Year |
Citation |
Score |
2020 |
Bahmanzad A, Clouston PL, Arwade SR, Schreyer AC. Shear Properties of Eastern Hemlock with Respect to Fiber Orientation for Use in Cross Laminated Timber Journal of Materials in Civil Engineering. 32: 4020165. DOI: 10.1061/(Asce)Mt.1943-5533.0003232 |
0.31 |
|
2020 |
Brian K, Emma B, Arwade SR. The effects of ascent technique and the presence of leaves on loading of a tie-in point during climber ascents Urban Forestry & Urban Greening. 54: 126762. DOI: 10.1016/J.Ufug.2020.126762 |
0.329 |
|
2020 |
Kane B, Arwade SR. Quantifying tension and deflection in pre-tensioned speedlines carrying a load Urban Forestry & Urban Greening. 48: 126514. DOI: 10.1016/J.Ufug.2019.126514 |
0.327 |
|
2020 |
Qiao C, Myers AT, Arwade SR. Characteristics of hurricane-induced wind, wave, and storm surge maxima along the U.S. Atlantic coast Renewable Energy. 150: 712-721. DOI: 10.1016/J.Renene.2020.01.030 |
0.356 |
|
2019 |
Khoshbakht N, Clouston PL, Arwade SR, Schreyer AC. Evaluation of ASTM D5764 Dowel Connection Tests for Laminated Veneer Bamboo (LVB) Journal of Testing and Evaluation. 47: 20180385. DOI: 10.1520/Jte20180385 |
0.379 |
|
2019 |
Gusella F, Arwade SR, Orlando M, Peterman KD. Influence of mechanical and geometric uncertainty on rack connection structural response Journal of Constructional Steel Research. 153: 343-355. DOI: 10.1016/J.Jcsr.2018.10.021 |
0.378 |
|
2018 |
Chatterjee A, Arwade SR, Schafer BW, Moen CD. System Reliability of Floor Diaphragms Framed from Cold-Formed Steel with Wood Sheathing Journal of Structural Engineering-Asce. 144: 4017208. DOI: 10.1061/(Asce)St.1943-541X.0001958 |
0.303 |
|
2018 |
Khoshbakht N, Clouston PL, Arwade SR, Schreyer AC. Computational Modeling of Laminated Veneer Bamboo Dowel Connections Journal of Materials in Civil Engineering. 30: 4017285. DOI: 10.1061/(Asce)Mt.1943-5533.0002135 |
0.306 |
|
2018 |
Cetrangolo I, Arwade SR, Kane B. An investigation of branch stresses induced by arboricultural operations Urban Forestry & Urban Greening. 30: 124-131. DOI: 10.1016/J.Ufug.2018.01.004 |
0.336 |
|
2018 |
Hallowell ST, Myers AT, Arwade SR, Pang W, Rawal P, Hines EM, Hajjar JF, Qiao C, Valamanesh V, Wei K, Carswell W, Fontana CM. Hurricane risk assessment of offshore wind turbines Renewable Energy. 125: 234-249. DOI: 10.1016/J.Renene.2018.02.090 |
0.348 |
|
2018 |
Willis D, Niezrecki C, Kuchma D, Hines E, Arwade S, Barthelmie R, DiPaola M, Drane P, Hansen C, Inalpolat M, Mack J, Myers A, Rotea M. Wind energy research: State-of-the-art and future research directions Renewable Energy. 125: 133-154. DOI: 10.1016/J.Renene.2018.02.049 |
0.366 |
|
2018 |
Hallowell ST, Arwade SR, Fontana CM, DeGroot DJ, Aubeny CP, Diaz BD, Myers AT, Landon ME. System reliability of floating offshore wind farms with multiline anchors Ocean Engineering. 160: 94-104. DOI: 10.1016/J.Oceaneng.2018.04.046 |
0.363 |
|
2018 |
Song J, Sun Q, Luo S, Arwade SR, Gerasimidis S, Guo Y, Zhang G. Compression behavior of individual thin-walled metallic hollow spheres with patterned distributions of microporosity Materials Science and Engineering: A. 734: 453-475. DOI: 10.1016/J.Msea.2018.08.016 |
0.387 |
|
2017 |
Amini A, Arwade SR, Clouston PL. Modeling the Effect of Void Shapes on the Compressive Behavior of Parallel-Strand Lumber Journal of Materials in Civil Engineering. 29: 4017129. DOI: 10.1061/(Asce)Mt.1943-5533.0001980 |
0.54 |
|
2017 |
Song J, Sun Q, Yang Z, Luo S, Xiao X, Arwade SR, Zhang G. Effects of microporosity on the elasticity and yielding of thin-walled metallic hollow spheres Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 688: 134-145. DOI: 10.1016/J.Msea.2017.01.105 |
0.365 |
|
2017 |
Wei K, Myers AT, Arwade SR. Dynamic effects in the response of offshore wind turbines supported by jackets under wave loading Engineering Structures. 142: 36-45. DOI: 10.1016/J.Engstruct.2017.03.074 |
0.357 |
|
2017 |
Bian G, Chatterjee A, Buonopane SG, Arwade SR, Moen CD, Schafer BW. Reliability of cold-formed steel framed shear walls as impacted by variability in fastener response Engineering Structures. 142: 84-97. DOI: 10.1016/J.Engstruct.2017.03.072 |
0.363 |
|
2016 |
Wei K, Arwade SR, Myers AT, Hallowell S, Hajjar JF, Hines EM, Pang W. Toward performance-based evaluation for offshore wind turbine jacket support structures Renewable Energy. 97: 709-721. DOI: 10.1016/J.Renene.2016.06.028 |
0.398 |
|
2016 |
Carswell W, Arwade S, DeGroot D, Myers A. Natural frequency degradation and permanent accumulated rotation for offshore wind turbine monopiles in clay Renewable Energy. 97: 319-330. DOI: 10.1016/J.Renene.2016.05.080 |
0.381 |
|
2016 |
Smith BH, Arwade SR, Schafer BW, Moen CD. Design component and system reliability in a low-rise cold formed steel framed commercial building Engineering Structures. 127: 434-446. DOI: 10.1016/J.Engstruct.2016.08.049 |
0.405 |
|
2016 |
Wei K, Arwade SR, Myers AT, Valamanesh V. Directional effects on the reliability of non-axisymmetric support structures for offshore wind turbines under extreme wind and wave loadings Engineering Structures. 106: 68-79. DOI: 10.1016/J.Engstruct.2015.10.016 |
0.43 |
|
2016 |
Valamanesh V, Myers AT, Arwade SR, Hajjar JF, Hines E, Pang W. Wind-wave prediction equations for probabilistic offshore hurricane hazard analysis Natural Hazards. 83: 541-562. DOI: 10.1007/S11069-016-2331-Z |
0.344 |
|
2016 |
Wei K, Arwade SR, Myers AT, Valamanesh V, Pang W. Effect of wind and wave directionality on the structural performance of non-operational offshore wind turbines supported by jackets during hurricanes Wind Energy. DOI: 10.1002/We.2006 |
0.395 |
|
2015 |
Stewart GM, Lackner MA, Arwade SR, Hallowell S, Myers AT. Statistical estimation of extreme loads for the design of offshore wind turbines during non-operational conditions Wind Engineering. 39: 629-640. DOI: 10.1260/0309-524X.39.6.629 |
0.414 |
|
2015 |
Fontana CM, Carswell W, Arwade SR, DeGroot DJ, Myers AT. Sensitivity of the dynamic response of monopile-supported offshore wind turbines to structural and foundation damping Wind Engineering. 39: 609-627. DOI: 10.1260/0309-524X.39.6.609 |
0.407 |
|
2015 |
Amini A, Arwade SR, Clouston PL, Rattanaserikiat S. Characterization and probabilistic modeling of the mesostructure of parallel strand lumber Journal of Materials in Civil Engineering. 27. DOI: 10.1061/(Asce)Mt.1943-5533.0001116 |
0.566 |
|
2015 |
Valamanesh V, Myers AT, Arwade SR. Multivariate analysis of extreme metocean conditions for offshore wind turbines Structural Safety. 55: 60-69. DOI: 10.1016/J.Strusafe.2015.03.002 |
0.372 |
|
2015 |
Carswell W, Johansson J, Løvholt F, Arwade SR, Madshus C, DeGroot DJ, Myers AT. Foundation damping and the dynamics of offshore wind turbine monopiles Renewable Energy. 80: 724-736. DOI: 10.1016/J.Renene.2015.02.058 |
0.405 |
|
2015 |
Arwade SR, Deodatis G, Teferra K. Variability response functions for apparent material properties Probabilistic Engineering Mechanics. 44: 28-34. DOI: 10.1016/J.Probengmech.2015.10.010 |
0.324 |
|
2015 |
Myers AT, Arwade SR, Valamanesh V, Hallowell S, Carswell W. Strength, stiffness, resonance and the design of offshore wind turbine monopiles Engineering Structures. 100: 332-341. DOI: 10.1016/J.Engstruct.2015.06.021 |
0.358 |
|
2015 |
Hallowell S, Myers AT, Arwade SR. Variability of breaking wave characteristics and impact loads on offshore wind turbines supported by monopiles Wind Energy. DOI: 10.1002/We.1833 |
0.366 |
|
2015 |
Carswell W, Arwade SR, DeGroot DJ, Lackner MA. Soil-structure reliability of offshore wind turbine monopile foundations Wind Energy. 18: 483-498. DOI: 10.1002/We.1710 |
0.384 |
|
2014 |
Yang B(, Clouston PL, Arwade SR. Torsional Shear Strength and Size Effect in Laminated Veneer Lumber Advances in Civil Engineering Materials. 3: 20130108. DOI: 10.1520/Acem20130108 |
0.329 |
|
2014 |
Moradi M, Arwade SR. Improving buckling response of the square steel tube by using steel foam Structural Engineering and Mechanics. 51: 1017-1036. DOI: 10.12989/Sem.2014.51.6.1017 |
0.525 |
|
2014 |
Arwade SR, Gioffrè M. Validity of stationary probabilistic models for wind speed records ofvarying duration Renewable Energy. 69: 74-81. DOI: 10.1016/J.Renene.2014.03.016 |
0.375 |
|
2014 |
Ciftci C, Arwade SR, Kane B, Brena SF. Analysis of the probability of failure for open-grown trees during wind storms Probabilistic Engineering Mechanics. 37: 41-50. DOI: 10.1016/J.Probengmech.2014.04.002 |
0.353 |
|
2014 |
Szyniszewski ST, Smith BH, Hajjar JF, Schafer BW, Arwade SR. The mechanical properties and modeling of a sintered hollow sphere steel foam Materials and Design. 54: 1083-1094. DOI: 10.1016/J.Matdes.2013.08.045 |
0.357 |
|
2014 |
Wei K, Arwade SR, Myers AT. Incremental wind-wave analysis of the structural capacity of offshore wind turbine support structures under extreme loading Engineering Structures. 79: 58-69. DOI: 10.1016/J.Engstruct.2014.08.010 |
0.375 |
|
2014 |
Teferra K, Arwade SR, Deodatis G. Generalized variability response functions for two-dimensional elasticity problems Computer Methods in Applied Mechanics and Engineering. 272: 121-137. DOI: 10.1016/J.Cma.2014.01.013 |
0.336 |
|
2013 |
Krem M, Hoque ST, Arwade SR, Breña SF. Structural configuration and building energy performance Journal of Architectural Engineering. 19: 29-40. DOI: 10.1061/(Asce)Ae.1943-5568.0000103 |
0.559 |
|
2013 |
Moradi M, Arwade SR, Schafer BW. Computational evaluation of limit states of thin-walled channels made from steel foam Thin-Walled Structures. 62: 206-214. DOI: 10.1016/J.Tws.2012.07.007 |
0.531 |
|
2013 |
Ciftci C, Brena SF, Kane B, Arwade SR. The effect of crown architecture on dynamic amplification factor of an open-grown sugar maple (Acer saccharum L.) Trees - Structure and Function. 27: 1175-1189. DOI: 10.1007/S00468-013-0867-Z |
0.32 |
|
2013 |
Amini A, Arwade SR, Clouston PL. Stochastic characteristics and modeling of structural composite lumber Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of the 11th International Conference On Structural Safety and Reliability, Icossar 2013. 183-190. |
0.552 |
|
2013 |
Carswell W, Arwade SR, Myers AT, Hajjar JF. Reliability analysis of monopile offshore wind turbine support structures Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures - Proceedings of the 11th International Conference On Structural Safety and Reliability, Icossar 2013. 223-229. |
0.336 |
|
2012 |
Szyniszewski S, Smith BH, Hajjar JF, Arwade SR, Schafer BW. Local buckling strength of steel foam sandwich panels Thin-Walled Structures. 59: 11-19. DOI: 10.1016/J.Tws.2012.04.014 |
0.366 |
|
2012 |
Smith BH, Szyniszewski S, Hajjar JF, Schafer BW, Arwade SR. Corrigendum to “Steel foam for structures: A review of applications, manufacturing and material properties” [Journal of Constructional Steel Research 71 (2012) 1–10] Journal of Constructional Steel Research. 72: 276. DOI: 10.1016/J.Jcsr.2012.02.001 |
0.304 |
|
2012 |
Smith BH, Szyniszewski S, Hajjar JF, Schafer BW, Arwade SR. Steel foam for structures: A review of applications, manufacturing and material properties Journal of Constructional Steel Research. 71: 1-10. DOI: 10.1016/J.Jcsr.2011.10.028 |
0.398 |
|
2012 |
Mahdavi M, Clouston PL, Arwade SR. A low-technology approach toward fabrication of Laminated Bamboo Lumber Construction and Building Materials. 29: 257-262. DOI: 10.1016/J.Conbuildmat.2011.10.046 |
0.374 |
|
2012 |
Teferra K, Arwade SR, Deodatis G. Stochastic variability of effective properties via the generalized variability response function Computers and Structures. 110: 107-115. DOI: 10.1016/J.Compstruc.2012.07.005 |
0.352 |
|
2011 |
Arwade SR, Clouston PL, Krupka MT. Length effects in tensile strength in the orthogonal directions of structural composite lumber Journal of Testing and Evaluation. 39. DOI: 10.1520/Jte103261 |
0.348 |
|
2011 |
Arwade SR, Lackner MA, Grigoriu MD. Probabilistic models for wind turbine and wind farm performance Journal of Solar Energy Engineering, Transactions of the Asme. 133. DOI: 10.1115/1.4004273 |
0.567 |
|
2011 |
Pinto H, Arwade SR. Damage accumulation model for aluminium-closed cell foams subjected to fully reversed cyclic loading Fatigue and Fracture of Engineering Materials and Structures. 34: 1021-1034. DOI: 10.1111/J.1460-2695.2011.01591.X |
0.353 |
|
2011 |
Mahdavi M, Clouston PL, Arwade SR. Development of Laminated Bamboo Lumber: Review of Processing, Performance, and Economical Considerations Journal of Materials in Civil Engineering. 23: 1036-1042. DOI: 10.1061/(Asce)Mt.1943-5533.0000253 |
0.424 |
|
2011 |
Kelton SL, Arwade SR, Lutenegger AJ. Variability of the mechanical properties of wrought iron from historic American truss bridges Journal of Materials in Civil Engineering. 23: 638-647. DOI: 10.1061/(Asce)Mt.1943-5533.0000220 |
0.322 |
|
2011 |
Pinto H, Arwade S. Damage accumulation model for aluminum closed cell foams Procedia Engineering. 10: 1967-1972. DOI: 10.1016/J.Proeng.2011.04.326 |
0.356 |
|
2011 |
Arwade SR, Deodatis G. Variability response functions for effective material properties Probabilistic Engineering Mechanics. 26: 174-181. DOI: 10.1016/J.Probengmech.2010.11.005 |
0.367 |
|
2010 |
Arwade SR, Winans R, Clouston PL. Variability of the compressive strength of parallel strand lumber Journal of Engineering Mechanics. 136: 405-412. DOI: 10.1061/(Asce)Em.1943-7889.0000079 |
0.344 |
|
2010 |
Arwade SR, Moradi M, Louhghalam A. Variance decomposition and global sensitivity for structural systems Engineering Structures. 32: 1-10. DOI: 10.1016/J.Engstruct.2009.08.011 |
0.55 |
|
2009 |
Arwade SR, Clouston PL, Winans R. Measurement and stochastic computational modeling of the elastic properties of parallel strand lumber Journal of Engineering Mechanics. 135: 897-905. DOI: 10.1061/(Asce)Em.1943-7889.0000020 |
0.346 |
|
2008 |
Tan L, Arwade SR. Response classification of simple polycrystalline microstructures Computer Methods in Applied Mechanics and Engineering. 197: 1397-1409. DOI: 10.1016/J.Cma.2007.11.011 |
0.313 |
|
2007 |
Liu L, Arwade SR, Igusa T. Random composites characterization using a classifier model Journal of Engineering Mechanics. 133: 129-140. DOI: 10.1061/(Asce)0733-9399(2007)133:2(129) |
0.312 |
|
2006 |
Graham-Brady LL, Arwade SR, Corr DJ, Gutiérrez MA, Breysse D, Grigoriu M, Zabaras N. Probability and Materials: from Nano- to Macro-Scale: A summary Probabilistic Engineering Mechanics. 21: 193-199. DOI: 10.1016/J.Probengmech.2005.10.005 |
0.54 |
|
2004 |
Arwade SR, Grigoriu M. Probabilistic Model for Polycrystalline Microstructures with Application to Intergranular Fracture Journal of Engineering Mechanics. 130: 997-1005. DOI: 10.1061/(Asce)0733-9399(2004)130:9(997) |
0.514 |
|
2003 |
Arwade SR, Grigoriu M. Evolution of crystallographic orientations in crystals subject to random and deterministic deformation Probabilistic Engineering Mechanics. 18: 289-299. DOI: 10.1016/S0266-8920(03)00032-8 |
0.498 |
|
2003 |
Grigoriu M, Ditlevsen O, Arwade SR. A Monte Carlo simulation model for stationary non-Gaussian processes Probabilistic Engineering Mechanics. 18: 87-95. DOI: 10.1016/S0266-8920(02)00052-8 |
0.484 |
|
2000 |
Arwade SR, Grigoriu M. The material state simulator: A prototype 41st Structures, Structural Dynamics, and Materials Conference and Exhibit. |
0.486 |
|
1999 |
Myers CR, Arwade SR, Iesulauro E, Wawrzynek PA, Grigoriu M, Ingraffea AR, Dawson PR, Miller MP, Sethna JP. Digital material: a framework for multiscale modeling of defects in solids Materials Research Society Symposium - Proceedings. 538: 509-514. DOI: 10.1557/Proc-538-509 |
0.548 |
|
Show low-probability matches. |