| Year |
Citation |
Score |
| 2018 |
Hosemann P, Frazer D, Fratoni M, Bolind A, Ashby MF. Materials selection for nuclear applications: Challenges and opportunities Scripta Materialia. 143: 181-187. DOI: 10.1016/J.Scriptamat.2017.04.027 |
0.347 |
|
| 2013 |
Allwood JM, Ashby MF, Gutowski TG, Worrell E. Material efficiency: providing material services with less material production. Philosophical Transactions. Series a, Mathematical, Physical, and Engineering Sciences. 371: 20120496. PMID 23359746 DOI: 10.1098/Rsta.2012.0496 |
0.344 |
|
| 2013 |
Gutowski TG, Sahni S, Allwood JM, Ashby MF, Worrell E. The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand. Philosophical Transactions. Series a, Mathematical, Physical, and Engineering Sciences. 371: 20120003. PMID 23359744 DOI: 10.1098/Rsta.2012.0003 |
0.331 |
|
| 2013 |
Ashby M. Mapping the fracture properties of engineering materials Philosophical Magazine. 93: 3878-3892. DOI: 10.1080/14786435.2013.794983 |
0.319 |
|
| 2013 |
Ashby M. Designing architectured materials Scripta Materialia. 68: 4-7. DOI: 10.1016/J.Scriptamat.2012.04.033 |
0.379 |
|
| 2013 |
Ashby M, Cope E, Cebon D. Materials Selection for Engineering Design Informatics For Materials Science and Engineering: Data-Driven Discovery For Accelerated Experimentation and Application. 219-244. DOI: 10.1016/B978-0-12-394399-6.00010-2 |
0.544 |
|
| 2012 |
Monroy Aceves C, Sutcliffe MPF, Ashby MF, Skordos AA, Rodríguez Román C. Design methodology for composite structures: A small low air-speed wind turbine blade case study Materials and Design. 36: 296-305. DOI: 10.1016/J.Matdes.2011.11.033 |
0.331 |
|
| 2011 |
Ashby M. Hybrid materials to expand the boundaries of material-property space Journal of the American Ceramic Society. 94: S3-S14. DOI: 10.1111/J.1551-2916.2011.04559.X |
0.388 |
|
| 2011 |
Allwood JM, Ashby MF, Gutowski TG, Worrell E. Material efficiency: A white paper Resources, Conservation and Recycling. 55: 362-381. DOI: 10.1016/J.Resconrec.2010.11.002 |
0.36 |
|
| 2010 |
Fleck NA, Deshpande VS, Ashby MF. Micro-architectured materials: Past, present and future Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 466: 2495-2516. DOI: 10.1098/Rspa.2010.0215 |
0.545 |
|
| 2010 |
Nachum S, Fleck NA, Ashby MF, Colella A, Matteazzi P. The microstructural basis for the mechanical properties and electrical resistivity of nanocrystalline Cu-Al2O3 Materials Science and Engineering A. 527: 5065-5071. DOI: 10.1016/J.Msea.2010.04.070 |
0.326 |
|
| 2008 |
Ashby M. Materials–a brief history Philosophical Magazine Letters. 88: 749-755. DOI: 10.1080/09500830802047056 |
0.32 |
|
| 2006 |
Ashby MF. The properties of foams and lattices. Philosophical Transactions. Series a, Mathematical, Physical, and Engineering Sciences. 364: 15-30. PMID 18272451 DOI: 10.1098/Rsta.2005.1678 |
0.369 |
|
| 2006 |
Cebon D, Ashby MF. Engineering Materials Informatics Mrs Bulletin. 31: 1004-1012. DOI: 10.1557/Mrs2006.229 |
0.574 |
|
| 2006 |
Ashby MF, Greer AL. Metallic glasses as structural materials Scripta Materialia. 54: 321-326. DOI: 10.1016/J.Scriptamat.2005.09.051 |
0.358 |
|
| 2006 |
Sirisalee P, Ashby MF, Parks GT, Clarkson PJ. Multi-criteria material selection of monolithic and multi-materials in engineering design Advanced Engineering Materials. 8: 48-56. DOI: 10.1002/Adem.200500196 |
0.363 |
|
| 2005 |
Ashby MF. Hybrids to fill holes in material property space Philosophical Magazine. 85: 3235-3257. DOI: 10.1080/14786430500079892 |
0.372 |
|
| 2005 |
Maine E, Probert D, Ashby M. Investing in new materials: a tool for technology managers Technovation. 25: 15-23. DOI: 10.1016/S0166-4972(03)00070-1 |
0.331 |
|
| 2004 |
Wegst UGK, Ashby MF. The mechanical efficiency of natural materials Philosophical Magazine. 84: 2167-2181. DOI: 10.1080/14786430410001680935 |
0.409 |
|
| 2004 |
Salimon AI, Ashby MF, Bréchet Y, Greer AL. Bulk metallic glasses: What are they good for? Materials Science and Engineering A. 375: 385-388. DOI: 10.1016/J.Msea.2003.10.167 |
0.371 |
|
| 2004 |
Esawi AMK, Ashby MF. Computer-based selection of joining processes: Methods, software and case studies Materials & Design. 25: 555-564. DOI: 10.1016/J.Matdes.2004.03.002 |
0.336 |
|
| 2004 |
Salimon A A, Bréchet Y, Ashby MF, Greer AL. Selection of applications for a material Advanced Engineering Materials. 6: 249-265. DOI: 10.1002/Adem.200400002 |
0.341 |
|
| 2004 |
Sirisalee P, Ashby MF, Parks GT, Clarkson PJ. Multi-criteria material selection in engineering design Advanced Engineering Materials. 6: 84-92. DOI: 10.1002/Adem.200300554 |
0.341 |
|
| 2003 |
Ashby MF, Lu T. Metal foams: A survey Science China-Chemistry. 46: 521-532. DOI: 10.1360/02Yb0203 |
0.344 |
|
| 2003 |
Fleck N, Ashby M, Hutchinson J. The role of geometrically necessary dislocations in giving material strengthening Scripta Materialia. 48: 179-183. DOI: 10.1016/S1359-6462(02)00338-X |
0.316 |
|
| 2003 |
Ashby MF, Bréchet YJM. Designing hybrid materials Acta Materialia. 51: 5801-5821. DOI: 10.1016/S1359-6454(03)00441-5 |
0.379 |
|
| 2003 |
Esawi AMK, Ashby MF. Cost estimates to guide pre-selection of processes Materials & Design. 24: 605-616. DOI: 10.1016/S0261-3069(03)00136-5 |
0.301 |
|
| 2002 |
Gandin C-, Bréchet Y, Rappaz M, Canova G, Ashby M, Shercliff H. Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys Acta Materialia. 50: 901-927. DOI: 10.1016/S1359-6454(01)00376-7 |
0.325 |
|
| 2002 |
Ashby MF, Bréchet YJM, Cebon D, Salvo L. Selection strategies for materials and processes Materials & Design. 25: 51-67. DOI: 10.1016/S0261-3069(03)00159-6 |
0.609 |
|
| 2002 |
Maine EMA, Ashby MF. Applying the investment methodology for materials (IMM) to aluminium foams Materials & Design. 23: 307-319. DOI: 10.1016/S0261-3069(01)00056-5 |
0.337 |
|
| 2002 |
Maine EMA, Ashby MF. An investment methodology for materials Materials & Design. 23: 297-306. DOI: 10.1016/S0261-3069(01)00055-3 |
0.323 |
|
| 2002 |
Ashby MF, Evans A, Fleck NA, Gibson LJ, Hutchinson JW, Wadley HNG. Metal foams: a design guide - Butterworth-Heinemann, Oxford, UK, ISBN 0-7506-7219-6, Published 2000, Hardback, 251 pp., $75.00 Materials & Design. 23: 119. DOI: 10.1016/S0261-3069(01)00049-8 |
0.536 |
|
| 2002 |
Johnson KW, Langdon PM, Ashby MF. Grouping materials and processes for the designer: an application of cluster analysis Materials & Design. 23: 1-10. DOI: 10.1016/S0261-3069(01)00035-8 |
0.32 |
|
| 2002 |
Chen C, Fleck NA, Ashby MF. Creep response of sandwich beams with a metallic foam core Advanced Engineering Materials. 4: 777-780. DOI: 10.1002/1527-2648(20021014)4:10<777::Aid-Adem777>3.0.Co;2-A |
0.338 |
|
| 2002 |
Lemoine P, Maldjian JM, Brechet Y, Ashby MF, Salvo L. A Methodology to Select Polymers for Creep Application Advanced Engineering Materials. 4: 384-388. DOI: 10.1002/1527-2648(20020605)4:6<384::Aid-Adem384>3.0.Co;2-B |
0.328 |
|
| 2002 |
Wegst UGK, Ashby MF. Materials selection and design of products with low environmental impact Advanced Engineering Materials. 4: 378-383. DOI: 10.1002/1527-2648(20020605)4:6<378::Aid-Adem378>3.0.Co;2-# |
0.329 |
|
| 2002 |
Landru D, Brechet Y, Ashby MF. Finding applications for materials Advanced Engineering Materials. 4: 343-349. DOI: 10.1002/1527-2648(20020605)4:6<343::Aid-Adem343>3.0.Co;2-V |
0.365 |
|
| 2002 |
Ashby MF, Brechet Y. Materials selection for a finite life time Advanced Engineering Materials. 4: 335-341. DOI: 10.1002/1527-2648(20020605)4:6<335::Aid-Adem335>3.0.Co;2-R |
0.345 |
|
| 2001 |
Deshpande VS, Ashby MF, Fleck NA. Foam Topology Bending Versus Stretching Dominated Architectures Acta Materialia. 49: 1035-1040. DOI: 10.1016/S1359-6454(00)00379-7 |
0.483 |
|
| 2001 |
Evans AG, Hutchinson JW, Fleck NA, Ashby MF, Wadley HNG. The topological design of multifunctional cellular metals Progress in Materials Science. 46: 309-327. DOI: 10.1016/S0079-6425(00)00016-5 |
0.379 |
|
| 2001 |
Ashby MF. Drivers for material development in the 21st century Progress in Materials Science. 46: 191-199. DOI: 10.1016/S0079-6425(00)00014-1 |
0.342 |
|
| 2001 |
Fleck NA, Olurin OB, Chen C, Ashby MF. The effect of hole size upon the strength of metallic and polymeric foams Journal of the Mechanics and Physics of Solids. 49: 2015-2030. DOI: 10.1016/S0022-5096(01)00033-3 |
0.312 |
|
| 2001 |
Deshpande VS, Fleck NA, Ashby MF. Effective properties of the octet-truss lattice material Journal of the Mechanics and Physics of Solids. 49: 1747-1769. DOI: 10.1016/S0022-5096(01)00010-2 |
0.541 |
|
| 2000 |
Cocks ACF, Ashby MF. Creep-Buckling Of Cellular Solids Acta Materialia. 48: 3395-3400. DOI: 10.1016/S1359-6454(00)00139-7 |
0.332 |
|
| 2000 |
Olurin OB, Fleck NA, Ashby MF. Deformation and fracture of aluminium foams Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 291: 136-146. DOI: 10.1016/S0921-5093(00)00954-0 |
0.345 |
|
| 2000 |
Ashby MF, Maine EMA. Design Aspects of Metal Matrix Composite Usage Comprehensive Composite Materials. 3: 779-795. DOI: 10.1016/B978-0-12-803581-8.09980-X |
0.386 |
|
| 2000 |
Harte A, Fleck NA, Ashby MF. Sandwich Panel Design Using Aluminum Alloy Foam Advanced Engineering Materials. 2: 219-222. DOI: 10.1002/(Sici)1527-2648(200004)2:4<219::Aid-Adem219>3.0.Co;2-# |
0.321 |
|
| 1999 |
Ashby MF, Humphreys FJ, Sellars CM, Shercliff HR, Stowell MJ. Introduction to Deformation processing of metals. A Discussion Meeting held at the Royal Society on 21 and 22 October 1998 Philosophical Transactions of the Royal Society A. 357: 1443-1445. DOI: 10.1098/Rsta.1999.0383 |
0.313 |
|
| 1999 |
Andrews EW, Gibson LJ, Ashby MF. The creep of cellular solids Acta Materialia. 47: 2853-2863. DOI: 10.1016/S1359-6454(99)00150-0 |
0.589 |
|
| 1999 |
McCullough KYG, Fleck NA, Ashby MF. Uniaxial stress–strain behaviour of aluminium alloy foams Acta Materialia. 47: 2323-2330. DOI: 10.1016/S1359-6454(99)00128-7 |
0.343 |
|
| 1999 |
McCullough KYG, Fleck NA, Ashby MF. Toughness Of Aluminium Alloy Foams Acta Materialia. 47: 2331-2343. DOI: 10.1016/S1359-6454(99)00125-1 |
0.317 |
|
| 1999 |
Harte A-, Fleck NA, Ashby MF. Fatigue failure of an open cell and a closed cell aluminium alloy foam Acta Materialia. 47: 2511-2524. DOI: 10.1016/S1359-6454(99)00097-X |
0.338 |
|
| 1998 |
Bassetti D, Brechet Y, Ashby MF. Estimates for material properties II: the method of multiple correlations Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 454: 1323-1336. DOI: 10.1098/Rspa.1998.0209 |
0.326 |
|
| 1998 |
Ashby MF. Checks and estimates for material properties. I. Ranges and simple correlations Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 454: 1301-1321. DOI: 10.1098/Rspa.1998.0208 |
0.342 |
|
| 1998 |
Evans AG, Hutchinson JW, Ashby MF. Multifunctionality of cellular metal systems Progress in Materials Science. 43: 171-221. DOI: 10.1016/S0079-6425(98)00004-8 |
0.345 |
|
| 1997 |
Ashby MF. Materials Selection: Multiple Constraints and Compound Objectives Astm Special Technical Publications. 45-62. DOI: 10.1520/Stp13762S |
0.369 |
|
| 1997 |
Wood JT, Embury JD, Ashby MF. An approach to materials processing and selection for high-field magnet design Acta Materialia. 45: 1099-1104. DOI: 10.1016/S1359-6454(96)00220-0 |
0.353 |
|
| 1997 |
Weaver PM, Ashby M. Material limits for shape efficiency Progress in Materials Science. 41: 61-128. DOI: 10.1016/S0079-6425(97)00034-0 |
0.346 |
|
| 1996 |
Weaver PM, Ashby MF. The optimal selection of material and section-shape Journal of Engineering Design. 7: 129-150. DOI: 10.1080/09544829608907932 |
0.356 |
|
| 1996 |
Poole WJ, Ashby MF, Fleck NA. Micro-hardness of annealed and work-hardened copper polycrystals Scripta Materialia. 34: 559-564. DOI: 10.1016/1359-6462(95)00524-2 |
0.36 |
|
| 1996 |
Turner CD, Ashby MF. The cold isostatic pressing of composite powders—I. Experimental investigations using model powders Acta Materialia. 44: 4521-4530. DOI: 10.1016/1359-6454(96)00064-X |
0.309 |
|
| 1996 |
Weaver PM, Ashby MF, Burgess S, Shibaike N. Selection of materials to reduce environmental impact: a case study on refrigerator insulation Materials & Design. 17: 11-17. DOI: 10.1016/0261-3069(96)00024-6 |
0.315 |
|
| 1996 |
Ashby MF. Modelling of materials problems Journal of Computer-Aided Materials Design. 3: 95-99. DOI: 10.1007/Bf01185642 |
0.322 |
|
| 1995 |
Gibson LJ, Ashby MF, Karam GN, Wegst U, Shercliff HR. The mechanical properties of natural materials. II. Microstructures for mechanical efficiency Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 450: 141-162. DOI: 10.1098/Rspa.1995.0076 |
0.416 |
|
| 1995 |
Ashby MF, Gibson LJ, Wegst U, Olive R. The Mechanical Properties of Natural Materials. I. Material Property Charts Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 450: 123-140. DOI: 10.1098/Rspa.1995.0075 |
0.611 |
|
| 1995 |
Lahaie DJ, Embury JD, Ashby MF. Scale dependent composite design charts Scripta Metallurgica Et Materialia. 32: 133-138. DOI: 10.1016/S0956-716X(99)80025-9 |
0.307 |
|
| 1995 |
Ashby MF. Materials, Bicycles, and Design Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 26: 3057-3064. DOI: 10.1007/Bf02669435 |
0.369 |
|
| 1995 |
Ashby MF. Materials, bicycles, and design Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 26: 1101-1108. DOI: 10.1007/Bf02653994 |
0.369 |
|
| 1994 |
Shercliff HR, Ashby MF. Design with metal matrix composites Materials Science and Technology. 10: 443-451. DOI: 10.1179/Mst.1994.10.6.443 |
0.388 |
|
| 1994 |
Fleck NA, Kang KJ, Ashby MF. Overview no. 112: The cyclic properties of engineering materials Acta Metallurgica Et Materialia. 42: 365-381. DOI: 10.1016/0956-7151(94)90493-6 |
0.35 |
|
| 1994 |
Abel CA, Edwards KL, Ashby MF. Materials, processing and the environment in engineering design: The issues Materials and Design. 15: 179-193. DOI: 10.1016/0261-3069(94)90002-7 |
0.33 |
|
| 1994 |
Zhang J, Ashby MF. Mechanical selection of foams and honeycombs used for packaging and energy absorption Journal of Materials Science. 29: 157-163. DOI: 10.1007/Bf00356587 |
0.374 |
|
| 1993 |
Ashby MF. Materials in Mechanical Design Mrs Bulletin. 18: 43-53. DOI: 10.1557/S0883769400037520 |
0.375 |
|
| 1993 |
Ashby MF. Criteria for selecting the components of composites Acta Metallurgica Et Materialia. 41: 1313-1335. DOI: 10.1016/0956-7151(93)90242-K |
0.341 |
|
| 1993 |
Sharp SJ, Ashby MF, Fleck NA. Material response under static and sliding indentation loads Acta Metallurgica Et Materialia. 41: 685-692. DOI: 10.1016/0956-7151(93)90002-A |
0.378 |
|
| 1993 |
Vekinis G, Ashby MF, Shercliff H, Beaumont PWR. The micromechanisms of fracture of alumina and a ceramic-based fibre composite: Modelling the failure processes Composites Science and Technology. 48: 325-330. DOI: 10.1016/0266-3538(93)90150-F |
0.315 |
|
| 1993 |
Vekinis G, Ashby MF, Beaumont PWR. Plaster of Paris as a model material for brittle porous solids Journal of Materials Science. 28: 3221-3227. DOI: 10.1007/Bf00354239 |
0.409 |
|
| 1992 |
Ion J, Shercliff HR, Ashby MF. Diagrams for laser materials processing Acta Metallurgica Et Materialia. 40: 1539-1551. DOI: 10.1016/0956-7151(92)90097-X |
0.306 |
|
| 1992 |
Zhang J, Ashby M. Buckling of honeycombs under in-plane biaxial stresses International Journal of Mechanical Sciences. 34: 491-509. DOI: 10.1016/0020-7403(92)90014-8 |
0.312 |
|
| 1992 |
Zhang J, Ashby M. The out-of-plane properties of honeycombs International Journal of Mechanical Sciences. 34: 475-489. DOI: 10.1016/0020-7403(92)90013-7 |
0.34 |
|
| 1992 |
Flores M, Rosa ME, Barlow CY, Fortes MA, Ashby MF. Properties and uses of consolidated cork dust Journal of Materials Science. 27: 5629-5634. DOI: 10.1007/Bf00541634 |
0.35 |
|
| 1992 |
Ashby MF. Materials and the environment Physica Status Solidi (a). 131: 625-638. DOI: 10.1002/Pssa.2211310233 |
0.357 |
|
| 1991 |
Ashby MF. Overview No. 92: Materials and shape Acta Metallurgica Et Materialia. 39: 1025-1039. DOI: 10.1016/0956-7151(91)90189-8 |
0.383 |
|
| 1991 |
Vekinis G, Ashby MF, Beaumont PWR. The compressive failure of alumina containing controlled distributions of flaws Acta Metallurgica Et Materialia. 39: 2583-2588. DOI: 10.1016/0956-7151(91)90073-A |
0.318 |
|
| 1991 |
Bannister M, Ashby MF. The deformation and fracture of constrained metal sheets Acta Metallurgica Et Materialia. 39: 2575-2582. DOI: 10.1016/0956-7151(91)90072-9 |
0.332 |
|
| 1991 |
Kortschot MT, Beaumont PWR, Ashby MF. Damage mechanics of composite materials. III: Prediction of damage growth and notched strength Composites Science and Technology. 40: 147-165. DOI: 10.1016/0266-3538(91)90094-6 |
0.334 |
|
| 1990 |
Zhang J, Ashby MF. Optimal Selection of Foams and Honeycombs in Packaging Design Mrs Proceedings. 207. DOI: 10.1557/Proc-207-235 |
0.348 |
|
| 1990 |
Vekinis G, Ashby MF, Beaumont PWR. R-curve behaviour of Al2O3 ceramics Acta Metallurgica Et Materialia. 38: 1151-1162. DOI: 10.1016/0956-7151(90)90188-M |
0.326 |
|
| 1990 |
Ganczakowski HL, Ashby MF, Beaumont PWR, Smith PA. The behaviour of Kevlar fibre-epoxy laminates under static and fatigue loading—Part 2: Modelling Composites Science and Technology. 37: 371-392. DOI: 10.1016/0266-3538(90)90010-3 |
0.315 |
|
| 1990 |
Ashby MF, Sammis CG. The damage mechanics of brittle solids in compression Pure and Applied Geophysics Pageoph. 133: 489-521. DOI: 10.1007/Bf00878002 |
0.322 |
|
| 1989 |
Ashby MF. Materials selection in conceptual design Materials Science and Technology. 5: 517-525. DOI: 10.1179/Mst.1989.5.6.517 |
0.379 |
|
| 1989 |
Triantafillou TC, Zhang J, Shercliff TL, Gibson LJ, Ashby MF. Failure surfaces for cellular materials under multiaxial loads—II. Comparison of models with experiment International Journal of Mechanical Sciences. 31: 665-678. DOI: 10.1016/S0020-7403(89)80002-5 |
0.59 |
|
| 1989 |
Gibson LJ, Ashby MF, Zhang J, Triantafillou T. Failure surfaces for cellular materials under multiaxial loads—I.Modelling International Journal of Mechanical Sciences. 31: 635-663. DOI: 10.1016/S0020-7403(89)80001-3 |
0.608 |
|
| 1989 |
Ashby MF. Overview No. 80: On the engineering properties of materials Acta Metallurgica. 37: 1273-1293. DOI: 10.1016/0001-6160(89)90158-2 |
0.387 |
|
| 1988 |
Teirlinck D, Zok F, Embury J, Ashby M. Fracture mechanism maps in stress space Acta Metallurgica. 36: 1213-1228. DOI: 10.1016/0001-6160(88)90274-X |
0.309 |
|
| 1988 |
Ahmad ZB, Ashby MF. Failure-mechanism maps for engineering polymers Journal of Materials Science. 23: 2037-2050. DOI: 10.1007/Bf01115766 |
0.327 |
|
| 1988 |
Gibson LJ, Ashby MF, Easterling KE. Structure and mechanics of the iris leaf Journal of Materials Science. 23: 3041-3048. DOI: 10.1007/Bf00551271 |
0.533 |
|
| 1987 |
Ashby MF. Technology of the 1990s: Advanced Materials and Predictive Design Philosophical Transactions - Royal Society. Mathematical, Physical and Engineering Sciences. 322: 393-407. DOI: 10.1098/Rsta.1987.0059 |
0.362 |
|
| 1986 |
Sammis CG, Ashby MF. The failure of brittle porous solids under compressive stress states Acta Metallurgica. 34: 511-526. DOI: 10.1016/0001-6160(86)90087-8 |
0.319 |
|
| 1985 |
Helle AS, Easterling KE, Ashby MF. Hot isostatic pressing diagrams : new developments Acta Metallurgica. 33: 2163-2174. DOI: 10.1016/0001-6160(85)90177-4 |
0.322 |
|
| 1984 |
Maiti SK, Gibson LJ, Ashby MF. Deformation and energy absorption diagrams for cellular solids Acta Metallurgica. 32: 1963-1975. DOI: 10.1016/0001-6160(84)90177-9 |
0.366 |
|
| 1983 |
Swinkels FB, Wilkinson DS, Arzt E, Ashby MF. Mechanisms of hot-isostatic pressing Acta Metallurgica. 31: 1829-1840. DOI: 10.1016/0001-6160(83)90129-3 |
0.52 |
|
| 1983 |
Arzt E, Ashby MF, Verrall RA. Interface controlled diffusional creep Acta Metallurgica. 31: 1977-1989. DOI: 10.1016/0001-6160(83)90015-9 |
0.488 |
|
| 1983 |
Arzt E, Ashby MF, Easterling KE. Practical applications of hotisostatic Pressing diagrams: Four case studies Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 14: 211-221. DOI: 10.1007/Bf02651618 |
0.524 |
|
| 1983 |
Ashby MF, Medalist RFM. The mechanical properties of cellular solids Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 14: 1755-1769. DOI: 10.1007/Bf02645546 |
0.402 |
|
| 1982 |
Easterling KE, Harrysson R, Gibson LJ, Ashby MF. On the mechanics of balsa and other woods Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 383: 31-41. DOI: 10.1098/Rspa.1982.0118 |
0.376 |
|
| 1982 |
Gibson LJ, Ashby MF. The mechanics of three-dimensional cellular materials Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 382: 43-59. DOI: 10.1098/Rspa.1982.0088 |
0.6 |
|
| 1982 |
Arzt E, Ashby MF. Threshold stresses in materials containing dispersed particles Scripta Metallurgica. 16: 1285-1290. DOI: 10.1016/0036-9748(82)90484-7 |
0.514 |
|
| 1982 |
Sargent PM, Ashby MF. Deformation maps for titanium and zirconium Scripta Metallurgica. 16: 1415-1422. DOI: 10.1016/0036-9748(82)90439-2 |
0.326 |
|
| 1981 |
Gibson LJ, Easterling KE, Ashby MF. The structure and mechanics of cork Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 377: 99-117. DOI: 10.1098/Rspa.1981.0117 |
0.328 |
|
| 1980 |
Kunz-Douglass S, Beaumont PWR, Ashby MF. A model for the toughness of epoxy-rubber particulate composites Journal of Materials Science. 15: 1109-1123. DOI: 10.1007/Bf00551799 |
0.315 |
|
| 1979 |
Ashby MF, Gandhi C, Taplin DMR. Overview No. 3 Fracture-mechanism maps and their construction for f.c.c. metals and alloys Acta Metallurgica. 27: 699-729. DOI: 10.1016/0001-6160(79)90105-6 |
0.33 |
|
| 1978 |
Ashby MF, Verrall RA. Micromechanisms of flow and fracture, and their relevance to the rheology of the upper mantle Philosophical Transactions of the Royal Society A. 288: 59-95. DOI: 10.1098/Rsta.1978.0006 |
0.324 |
|
| 1977 |
Verrall RA, Fields RJ, Ashby MF. Deformation-Mechanism Maps for LiF and NaCl Journal of the American Ceramic Society. 60: 211-216. DOI: 10.1111/J.1151-2916.1977.Tb14108.X |
0.345 |
|
| 1974 |
Logan J, Ashby MF. Mechanical properties of two metallic glasses Acta Metallurgica. 22: 1047-1054. DOI: 10.1016/0001-6160(74)90030-3 |
0.355 |
|
| 1973 |
Ashby MF. A first report on sintering diagrams Acta Metallurgica. 22: 275-289. DOI: 10.1016/0001-6160(74)90167-9 |
0.32 |
|
| 1972 |
Ashby MF. A first report on deformation-mechanism maps Acta Metallurgica. 20: 887-897. DOI: 10.1016/0001-6160(72)90082-X |
0.342 |
|
| 1971 |
Weaire D, Ashby MF, Logan J, Weins MJ. On the use of pair potentials to calculate the properties of amorphous metals Acta Metallurgica. 19: 779-788. DOI: 10.1016/0001-6160(71)90134-9 |
0.311 |
|
| Show low-probability matches. |