| Year |
Citation |
Score |
| 2017 |
Gong C, Pinatti L, Lavigne G, Shaw MT, Scola DA. Thermal stability of end-capped and linear sulfonated polyimides, sulfonated polystyrene, and Nafion 117 Journal of Applied Polymer Science. 135: 45694. DOI: 10.1002/App.45694 |
0.329 |
|
| 2016 |
Heimbach B, Grassie K, Shaw MT, Olson JR, Wei M. Effect of hydroxyapatite concentration on high-modulus composite for biodegradable bone-fixation devices. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. PMID 27300308 DOI: 10.1002/Jbm.B.33713 |
0.306 |
|
| 2015 |
Sun SP, Wei M, Olson JR, Shaw MT. A modified pultrusion process for preparing composites reinforced with continuous fibers and aligned hydroxyapatite nano needles Polymer Composites. 36: 931-938. DOI: 10.1002/Pc.23013 |
0.367 |
|
| 2013 |
Charles LF, Kramer ER, Shaw MT, Olson JR, Wei M. Self-reinforced composites of hydroxyapatite-coated PLLA fibers: fabrication and mechanical characterization. Journal of the Mechanical Behavior of Biomedical Materials. 17: 269-77. PMID 23127637 DOI: 10.1016/J.Jmbbm.2012.09.007 |
0.376 |
|
| 2013 |
Peng F, Shaw MT, Olson JR, Wei M. Influence of surface treatment and biomimetic hydroxyapatite coating on the mechanical properties of hydroxyapatite/poly(L-lactic acid) fibers. Journal of Biomaterials Applications. 27: 641-9. PMID 22274879 DOI: 10.1177/0885328211419873 |
0.35 |
|
| 2013 |
Swanson BJ, Malla RB, Shaw MT. Laboratory testing, field installation, and monitoring of a silicone foam sealant for bridge expansion joints Journal of Bridge Engineering. 18: 758-767. DOI: 10.1061/(Asce)Be.1943-5592.0000425 |
0.301 |
|
| 2013 |
Subramanian C, Weiss RA, Shaw MT. Fabrication and Characterization of Conductive Nanofiber-Based Composite Membranes Industrial & Engineering Chemistry Research. 52: 15088-15093. DOI: 10.1021/Ie402072E |
0.621 |
|
| 2013 |
Naik S, Malla R, Shaw M, Chaudhuri B. Investigation of comminution in a Wiley Mill: Experiments and DEM Simulations Powder Technology. 237: 338-354. DOI: 10.1016/J.Powtec.2012.12.019 |
0.325 |
|
| 2012 |
Sun SP, Wei M, Olson JR, Shaw MT. Biodegradable composites with aligned hydroxyapatite nanoneedles. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 100: 1817-25. PMID 22821763 DOI: 10.1002/Jbm.B.32749 |
0.31 |
|
| 2012 |
Subramanian C, Giotto M, Weiss RA, Shaw MT. Chemical Cross-Linking of Highly Sulfonated Polystyrene Electrospun Fibers Macromolecules. 45: 3104-3111. DOI: 10.1021/Ma202385G |
0.595 |
|
| 2011 |
Malla RB, Shrestha MR, Shaw MT, Brijmohan SB. Temperature Aging, Compression Recovery, Creep, and Weathering of a Foam Silicone Sealant for Bridge Expansion Joints Journal of Materials in Civil Engineering. 23: 287-297. DOI: 10.1061/(Asce)Mt.1943-5533.0000166 |
0.334 |
|
| 2011 |
Peng F, Shaw MT, Olson JR, Wei M. Hydroxyapatite Needle-Shaped Particles/Poly(l-lactic acid) Electrospun Scaffolds with Perfect Particle-along-Nanofiber Orientation and Significantly Enhanced Mechanical Properties The Journal of Physical Chemistry C. 115: 15743-15751. DOI: 10.1021/Jp201384Q |
0.362 |
|
| 2011 |
Yusoff NIM, Shaw MT, Airey GD. Modelling the linear viscoelastic rheological properties of bituminous binders Construction and Building Materials. 25: 2171-2189. DOI: 10.1016/J.Conbuildmat.2010.11.086 |
0.31 |
|
| 2011 |
Ling GH, Shaw MT. Interparticle interaction and gel characterization of PE microgels using small- and large-strain viscoelastic response Rheologica Acta. 50: 243-255. DOI: 10.1007/S00397-011-0536-3 |
0.716 |
|
| 2010 |
Charles LF, Shaw MT, Olson JR, Wei M. Fabrication and mechanical properties of PLLA/PCL/HA composites via a biomimetic, dip coating, and hot compression procedure. Journal of Materials Science. Materials in Medicine. 21: 1845-54. PMID 20238147 DOI: 10.1007/S10856-010-4051-3 |
0.351 |
|
| 2010 |
Subramanian C, Weiss R, Shaw MT. Electrospinning and characterization of highly sulfonated polystyrene fibers Polymer. 51: 1983-1989. DOI: 10.1016/J.Polymer.2010.02.052 |
0.589 |
|
| 2010 |
Sun S, Wei M, Olson JR, Shaw MT. Rheological behavior of needle-like hydroxyapatite nano-particle suspensions Rheologica Acta. 50: 65-74. DOI: 10.1007/S00397-010-0508-Z |
0.368 |
|
| 2009 |
Sun SP, Wei M, Olson JR, Shaw MT. Alkali etching of a poly(lactide) fiber. Acs Applied Materials & Interfaces. 1: 1572-8. PMID 20355963 DOI: 10.1021/Am900227F |
0.341 |
|
| 2009 |
Ling GH, Shaw MT. Crystalline crosslinked microparticles from immiscible blends of polyethylene and polystyrene Polymer. 50: 4917-4925. DOI: 10.1016/J.Polymer.2009.08.003 |
0.73 |
|
| 2008 |
Kothapalli CR, Wei M, Shaw MT. Solvent-specific gel-like transition via complexation of polyelectrolyte and nanoparticles suspended in - mixtures: a rheological study. Soft Matter. 4: 600-605. PMID 32907227 DOI: 10.1039/B713331F |
0.414 |
|
| 2008 |
Kothapalli CR, Shaw MT, Olson JR, Wei M. Fabrication of novel calcium phosphate/poly(lactic acid) fiber composites. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 84: 89-97. PMID 17455279 DOI: 10.1002/Jbm.B.30848 |
0.344 |
|
| 2008 |
Ramani V, Swier S, Shaw MT, Weiss RA, Kunz HR, Fenton JM. Membranes and MEAs Based on Sulfonated Poly(ether ketone ketone) and Heteropolyacids for Polymer Electrolyte Fuel Cells Journal of the Electrochemical Society. 155: B532. DOI: 10.1149/1.2898171 |
0.313 |
|
| 2008 |
Gasa JV, Weiss R, Shaw MT. Structured polymer electrolyte blends based on sulfonated polyetherketoneketone (SPEKK) and a poly(ether imide) (PEI) Journal of Membrane Science. 320: 215-223. DOI: 10.1016/J.Memsci.2008.03.075 |
0.397 |
|
| 2008 |
Ling GH, Shaw MT. Reversible thermal gelation of soft semi-crystalline polyethylene microparticles with surface interactions in squalane Polymer Engineering & Science. 48: 329-335. DOI: 10.1002/Pen.20933 |
0.746 |
|
| 2007 |
Malla RB, Shaw MT, Shrestha MR, Brijmohan SB. Development and Laboratory Analysis of Silicone Foam Sealant for Bridge Expansion Joints Journal of Bridge Engineering. 12: 438-448. DOI: 10.1061/(Asce)1084-0702(2007)12:4(438) |
0.303 |
|
| 2007 |
Gasa JV, Weiss R, Shaw MT. Ionic crosslinking of ionomer polymer electrolyte membranes using barium cations Journal of Membrane Science. 304: 173-180. DOI: 10.1016/J.Memsci.2007.07.031 |
0.376 |
|
| 2007 |
Brijmohan SB, Shaw MT. Magnetic ion-exchange nanoparticles and their application in proton exchange membranes Journal of Membrane Science. 303: 64-71. DOI: 10.1016/J.Memsci.2007.06.066 |
0.373 |
|
| 2007 |
Lavorgna M, Mensitieri G, Scherillo G, Shaw MT, Swier S, Weiss RA. Polymer blend for fuel cells based on SPEKK: Effect of cocontinuous morphology on water sorption and proton conductivity Journal of Polymer Science Part B: Polymer Physics. 45: 395-404. DOI: 10.1002/Polb.21058 |
0.355 |
|
| 2006 |
Brijmohan SB, Shaw M. Proton exchange membranes based on sulfonated crosslinked polystyrene micro particles dispersed in poly(dimethyl siloxane) Polymer. 47: 2856-2864. DOI: 10.1016/J.Polymer.2006.02.024 |
0.36 |
|
| 2006 |
Swier S, Shaw MT, Weiss R. Morphology control of sulfonated poly(ether ketone ketone) poly(ether imide) blends and their use in proton-exchange membranes Journal of Membrane Science. 270: 22-31. DOI: 10.1016/J.Memsci.2005.06.037 |
0.429 |
|
| 2006 |
Gasa JV, Boob S, Weiss R, Shaw MT. Proton-exchange membranes composed of slightly sulfonated poly(ether ketone ketone) and highly sulfonated crosslinked polystyrene particles Journal of Membrane Science. 269: 177-186. DOI: 10.1016/J.Memsci.2005.06.033 |
0.381 |
|
| 2006 |
Gasa JV, Weiss RA, Shaw MT. Influence of blend miscibility on the proton conductivity and methanol permeability of polymer electrolyte blends Journal of Polymer Science Part B: Polymer Physics. 44: 2253-2266. DOI: 10.1002/Polb.20865 |
0.373 |
|
| 2006 |
Liu Q, Shaw MT, Parnas RS, McDonnell AM. Investigation of basalt fiber composite aging behavior for applications in transportation Polymer Composites. 27: 475-483. DOI: 10.1002/Pc.20215 |
0.375 |
|
| 2005 |
Kothapalli CR, Shaw MT, Wei M. Biodegradable HA-PLA 3-D porous scaffolds: effect of nano-sized filler content on scaffold properties. Acta Biomaterialia. 1: 653-62. PMID 16701846 DOI: 10.1016/J.Actbio.2005.06.005 |
0.346 |
|
| 2005 |
Kothapalli C, Wei M, Shaw MT. Effect of Operation Conditions on HA Synthesized by the Hydrothermal Method Key Engineering Materials. 51-54. DOI: 10.4028/Www.Scientific.Net/Kem.284-286.51 |
0.343 |
|
| 2005 |
Brijmohan SB, Swier S, Weiss RA, Shaw MT. Synthesis and Characterization of Cross-linked Sulfonated Polystyrene Nanoparticles Industrial & Engineering Chemistry Research. 44: 8039-8045. DOI: 10.1021/Ie050703V |
0.349 |
|
| 2005 |
Swier S, Ramani V, Fenton JM, Kunz HR, Shaw MT, Weiss RA. Polymer blends based on sulfonated poly(ether ketone ketone) and poly(ether sulfone) as proton exchange membranes for fuel cells Journal of Membrane Science. 256: 122-133. DOI: 10.1016/J.Memsci.2005.02.013 |
0.388 |
|
| 2005 |
Swier S, Chun YS, Gasa J, Shaw MT, Weiss R. Sulfonated poly(ether ketone ketone) ionomers as proton exchange membranes Polymer Engineering & Science. 45: 1081-1091. DOI: 10.1002/Pen.20361 |
0.697 |
|
| 2005 |
Qiang L, Shaw MT, Parnas RS, McDonnell AM. Investigation of basalt fiber composite mechanical properties for applications in transportation International Sampe Technical Conference. 2005. DOI: 10.1002/Pc.20162 |
0.346 |
|
| 2004 |
Liu Z, Shaw MT, Hsiao BS. Ordering kinetics of body-centered-cubic morphology in diblock copolymer solutions at low temperatures Journal of Rheology. 48: 1389-1405. DOI: 10.1122/1.1807842 |
0.598 |
|
| 2004 |
Liu Z, Shaw M, Hsiao BS. Ordering Kinetics of the BCC Morphology in Diblock Copolymer Solutions over a Wide Temperature Range Macromolecules. 37: 9880-9888. DOI: 10.1021/Ma0484330 |
0.596 |
|
| 2004 |
Swier S, Gasa J, Shaw MT, Weiss RA. Sulfonation Reaction Kinetics of Poly(ether ketone ketone) (PEKK) Using a Mixture of Concentrated and Fuming Sulfuric Acid Industrial & Engineering Chemistry Research. 43: 6948-6954. DOI: 10.1021/Ie049478S |
0.662 |
|
| 2004 |
Kothapalli C, Wei M, Vasiliev A, Shaw M. Influence of temperature and concentration on the sintering behavior and mechanical properties of hydroxyapatite Acta Materialia. 52: 5655-5663. DOI: 10.1016/J.Actamat.2004.08.027 |
0.386 |
|
| 2004 |
Xu T, Shaw MT, Weiss RA. Rheo-optical studies of the effect of shear flow on the structure of elastomer blends Journal of Polymer Science Part B: Polymer Physics. 42: 1725-1738. DOI: 10.1002/Polb.20049 |
0.341 |
|
| 2004 |
Liu Z, Chattopadhyay S, Shaw MT, Hsiao BS. Anomalous rheology in a nanostructured diblock copolymer/hydrocarbon system and its kinetic origin Journal of Polymer Science Part B: Polymer Physics. 42: 1496-1505. DOI: 10.1002/Polb.20022 |
0.614 |
|
| 2003 |
An Y, Shaw MT. Actuating properties of soft gels with ordered iron particles: Basis for a shear actuator Smart Materials and Structures. 12: 157-163. DOI: 10.1088/0964-1726/12/2/301 |
0.346 |
|
| 2002 |
An Y, Liu B, Shaw MT. Soft Gels With Ordered Iron Particles: Fabrication And Electrorheological Response International Journal of Modern Physics B. 16: 2440-2446. DOI: 10.1142/S0217979202012487 |
0.335 |
|
| 2002 |
Cua EC, Shaw MT. Using creeping squeeze flow to obtain low-frequency linear viscoelastic properties: Low-shear rate measurements on polydimethylsiloxane Journal of Rheology. 46: 817-830. DOI: 10.1122/1.1487368 |
0.343 |
|
| 2001 |
Liu B, Shaw MT. Electrorheology of filled silicone elastomers Journal of Rheology. 45: 641-657. DOI: 10.1122/1.1366716 |
0.321 |
|
| 2000 |
Senador AE, Shaw MT, Mather PT. Electrospinning of Polymeric Nanofibers: Analysis of Jet Formation Mrs Proceedings. 661. DOI: 10.1557/Proc-661-Kk5.9 |
0.382 |
|
| 2000 |
Hong Z, Shaw MT, Weiss RA. Structure Evolution and Phase Behavior of Polymer Blends Under the Influence of Shear Polymer. 41: 5895-5902. DOI: 10.1016/S0032-3861(99)00774-0 |
0.372 |
|
| 2000 |
Bliznakov ED, White CC, Shaw MT. Mechanical properties of blends of HDPE and recycled urea‐formaldehyde resin Journal of Applied Polymer Science. 77: 3220-3227. DOI: 10.1002/1097-4628(20000929)77:14<3220::Aid-App250>3.0.Co;2-4 |
0.392 |
|
| 1998 |
Liu Y, Shaw MT, Tuminello WH. Response to “Comment on ‘Obtaining molecular-weight distribution information from the viscosity data of linear polymer melts’ ” [J. Rheol. 42, 1555–1562 (1998)] Journal of Rheology. 42: 1563-1564. DOI: 10.1122/1.550969 |
0.31 |
|
| 1998 |
Kanu RC, Shaw MT. Enhanced electrorheological fluids using anisotropic particles Journal of Rheology. 42: 657-670. DOI: 10.1122/1.550944 |
0.327 |
|
| 1998 |
Hong Z, Shaw MT, Weiss RA. Effect of Shear Flow on the Morphology and Phase Behavior of a Near-Critical SAN/PMMA Blend Macromolecules. 31: 6211-6216. DOI: 10.1021/Ma980637R |
0.349 |
|
| 1997 |
Remediakis NG, Weiss R, Shaw MT. Phase Structure Changes in a Sheared Blend of High Molecular Weight Polybutadiene and Polyisoprene Elastomers Rubber Chemistry and Technology. 70: 71-89. DOI: 10.5254/1.3538420 |
0.349 |
|
| 1997 |
Qi M, Shaw MT. Sedimentation-resistant electrorheological fluids based on PVAL-coated microballoons Journal of Applied Polymer Science. 65: 539-547. DOI: 10.1002/(Sici)1097-4628(19970718)65:3<539::Aid-App13>3.0.Co;2-S |
0.302 |
|
| 1996 |
KANU RC, SHAW MT. STUDIES OF ER FLUIDS FEATURING RODLIKE PARTICLES International Journal of Modern Physics B. 10: 2925-2932. DOI: 10.1142/S0217979296001379 |
0.331 |
|
| 1995 |
Chen ZJ, Wu RJ, Shaw MT, Weiss R, Fernandez ML, Higgins JS. Rheo-Optical Behavior of Binary Polymer Blends: The Effect of Simple Shear Flow on Phase Behavior Polymer Engineering and Science. 35: 92-99. DOI: 10.1002/Pen.760350112 |
0.37 |
|
| 1994 |
Riaya A, Shaw MT, Garton A. Oxidation of Elastomers in Aqueous Environments Rubber Chemistry and Technology. 67: 775-785. DOI: 10.5254/1.3538709 |
0.332 |
|
| 1991 |
Jackson CL, Shaw MT, Aubert JH. The linear elastic properties of microcellular foams Polymer. 32: 221-225. DOI: 10.1016/0032-3861(91)90005-4 |
0.343 |
|
| 1990 |
Jackson CL, Shaw MT. The phase behaviour and gelation of a rod-like polymer in solution and implications for microcellular foam morphology Polymer. 31: 1070-1084. DOI: 10.1016/0032-3861(90)90255-W |
0.367 |
|
| 1989 |
Boo H, Shaw MT. Gelation and interaction in plasticizer/PVC solutions Journal of Vinyl & Additive Technology. 11: 176-179. DOI: 10.1002/Vnl.730110407 |
0.308 |
|
| 1988 |
Hsiao BS, Shaw MT, Samulski ET. The Effects of Temperature and Pressure on the Dynamic Longitudinal Volume Viscosity of Two Model Polymers Journal of Rheology. 32: 533-553. DOI: 10.1122/1.550000 |
0.349 |
|
| 1988 |
Hsiao BS, Shaw MT, Samulski ET. Pressure-induced phases in a thermotropic polyester Macromolecules. 21: 543-545. DOI: 10.1021/Ma00180A053 |
0.315 |
|
| 1988 |
Boo H, Shaw MT. Application of the UNIFAC-FV group contribution method to the prediction of relative compatibility of plasticizers with PVC Journal of Vinyl and Additive Technology. 10: 77-83. DOI: 10.1002/Vnl.730100207 |
0.315 |
|
| 1987 |
Boo H, Shaw MT. Interaction of plasticizers with PVC: Phase behavior and thermomechanical properties of plasticized PVC Journal of Vinyl & Additive Technology. 9: 168-172. DOI: 10.1002/Vnl.730090407 |
0.309 |
|
| 1986 |
Foss PH, Shaw MT. Thermodynamic interactions and nonlinear rheological properties of plasticized polyvinyl chloride Journal of Vinyl & Additive Technology. 8: 107-111. DOI: 10.1002/Vnl.730080305 |
0.316 |
|
| 1985 |
Bandyopadhyay PK, Shaw MT, Weiss RA. Detection and Analysis of Aging and Degradation of Polyolefins: A Review of Methodologies Polymer-Plastics Technology and Engineering. 24: 187-241. DOI: 10.1080/03602558508070065 |
0.328 |
|
| 1984 |
Somani RH, Shaw MT. Liquid‐liquid equilibria in polymer blends–molecular weight effects Polymer Engineering and Science. 24: 601-607. DOI: 10.1002/Pen.760240812 |
0.334 |
|
| 1983 |
Cangelosi F, Shaw MT. Hydrogen bonding in polymer systems Polymer Engineering and Science. 23: 669-675. DOI: 10.1002/Pen.760231206 |
0.346 |
|
| 1982 |
Bandyopadhyay PK, Shaw MT. High damping poly (vinyl chloride)/polyurethane blends by tailoring the molecular structure of polycaprolactone-based polyurethanes Journal of Vinyl and Additive Technology. 4: 142-145. DOI: 10.1002/Vnl.730040405 |
0.372 |
|
| 1982 |
Kanu RC, Shaw MT. Rheology of polymer blends: Simultaneous slippage and entrance pressure loss in the ethylene‐propylene‐diene (EPDM)/viton system Polymer Engineering and Science. 22: 507-511. DOI: 10.1002/Pen.760220809 |
0.369 |
|
| 1982 |
Shaw MT. Processing and commercial application of polymer blends Polymer Engineering and Science. 22: 115-123. DOI: 10.1002/Pen.760220212 |
0.318 |
|
| 1982 |
Bandyopadhyay PK, Shaw MT. Viscoelastic and engineering properties of poly(vinyl chloride) plasticized with polycaprolactone-based polyurethanes Journal of Applied Polymer Science. 27: 4323-4335. DOI: 10.1002/App.1982.070271122 |
0.415 |
|
| Show low-probability matches. |