Year |
Citation |
Score |
2021 |
Lin W, Jana SC. Analysis of porous structures of cellulose Aerogel monoliths and microparticles Microporous and Mesoporous Materials. 310: 110625. DOI: 10.1016/J.Micromeso.2020.110625 |
0.306 |
|
2020 |
Ghosh M, Jana SC. Fabrication of Hollow and Porous Tin-Doped Indium Oxide Nanofibers and Microtubes via a Gas Jet Fiber Spinning Process. Materials (Basel, Switzerland). 13. PMID 32230771 DOI: 10.3390/Ma13071539 |
0.408 |
|
2020 |
Zhan C, Jana SC. Shrinkage reduced polyimide-graphene oxide composite aerogel for oil absorption Microporous and Mesoporous Materials. 307: 110501. DOI: 10.1016/J.Micromeso.2020.110501 |
0.304 |
|
2019 |
Quade DJ, Jana SC, Morscher GN, Kanaan M, McCorkle L. The Effect of Thin Film Adhesives on Mode II Interlaminar Fracture Toughness in Carbon Fiber Composites with Shape Memory Alloy Inserts. Mechanics of Materials : An International Journal. 131: 22-32. PMID 33005067 DOI: 10.1016/J.Mechmat.2019.01.002 |
0.365 |
|
2019 |
Quade DJ, Jana SC, Morscher GN, Kanaan M. The Effect of Thin Film Adhesives on Mode I Interlaminar Fracture Toughness in Carbon Fiber Composites with Shape Memory Alloy Inserts. Engineering Fracture Mechanics. 206: 131-146. PMID 32905536 DOI: 10.1016/J.Engfracmech.2018.11.040 |
0.327 |
|
2019 |
Quade DJ, Jana S, McCorkle LS. The influence of thin film adhesives in pullout tests between nickel–titanium shape memory alloy and carbon fiber reinforced polymer matrix composites Composites Part B-Engineering. 176: 107321. DOI: 10.1016/J.Compositesb.2019.107321 |
0.377 |
|
2018 |
Quade D, Jana S, Morscher G, Kannan M, McCorkle L. The Effects of Fiber Orientation and Adhesives on Tensile Properties of Carbon Fiber Reinforced Polymer Matrix Composite with Embedded Nickel-Titanium Shape Memory Alloys. Composites. Part a, Applied Science and Manufacturing. 114: 269-277. PMID 32055231 DOI: 10.1016/J.Compositesa.2018.08.019 |
0.394 |
|
2018 |
Teo N, Jana SC. Solvent Effects on Tuning Pore Structures in Polyimide Aerogels. Langmuir : the Acs Journal of Surfaces and Colloids. PMID 29957959 DOI: 10.1021/Acs.Langmuir.8B01513 |
0.385 |
|
2018 |
Raut P, Swanson N, Kulkarni A, Pugh C, Jana SC. Exploiting arene-perfluoroarene interactions for dispersion of carbon black in rubber compounds Polymer. 148: 247-258. DOI: 10.1016/J.Polymer.2018.06.025 |
0.312 |
|
2018 |
Shinko A, Jana SC, Meador MA. Crosslinked polyurea-co-polyurethane aerogels with hierarchical structures and low stiffness Journal of Non-Crystalline Solids. 487: 19-27. DOI: 10.1016/J.Jnoncrysol.2018.02.020 |
0.342 |
|
2017 |
Teo N, Jana SC. Open Cell Aerogel Foams via Emulsion Templating. Langmuir : the Acs Journal of Surfaces and Colloids. PMID 29048907 DOI: 10.1021/Acs.Langmuir.7B03139 |
0.32 |
|
2017 |
Zhai C, Jana SC. TUNING POROUS NETWORKS IN POLYIMIDE AEROGELS FOR AIRBORNE NANOPARTICLE FILTRATION. Acs Applied Materials & Interfaces. PMID 28806054 DOI: 10.1021/Acsami.7B09345 |
0.308 |
|
2017 |
Kim SJ, Raut P, Jana SC, Chase G. Electrostatically Active Polymer Hybrid Aerogels for Airborne Nanoparticle Filtration. Acs Applied Materials & Interfaces. PMID 28177211 DOI: 10.1021/Acsami.6B14784 |
0.34 |
|
2017 |
Rajgarhia SS, Jana SC. Effect of Solvent Volatility on Diameter Selection of Bicomponent Nanofibers Produced by Gas Jet Fiber Process Test International Polymer Processing. 32: 582-589. DOI: 10.3139/217.3453 |
0.475 |
|
2017 |
Gu S, Jana SC. Open cell aerogel foams with hierarchical pore structures Polymer. 125: 1-9. DOI: 10.1016/J.Polymer.2017.07.085 |
0.394 |
|
2017 |
Rajgarhia S, Jana SC. Influence of secondary stretching on diameter and morphology of bicomponent polymer nanofibers produced by gas jet fiber process Polymer. 123: 219-231. DOI: 10.1016/J.Polymer.2017.07.032 |
0.409 |
|
2017 |
Kim SJ, Jana SC. Effects of skin layers on air permeability in macroporous polymer aerogels Polymer. 126: 432-436. DOI: 10.1016/J.Polymer.2017.03.039 |
0.319 |
|
2017 |
Jana SC. The Changing Landscape of Polymer Research: Future polymer research activities are likely to focus on new applications where plastics have not been traditionally used Plastics Engineering. 73: 50-52. DOI: 10.1002/J.1941-9635.2017.Tb01758.X |
0.388 |
|
2017 |
Li H, Gu S, Thomas S, Liu T, Jana SC. Investigation of polybenzoxazine gelation using laser light scattering Journal of Applied Polymer Science. 135: 45709. DOI: 10.1002/App.45709 |
0.308 |
|
2016 |
Rajgarhia S, Jana SC, Chase GG. Separation of water from ultra-low sulphur diesel using novel polymer nanofiber-coated glass fiber media. Acs Applied Materials & Interfaces. PMID 27486993 DOI: 10.1021/Acsami.6B07364 |
0.428 |
|
2016 |
Saengthaveep S, Jana SC, Magaraphan R. Flow and structure of compatibilized Nylon12/natural rubber blend with functional copolymer Journal of Elastomers and Plastics. 48: 614-639. DOI: 10.1177/0095244315613619 |
0.39 |
|
2016 |
Kim SJ, Chase G, Jana SC. The role of mesopores in achieving high efficiency airborne nanoparticle filtration using aerogel monoliths Separation and Purification Technology. 166: 48-54. DOI: 10.1016/J.Seppur.2016.04.017 |
0.31 |
|
2016 |
Rajgarhia SS, Benavides RE, Jana SC. Morphology control of bi-component polymer nanofibers produced by gas jet process Polymer (United Kingdom). 93: 142-151. DOI: 10.1016/J.Polymer.2016.04.018 |
0.798 |
|
2016 |
Duan Y, Jana SC, Lama B, Espe MP. Hydrophobic silica aerogels by silylation Journal of Non-Crystalline Solids. 437: 26-33. DOI: 10.1016/J.Jnoncrysol.2016.01.016 |
0.53 |
|
2016 |
Saengthaveep S, Jana SC, Magaraphan R. Correlation of viscosity ratio, morphology, and mechanical properties of polyamide 12/natural rubber blends via reactive compatibilization Journal of Polymer Research. 23. DOI: 10.1007/S10965-016-0985-6 |
0.436 |
|
2016 |
Rajgarhia SS, Jana SC. Comparison of Electrospinning and Gas Jet Fiber Processes for Fabrication of Bi-Component Polymer Nanofibers from Single Solutions Macromolecular Symposia. 369: 8-13. DOI: 10.1002/Masy.201600080 |
0.494 |
|
2015 |
Ghosh M, Jana SC. Bi-component inorganic oxide nanofibers from gas jet fiber spinning process Rsc Advances. 5: 105313-105318. DOI: 10.1039/C5Ra20963C |
0.409 |
|
2015 |
Shinko A, Jana SC, Meador MA. Crosslinked polyurea aerogels with controlled porosity Rsc Advances. 5: 105329-105338. DOI: 10.1039/C5Ra20788F |
0.347 |
|
2015 |
Duan Y, Jana SC, Lama B, Espe MP. Self-crosslinkable poly(urethane urea)-reinforced silica aerogels Rsc Advances. 5: 71551-71558. DOI: 10.1039/C5Ra11769K |
0.6 |
|
2015 |
Kim SJ, Chase G, Jana SC. Polymer aerogels for efficient removal of airborne nanoparticles Separation and Purification Technology. DOI: 10.1016/J.Seppur.2015.11.005 |
0.347 |
|
2014 |
Saengthaveep S, Jana SC, Magaraphan R. Phase morphology, thermal and mechanical properties of compatibilized Nylon12/natural rubber blends using PS/MNR Advanced Materials Research. 844: 53-56. DOI: 10.4028/Www.Scientific.Net/Amr.844.53 |
0.393 |
|
2014 |
Shang JH, Benavides RE, Jana SC. Effects of polymer viscosity and nanofillers on morphology of nanofibers obtained by a gas jet method International Polymer Processing. 29: 103-111. DOI: 10.3139/217.2817 |
0.808 |
|
2014 |
Bahl K, Swanson N, Pugh C, Jana SC. Polybutadiene-g-polypentafluorostyrene as a coupling agent for lignin-filled rubber compounds Polymer (United Kingdom). 55: 6754-6763. DOI: 10.1016/J.Polymer.2014.11.008 |
0.706 |
|
2014 |
Bahl K, Miyoshi T, Jana SC. Hybrid fillers of lignin and carbon black for lowering of viscoelastic loss in rubber compounds Polymer (United Kingdom). 55: 3825-3835. DOI: 10.1016/J.Polymer.2014.06.061 |
0.721 |
|
2014 |
Bahl K, Jana SC. Surface modification of lignosulfonates for reinforcement of styrene-butadiene rubber compounds Journal of Applied Polymer Science. 131. DOI: 10.1002/App.40123 |
0.72 |
|
2014 |
Rajgarhia SS, Jana SC. Effect of solvent volatility on diameter selection of nanofibers produced by Gas Jet Fiber process Annual Technical Conference - Antec, Conference Proceedings. 1: 858-861. |
0.422 |
|
2013 |
Wang X, Jana SC. Synergistic hybrid organic-inorganic aerogels. Acs Applied Materials & Interfaces. 5: 6423-9. PMID 23773123 DOI: 10.1021/Am401717S |
0.317 |
|
2013 |
Duan Y, Jana SC, Lama B, Espe MP. Reinforcement of silica aerogels using silane-end-capped polyurethanes. Langmuir : the Acs Journal of Surfaces and Colloids. 29: 6156-65. PMID 23611433 DOI: 10.1021/La4007394 |
0.58 |
|
2013 |
Wang X, Jana SC. Tailoring of morphology and surface properties of syndiotactic polystyrene aerogels. Langmuir : the Acs Journal of Surfaces and Colloids. 29: 5589-98. PMID 23573990 DOI: 10.1021/La400492M |
0.324 |
|
2013 |
Saengthaveep S, Jana SC, Magaraphan R. Natural rubber-toughened polystyrene: Effects of mixing procedure and maleic anhydride content on impact property and phase morphology Advanced Materials Research. 747: 607-610. DOI: 10.4028/Www.Scientific.Net/Amr.747.607 |
0.386 |
|
2013 |
Wang X, Zhang H, Jana SC. Sulfonated syndiotactic polystyrene aerogels: Properties and applications Journal of Materials Chemistry A. 1: 13989-13999. DOI: 10.1039/C3Ta13099A |
0.353 |
|
2013 |
Randall JP, Meador MAB, Jana SC. Polymer reinforced silica aerogels: Effects of dimethyldiethoxysilane and bis(trimethoxysilylpropyl)amine as silane precursors Journal of Materials Chemistry A. 1: 6642-6652. DOI: 10.1039/C3Ta11019B |
0.365 |
|
2013 |
Benavides RE, Jana SC, Reneker DH. Role of liquid jet stretching and bending instability in nanofiber formation by gas jet method Macromolecules. 46: 6081-6090. DOI: 10.1021/Ma400900S |
0.801 |
|
2013 |
Wang X, Jana SC. Syndiotactic polystyrene aerogels containing multi-walled carbon nanotubes Polymer (United Kingdom). 54: 750-759. DOI: 10.1016/J.Polymer.2012.12.025 |
0.354 |
|
2012 |
Benavides RE, Jana SC, Reneker DH. Nanofibers from Scalable Gas Jet Process. Acs Macro Letters. 1: 1032-1036. PMID 35607032 DOI: 10.1021/mz300297g |
0.806 |
|
2012 |
Duan Y, Jana SC, Reinsel AM, Lama B, Espe MP. Surface modification and reinforcement of silica aerogels using polyhedral oligomeric silsesquioxanes. Langmuir : the Acs Journal of Surfaces and Colloids. 28: 15362-71. PMID 23046155 DOI: 10.1021/La302945B |
0.497 |
|
2012 |
Beltrán-Osuna ÁA, Cao B, Cheng G, Jana SC, Espe MP, Lama B. New antifouling silica hydrogel. Langmuir : the Acs Journal of Surfaces and Colloids. 28: 9700-6. PMID 22607091 DOI: 10.1021/La301561J |
0.42 |
|
2012 |
Yuhana NY, Ahmad S, Kamal MR, Jana SC, Shamsul Bahri AR. Transmission electron microscopy study of room temperature cured PMMA grafted natural rubber toughened epoxy/layered silicate nanocomposite Plastics, Rubber and Composites. 41: 390-395. DOI: 10.1179/1743289812Y.0000000021 |
0.385 |
|
2012 |
Mago G, Jana SC, Ray SS, McNally T. Polymer nanocomposite processing, characterization, and applications 2012 Journal of Nanomaterials. 2012. DOI: 10.1155/2012/924849 |
0.311 |
|
2012 |
Yuhana NY, Ahmad S, Kamal MR, Jana SC, Bahri ARS. Morphological study on room-temperature-cured PMMA-grafted natural rubber-toughened epoxy/layered silicate nanocomposite Journal of Nanomaterials. 2012. DOI: 10.1155/2012/760401 |
0.352 |
|
2012 |
Pisitsak P, Magaraphan R, Jana SC. Electrically conductive compounds of polycarbonate, liquid crystalline polymer, and multiwalled carbon nanotubes Journal of Nanomaterials. 2012. DOI: 10.1155/2012/642080 |
0.36 |
|
2012 |
Benavides RE, Jana SC, Reneker DH. Nanofibers from scalable gas jet process Acs Macro Letters. 1: 1032-1036. DOI: 10.1021/Mz300297G |
0.805 |
|
2012 |
Roy S, Lee BJ, Kakish ZM, Jana SC. Exploiting POSS-sorbitol interactions: Issues of reinforcement of isotactic polypropylene spun fibers Macromolecules. 45: 2420-2433. DOI: 10.1021/Ma202783P |
0.576 |
|
2012 |
Roy S, Feng J, Scionti V, Jana SC, Wesdemiotis C. Self-assembled structure formation from interactions between polyhedral oligomeric silsesquioxane and sorbitol in preparation of polymer compounds Polymer. 53: 1711-1724. DOI: 10.1016/J.Polymer.2012.02.034 |
0.553 |
|
2012 |
Benavides RE, Jana SC, Reneker D. Producing nano and micro fibers by using jets of gas Annual Technical Conference - Antec, Conference Proceedings. 2: 905-912. |
0.788 |
|
2011 |
Randall JP, Meador MA, Jana SC. Tailoring mechanical properties of aerogels for aerospace applications. Acs Applied Materials & Interfaces. 3: 613-26. PMID 21361281 DOI: 10.1021/Am200007N |
0.449 |
|
2011 |
Mago G, Kalyon DM, Jana SC. Polymer nanocomposite processing, characterization and applications 2011 Journal of Nanomaterials. 2011. DOI: 10.1155/2011/917474 |
0.423 |
|
2011 |
Roy S, Scionti V, Jana SC, Wesdemiotis C, Pischera AM, Espe MP. Sorbitol-POSS interactions on development of isotactic polypropylene composites Macromolecules. 44: 8064-8079. DOI: 10.1021/Ma201595J |
0.528 |
|
2011 |
Gunes IS, Pérez-Bolívar C, Jimenez GA, Celikbicak O, Li F, Anzenbacher P, Wesdemiotis C, Jana SC. Analysis of energy transfer and ternary non-covalent filler/matrix/UV stabilizer interactions in carbon nanofiber and oxidized carbon nanofiber filled poly(methyl methacrylate) composites Polymer. 52: 5355-5361. DOI: 10.1016/J.Polymer.2011.09.011 |
0.349 |
|
2010 |
Mago G, Kalyon DM, Jana SC, Fisher FT. Polymer nanocomposite processing, characterization, and applications Journal of Nanomaterials. 2010. DOI: 10.1155/2010/325807 |
0.423 |
|
2010 |
Perilla JE, Lee BJ, Jana SC. Rheological investigation of interactions between sorbitol and polyhedral oligomeric silsesquioxane in development of nanocomposites of isotactic polypropylene Journal of Rheology. 54: 761-779. DOI: 10.1122/1.3439695 |
0.557 |
|
2010 |
Gunes IS, Pérez-Bolivar C, Cao F, Jimenez GA, Anzenbacher P, Jana SC. Analysis of non-covalent interactions between the nanoparticulate fillers and the matrix polymer as applied to shape memory performance Journal of Materials Chemistry. 20: 3467-3474. DOI: 10.1039/B922027E |
0.372 |
|
2009 |
Ertekin A, Jana SC, Thomas RR. An investigation on the capillary wetting of glass fiber tow and fabric structures with nanoclay-enriched reactive epoxy and silicone oil mixtures. Acs Applied Materials & Interfaces. 1: 1662-71. PMID 20355781 DOI: 10.1021/Am900179X |
0.365 |
|
2009 |
Gunes IS, Jimenez GA, Jana SC. Shape memory actuation by resistive heating in polyurethane composites of carbonaceous conductive fillers Materials Research Society Symposium Proceedings. 1129: 155-160. DOI: 10.1557/Proc-1129-V12-05 |
0.33 |
|
2009 |
Gunes IS, Jimenez GA, Jana SC. Carbonaceous fillers for shape memory actuation of polyurethane composites by resistive heating Carbon. 47: 981-997. DOI: 10.1016/J.Carbon.2008.11.053 |
0.32 |
|
2009 |
Jimenez GA, Jana SC. Composites of carbon nanofibers and thermoplastic polyurethanes with shape-memory properties prepared by chaotic mixing Polymer Engineering and Science. 49: 2020-2030. DOI: 10.1002/Pen.21442 |
0.357 |
|
2008 |
Gunes SI, Jana SC. Shape memory polymers and their nanocomposites: a review of science and technology of new multifunctional materials. Journal of Nanoscience and Nanotechnology. 8: 1616-37. PMID 18572561 DOI: 10.1166/Jnn.2008.18227 |
0.38 |
|
2008 |
Gunes IS, Cao F, Jana SC. Evaluation of nanoparticulate fillers for development of shape memory polyurethane nanocomposites Polymer. 49: 2223-2234. DOI: 10.1016/J.Polymer.2008.03.021 |
0.31 |
|
2008 |
Du L, Jana SC. Hygrothermal effects on properties of highly conductive epoxy/graphite composites for applications as bipolar plates Journal of Power Sources. 182: 223-229. DOI: 10.1016/J.Jpowsour.2008.03.071 |
0.336 |
|
2007 |
Gintert MJ, Jana SC, Miller SG. A novel strategy for nanoclay exfoliation in thermoset polyimide nanocomposite systems Polymer. 48: 4166-4173. DOI: 10.1016/J.Polymer.2007.05.053 |
0.356 |
|
2007 |
Cao F, Jana SC. Nanoclay-tethered shape memory polyurethane nanocomposites Polymer. 48: 3790-3800. DOI: 10.1016/J.Polymer.2007.04.027 |
0.349 |
|
2007 |
Du L, Jana SC. Highly conductive epoxy/graphite composites for bipolar plates in proton exchange membrane fuel cells Journal of Power Sources. 172: 734-741. DOI: 10.1016/J.Jpowsour.2007.05.088 |
0.333 |
|
2007 |
Jimenez GA, Jana SC. Electrically conductive polymer nanocomposites of polymethylmethacrylate and carbon nanofibers prepared by chaotic mixing Composites Part a: Applied Science and Manufacturing. 38: 983-993. DOI: 10.1016/J.Compositesa.2006.06.017 |
0.393 |
|
2007 |
Jimenez GA, Jana SC. Oxidized carbon nanofiber/polymer composites prepared by chaotic mixing Carbon. 45: 2079-2091. DOI: 10.1016/J.Carbon.2007.05.015 |
0.433 |
|
2007 |
Gintert MJ, Jana SC, Miller SG. Evaluation of nanoclay exfoliation strategies for thermoset polyimide nanocomposite systems International Sampe Symposium and Exhibition (Proceedings). 52. |
0.306 |
|
2006 |
Dharaiya DP, Jana SC, Lyuksyutov SF. Production of electrically conductive networks in immiscible polymer blends by chaotic mixing Polymer Engineering and Science. 46: 19-28. DOI: 10.1002/Pen.20445 |
0.441 |
|
2006 |
Jana SC, Dharaiya D, Sau M. Particulate fillers on morphology development in chaotic mixing Annual Technical Conference - Antec, Conference Proceedings. 4: 2132-2136. |
0.708 |
|
2006 |
Jana SC, Jung CD, Pattanayak A, Jimenez G. Chemical and engineering issues in polymer nanocomposites synthesis and product design 6th World Congress: Enabling Technologies and New Markets, Nanocomposites 2006. |
0.598 |
|
2006 |
Jana SC, Dharaiya D, Pattanayak A, Jung CD. Chemical and engineering issues in polymer nanocomposites design Annual Technical Conference - Antec, Conference Proceedings. 1: 496-500. |
0.622 |
|
2005 |
Dharaiya D, Jana SC. Thermal decomposition of alkyl ammonium ions and its effects on surface polarity of organically treated nanoclay Polymer. 46: 10139-10147. DOI: 10.1016/J.Polymer.2005.08.027 |
0.333 |
|
2005 |
Pattanayak A, Jana SC. Thermoplastic polyurethane nanocomposites of reactive silicate clays: Effects of soft segments on properties Polymer. 46: 5183-5193. DOI: 10.1016/J.Polymer.2005.04.035 |
0.678 |
|
2005 |
Pattanayak A, Jana SC. Properties of bulk-polymerized thermoplastic polyurethane nanocomposites Polymer. 46: 3394-3406. DOI: 10.1016/J.Polymer.2005.03.021 |
0.661 |
|
2005 |
Pattanayak A, Jana SC. Synthesis of thermoplastic polyurethane nanocomposites of reactive nanoclay by bulk polymerization methods Polymer. 46: 3275-3288. DOI: 10.1016/J.Polymer.2005.02.081 |
0.678 |
|
2005 |
Dharaiya DP, Jana SC. Nanoclay-induced morphology development in chaotic mixing of immiscible polymers Journal of Polymer Science, Part B: Polymer Physics. 43: 3638-3651. DOI: 10.1002/Polb.20657 |
0.413 |
|
2005 |
Pattanayak A, Jana SC. High-strength and low-stiffness composites of nanoclay-filled thermoplastic polyurethanes Polymer Engineering and Science. 45: 1532-1539. DOI: 10.1002/Pen.20373 |
0.639 |
|
2005 |
Perilla JE, Jana SC. Coalescence of immiscible polymer blends in chaotic mixers Aiche Journal. 51: 2675-2685. DOI: 10.1002/Aic.10500 |
0.432 |
|
2005 |
Pattanayak A, Jana SC. Thermoplastic polyurethane nanocomposites of reactive silicate clays Annual Technical Conference - Antec, Conference Proceedings. 5: 261-265. |
0.641 |
|
2005 |
Jana SC, Pattanayak A, Dharaiya D. Nanocomposites design by nanofiller-polymer reactions and by novel blending 5th World Congress: Enabling Technologies and New Markets, Nanocomposites 2005. |
0.643 |
|
2004 |
Park J, Jana SC. Adverse effects of thermal dissociation of alkyl ammonium ions on nanoclay exfoliation in epoxy-clay systems Polymer. 45: 7673-7679. DOI: 10.1016/J.Polymer.2004.08.075 |
0.318 |
|
2004 |
Jana SC, Sau M. Effects of viscosity ratio and composition on development of morphology in chaotic mixing of polymers Polymer. 45: 1665-1678. DOI: 10.1016/J.Polymer.2003.12.047 |
0.715 |
|
2004 |
Perilla JE, Jana SC. A time-scale approach for analysis of coalescence in processing flows Polymer Engineering and Science. 44: 2254-2265. DOI: 10.1002/Pen.20253 |
0.363 |
|
2004 |
Hong CM, Kim J, Jana SC. Shear-induced migration of conductive fillers in injection molding Polymer Engineering and Science. 44: 2101-2109. DOI: 10.1002/Pen.20215 |
0.372 |
|
2004 |
Sau M, Jana SC. A study on the effects of chaotic mixer design and operating conditions on morphology development in immiscible polymer systems Polymer Engineering and Science. 44: 407-422. DOI: 10.1002/Pen.20037 |
0.721 |
|
2004 |
Sau M, Jana SC. Effect of waveforms on morphology development in chaotic mixing of polymers Aiche Journal. 50: 2346-2358. DOI: 10.1002/Aic.10198 |
0.692 |
|
2004 |
Hong CM, Jana SC. Shear-induced migration of glass beads during injection molding in filled polymer compound and its effect on mechanical properties and electrical conductivity Annual Technical Conference - Antec, Conference Proceedings. 2: 1841-1845. |
0.306 |
|
2004 |
Chandra A, Jana SC. Effect of morpholgy on mechanical properties of composites prepared by reaction-induced phase separation Annual Technical Conference - Antec, Conference Proceedings. 3: 2976-2980. |
0.343 |
|
2004 |
Dharaiya D, Jana SC. The effects of nanoclay on morphology development in immiscible polymer systems by chaotic mixing Annual Technical Conference - Antec, Conference Proceedings. 3: 2798-2802. |
0.343 |
|
2004 |
Pattanayak A, Jana SC. Polyurethane-clay nanocomposites via bulk polymerization methods Annual Technical Conference - Antec, Conference Proceedings. 2: 1962-1966. |
0.642 |
|
2003 |
Park J, Jana SC. Effect of plasticization of epoxy networks by organic modifier on exfoliation of nanoclay Macromolecules. 36: 8391-8397. DOI: 10.1021/Ma0303465 |
0.339 |
|
2003 |
Park J, Jana SC. Mechanism of exfoliation of nanoclay particles in epoxy-clay nanocomposites Annual Technical Conference - Antec, Conference Proceedings. 2: 1438-1442. DOI: 10.1021/Ma021509C |
0.351 |
|
2003 |
Park JH, Jana SC. The relationship between nano- and micro-structures and mechanical properties in PMMA-epoxy-nanoclay composites Polymer. 44: 2091-2100. DOI: 10.1016/S0032-3861(03)00075-2 |
0.407 |
|
2003 |
Dharaiya D, Jana SC, Shafi A. A Study on the Use of Phenoxy Resins as Compatibilizers of Polyamide 6 (PA6) and Polybutylene Terephthalate (PBT) Polymer Engineering and Science. 43: 580-595. DOI: 10.1002/Pen.10047 |
0.402 |
|
2003 |
Jana SC. Loss of Surface and Volume Electrical Conductivities in Polymer Compounds Due to Shear-Induced Migration of Conductive Particles Polymer Engineering and Science. 43: 570-579. DOI: 10.1002/Pen.10046 |
0.422 |
|
2003 |
Chandra A, Jana SC. Fiber-reinforcement of composites by reaction-induced phase separation Annual Technical Conference - Antec, Conference Proceedings. 2: 2173-2177. |
0.374 |
|
2003 |
Park J, Jana SC. Epoxy-aided dispersion of nanoclay in PMMA Annual Technical Conference - Antec, Conference Proceedings. 2: 1443-1447. |
0.308 |
|
2003 |
Perilla JE, Jana SC. Time-scales of coalescence in polymer processing: Study on polypropylene/polyamide-6 blends Annual Technical Conference - Antec, Conference Proceedings. 2: 2360-2364. |
0.352 |
|
2003 |
Pattanayak A, Jana SC. A study on intercalation and exfoliation of layered silicate nanoparticles in thermoplastic polyurethanes Annual Technical Conference - Antec, Conference Proceedings. 2: 1424-1428. |
0.637 |
|
2003 |
Sau M, Jana SC. Morphology development in PA6/PP system by chaotic mixing: Effect of viscosity ratio and composition Annual Technical Conference - Antec, Conference Proceedings. 2: 1508-1512. |
0.691 |
|
2003 |
Sau M, Jana SC. A study on the effects of chaotic mixer design and operating conditions on the development of morphology in immiscible polymer systems Annual Technical Conference - Antec, Conference Proceedings. 2: 1556-1560. |
0.707 |
|
2002 |
Jana SC, Prieto A. On the development of natural fiber composites of high-temperature thermoplastic polymers Journal of Applied Polymer Science. 86: 2159-2167. DOI: 10.1002/App.11073 |
0.48 |
|
2002 |
Jana SC, Prieto A. Natural fiber composites of high-temperature thermoplastic polymers: Effects of coupling agents Journal of Applied Polymer Science. 86: 2168-2173. DOI: 10.1002/App.11072 |
0.459 |
|
2001 |
Jana SC, Patel N, Dharaiya D. Compatibilization of PBT-PPE blends using low molecular weight epoxy Polymer. 42: 8681-8693. DOI: 10.1016/S0032-3861(01)00410-4 |
0.408 |
|
2001 |
Jana SC, Jain S. Dispersion of nanofillers in high performance polymers using reactive solvents as processing aids Polymer. 42: 6897-6905. DOI: 10.1016/S0032-3861(01)00175-6 |
0.417 |
|
1996 |
Pakdel P, Jana SC, Ottino JM. Application of boundary integral techniques to fluid tracking and mixing Chemical Engineering Communications. 148: 347-362. DOI: 10.1080/00986449608936524 |
0.506 |
|
1995 |
Souvaliotis A, Jana SC, Ottino JM. Potentialities and limitations of mixing simulations Aiche Journal. 41: 1605-1621. DOI: 10.1002/Aic.690410702 |
0.491 |
|
1994 |
Ottino JM, Jana SC, Chakravarthy VS. From Reynolds's stretching and folding to mixing studies using horseshoe maps Physics of Fluids. 6: 685-699. DOI: 10.1063/1.868308 |
0.513 |
|
1994 |
Jana SC, Metcalfe G, Ottino JM. Experimental and computational studies of mixing in complex stokes flows: The vortex mixing flow and multicellular cavity flows Journal of Fluid Mechanics. 269: 199-246. DOI: 10.1017/S0022112094001539 |
0.506 |
|
1994 |
Jana SC, Tjahjadi M, Ottino JM. Chaotic mixing of viscous fluids by periodic changes in geometry: Baffled cavity flow Aiche Journal. 40: 1769-1781. DOI: 10.1002/aic.690401102 |
0.436 |
|
1994 |
Jana SC, Tjahjadi M, Ottino JM. Chaotic mixing of viscous fluids by periodic changes in geometry: baffled cavity flow Aiche Journal. 40: 1769-1781. DOI: 10.1002/Aic.690401102 |
0.513 |
|
1992 |
Ottino JM, Muzzio FJ, Tjahjadi M, Franjione JG, Jana SC, Kusch HA. Chaos, symmetry, and self-similarity: exploiting order and disorder in mixing processes. Science (New York, N.Y.). 257: 754-60. PMID 17736462 DOI: 10.1126/Science.257.5071.754 |
0.612 |
|
Show low-probability matches. |