Year |
Citation |
Score |
2020 |
Gomez M, No T, Schmitz T. Digital force prediction for milling Procedia Manufacturing. 48: 873-881. DOI: 10.1016/J.Promfg.2020.05.125 |
0.377 |
|
2020 |
Schmitz T. Modal interactions for spindle, holders, and tools Procedia Manufacturing. 48: 457-465. DOI: 10.1016/J.Promfg.2020.05.069 |
0.358 |
|
2020 |
Gomez M, No T, Smith S, Schmitz T. Cutting force and stability prediction for inserted cutters Procedia Manufacturing. 48: 443-451. DOI: 10.1016/J.Promfg.2020.05.067 |
0.39 |
|
2020 |
Schmitz T, Gomez M, Honeycutt A, Karandikar J, Shim J, Ro S, Hwang J. Uncertainty evaluation for twist drilling stability model Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 66: 324-332. DOI: 10.1016/J.Precisioneng.2020.08.007 |
0.371 |
|
2020 |
Betters ED, West J, Noakes M, Nycz A, Smith S, Schmitz TL. Dynamic stiffness modification by internal features in additive manufacturing Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 66: 125-134. DOI: 10.1016/J.Precisioneng.2020.04.024 |
0.311 |
|
2020 |
Gomez M, Schmitz T. Low-cost, constrained-motion dynamometer for milling force measurement Manufacturing Letters. 25: 34-39. DOI: 10.1016/J.Mfglet.2020.07.001 |
0.346 |
|
2020 |
Copenhaver R, Schmitz T. Modeling and simulation of modulated tool path (MTP) turning stability Manufacturing Letters. 24: 67-71. DOI: 10.1016/J.Mfglet.2020.03.013 |
0.39 |
|
2020 |
Karandikar J, Honeycutt A, Schmitz T, Smith S. Stability boundary and optimal operating parameter identification in milling using Bayesian learning Journal of Manufacturing Processes. DOI: 10.1016/J.Jmapro.2020.04.019 |
0.345 |
|
2019 |
No T, Gomez M, Copenhaver R, Perez JU, Tyler C, Schmitz TL. Force and Stability Modeling for Non-Standard Edge Geometry Endmills Journal of Manufacturing Science and Engineering-Transactions of the Asme. 141. DOI: 10.1115/1.4045057 |
0.308 |
|
2019 |
Salehi M, Schmitz T, Copenhaver R, Haas R, Ovtcharova J. Probabilistic Sequential Prediction of Cutting Forces using Kienzle models in Orthogonal Turning Process Journal of Manufacturing Science and Engineering-Transactions of the Asme. 141: 11009. DOI: 10.1115/1.4041710 |
0.342 |
|
2019 |
Gomez MF, Schmitz TL. Displacement-based dynamometer for milling force measurement Procedia Manufacturing. 34: 867-875. DOI: 10.1016/J.Promfg.2019.06.161 |
0.33 |
|
2019 |
Cherukuri H, Perez-Bernabeu E, Selles MA, Schmitz TL. A neural network approach for chatter prediction in turning Procedia Manufacturing. 34: 885-892. DOI: 10.1016/J.Promfg.2019.06.159 |
0.321 |
|
2019 |
No T, Gomez M, Copenhaver R, Perez JU, Tyler C, Schmitz TL. Scanning and modeling for non-standard edge geometry endmills Procedia Manufacturing. 34: 305-315. DOI: 10.1016/J.Promfg.2019.06.154 |
0.389 |
|
2019 |
Kossack C, Ziegert J, Schmitz T. The sliding friction contact frequency response function Procedia Manufacturing. 34: 73-82. DOI: 10.1016/J.Promfg.2019.06.119 |
0.624 |
|
2019 |
Kossack C, Ziegert J, Schmitz T. Energy-based friction analysis Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 55: 88-94. DOI: 10.1016/J.Precisioneng.2018.08.011 |
0.617 |
|
2019 |
Honeycutt A, Schmitz T. Milling bifurcations for strongly asymmetric, symmetric, and weakly asymmetric system dynamics Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 55: 1-13. DOI: 10.1016/J.Precisioneng.2018.08.001 |
0.324 |
|
2019 |
Schmitz T, Honeycutt A, Gomez M, Stokes M, Betters E. Multi-point coupling for tool point receptance prediction Journal of Manufacturing Processes. 43: 2-11. DOI: 10.1016/J.Jmapro.2019.03.043 |
0.362 |
|
2019 |
Cong DC, Hwang J, Shim J, Ro S, Schmitz T. Effects of a drawbar design and force on multipurpose aerostatic spindle dynamics International Journal of Machine Tools & Manufacture. 144: 103424. DOI: 10.1016/J.Ijmachtools.2019.103424 |
0.403 |
|
2018 |
Gomez M, Heigel JC, Schmitz T. Force modeling for hybrid manufacturing Procedia Manufacturing. 26: 790-797. DOI: 10.1016/J.Promfg.2018.07.096 |
0.364 |
|
2018 |
Honeycutt A, Schmitz T. Receptance coupling model for variable dynamics in fixed-free thin rib machining Procedia Manufacturing. 26: 173-180. DOI: 10.1016/J.Promfg.2018.07.024 |
0.329 |
|
2018 |
Junior MV, Baptista EA, Araki L, Smith S, Schmitz T. The role of tool presetting in milling stability uncertainty Procedia Manufacturing. 26: 164-172. DOI: 10.1016/J.Promfg.2018.07.023 |
0.383 |
|
2018 |
Salehi M, Schmitz TL, Copenhaver R, Haas R, Ovtcharova J. Probabilistic Prediction of Cutting and Ploughing Forces using Extended Kienzle Force Model in Orthogonal Turning Process Procedia Cirp. 77: 90-93. DOI: 10.1016/J.Procir.2018.08.228 |
0.339 |
|
2018 |
Copenhaver R, Schmitz T, Smith S. Stability analysis of modulated tool path turning Cirp Annals-Manufacturing Technology. 67: 49-52. DOI: 10.1016/J.Cirp.2018.03.010 |
0.353 |
|
2017 |
Sencer B, Schmitz T, Karandikar J, Tyler C. Guest editor letter Journal of Manufacturing Science and Engineering-Transactions of the Asme. 140: 20301. DOI: 10.1115/1.4038639 |
0.692 |
|
2017 |
Honeycutt A, Schmitz TL. A Study of Milling Surface Quality during Period-2 Bifurcations Procedia Manufacturing. 10: 183-193. DOI: 10.1016/J.Promfg.2017.07.046 |
0.352 |
|
2017 |
Copenhaver R, Rubeo MA, Guzorek S, Landge S, Smith KS, Ziegert J, Schmitz TL. A Fundamental Investigation of Modulated Tool Path Turning Mechanics Procedia Manufacturing. 10: 159-170. DOI: 10.1016/J.Promfg.2017.07.043 |
0.642 |
|
2017 |
Rubeo MA, Schmitz TL. Amplitude Ratio: A New Metric for Milling Stability Identification Procedia Manufacturing. 10: 351-362. DOI: 10.1016/J.Promfg.2017.07.004 |
0.336 |
|
2017 |
Kiran K, Rubeo M, Kayacan MC, Schmitz T. Two degree of freedom frequency domain surface location error prediction Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 48: 234-242. DOI: 10.1016/J.Precisioneng.2016.12.006 |
0.373 |
|
2017 |
Schmitz TL, Honeycutt A. Analytical solutions for fixed-free beam dynamics in thin rib machining Journal of Manufacturing Processes. 30: 41-50. DOI: 10.1016/J.Jmapro.2017.09.002 |
0.314 |
|
2017 |
Kiran K, Satyanarayana H, Schmitz T. Compensation of frequency response function measurements by inverse RCSA International Journal of Machine Tools & Manufacture. 121: 96-100. DOI: 10.1016/J.Ijmachtools.2017.04.004 |
0.332 |
|
2016 |
Honeycutt A, Schmitz TL. A new metric for automated stability identification in time domain milling simulation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 138. DOI: 10.1115/1.4032586 |
0.352 |
|
2016 |
Menezes J, Rubeo MA, Kiran K, Honeycutt A, Schmitz TL. Productivity Progression with Tool Wear in Titanium Milling Procedia Manufacturing. 5: 427-441. DOI: 10.1016/J.Promfg.2016.08.036 |
0.396 |
|
2016 |
Honeycutt A, Schmitz TL. Experimental Validation of Period-n Bifurcations in Milling☆ Procedia Manufacturing. 5: 362-374. DOI: 10.1016/J.Promfg.2016.08.031 |
0.328 |
|
2016 |
Rubeo MA, Schmitz TL. Milling Force Modeling: A Comparison of Two Approaches Procedia Manufacturing. 5: 90-105. DOI: 10.1016/J.Promfg.2016.08.010 |
0.356 |
|
2016 |
Lu C, Troutman JR, Schmitz TL, Ellis JD, Tarbutton JA. Application of the continuous wavelet transform in periodic error compensation Precision Engineering. 44: 245-251. DOI: 10.1016/J.Precisioneng.2016.01.008 |
0.324 |
|
2016 |
Ransom T, Honeycutt A, Schmitz T. A new tunable dynamics platform for milling experiments Precision Engineering. 44: 252-256. DOI: 10.1016/J.Precisioneng.2016.01.005 |
0.313 |
|
2016 |
Rubeo MA, Schmitz TL. Global stability predictions for flexible workpiece milling using time domain simulation Journal of Manufacturing Systems. 40: 8-14. DOI: 10.1016/J.Jmsy.2016.05.003 |
0.397 |
|
2015 |
Chang K, Chaudhuri A, Rue J, Haftka R, Ifju P, Tyler C, Ganguly V, Schmitz T. Improving the fabrication process of micro-air-vehicle flapping wings Aiaa Journal. 53: 3039-3048. DOI: 10.2514/1.J053884 |
0.773 |
|
2015 |
Schmitz T. The Microphone Feedback Analogy for Chatter in Machining Shock and Vibration. 2015: 1-5. DOI: 10.1155/2015/976819 |
0.367 |
|
2015 |
Schmitz TL. Investigation of Retention Knob Geometry on Machining Dynamics Procedia Manufacturing. 1: 578-583. DOI: 10.1016/J.Promfg.2015.09.034 |
0.353 |
|
2015 |
Kolar P, Fojtu P, Schmitz T. On Cutting Force Coefficient Model with Respect to Tool Geometry and Tool Wear Procedia Manufacturing. 1: 708-720. DOI: 10.1016/J.Promfg.2015.09.020 |
0.391 |
|
2015 |
Schmitz TL, Honeycutt A. The Extended Milling Bifurcation Diagram Procedia Manufacturing. 1: 466-476. DOI: 10.1016/J.Promfg.2015.09.005 |
0.346 |
|
2015 |
Tyler CT, Troutman JR, Schmitz TL. A coupled dynamics, multiple degree of freedom process damping model, Part 2: Milling Precision Engineering. DOI: 10.1016/j.precisioneng.2016.03.018 |
0.309 |
|
2015 |
Tyler CT, Troutman JR, Schmitz TL. A coupled dynamics, multiple degree of freedom process damping model, Part 1: Turning Precision Engineering. DOI: 10.1016/J.Precisioneng.2016.03.017 |
0.425 |
|
2015 |
Rubeo MA, Schmitz TL. Mechanistic force model coefficients: A comparison of linear regression and nonlinear optimization Precision Engineering. DOI: 10.1016/J.Precisioneng.2016.03.008 |
0.357 |
|
2015 |
Tyler CT, Troutman J, Schmitz TL. Radial depth of cut stability lobe diagrams with process damping effects Precision Engineering. 40: 318-324. DOI: 10.1016/J.Precisioneng.2014.11.004 |
0.358 |
|
2015 |
Hupman AC, Abbas AE, Schmitz TL. Incentives versus value in manufacturing systems: An application to high-speed milling Journal of Manufacturing Systems. 36: 20-26. DOI: 10.1016/J.Jmsy.2015.02.004 |
0.306 |
|
2015 |
Karandikar J, McLeay T, Turner S, Schmitz T. Tool wear monitoring using naïve Bayes classifiers International Journal of Advanced Manufacturing Technology. 77: 1613-1626. DOI: 10.1007/S00170-014-6560-6 |
0.771 |
|
2014 |
Karandikar J, Traverso M, Abbas A, Schmitz T. Bayesian inference for milling stability using a random walk approach Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4027226 |
0.764 |
|
2014 |
Graziano AA, Ganguly V, Schmitz T, Yamaguchi H. Control of lay on cobalt chromium alloy finished surfaces using magnetic abrasive finishing and its effect on wettability Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4026935 |
0.731 |
|
2014 |
Karandikar JM, Schmitz TL, Abbas AE. Application of bayesian inference to milling force modeling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4026365 |
0.76 |
|
2014 |
Troutman J, Evans CJ, Ganguly V, Schmitz TL. Performance evaluation of a vibration desensitized scanning white light interferometer Surface Topography: Metrology and Properties. 2. DOI: 10.1088/2051-672X/2/1/014011 |
0.748 |
|
2014 |
Childs T, Tyler C, Evans C, Schmitz T, Paul E, Browy E. Estimation of Cutting Conditions in Precision Micromachining of CuNi Alloys of Varying Composition Procedia Cirp. 14: 383-388. DOI: 10.1016/J.Procir.2014.03.020 |
0.306 |
|
2014 |
Karandikar JM, Tyler CT, Abbas A, Schmitz TL. Value of information-based experimental design: Application to process damping in milling Precision Engineering. 38: 799-808. DOI: 10.1016/J.Precisioneng.2014.04.008 |
0.756 |
|
2014 |
Ganguly V, Schmitz TL. Phase correction for frequency response function measurements Precision Engineering. 38: 409-413. DOI: 10.1016/J.Precisioneng.2013.12.007 |
0.751 |
|
2014 |
Karandikar JM, Abbas AE, Schmitz TL. Tool life prediction using Bayesian updating. Part 2: Turning tool life using a Markov Chain Monte Carlo approach Precision Engineering. 38: 9-17. DOI: 10.1016/J.Precisioneng.2013.06.007 |
0.765 |
|
2014 |
Karandikar JM, Abbas AE, Schmitz TL. Tool life prediction using Bayesian updating. Part 1: Milling tool life model using a discrete grid method Precision Engineering. 38: 18-27. DOI: 10.1016/J.Precisioneng.2013.06.006 |
0.765 |
|
2014 |
Chaudhuri A, Haftka RT, Ifju P, Chang K, Tyler C, Schmitz T. Experimental flapping wing optimization and uncertainty quantification using limited samples Structural and Multidisciplinary Optimization. 51: 957-970. DOI: 10.1007/S00158-014-1184-X |
0.517 |
|
2014 |
Chang K, Rue J, Ifju P, Haftka R, Schmitz T, Tyler C, Chaudhuri A, Ganguly V. Analysis of thrust production in small synthetic flapping wings Conference Proceedings of the Society For Experimental Mechanics Series. 8: 1-8. DOI: 10.1007/978-3-319-00876-9_1 |
0.689 |
|
2014 |
Ganguly V, Schmitz TL. Correction for synchronization errors in dynamic measurements Transactions of the North American Manufacturing Research Institution of Sme. 42: 335-344. |
0.743 |
|
2014 |
Troutman JR, Ganguly V, Nguyen N, Schmitz TL. Evaluation of periodic error compensation using a time domain regression algorithm Proceedings - Aspe 2014 Annual Meeting. 457-462. |
0.727 |
|
2013 |
Ganguly V, Schmitz T, Graziano A, Yamaguchi H. Force measurement and analysis for magnetic field-assisted finishing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4023723 |
0.725 |
|
2013 |
Karandikar JM, Abbas AE, Schmitz TL. Tool life prediction using random walk bayesian updating Machining Science and Technology. 17: 410-442. DOI: 10.1080/10910344.2013.806103 |
0.765 |
|
2013 |
Ganguly V, Schmitz TL. Spindle dynamics identification using particle swarm optimization Transactions of the North American Manufacturing Research Institution of Sme. 41: 300-309. DOI: 10.1016/J.Jmapro.2013.05.008 |
0.765 |
|
2013 |
Tyler CT, Schmitz TL. Analytical process damping stability prediction Journal of Manufacturing Processes. 15: 121-126. DOI: 10.1016/J.Jmapro.2012.11.006 |
0.415 |
|
2013 |
Rue J, Chang K, Ifju P, Haftka R, Schmitz T, McIntire J, Tyler C, Ganguly V, Chaudhuri A. Fabrication and analysis of small flapping wings Conference Proceedings of the Society For Experimental Mechanics Series. 3: 337-344. DOI: 10.1007/978-1-4614-4235-6_47 |
0.719 |
|
2013 |
Ganguly V, Schmitz TL. Correction for amplifier-induced phase lag in capacitance gage measurements Proceedings of the 28th Annual Meeting of the American Society For Precision Engineering, Aspe 2013. 115-120. |
0.7 |
|
2013 |
Karandikar JM, Tyler CT, Schmitz TL. Process damping coefficient identification using Bayesian inference Transactions of the North American Manufacturing Research Institution of Sme. 41: 55-65. |
0.74 |
|
2013 |
Schmitz TL, Ganguly V, Yun J, Loughridge R. Periodic error correction in heterodyne interferometry Proceedings of the American Control Conference. 3712-3716. |
0.719 |
|
2013 |
Karandikar JM, Abbas A, Schmitz TL. Remaining useful tool life predictions in turning using Bayesian inference International Journal of Prognostics and Health Management. 4. |
0.749 |
|
2012 |
Graziano AA, Ganguly V, Bullard JW, Yamaguchi H, Schmitz T. Characteristics of cobalt chromium alloy surfaces finished using magnetic abrasive finishing Asme 2012 International Manufacturing Science and Engineering Conference Collocated With the 40th North American Manufacturing Research Conference and in Participation With the Int. Conf., Msec 2012. 457-464. DOI: 10.1115/MSEC2012-7367 |
0.714 |
|
2012 |
Ganguly V, Schmitz TL, Graziano A, Yamaguchi H. An analysis of polishing forces in magnetic field assisted finishing Proceedings - Aspe 2012 Annual Meeting. 58-61. DOI: 10.1115/MSEC2012-7256 |
0.702 |
|
2012 |
Susil G, Argibay N, Ingley C, Schmitz T, Sawyer WG, Bourne G. In situ surface hardening during turning via pyrolytic carburization Precision Engineering. 36: 668-672. DOI: 10.1016/J.Precisioneng.2012.04.007 |
0.324 |
|
2012 |
Kumar UV, Schmitz TL. Spindle dynamics identification for Receptance Coupling Substructure Analysis Precision Engineering. 36: 435-443. DOI: 10.1016/J.Precisioneng.2012.01.007 |
0.404 |
|
2012 |
Schmitz TL, Adhia C, Kim HS. Periodic error quantification for non-constant velocity motion Precision Engineering. 36: 153-157. DOI: 10.1016/J.Precisioneng.2011.06.004 |
0.306 |
|
2012 |
Karandikar JM, Schmitz TL, Abbas AE. Spindle speed selection for tool life testing using Bayesian inference Transactions of the North American Manufacturing Research Institution of Sme. 40: 297-306. DOI: 10.1016/J.Jmsy.2012.07.013 |
0.762 |
|
2012 |
Bediz B, Kumar U, Schmitz TL, Burak Ozdoganlar O. Modeling and experimentation for three-dimensional dynamics of endmills International Journal of Machine Tools and Manufacture. 53: 39-50. DOI: 10.1016/J.Ijmachtools.2011.09.005 |
0.311 |
|
2012 |
Karandikar JM, Kim NH, Schmitz TL. Prediction of remaining useful life for fatigue-damaged structures using Bayesian inference Engineering Fracture Mechanics. 96: 588-605. DOI: 10.1016/J.Engfracmech.2012.09.013 |
0.721 |
|
2012 |
Ozturk E, Kumar U, Turner S, Schmitz T. Investigation of spindle bearing preload on dynamics and stability limit in milling Cirp Annals-Manufacturing Technology. 61: 343-346. DOI: 10.1016/J.Cirp.2012.03.134 |
0.396 |
|
2012 |
Ganguly V, Schmitz TL, White D, Yun J. Experimental evaluation of phase digitizing nonlinearity correction in heterodyne interferometry Proceedings - Aspe 2012 Annual Meeting. 264-267. |
0.695 |
|
2012 |
Karandikar JM, Schmitz TL, Abbas AE. Spindle speed selection for tool life testing using Bayesian inference Transactions of the North American Manufacturing Research Institution of Sme. 40: 297-306. |
0.75 |
|
2011 |
Schmitz TL, Karandikar J, Ho Kim N, Abbas A. Uncertainty in machining: Workshop summary and contributions Journal of Manufacturing Science and Engineering, Transactions of the Asme. 133. DOI: 10.1115/1.4004923 |
0.755 |
|
2011 |
Kumanchik L, Schmitz T, Pratt J. Simultaneous normal and torsional force measurement by cantilever surface contour analysis Measurement Science and Technology. 22: 55103. DOI: 10.1088/0957-0233/22/5/055103 |
0.339 |
|
2011 |
Ganguly V, Kim NH, Kim HS, Schmitz T. Sensitivity analysis of Periodic errors in heterodyne interferometry Measurement Science and Technology. 22. DOI: 10.1088/0957-0233/22/3/035305 |
0.741 |
|
2011 |
An D, Choi JH, Schmitz TL, Kim NH. In situ monitoring and prediction of progressive joint wear using Bayesian statistics Wear. 270: 828-838. DOI: 10.1016/J.Wear.2011.02.010 |
0.339 |
|
2011 |
Graziano A, Schmitz TL. Sensor design and evaluation for on-machine probing of extruded tool joints Precision Engineering. 35: 525-535. DOI: 10.1016/J.Precisioneng.2011.02.010 |
0.386 |
|
2011 |
Schluchter C, Ganguly V, Chu D, Schmitz TL. Low velocity compensation for first order periodic error caused by beam shear Precision Engineering. 35: 241-247. DOI: 10.1016/J.Precisioneng.2010.09.014 |
0.731 |
|
2011 |
Kumanchik L, Schmitz TL, Pratt JR. An interferometric platform for studying AFM probe deflection Precision Engineering. 35: 248-254. DOI: 10.1016/J.Precisioneng.2010.09.013 |
0.34 |
|
2011 |
Houck L, Schmitz TL, Scott Smith K. A tuned holder for increased boring bar dynamic stiffness Journal of Manufacturing Processes. 13: 24-29. DOI: 10.1016/J.Jmapro.2010.09.002 |
0.315 |
|
2010 |
Mukras S, Kim NH, Mauntler NA, Schmitz T, Sawyer WG. Comparison Between Elastic Foundation and Contact Force Models in Wear Analysis of Planar Multibody System Journal of Tribology. 132. DOI: 10.1115/1.4001786 |
0.335 |
|
2010 |
Mukras S, Kim NH, Mauntler NA, Schmitz TL, Sawyer WG. Analysis of planar multibody systems with revolute joint wear Wear. 268: 643-652. DOI: 10.1016/J.Wear.2009.10.014 |
0.328 |
|
2010 |
Schmitz TL. Torsional and axial frequency response prediction by RCSA Precision Engineering. 34: 345-356. DOI: 10.1016/J.Precisioneng.2009.08.005 |
0.312 |
|
2010 |
Kim HS, Schmitz TL. Periodic error calculation from spectrum analyzer data Precision Engineering. 34: 218-230. DOI: 10.1016/J.Precisioneng.2009.06.001 |
0.327 |
|
2010 |
Bhattacharyya A, Schueller JK, Mann BP, Ziegert JC, Schmitz TL, Taylor FJ, Fitz-Coy NG. A closed form mechanistic cutting force model for helical peripheral milling of ductile metallic alloys International Journal of Machine Tools and Manufacture. 50: 538-551. DOI: 10.1016/J.Ijmachtools.2010.03.003 |
0.634 |
|
2010 |
Karandikar JM, Zapata RE, Schmitz TL. Combining tool wear and stability in high-speed machining performance prediction Proceedings - Aspe 2010 Annual Meeting. 50: 172-175. |
0.75 |
|
2009 |
Mukras S, Mauntler NA, Kim NH, Schmitz TL, Sawyer WG. Modeling a slider-crank mechanism with joint wear Sae International Journal of Passenger Cars - Mechanical Systems. 2: 600-612. DOI: 10.4271/2009-01-0403 |
0.325 |
|
2009 |
Abbas AE, Yang L, Zapata R, Schmitz TL. Application of decision analysis to milling profit maximisation: An introduction International Journal of Materials and Product Technology. 35: 64-88. DOI: 10.1504/Ijmpt.2009.025220 |
0.378 |
|
2009 |
Kurdi MH, Schmitz TL, Haftka RT, Mann BP. Milling optimisation of removal rate and accuracy with uncertainty: Part 1: Parameter selection International Journal of Materials and Product Technology. 35: 3-25. DOI: 10.1504/Ijmpt.2009.025209 |
0.785 |
|
2009 |
Zapata-Ramos RE, Schmitz TL, Traverso M, Abbas A. Value of information and experimentation in milling profit optimisation International Journal of Mechatronics and Manufacturing Systems. 2: 580. DOI: 10.1504/Ijmms.2009.028082 |
0.349 |
|
2009 |
Schmitz TL, Chu DC, Kim HS. First and second order periodic error measurement for non-constant velocity motions Precision Engineering. 33: 353-361. DOI: 10.1016/J.Precisioneng.2008.10.001 |
0.339 |
|
2009 |
Filiz S, Cheng CH, Powell KB, Schmitz TL, Ozdoganlar OB. An improved tool-holder model for RCSA tool-point frequency response prediction Precision Engineering. 33: 26-36. DOI: 10.1016/J.Precisioneng.2008.03.003 |
0.383 |
|
2009 |
Bourne GR, Bardt J, Sawyer WG, Ziegert J, Zeenberg D, Schmitz T. Closed channel fabrication using micromolding of metallic glass Journal of Materials Processing Technology. 209: 4765-4768. DOI: 10.1016/J.Jmatprotec.2008.12.003 |
0.546 |
|
2008 |
Schmitz TL, Gardner N, Vaughn M, Medicus K, Davies A. Improving optical bench radius measurements using stage error motion data. Applied Optics. 47: 6692-700. PMID 19104521 DOI: 10.1364/Ao.47.006692 |
0.337 |
|
2008 |
Kurdi MH, Haftka RT, Schmitz TL, Mann BP. A robust semi-analytical method for calculating the response sensitivity of a time delay system Journal of Vibration and Acoustics, Transactions of the Asme. 130. DOI: 10.1115/1.2981093 |
0.773 |
|
2008 |
Mauntler NA, Schmitz TL, Ziegert JC. The influence of process variation on a cortical bone interference fit pin connection Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0245011-0245017. DOI: 10.1115/1.2896103 |
0.599 |
|
2008 |
Schmitz TL, Ziegert JC, Canning JS, Zapata R. Case study: A comparison of error sources in high-speed milling Precision Engineering. 32: 126-133. DOI: 10.1016/J.Precisioneng.2007.06.001 |
0.631 |
|
2007 |
Bardt JA, Bourne GR, Schmitz TL, Ziegert JC, Sawyer WG. Micromolding three-dimensional amorphous metal structures Journal of Materials Research. 22: 339-343. DOI: 10.1557/Jmr.2007.0035 |
0.568 |
|
2007 |
Kumanchik L, Schmitz T, Pratt J, Ziegert J. Full field displacement measurements of AFM cantilevers during loading Proceedings of the Asme International Manufacturing Science and Engineering Conference 2007, Msec2007. 381-388. DOI: 10.1115/MSEC2007-31041 |
0.514 |
|
2007 |
Kim HS, Schmitz TL. Bivariate uncertainty analysis for impact testing Measurement Science and Technology. 18: 3565-3571. DOI: 10.1088/0957-0233/18/11/041 |
0.383 |
|
2007 |
Cheng CH, Schmitz TL, Duncan GS. Rotating tool point frequency response prediction using RCSA Machining Science and Technology. 11: 433-446. DOI: 10.1080/10910340701539866 |
0.375 |
|
2007 |
Kumanchik LM, Schmitz TL. Improved analytical chip thickness model for milling Precision Engineering. 31: 317-324. DOI: 10.1016/J.Precisioneng.2006.12.001 |
0.366 |
|
2007 |
Schmitz TL, Kim HS. Monte Carlo evaluation of periodic error uncertainty Precision Engineering. 31: 251-259. DOI: 10.1016/J.Precisioneng.2006.10.001 |
0.306 |
|
2007 |
Schmitz TL, Powell K, Won D, Scott Duncan G, Gregory Sawyer W, Ziegert JC. Shrink fit tool holder connection stiffness/damping modeling for frequency response prediction in milling International Journal of Machine Tools and Manufacture. 47: 1368-1380. DOI: 10.1016/J.Ijmachtools.2006.08.009 |
0.633 |
|
2007 |
Schmitz TL, Couey J, Marsh E, Mauntler N, Hughes D. Runout effects in milling: Surface finish, surface location error, and stability International Journal of Machine Tools and Manufacture. 47: 841-851. DOI: 10.1016/J.Ijmachtools.2006.06.014 |
0.394 |
|
2007 |
Suzanne Canning J, Ziegert JC, Schmitz TL. Coordinate metrology uncertainty using parallel kinematic techniques International Journal of Machine Tools and Manufacture. 47: 658-665. DOI: 10.1016/J.Ijmachtools.2006.04.010 |
0.643 |
|
2006 |
Schmitz TL, Chu D, Houck L. First-order periodic error correction: Validation for constant and non-constant velocities with variable error magnitudes Measurement Science and Technology. 17: 3195-3203. DOI: 10.1088/0957-0233/17/12/001 |
0.338 |
|
2006 |
Sawyer WG, Ziegert JC, Schmitz TL, Barton T. In situ lubrication with boric acid: Powder delivery of an environmentally benign solid lubricant Tribology Transactions. 49: 290-296. DOI: 10.1080/05698190600639939 |
0.566 |
|
2006 |
Ziegert JC, Stanislaus C, Schmitz TL, Sterling R. Enhanced damping in long slender end mills Journal of Manufacturing Processes. 8: 39-46. DOI: 10.1016/S1526-6125(06)70100-1 |
0.652 |
|
2006 |
Schmitz TL, Houck L, Chu D, Kalem L. Bench-top setup for validation of real time, digital periodic error correction Precision Engineering. 30: 306-313. DOI: 10.1016/J.Precisioneng.2005.10.001 |
0.332 |
|
2006 |
Schmitz TL, Mann BP. Closed-form solutions for surface location error in milling International Journal of Machine Tools and Manufacture. 46: 1369-1377. DOI: 10.1016/J.Ijmachtools.2005.10.007 |
0.357 |
|
2006 |
Canning JS, Zapata R, Ziegert JC, Schmitz TL. A comparative study of part error contributors in high-speed machining Proceedings of the 21st Annual Aspe Meeting, Aspe 2006. |
0.583 |
|
2006 |
Mauntler NA, Ziegert JC, Schmitz TL. Dimensional study of an interference fit allograft Proceedings of the 21st Annual Aspe Meeting, Aspe 2006. |
0.496 |
|
2006 |
Powell KB, Won D, Schmitz TL, Duncan GS, Sawyer WG, Ziegert JC. Tool-holder connection modeling for frequency response prediction in milling Proceedings of the 21st Annual Aspe Meeting, Aspe 2006. |
0.554 |
|
2006 |
Schmitz TL, Ziegert JC, Zapata R, Canning JS. Part accuracy in high-speed machining: Preliminary results Proceedings of the International Conference On Manufacturing Science and Engineering. 2006. |
0.579 |
|
2005 |
Davies A, Schmitz TL. Correcting for stage error motions in radius measurements. Applied Optics. 44: 5884-93. PMID 16231794 DOI: 10.1364/Ao.44.005884 |
0.327 |
|
2005 |
Schmitz TL, Gardner N, Vaughn M, Davies A. Radius case study: Optical bench measurement and uncertainty including stage error motions Proceedings of Spie - the International Society For Optical Engineering. 5879: 1-11. DOI: 10.1117/12.614988 |
0.355 |
|
2005 |
Bardt J, Mauntler N, Bourne G, Schmitz TL, Ziegert JC, Sawyer WG. Metallic glass surface patterning by micro-molding American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 16: 1123-1129. DOI: 10.1115/IMECE2005-81099 |
0.51 |
|
2005 |
Schmitz TL, Duncan GS. Three-component receptance coupling substructure analysis for tool point dynamics prediction Journal of Manufacturing Science and Engineering, Transactions of the Asme. 127: 781-790. DOI: 10.1115/1.2039102 |
0.389 |
|
2005 |
Mann BP, Young KA, Schmitz TL, Dilley DN. Simultaneous stability and surface location error predictions in milling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 127: 446-453. DOI: 10.1115/1.1948394 |
0.366 |
|
2005 |
Schmitz TL, Action JE, Ziegert JC, Sawyer WG. The difficulty of measuring low friction: Uncertainty analysis for friction coefficient measurements Journal of Tribology. 127: 673-678. DOI: 10.1115/1.1843853 |
0.605 |
|
2005 |
Duncan GS, Tummond MF, Schmitz TL. An investigation of the dynamic absorber effect in high-speed machining International Journal of Machine Tools and Manufacture. 45: 497-507. DOI: 10.1016/J.Ijmachtools.2004.09.005 |
0.372 |
|
2005 |
Canning JS, Ziegert JC, Schmitz TL. Uncertainty of spatial coordinate measurements using trilateration Transactions of the North American Manufacturing Research Institute of Sme. 33: 121-128. |
0.514 |
|
2005 |
Bardt JA, Mauntler NA, Ziegert JC, Sawyer WG, Schmitz TL. Precision molding of metallic micro-components Proceedings of the 20th Annual Aspe Meeting, Aspe 2005. |
0.512 |
|
2004 |
Kurdi MH, Haftka RT, Schmitz TL, Mann BP. Simultaneous optimization of removal rate and part accuracy in high-speed milling American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 15: 1001-1009. DOI: 10.1115/IMECE2004-60231 |
0.522 |
|
2004 |
Schmitz TL, Action JE, Burris DL, Ziegert JC, Sawyer WG. Wear-rate uncertainty analysis Journal of Tribology. 126: 802-808. DOI: 10.1115/1.1792675 |
0.607 |
|
2004 |
Schmitz TL, Burns TJ, Ziegert JC, Dutterer B, Winfough WR. Tool length-dependent stability surfaces Machining Science and Technology. 8: 377-397. DOI: 10.1081/Mst-200038989 |
0.644 |
|
2004 |
Schmitz TL, Ziegert JC, Stanislaus C. A method for predicting chatter stability for systems with speed-dependent spindle dynamics Transactions of the North American Manufacturing Research Institute of Sme. 32: 17-24. |
0.543 |
|
2004 |
Ziegert JC, Stanislaus C, Schmitz TL, Sterling R. Enhanced damping in long slender endmills Transactions of the North American Manufacturing Research Institute of Sme. 32: 1-8. |
0.488 |
|
2004 |
Schmitz TL, Action JE, Burris DL, Sawyer WG, Ziegert JC. Measurement uncertainty in tribological wear rate testing Transactions of the North American Manufacturing Research Institute of Sme. 32: 343-350. |
0.537 |
|
2003 |
Schmitz TL, Davies A, Evans CJ, Parks RE. Silicon wafer thickness variation measurements using the National Institute of Standards and Technology infrared interferometer Optical Engineering. 42: 2281-2290. DOI: 10.1117/1.1589757 |
0.319 |
|
2003 |
Davies MA, Yoon H, Schmitz TL, Burns TJ, Kennedy MD. Calibrated thermal microscopy of the tool-chip interface in machining Machining Science and Technology. 7: 167-190. DOI: 10.1081/Mst-120022776 |
0.36 |
|
2003 |
Schmitz TL, Beckwith JF. An investigation of two unexplored periodic error sources in differential-path interferometry Precision Engineering. 27: 311-322. DOI: 10.1016/S0141-6359(03)00036-9 |
0.324 |
|
2002 |
Schmitz TL, Medicus K, Dutterer B. Exploring once-per-revolution audio signal variance as a chatter indicator Machining Science and Technology. 6: 215-233. DOI: 10.1081/Mst-120005957 |
0.314 |
|
2002 |
Schmitz TL, Beckwith JF. Acousto-optic displacement-measuring interferometer: a new heterodyne interferometer with Ångstrom-level periodic error Journal of Modern Optics. 49: 2105-2114. DOI: 10.1080/09500340210123938 |
0.303 |
|
2002 |
Schmitz TL. Automatic trimming of machining stability lobes International Journal of Machine Tools and Manufacture. 42: 1479-1486. DOI: 10.1016/S0890-6955(02)00034-2 |
0.357 |
|
2002 |
Schmitz TL, Evans CJ, Davies A, Estler WT. Displacement uncertainty in interferometric radius measurements Cirp Annals - Manufacturing Technology. 51: 451-454. DOI: 10.1016/S0007-8506(07)61558-3 |
0.324 |
|
2001 |
Schmitz TL, Davies MA, Kennedy MD. Tool point frequency response prediction for high-speed machining by RCSA Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 700-707. DOI: 10.1115/1.1392994 |
0.399 |
|
2001 |
Schmitz T, Davies M, Dutterer B, Ziegert J. The application of high-speed CNC machining to prototype production International Journal of Machine Tools and Manufacture. 41: 1209-1228. DOI: 10.1016/S0890-6955(01)00005-0 |
0.641 |
|
2001 |
Schmitz TL, Davies MA, Medicus K, Snyder J. Improving high-speed machining material removal rates by rapid dynamic analysis Cirp Annals - Manufacturing Technology. 50: 263-268. DOI: 10.1016/S0007-8506(07)62119-2 |
0.4 |
|
2000 |
Schmitz T, Ziegert J. Dynamic evaluation of spatial CNC contouring accuracy Precision Engineering. 24: 99-118. DOI: 10.1016/S0141-6359(99)00034-3 |
0.63 |
|
2000 |
Schmitz TL. Predicting high-speed machining dynamics by substructure analysis Cirp Annals - Manufacturing Technology. 49: 303-308. DOI: 10.1016/S0007-8506(07)62951-5 |
0.386 |
|
1999 |
Schmitz T, Ziegert J. A new sensor for the micrometre-level measurement of three-dimensional, dynamic contours Measurement Science and Technology. 10: 51-62. DOI: 10.1088/0957-0233/10/2/001 |
0.622 |
|
1999 |
Schmitz T, Ziegert J. Examination of surface location error due to phasing of cutter vibrations Precision Engineering. 23: 51-62. DOI: 10.1016/S0141-6359(98)00025-7 |
0.659 |
|
1998 |
Schmitz T, Ziegert J. Premachining computer numerical control contour validation Precision Engineering. 22: 10-18. DOI: 10.1016/S0141-6359(97)00086-X |
0.643 |
|
1997 |
Schmitz TL, Ziegert JC. Dynamic measurement of CNC part paths American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 6: 69-72. |
0.535 |
|
Show low-probability matches. |