| Year |
Citation |
Score |
| 2020 |
Sun Q, Han Q, Wang S, Xu R. Microstructure, corrosion behaviour and thermal stability of AA 7150 after ultrasonic shot peening Surface & Coatings Technology. 398: 126127. DOI: 10.1016/J.Surfcoat.2020.126127 |
0.378 |
|
| 2020 |
Zhang J, Peng P, She J, Jiang B, Tang A, Pan F, Han Q. A study of the corrosion behavior of AZ31 Mg alloy in depth direction after surface nanocrystallization Surface & Coatings Technology. 396: 125968. DOI: 10.1016/J.Surfcoat.2020.125968 |
0.405 |
|
| 2020 |
Sun Q, Han Q. Surface segregation phenomenon of surface severe plastic deformed Al–Zn–Mg–Cu alloys Materialia. 11: 100741. DOI: 10.1016/J.Mtla.2020.100741 |
0.387 |
|
| 2020 |
Bagherzadeh S, Abrinia K, Han Q. Analysis of plastic deformation behavior of ultrafine-grained aluminum processed by the newly developed ultrasonic vibration enhanced ECAP: Simulation and experiments Journal of Manufacturing Processes. 50: 485-497. DOI: 10.1016/J.Jmapro.2020.01.010 |
0.381 |
|
| 2020 |
Zhang J, Jiang B, Yang Q, Huang D, Tang A, Pan F, Han Q. Role of second phases on the corrosion resistance of Mg-Nd-Zr alloys Journal of Alloys and Compounds. 849: 156619. DOI: 10.1016/J.Jallcom.2020.156619 |
0.371 |
|
| 2020 |
Han Q, Vian C, Good J. Application of Refractory Metals to Facilitate Hot Chamber Aluminum Die Casting International Journal of Metalcasting. 1-6. DOI: 10.1007/S40962-020-00482-7 |
0.406 |
|
| 2020 |
Han Q, Zhang J. Fluidity of Alloys Under High-Pressure Die Casting Conditions: Flow-Choking Mechanisms Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 51: 1795-1804. DOI: 10.1007/S11663-020-01858-0 |
0.346 |
|
| 2020 |
Zhao X, Meng D, Zhang J, Han Q. The effect of heat treatment on die casting aluminum to apply self-pierce riveting The International Journal of Advanced Manufacturing Technology. 109: 2409-2419. DOI: 10.1007/S00170-020-05833-6 |
0.319 |
|
| 2019 |
Meng D, Zhao X, Zhao S, Han Q. Effects of vibration direction on the mechanical behavior and microstructure of a metal sheet undergoing vibration-assisted uniaxial tension Materials Science and Engineering: A. 743: 472-481. DOI: 10.1016/J.Msea.2018.11.115 |
0.34 |
|
| 2019 |
Sun Q, Xu R, Han Q, Zhao K, McAdams I, Xu W. Long distance chemical gradient induced by surface nanocrystallization Applied Materials Today. 14: 137-142. DOI: 10.1016/J.Apmt.2018.12.002 |
0.426 |
|
| 2019 |
Sui D, Han Q. Effects of Different Parameters on Porosity Defects Between the Horizontal and Vertical Shot Sleeve Processes International Journal of Metalcasting. 13: 417-425. DOI: 10.1007/S40962-018-0267-7 |
0.344 |
|
| 2019 |
Chen J, Ma F, Liu P, Wang C, Liu X, Li W, Han Q. Effects of Nb on Superelasticity and Low Modulus Properties of Metastable β-Type Ti-Nb-Ta-Zr Biomedical Alloys Journal of Materials Engineering and Performance. 28: 1410-1418. DOI: 10.1007/S11665-019-03897-4 |
0.385 |
|
| 2018 |
Yin F, Xu R, Hu S, Zhao K, Yang S, Kuang S, Li Q, Han Q. Enhanced Mechanical and Biological Performance of an Extremely Fine Nanograined 316L Stainless Steel Cell-Substrate Interface Fabricated by Ultrasonic Shot Peening. Acs Biomaterials Science & Engineering. 4: 1609-1621. PMID 33445318 DOI: 10.1021/Acsbiomaterials.8B00173 |
0.325 |
|
| 2018 |
Han H, Wang S, Rakita M, Wang Y, Han Q, Xu Q. Effect of Ultrasound-Assisted Extraction of Phenolic Compounds on the Characteristics of Walnut Shells Food and Nutrition Sciences. 9: 1034-1045. DOI: 10.4236/fns.2018.98076 |
0.674 |
|
| 2018 |
Wang C, Ma F, Liu P, Chen J, Liu X, Zhang K, Li W, Han Q. The influence of alloy elements in Ti 6Al 4V and Ti 35Nb 2Ta 3Zr on the structure, morphology and properties of MAO coatings Vacuum. 157: 229-236. DOI: 10.1016/J.Vacuum.2018.08.054 |
0.395 |
|
| 2018 |
Sun Q, Liu X, Han Q, Li J, Xu R, Zhao K. A comparison of AA2024 and AA7150 subjected to ultrasonic shot peening: Microstructure, surface segregation and corrosion Surface and Coatings Technology. 337: 552-560. DOI: 10.1016/J.Surfcoat.2018.01.072 |
0.409 |
|
| 2018 |
Yin F, Cheng GJ, Xu R, Zhao K, Li Q, Jian J, Hu S, Sun S, An L, Han Q. Ultrastrong nanocrystalline stainless steel and its Hall-Petch relationship in the nanoscale Scripta Materialia. 155: 26-31. DOI: 10.1016/J.Scriptamat.2018.06.014 |
0.328 |
|
| 2018 |
Liu Z, Cheng N, Zheng Q, Wu J, Han Q, Huang Z, Xing J, Li Y, Gao Y. Processing and tensile properties of A356 composites containing in situ small-sized Al 3 Ti particulates Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 710: 392-399. DOI: 10.1016/J.Msea.2017.11.005 |
0.378 |
|
| 2018 |
Sun S, Yin F, Liu Y, Zhang W, Zhao A, Han Q. Deformation-induced dissolution of copper precipitation in 1.5wt%Cu-bearing antibacterial Fe-17wt%Cr alloy during plastic deformation process Materials & Design. 157: 469-477. DOI: 10.1016/J.Matdes.2018.08.014 |
0.352 |
|
| 2018 |
Yin F, Liu Y, Xu R, Zhao K, Partin A, Han Q. Nanograined surface fabricated on the pure copper by ultrasonic shot peening and an energy-density based criterion for peening intensity quantification Journal of Manufacturing Processes. 32: 656-663. DOI: 10.1016/J.Jmapro.2018.04.003 |
0.355 |
|
| 2018 |
Liu J, Liu Z, Dong Z, Cheng X, Zheng Q, Li J, Zuo S, Huang Z, Gao Y, Xing J, Han Q. On the preparation and mechanical properties of in situ small-sized TiB2/Al-4.5Cu composites via ultrasound assisted RD method Journal of Alloys and Compounds. 765: 1008-1017. DOI: 10.1016/J.Jallcom.2018.06.303 |
0.406 |
|
| 2018 |
Ma F, Wang C, Liu P, Li W, Liu X, Chen X, Zhang K, Han Q. Microstructure and mechanical properties of Ti matrix composite reinforced with 5 vol.% TiC after various thermo-mechanical treatments Journal of Alloys and Compounds. 758: 78-84. DOI: 10.1016/J.Jallcom.2018.05.134 |
0.368 |
|
| 2018 |
Yang C, Liu Z, Zheng Q, Cao Y, Dai X, Sun L, Zhao J, Xing J, Han Q. Ultrasound assisted in-situ casting technique for synthesizing small-sized blocky Al3Ti particles reinforced A356 matrix composites with improved mechanical properties Journal of Alloys and Compounds. 747: 580-590. DOI: 10.1016/J.Jallcom.2018.02.010 |
0.408 |
|
| 2018 |
Sun Q, Han Q, Xu R, Zhao K, Li J. Localized corrosion behaviour of AA7150 after ultrasonic shot peening: Corrosion depth vs. impact energy Corrosion Science. 130: 218-230. DOI: 10.1016/J.Corsci.2017.11.008 |
0.375 |
|
| 2018 |
Liu Z, Dong Z, Cheng X, Zheng Q, Zhao J, Han Q. On the Supplementation of Magnesium and Usage of Ultrasound Stirring for Fabricating In Situ TiB2/A356 Composites with Improved Mechanical Properties Metallurgical and Materials Transactions A. 49: 5585-5598. DOI: 10.1007/S11661-018-4883-X |
0.399 |
|
| 2017 |
Meng D, Zhao X, Li J, Zhao S, Han Q. Mechanical behavior and microstructure of low-carbon steel undergoing low-frequency vibration-assisted tensile deformation Journal of Materials Research. 32: 3885-3893. DOI: 10.1557/Jmr.2017.359 |
0.312 |
|
| 2017 |
Yin F, Rakita M, Hu S, Han Q. Overview of ultrasonic shot peening Surface Engineering. 33: 651-666. DOI: 10.1080/02670844.2017.1278838 |
0.756 |
|
| 2017 |
Sun Q, Han Q, Liu X, Xu W, Li J. The effect of surface contamination on corrosion performance of ultrasonic shot peened 7150 Al alloy Surface & Coatings Technology. 328: 469-479. DOI: 10.1016/J.Surfcoat.2017.08.028 |
0.382 |
|
| 2017 |
Liu X, Liu Y, Huang D, Han Q, Wang X. Tailoring in-situ TiB2 particulates in aluminum matrix composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 705: 55-61. DOI: 10.1016/J.Msea.2017.08.047 |
0.405 |
|
| 2017 |
Yin F, Rakita M, Hu S, Sertse HM, Han Q. In-situ method to produce nanograined metallic powders/flakes via ultrasonic shot peening Journal of Manufacturing Processes. 26: 393-398. DOI: 10.1016/J.Jmapro.2017.03.008 |
0.742 |
|
| 2017 |
Yang C, Zhang B, Zhao D, Li X, Zhai T, Han Q, Liu F. In-situ synthesis of AlN/Mg-Al composites with high strength and high plasticity Journal of Alloys and Compounds. 699: 627-632. DOI: 10.1016/J.Jallcom.2017.01.005 |
0.389 |
|
| 2017 |
Wang M, Xu W, Han Q. The Influence of Sr Addition on the Microstructure of A380 Alloy International Journal of Metalcasting. 11: 321-327. DOI: 10.1007/S40962-016-0071-1 |
0.366 |
|
| 2017 |
Rakita M, Han Q. Influence of Pressure Field in Melts on the Primary Nucleation in Solidification Processing Metallurgical and Materials Transactions B. 48: 2232-2244. DOI: 10.1007/S11663-017-1029-2 |
0.726 |
|
| 2016 |
Cui Y, Xu W, Du M, Han Q. Corrosion performance of 5182 aluminium alloy in calcium chloride solution International Journal of Computational Materials Science and Surface Engineering. 6: 197. DOI: 10.1504/Ijcmsse.2016.10002557 |
0.337 |
|
| 2016 |
Han Q, Setchi R, Evans SL. Synthesis and characterisation of advanced ball-milled Al-Al2O3 nanocomposites for selective laser melting Powder Technology. 297: 183-192. DOI: 10.1016/j.powtec.2016.04.015 |
0.301 |
|
| 2016 |
Bagherzadeh S, Abrinia K, Han Q. Ultrasonic assisted equal channel angular extrusion (UAE) as a novel hybrid method for continuous production of ultra-fine grained metals Materials Letters. 169: 90-94. DOI: 10.1016/J.Matlet.2016.01.095 |
0.398 |
|
| 2016 |
Liu Z, Han Q, Huang Z, Xing J, Gao Y. Sonochemical combustion synthesis of purer Ti2AlC from Ti-Al-C system Chemical Engineering Journal. 288: 532-538. DOI: 10.1016/J.Cej.2015.12.050 |
0.359 |
|
| 2016 |
Wang M, Xu W, Han Q. Effect of Heat Treatment on Controlling the Morphology of AlFeSi Phase in A380 Alloy International Journal of Metalcasting. 10: 516-523. DOI: 10.1007/S40962-016-0068-9 |
0.346 |
|
| 2016 |
Sui D, Cui Z, Wang R, Hao S, Han Q. Effect of cooling process on porosity in the aluminum alloy automotive wheel during low-pressure die casting International Journal of Metalcasting. 10: 32-42. DOI: 10.1007/S40962-015-0008-0 |
0.401 |
|
| 2016 |
Zhong H, Chen X, Han Q, Han K, Zhai Q. A Thermal Simulation Method for Solidification Process of Steel Slab in Continuous Casting Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47: 2963-2970. DOI: 10.1007/S11663-016-0660-7 |
0.344 |
|
| 2016 |
Han Q. A Modified Cast-on Method for the Reinforcement of Aluminum Castings with Dissimilar Metals Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 1-8. DOI: 10.1007/S11663-016-0612-2 |
0.346 |
|
| 2016 |
Wang X, Song J, Vian W, Ma H, Han Q. The Interface of TiB2 and Al3Ti in Molten Aluminum Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 47: 3285-3290. DOI: 10.1007/S11663-015-0570-0 |
0.304 |
|
| 2016 |
Song J, Wang X, DenOuden T, Han Q. Evolution of Intermetallic Phases in Soldering of the Die Casting of Aluminum Alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 2609-2615. DOI: 10.1007/S11661-016-3454-2 |
0.347 |
|
| 2016 |
Bagherzadeh S, Abrinia K, Liu Y, Han Q. The effect of combining high-intensity ultrasonic vibration with ECAE process on the process parameters and mechanical properties and microstructure of aluminum 1050 International Journal of Advanced Manufacturing Technology. 1-12. DOI: 10.1007/S00170-016-8779-X |
0.397 |
|
| 2016 |
Powell M, Manchiraju K, Han Q. Ultrasonic Grain Refining of Continuous Cast Aluminum: Microstructure and Properties Light Metals. 737-740. DOI: 10.1007/978-3-319-48251-4_124 |
0.381 |
|
| 2015 |
Liu Z, Rakita M, Xu W, Wang X, Han Q. Ultrasound assisted combustion synthesis of TiC in Al-Ti-C system. Ultrasonics Sonochemistry. 27: 631-7. PMID 25937509 DOI: 10.1016/J.Ultsonch.2015.04.025 |
0.757 |
|
| 2015 |
Yin F, Han Q, Rakita M, Wang M, Hua L, Wang C. Numerical modelling and experimental approach for shot velocity evaluation during ultrasonic shot peening International Journal of Computational Materials Science and Surface Engineering. 6: 97-110. DOI: 10.1504/IJCMSSE.2015.071646 |
0.724 |
|
| 2015 |
Wang X, Han Q. Relationships of diboride phases in Al–Ti(Zr)–B alloys Materials Science and Technology. 31: 874-879. DOI: 10.1179/1743284714Y.0000000670 |
0.443 |
|
| 2015 |
Liu Z, Rakita M, Xu W, Wang X, Han Q. Ultrasound assisted salts-metal reaction for synthesizing TiB2 particles at low temperature Chemical Engineering Journal. 263: 317-324. DOI: 10.1016/J.Cej.2014.11.043 |
0.746 |
|
| 2015 |
Zhang Y, Miao X, Shen Z, Han Q, Song C, Zhai Q. Macro segregation formation mechanism of the primary silicon phase in directionally solidified Al-Si hypereutectic alloys under the impact of electric currents Acta Materialia. 97: 357-366. DOI: 10.1016/J.Actamat.2015.07.002 |
0.333 |
|
| 2015 |
Han Q. Ultrasonic Processing of Materials Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 46: 1603-1614. DOI: 10.1007/S11663-014-0266-X |
0.453 |
|
| 2015 |
Liu Z, Han Q, Huang Z, Xing J. A Quantitative Study of the Synthesis of TiB2 Particles via Salts-Metal Reaction at Different Temperatures Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 1-11. DOI: 10.1007/S11661-015-3268-7 |
0.34 |
|
| 2015 |
Yin F, Hu S, Hua L, Wang X, Suslov S, Han Q. Surface Nanocrystallization and Numerical Modeling of Low Carbon Steel by Means of Ultrasonic Shot Peening Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 46: 1253-1261. DOI: 10.1007/S11661-014-2689-Z |
0.344 |
|
| 2014 |
Liu Z, Wang X, Han Q, Li J. Synthesis of submicrometer-sized TiC particles in aluminum melt at low melting temperature Journal of Materials Research. 29: 896-901. DOI: 10.1557/Jmr.2014.56 |
0.351 |
|
| 2014 |
Liu Z, Rakita M, Wang X, Xu W, Han Q. In situ formed Al3 Ti particles in Al alloy matrix and their effects on the microstructure and mechanical properties of 7075 alloy Journal of Materials Research. 29: 1354-1361. DOI: 10.1557/Jmr.2014.123 |
0.773 |
|
| 2014 |
Song C, Li K, Xie K, Lu W, Zhao S, Han Q, Zhai Q. The effect of the nucleation ability on solidified microstructures of gas-atomized Fe–6.5 wt.%Si alloy powder Powder Technology. 263: 31-36. DOI: 10.1016/J.Powtec.2014.04.074 |
0.39 |
|
| 2014 |
Liu Z, Wang X, Han Q, Li J. Effects of the addition of Ti powders on the microstructure and mechanical properties of A356 alloy Powder Technology. 253: 751-756. DOI: 10.1016/J.Powtec.2013.12.052 |
0.433 |
|
| 2014 |
Wang X, Jiang L, Luo A, Song J, Liu Z, Yin F, Han Q, Yue S, Jonas JJ. Deformation of twins in a magnesium alloy under tension at room temperature Journal of Alloys and Compounds. 594: 44-47. DOI: 10.1016/J.Jallcom.2014.01.100 |
0.356 |
|
| 2014 |
Yin F, Hua L, Wang X, Rakita M, Han Q. Numerical modelling and experimental approach for surface morphology evaluation during ultrasonic shot peening Computational Materials Science. 92: 28-35. DOI: 10.1016/J.Commatsci.2014.05.011 |
0.733 |
|
| 2014 |
Wang X, Liu Z, Dai W, Han Q. On the Understanding of Aluminum Grain Refinement by Al-Ti-B Type Master Alloys Metallurgical and Materials Transactions B. 46: 1620-1625. DOI: 10.1007/S11663-014-0252-3 |
0.439 |
|
| 2014 |
Dai W, Wang X, Zhao W, Han Q. A Comparison of the Effects of Al-Ti-B Type Grain Refiners from Different Makers on Pure Aluminum Light Metals. 945-949. DOI: 10.1007/978-3-319-48144-9_157 |
0.388 |
|
| 2013 |
Liu Y, Han Q, Hua L, Xu C. Numerical and experimental investigation of upsetting with ultrasonic vibration of pure copper cone tip. Ultrasonics. 53: 803-7. PMID 23237201 DOI: 10.1016/J.Ultras.2012.11.010 |
0.328 |
|
| 2013 |
Rakita M, Wang M, Han Q, Liu Y, Yin F. Ultrasonic shot peening International Journal of Computational Materials Science and Surface Engineering. 5: 189. DOI: 10.1504/Ijcmsse.2013.056948 |
0.743 |
|
| 2013 |
Liu Z, Han Q, Li J. Fabrication of in situ Al3Ti/Al composites by using ultrasound assisted direct reaction between solid Ti powders and liquid Al Powder Technology. 247: 55-59. DOI: 10.1016/J.Powtec.2013.07.005 |
0.403 |
|
| 2013 |
Liu Y, Suslov S, Han Q, Hua L, Xu C. Comparison between ultrasonic vibration-assisted upsetting and conventional upsetting Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 3232-3244. DOI: 10.1007/S11661-013-1651-9 |
0.385 |
|
| 2013 |
Payzant EA, Agnew SR, Han Q, Viswanathan S. Mg17Al12 Phase Precipitation Kinetics in Die Casting Alloys AZ91D and AM60B Magnesium Technology. 183-187. DOI: 10.1002/9781118805497.Ch32 |
0.369 |
|
| 2013 |
Han Q, Kenik EA, Agnew SR, Viswanathan S. Solidification Behavior of Commercial Magnesium Alloys Magnesium Technology. 81-86. DOI: 10.1002/9781118805497.Ch16 |
0.34 |
|
| 2012 |
Liu Y, Suslov S, Han Q, Xu C, Hua L. Microstructure of the pure copper produced by upsetting with ultrasonic vibration Materials Letters. 67: 52-55. DOI: 10.1016/J.Matlet.2011.08.086 |
0.356 |
|
| 2012 |
Liu Z, Han Q, Li J, Huang W. Effect of ultrasonic vibration on microstructural evolution of the reinforcements and degassing of in situ TiB2p/Al–12Si–4Cu composites Journal of Materials Processing Technology. 212: 365-371. DOI: 10.1016/J.Jmatprotec.2011.09.021 |
0.438 |
|
| 2012 |
Liu Z, Han Q, Li J. A developed method for producing in situ TiC/Al composites by using quick preheating treatment and ultrasonic vibration Composites Part B: Engineering. 43: 2429-2433. DOI: 10.1016/J.Compositesb.2011.11.004 |
0.435 |
|
| 2012 |
Liu ZW, Han Q, Li JG. Formation of Small Blocky Al3Ti Particles via Direct Reaction Between Solid Ti Powders and Liquid Al Metallurgical and Materials Transactions A. 43: 4460-4463. DOI: 10.1007/S11661-012-1326-Y |
0.451 |
|
| 2012 |
Liu ZW, Rakita M, Han Q, Li JG. A developed method for fabricating in-situ ticp /mg composites by using quick preheating treatment and ultrasonic vibration Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 2116-2124. DOI: 10.1007/S11661-011-1041-0 |
0.764 |
|
| 2012 |
Song J, DenOuden T, Han Q. Mechanisms of Soldering Formation on Coated Core Pins Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 43: 415-421. DOI: 10.1007/S11661-011-0865-Y |
0.372 |
|
| 2011 |
Liu ZW, Rakita M, Han Q, Li JG. Microstructural evolution of reinforcements in the remelting in situ TiC/Al-12Si composites treated by ultrasonic vibration Materials Research Bulletin. 46: 1674-1678. DOI: 10.1016/J.Materresbull.2011.06.003 |
0.753 |
|
| 2011 |
Song C, Guo Y, Zhang Y, Zheng H, Yan M, Han Q, Zhai Q. Effect of currents on the microstructure of directionally solidified Al–4.5 wt% Cu alloy Journal of Crystal Growth. 324: 235-242. DOI: 10.1016/J.Jcrysgro.2011.03.025 |
0.365 |
|
| 2011 |
Liu Z, Han Q, Li J. Ultrasound assisted in situ technique for the synthesis of particulate reinforced aluminum matrix composites Composites Part B: Engineering. 42: 2080-2084. DOI: 10.1016/J.Compositesb.2011.04.004 |
0.42 |
|
| 2011 |
Zhang Y, Song C, Zhu L, Zheng H, Zhong H, Han Q, Zhai Q. Influence of Electric-Current Pulse Treatment on the Formation of Regular Eutectic Morphology in an Al-Si Eutectic Alloy Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 42: 604-611. DOI: 10.1007/S11663-011-9502-9 |
0.371 |
|
| 2011 |
Allen C, Han Q. Grain Refinement of Pure Aluminum Using Ultrasonics International Journal of Metalcasting. 5: 69-70. DOI: 10.1007/Bf03355511 |
0.361 |
|
| 2010 |
Han Q, Xu H, Ried P, Olson P. Accelerated method for testing soldering tendency of core pins International Journal of Cast Metals Research. 23: 296-302. DOI: 10.1179/136404610X12693537270217 |
0.301 |
|
| 2010 |
Dai Y, Yang M, Song C, Han Q, Zhai Q. Solidification structure of C2.08Cr25.43Si1.19Mn0.43Fe70.87 powders fabricated by high pressure gas atomization Materials Characterization. 61: 116-122. DOI: 10.1016/J.Matchar.2009.11.001 |
0.304 |
|
| 2009 |
Rakita M, Kakas D, Skoric B, Tomovic M, Han Q, Jackson M. S-type cultivator tines which comply with ISO standard: FEM analysis of stresses and manufacturing issues Proceedings of the Asme International Manufacturing Science and Engineering Conference 2009, Msec2009. 1: 373-380. DOI: 10.1115/MSEC2009-84162 |
0.706 |
|
| 2009 |
Rakita M, Han Q. Simulation of solidification defects for prediction of dross formation in aluminum 5182 remelt secondary ingot Proceedings of the Asme International Manufacturing Science and Engineering Conference 2009, Msec2009. 1: 365-371. DOI: 10.1115/MSEC2009-84160 |
0.696 |
|
| 2009 |
Gao D, Li Z, Han Q, Zhai Q. Effect of ultrasonic power on microstructure and mechanical properties of AZ91 alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 502: 2-5. DOI: 10.1016/J.Msea.2008.12.005 |
0.393 |
|
| 2008 |
He F, Han Q, Jackson MJ. Nanoparticulate reinforced metal matrix nanocomposites – a review International Journal of Nanoparticles. 1: 301-309. DOI: 10.1504/Ijnp.2008.026473 |
0.344 |
|
| 2008 |
Xu H, Han Q, Meek TT. Effects of ultrasonic vibration on degassing of aluminum alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 473: 96-104. DOI: 10.1016/J.Msea.2007.04.040 |
0.358 |
|
| 2008 |
Zhang S, Liu Z, Han Q. Thermodynamic Modeling of the Succinonitrile-Water System Journal of Phase Equilibria and Diffusion. 29: 247-251. DOI: 10.1007/S11669-008-9283-2 |
0.316 |
|
| 2007 |
Zhang S, Han Q, Liu Z. Fundamental understanding of Na-induced high temperature embrittlement in Al–Mg alloys Philosophical Magazine. 87: 147-157. DOI: 10.1080/14786430600941587 |
0.408 |
|
| 2007 |
Xu H, Meek TT, Han Q. Effects of ultrasonic field and vacuum on degassing of molten aluminum alloy Materials Letters. 61: 1246-1250. DOI: 10.1016/J.Matlet.2006.07.012 |
0.397 |
|
| 2007 |
Zhang S, Han Q, Liu Z. Thermodynamic Investigation of Alkali‐Metal‐Induced High Temperature Embrittlement in Al‐Li Alloys Advanced Engineering Materials. 9: 981-986. DOI: 10.1002/Adem.200700183 |
0.428 |
|
| 2007 |
Cui Y, Xu C, Han Q. Microstructure Improvement in Weld Metal Using Ultrasonic Vibrations Advanced Engineering Materials. 9: 161-163. DOI: 10.1002/Adem.200600228 |
0.363 |
|
| 2006 |
Cui Y, Xu C, Han Q. Effect of ultrasonic vibration on unmixed zone formation Scripta Materialia. 55: 975-978. DOI: 10.1016/J.Scriptamat.2006.08.035 |
0.329 |
|
| 2006 |
Xu H, Xu LD, Zhang SJ, Han Q. Effect of the alloy composition on the grain refinement of aluminum alloys Scripta Materialia. 54: 2191-2196. DOI: 10.1016/J.Scriptamat.2006.02.035 |
0.381 |
|
| 2006 |
Jian X, Meek TT, Han Q. Refinement of eutectic silicon phase of aluminum A356 alloy using high-intensity ultrasonic vibration Scripta Materialia. 54: 893-896. DOI: 10.1016/J.Scriptamat.2005.11.004 |
0.366 |
|
| 2006 |
Zhang S, Han Q, Liu Z. Thermodynamic modeling of the Al–Mg–Na system Journal of Alloys and Compounds. 419: 91-97. DOI: 10.1016/J.Jallcom.2005.10.002 |
0.329 |
|
| 2006 |
Xu C, Chen J, Cui Y, Han Q, Choo H, Liaw PK, Wu D. Influence of the Surface Treatment on the Deposition of Platinum Nanoparticles on the Carbon Nanotubes Advanced Engineering Materials. 8: 73-77. DOI: 10.1002/Adem.200500179 |
0.306 |
|
| 2005 |
Han Q, Xu H. Fluidity of alloys under high pressure die casting conditions Scripta Materialia. 53: 7-10. DOI: 10.1016/J.Scriptamat.2005.03.025 |
0.374 |
|
| 2005 |
Jian X, Xu H, Meek TT, Han Q. Effect of power ultrasound on solidification of aluminum A356 alloy Materials Letters. 59: 190-193. DOI: 10.1016/J.Matlet.2004.09.027 |
0.401 |
|
| 2005 |
Han Q, Hassan MI, Saito K, Viswanathan S, Das SK. The Reheating-Cooling Method: A Technique for Measuring Mechanical Properties in the Nonequilibrium Mushy Zones of Alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 36: 2073-2080. DOI: 10.1007/S11661-005-0328-4 |
0.408 |
|
| 2004 |
Han Q, Kad BK, Viswanathan S. Design perspectives for creep-resistant magnesium die-casting alloys Philosophical Magazine. 84: 3843-3860. DOI: 10.1080/14786430412331283073 |
0.378 |
|
| 2004 |
Han Q, Viswanathan S. The use of thermodynamic simulation for the selection of hypoeutectic aluminum-silicon alloys for semi-solid metal processing Materials Science and Engineering A. 364: 48-54. DOI: 10.1016/J.Msea.2003.06.002 |
0.42 |
|
| 2004 |
Xu H, Jian X, Meek TT, Han Q. Degassing of molten aluminum A356 alloy using ultrasonic vibration Materials Letters. 58: 3669-3673. DOI: 10.1016/J.Matlet.2004.02.055 |
0.376 |
|
| 2003 |
Han Q, Simpson W, Zeh J, Hatfield E, Sikka VK. Dross formation during remelting of aluminum 5182 remelt secondary ingot (RSI) Materials Science and Engineering A. 363: 9-14. DOI: 10.1016/S0921-5093(03)00615-4 |
0.386 |
|
| 2003 |
Han Q, Viswanathan S, Duncan AJ. Permeability measurements of the flow of interdendritic liquid in equiaxed aluminum-silicon alloys Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 34: 25-28. DOI: 10.1007/S11663-003-0051-8 |
0.352 |
|
| 2003 |
Han Q, Viswanathan S. Analysis of the mechanism of die soldering in aluminum die casting Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 139-146. DOI: 10.1007/S11661-003-0215-9 |
0.396 |
|
| 2002 |
Han Q, Viswanathan S. Hydrogen evolution during directional solidification and its effect on porosity formation in aluminum alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 2067-2072. DOI: 10.1007/S11661-002-0038-0 |
0.322 |
|
| 2001 |
Han Q, Viswanathan S, Spainhower DL, Das SK. The nature of surface cracking in direct chill cast aluminum alloy ingots Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 32: 2908-2910. DOI: 10.1007/S11661-001-1043-4 |
0.31 |
|
| 1999 |
Duncan AJ, Han Q, Viswanathan S. Measurement of Liquid Permeability in the Mushy Zones of Aluminum-Copper Alloys Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 30: 745-750. DOI: 10.1007/S11663-999-0036-3 |
0.352 |
|
| 1997 |
Han Q, Hunt JD. Numerical modelling of the growth of a cellular/dendritic array in multi-component alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 238: 192-195. DOI: 10.1016/S0921-5093(97)00447-4 |
0.349 |
|
| 1997 |
Han Q, Hellawell A. Primary Particle Melting Rates and Equiaxed Grain Nucleation Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 28: 169-173. DOI: 10.1007/S11663-997-0139-7 |
0.347 |
|
| 1997 |
Han Q, Hu H, Zhong X. Models for the isothermal coarsening of secondary dendrite arms in multicomponent alloys Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 28: 1185-1187. DOI: 10.1007/S11663-997-0074-7 |
0.356 |
|
| 1995 |
Han Q, Hunt JD. Redistribution of Particles during Solidification Isij International. 35: 693-699. DOI: 10.2355/Isijinternational.35.693 |
0.331 |
|
| 1994 |
Han Q, Hunt JD. Particle pushing: the attachment of particles on the solid-liquid interface during fluid flow Journal of Crystal Growth. 140: 406-413. DOI: 10.1016/0022-0248(94)90317-4 |
0.303 |
|
| 1994 |
Han Q, Hunt JD. Particle pushing: the concentration of particles near a solid interface during downward flow Journal of Crystal Growth. 140: 398-405. DOI: 10.1016/0022-0248(94)90316-6 |
0.33 |
|
| 1993 |
Han Q, Hunt JD. Particle pushing: the distribution of particles in liquid near a solid surface Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 173: 221-225. DOI: 10.1016/0921-5093(93)90219-5 |
0.335 |
|
| Show low-probability matches. |