| Year |
Citation |
Score |
| 2019 |
Snyder T, Braun M. A CFD-Based Frequency Response Method Applied in the Determination of Dynamic Coefficients of Hydrodynamic Bearings. Part 1: Theory Lubricants. 7: 23. DOI: 10.3390/Lubricants7030023 |
0.313 |
|
| 2019 |
Moldovan SI, Balasoiu AM, Braun M. Experimental investigation of natural convection flow in a laterally heated vertical cylindrical enclosure International Journal of Heat and Mass Transfer. 139: 205-212. DOI: 10.1016/J.Ijheatmasstransfer.2019.05.012 |
0.775 |
|
| 2018 |
Snyder T, Braun M. Comparison of Perturbed Reynolds Equation and CFD Models for the Prediction of Dynamic Coefficients of Sliding Bearings Lubricants. 6: 5. DOI: 10.3390/Lubricants6010005 |
0.362 |
|
| 2018 |
Enayati H, Braun MJ, Chandy AJ. Numerical simulations of porous medium with different permeabilities and positions in a laterally-heated cylindrical enclosure for crystal growth Journal of Crystal Growth. 483: 65-80. DOI: 10.1016/J.Jcrysgro.2017.11.019 |
0.53 |
|
| 2018 |
Enayati H, Chandy AJ, Braun MJ. Large eddy simulation (LES) calculations of natural convection in cylindrical enclosures with rack and seeds for crystal growth applications International Journal of Thermal Sciences. 123: 42-57. DOI: 10.1016/J.Ijthermalsci.2017.08.025 |
0.448 |
|
| 2017 |
Daniels CC, Braun MJ, Oravec HA, Mather JL, Taylor SC. Leak-Rate-Quantification Method for Gas Pressure Seals with Controlled Pressure Differential Journal of Spacecraft and Rockets. 54: 1228-1234. DOI: 10.2514/1.A33804 |
0.328 |
|
| 2017 |
Enayati H, Chandy AJ, Braun MJ, Horning N. 3D large eddy simulation (LES) calculations and experiments of natural convection in a laterally-heated cylindrical enclosure for crystal growth International Journal of Thermal Sciences. 116: 1-21. DOI: 10.1016/J.Ijthermalsci.2017.01.025 |
0.457 |
|
| 2016 |
Enayati H, Chandy AJ, Braun MJ. Numerical simulations of transitional and turbulent natural convection in laterally heated cylindrical enclosures for crystal growth Numerical Heat Transfer Part a-Applications. 70: 1195-1212. DOI: 10.1080/10407782.2016.1230378 |
0.395 |
|
| 2016 |
Snyder TA, Braun MJ, Pierson KC. Two-way coupled Reynolds and Rayleigh-Plesset equations for a fully transient, multiphysics cavitation model with pseudo-cavitation Tribology International. 93: 429-445. DOI: 10.1016/J.Triboint.2015.08.040 |
0.355 |
|
| 2015 |
Laukiavich CA, Braun MJ, Chandy AJ. An Investigation into the Thermal Effects on a Hydrodynamic Bearing's Clearance Tribology Transactions. 58: 980-1001. DOI: 10.1080/10402004.2015.1023408 |
0.39 |
|
| 2014 |
Laukiavich CA, Braun MJ, Chandy AJ. A comparison between the performance of ferro- and magnetorheological fluids in a hydrodynamic bearing Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 228: 649-666. DOI: 10.1177/1350650114523753 |
0.347 |
|
| 2013 |
Moldovan SI, Braun MJ, Balasoiu AM. A Three-Dimensional Parametric Study and Numerical/Experimental Flow Visualization of a Six-Pocket Hydrostatic Journal Bearing Tribology Transactions. 56: 1-26. DOI: 10.1080/10402004.2011.649512 |
0.787 |
|
| 2013 |
Balasoiu AM, Braun MJ, Moldovan SI. A parametric study of a porous self-circulating hydrodynamic bearing Tribology International. 61: 176-193. DOI: 10.1016/J.Triboint.2012.12.015 |
0.789 |
|
| 2012 |
Xing C, Braun MJ. Determination of dynamic coefficients in a hydrodynamic journal bearing based on the 3-D navier-stokes equations and considering cavitation effects American Society of Mechanical Engineers, Tribology Division, Trib. 209-211. DOI: 10.1115/IJTC2012-61192 |
0.515 |
|
| 2012 |
Horvat FE, Braun MJ. The experimental and numerical analysis of a gerolor pump using enhanced fluid film lubrication: microstructure profiling, hydrostatic pockets and surface coating Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2012. 129-131. |
0.391 |
|
| 2011 |
Horvat FE, Braun MJ. Comparative experimental and numerical analysis of flow and pressure fields inside deep and shallow pockets for a hydrostatic bearing Tribology Transactions. 54: 548-567. DOI: 10.1080/10402004.2011.575535 |
0.529 |
|
| 2010 |
Horvat FE, Braun MJ. The magnetohydrodynamic (MHD) effects on the performance of a hydrostatic thrust bearing with hybrid Raleigh step American Society of Mechanical Engineers, Tribology Division, Trib. 161-162. DOI: 10.1115/IJTC2010-41207 |
0.418 |
|
| 2010 |
Deng D, Braun MJ. Experimental verification of a new model for transition flow of thin films in long journal bearings American Society of Mechanical Engineers, Tribology Division, Trib. 157-159. DOI: 10.1115/IJTC2010-41205 |
0.34 |
|
| 2010 |
Xing C, Horvat F, Moldovan S, Braun MJ. Experimental investigation of the development of cavitation in a squeeze film damper American Society of Mechanical Engineers, Tribology Division, Trib. 137-139. DOI: 10.1115/IJTC2010-41144 |
0.317 |
|
| 2010 |
Xing C, Braun MJ, Li H. Damping and added mass coefficients for a squeeze film damper using the full 3-D Navier-Stokes equation Tribology International. 43: 654-666. DOI: 10.1016/J.Triboint.2009.10.005 |
0.634 |
|
| 2009 |
Johnston JD, Braun MJ, Kreider K, Young GW. A Parametric Analysis of a Reservoir-Extended Porous Slider Bearing with Self-Circulation and Cavitation Effects Tribology Transactions. 53: 60-74. DOI: 10.1080/10402000903226333 |
0.445 |
|
| 2009 |
Xing C, Braun MJ, Li H. A three-dimensional Navier-Stokes-based numerical model for squeeze film dampers. Part 2-effects of gaseous cavitation on the behavior of the squeeze film damper Tribology Transactions. 52: 695-705. DOI: 10.1080/10402000902913311 |
0.624 |
|
| 2009 |
Xing C, Braun MJ, Li H. A three-dimensional navier-stokes-based numerical model for squeeze-film dampers. Part 1-effects of gaseous cavitation on pressure distribution and damping coefficients without consideration of inertia Tribology Transactions. 52: 680-694. DOI: 10.1080/10402000902913303 |
0.686 |
|
| 2009 |
Xing C, Braun MJ. Imbalance response of a partially sealed squeeze film damper for the flexible rotor model Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2009. 581-583. |
0.495 |
|
| 2009 |
Horvat FE, Braun MJ. Experimental and numerical anaylsis of flow and pressure fields inside a shallow, variable depth single pocket hydrostatic bearing Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2009. 402-404. |
0.439 |
|
| 2009 |
Balasoiu AM, Braun MJ, Moldovan SI. Pressure characteristics and flow patterns for a porous self-circulating hydrodynamic brearing 2008 Proceedings of the Stle/Asme International Joint Tribology Conference, Ijtc 2008. 391-393. |
0.79 |
|
| 2009 |
Balasoiu AM, Moldovan SI, Braun MJ. Management of thermal effects for a porous self-circulating hydrodynamic bearing World Tribology Congress 2009 - Proceedings. 770. |
0.779 |
|
| 2009 |
Braun MJ, Moldovan SI, Balasoiu AM. A parametric study of the dynamics of a six-pocket hydrostatic journal bearing 2008 Proceedings of the Stle/Asme International Joint Tribology Conference, Ijtc 2008. 387-389. |
0.757 |
|
| 2008 |
Smith IM, Braun MJ. A parametric experimental investigation and performance comparison of four finger seal embodiments 2007 Proceedings of the Asme/Stle International Joint Tribology Conference, Ijtc 2007. 349-351. DOI: 10.1115/IJTC2007-44403 |
0.316 |
|
| 2008 |
Deng D, Braun MJ. An experimental and numerical investigation of flow regimes in narrow gaps 2007 Proceedings of the Asme/Stle International Joint Tribology Conference, Ijtc 2007. 327-329. DOI: 10.1115/IJTC2007-44332 |
0.421 |
|
| 2008 |
Johnston JD, Braun MJ, Young GW. Modeling a porous slider bearing with an external reservoir 2007 Proceedings of the Asme/Stle International Joint Tribology Conference, Ijtc 2007. 305-306. DOI: 10.1115/IJTC2007-44299 |
0.413 |
|
| 2008 |
Braun MJ, Li H. An integrated numerical fluid/solid interaction model for finger seals with a padded low-pressure laminate 2007 Proceedings of the Asme/Stle International Joint Tribology Conference, Ijtc 2007. 245-247. DOI: 10.1115/IJTC2007-44217 |
0.331 |
|
| 2008 |
Li H, Xing C, Braun MJ. Transport through baffles in bottom heated top cooled enclosures: Parametric studies Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 44: 1141-1151. DOI: 10.1007/S00231-007-0347-3 |
0.666 |
|
| 2007 |
Li H, Braun MJ. The lubricant flow structure and pressure generation in a journal bearing with diamond-knurled stator surface Proceedings of the Asme Turbo Expo. 5: 1005-1015. DOI: 10.1115/GT2007-28172 |
0.413 |
|
| 2007 |
Li H, Braun MJ. The sealing behavior and force analysis of a double-laminate single-padded finger seal Proceedings of the Asme Turbo Expo. 4: 1279-1290. DOI: 10.1115/GT2007-28171 |
0.325 |
|
| 2007 |
Deng D, Braun MJ. Taylor Vortices–Induced Instability (Transition Flow) versus “Turbulence” in Concentric Cylinders Separated by Microscale Clearances Tribology Transactions. 50: 573-584. DOI: 10.1080/10402000701691084 |
0.493 |
|
| 2007 |
Hannon WM, Braun MJ. Numerical Solution of a Fully Thermally Coupled Generalized Universal Reynolds Equation (GURE) and Its Application. Part 1: Conical Bearings Tribology Transactions. 50: 540-557. DOI: 10.1080/10402000701631742 |
0.427 |
|
| 2007 |
Deng D, Braun MJ. Taylor Vortices Induced Instability and Turbulence in Journal Bearing Microscale Flow Tribology Transactions. 50: 415-426. DOI: 10.1080/10402000701476882 |
0.445 |
|
| 2007 |
Li H, Braun MJ. A new heating configuration for hydrothermal crystal growth vessels to achieve better thermal and flow environments Journal of Crystal Growth. 299: 109-119. DOI: 10.1016/J.Jcrysgro.2006.10.257 |
0.61 |
|
| 2007 |
Li H, Xing C, Braun MJ. Flows in a lower half heated upper half cooled cylindrical model reactor loaded with porous media Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 43: 1201-1211. DOI: 10.1007/S00231-006-0189-4 |
0.725 |
|
| 2007 |
Li H, Xing C, Braun MJ. Natural convection in a bottom-heated top-cooled cubic cavity with a baffle at the median height: Experiment and model validation Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 43: 895-905. DOI: 10.1007/S00231-006-0178-7 |
0.735 |
|
| 2006 |
Li H, Braun MJ. Three-dimensional heat transfer and fluid exchange through single-hole baffles in industry hydrothermal autoclaves Journal of Crystal Growth. 289: 596-604. DOI: 10.1016/J.Jcrysgro.2005.11.122 |
0.606 |
|
| 2006 |
Li H, Braun MJ, Xing C. Fluid flow and heat transfer in a cylindrical model hydrothermal reactor Journal of Crystal Growth. 289: 207-216. DOI: 10.1016/J.Jcrysgro.2005.10.113 |
0.733 |
|
| 2006 |
Li H, Braun MJ, Paudel G. Flow structure and heat transfer in a lower half heated and upper half cooled rectangular enclosure International Journal of Heat and Mass Transfer. 49: 3462-3476. DOI: 10.1016/J.Ijheatmasstransfer.2006.02.054 |
0.615 |
|
| 2006 |
Li H, Braun MJ. Flow structure and wall layer control in a lower half heated upper half cooled enclosure with superimposed temperature deviations Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 42: 1049-1061. DOI: 10.1007/S00231-005-0060-Z |
0.602 |
|
| 2006 |
Li H, Braun MJ. Flow structure and transport mechanism in lower half heated upper half cooled enclosures in laminar flow regime Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 42: 823-834. DOI: 10.1007/S00231-005-0037-Y |
0.602 |
|
| 2006 |
Braun MJ, Li H. Numerical simulation of finger seal compliance through an integrated fluid-solid model Proceedings of the 11th International Symposium On Transport Phenomena and Dynamics of Rotating Machinery, Isromac-11. 1: 255-266. |
0.382 |
|
| 2005 |
Li H, Braun MJ. Numerical investigation on multi-hole baffle designs for industry hydrothermal synthesis of single crystals Modelling and Simulation in Materials Science and Engineering. 13: 1249-1266. DOI: 10.1088/0965-0393/13/8/004 |
0.592 |
|
| 2005 |
Daniels CC, Braun MJ. The friction behavior of individual components of a spark-ignition engine during warm-up Stle Annual Meeting Preprints. 60. DOI: 10.1080/05698190500544403 |
0.335 |
|
| 2005 |
Braun MJ, Pierson HM, Deng D. Thermofluids considerations and the dynamic behavior of a finger seal assembly Tribology Transactions. 48: 531-547. DOI: 10.1080/05698190500385104 |
0.5 |
|
| 2005 |
Li H, Braun MJ, Evans EA, Wang GX, Paudel G, Miller J. Natural convection flow structures and heat transfer in a model hydrothermal growth reactor International Journal of Heat and Fluid Flow. 26: 45-55. DOI: 10.1016/J.Ijheatfluidflow.2004.06.005 |
0.644 |
|
| 2005 |
Braun MJ, Pierson HM, Li H. Some numerical simulations and an experimental investigation of a finger seal Proceedings of the World Tribology Congress Iii - 2005. 937-938. |
0.34 |
|
| 2004 |
Li H, Braun MJ, Evans EA, Wang G-. Steady Laminar Flows in Lower Half Heated Upper Half Cooled Rectangular and Cylindrical Enclosures: Comparison of the Transport Mechanism Volume!. 859-868. DOI: 10.1115/Ht-Fed2004-56775 |
0.631 |
|
| 2004 |
Li H, Braun MJ, Evans EA, Wang G-. Transport Through Single-Hole Baffles in Industry Hydrothermal Autoclaves With Three-Dimensional Flows Volume!. 1099-1106. DOI: 10.1115/Ht-Fed2004-56774 |
0.612 |
|
| 2004 |
Liu S, Li H, Braun MJ. Experimental study on skin friction reduction with micro-blowing Proceedings of the Asme Heat Transfer/Fluids Engineering Summer Conference 2004, Ht/Fed 2004. 4: 333-337. DOI: 10.1115/Ht-Fed2004-56218 |
0.612 |
|
| 2004 |
Zhao H, Choy FK, Braun MJ. Transient and steady state vibration analysis of a wavy thrust bearing Proceedings of the Asme/Stle International Joint Tribology Conference, Ijtc 2004. 581-587. DOI: 10.1115/1.2033900 |
0.339 |
|
| 2004 |
Lattime SB, Braun MJ, Choy FK. Design considerations towards the construction of hybrid floating brush seal (HFBS) Tribology International. 37: 159-167. DOI: 10.1016/S0301-679X(03)00045-8 |
0.77 |
|
| 2003 |
Braun MJ, Kudriavtsev VV, Steinetz BM, Proctor MP. Two- and Three-Dimensional Numerical Experiments Representing Two Limiting Cases of an In-Line Pair of Finger Seal Components International Journal of Rotating Machinery. 9: 171-179. DOI: 10.1155/S1023621X03000162 |
0.483 |
|
| 2003 |
Braun MJ, Pierson HM, Kudriavtsev VV. Finger seal solid modeling design and some solid/fluid interaction considerations Tribology Transactions. 46: 566-575. DOI: 10.1080/10402000308982665 |
0.454 |
|
| 2002 |
Lattime SB, Braun MJ, Choy FK, Hendricks RC, Steinetz BM. Rotating brush seal International Journal of Rotating Machinery. 8: 153-160. DOI: 10.1155/S1023621X02000143 |
0.769 |
|
| 2002 |
Braun MJ, Kudriavtsev V, Corder RK. Flow visualization of the evolution of Taylor instabilities and comparison with numerical simulations American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 448: 45-54. DOI: 10.1115/PVP2002-1535 |
0.396 |
|
| 2002 |
Zhao H, Choy FK, Braun MJ. Modeling and analysis of a wavy thrust bearing Tribology Transactions. 45: 85-93. DOI: 10.1080/10402000208982525 |
0.4 |
|
| 2001 |
Braun MJ, Daniels CC, Peloso DP, Hendricks RC. Experimental Flow Patterns and Pressure Characteristics in a Single Hydrostatic Pocket of Variable Depth Journal of Flow Visualization and Image Processing. 8: 14-14. DOI: 10.1615/Jflowvisimageproc.V8.I1.10 |
0.476 |
|
| 2000 |
Braun MJ, Daniels CC, Dyko MP. An experimental investigation of natural convection in an open-ended horizontal annulus using a nonintrusive full flow field visualization method Journal of Flow Visualization and Image Processing. 7: 325-342. DOI: 10.1615/Jflowvisimageproc.V7.I4.40 |
0.497 |
|
| 1997 |
Braun MJ, Dzodzo MB. Three-dimensional flow and pressure patterns in a hydrostatic journal bearing pocket Journal of Tribology. 119: 711-719. |
0.453 |
|
| 1997 |
Braun MJ, Daniels CC, Dyko MP, Krga V. Temperature distribution and flow characteristics of a concentric horizontal cylinder configuration American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 13. |
0.386 |
|
| 1996 |
Kudriavtsev VV, Braun MJ. Model developments for the brush seal numerical simulation Journal of Propulsion and Power. 12: 193-201. DOI: 10.2514/3.24010 |
0.408 |
|
| 1996 |
Braun MJ, Choy FK, Dzodzo M, Hsu J. Steady-state and transient dynamic simulation of a continuous foil bearing© Tribology Transactions. 39: 322-329. DOI: 10.1080/10402009608983534 |
0.427 |
|
| 1996 |
Dzodzo M, Braun MJ, Hendricks RC. Pressure and flow characteristics in a shallow hydrostatic pocket with rounded pocket/land joints Tribology International. 29: 69-76. DOI: 10.1016/0301-679X(95)00036-4 |
0.516 |
|
| 1996 |
Braun MJ, Choy FK, Dzodzo M, Hsu J. Two-dimensional dynamic simulation of a continuous foil bearing Nasa Conference Publication. 267-279. DOI: 10.1016/0301-679X(95)00035-3 |
0.372 |
|
| 1996 |
Braun MJ, Dzodzo MB. A three dimensional model for a hydrostatic journal bearing pocket with an inclined restrictor 32nd Joint Propulsion Conference and Exhibit. |
0.434 |
|
| 1996 |
Braun MJ, Dzodzo MB. Three dimensional flow and pressure patterns in a hydrostatic journal bearing Nasa Conference Publication. 281-284. |
0.416 |
|
| 1996 |
Dzodzo MB, Braun MJ. A three dimensional model for a hydrostatic bearing 32nd Joint Propulsion Conference and Exhibit. 1-6. |
0.427 |
|
| 1996 |
Braun MJ, Dzodzo MB. Three-dimensional flow and pressure patterns in a single pocket of a hydrostatic journal bearing Nasa Conference Publication. 285-297. |
0.447 |
|
| 1996 |
Braun MJ, Dzodzo MB, Lattime SB. Some qualitative and quantitative aspects of flow in a hydrostatic journal bearing pocket American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 239: 109-113. |
0.823 |
|
| 1995 |
Braun MJ, Dzodzo M. Effects of Hydrostatic Pocket Shape on the Flow Pattern and Pressure Distribution International Journal of Rotating Machinery. 1: 225-235. DOI: 10.1155/S1023621X95000091 |
0.449 |
|
| 1995 |
Hendricks RC, Steinetz BM, Athavale MM, Przekwas AJ, Braun MJ, Dozozo MI, Choy FK, Kudriavtsev VV, Mullen RL, Von Pragenau GL. Interactive Development of Seals, Bearings, and Secondary Flow Systems with the Power Stream International Journal of Rotating Machinery. 1: 153-185. DOI: 10.1155/S1023621X95000054 |
0.343 |
|
| 1995 |
Kudriavtsev VV, Braun MJ. Interstage disk-cavity/brush seal numerical flow visualization study American Society of Mechanical Engineers (Paper). DOI: 10.1115/95-GT-378 |
0.406 |
|
| 1995 |
Braun MJ, Dzodzo M. Closure to “Discussion of ‘Effects of the Feedline and the Hydrostatic Pocket Depth on the Flow Pattern and Pressure Distribution’” (1995, ASME J. Tribol., 117, p. 232) Journal of Tribology-Transactions of the Asme. 117: 232-233. DOI: 10.1115/1.2831235 |
0.456 |
|
| 1995 |
Braun MJ, Choy FK, Zhu N. Flow patterns and dynamic characteristics of a lightly loaded hydrostatic pocket of variable aspect ratio and supply jet strength Tribology Transactions. 38: 128-136. DOI: 10.1080/10402009508983388 |
0.503 |
|
| 1995 |
Dzodzo M, Braun MJ. Numerical 3-D flow visualization in a shallow driven cavity with a penetrating jet at its bottom American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 218: 115-121. |
0.404 |
|
| 1995 |
Braun MJ, Kudriavtsev VV. Numerical simulation of a brush seal section and some experimental results Journal of Turbomachinery. 117: 190-202. |
0.372 |
|
| 1995 |
Braun MJ, Kudriavtsev VV. Fluid flow structures in staggered banks of cylinders located in a channel Journal of Fluids Engineering, Transactions of the Asme. 117: 36-44. |
0.38 |
|
| 1995 |
Lattime SB, Braun MJ, Dzodzo M. Simultaneous visualization of flow and temperature patterns in a shell and tube heat exchanger by TLC American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 218: 7-14. |
0.797 |
|
| 1994 |
Braun MJ, Shou YM, Choy FK. Transient flow patterns and pressures characteristics in a hydrostatic pocket Journal of Tribology. 116: 139-146. DOI: 10.1115/1.2927030 |
0.489 |
|
| 1994 |
Braun MJ, Dzodzo M. Effects of the feedline and the hydrostatic pocket depth on the flow pattern and pressure distribution American Society of Mechanical Engineers (Paper). 1-9. |
0.465 |
|
| 1993 |
Braun MJ, Canacci VA, Russell LM. A Laser-Based, Computer-Aided, Nonintrusive Technique For Qualitative And Quantitative Flow Characterization In Cowl-Lip Configurations Of Variable Geometry Journal of Flow Visualization and Image Processing. 1: 189-209. DOI: 10.1615/Jflowvisimageproc.V1.I3.40 |
0.341 |
|
| 1993 |
Braun MJ, Choy FK, Zhou YM. Effects of a hydrostatic pocket aspect ratio, supply orifice position, and attack angle on steady-state flow patterns, pressure, and shear characteristics Journal of Tribology. 115: 678-685. DOI: 10.1115/1.2921693 |
0.407 |
|
| 1993 |
Choy FK, Braun MJ, Hu Y. Nonlinear study of a misaligned hydrodynamic journal bearing Tribology Transactions. 36: 421-430. DOI: 10.1080/10402009308983180 |
0.452 |
|
| 1993 |
Braun MJ, Kudriavtsev VV. Numerical visualization of flow structures in dense banks of cylinders located in a channel American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 172: 253-260. |
0.373 |
|
| 1993 |
Kudriavtev VV, Braun MJ. Reynolds number parametric numerical investigation of flow structures and pressure distribution in a system of cylinder arrays American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 149: 83-93. |
0.443 |
|
| 1993 |
Braun MJ, Dzodzo M, Lattime SB. Automatic computer based non-intrusive temperature measurements in laminar natural convection using TLC in enclosures with variable aspect ratio American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 172: 111-119. |
0.77 |
|
| 1992 |
Braun MJ, Canacci VA, Hendricks RC. Flow visualization and motion analysis for a series of four sequential brush seals Journal of Propulsion and Power. 8: 697-702. DOI: 10.2514/3.23534 |
0.513 |
|
| 1992 |
Choy FK, Braun MJ, Hu Y. Analytical and numerical study of a misaligned cavitating hydrodynamic cryogenic journal bearing Tribology International. 25: 3-15. DOI: 10.1016/0301-679X(92)90116-5 |
0.47 |
|
| 1992 |
Braun MJ, Canacci VA, Russell LM. Full field flow visualization and computer-aided velocity measurements in a bank of cylinders in a wind tunnel Experiments in Fluids. 13: 117-127. DOI: 10.1007/Bf00218157 |
0.423 |
|
| 1991 |
Hendricks RC, Braun MJ, Canacci V, Mullen RL. Paper IX (i) Brush Seals in Vehicle Tribology Tribology Series. 18: 231-242. DOI: 10.1016/S0167-8922(08)70138-X |
0.436 |
|
| 1991 |
Braun MJ, Hendricks RC. Non-intrusive laser-based, full-field quantitative flow measurements aided by digital image processing. Part 1: Eccentric cylinders Tribology International. 24: 195-205. DOI: 10.1016/0301-679X(91)90044-A |
0.453 |
|
| 1991 |
Braun MJ, Batur C. Non-intrusive laser-based, full-field quantitative flow measurements aided by digital image processing. Part 2: The hydrostatic journal bearing Tribology International. 24: 277-289. DOI: 10.1016/0301-679X(91)90030-D |
0.401 |
|
| 1991 |
Braun MJ, Dong QJ. Numerical visualization of flow in a shear driven cavity with an incoming jet American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 128: 335-342. |
0.317 |
|
| 1990 |
Braun MJ, Hendricks RC, Canacci V. Flow visualization in a simulated brush seal American Society of Mechanical Engineers (Paper). |
0.401 |
|
| 1989 |
Keska JK, Braun MJ. Some experimental results of a transient and oscillatory flow pattern in gas-solid flow . |
0.332 |
|
| 1988 |
Braun MJ, Dougherty JD. Hydrodynamic analysis and fluid-solid interaction effects on the behaviour of a compliant wall (thick) journal bearing. Part 1: theory. . DOI: 10.1115/1.3261881 |
0.323 |
|
| 1988 |
Batur C, Braun MJ. Expert system to identify the steady state performance characteristics of journal bearings through non-intrusive image processing techniques Proceedings of the American Control Conference. 88: 632-636. |
0.307 |
|
| 1988 |
Braun MJ, Batur C, Karavelakis G. Non-intrusive flow measurements in hydrostatic journal bearings Advances in Instrumentation, Proceedings. 43: 277-288. |
0.356 |
|
| 1987 |
Braun MJ, Hendricks RC, Wheeler RL. Thermal shaft effects on load-carrying capacity of a fully coupled, variable-properties cryogenic journal bearing Asle Transactions. 30: 282-292. DOI: 10.1080/05698198708981759 |
0.455 |
|
| 1986 |
Hendricks RC, Mullen RL, Braun MJ. REFRIGERATED DYNAMIC SEAL TO 6. 9 MPa (1000 psi) Advances in Cryogenic Engineering. 31: 1007-1016. DOI: 10.1007/978-1-4613-2213-9_113 |
0.493 |
|
| 1986 |
Braun MJ, Wheeler RL, Hendricks RC. FULLY COUPLED VARIABLE PROPERTIES THERMOHYDRAULIC MODEL FOR A CRYOGENIC HYDROSTATIC JOURNAL BEARING American Society of Mechanical Engineers (Paper). |
0.348 |
|
| 1984 |
Braun MJ, Mullen RL. An analysis of temperature effect in a finite journal bearing with spatial tilt and viscous dissipation Asle Transactions. 27: 405-412. DOI: 10.1080/05698198408981587 |
0.459 |
|
| 1984 |
Braun MJ, Hendricks RC. An experimental investigation of the vaporous/gaseous cavity characteristics of an eccentric journal bearing Asle Transactions. 27: 1-14. DOI: 10.1080/05698198408981539 |
0.314 |
|
| 1984 |
Braun MJ, Adams ML, Mullen RL. ANALYSIS OF A TWO ROW HYDROSTATIC JOURNAL BEARING WITH VARIABLE PROPERTIES INERTIA EFFECTS AND SURFACE ROUGHNESS Israel Journal of Technology. 22: 155-164. |
0.366 |
|
| 1982 |
Braun MJ, Hendricks RC. An experimental investigation of the vaporous/gaseous cavity characteristics of an eccentric journal bearing . |
0.325 |
|
| 1982 |
Braun MJ, Hendricks RC. EXPERIMENTAL INVESTIGATION OF THE VAPOROUS/GASEOUS CAVITY CHARACTERISTICS OF AN ECCENTRIC JOURNAL BEARING Nasa Technical Memorandum. |
0.312 |
|
| 1982 |
Braun MJ, Hendricks RC. EXPERIMENTAL INVESTIGATION OF THE VAPOROUS/GASEOUS CAVITY CHARACTERISTICS OF AN ECCENTRIC JOURNAL BEARING Nasa Technical Memorandum. |
0.312 |
|
| Show low-probability matches. |