| Year |
Citation |
Score |
| 2020 |
Shao Y, Billington SL. Flexural performance of steel-reinforced engineered cementitious composites with different reinforcing ratios and steel types Construction and Building Materials. 231: 117159. DOI: 10.1016/J.Conbuildmat.2019.117159 |
0.516 |
|
| 2019 |
Shao Y, Billington SL. Predicting the two predominant flexural failure paths of longitudinally reinforced high-performance fiber-reinforced cementitious composite structural members Engineering Structures. 199: 109581. DOI: 10.1016/J.Engstruct.2019.109581 |
0.505 |
|
| 2019 |
Nguyen W, Bandelt MJ, Trono W, Billington SL, Ostertag CP. Mechanics and failure characteristics of hybrid fiber-reinforced concrete (HyFRC) composites with longitudinal steel reinforcement Engineering Structures. 183: 243-254. DOI: 10.1016/J.Engstruct.2018.12.087 |
0.579 |
|
| 2018 |
Bandelt MJ, Billington SL. Simulation of Deformation Capacity in Reinforced High-Performance Fiber-Reinforced Cementitious Composite Flexural Members Journal of Structural Engineering-Asce. 144: 4018188. DOI: 10.1061/(Asce)St.1943-541X.0002174 |
0.529 |
|
| 2018 |
Frank TE, Lepech MD, Billington SL. Experimental Testing of Reinforced ECC Beams Subjected to Various Cyclic Deformation Histories Journal of Structural Engineering-Asce. 144: 4018052. DOI: 10.1061/(Asce)St.1943-541X.0002034 |
0.433 |
|
| 2018 |
Li RJ, Gutierrez J, Chung Y, Frank CW, Billington SL, Sattely ES. A lignin-epoxy resin derived from biomass as an alternative to formaldehyde-based wood adhesives Green Chemistry. 20: 1459-1466. DOI: 10.1039/C7Gc03026F |
0.357 |
|
| 2017 |
Frank TE, Lepech MD, Billington SL. Experimental testing of reinforced concrete and reinforced ECC flexural members subjected to various cyclic deformation histories Materials and Structures. 50: 232. DOI: 10.1617/S11527-017-1102-Y |
0.531 |
|
| 2017 |
Ryan CA, Billington SL, Criddle CS. Methodology to assess end-of-life anaerobic biodegradation kinetics and methane production potential for composite materials Composites Part a: Applied Science and Manufacturing. 95: 388-399. DOI: 10.1016/J.Compositesa.2017.01.014 |
0.426 |
|
| 2017 |
Bandelt MJ, Frank TE, Lepech MD, Billington SL. Bond behavior and interface modeling of reinforced high-performance fiber-reinforced cementitious composites Cement & Concrete Composites. 83: 188-201. DOI: 10.1016/J.Cemconcomp.2017.07.017 |
0.528 |
|
| 2017 |
Ryan CA, Billington SL, Criddle CS. Biocomposite Fiber-Matrix Treatments that Enhance In-Service Performance Can Also Accelerate End-of-Life Fragmentation and Anaerobic Biodegradation to Methane Journal of Polymers and the Environment. 26: 1715-1726. DOI: 10.1007/S10924-017-1068-4 |
0.392 |
|
| 2016 |
Bandelt MJ, Billington SL. Bond behavior of steel reinforcement in high-performance fiber-reinforced cementitious composite flexural members Materials and Structures/Materiaux Et Constructions. 49: 71-86. DOI: 10.1617/S11527-014-0475-4 |
0.565 |
|
| 2016 |
Bandelt MJ, Billington SL. Impact of Reinforcement Ratio and Loading Type on the Deformation Capacity of High-Performance Fiber-Reinforced Cementitious Composites Reinforced with Mild Steel Journal of Structural Engineering (United States). 142. DOI: 10.1061/(Asce)St.1943-541X.0001562 |
0.585 |
|
| 2015 |
Srubar WV, Billington SL. Special issue on "biobased construction materials" in the journal of renewable materials Journal of Renewable Materials. 3: 161-162. DOI: 10.7569/Jrm.2015.634113 |
0.373 |
|
| 2015 |
Miller SA, Lepech MD, Billington SL. Static versus time-dependent material selection charts and application in wood flour composites Journal of Biobased Materials and Bioenergy. 9: 273-283. DOI: 10.1166/jbmb.2015.1517 |
0.338 |
|
| 2015 |
Miller SA, Srubar WV, Billington SL, Lepech MD. Integrating durability-based service-life predictions with environmental impact assessments of natural fiber-reinforced composite materials Resources, Conservation and Recycling. 99: 72-83. DOI: 10.1016/J.Resconrec.2015.04.004 |
0.431 |
|
| 2014 |
Kyriakides MA, Billington SL. Behavior of unreinforced masonry prisms and beams retrofitted with engineered cementitious composites Materials and Structures/Materiaux Et Constructions. 47: 1573-1587. DOI: 10.1617/S11527-013-0138-X |
0.49 |
|
| 2014 |
Flint M, Michel A, Billington SL, Geiker MR. Influence of temporal resolution and processing of exposure data on modeling of chloride ingress and reinforcement corrosion in concrete Materials and Structures/Materiaux Et Constructions. 47: 729-748. DOI: 10.1617/S11527-013-0091-8 |
0.322 |
|
| 2014 |
Eatherton MR, Ma X, Krawinkler H, Mar D, Billington S, Hajjar JF, Deierlein GG. Design concepts for controlled rocking of self-centering steel-braced frames Journal of Structural Engineering (United States). 140. DOI: 10.1061/(Asce)St.1943-541X.0001047 |
0.378 |
|
| 2014 |
Lignos DG, Moreno DM, Billington SL. Seismic retrofit of steel moment-resisting frames with high-performance fiber-reinforced concrete infill panels: Large-scale hybrid simulation experiments Journal of Structural Engineering (United States). 140. DOI: 10.1061/(Asce)St.1943-541X.0000877 |
0.475 |
|
| 2014 |
Kyriakides MA, Billington SL. Cyclic response of nonductile reinforced concrete frames with unreinforced masonry infills retrofitted with engineered cementitious composites Journal of Structural Engineering (United States). 140. DOI: 10.1061/(Asce)St.1943-541X.0000833 |
0.561 |
|
| 2014 |
Michel AT, Billington SL. Nonlinear constitutive model for anisotropic biobased composite materials Journal of Engineering Mechanics. 140. DOI: 10.1061/(Asce)Em.1943-7889.0000773 |
0.526 |
|
| 2014 |
Flint MM, Baker JW, Billington SL. A modular framework for performance-based durability engineering: From exposure to impacts Structural Safety. 50: 78-93. DOI: 10.1016/J.Strusafe.2014.03.003 |
0.333 |
|
| 2014 |
Miller SA, Billington SL, Lepech MD. Influence of carbon feedstock on potentially net beneficial environmental impacts of bio-based composites Journal of Cleaner Production. DOI: 10.1016/J.Jclepro.2015.11.047 |
0.467 |
|
| 2014 |
Srubar WV, Miller SA, Lepech MD, Billington SL. Incorporating spatiotemporal effects and moisture diffusivity into a multi-criteria materials selection methodology for wood-polymer composites Construction and Building Materials. 71: 589-601. DOI: 10.1016/J.Conbuildmat.2014.08.049 |
0.41 |
|
| 2014 |
Moreno DM, Trono W, Jen G, Ostertag C, Billington SL. Tension stiffening in reinforced high performance fiber reinforced cement-based composites Cement and Concrete Composites. 50: 36-46. DOI: 10.1016/J.Cemconcomp.2014.03.004 |
0.583 |
|
| 2014 |
Cheikh RB, Michel A, Billington S. Mechanical characterization and modeling of poly (β‐hydroxybutyrate)‐co‐poly(β‐hydroxyvalerate)–Alfa fiber‐reinforced composites Polymer Composites. 35: 1758-1766. DOI: 10.1002/Pc.22829 |
0.55 |
|
| 2014 |
Bandelt MJ, Billington SL. Simulating bond-slip effects in high-performance fiber-reinforced cement based composites under cyclic loads Computational Modelling of Concrete Structures - Proceedings of Euro-C 2014. 2: 1059-1066. |
0.424 |
|
| 2013 |
Miller SA, Lepech MD, Billington SL. Evaluation of Functional Units Including Time-Dependent Properties for Environmental Impact Modeling of Biobased Composites Journal of Biobased Materials and Bioenergy. 7: 588-599. DOI: 10.1166/Jbmb.2013.1388 |
0.348 |
|
| 2013 |
Koutromanos I, Kyriakides M, Stavridis A, Billington S, Shing PB. Shake-table tests of a 3-story masonry-infilled RC frame retrofitted with composite materials Journal of Structural Engineering (United States). 139: 1340-1351. DOI: 10.1061/(Asce)St.1943-541X.0000689 |
0.558 |
|
| 2013 |
Gencturk B, Elnashai AS, Lepech MD, Billington S. Behavior of concrete and ECC structures under simulated earthquake motion Journal of Structural Engineering (United States). 139: 389-399. DOI: 10.1061/(Asce)St.1943-541X.0000667 |
0.565 |
|
| 2013 |
Chung YL, Olsson JV, Li RJ, Frank CW, Waymouth RM, Billington SL, Sattely ES. A renewable lignin-lactide copolymer and application in biobased composites Acs Sustainable Chemistry and Engineering. 1: 1231-1238. DOI: 10.1021/Sc4000835 |
0.329 |
|
| 2013 |
Miller SA, Lepech MD, Billington SL. Application of multi-criteria material selection techniques to constituent refinement in biobased composites Materials and Design. 52: 1043-1051. DOI: 10.1016/J.Matdes.2013.06.046 |
0.531 |
|
| 2013 |
Miller SA, Billington SL, Lepech MD. Improvement in environmental performance of poly(β-hydroxybutyrate)- co-(β-hydroxyvalerate) composites through process modifications Journal of Cleaner Production. 40: 190-198. DOI: 10.1016/J.Jclepro.2012.08.033 |
0.436 |
|
| 2013 |
Srubar WV, Billington SL. A micromechanical model for moisture-induced deterioration in fully biorenewable wood-plastic composites Composites Part a: Applied Science and Manufacturing. 50: 81-92. DOI: 10.1016/J.Compositesa.2013.02.001 |
0.504 |
|
| 2012 |
Kyriakides MA, Hendriks MAN, Billington SL. Simulation of Unreinforced Masonry Beams Retrofitted with Engineered Cementitious Composites in Flexure Journal of Materials in Civil Engineering. 24: 506-515. DOI: 10.1061/(Asce)Mt.1943-5533.0000412 |
0.518 |
|
| 2012 |
Srubar WV, Frank CW, Billington SL. Modeling the kinetics of water transport and hydroexpansion in a lignocellulose-reinforced bacterial copolyester Polymer. 53: 2152-2161. DOI: 10.1016/J.Polymer.2012.03.036 |
0.326 |
|
| 2012 |
Michel AT, Billington SL. Characterization of poly-hydroxybutyrate films and hemp fiber reinforced composites exposed to accelerated weathering Polymer Degradation and Stability. 97: 870-878. DOI: 10.1016/J.Polymdegradstab.2012.03.040 |
0.485 |
|
| 2012 |
Srubar WV, Pilla S, Wright ZC, Ryan CA, Greene JP, Frank CW, Billington SL. Mechanisms and impact of fiber-matrix compatibilization techniques on the material characterization of PHBV/oak wood flour engineered biobased composites Composites Science and Technology. 72: 708-715. DOI: 10.1016/J.Compscitech.2012.01.021 |
0.475 |
|
| 2012 |
Christian SJ, Billington SL. Moisture diffusion and its impact on uniaxial tensile response of biobased composites Composites Part B: Engineering. 43: 2303-2312. DOI: 10.1016/J.Compositesb.2011.11.063 |
0.449 |
|
| 2012 |
Moreno DM, Trono W, Jen G, Ostertag C, Billington SL. Tension-stiffening in reinforced high performance fiber-reinforced cement-based composites under direct tension Rilem Bookseries. 2: 263-270. DOI: 10.1007/978-94-007-2436-5_32 |
0.443 |
|
| 2011 |
Srubar WV, Michel AT, Criddle CS, Frank CW, Billington SL. Engineered biomaterials for construction: A cradle-to-cradle design methodology for green material development International Journal of Environmental, Cultural, Economic and Social Sustainability. 7: 157-166. DOI: 10.18848/1832-2077/Cgp/V07I05/54992 |
0.363 |
|
| 2011 |
Douglas KS, Billington SL. Strain rate dependence of HPFRCC cylinders in monotonic tension Materials and Structures/Materiaux Et Constructions. 44: 391-404. DOI: 10.1617/S11527-010-9634-4 |
0.499 |
|
| 2011 |
Olsen EC, Billington SL. Cyclic response of precast high-performance fiber-reinforced concrete infill panels Aci Structural Journal. 108: 51-60. DOI: 10.14359/51664202 |
0.573 |
|
| 2011 |
Flint MM, Billington SL. A probabilistic framework for performance-based durability engineering: Application to corrosion in reinforced concrete Structures Congress 2011 - Proceedings of the 2011 Structures Congress. 1949-1960. DOI: 10.1061/41171(401)170 |
0.303 |
|
| 2011 |
Srubar WV, Billington SL. Engineered biobased composites for construction: Material development, multiscale modeling, and long-term durability Structures Congress 2011 - Proceedings of the 2011 Structures Congress. 1147-1156. DOI: 10.1061/41171(401)102 |
0.439 |
|
| 2011 |
Christian SJ, Billington SL. Mechanical response of PHB- and cellulose acetate natural fiber-reinforced composites for construction applications Composites Part B: Engineering. 42: 1920-1928. DOI: 10.1016/J.Compositesb.2011.05.039 |
0.519 |
|
| 2011 |
Lee WK, Billington SL. Performance-based earthquake engineering assessment of a self-centering, post-tensioned concrete bridge system Earthquake Engineering and Structural Dynamics. 40: 887-902. DOI: 10.1002/Eqe.1065 |
0.398 |
|
| 2011 |
Lignos DG, Moreno-Luna DM, Billington SL. Seismic retrofit of existing steel moment resisting frames with innovative materials: Large scale hybrid simulation tests Eccomas Thematic Conference - Compdyn 2011: 3rd International Conference On Computational Methods in Structural Dynamics and Earthquake Engineering: An Iacm Special Interest Conference, Programme. |
0.351 |
|
| 2010 |
Lee WK, Billington SL. Modeling residual displacements of concrete bridge columns under earthquake loads using fiber elements Journal of Bridge Engineering. 15: 240-249. DOI: 10.1061/(Asce)Be.1943-5592.0000059 |
0.521 |
|
| 2010 |
Lignos DG, Billington SL. Hybrid testing of a steel moment resisting frame retrofitted with high performance fiber reinforced concrete infill panels 9th Us National and 10th Canadian Conference On Earthquake Engineering 2010, Including Papers From the 4th International Tsunami Symposium. 2: 850-859. |
0.398 |
|
| 2009 |
Lignos DG, Molina-Hunt C, Krebs AD, Billington SL. Comparison of retrofitting techniques for existing steel moment resisting frames Improving the Seismic Performance of Existing Buildings and Other Structures - Proc. 2009 Atc and Sei Conference On Improving the Seismic Performance of Existing Buildings and Other Structures. 988-999. DOI: 10.1061/41084(364)90 |
0.31 |
|
| 2009 |
Billington SL, Kyriakides MA, Blackard B, Willam K, Stavridis A, Shing PB. Evaluation of a sprayable, ductile cement-based composite for the seismic retrofit of unreinforced masonry infills Improving the Seismic Performance of Existing Buildings and Other Structures - Proc. 2009 Atc and Sei Conference On Improving the Seismic Performance of Existing Buildings and Other Structures. 823-834. DOI: 10.1061/41084(364)75 |
0.496 |
|
| 2009 |
Shing PB, Stavridis A, Koutromanos I, Willam K, Blackard B, Kyriakides MA, Billington SL, Arnold S. Seismic performance of non-ductile RC frames with brick infill Improving the Seismic Performance of Existing Buildings and Other Structures - Proc. 2009 Atc and Sei Conference On Improving the Seismic Performance of Existing Buildings and Other Structures. 1117-1128. DOI: 10.1061/41084(364)102 |
0.541 |
|
| 2009 |
Schrass-Christian SJ, Billington SL. Impact of moisture on biobased composites for construction applications International Sampe Symposium and Exhibition (Proceedings). 54. |
0.403 |
|
| 2009 |
Billington SL. Evaluation of sequentially linear finite element analysis to simulate nonlinear response of cement-based composites American Concrete Institute, Aci Special Publication. 265-282. |
0.376 |
|
| 2007 |
Rouse JM, Billington SL. Creep and shrinkage of high-performance fiber-reinforced cementitious composites Aci Materials Journal. 104: 129-136. DOI: 10.14359/18575 |
0.791 |
|
| 2006 |
Douglas KS, Billington SL. Modeling the impact of rate dependence in HPFRCC materials on the behavior of infill panels 8th Us National Conference On Earthquake Engineering 2006. 8: 4322-4331. |
0.412 |
|
| 2006 |
Lee WK, Billington SL. Analytical assessment of the post-earthquake condition of self-centering versus traditional concrete bridge pier systems Proceedings of the 3rd International Conference On Bridge Maintenance, Safety and Management - Bridge Maintenance, Safety, Management, Life-Cycle Performance and Cost. 615-616. |
0.322 |
|
| 2006 |
Lee WK, Billington SL. Simulation of self-centering, segmentally precast concrete columns for a probabilistic, performance-based assessment Computational Modelling of Concrete Structures - Proceedings of Euro-C 2006. 731-738. |
0.356 |
|
| 2006 |
Matsuki S, Billington SL, Baker JW. Impact of long-term material degradation on seismic performance of a reinforced concrete bridge 8th Us National Conference On Earthquake Engineering 2006. 3: 1683-1692. |
0.377 |
|
| 2005 |
Kesner K, Billington SL. Investigation of infill panels made from engineered cementitious composites for seismic strengthening and retrofit Journal of Structural Engineering. 131: 1712-1720. DOI: 10.1061/(Asce)0733-9445(2005)131:11(1712) |
0.77 |
|
| 2004 |
Billington SL, Yoon JK. Cyclic response of unbonded posttensioned precast columns with ductile fiber-reinforced concrete Journal of Bridge Engineering. 9: 353-363. DOI: 10.1061/(Asce)1084-0702(2004)9:4(353) |
0.511 |
|
| 2004 |
Han TS, Billington SL. Seismic analysis of reinforced concrete frame buildings using interface modeling Journal of Structural Engineering. 130: 1157-1168. DOI: 10.1061/(Asce)0733-9445(2004)130:8(1157) |
0.479 |
|
| 2003 |
Kesner KE, Billington SL. Experimental Response of Precast Infill Panel Connections and Panels Made with DFRCC Journal of Advanced Concrete Technology. 1: 327-333. DOI: 10.3151/Jact.1.327 |
0.766 |
|
| 2003 |
Billington SL, Rouse JM. Time-Dependent Response of Highly Ductile Fiber-Reinforced Cement-Based Composites Brittle Matrix Composites 7. 47-56. DOI: 10.1533/9780857093103.47 |
0.786 |
|
| 2003 |
Han TS, Feenstra PH, Billington SL. Simulation of Highly Ductile Fiber-Reinforced Cement-Based Composite Components Under Cyclic Loading Aci Structural Journal. 100: 749-757. DOI: 10.14359/12841 |
0.568 |
|
| 2003 |
Kesner KE, Billington SL, Douglas KS. Cyclic Response of Highly Ductile Fiber-Reinforced Cement-Based Composites Aci Materials Journal. 100: 381-390. DOI: 10.14359/12813 |
0.775 |
|
| 2003 |
Kwan WP, Billington SL. Unbonded posttensioned concrete bridge piers. I: Monotonic and cyclic analyses Journal of Bridge Engineering. 8: 92-101. DOI: 10.1061/(Asce)1084-0702(2003)8:2(92) |
0.694 |
|
| 2003 |
Kwan WP, Billington SL. Unbonded posttensioned concrete bridge piers. II: Seismic analyses Journal of Bridge Engineering. 8: 102-111. DOI: 10.1061/(Asce)1084-0702(2003)8:2(102) |
0.668 |
|
| 2003 |
Kwan WP, Billington SL. Influence of hysteretic behavior on equivalent period and damping of structural systems Journal of Structural Engineering. 129: 576-585. DOI: 10.1061/(Asce)0733-9445(2003)129:5(576) |
0.649 |
|
| 2003 |
Billington SL, Yoon JK. Behavior of ductile fiber-reinforced concrete hinge regions in bridge piers Proceedings of the Structures Congress and Exposition. 737-746. |
0.459 |
|
| 2002 |
Han TS, Ural A, Chen CS, Zehnder AT, Ingraffea AR, Billington SL. Delamination buckling and propagation analysis of honeycomb panels using a cohesive element approach International Journal of Fracture. 115: 101-123. DOI: 10.1023/A:1016333709040 |
0.416 |
|
| 2001 |
Billington SL, Barnes RW, Breen JE. Alternate substructure systems for standard highway bridges Journal of Bridge Engineering. 6: 87-94. DOI: 10.1061/(Asce)1084-0702(2001)6:2(87) |
0.356 |
|
| 2001 |
Kwan WP, Billington SL. Simulation of structural concrete under cyclic load Journal of Structural Engineering. 127: 1391-1401. DOI: 10.1061/(Asce)0733-9445(2001)127:12(1391) |
0.718 |
|
| 2000 |
Billington SL, Breen JE. Improving standard bridges with attention to cast-in-place substructure Journal of Bridge Engineering. 5: 344-351. DOI: 10.1061/(Asce)1084-0702(2000)5:4(344) |
0.358 |
|
| 1999 |
Billington SL, Barnes RW, Breen JE. A Precast Segmental Substructure System For Standard Bridges Pci Journal. 44: 56-73. DOI: 10.15554/Pcij.07011999.56.73 |
0.427 |
|
| 1999 |
Billington SL, Barnes RW, Breen JE. A precast segmental substructure system for standard bridges Pci Journal. 44: 56-73. |
0.319 |
|
| Show low-probability matches. |