Year |
Citation |
Score |
2020 |
Tsabit AM, Kim M, Yoon D. Effects of various rare-earth additives on the sintering and transmittance of γ-AlON Journal of the European Ceramic Society. 40: 3235-3243. DOI: 10.1016/J.Jeurceramsoc.2020.03.027 |
0.345 |
|
2020 |
Fitriani P, Kwon H, Zhou X, Yoon D. Joining of SiCf/SiC using a layered Ti3SiC2-SiCw and TiC gradient filler Journal of the European Ceramic Society. 40: 1043-1051. DOI: 10.1016/J.Jeurceramsoc.2019.11.080 |
0.334 |
|
2020 |
Fitriani P, Min B, Yoon D. Solid-state joining of SiC using a thin Ti3AlC2, TiC, or Ti filler Journal of the European Ceramic Society. 40: 2716-2720. DOI: 10.1016/J.Jeurceramsoc.2019.09.031 |
0.379 |
|
2020 |
Kwon H, Zhou X, Yoon D. Fabrication of SiCf/Ti3SiC2 by the electrophoresis of highly dispersed Ti3SiC2 powder Ceramics International. 46: 18168-18174. DOI: 10.1016/J.Ceramint.2020.04.138 |
0.409 |
|
2020 |
Yoon D, Reimanis IE. A review on the joining of SiC for high-temperature applications Journal of the Korean Ceramic Society. 57: 246-270. DOI: 10.1007/S43207-020-00021-4 |
0.303 |
|
2020 |
Zhou X, Jing L, Kwon YD, Kim J, Huang Z, Yoon D, Lee J, Huang Q. Fabrication of SiC w /Ti 3 SiC 2 composites with improved thermal conductivity and mechanical properties using spark plasma sintering Journal of Advanced Ceramics. 9: 462-470. DOI: 10.1007/S40145-020-0389-2 |
0.369 |
|
2019 |
Min J, Lee J, Yoon D. Fabrication of transparent γ-AlON by direct 2-step pressureless sintering of Al2O3 and AlN using an AlN-deficient composition Journal of the European Ceramic Society. 39: 4673-4679. DOI: 10.1016/J.Jeurceramsoc.2019.07.030 |
0.391 |
|
2019 |
Spaggiari M, Bianchi G, Santoliquido O, Senn P, Fitriani P, Hazan YD, Penner D, Yoon D, Ortona A. Formation of CeO2 coatings on Si–SiC foams by electrophoretic deposition and sintering in air Ceramics International. 45: 15603-15608. DOI: 10.1016/J.Ceramint.2019.05.070 |
0.341 |
|
2019 |
Muhamad W, Sharma AS, Yoon D. Fabrication and mechanical behavior of ZrB2 strengthened SiCf/SiC composites prepared by hybrid processing route Ceramics International. 45: 3648-3656. DOI: 10.1016/J.Ceramint.2018.11.026 |
0.402 |
|
2018 |
Fitriani P, Sharma AS, Yoon D. Effects of sintering additives on the microstructural and mechanical properties of the ion-irradiated SiCf/SiC Journal of Nuclear Materials. 503: 226-234. DOI: 10.1016/J.Jnucmat.2018.02.045 |
0.336 |
|
2018 |
Fitriani P, Septiadi A, Hyuk JD, Yoon D. Joining of SiC monoliths using a thin MAX phase tape and the elimination of joining layer by solid-state diffusion Journal of the European Ceramic Society. 38: 3433-3440. DOI: 10.1016/J.Jeurceramsoc.2018.04.006 |
0.401 |
|
2018 |
Fitriani P, Yoon D. Joining of SiCf/SiC using a Ti3AlC2 filler and subsequent elimination of the joining layer Ceramics International. 44: 22943-22949. DOI: 10.1016/J.Ceramint.2018.09.090 |
0.402 |
|
2018 |
Jeong D, Septiadi A, Fitriani P, Yoon D. Joining of SiCf/SiC using polycarbosilane and polysilazane preceramic mixtures Ceramics International. 44: 10443-10450. DOI: 10.1016/J.Ceramint.2018.03.061 |
0.36 |
|
2018 |
Fr WM, Yoon D, Raju K, Kim S, Song K, Yu JH. Interfacial microstructure and shear strength of reactive air brazed oxygen transport membrane ceramic-metal alloy joints Metals and Materials International. 24: 157-169. DOI: 10.1007/S12540-017-7160-4 |
0.332 |
|
2017 |
Septiadi A, Fitriani P, Sharma AS, Yoon D. Low Pressure Joining of SiCf/SiC Composites Using Ti3AlC2 or Ti3SiC2 MAX Phase Tape Journal of the Korean Ceramic Society. 54: 340-348. DOI: 10.4191/Kcers.2017.54.4.08 |
0.302 |
|
2017 |
Fitriani P, Septiadi A, Yoon D, Sharma AS. Fabrication of tough SiCf/SiC composites by electrophoretic deposition using a fabric coated with FeO-catalyzed phenolic resin Journal of the European Ceramic Society. 37: 1311-1320. DOI: 10.1016/J.Jeurceramsoc.2016.12.024 |
0.405 |
|
2017 |
Sharma AS, Fitriani P, Yoon D. Fabrication of SiCf/SiC and integrated assemblies for nuclear reactor applications Ceramics International. 43: 17211-17215. DOI: 10.1016/J.Ceramint.2017.09.126 |
0.391 |
|
2017 |
Fitriani P, Yoon D, Sharma AS. Effects of post-sintering annealing on the microstructure and toughness of hot-pressed SiCf/SiC composites with Al2O3-Y2O3 additions Ceramics International. 43: 13330-13338. DOI: 10.1016/J.Ceramint.2017.07.031 |
0.391 |
|
2017 |
Fitriani P, Sharma AS, Septiadi A, Park J, Yoon D. Fabrication of tubular SiCf/SiC using different preform architectures by electrophoretic deposition and hot pressing Ceramics International. 43: 7618-7626. DOI: 10.1016/J.Ceramint.2017.03.056 |
0.335 |
|
2017 |
Kang S, Chae SH, Cheong H, Kim K, Han YS, Lee S, Yoon D, Yi J. Thermal batteries with ceramic felt separators – Part 2: Ionic conductivity, electrochemical and mechanical properties Ceramics International. 43: 4023-4028. DOI: 10.1016/J.Ceramint.2016.12.057 |
0.331 |
|
2017 |
Chae SH, Kang S, Cheong H, Han YS, Yoon D. Thermal batteries with ceramic felt separators – Part 1: Wetting, loading behavior and chemical stability Ceramics International. 43: 4015-4022. DOI: 10.1016/J.Ceramint.2016.11.136 |
0.311 |
|
2016 |
Noviyanto A, Yoon DH, Han YH, Nishimura T. Effect of sintering atmosphere on the grain growth and hardness of SiC/polysilazane ceramic composites Advances in Applied Ceramics. 115: 272-275. DOI: 10.1080/17436753.2015.1136124 |
0.382 |
|
2016 |
Raju K, Muksin, Kim S, Song Ks, Yu JH, Yoon DH. Joining of metal-ceramic using reactive air brazing for oxygen transport membrane applications Materials and Design. 109: 233-241. DOI: 10.1016/J.Matdes.2016.07.068 |
0.326 |
|
2016 |
Fitriani P, Sharma AS, Yoon DH. Microstructure-flexural strength correlation and efficacy of rare earth nitrates on the sintering of SiCf/SiC composites Journal of the European Ceramic Society. 36: 991-999. DOI: 10.1016/J.Jeurceramsoc.2015.11.040 |
0.41 |
|
2016 |
Raju K, Yoon D. Sintering additives for SiC based on the reactivity: A review Ceramics International. 42: 17947-17962. DOI: 10.1016/J.Ceramint.2016.09.022 |
0.382 |
|
2016 |
Raju K, Muksin X, Yoon DH. Reactive air brazing of GDC-LSCF ceramics using Ag-10wt% CuO paste for oxygen transport membrane applications Ceramics International. DOI: 10.1016/J.Ceramint.2016.07.042 |
0.314 |
|
2016 |
Sharma AS, Fitriani P, Yoon DH. Microstructure-fracture behavior correlation of toughened SiCf/SiC composites prepared by vacuum infiltration and hot pressing Ceramics International. DOI: 10.1016/J.Ceramint.2016.02.106 |
0.425 |
|
2016 |
Muksin, Yoon DH, Raju K. Effects of Sc2O3 sintering aid for the densification and mechanical properties of SiC-ZrB2 composites Ceramics International. 42: 7300-7308. DOI: 10.1016/J.Ceramint.2016.01.126 |
0.404 |
|
2016 |
Yoon DH, Muksin, Raju K. Synthesis, Structural, and Magnetic Properties of Co-doped and Mn-doped ZnO Nanocrystalline DMS Prepared by the Facile Polyvinyl Alcohol Gel Method Journal of Superconductivity and Novel Magnetism. 1-6. DOI: 10.1007/S10948-016-3731-8 |
0.309 |
|
2016 |
Darsono N, Yoon DH, Raju K. Effects of the Sintering Conditions on the Structural Phase Evolution and T C of Bi1.6Pb0.4Sr2Ca2Cu3O7 Prepared Using the Citrate sol–gel Method Journal of Superconductivity and Novel Magnetism. 29: 1491-1497. DOI: 10.1007/S10948-016-3459-5 |
0.344 |
|
2016 |
Yoon DH, Muksin, Raju K. Controlling the Magnetic Properties of Nickel Ferrites by Doping with Different Divalent Transition Metal (Co, Cu, and Zn) Cations Journal of Superconductivity and Novel Magnetism. 29: 439-445. DOI: 10.1007/S10948-015-3276-2 |
0.305 |
|
2015 |
Ortona A, Yoon D, Fend T, Feckler G, Smirnova O. Tubular Si-infiltrated SiCf/SiC composites for solar receiver application – Part 2: Thermal performance analysis and prediction Solar Energy Materials and Solar Cells. 140: 382-387. DOI: 10.1016/J.Solmat.2015.04.034 |
0.336 |
|
2015 |
Ortona A, Fend T, Yu H, Raju K, Fitriani P, Yoon D. Tubular Si-infiltrated SiCf/SiC composites for solar receiver application – Part 1: Fabrication by replica and electrophoretic deposition Solar Energy Materials and Solar Cells. 132: 123-130. DOI: 10.1016/J.Solmat.2014.08.029 |
0.368 |
|
2015 |
Raju K, Yu H, Park J, Yoon D. Fabrication of SiCf/SiC composites by alternating current electrophoretic deposition (AC–EPD) and hot pressing Journal of the European Ceramic Society. 35: 503-511. DOI: 10.1016/J.Jeurceramsoc.2014.09.011 |
0.387 |
|
2015 |
Yu H, Fitriani P, Lee S, Park J, Yoon D. Fabrication of the tube-shaped SiCf/SiC by hot pressing Ceramics International. 41: 7890-7896. DOI: 10.1016/J.Ceramint.2015.02.127 |
0.359 |
|
2015 |
Darsono N, Imaduddin A, Raju K, Yoon D. Synthesis and Characterization of Bi1.6Pb0.4Sr2Ca2Cu3O7 Superconducting Oxide by High-Energy Milling Journal of Superconductivity and Novel Magnetism. 28: 2259-2266. DOI: 10.1007/S10948-015-3036-3 |
0.376 |
|
2014 |
Ortona A, Fend T, Yu H, Raju K, Yoon D. Fabrication of cylindrical SiCf/Si/SiC-based composite by electrophoretic deposition and liquid silicon infiltration Journal of the European Ceramic Society. 34: 1131-1138. DOI: 10.1016/J.Jeurceramsoc.2013.10.037 |
0.336 |
|
2014 |
Noviyanto A, Min BK, Yu HW, Yoon DH. Highly dense and fine-grained SiC with a Sc-nitrate sintering additive Journal of the European Ceramic Society. 34: 825-830. DOI: 10.1016/J.Jeurceramsoc.2013.10.001 |
0.334 |
|
2014 |
Lee DY, Yoon DH. Properties of alumina matrix composites reinforced with SiC whisker and carbon nanotubes Ceramics International. 40: 14375-14383. DOI: 10.1016/J.Ceramint.2014.06.030 |
0.367 |
|
2014 |
Han S, Jeong J, Yoon D. Effects of high-energy milling on the solid-state synthesis of pure nano-sized Li 4 Ti 5 O 12 for high power lithium battery applications Applied Physics A. 114: 925-930. DOI: 10.1007/S00339-013-7768-2 |
0.356 |
|
2013 |
Yu H, Raju K, Park JY, Yoon D. SiC 소결에 미치는 Al₂O₃-RE₂O₃첨가제의 영향과 SiC f /SiC 복합체의 제조 Journal of the Korean Ceramic Society. 50: 364-371. DOI: 10.4191/Kcers.2013.50.6.364 |
0.395 |
|
2013 |
Noviyanto A, Yoon D, Lee K, Kim YM, Kim D, Jeong Y, Kim KH, Kwon S, Han Y. Effect of hexagonal-BN on phase transformation of additive-free Si3N4/SiC nanocomposites prepared from amorphous precursor Transactions of Nonferrous Metals Society of China. 23: 420-425. DOI: 10.1016/S1003-6326(13)62479-6 |
0.409 |
|
2013 |
Noviyanto A, Yoon D, Han Y. Phase formation of Si-based ceramic composites from polyureasilazane prepared by hot pressing and EFAS Scripta Materialia. 69: 127-130. DOI: 10.1016/J.Scriptamat.2013.02.011 |
0.35 |
|
2013 |
Noviyanto A, Han S, Yu H, Yoon D. Rare-earth nitrate additives for the sintering of silicon carbide Journal of the European Ceramic Society. 33: 2915-2923. DOI: 10.1016/J.Jeurceramsoc.2013.05.017 |
0.353 |
|
2013 |
Han S, Ryu JH, Jeong J, Yoon D. Solid-state synthesis of Li4Ti5O12 for high power lithium ion battery applications Journal of Alloys and Compounds. 570: 144-149. DOI: 10.1016/J.Jallcom.2013.03.203 |
0.367 |
|
2013 |
Noviyanto A, Yoon D. Rare-earth oxide additives for the sintering of silicon carbide Diamond and Related Materials. 38: 124-130. DOI: 10.1016/J.Diamond.2013.07.003 |
0.362 |
|
2013 |
Yoon DH, Choi YC. Improved field emission stability and uniformity of printed carbon nanotubes prepared using high energy-milled glass frit Current Applied Physics. 13: 1477-14781. DOI: 10.1016/J.Cap.2013.05.001 |
0.325 |
|
2013 |
Noviyanto A, Yoon D. Metal oxide additives for the sintering of silicon carbide: Reactivity and densification Current Applied Physics. 13: 287-292. DOI: 10.1016/J.Cap.2012.07.027 |
0.321 |
|
2012 |
Shin J, Hong C, Yoon D. Effects of TiO2 Starting Materials on the Solid-State Formation of Li4Ti5O12 Journal of the American Ceramic Society. 95: 1894-1900. DOI: 10.1111/J.1551-2916.2012.05165.X |
0.353 |
|
2012 |
Han SW, Shin JW, Yoon DH. Synthesis of pure nano-sized Li 4Ti 5O 12 powder via solid-state reaction using very fine grinding media Ceramics International. 38: 6963-6968. DOI: 10.1016/J.Ceramint.2012.05.072 |
0.365 |
|
2012 |
Hong C, Noviyanto A, Ryu JH, Kim J, Yoon D. Effects of the starting materials and mechanochemical activation on the properties of solid-state reacted Li4Ti5O12 for lithium ion batteries Ceramics International. 38: 301-310. DOI: 10.1016/J.Ceramint.2011.07.007 |
0.38 |
|
2012 |
Shin J, Ryu JH, Jeong J, Yoon D. Effects of post-treatments on the electrochemical properties of solid-state reacted Li4Ti5O12—high energy milling and annealing Journal of Electroceramics. 28: 178-184. DOI: 10.1007/S10832-012-9703-X |
0.38 |
|
2012 |
Shin J, Chung KY, Ryu JH, Park I, Yoon D. Effects of Li/Ti ratios on the electrochemical properties of Li4Ti5O12 examined by time-resolved X-ray diffraction Applied Physics A. 107: 769-775. DOI: 10.1007/S00339-012-6912-8 |
0.372 |
|
2011 |
Noviyanto A, Yoon D. Effects of Hot Pressing Condition on the Properties of SiC f /SiC Composites Journal of the Korean Ceramic Society. 48: 335-341. DOI: 10.4191/Kcers.2011.48.5.335 |
0.352 |
|
2011 |
Jung W, Hong C, Min B, Park J, Yoon D. Thermal Decomposition of Degassed Barium Titanyl Oxalate: In Comparison to the Solid‐State Reaction Mechanism Journal of the American Ceramic Society. 94: 59-65. DOI: 10.1111/J.1551-2916.2010.04064.X |
0.349 |
|
2011 |
Jung W, Min B, Park J, Yoon D. Formation mechanism of barium titanate by thermal decomposition of barium titanyl oxalate Ceramics International. 37: 669-672. DOI: 10.1016/J.Ceramint.2010.09.056 |
0.322 |
|
2010 |
Gil G, Noviyanto A, Han Y, Yoon D. Prevention of Grain Growth during the Liquid-Phase Assisted Sintering of β-SiC Journal of the Korean Ceramic Society. 47: 485-490. DOI: 10.4191/Kcers.2010.47.6.485 |
0.392 |
|
2010 |
Jung W, Kim J, Kim H, Yoon D. Effect of temperature schedule on the particle size of barium titanate during solid-state reaction Materials Letters. 64: 170-172. DOI: 10.1016/J.Matlet.2009.10.035 |
0.329 |
|
2010 |
Jung W, Park J, Park Y, Yoon D. Effects of impurities on the properties of BaTiO3 synthesized from barium titanyl oxalate Ceramics International. 36: 1997-2002. DOI: 10.1016/J.Ceramint.2010.03.033 |
0.385 |
|
2010 |
Jung W, Park H, Kang YJ, Yoon D. Lowering the sintering temperature of Gd-doped ceria by mechanochemical activation Ceramics International. 36: 371-374. DOI: 10.1016/J.Ceramint.2009.07.020 |
0.368 |
|
2009 |
Lee J, Gil G, Yoon D. Fabrication of SiCf/SiC Composites using an Electrophoretic Deposition Journal of the Korean Ceramic Society. 46: 447-451. DOI: 10.4191/Kcers.2009.46.5.447 |
0.359 |
|
2009 |
Yonathan P, Lee J, Yoon D, Kim W, Park J. Improvement of SiCf/SiC density by slurry infiltration and tape stacking Materials Research Bulletin. 44: 2116-2122. DOI: 10.1016/J.Materresbull.2009.07.004 |
0.335 |
|
2009 |
Kim J, Jung W, Kim H, Yoon D. Properties of BaTiO3 synthesized from barium titanyl oxalate Ceramics International. 35: 2337-2342. DOI: 10.1016/J.Ceramint.2009.01.006 |
0.35 |
|
2008 |
Darsono N, Yoon D, Kim J. Milling and dispersion of multi-walled carbon nanotubes in texanol Applied Surface Science. 254: 3412-3419. DOI: 10.1016/J.Apsusc.2007.11.028 |
0.307 |
|
2008 |
Lee J, Yonathan P, Kim H, Yoon D, Kim J. Optimization of field emission properties from multi-walled carbon nanotubes using ceramic fillers Applied Physics A. 93: 511-516. DOI: 10.1007/S00339-008-4797-3 |
0.307 |
|
2007 |
Kwon S, Yoon D. Tetragonality of nano-sized barium titanate powder prepared with growth inhibitors upon heat treatment Journal of the European Ceramic Society. 27: 247-252. DOI: 10.1016/J.Jeurceramsoc.2006.02.031 |
0.334 |
|
2007 |
Kwon S, Yoon D. Effects of heat treatment and particle size on the tetragonality of nano-sized barium titanate powder Ceramics International. 33: 1357-1362. DOI: 10.1016/J.Ceramint.2006.05.008 |
0.348 |
|
2007 |
Ryu S, Yoon D. Solid-state synthesis of nano-sized BaTiO3 powder with high tetragonality Journal of Materials Science. 42: 7093-7099. DOI: 10.1007/S10853-007-1537-6 |
0.374 |
|
2007 |
Ryu S, Lee S, Yoon D. Synthesis of fine Ca-doped BaTiO3 powders by solid-state reaction method-Part I: Mechanical activation of starting materials Journal of Electroceramics. 18: 243-250. DOI: 10.1007/S10832-007-9066-X |
0.383 |
|
2007 |
Lee S, Ryu S, Yoon D. Synthesis of fine Ca-doped BaTiO3 powders by solid-state reaction method—Part II: Rheological study on milling Journal of Electroceramics. 18: 1-7. DOI: 10.1007/S10832-007-9000-2 |
0.341 |
|
2006 |
Kwon S, Darsono N, Yoon D. Optimization of Barium Titanate Slip for Tape Casting Using Design of Experiments Journal of the Korean Ceramic Society. 43: 519-526. DOI: 10.4191/Kcers.2006.43.9.519 |
0.37 |
|
2004 |
Yoon D, Lee BI. Effects of Excess Barium Ions on Aqueous Barium Titanate Tape Properties Journal of the American Ceramic Society. 87: 1066-1071. DOI: 10.1111/J.1551-2916.2004.01066.X |
0.545 |
|
2004 |
Yoon D, Lee BI. Processing of barium titanate tapes with different binders for MLCC applications—Part II: Comparison of the properties Journal of the European Ceramic Society. 24: 753-761. DOI: 10.1016/S0955-2219(03)00334-0 |
0.537 |
|
2004 |
Yoon D, Lee BI. Processing of barium titanate tapes with different binders for MLCC applications—Part I: Optimization using design of experiments Journal of the European Ceramic Society. 24: 739-752. DOI: 10.1016/S0955-2219(03)00333-9 |
0.548 |
|
2004 |
Yoon D, Lee BI. Effects on aqueous barium titanate tape properties of passivation of barium ion leaching by using dispersants Journal of the European Ceramic Society. 24: 3747-3752. DOI: 10.1016/J.Jeurceramsoc.2004.01.001 |
0.515 |
|
2004 |
Qi L, Lee BI, Badheka P, Yoon D, Samuels WD, Exarhos GJ. Short-range dissolution–precipitation crystallization of hydrothermal barium titanate Journal of the European Ceramic Society. 24: 3553-3557. DOI: 10.1016/J.Jeurceramsoc.2003.12.007 |
0.694 |
|
2003 |
Yoon D, Lee BI, Badheka P, Wang X. Barium ion leaching from barium titanate powder in water Journal of Materials Science: Materials in Electronics. 14: 165-169. DOI: 10.1023/A:1022306024907 |
0.513 |
|
2003 |
Yoon D, Zhang J, Lee BI. Dielectric constant and mixing model of BaTiO3 composite thick films Materials Research Bulletin. 38: 765-772. DOI: 10.1016/S0025-5408(03)00075-8 |
0.541 |
|
Show low-probability matches. |