Year |
Citation |
Score |
2022 |
Xing C, Etemadi R, Pillai KM, Wang Q, Wang B. Numerical Simulation on Thermal Stresses and Solidification Microstructure for Making Fiber-Reinforced Aluminum Matrix Composites. Materials (Basel, Switzerland). 15. PMID 35744225 DOI: 10.3390/ma15124166 |
0.316 |
|
2020 |
Xu Z, Pillai KM. A pore-network study on the factors influencing the isothermal drying of single- and dual-scale porous media Drying Technology. 1-20. DOI: 10.1080/07373937.2020.1742149 |
0.33 |
|
2019 |
Barari B, Beyhaghi S, Pillai K. Fast And Inexpensive 2D-Micrograph Based Method Of Permeability Estimation Through Micro-Macro Coupling In Porous Media Journal of Porous Media. 22: 831-849. DOI: 10.1615/Jpormedia.2019028855 |
0.305 |
|
2019 |
Kaffel A, Pillai K, Feldkamp J, Tower T. A new efficient mass-exchange closure for modeling unsaturated flows and mass-transport processes in thin porous media International Journal of Heat and Mass Transfer. 140: 1055-1073. DOI: 10.1016/J.Ijheatmasstransfer.2019.04.052 |
0.459 |
|
2019 |
Zarandi MAF, Arroyo S, Pillai KM. Longitudinal and transverse flows in fiber tows: Evaluation of theoretical permeability models through numerical predictions and experimental measurements Composites Part a-Applied Science and Manufacturing. 119: 73-87. DOI: 10.1016/J.Compositesa.2018.12.032 |
0.563 |
|
2019 |
Paul S, Roy S, Ghosh P, Zarandi MAF, Cender T, Pillai KM. A Novel Method for Permeability Estimation from Micro-tomographic Images Transport in Porous Media. 127: 171-190. DOI: 10.1007/S11242-018-1186-Z |
0.436 |
|
2018 |
Etemadi R, Wang B, Pillai KM, Niroumand B, Omrani E, Rohatgi P. Pressure infiltration processes to synthesize metal matrix composites – A review of metal matrix composites, the technology and process simulation Materials and Manufacturing Processes. 33: 1261-1290. DOI: 10.1080/10426914.2017.1328122 |
0.359 |
|
2018 |
Zarandi MAF, Pillai KM, Barari B. Flow along and across glass‐fiber wicks: Testing of permeability models through experiments and simulations Aiche Journal. 64: 3491-3501. DOI: 10.1002/Aic.16195 |
0.408 |
|
2018 |
Zarandi MAF, Pillai KM, Kimmel AS. Spontaneous imbibition of liquids in glass-fiber wicks. Part I: Usefulness of a sharp-front approach Aiche Journal. 64: 294-305. DOI: 10.1002/Aic.15965 |
0.544 |
|
2018 |
Zarandi MAF, Pillai KM. Spontaneous imbibition of liquid in glass fiber wicks, Part II: Validation of a diffuse‐front model Aiche Journal. 64: 306-315. DOI: 10.1002/Aic.15856 |
0.536 |
|
2016 |
Barari B, Omrani E, Dorri Moghadam A, Menezes PL, Pillai KM, Rohatgi PK. Mechanical, physical and tribological characterization of nano-cellulose fibers reinforced bio-epoxy composites: An attempt to fabricate and scale the 'Green' composite. Carbohydrate Polymers. 147: 282-93. PMID 27178934 DOI: 10.1016/J.Carbpol.2016.03.097 |
0.392 |
|
2016 |
Xu Z, Pillai KM. Analyzing slow drying in a porous medium placed adjacent to laminar airflow using a pore-network model Numerical Heat Transfer Part a-Applications. 70: 1213-1231. DOI: 10.1080/10407782.2016.1230432 |
0.413 |
|
2016 |
Barari B, Ellingham TK, Ghamhia II, Pillai KM, El-Hajjar R, Turng LS, Sabo R. Mechanical characterization of scalable cellulose nano-fiber based composites made using liquid composite molding process Composites Part B: Engineering. 84: 277-284. DOI: 10.1016/J.Compositesb.2015.08.040 |
0.422 |
|
2016 |
Beyhaghi S, Xu Z, Pillai KM. Achieving the Inside–Outside Coupling During Network Simulation of Isothermal Drying of a Porous Medium in a Turbulent Flow Transport in Porous Media. 114: 823-842. DOI: 10.1007/S11242-016-0746-3 |
0.388 |
|
2016 |
Barari B, Pillai KM. Calibration of one-dimensional flow setup used for estimating fabric permeability using three different reference media Polymer Composites. 37: 925-935. DOI: 10.1002/Pc.23251 |
0.46 |
|
2015 |
Omrani E, Barari B, Dorri Moghadam A, Rohatgi PK, Pillai KM. Mechanical and tribological properties of self-lubricating bio-based carbon-fabric epoxy composites made using liquid composite molding Tribology International. 92: 222-232. DOI: 10.1016/J.Triboint.2015.06.007 |
0.417 |
|
2015 |
Etemadi R, Pillai KM, Rohatgi PK, Hamidi SA. On Porosity Formation in Metal Matrix Composites Made with Dual-Scale Fiber Reinforcements Using Pressure Infiltration Process Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 2119-2133. DOI: 10.1007/S11661-015-2792-9 |
0.424 |
|
2015 |
Gunashekar S, Pillai KM, Church BC, Abu-Zahra NH. Liquid flow in polyurethane foams for filtration applications: a study on their characterization and permeability estimation Journal of Porous Materials. 22: 749-759. DOI: 10.1007/S10934-015-9948-2 |
0.476 |
|
2015 |
Barari B, Pillai KM. Search for a 'green' composite material: An attempt to fabricate cellulose nano-fiber composites using liquid composite molding Journal of the Indian Institute of Science. 95: 313-320. |
0.318 |
|
2014 |
Languri EM, Pillai KM. A combined experimental/numerical approach to study the thermal dispersion in porous media flows Thermal Science. 18: S463-S474. DOI: 10.2298/Tsci110626009L |
0.482 |
|
2014 |
Pillai KM. Single-phase flows in swelling, liquid-absorbing porous media: A derivation of flow governing equations using the volume averaging method with a nondeterministic, heuristic approach to assessing the effect of solid-phase changes Journal of Porous Media. 17: 915-935. DOI: 10.1615/Jpormedia.V17.I10.60 |
0.548 |
|
2014 |
Vernet N, Ruiz E, Advani S, Alms JB, Aubert M, Barburski M, Barari B, Beraud JM, Berg DC, Correia N, Danzi M, Delavière T, Dickert M, Di Fratta C, Endruweit A, ... ... Pillai K, et al. Experimental determination of the permeability of engineering textiles: Benchmark II Composites Part a: Applied Science and Manufacturing. 61: 172-184. DOI: 10.1016/J.Compositesa.2014.02.010 |
0.34 |
|
2014 |
Beyhaghi S, Geoffroy S, Prat M, Pillai KM. Wicking and evaporation of liquids in porous wicks: A simple analytical approach to optimization of wick design Aiche Journal. 60: 1930-1940. DOI: 10.1002/Aic.14353 |
0.441 |
|
2013 |
Reikher A, Pillai KM. A fast numerical simulation for modeling simultaneous metal flow and solidification in thin cavities using the lubrication approximation Numerical Heat Transfer; Part a: Applications. 63: 75-100. DOI: 10.1080/10407782.2012.724331 |
0.8 |
|
2013 |
Reikher A, Pillai KM. A fast simulation of transient metal flow and solidification in a narrow channel. Part II. Model validation and parametric study International Journal of Heat and Mass Transfer. DOI: 10.1016/J.Ijheatmasstransfer.2012.12.061 |
0.786 |
|
2013 |
Reikher A, Pillai KM. A fast simulation of transient metal flow and solidification in a narrow channel. Part I: Model development using lubrication approximation International Journal of Heat and Mass Transfer. DOI: 10.1016/J.Ijheatmasstransfer.2012.12.060 |
0.805 |
|
2013 |
Shaeri MR, Beyhaghi S, Pillai KM. On applying an external-flow driven mass transfer boundary condition to simulate drying from a pore-network model International Journal of Heat and Mass Transfer. 57: 331-344. DOI: 10.1016/J.Ijheatmasstransfer.2012.10.005 |
0.374 |
|
2013 |
Wang B, Pillai KM. Numerical simulation of pressure infiltration process for making metal matrix composites using dual-scale fabrics Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 5834-5852. DOI: 10.1007/S11661-013-1955-9 |
0.527 |
|
2012 |
Masoodi R, Pillai KM. A general formula for capillary suction-pressure in porous media Journal of Porous Media. 15: 775-783. DOI: 10.1615/Jpormedia.V15.I8.60 |
0.72 |
|
2012 |
Masoodi R, Pillai KM, Grahl N, Tan H. Numerical simulation of LCM mold-filling during the manufacture of natural fiber composites Journal of Reinforced Plastics and Composites. 31: 363-378. DOI: 10.1177/0731684412438629 |
0.818 |
|
2012 |
Masoodi R, Pillai KM. A study on moisture absorption and swelling in bio-based jute-epoxy composites Journal of Reinforced Plastics and Composites. 31: 285-294. DOI: 10.1177/0731684411434654 |
0.736 |
|
2012 |
Masoodi R, El-Hajjar RF, Pillai KM, Sabo R. Mechanical characterization of cellulose nanofiber and bio-based epoxy composite Materials and Design. 36: 570-576. DOI: 10.1016/J.Matdes.2011.11.042 |
0.713 |
|
2012 |
Shaeri MR, Beyhaghi S, Pillai KM. Drying of a porous medium with multiple open sides using a pore-network model simulation International Communications in Heat and Mass Transfer. 39: 1320-1324. DOI: 10.1016/J.Icheatmasstransfer.2012.07.022 |
0.302 |
|
2012 |
Tan H, Pillai KM. Multiscale modeling of unsaturated flow in dual-scale fiber preforms of liquid composite molding III: Reactive flows Composites Part a: Applied Science and Manufacturing. 43: 29-44. DOI: 10.1016/J.Compositesa.2011.08.008 |
0.597 |
|
2012 |
Tan H, Pillai KM. Multiscale modeling of unsaturated flow of dual-scale fiber preform in liquid composite molding II: Non-isothermal flows Composites Part a: Applied Science and Manufacturing. 43: 14-28. DOI: 10.1016/j.compositesa.2011.06.012 |
0.484 |
|
2012 |
Tan H, Pillai KM. Multiscale modeling of unsaturated flow in dual-scale fiber preforms of liquid composite molding I: Isothermal flows Composites Part a: Applied Science and Manufacturing. 43: 1-13. DOI: 10.1016/J.Compositesa.2011.06.012 |
0.582 |
|
2012 |
Masoodi R, Tan H, Pillai KM. Numerical simulation of liquid absorption in paper-like swelling porous media Aiche Journal. 58: 2536-2544. DOI: 10.1002/Aic.12759 |
0.766 |
|
2012 |
Wang B, Pillai KM. Numerical simulation of pressure infiltration process for making metal matrix composites: Effect of processing parameters Tms Annual Meeting. 1: 823-830. |
0.357 |
|
2011 |
Beyhaghi S, Pillai KM. Estimation of tortuosity and effective diffusivity tensors using closure formulation in a sintered polymer wick during transport of a nondilute, multicomponent liquid mixture Special Topics and Reviews in Porous Media. 2: 267-282. DOI: 10.1615/Specialtopicsrevporousmedia.V2.I4.20 |
0.351 |
|
2011 |
Languri EM, Pillai KM. Effect of aspect ratio on measured permeability and flow-front progress in 1D flow experimenty International Journal of Fluid Mechanics Research. 38: 551-564. DOI: 10.1615/Interjfluidmechres.V38.I6.80 |
0.586 |
|
2011 |
Beyhaghi S, Pillai KM, Qadah DT, Dietz ML. Evaporation and transport of non-dilute, multi-component liquid mixtures in porous wicks: Simulation and experimental validation International Journal of Heat and Mass Transfer. 54: 5216-5230. DOI: 10.1016/J.Ijheatmasstransfer.2011.08.022 |
0.489 |
|
2011 |
Masoodi R, Tan H, Pillai KM. Darcy's law-based numerical simulation for modeling 3D liquid absorption into porous wicks Aiche Journal. 57: 1132-1143. DOI: 10.1002/Aic.12343 |
0.774 |
|
2011 |
Masoodi R, Pillai KM. Modeling the Processing of Natural Fiber Composites Made Using Liquid Composite Molding Handbook of Bioplastics and Biocomposites Engineering Applications. 43-73. DOI: 10.1002/9781118203699.ch3 |
0.729 |
|
2011 |
Masoodi R, Hajjar RE, Pillai KM, Javadi A, Sabo R. An experimental study on crack propagation in green composites made from cellulose nanofibers and epoxy International Sampe Technical Conference. |
0.694 |
|
2011 |
Masoodi R, Javadi A, Pillai KM, Sabo R. An experimental study on swelling of cellulose nano-fiber films in epoxy resins and water International Sampe Technical Conference. |
0.713 |
|
2010 |
Tan H, Pillai KM. Processing polymer matrix composites for blast protection Blast Protection of Civil Infrastructures and Vehicles Using Composites. 54-87. DOI: 10.1533/9781845698034.1.54 |
0.347 |
|
2010 |
Masoodi R, Pillai KM, Varanasi PP. Effect of externally applied liquid pressure on wicking in paper wipes Journal of Engineered Fibers and Fabrics. 5: 49-66. DOI: 10.1177/155892501000500307 |
0.726 |
|
2010 |
Beyhaghi S, Pillai KM, Qadah DT, Dietz ML. Evaporation of a non-dilute, multi-component liquid mixture from a porous wick Aip Conference Proceedings. 1254: 149-154. DOI: 10.1063/1.3453801 |
0.364 |
|
2010 |
Tan H, Pillai KM. Numerical simulation of reactive flow in liquid composite molding using flux-corrected transport (FCT) based finite element/control volume (FE/CV) method International Journal of Heat and Mass Transfer. 53: 2256-2271. DOI: 10.1016/J.Ijheatmasstransfer.2009.12.003 |
0.466 |
|
2010 |
Tan H, Pillai KM. Fast liquid composite molding simulation of unsaturated flow in dual-scale fiber mats using the imbibition characteristics of a fabric-based unit cell Polymer Composites. 31: 1790-1807. DOI: 10.1002/Pc.20971 |
0.594 |
|
2010 |
Masoodi R, Pillai KM. Darcy's law-based model for wicking in paper-like swelling porous media Aiche Journal. 56: 2257-2267. DOI: 10.1002/Aic.12163 |
0.777 |
|
2010 |
Tan H, Pillai KM. Multiscale modeling of isothermal unsaturated flow in dual-scale fiber preforms of liquid composite molding International Sampe Symposium and Exhibition (Proceedings). |
0.525 |
|
2010 |
Vechart AP, Masoodi R, Pillai KM. Design and evaluation of an idealized porous medium for calibration of permeability measuring devices Advanced Composites Letters. 19: 35-49. |
0.719 |
|
2009 |
Pillai KM, Munagavalasa MS. A deviation from darcy's law due to unsaturated flow in dual-scale porous media Journal of Porous Media. 12: 327-344. DOI: 10.1615/Jpormedia.V12.I4.40 |
0.799 |
|
2009 |
Tan H, Pillai KM. A method to estimate the accuracy of radial Flowg-based permeability measuring devices Journal of Composite Materials. 43: 2307-2332. DOI: 10.1177/0021998308102464 |
0.506 |
|
2009 |
Masoodi R, Pillai KM, Varanasi PP. Role of hydraulic and capillary radii in improving the effectiveness of capillary model in wicking 2008 Proceedings of the Asme Fluids Engineering Division Summer Conference, Fedsm 2008. 1: 251-259. DOI: 10.1115/FEDSM2008-55172 |
0.695 |
|
2009 |
Pillai KM, Prat M, Marcoux M. A study on slow evaporation of liquids in a dual-porosity porous medium using square network model International Journal of Heat and Mass Transfer. 52: 1643-1656. DOI: 10.1016/J.Ijheatmasstransfer.2008.10.007 |
0.311 |
|
2009 |
Tan H, Pillai KM. Finite element implementation of stress-jump and stress-continuity conditions at porous-medium, clear-fluid interface Computers and Fluids. 38: 1118-1131. DOI: 10.1016/J.Compfluid.2008.11.006 |
0.453 |
|
2009 |
Verhagen MA, Duelge T, Pillai KM, Masoodi R. A study of change in properties of polymer composite after the replacement of glass with jute fibers 24th Annual Technical Conference of the American Society For Composites 2009 and 1st Joint Canadian-American Technical Conference On Composites. 4: 2738-2745. |
0.712 |
|
2009 |
Masoodi R, Pillai KM, Verhagen MA. Flow modeling in natural-fiber preforms used in Liquid Composite Molding 24th Annual Technical Conference of the American Society For Composites 2009 and 1st Joint Canadian-American Technical Conference On Composites. 4: 2640-2650. |
0.771 |
|
2008 |
Tan H, Pillai KM. Effect of fiber-mat anisotropy on 1D mold filling in LCM: A numerical investigation Polymer Composites. 29: 869-882. DOI: 10.1002/Pc.20463 |
0.541 |
|
2007 |
Roy T, Hua T, Pillai KM. A method to estimate the accuracy of 1-D flow based permeability measuring devices Journal of Composite Materials. 41: 2037-2055. DOI: 10.1177/0021998307074109 |
0.455 |
|
2007 |
Tan H, Roy T, Pillai KM. Variations in unsaturated flow with flow direction in resin transfer molding: An experimental investigation Composites Part a: Applied Science and Manufacturing. 38: 1872-1892. DOI: 10.1016/J.Compositesa.2007.04.002 |
0.711 |
|
2007 |
Masoodi R, Pillai KM, Varanasi PP. Darcy's law-based models for liquid absorption in polymer wicks Aiche Journal. 53: 2769-2782. DOI: 10.1002/Aic.11322 |
0.739 |
|
2007 |
Tan H, Roy T, Pillai KM. Calibration of 1-d flow and radial flow based permeability measuring devices International Sampe Symposium and Exhibition (Proceedings). 52. |
0.397 |
|
2007 |
Tan H, Pillai KM. A new method to estimate permeability of isotropic fiber mats through radial flow International Sampe Symposium and Exhibition (Proceedings). 52. |
0.425 |
|
2006 |
Munagavalasa MS, Pillai KM. An estimation of effective thermal conductivity of a fibrous dual-scale porous medium during unsaturated flow International Journal of Heat and Mass Transfer. 49: 317-328. DOI: 10.1016/J.Ijheatmasstransfer.2005.06.020 |
0.764 |
|
2005 |
Pillai KM, Jadhav RS. A numerical study of nonisothermal reactive flow in a dual-scale porous medium under partial saturation Numerical Heat Transfer; Part a: Applications. 47: 109-136. DOI: 10.1080/10407780490520841 |
0.531 |
|
2005 |
Roy T, Pillai KM. Characterization of dual-scale fiber mats for unsaturated flow in liquid composite molding Polymer Composites. 26: 756-769. DOI: 10.1002/Pc.20117 |
0.714 |
|
2004 |
Pillai KM. Modeling the unsaturated flow in liquid composite molding processes: A review and some thoughts Journal of Composite Materials. 38: 2097-2118. DOI: 10.1177/0021998304045585 |
0.582 |
|
2004 |
Babu BZ, Pillai KM. Experimental Investigation of the Effect of Fiber-mat Architecture on the Unsaturated Flow in Liquid Composite Molding Journal of Composite Materials. 38: 57-79. DOI: 10.1177/0021998304038176 |
0.558 |
|
2004 |
Pillai KM, Munagavalasa MS. Governing equations for unsaturated flow through woven fiber mats. Part 2. Non-isothermal reactive flows Composites Part a: Applied Science and Manufacturing. 35: 403-415. DOI: 10.1016/J.Compositesa.2004.01.001 |
0.803 |
|
2003 |
Jadhav RS, Pillai KM. Numerical study of heat transfer during unsaturated flow in dual-scale porous media Numerical Heat Transfer; Part a: Applications. 43: 385-407. DOI: 10.1080/10407780307361 |
0.553 |
|
2003 |
Jadhav RS, Pillai KM. Investigation of heat transfer and cure during the unsaturated flow in woven, stitched and unbraided mats Proceedings of the Asme Summer Heat Transfer Conference. 2003: 47-52. |
0.472 |
|
2003 |
Roy T, Babu BZ, Pillai KM. First steps towards quantitative validation of the unsaturated-flow theories in liquid composite molding Proceedings of the Asme Summer Heat Transfer Conference. 2003: 251-258. |
0.446 |
|
2002 |
Pillai KM. Governing equations for unsaturated flow through woven fiber mats. Part 1. Isothermal flows Composites - Part a: Applied Science and Manufacturing. 33: 1007-1019. DOI: 10.1016/S1359-835X(02)00034-9 |
0.606 |
|
2002 |
Babu BZ, Pillai KM. New experimental findings on resin-impregnation process for woven, stitched or braided fiber mats in liquid composite molding International Sampe Symposium and Exhibition (Proceedings). 47: 404-416. |
0.344 |
|
2001 |
Pillai KM, Tucker CL, Phelan FR. Numerical simulation of injection/compression liquid composite molding. Part 2: Preform compression Composites Part a: Applied Science and Manufacturing. 32: 207-220. DOI: 10.1016/S1359-835X(00)00137-8 |
0.453 |
|
2001 |
Slade J, Pillai KM, Advani SG. Investigation of unsaturated flow in woven, braided and stitched fiber mats during mold-filling in resin transfer molding Polymer Composites. 22: 491-505. DOI: 10.1002/Pc.10554 |
0.598 |
|
2000 |
Pillai KM, Tucker CL, Phelan FR. Numerical simulation of injection/compression liquid composite molding. Part 1. Mesh generation Composites Part a: Applied Science and Manufacturing. 31: 87-94. DOI: 10.1016/S1359-835X(99)00052-4 |
0.477 |
|
1998 |
Pillai KM, Advani SG. A Model for Unsaturated Flow in Woven Fiber Preforms during Mold Filling in Resin Transfer Molding Journal of Composite Materials. 32: 1753-1783. DOI: 10.1177/002199839803201902 |
0.565 |
|
1998 |
Pillai KM, Advani SG. Numerical simulation of unsaturated flow in woven fiber preforms during the resin transfer molding process Polymer Composites. 19: 71-80. DOI: 10.1002/Pc.10077 |
0.599 |
|
1998 |
Pillai KM, Advani SG. A model for unsaturated flow in woven fiber preforms during mold filling in resin transfer molding Journal of Composite Materials. 32: 1753-1783. |
0.437 |
|
1998 |
Pillai KM, Advani SG. Numerical simulation of unsaturated flow in Woven fiber preforms during the resin transfer molding process Polymer Composites. 19: 71-80. |
0.522 |
|
1997 |
Parseval YD, Pillai KM, Advani SG. A Simple Model for the Variation of Permeability due to Partial Saturation in Dual Scale Porous Media Transport in Porous Media. 27: 243-264. DOI: 10.1023/A:1006544107324 |
0.536 |
|
1997 |
De Parseval Y, Pillai KM, Advani SG. A Simple Model for the Variation of Permeability due to Partial Saturation in Dual Scale Porous Media Transport in Porous Media. 27: 243-264. |
0.447 |
|
1996 |
Pillai KM, Advani SG. Wicking across a fiber-bank Journal of Colloid and Interface Science. 183: 100-110. DOI: 10.1006/Jcis.1996.0522 |
0.511 |
|
1996 |
Pillai KM, Advani SG. Modeling of void migration in resin transfer molding process American Society of Mechanical Engineers (Paper). |
0.338 |
|
1995 |
Pillai KM, Advani SG. Numerical and analytical study to estimate the effect of two length scales upon the permeability of a fibrous porous medium Transport in Porous Media. 21: 1-17. DOI: 10.1007/Bf00615332 |
0.463 |
|
Show low-probability matches. |