Year |
Citation |
Score |
2020 |
Roy D, Chakraborty S, Gupta AK, BasuMallick A, Scattergood RO, Koch CC. Synergistic effect of Nb and Zr additions on the structure-property relationships of nanocrystalline Cu processed by mechanical alloying and hot pressing Journal of Alloys and Compounds. 157174. DOI: 10.1016/J.Jallcom.2020.157174 |
0.478 |
|
2020 |
Wang Y, Huang C, Li Y, Guo F, He Q, Wang M, Wu X, Scattergood RO, Zhu Y. Dense dispersed shear bands in gradient-structured Ni International Journal of Plasticity. 124: 186-198. DOI: 10.1016/J.Ijplas.2019.08.012 |
0.338 |
|
2019 |
Wang YF, Wang MS, Fang XT, Guo FJ, Liu HQ, Scattergood RO, Huang CX, Zhu YT. Extra strengthening in a coarse/ultrafine grained laminate: Role of gradient interfaces International Journal of Plasticity. 123: 196-207. DOI: 10.1016/J.Ijplas.2019.07.019 |
0.353 |
|
2019 |
Abaza MA, Al‐Sulaiti L, Scattergood RO, Youssef KM. Influence of 1%Nb Solute Addition on the Thermal Stability of In Situ Consolidated Nanocrystalline Cu Advanced Engineering Materials. 21: 1800859. DOI: 10.1002/Adem.201800859 |
0.314 |
|
2018 |
Youssef KM, Abaza MA, Scattergood RO, Koch CC. High strength, ductility, and electrical conductivity of in-situ consolidated nanocrystalline Cu-1%Nb Materials Science and Engineering: A. 711: 350-355. DOI: 10.1016/J.Msea.2017.11.060 |
0.486 |
|
2017 |
Shahbeigi Roodposhti P, Saber M, Koch C, Scattergood R, Shahbazmohamadi S. Effect of oxygen content on thermal stability of grain size for nanocrystalline Fe10Cr and Fe14Cr4Hf alloy powders Journal of Alloys and Compounds. 720: 510-520. DOI: 10.1016/J.Jallcom.2017.05.261 |
0.489 |
|
2017 |
Sikdar K, Chakravarty S, Roy D, Scattergood RO, Koch CC. Synthesis and characterization of an in situ consolidated nanocrystalline Cu88Al11.5Y0.5 alloy Journal of Alloys and Compounds. 717: 219-225. DOI: 10.1016/J.Jallcom.2017.05.092 |
0.48 |
|
2016 |
Roodposhti PS, Sarkar A, Murty KL, Brody H, Scattergood R. Grain boundary sliding mechanism during high temperature deformation of AZ31 Magnesium alloy Materials Science and Engineering A. 669: 171-177. DOI: 10.1016/J.Msea.2016.05.076 |
0.45 |
|
2016 |
Mahesh BV, Singh Raman RK, Scattergood RO, Koch CC. Retraction notice to Fe-Cr-Ni-Zr alloys with bi-modal grain size distribution: Synthesis, mechanical properties and oxidation resistance [Mater. Sci. Eng. A, 574, (2013), 235-242] DOI: 10.1007/s10853-012-6686-6 Materials Science and Engineering A. 660: 251. DOI: 10.1016/J.Msea.2016.03.003 |
0.414 |
|
2016 |
Xu W, Li L, Valdez JA, Saber M, Zhu Y, Koch CC, Scattergood RO. Effect of nano-oxide particle size on radiation resistance of iron-chromium alloys Journal of Nuclear Materials. 469: 72-81. DOI: 10.1016/J.Jnucmat.2015.11.044 |
0.373 |
|
2016 |
Shahbeigi Roodposhti P, Sarkar A, Murty KL, Scattergood RO. Effects of Microstructure and Processing Methods on Creep Behavior of AZ91 Magnesium Alloy Journal of Materials Engineering and Performance. 25: 3697-3709. DOI: 10.1007/S11665-016-2222-1 |
0.446 |
|
2015 |
Saber M, Koch CC, Scattergood RO. Thermodynamic Grain Size Stabilization Models: An Overview Materials Research Letters. 3: 65-75. DOI: 10.1080/21663831.2014.997894 |
0.433 |
|
2015 |
Li L, Xu W, Saber M, Zhu Y, Koch CC, Scattergood RO. Long-term stability of 14YT-4Sc alloy at high temperature Materials Science and Engineering A. 647: 222-228. DOI: 10.1016/J.Msea.2015.09.012 |
0.455 |
|
2015 |
Li L, Xu W, Saber M, Zhu Y, Koch CC, Scattergood RO. Influence of scandium addition on the high-temperature grain size stabilization of oxide-dispersion-strengthened (ODS) ferritic alloy Materials Science and Engineering A. 636: 565-571. DOI: 10.1016/J.Msea.2015.03.117 |
0.492 |
|
2015 |
Zaddach AJ, Scattergood RO, Koch CC. Tensile properties of low-stacking fault energy high-entropy alloys Materials Science and Engineering A. 636: 373-378. DOI: 10.1016/J.Msea.2015.03.109 |
0.454 |
|
2015 |
Mula S, Setman D, Youssef K, Scattergood RO, Koch CC. Structural evolution of Cu(1-X)YX alloys prepared by mechanical alloying: Their thermal stability and mechanical properties Journal of Alloys and Compounds. 627: 108-116. DOI: 10.1016/J.Jallcom.2014.12.114 |
0.483 |
|
2015 |
Roodposhti PS, Sarkar A, Murty KL, Scattergood RO. Dislocation Density Evolution During Creep of AZ31 Mg Alloy: A Study by X-ray Diffraction Line Profile Analysis Metallography, Microstructure, and Analysis. 4: 337-343. DOI: 10.1007/S13632-015-0220-6 |
0.359 |
|
2015 |
Xu W, Li L, Saber M, Koch CC, Zhu Y, Scattergood RO. Microstructures and Stabilization Mechanisms of Nanocrystalline Iron-Chromium Alloys with Hafnium Addition Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 4394-4404. DOI: 10.1007/S11661-015-2985-2 |
0.405 |
|
2014 |
Li L, Saber M, Xu W, Zhu Y, Koch CC, Scattergood RO. High-temperature grain size stabilization of nanocrystalline Fe-Cr alloys with Hf additions Materials Science and Engineering A. 613: 289-295. DOI: 10.1016/J.Msea.2014.06.099 |
0.479 |
|
2014 |
Roy D, Mahesh BV, Atwater MA, Chan TE, Scattergood RO, Koch CC. Grain size stability and hardness in nanocrystalline Cu-Al-Zr and Cu-Al-Y alloys Materials Science and Engineering A. 598: 217-223. DOI: 10.1016/J.Msea.2013.11.075 |
0.454 |
|
2014 |
Xu WZ, Li LL, Saber M, Koch CC, Zhu YT, Scattergood RO. Nano ZrO2 particles in nanocrystalline Fe-14Cr-1.5Zr alloy powders Journal of Nuclear Materials. 452: 434-439. DOI: 10.1016/J.Jnucmat.2014.05.067 |
0.448 |
|
2014 |
Saber M, Xu W, Li L, Zhu Y, Koch CC, Scattergood RO. Size effect of primary Y2O3 additions on the characteristics of the nanostructured ferritic ODS alloys: Comparing as-milled and as-milled/annealed alloys using S/TEM Journal of Nuclear Materials. 452: 223-229. DOI: 10.1016/J.Jnucmat.2014.05.014 |
0.465 |
|
2014 |
Kotan H, Darling KA, Scattergood RO, Koch CC. Influence of Zr and nano-Y2O3 additions on thermal stability and improved hardness in mechanically alloyed Fe base ferritic alloys Journal of Alloys and Compounds. 615: 1013-1018. DOI: 10.1016/J.Jallcom.2014.07.054 |
0.458 |
|
2014 |
Khoshkhoo MS, Scudino S, Bednarcik J, Kauffmann A, Bahmanpour H, Freudenberger J, Scattergood R, Zehetbauer MJ, Koch CC, Eckert J. Mechanism of nanostructure formation in ball-milled Cu and Cu-3wt%Zn studied by X-ray diffraction line profile analysis Journal of Alloys and Compounds. 588: 138-143. DOI: 10.1016/J.Jallcom.2013.10.252 |
0.362 |
|
2014 |
Varam S, Rajulapati KV, Bhanu Sankara Rao K, Scattergood RO, Murty KL, Koch CC. Loading rate-dependent mechanical properties of bulk two-phase nanocrystalline Al-Pb alloys studied by nanoindentation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 5249-5258. DOI: 10.1007/S11661-014-2425-8 |
0.475 |
|
2013 |
Chan RN, Stoner BR, Thompson JY, Scattergood RO, Piascik JR. Fracture toughness improvements of dental ceramic through use of yttria-stabilized zirconia (YSZ) thin-film coatings. Dental Materials : Official Publication of the Academy of Dental Materials. 29: 881-7. PMID 23764025 DOI: 10.1016/J.Dental.2013.05.003 |
0.646 |
|
2013 |
Koch CC, Scattergood RO, Kotan H, Saber M. Thermal stability of nanocrystalline grain size in ternary Fe-base alloys Materials Science Forum. 753: 341-344. DOI: 10.4028/Www.Scientific.Net/Msf.753.341 |
0.43 |
|
2013 |
Darling KA, Kecskes LJ, Atwater M, Semones J, Scattergood RO, Koch CC. Thermal stability of nanocrystalline nickel with yttrium additions Journal of Materials Research. 28: 1813-1819. DOI: 10.1557/Jmr.2013.9 |
0.492 |
|
2013 |
Koch CC, Scattergood RO, Saber M, Kotan H. High temperature stabilization of nanocrystalline grain size: Thermodynamic versus kinetic strategies Journal of Materials Research. 28: 1785-1791. DOI: 10.1557/Jmr.2012.429 |
0.418 |
|
2013 |
Saber M, Kotan H, Koch CC, Scattergood RO. A predictive model for thermodynamic stability of grain size in nanocrystalline ternary alloys Journal of Applied Physics. 114. DOI: 10.1063/1.4821040 |
0.421 |
|
2013 |
Saber M, Kotan H, Koch CC, Scattergood RO. Thermodynamic stabilization of nanocrystalline binary alloys Journal of Applied Physics. 113. DOI: 10.1063/1.4791704 |
0.414 |
|
2013 |
Lane BM, Dow TA, Scattergood R. Thermo-chemical wear model and worn tool shapes for single-crystal diamond tools cutting steel Wear. 300: 216-224. DOI: 10.1016/J.Wear.2013.02.012 |
0.31 |
|
2013 |
Zdanowicz E, Dow TA, Scattergood RO, Youssef K. Nanostructure fabrication on germanium and silicon by nanocoining imprint technique Precision Engineering. 37: 871-879. DOI: 10.1016/J.Precisioneng.2013.05.004 |
0.327 |
|
2013 |
Mahesh BV, Singh Raman RK, Scattergood RO, Koch CC. Fe-Cr-Ni-Zr alloys with bi-modal grain size distribution: Synthesis, mechanical properties and oxidation resistance Materials Science and Engineering A. 574: 235-242. DOI: 10.1016/J.Msea.2013.02.049 |
0.43 |
|
2013 |
Atwater MA, Scattergood RO, Koch CC. The stabilization of nanocrystalline copper by zirconium Materials Science and Engineering A. 559: 250-256. DOI: 10.1016/J.Msea.2012.08.092 |
0.478 |
|
2013 |
Setman D, Kerber M, Bahmanpour H, Horky J, Scattergood RO, Koch CC, Zehetbauer MJ. Nature and density of lattice defects in ball milled nanostructured copper Mechanics of Materials. 67: 59-64. DOI: 10.1016/J.Mechmat.2013.07.007 |
0.348 |
|
2013 |
Tao JM, Zhu XK, Scattergood RO, Koch CC. The thermal stability of high-energy ball-milled nanostructured Cu Materials and Design. 50: 22-26. DOI: 10.1016/J.Matdes.2013.02.083 |
0.414 |
|
2013 |
Roy D, Atwater MA, Youssef K, Ledford JC, Scattergood RO, Koch CC. Studies on thermal stability, mechanical and electrical properties of nano crystalline Cu99.5Zr0.5 alloy Journal of Alloys and Compounds. 558: 44-49. DOI: 10.1016/J.Jallcom.2012.11.004 |
0.464 |
|
2013 |
Kotan H, Darling KA, Saber M, Koch CC, Scattergood RO. Effect of zirconium on grain growth and mechanical properties of a ball-milled nanocrystalline FeNi alloy Journal of Alloys and Compounds. 551: 621-629. DOI: 10.1016/J.Jallcom.2012.10.179 |
0.488 |
|
2013 |
Atwater MA, Mula S, Scattergood RO, Koch CC. Thermal stability of nanocrystalline copper alloyed with antimony Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 5611-5616. DOI: 10.1007/S11661-013-1891-8 |
0.423 |
|
2013 |
Kotan H, Darling KA, Saber M, Scattergood RO, Koch CC. Thermal stability and mechanical properties of nanocrystalline Fe-Ni-Zr alloys prepared by mechanical alloying Journal of Materials Science. 48: 8402-8411. DOI: 10.1007/S10853-013-7652-7 |
0.513 |
|
2013 |
Atwater MA, Bahmanpour H, Scattergood RO, Koch CC. The thermal stability of nanocrystalline cartridge brass and the effect of zirconium additions Journal of Materials Science. 48: 220-226. DOI: 10.1007/S10853-012-6731-5 |
0.485 |
|
2012 |
Koch CC, Scattergood RO, VanLeeuwen BK, Darling KA. Thermodynamic stabilization of grain size in nanocrystalline metals Materials Science Forum. 715: 323-328. DOI: 10.4028/Www.Scientific.Net/Msf.715-716.323 |
0.452 |
|
2012 |
Atwater MA, Roy D, Darling KA, Butler BG, Scattergood RO, Koch CC. The thermal stability of nanocrystalline copper cryogenically milled with tungsten Materials Science and Engineering A. 558: 226-233. DOI: 10.1016/J.Msea.2012.07.117 |
0.41 |
|
2012 |
Saber M, Kotan H, Koch CC, Scattergood RO. Thermal stability of nanocrystalline Fe-Cr alloys with Zr additions Materials Science and Engineering A. 556: 664-670. DOI: 10.1016/J.Msea.2012.07.045 |
0.477 |
|
2012 |
Roy D, Mitra R, Ojo O, Singh S, Kolesnikov D, Lojkowski W, Scattergood R, Koch C, Manna I. Evaluation of mechanical properties of partially amorphous and nanocrystalline Al50Ti40Si10 composites prepared by mechanical alloying and hot isostatic pressing Materials Science and Engineering: A. 555: 21-27. DOI: 10.1016/J.Msea.2012.06.028 |
0.459 |
|
2012 |
Kotan H, Saber M, Koch CC, Scattergood RO. Effect of annealing on microstructure, grain growth, and hardness of nanocrystalline Fe-Ni alloys prepared by mechanical alloying Materials Science and Engineering A. 552: 310-315. DOI: 10.1016/J.Msea.2012.05.045 |
0.456 |
|
2012 |
Mula S, Bahmanpour H, Mal S, Kang PC, Atwater M, Jian W, Scattergood RO, Koch CC. Thermodynamic feasibility of solid solubility extension of Nb in Cu and their thermal stability Materials Science and Engineering A. 539: 330-336. DOI: 10.1016/J.Msea.2012.01.104 |
0.44 |
|
2012 |
Bahmanpour H, Youssef KM, Horky J, Setman D, Atwater MA, Zehetbauer MJ, Scattergood RO, Koch CC. Deformation twins and related softening behavior in nanocrystalline Cu-30% Zn alloy Acta Materialia. 60: 3340-3349. DOI: 10.1016/J.Actamat.2012.02.036 |
0.43 |
|
2012 |
Kotan H, Darling KA, Saber M, Scattergood RO, Koch CC. An in situ experimental study of grain growth in a nanocrystalline Fe 91Ni 8Zr 1 alloy Journal of Materials Science. 1-7. DOI: 10.1007/S10853-012-7002-1 |
0.445 |
|
2012 |
Gupta RK, Darling KS, Raman RKS, Ravi KR, Koch CC, Murty BS, Scattergood RO. Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy Journal of Materials Science. 47: 1562-1566. DOI: 10.1007/S10853-011-5986-6 |
0.454 |
|
2011 |
Bahmanpour H, Kauffmann A, Khoshkhoo MS, Youssef KM, Mula S, Freudenberger J, Eckert J, Scattergood RO, Koch CC. Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys Materials Science and Engineering A. 529: 230-236. DOI: 10.1016/J.Msea.2011.09.022 |
0.437 |
|
2011 |
Darling KA, VanLeeuwen BK, Semones JE, Koch CC, Scattergood RO, Kecskes LJ, Mathaudhu SN. Stabilized nanocrystalline iron-based alloys: Guiding efforts in alloy selection Materials Science and Engineering A. 528: 4365-4371. DOI: 10.1016/J.Msea.2011.02.080 |
0.401 |
|
2011 |
VanLeeuwen BK, Darling KA, Koch CC, Scattergood RO. Novel technique for the synthesis of ultra-fine porosity metal foam via the inclusion of condensed argon through cryogenic mechanical alloying Materials Science and Engineering A. 528: 2192-2195. DOI: 10.1016/J.Msea.2010.11.057 |
0.409 |
|
2011 |
Kauffmann A, Freudenberger J, Geissler D, Yin S, Schillinger W, Sarma VS, Bahmanpour H, Scattergood R, Khoshkhoo MS, Wendrock H, Koch CC, Eckert J, Schultz L. Severe deformation twinning in pure copper by cryogenic wire drawing Acta Materialia. 59: 7816-7823. DOI: 10.1016/J.Actamat.2011.08.042 |
0.4 |
|
2011 |
Purohit Y, Sun L, Shenderova O, Scattergood RO, Brenner DW. First-principles-based mesoscale modeling of the solute-induced stabilization of 〈1 0 0〉 tilt grain boundaries in an Al-Pb alloy Acta Materialia. 59: 7022-7028. DOI: 10.1016/J.Actamat.2011.07.056 |
0.373 |
|
2011 |
Youssef K, Sakaliyska M, Bahmanpour H, Scattergood R, Koch C. Effect of stacking fault energy on mechanical behavior of bulk nanocrystalline Cu and Cu alloys Acta Materialia. 59: 5758-5764. DOI: 10.1016/J.Actamat.2011.05.052 |
0.428 |
|
2011 |
Bahmanpour H, Youssef KM, Scattergood RO, Koch CC. Mechanical behavior of bulk nanocrystalline copper alloys produced by high energy ball milling Journal of Materials Science. 46: 6316-6322. DOI: 10.1007/S10853-011-5312-3 |
0.482 |
|
2010 |
Tao JM, Zhu XK, Wong PZ, Scattergood RO, Koch CC. Mechanical properties of nanocrystalline Cu and Cu-Zn using tensile and shear punch tests Materials Science Forum. 633: 373-382. DOI: 10.4028/Www.Scientific.Net/Msf.633-634.373 |
0.402 |
|
2010 |
Tao JM, Zhu XK, Wong PZ, Scattergood RO, Koch CC. The thermal stability of nanocrystalline Cu prepared by high energy ball milling Inec 2010 - 2010 3rd International Nanoelectronics Conference, Proceedings. 957-958. DOI: 10.1109/INEC.2010.5425101 |
0.348 |
|
2010 |
Lane BM, Shi M, Dow TA, Scattergood R. Diamond tool wear when machining Al6061 and 1215 steel Wear. 268: 1434-1441. DOI: 10.1016/J.Wear.2010.02.019 |
0.335 |
|
2010 |
Gobien JM, Murty KL, Scattergood RO, Goodwin F, Koch CC. Creep behavior of ultra-fine grained Zn-4.5Al Materials Science and Engineering A. 527: 7382-7386. DOI: 10.1016/J.Msea.2010.08.020 |
0.451 |
|
2010 |
Gollapudi S, Rajulapati KV, Charit I, Koch CC, Scattergood RO, Murty KL. Creep in nanocrystalline materials: Role of stress assisted grain growth Materials Science and Engineering A. 527: 5773-5781. DOI: 10.1016/J.Msea.2010.05.048 |
0.39 |
|
2010 |
Darling KA, VanLeeuwen BK, Koch CC, Scattergood RO. Thermal stability of nanocrystalline Fe-Zr alloys Materials Science and Engineering A. 527: 3572-3580. DOI: 10.1016/J.Msea.2010.02.043 |
0.476 |
|
2010 |
Purohit Y, Sun L, Irving DL, Scattergood RO, Brenner DW. Computational study of the impurity induced reduction of grain boundary energies in nano- and bi-crystalline Al-Pb alloys Materials Science and Engineering A. 527: 1769-1775. DOI: 10.1016/J.Msea.2009.11.034 |
0.424 |
|
2010 |
VanLeeuwen BK, Darling KA, Koch CC, Scattergood RO, Butler BG. Thermal stability of nanocrystalline Pd81Zr19 Acta Materialia. 58: 4292-4297. DOI: 10.1016/J.Actamat.2010.04.023 |
0.471 |
|
2010 |
Gollapudi S, Rajulapati KV, Charit I, Youssef KM, Koch CC, Scattergood RO, Murty KL. Understanding creep in nanocrystalline materials Transactions of the Indian Institute of Metals. 63: 373-378. DOI: 10.1007/S12666-010-0050-9 |
0.373 |
|
2010 |
Koch CC, Scattergood RO, Youssef KM, Chan E, Zhu YT. Nanostructured materials by mechanical alloying: New results on property enhancement Journal of Materials Science. 45: 4725-4732. DOI: 10.1007/S10853-010-4252-7 |
0.494 |
|
2009 |
Gobien JM, Scattergood RO, Goodwin FE, Koch CC. Mechanical behavior of bulk ultra-fine-grained Zn-Al die-casting alloys Materials Science and Engineering A. 518: 84-88. DOI: 10.1016/J.Msea.2009.04.023 |
0.485 |
|
2009 |
Zhang DL, Koch CC, Scattergood RO. The role of new particle surfaces in synthesizing bulk nanostructured metallic materials by powder metallurgy Materials Science and Engineering A. 516: 270-275. DOI: 10.1016/J.Msea.2009.03.024 |
0.36 |
|
2008 |
Darling KA, Lewis Reynolds C, Leonard DN, Duscher G, Scattergood RO, Koch CC. Self-assembled three-dimensional Cu-Ge nanoweb composite. Nanotechnology. 19: 135603. PMID 19636152 DOI: 10.1088/0957-4484/19/13/135603 |
0.339 |
|
2008 |
Koch CC, Youssef KM, Scattergood RO. Mechanical properties of nanocrystailine materials produced by in situ consolidation ball milling Materials Science Forum. 579: 15-28. DOI: 10.4028/Www.Scientific.Net/Msf.579.15 |
0.431 |
|
2008 |
Koch CC, Youssef KM, Scattergood RO. Mechanical Properties of Nanocrystalline Materials Produced by In Situ Consolidation Ball Milling Materials Science Forum. 579: 15-28. DOI: 10.4028/www.scientific.net/MSF.579.15 |
0.325 |
|
2008 |
Darling KA, Chan RN, Wong PZ, Semones JE, Scattergood RO, Koch CC. Grain-size stabilization in nanocrystalline FeZr alloys Scripta Materialia. 59: 530-533. DOI: 10.1016/J.Scriptamat.2008.04.045 |
0.728 |
|
2008 |
Jang S, Purohit Y, Irving D, Padgett C, Brenner D, Scattergood RO. Molecular dynamics simulations of deformation in nanocrystalline Al-Pb alloys Materials Science and Engineering A. 493: 53-57. DOI: 10.1016/J.Msea.2007.05.130 |
0.443 |
|
2008 |
Purohit Y, Jang S, Irving DL, Padgett CW, Scattergood RO, Brenner DW. Atomistic modeling of the segregation of lead impurities to a grain boundary in an aluminum bicrystalline solid Materials Science and Engineering A. 493: 97-100. DOI: 10.1016/J.Msea.2007.05.128 |
0.409 |
|
2008 |
Scattergood RO, Koch CC, Murty KL, Brenner D. Strengthening mechanisms in nanocrystalline alloys Materials Science and Engineering A. 493: 3-11. DOI: 10.1016/J.Msea.2007.04.132 |
0.473 |
|
2008 |
Darling KA, Guduru RK, Reynolds CL, Bhosle VM, Chan RN, Scattergood RO, Koch CC, Narayan J, Aboelfotoh MO. Thermal stability, mechanical and electrical properties of nanocrystalline Cu3Ge Intermetallics. 16: 378-383. DOI: 10.1016/J.Intermet.2007.11.005 |
0.731 |
|
2008 |
Jang S, Purohit Y, Irving DL, Padgett C, Brenner D, Scattergood RO. Influence of Pb segregation on the deformation of nanocrystalline Al: Insights from molecular simulations Acta Materialia. 56: 4750-4761. DOI: 10.1016/J.Actamat.2008.05.024 |
0.426 |
|
2008 |
Rajulapati KV, Scattergood RO, Murty KL, Horita Z, Langdon TG, Koch CC. Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 2528-2534. DOI: 10.1007/S11661-008-9593-3 |
0.441 |
|
2008 |
Koch CC, Scattergood RO, Darling KA, Semones JE. Stabilization of nanocrystalline grain sizes by solute additions Journal of Materials Science. 43: 7264-7272. DOI: 10.1007/S10853-008-2870-0 |
0.447 |
|
2007 |
Purohit Y, Irving DL, Scattergood RO, Brenner DW. Prediction of Energies of <100> Tilt Boundaries in Al-Pb Alloy Mrs Proceedings. 1056. DOI: 10.1557/Proc-1056-Hh01-10 |
0.373 |
|
2007 |
Guduru RK, Murty KL, Youssef KM, Scattergood RO, Koch CC. Mechanical behavior of nanocrystalline copper Materials Science and Engineering A. 463: 14-21. DOI: 10.1016/J.Msea.2006.07.165 |
0.39 |
|
2007 |
Koch CC, Scattergood RO, Murty KL. The mechanical behavior of multiphase nanocrystalline materials Jom. 59: 66-70. DOI: 10.1007/S11837-007-0042-3 |
0.337 |
|
2007 |
Guduru RK, Darling KA, Scattergood RO, Koch CC, Murty KL. Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests Journal of Materials Science. 42: 5581-5588. DOI: 10.1007/S10853-006-1095-3 |
0.428 |
|
2007 |
Guduru RK, Wong PZ, Darling KA, Koch CC, Murty KL, Scattergood RO. Determination of activation volume in noncrystalline Cu using the shear punch test Advanced Engineering Materials. 9: 855-859. DOI: 10.1002/Adem.200700181 |
0.422 |
|
2007 |
Guduru RK, Nagasekhar AV, Scattergood RO, Koch CC, Murty KL. Thickness and clearance effects in shear punch testing Advanced Engineering Materials. 9: 157-160. DOI: 10.1002/Adem.200600255 |
0.32 |
|
2006 |
Rajulapati KV, Scattergood RO, Murty KL, Duscher G, Koch CC. Effect of Pb on the mechanical properties of nanocrystalline Al Scripta Materialia. 55: 155-158. DOI: 10.1016/J.Scriptamat.2006.03.051 |
0.362 |
|
2006 |
Guduru RK, Scattergood RO, Koch CC, Murty KL, Guruswamy S, McCarter MK. Mechanical properties of nanocrystalline Fe-Pb and Fe-Al2O 3 Scripta Materialia. 54: 1879-1883. DOI: 10.1016/J.Scriptamat.2006.02.014 |
0.349 |
|
2006 |
Youssef KM, Scattergood RO, Murty KL, Koch CC. Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility Scripta Materialia. 54: 251-256. DOI: 10.1016/J.Scriptamat.2005.09.028 |
0.443 |
|
2006 |
Guduru RK, Darling KA, Scattergood RO, Koch CC, Murty KL, Bakkal M, Shih AJ. Shear punch tests for a bulk metallic glass Intermetallics. 14: 1411-1416. DOI: 10.1016/J.Intermet.2006.01.052 |
0.355 |
|
2005 |
Murty KL, Kishore R, Yan J, Scattergood RO, Helsel AW. Effect of annealing temperature on texture and creep anisotropy in Ti3Al2.5V alloy Materials Science Forum. 495: 1645-1650. DOI: 10.4028/Www.Scientific.Net/Msf.495-497.1645 |
0.414 |
|
2005 |
Zhang DL, Koch CC, Scattergood RO, Youssef K. Bulk nanostructured cu-2.5vol.%Al2o3 alloy synthesized using high energy mechanical milling Journal of Metastable and Nanocrystalline Materials. 24: 639-642. DOI: 10.4028/Www.Scientific.Net/Jmnm.24-25.639 |
0.473 |
|
2005 |
Youssef KM, Scattergood RO, Murty KL, Horton JA, Koch CC. Ultrahigh strength and high ductility of bulk nanocrystalline copper Applied Physics Letters. 87. DOI: 10.1063/1.2034122 |
0.421 |
|
2005 |
Trichy GR, Scattergood RO, Koch CC, Murty KL. Ball indentation tests for a Zr-based bulk metallic glass Scripta Materialia. 53: 1461-1465. DOI: 10.1016/J.Scriptamat.2005.08.010 |
0.338 |
|
2005 |
Zhang DL, Raynova S, Koch CC, Scattergood RO, Youssef KM. Consolidation of a Cu-2.5 vol.% Al2O3 powder using high energy mechanical milling Materials Science and Engineering A. 410: 375-380. DOI: 10.1016/J.Msea.2005.08.109 |
0.455 |
|
2005 |
Guduru RK, Darling KA, Kishore R, Scattergood RO, Koch CC, Murty KL. Evaluation of mechanical properties using shear-punch testing Materials Science and Engineering A. 395: 307-314. DOI: 10.1016/J.Msea.2004.12.048 |
0.392 |
|
2005 |
Qu J, Shih AJ, Scattergood RO, Luo J. Abrasive micro-blasting to improve surface integrity of electrical discharge machined WC-Co composite Journal of Materials Processing Technology. 166: 440-448. DOI: 10.1016/J.Jmatprotec.2004.09.075 |
0.319 |
|
2005 |
Bakkal M, Shih AJ, McSpadden SB, Scattergood RO. Thrust force, torque, and tool wear in drilling the bulk metallic glass International Journal of Machine Tools and Manufacture. 45: 863-872. DOI: 10.1016/J.Ijmachtools.2004.11.005 |
0.306 |
|
2005 |
Bakkal M, Shih AJ, McSpadden SB, Liu CT, Scattergood RO. Light emission, chip morphology, and burr formation in drilling the bulk metallic glass International Journal of Machine Tools and Manufacture. 45: 741-752. DOI: 10.1016/J.Ijmachtools.2004.11.004 |
0.355 |
|
2005 |
Koch CC, Youssef KM, Scattergood RO, Murty KL. Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys Advanced Engineering Materials. 7: 787-794. DOI: 10.1002/Adem.200500094 |
0.443 |
|
2004 |
Youssef KM, Scattergood RO, Murty KL, Koch CC. Ultratough nanocrystalline copper with a narrow grain size distribution Applied Physics Letters. 85: 929-931. DOI: 10.1063/1.1779342 |
0.423 |
|
2004 |
Bakkal M, Shih AJ, Scattergood RO, Liu CT. Machining of a Zr-Ti-Al-Cu-Ni metallic glass Scripta Materialia. 50: 583-588. DOI: 10.1016/J.Scriptamat.2003.11.052 |
0.381 |
|
2004 |
Bakkal M, Liu CT, Watkins TR, Scattergood RO, Shih AJ. Oxidation and crystallization of Zr-based bulk metallic glass due to machining Intermetallics. 12: 195-204. DOI: 10.1016/J.Intermet.2003.09.017 |
0.301 |
|
2004 |
Bakkal M, Shih AJ, Scattergood RO. Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass International Journal of Machine Tools and Manufacture. 44: 915-925. DOI: 10.1016/J.Ijmachtools.2004.02.002 |
0.313 |
|
2004 |
Guduru RK, Darling KA, Kishore R, Scattergood RO, Koch CC, Murty KL. The effect of specimen thickness and punch-die clearance on the measured mechanical properties of some alloys Ultrafine Grained Materials Iii. 565-570. |
0.32 |
|
2003 |
Koch CC, Scattergood RO, Murty KL, Guduru RK, Trichy G, Rajulapati KV. Testing techniques for mechanical characterization of nanostructured materials Materials Research Society Symposium - Proceedings. 791: 51-62. DOI: 10.1557/Proc-791-Q3.1 |
0.323 |
|
2003 |
Shih AJ, Scattergood RO, Curry AC, Yonushonis TM, McSpadden SB, Watkins TR. Cost-effective grinding of zirconia using the dense vitreous bond silicon carbide wheel Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 297-303. DOI: 10.1115/1.1559167 |
0.365 |
|
2003 |
Zhu X, Zhang X, Wang H, Sergueeva A, Mukherjee A, Scattergood R, Narayan J, Koch C. Synthesis of bulk nanostructured Zn by combinations of cryomilling and powder consolidation by room temperature milling: optimizing mechanical properties Scripta Materialia. 49: 429-433. DOI: 10.1016/S1359-6462(03)00297-5 |
0.422 |
|
2003 |
Garrell MG, Ma BM, Shih AJ, Lara-Curzio E, Scattergood RO. Mechanical properties of polyphenylene-sulfide (PPS) bonded Nd-Fe-B permanent magnets Materials Science and Engineering A. 359: 375-383. DOI: 10.1016/S0921-5093(03)00400-3 |
0.333 |
|
2003 |
Zhang X, Wang H, Scattergood RO, Narayan J, Koch CC. Evolution of microstructure and mechanical properties of in situ consolidated bulk ultra-fine-grained and nanocrystalline Zn prepared by ball milling Materials Science and Engineering A. 344: 175-181. DOI: 10.1016/S0921-5093(02)00422-7 |
0.476 |
|
2003 |
Qu J, Riester L. L, Shih AJ, Scattergood RO, Lara-Curzio E, Watkins TR. Nanoindentation characterization of surface layers of electrical discharge machined WC-Co Materials Science and Engineering A. 344: 125-131. DOI: 10.1016/S0921-5093(02)00395-7 |
0.344 |
|
2003 |
Garrell MG, Shih AJ, Ma BM, Lara-Curzio E, Scattergood RO. Mechanical properties of Nylon bonded Nd-Fe-B permanent magnets Journal of Magnetism and Magnetic Materials. 257: 32-43. DOI: 10.1016/S0304-8853(02)00983-6 |
0.376 |
|
2003 |
Koch CC, Scattergood RO. Grain Size Distribution and Mechanical Properties of Nanostructure Materials Processing and Properties of Structural Nanomaterial: Proceedings of Symposia Held At the Materials Science and Technology 2003 Meeting. 45-52. |
0.351 |
|
2002 |
Zhang X, Wang H, Scattergood RO, Narayan J, Koch CC, Sergueeva AV, Mukherjee AK. Tensile elongation (110%) observed in ultrafine-grained Zn at room temperature Applied Physics Letters. 81: 823-825. DOI: 10.1063/1.1494866 |
0.457 |
|
2002 |
Zhang X, Wang H, Scattergood R, Narayan J, Koch C, Sergueeva A, Mukherjee A. Studies of deformation mechanisms in ultra-fine-grained and nanostructured Zn Acta Materialia. 50: 4823-4830. DOI: 10.1016/S1359-6454(02)00349-X |
0.46 |
|
2002 |
Zhang X, Wang H, Scattergood RO, Narayan J, Koch CC. Modulated oscillatory hardening and dynamic recrystallization in cryomilled nanocrystalline Zn Acta Materialia. 50: 3995-4004. DOI: 10.1016/S1359-6454(02)00199-4 |
0.447 |
|
2002 |
Zhang X, Wang H, Scattergood RO, Narayan J, Koch CC. Mechanical properties of cyromilled nanocrystalline Zn studied by the miniaturized disk bend test Acta Materialia. 50: 3527-3533. DOI: 10.1016/S1359-6454(02)00176-3 |
0.432 |
|
2002 |
Rhoney BK, Shih AJ, Scattergood RO, Akemon JL, Gust DJ, Grant MB. Wire electrical discharge machining of metal bond diamond wheels for ceramic grinding International Journal of Machine Tools and Manufacture. 42: 1355-1362. DOI: 10.1016/S0890-6955(02)00056-1 |
0.324 |
|
2002 |
Rhoney BK, Shih AJ, Scattergood RO, Ott R, McSpadden SB. Wear mechanism of metal bond diamond wheels trued by wire electrical discharge machining Wear. 252: 644-653. DOI: 10.1016/S0043-1648(02)00019-4 |
0.375 |
|
2000 |
Sharp KW, Miller MH, Scattergood RO. Analysis of the grain depth-of-cut in plunge grinding Precision Engineering. 24: 220-230. DOI: 10.1016/S0141-6359(00)00032-5 |
0.348 |
|
1996 |
Talia JE, Ballout YA, Scattergood RO. Erosion ripple formation mechanism in aluminum and aluminum alloys Wear. 196: 285-294. DOI: 10.1016/0043-1648(96)06928-1 |
0.39 |
|
1995 |
Morris JC, Callahan DL, Kulik J, Patten JA, Scattergood RO. Origins of the Ductile Regime in Single‐Point Diamond Turning of Semiconductors Journal of the American Ceramic Society. 78: 2015-2020. DOI: 10.1111/J.1151-2916.1995.Tb08612.X |
0.359 |
|
1993 |
Smith SM, Singh JP, Scattergood RO. Processing and Characterization of SiC‐Whisker‐Reinforced Alumina‐Matrix Composites Journal of the American Ceramic Society. 76: 497-502. DOI: 10.1111/J.1151-2916.1993.Tb03813.X |
0.359 |
|
1993 |
Morrison CT, Routbort JL, Scattergood RO, Warren R. Erosion of an aligned alumina-stainless steel composite Wear. 160: 345-350. DOI: 10.1016/0043-1648(93)90439-S |
0.344 |
|
1992 |
Routbort JL, Scattergood RO. Solid Particle Erosion of Ceramics and Ceramic Composites Key Engineering Materials. 71: 23-50. DOI: 10.4028/Www.Scientific.Net/Kem.71.23 |
0.314 |
|
1992 |
Srinivasan S, Russ JC, Scattergood RO. Reply to “comments on ‘grain size measurements using the point-sampled intercept technique’” by G. F. Vander Voort and A. M. Gokhale Scripta Metallurgica Et Materialia. 26: 1661-1662. DOI: 10.1016/0956-716X(92)90274-I |
0.38 |
|
1991 |
Bifano TG, Dow TA, Scattergood RO. Ductile-Regime Grinding: A New Technology for Machining Brittle Materials Journal of Engineering For Industry. 113: 184-189. DOI: 10.1115/1.2899676 |
0.348 |
|
1991 |
Srinivasan S, Russ JC, Scattergood RO. Grain size measurements using the point-sampled intercept technique Scripta Metallurgica Et Materiala. 25: 931-934. DOI: 10.1016/0956-716X(91)90251-U |
0.322 |
|
1991 |
Srinivasan S, Scattergood RO. R curve effects in solid particle erosion of ceramics Wear. 142: 115-133. DOI: 10.1016/0043-1648(91)90156-O |
0.336 |
|
1991 |
Murugesh L, Srinivasan S, Scattergood RO. Models and material properties for erosion of ceramics Journal of Materials Engineering. 13: 55-61. DOI: 10.1007/Bf02834124 |
0.346 |
|
1991 |
Murugesh L, Scattergood RO. Effect of erodent properties on the erosion of alumina Journal of Materials Science. 26: 5456-5466. DOI: 10.1007/Bf02403943 |
0.339 |
|
1990 |
Srinivasan S, Russ JC, Scattergood RO. Fractal Analysis of Erosion Surfaces Journal of Materials Research. 5: 2616-2619. DOI: 10.1557/Jmr.1990.2616 |
0.305 |
|
1990 |
Srinivasan S, Scattergood RO, Pfeiffer G, Sparks RG, Paesler MA. Low‐Temperature Treatment of Transformation‐Toughened Partially Stabilized Magnesia‐Doped Zirconia–A Solid Particle Erosion Study Journal of the American Ceramic Society. 73: 1421-1424. DOI: 10.1111/J.1151-2916.1990.Tb05216.X |
0.317 |
|
1988 |
SRINIVASAN S, SCATTERGOOD RO. Erosion of Mg‐PSZ by Solid Particle Impact Advanced Ceramic Materials. 3: 345-352. DOI: 10.1111/J.1551-2916.1988.Tb00232.X |
0.353 |
|
1988 |
Srinivasan S, Scattergood RO. Effect of erodent hardness on erosion of brittle materials Wear. 128: 139-152. DOI: 10.1016/0043-1648(88)90180-9 |
0.351 |
|
1988 |
Srinivasan S, Scattergood RO, Warren R. Erosion of fiber reinforced Ai-4 pet CU composites Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 19: 1785-1793. DOI: 10.1007/Bf02645147 |
0.332 |
|
1987 |
Srinivasan S, Scattergood RO. On lateral cracks in glass Journal of Materials Science. 22: 3463-3469. DOI: 10.1007/Bf01161443 |
0.335 |
|
1986 |
Hovis SK, Talia JE, Scattergood RO. Erosion in multiphase systems Wear. 108: 139-155. DOI: 10.1016/0043-1648(86)90093-1 |
0.365 |
|
1986 |
Morrison CT, Scattergood RO, Routbort JL. Erosion of 304 stainless steel Wear. 111: 1-13. DOI: 10.1016/0043-1648(86)90071-2 |
0.347 |
|
1986 |
Hovis SK, Talia J, Scattergood RO. Erosion mechanisms in aluminum and Al-Si alloys Wear. 107: 175-181. DOI: 10.1016/0043-1648(86)90026-8 |
0.415 |
|
1986 |
Anand K, Morrison C, Scattergood RO, Conrad H, Routbort JL, Warren R. EROSION OF MULTIPHASE MATERIALS Institute of Physics Conference Series. 949-961. |
0.325 |
|
Show low-probability matches. |