0.483 |
|
| 1997 |
Riddell WT, Ingraffea AR, Wawrzynek PA. Experimental observations and numerical predictions of three-dimensional fatigue crack propagation Engineering Fracture Mechanics. 58: 293-310. DOI: 10.1016/S0013-7944(97)00122-7 |
0.542 |
|
| 1997 |
Chen CS, Wawrzynek PA, Ingraffea AR. A methodology for fatigue crack growth and residual strength prediction with applications to aircraft fuselages Computational Mechanics. 19: 527-532. DOI: 10.1007/S004660050204 |
0.554 |
|
| 1996 |
Bittencourt TN, Wawrzynek PA, Ingraffea AR, Sousa JL. Quasi-automatic simulation of crack propagation for 2D lefm problems Engineering Fracture Mechanics. 55: 321-334. DOI: 10.1016/0013-7944(95)00247-2 |
0.558 |
|
| 1995 |
Bittencourt TN, Ingraffea AR. Three-Dimensional Cohesive Crack Analysis of Short-Rod Specimens Astm Special Technical Publications. 46-60. DOI: 10.1520/Stp14584S |
0.553 |
|
| 1995 |
Zehnder AT, Ingraffea AR. Reinforcing Effect of Coverlayers on the Fatigue Life of Copper-Kapton Flex Cables Ieee Transactions On Components Packaging and Manufacturing Technology Part B. 18: 704-708. DOI: 10.1109/96.475278 |
0.51 |
|
| 1995 |
Potyondy DO, Wawrzynek PA, Ingraffea AR. An algorithm to generate quadrilateral or triangular element surface meshes in arbitrary domains with applications to crack propagation International Journal For Numerical Methods in Engineering. 38: 2677-2701. DOI: 10.1002/Nme.1620381603 |
0.46 |
|
| 1995 |
Potyondy DO, Wawrzynek PA, Ingraffea AR. Discrete crack growth analysis methodology for through cracks in pressurized fuselage structures International Journal For Numerical Methods in Engineering. 38: 1611-1633. DOI: 10.1002/Nme.1620381003 |
0.544 |
|
| 1995 |
Grigoriu M, Ingraffea AR. Probability-based approach for optimal inspection of structures Structures Congress - Proceedings. 1: 599-602. |
0.311 |
|
| 1994 |
Elbert KE, Wright TM, Rimnac CM, Klein RW, Ingraffea AR, Gunsallus K, Bartel DL. Fatigue crack propagation behavior of ultra high molecular weight polyethylene under mixed mode conditions. Journal of Biomedical Materials Research. 28: 181-7. PMID 8207029 DOI: 10.1002/Jbm.820280207 |
0.519 |
|
| 1994 |
GRAY L, POTYONDY D, LUTZ E, WAWRZYNEK P, MARTHA L, INGRAFFEA A. CRACK PROPAGATION MODELING Mathematical Models and Methods in Applied Sciences. 4: 179-202. DOI: 10.1142/S021820259400011X |
0.533 |
|
| 1993 |
J.L. S, Carter BJ, Ingraffea AR. Numerical simulation of 3D hydraulic fracture using Newtonian and power-law fluids International Journal of Rock Mechanics and Mining Sciences And. 30: 1265-1271. DOI: 10.1016/0148-9062(93)90106-N |
0.391 |
|
| 1993 |
Martha LF, Wawrzynek PA, Ingraffea AR. Arbitrary crack representation using solid modeling Engineering With Computers. 9: 63-82. DOI: 10.1007/Bf01199046 |
0.538 |
|
| 1992 |
Lutz E, Ingraffea AR, Gray LJ. Use of ‘simple solutions’ for boundary integral methods in elasticity and fracture analysis International Journal For Numerical Methods in Engineering. 35: 1737-1751. DOI: 10.1002/Nme.1620350902 |
0.505 |
|
| 1992 |
Martha LF, Gray LJ, Ingraffea AR. Three-dimensional fracture simulation with a single-domain, direct boundary element formulation International Journal For Numerical Methods in Engineering. 35: 1907-1921. |
0.428 |
|
| 1991 |
Mann KA, Bartel DL, Wright TM, Ingraffea AR. Mechanical characteristics of the stem-cement interface. Journal of Orthopaedic Research : Official Publication of the Orthopaedic Research Society. 9: 798-808. PMID 1919842 DOI: 10.1002/Jor.1100090605 |
0.318 |
|
| 1991 |
Gerstle WH, Ingraffea AR. Compliance and stress-intensity factor calibration of the CENRBB specimen using the boundary element method International Journal of Rock Mechanics and Mining Sciences And. 28: 85-92. DOI: 10.1016/0148-9062(91)93237-Z |
0.725 |
|
| 1991 |
Boone TJ, Ingraffea AR, Roegiers JC. Simulation of hydraulic fracture propagation in poroelastic rock with application to stress measurement techniques International Journal of Rock Mechanics and Mining Sciences And. 28: 1-14. DOI: 10.1016/0148-9062(91)93228-X |
0.408 |
|
| 1991 |
Swenson DV, Ingraffea AR. The collapse of the Schoharie Creek Bridge: a case study in concrete fracture mechanics International Journal of Fracture. 51: 73-92. DOI: 10.1007/978-94-011-3638-9_6 |
0.566 |
|
| 1991 |
Mukherjee YX, Xie Z, Ingraffea AR. Delamination buckling of laminated plates International Journal For Numerical Methods in Engineering. 32: 1321-1337. DOI: 10.1002/Nme.1620320610 |
0.321 |
|
| 1991 |
Stewart HE, O'Rourke TD, Ingraffea AR. Pipeline crossings of railroads and highways Proceedings of the American Gas Association, Operating Section. 443-468. |
0.544 |
|
| 1990 |
Heuze FE, Shaffer RJ, Ingraffea AR, Nilson RH. Propagation of fluid-driven fractures in jointed rock. Part 1-development and validation of methods of analysis International Journal of Rock Mechanics and Mining Sciences And. 27: 243-254. DOI: 10.1016/0148-9062(90)90527-9 |
0.467 |
|
| 1990 |
Ingraffea AR. Case studies of simulation of fracture in concrete dams Engineering Fracture Mechanics. 35: 553-564. DOI: 10.1016/0013-7944(90)90230-E |
0.552 |
|
| 1990 |
Grigoriu M, Saif MTA, El Borgi S, Ingraffea AR. Mixed mode fracture initiation and trajectory prediction under random stresses International Journal of Fracture. 45: 19-34. DOI: 10.1007/Bf00012607 |
0.526 |
|
| 1990 |
Gray LJ, Martha LF, Ingraffea AR. Hypersingular integrals in boundary element fracture analysis International Journal For Numerical Methods in Engineering. 29: 1135-1158. DOI: 10.1002/Nme.1620290603 |
0.454 |
|
| 1990 |
Boone TJ, Ingraffea AR. A numerical procedure for simulation of hydraulically-driven fracture propagation in poroelastic media International Journal For Numerical & Analytical Methods in Geomechanics. 14: 27-47. DOI: 10.1002/Nag.1610140103 |
0.403 |
|
| 1989 |
Boone TJ, Ingraffea AR, Roegiers J. Visualization of Hydraulically Driven Fracture Propagation in Poroelastic Media Using a Superworkstation Journal of Petroleum Technology. 41: 574-580. DOI: 10.2118/18593-Pa |
0.36 |
|
| 1989 |
Linsbauer HN, Ingraffea AR, Rossmanith HP, Wawrzynek PA. Simulation of cracking in large arch dam: Part ii Journal of Structural Engineering (United States). 115: 1616-1630. DOI: 10.1061/(ASCE)0733-9445(1989)115:7(1616) |
0.477 |
|
| 1989 |
Linsbauer HN, Ingraffea AR, Rossmanith HP, Wawrzynek PA. Simulation of crackingin large arch dam: part1 Journal of Structural Engineering (United States). 115: 1599-1615. DOI: 10.1061/(ASCE)0733-9445(1989)115:7(1599) |
0.481 |
|
| 1989 |
Wawrzynek PA, Ingraffea AR. An interactive approach to local remeshing around a propagating crack Finite Elements in Analysis and Design. 5: 87-96. DOI: 10.1016/0168-874X(89)90008-5 |
0.532 |
|
| 1989 |
Lamkin SJ, Wawrzynek PA, Ingraffea AR. Two-dimensional numerical simulation of interacting fractures in rock Fracture of Concrete and Rock. 121-131. |
0.467 |
|
| 1989 |
Sousa JL, Martha LF, Wawrzynek PA, Ingraffea AR. Simulation of non-planar crack propagation in three-dimensional structures in concrete and rock Fracture of Concrete and Rock. 254-264. |
0.468 |
|
| 1988 |
Swenson DV, Ingraffea AR. Using combined experiments and analysis to generate dynamic critical stress intensity data Astm Special Technical Publications. 405-426. DOI: 10.1520/Stp33086S |
0.504 |
|
| 1988 |
Gerstle WH, Ingraffea AR, Perucchio R. Three-dimensional fatigue crack propagation analysis using the boundary element method International Journal of Fatigue. 10: 187-192. DOI: 10.1016/0142-1123(88)90061-8 |
0.816 |
|
| 1988 |
Swenson DV, Ingraffea AR. Modeling mixed-mode dynamic crack propagation nsing finite elements: Theory and applications Computational Mechanics. 3: 381-397. DOI: 10.1007/Bf00301139 |
0.553 |
|
| 1988 |
Wawrzynek PA, Martha LF, Ingraffea AR. Computational environment for the simulation of fracture processes in three dimensions American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 91: 321-327. |
0.427 |
|
| 1988 |
Grigoriu M, El Borgi S, Saif M, Ingraffea AR. Probabilistic prediction of mixed mode fracture initiation and trajectory under random stresses . 61-64. |
0.417 |
|
| 1988 |
Franklin JA, Zongqi S, Atkinson BK, Meredith PG, Rummel F, Mueller W, Nishimatsu Y, Takahashi H, Costin LS, Ingraffea AR, Bobrov GF. SUGGESTED METHODS FOR DETERMINING THE FRACTURE TOUGHNESS OF ROCK International Journal of Rock Mechanics and Mining Sciences &Amp; Geomechanics Abstracts. 25: 71-96. |
0.396 |
|
| 1987 |
Wawrzynek PA, Ingraffea AR. Interactive finite element analysis of fracture processes: An integrated approach Theoretical and Applied Fracture Mechanics. 8: 137-150. DOI: 10.1016/0167-8442(87)90007-3 |
0.384 |
|
| 1987 |
Boone TJ, Wawrzynek PA, Ingraffea AR. Finite element modelling of fracture propagation in orthotropic materials Engineering Fracture Mechanics. 26: 185-201. DOI: 10.1016/0013-7944(87)90196-2 |
0.432 |
|
| 1987 |
Gerstle WH, Martha LF, Ingraffea AR. Finite and boundary element modeling of crack propagation in two and three dimensions Engineering With Computers. 2: 167-183. DOI: 10.1007/Bf01201264 |
0.811 |
|
| 1987 |
Wawrzynek PA, Ingraffea AR. An edge-based data structure for two-dimensional finite element analysis Engineering With Computers. 3: 13-20. DOI: 10.1007/Bf01198145 |
0.334 |
|
| 1987 |
O'Rourke TD, Ingraffea AR, Norman RS, Burnham KB. Evaluation of cased and uncased gas pipelines at railroads . |
0.544 |
|
| 1987 |
Ingraffea AR, Linsbauer HN, Rossmanith HP. COMPUTER SIMULATION OF CRACKING IN A LARGE ARCH DAM DOWNSTREAM SIDE CRACKING . 547-557. |
0.442 |
|
| 1987 |
Ingraffea AR, Mettam KI, Gerstle WH, Wawrzynek PA. ANALYTICAL AND EXPERIMENTAL INVESTIGATION INTO FATIGUE CRACKING IN WELDED CRANE RUNWAY GIRDERS . 201-223. |
0.423 |
|
| 1986 |
Carpinteri A, Ingraffea AR, Bazˇant ZP. Fracture Mechanics of Concrete: Material Characterization and Testing Journal of Applied Mechanics. 53: 477-477. DOI: 10.1115/1.3171793 |
0.498 |
|
| 1986 |
Abel JF, Ingraffea AR, McGuire W, Greenberg DP. Interactive color graphical postprocessing as a unifying influence in numerical analysis research Finite Elements in Analysis and Design. 2: 1-17. DOI: 10.1016/0168-874X(86)90006-5 |
0.318 |
|
| 1986 |
Boone TJ, Wawrzynek PA, Ingraffea AR. Simulation of the fracture process in rock with application to hydrofracturing International Journal of Rock Mechanics and Mining Sciences And. 23: 255-265. DOI: 10.1016/0148-9062(86)90971-X |
0.574 |
|
| 1986 |
Wawrzynek PA, Ingraffea AR. LOCAL AUTOMATIC REMESHING AROUND A PROPAGATING CRACK TIP USING INTERACTIVE COMPUTER GRAPHICS American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 101: 33-38. |
0.439 |
|
| 1985 |
Elices M, Llorca J, Ingraffea AR. Fractura del hormigón en régimen elástico y lineal un ejemplo: la presa de Fontana Informes De La ConstruccióN. 37: 19-33. DOI: 10.3989/Ic.1985.V37.I372.1854 |
0.559 |
|
| 1985 |
Ingraffea AR, Gerstle WH, Gergely P, Saouma V. Fracture mechanics of bondin reinforced concrete Journal of Structural Engineering (United States). 111: 1163-1164. DOI: 10.1061/(Asce)0733-9445(1985)111:5(1163) |
0.742 |
|
| 1985 |
Nelson PP, Ingraffea AR, O'Rourke TD. TBM performance prediction using rock fracture parameters International Journal of Rock Mechanics and Mining Sciences And. 22: 189-192. DOI: 10.1016/0148-9062(85)93234-6 |
0.618 |
|
| 1985 |
Perucchio R, Ingraffea AR. An integrated boundary element analysis system with interactive computer graphics for three-dimensional linear-elastic fracture mechanics Computers and Structures. 20: 157-171. DOI: 10.1016/0045-7949(85)90065-3 |
0.535 |
|
| 1985 |
Ingraffea AR, Wawrzynek PA. MODELLING OF THE FRACTURE PROCESS ZONE IN ROCK . 151-157. |
0.442 |
|
| 1985 |
Ingraffea AR, Saouma V. NUMERICAL MODELING OF DISCRETE CRACK PROPAGATION IN REINFORCED AND PLAIN CONCRETE Fract Mech of Concr, Struct Appl and Numer Calc. 171-225. |
0.465 |
|
| 1984 |
Shaffer RJ, Thorpe RK, Ingraffea AR, Heuze FE. NUMERICAL AND PHYSICAL STUDIES OF FLUID DRIVEN FRACTURE PROPAGATION IN JOINTED ROCK Proceedings - Symposium On Rock Mechanics. 117-126. DOI: 10.1016/0148-9062(85)90257-8 |
0.387 |
|
| 1984 |
Manu C, Ingraffea AR. Numerical evaluation of the growth rate material parameters in fatigue propagation of surface flaws Nuclear Engineering and Design. 77: 131-138. DOI: 10.1016/0029-5493(84)90173-0 |
0.476 |
|
| 1984 |
Ingraffea AR, Gerstle WH, Gergely P, Saouma V. Fracture mechanics of bond in reinforced concrete Computer-Aided Design. 16: 339. DOI: 10.1016/0010-4485(84)90128-3 |
0.733 |
|
| 1983 |
Han TY, Perucchio RS, Huang YP, Kulhawy FH, Ingraffea AR. Example cost of 3-D FEM for underground openings Journal of Geotechnical Engineering. 109: 1496-1499. DOI: 10.1061/(Asce)0733-9410(1983)109:11(1496) |
0.537 |
|
| 1983 |
Perucchio R, Ingraffea AR. Interactive computer graphic preprocessing for three-dimensional boundary-integral element analysis Computers and Structures. 16: 153-166. DOI: 10.1016/0045-7949(83)90157-8 |
0.306 |
|
| 1983 |
Ingraffea AR, Blandford GE, Liggett JA. AUTOMATIC MODELLING OF MIXED-MODE FATIGUE AND QUASI-STATIC CRACK PROPAGATION USING THE BOUNDARY ELEMENT METHOD Astm Special Technical Publication. 407-426. |
0.414 |
|
| 1982 |
Gerstle W, Ingraffea AR, Gergely P. FRACTURE MECHANICS OF BOND IN REINFORCED CONCRETE Proceedings of the U.S. National Congress of Applied Mechanics. 477-478. DOI: 10.1061/(Asce)0733-9445(1984)110:4(871) |
0.543 |
|
| 1982 |
Beech JF, Ingraffea AR. Three-dimensional finite element calibration of the short-rod specimen International Journal of Fracture. 18: 217-229. DOI: 10.1007/Bf00032275 |
0.487 |
|
| 1981 |
Blandford GE, Ingraffea AR, Liggett JA. Two-dimensional stress intensity factor computations using the boundary element method International Journal For Numerical Methods in Engineering. 17: 387-404. DOI: 10.1002/Nme.1620170308 |
0.796 |
|
| 1980 |
Ingraffea AR, Manu C. Stress-intensity factor computation in three dimensions with quarter-point elements International Journal For Numerical Methods in Engineering. 15: 1427-1445. DOI: 10.1002/Nme.1620151002 |
0.42 |
|
| 1980 |
Ingraffea AR, Heuze FE. Finite element models for rock fracture mechanics International Journal For Numerical and Analytical Methods in Geomechanics. 4: 25-43. DOI: 10.1002/Nag.1610040103 |
0.492 |
|
| 1979 |
Ingraffea AR. STRENGTH RATIO EFFECT IN THE FRACTURE OF ROCK STRUCTURES U.S. Symposium On Rock Mechanics. 153-162. |
0.428 |
|
| 1978 |
Lynn PP, Ingraffea AR. Transition elements to be used with quarter-point crack-tip elements International Journal For Numerical Methods in Engineering. 12: 1031-1036. DOI: 10.1002/Nme.1620120612 |
0.411 |
|
| 1977 |
Ingraffea AR. NODAL GRAFTING FOR CRACK PROPAGATION STUDIES International Journal For Numerical Methods in Engineering. 11: 1185-1197. |
0.381 |
|
| 1966 |
Boone TJ, Ingraffea AR, Swenson DV. Simulation of the fracture process at rock interfaces . |
0.308 |
|
| Show low-probability matches. |