Year |
Citation |
Score |
2020 |
Duong NH, Ma J, Lei S. FEM assessment of the effects of machining parameters in vibration assisted nano impact machining of silicon by loose abrasives International Journal of Manufacturing Research. 15: 252-265. DOI: 10.1504/Ijmr.2020.10021558 |
0.31 |
|
2020 |
Cococcetta NM, Pearl D, Jahan MP, Ma J. Investigating surface finish, burr formation, and tool wear during machining of 3D printed carbon fiber reinforced polymer composite Journal of Manufacturing Processes. DOI: 10.1016/J.Jmapro.2020.04.025 |
0.307 |
|
2019 |
Hanson C, Hiwase P, Chen X, Jahan MP, Ma J, Arbuckle G. Experimental investigation and numerical simulation of burr formation in micro-milling of polycarbonates Procedia Manufacturing. 34: 293-304. DOI: 10.1016/J.Promfg.2019.06.153 |
0.361 |
|
2019 |
Liu C, Duong N, Jahan MP, Ma J, Kirwin R. Experimental investigation and numerical simulation of micro-EDM of bulk metallic glass with focus on crater sizes Procedia Manufacturing. 34: 275-286. DOI: 10.1016/J.Promfg.2019.06.151 |
0.319 |
|
2019 |
Duong N, Kore VK, Ma J, Lei S, Jahan MP, Sundaram M. Damage evolution in vibration assisted nano impact machining by loose abrasives at elevated temperatures: A numerical study Journal of Manufacturing Processes. 47: 357-366. DOI: 10.1016/J.Jmapro.2019.09.034 |
0.346 |
|
2019 |
Khatri A, Jahan MP, Ma J. Assessment of tool wear and microstructural alteration of the cutting tools in conventional and sustainable slot milling of Ti-6Al-4V alloy The International Journal of Advanced Manufacturing Technology. 105: 2799-2814. DOI: 10.1007/S00170-019-04520-5 |
0.335 |
|
2018 |
Wu H, Ma J, Lei S. FEM prediction of dislocation density and grain size evolution in high-speed machining of Al6061-T6 alloy using microgrooved cutting tools The International Journal of Advanced Manufacturing Technology. 95: 4211-4227. DOI: 10.1007/S00170-017-1476-6 |
0.332 |
|
2015 |
Ma J, Duong NH, Chang S, Lian Y, Deng J, Lei S. Assessment of Microgrooved Cutting Tool in Dry Machining of AISI 1045 Steel Journal of Manufacturing Science and Engineering-Transactions of the Asme. 137: 31001. DOI: 10.1115/1.4029565 |
0.338 |
|
2015 |
Ma J, Duong NH, Lei S. Numerical investigation of the performance of microbump textured cutting tool in dry machining of AISI 1045 steel Journal of Manufacturing Processes. 19: 194-204. DOI: 10.1016/J.Jmapro.2014.10.001 |
0.345 |
|
2015 |
Ma J, Ge X, Pelate N, Lei S. Numerical investigation of two-dimensional thermally assisted ductile regime milling of nanocrystalline hydroxyapatite bioceramic material Ceramics International. 41: 3409-3419. DOI: 10.1016/J.Ceramint.2014.10.131 |
0.372 |
|
2015 |
Ma J, Ge X, Qiu C, Lei S. FEM assessment of performance of microhole textured cutting tool in dry machining of Ti-6Al-4V International Journal of Advanced Manufacturing Technology. DOI: 10.1007/S00170-015-7918-0 |
0.338 |
|
2015 |
Ma J, Duong NH, Lei S. 3D numerical investigation of the performance of microgroove textured cutting tool in dry machining of Ti-6Al-4V The International Journal of Advanced Manufacturing Technology. 79: 1313-1323. DOI: 10.1007/S00170-015-6937-1 |
0.358 |
|
2015 |
Ma J, Andrus P, Condoor S, Lei S. Numerical investigation of effects of cutting conditions and cooling schemes on tool performance in up milling of Ti-6AL-4V alloy The International Journal of Advanced Manufacturing Technology. 78: 361-383. DOI: 10.1007/S00170-014-6637-2 |
0.339 |
|
2014 |
Ma J, Ge X, Chang SI, Lei S. Assessment of cutting energy consumption and energy efficiency in machining of 4140 steel International Journal of Advanced Manufacturing Technology. 74: 1701-1708. DOI: 10.1007/S00170-014-6101-3 |
0.333 |
|
2013 |
Ma J, Ge X, Lei S. Energy Efficiency in Thermally Assisted Machining of Titanium Alloy: A Numerical Study Journal of Manufacturing Science and Engineering-Transactions of the Asme. 135: 61001. DOI: 10.1115/1.4025610 |
0.343 |
|
2013 |
Ma J, Pelate N, Lei S. 3D numerical investigation of thermally assisted high efficiency ductile machining of nanocrystalline hydroxyapatite Journal of Manufacturing Processes. 15: 586-592. DOI: 10.1016/J.Jmapro.2013.06.007 |
0.322 |
|
2013 |
Ma J, Pelate N, Lei S. Thermally assisted high efficiency ductile machining of nanocrystalline hydroxyapatite: A numerical study Ceramics International. 39: 9377-9384. DOI: 10.1016/J.Ceramint.2013.05.054 |
0.373 |
|
2012 |
Ma J, Xin XJ. Elastoplastic Large Deformation Using Meshless Integral Method Wjm. 2: 339-360. DOI: 10.4236/Wjm.2012.26040 |
0.415 |
|
2008 |
Ma J, Xin XJ, Krishnaswami P. Elastoplastic meshless integral method Computer Methods in Applied Mechanics and Engineering. 197: 4774-4788. DOI: 10.1016/J.Cma.2008.06.019 |
0.661 |
|
2007 |
Ma J, Krishnaswami P, Xin XJ. A truly meshless pre- and post-processor for meshless analysis methods Advances in Engineering Software. 38: 9-30. DOI: 10.1016/J.Advengsoft.2006.07.001 |
0.647 |
|
2006 |
Bodin A, Ma J, Xin XJ, Krishnaswami P. A meshless integral method based on regularized boundary integral equation Computer Methods in Applied Mechanics and Engineering. 195: 6258-6286. DOI: 10.1016/J.Cma.2005.12.005 |
0.658 |
|
Show low-probability matches. |