| Year |
Citation |
Score |
| 2020 |
Zheng Y, Antonov S, Feng Q, Banerjee R, Banerjee D, Fraser HL. Shuffle-induced modulated structure and heating-induced ordering in the metastable β-titanium alloy, Ti-5Al-5Mo-5V-3Cr Scripta Materialia. 176: 7-11. DOI: 10.1016/J.Scriptamat.2019.09.027 |
0.435 |
|
| 2020 |
Antonov S, Kloenne Z, Gao Y, Wang D, Feng Q, Wang Y, Fraser HL, Zheng Y. Novel deformation twinning system in a cold rolled high-strength metastable-β Ti-5Al-5V-5Mo-3Cr-0.5Fe alloy Materialia. 9: 100614. DOI: 10.1016/J.Mtla.2020.100614 |
0.477 |
|
| 2020 |
Fu C, Chen Y, Li L, Antonov S, Feng Q. Evaluation of service conditions of high pressure turbine blades made of DS Ni-base superalloy by artificial neural networks Materials Today Communications. 22: 100838. DOI: 10.1016/J.Mtcomm.2019.100838 |
0.317 |
|
| 2020 |
Zhuang X, Lu S, Li L, Feng Q. Microstructures and properties of a novel γ′-strengthened multi-component CoNi-based wrought superalloy designed by CALPHAD method Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 780: 139219. DOI: 10.1016/J.Msea.2020.139219 |
0.419 |
|
| 2020 |
Zhou H, Li L, Antonov S, Feng Q. Sub/micro-structural evolution of a Co–Al–W–Ta–Ti single crystal superalloy during creep at 900 °C and 420 MPa Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 772: 138791. DOI: 10.1016/J.Msea.2019.138791 |
0.431 |
|
| 2020 |
Guo X, Antonov S, Lu F, Zheng W, Yuan X, Cormier J, Feng Q. Solidification rate driven microstructural stability and its effect on the creep property of a polycrystalline nickel-based superalloy K465 Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 770: 138530. DOI: 10.1016/J.Msea.2019.138530 |
0.47 |
|
| 2020 |
He J, Zou M, Li L, Wang X, Feng Q. Creep behaviour of a novel CoNi-base single-crystal superalloy at high temperature and low stress Materials Letters. 262: 127042. DOI: 10.1016/J.Matlet.2019.127042 |
0.49 |
|
| 2020 |
Wang C, Xue F, Li X, Chen Y, Deng Q, Li A, Long H, Mao S, Li W, Yang L, Feng Q, Han X. Multidimensional microscopic investigation of oxidation-induced hollow cavities in a Co–Al–W–Ti–Ta alloy nanotip by electron tomography Journal of Alloys and Compounds. 848: 156243. DOI: 10.1016/J.Jallcom.2020.156243 |
0.468 |
|
| 2020 |
Li W, Li L, Antonov S, Lu F, Feng Q. Effects of Cr and Al/W ratio on the microstructural stability, oxidation property and γ′ phase nano-hardness of multi-component Co–Ni-base superalloys Journal of Alloys and Compounds. 826: 154182. DOI: 10.1016/J.Jallcom.2020.154182 |
0.488 |
|
| 2020 |
Li X, Zhao Y, Xue F, Yang X, Chen Y, Wang C, Deng Q, Li A, Feng Q. In situ oxidation analysis on Co-Al-W-Ti-Ta single-crystal alloy in an environmental TEM Corrosion Science. 172: 108725. DOI: 10.1016/J.Corsci.2020.108725 |
0.392 |
|
| 2020 |
Lu S, Antonov S, Li L, Liu C, Zhang X, Zheng Y, Fraser HL, Feng Q. Atomic structure and elemental segregation behavior of creep defects in a Co-Al-W-based single crystal superalloys under high temperature and low stress Acta Materialia. 190: 16-28. DOI: 10.1016/J.Actamat.2020.03.015 |
0.432 |
|
| 2020 |
He J, Yu Z, Li L, Wang X, Feng Q. Effect of grit blasting and subsequent heat treatment on stress rupture property of a Ni-based single-crystal superalloy SGX3 Acta Metallurgica Sinica (English Letters). 1-8. DOI: 10.1007/S40195-020-01051-X |
0.395 |
|
| 2019 |
Antonov S, Chen W, Lu S, Isheim D, Seidman DN, Feng Q, Sun E, Tin S. The effect of phosphorus on the formation of grain boundary laves phase in high-refractory content Ni-based superalloys Scripta Materialia. 161: 44-48. DOI: 10.1016/J.Scriptamat.2018.10.015 |
0.709 |
|
| 2019 |
Li W, Li L, Antonov S, Feng Q. Effective design of a Co-Ni-Al-W-Ta-Ti alloy with high γ′ solvus temperature and microstructural stability using combined CALPHAD and experimental approaches Materials & Design. 180: 107912. DOI: 10.1016/J.Matdes.2019.107912 |
0.466 |
|
| 2019 |
Fu C, Chen Y, Yuan X, Tin S, Antonov S, Yagi K, Feng Q. A modified θ projection model for constant load creep curves-II. Application of creep life prediction Journal of Materials Science & Technology. 35: 687-694. DOI: 10.1016/J.Jmst.2018.09.035 |
0.601 |
|
| 2019 |
Fu C, Chen Y, Yuan X, Tin S, Antonov S, Yagi K, Feng Q. A modified θ projection model for constant load creep curves-I. Introduction of the model Journal of Materials Science & Technology. 35: 223-230. DOI: 10.1016/J.Jmst.2018.09.024 |
0.61 |
|
| 2019 |
Guo X, Zheng W, Xiao C, Li L, Antonov S, Zheng Y, Feng Q. Evaluation of microstructural degradation in a failed gas turbine blade due to overheating Engineering Failure Analysis. 103: 308-318. DOI: 10.1016/J.Engfailanal.2019.04.021 |
0.351 |
|
| 2019 |
Zhao YS, Zhang J, Luo YS, Zhang B, Sha G, Li LF, Tang DZ, Feng Q. Improvement of grain boundary tolerance by minor additions of Hf and B in a second generation single crystal superalloy Acta Materialia. 176: 109-122. DOI: 10.1016/J.Actamat.2019.06.054 |
0.409 |
|
| 2019 |
Zhang Y, Li J, Wang WY, Li P, Tang B, Wang J, Kou H, Shang S, Wang Y, Kecskes LJ, Hui X, Feng Q, Liu Z. When a defect is a pathway to improve stability: a case study of the L12 Co3TM superlattice intrinsic stacking fault Journal of Materials Science. 54: 13609-13618. DOI: 10.1007/S10853-019-03884-Z |
0.316 |
|
| 2018 |
Shi Q, Huo J, Zheng Y, Feng Q. Influence of Mo and Ru additions on the creep behavior of Ni-based single crystal superalloys at 1100 °C Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 725: 148-159. DOI: 10.1016/J.Msea.2018.04.026 |
0.524 |
|
| 2018 |
Ding X, Li X, Huang H, Matthias W, Huang S, Feng Q. Effect of Mo addition on as-cast microstructures and properties of grey cast irons Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 718: 483-491. DOI: 10.1016/J.Msea.2018.01.095 |
0.331 |
|
| 2018 |
Zhang Y, Li M, Godlewski LA, Zindel JW, Feng Q. Effects of W on creep behaviors of novel Nb-bearing high nitrogen austenitic heat-resistant cast steels at 1000 °C Materials Characterization. 139: 19-29. DOI: 10.1016/J.Matchar.2018.02.027 |
0.488 |
|
| 2018 |
Wang WY, Xue F, Zhang Y, Shang S, Wang Y, Darling KA, Kecskes LJ, Li J, Hui X, Feng Q, Liu Z. Atomic and electronic basis for solutes strengthened (010) anti-phase boundary of L12 Co3(Al, TM): A comprehensive first-principles study Acta Materialia. 145: 30-40. DOI: 10.1016/J.Actamat.2017.10.041 |
0.345 |
|
| 2018 |
Huo JJ, Shi QY, Tin S, Li LF, Feng Q. Improvement of Creep Resistance at 950 °C and 400 MPa in Ru-Containing Single-Crystal Superalloys with a High Level of Co Addition Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 5298-5308. DOI: 10.1007/S11661-018-4842-6 |
0.642 |
|
| 2018 |
Lu S, Antonov S, Li L, Feng Q. Two Steady-State Creep Stages in Co-Al-W-Base Single-Crystal Superalloys at 1273 K/137 MPa Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 4079-4089. DOI: 10.1007/S11661-018-4776-Z |
0.412 |
|
| 2018 |
Antonov S, Chen W, Huo J, Feng Q, Isheim D, Seidman DN, Sun E, Tin S. MC Carbide Characterization in High Refractory Content Powder-Processed Ni-Based Superalloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 2340-2351. DOI: 10.1007/S11661-018-4587-2 |
0.696 |
|
| 2018 |
Antonov S, Huo J, Feng Q, Isheim D, Seidman DN, Sun E, Tin S. Comparison of Thermodynamic Predictions and Experimental Observations on B Additions in Powder-Processed Ni-Based Superalloys Containing Elevated Concentrations of Nb Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 729-739. DOI: 10.1007/S11661-017-4380-7 |
0.69 |
|
| 2018 |
Zhao H, Li M, Engler-Pinto CC, Godlewski LA, Zindel JW, Li L, Feng Q. Low Cycle Fatigue Behavior of Heat-Resistant Austenitic Cast Steels at 950 °C Steel Research International. 89: 1800059. DOI: 10.1002/Srin.201800059 |
0.328 |
|
| 2017 |
Chen Y, Xue F, Mao S, Long H, Zhang B, Deng Q, Chen B, Liu Y, Maguire P, Zhang H, Han X, Feng Q. Elemental preference and atomic scale site recognition in a Co-Al-W-base superalloy. Scientific Reports. 7: 17240. PMID 29222467 DOI: 10.1038/S41598-017-17456-1 |
0.366 |
|
| 2017 |
Antonov S, Huo J, Feng Q, Isheim D, Seidman DN, Helmink RC, Sun E, Tin S. The effect of Nb on grain boundary segregation of B in high refractory Ni-based superalloys Scripta Materialia. 138: 35-38. DOI: 10.1016/J.Scriptamat.2017.05.028 |
0.692 |
|
| 2017 |
Zhou HJ, Chang H, Feng Q. Transient minimum creep of a γ′ strengthened Co-base single-crystal superalloy at 900 °C Scripta Materialia. 135: 84-87. DOI: 10.1016/J.Scriptamat.2017.03.031 |
0.362 |
|
| 2017 |
Yu Z, Zheng Y, Feng Q. A quantitative approach to investigate discontinuous precipitation on grain boundary of Ni-based single crystal superalloys Scripta Materialia. 128: 23-26. DOI: 10.1016/J.Scriptamat.2016.09.031 |
0.394 |
|
| 2017 |
Zhao H, Engler-Pinto CC, Tong J, Godlewski LA, Zindel JW, Li L, Li M, Feng Q. Mechanical response and dislocation substructure of a cast austenitic steel under low cycle fatigue at elevated temperatures Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 703: 422-429. DOI: 10.1016/J.Msea.2017.07.030 |
0.381 |
|
| 2017 |
Antonov S, Huo J, Feng Q, Isheim D, Seidman DN, Helmink RC, Sun E, Tin S. σ and η Phase formation in advanced polycrystalline Ni-base superalloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 687: 232-240. DOI: 10.1016/J.Msea.2017.01.064 |
0.725 |
|
| 2017 |
Huo J, Shi Q, Zheng Y, Feng Q. Microstructural characteristics of σ phase and P phase in Ru-containing single crystal superalloys Materials Characterization. 124: 73-82. DOI: 10.1016/J.Matchar.2016.12.003 |
0.479 |
|
| 2017 |
Zhou HJ, Xue F, Chang H, Feng Q. Effect of Mo on microstructural characteristics and coarsening kinetics of γ' precipitates in Co-Al-W-Ta-Ti alloys Journal of Materials Science & Technology. 34: 799-805. DOI: 10.1016/J.Jmst.2017.04.012 |
0.477 |
|
| 2017 |
Ding X, Li X, Feng Q, Matthias W, Huang S. Microstructure evolution in grey cast iron during directional solidification International Journal of Minerals Metallurgy and Materials. 24: 884-890. DOI: 10.1007/S12613-017-1474-6 |
0.314 |
|
| 2017 |
Shi Q, An N, Huo J, Ding X, Zheng Y, Feng Q. Different Effect of Co on the Formation of Topologically Close-Packed Phases in Ni-Cr-Mo and Ni-Cr-Re Alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 5639-5648. DOI: 10.1007/S11661-017-4312-6 |
0.507 |
|
| 2017 |
Shi Q, An N, Huo J, Zheng Y, Feng Q. Effect of Co on Discontinuous Precipitation Transformation with TCP Phase in Ni-based Alloy Containing Re Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 2120-2126. DOI: 10.1007/S11661-017-4015-Z |
0.512 |
|
| 2017 |
Zhang Y, Li M, Godlewski LA, Zindel JW, Feng Q. Effects of N/C Ratio on Solidification Behaviors of Novel Nb-Bearing Austenitic Heat-Resistant Cast Steels for Exhaust Components of Gasoline Engines Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 1151-1162. DOI: 10.1007/S11661-016-3920-X |
0.413 |
|
| 2016 |
Ding XF, Chen XD, Li Q, Xiao CB, Ren WP, Feng Q. Effect of Salt-Deposit Hot Corrosion on Creep Rupture Behaviors of DZ466 Superalloy Materials Science Forum. 850: 56-65. DOI: 10.4028/Www.Scientific.Net/Msf.850.56 |
0.344 |
|
| 2016 |
Zhang Y, Li M, Godlewski LA, Zindel JW, Feng Q. Effects Of N On Creep Properties Of Austeni-Tic Heat-Resistant Cast Steels Developedfor Exhaust Component Applicationsat 1000 ℃ Acta Metallurgica Sinica. 52: 661-671. DOI: 10.11900/0412.1961.2015.00618 |
0.301 |
|
| 2016 |
Yu Z, Ding X, Cao L, Zheng Y, Feng Q. TRANSIENT LIQUID PHASE BONDING OF SECOND AND THIRD GERNERATION Ni-BASED SINGLE CRYSTAL SUPERALLOY WITH Hf-CONTAININGINTERLAYER ALLOY Acta Metallurgica Sinica. 52: 549-560. DOI: 10.11900/0412.1961.2015.00408 |
0.474 |
|
| 2016 |
Tong J, Ding X, Wang M, Yagi K, Zheng Y, Feng Q. Assessment of service induced degradation of microstructure and properties in turbine blades made of GH4037 alloy Journal of Alloys and Compounds. 657: 777-786. DOI: 10.1016/J.Jallcom.2015.10.071 |
0.358 |
|
| 2016 |
Ding Xf, Liu Df, Guo Pl, Zheng Yr, Feng Q. Solidification microstructure formation in HK40 and HH40 alloys International Journal of Minerals, Metallurgy and Materials. 23: 442-448. DOI: 10.1007/S12613-016-1254-8 |
0.431 |
|
| 2016 |
Zhang Y, Li M, Godlewski LA, Zindel JW, Feng Q. Creep Behavior at 1273 K (1000 °C) in Nb-Bearing Austenitic Heat-Resistant Cast Steels Developed for Exhaust Component Applications Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 47: 3289-3294. DOI: 10.1007/S11661-016-3544-1 |
0.381 |
|
| 2015 |
Tong J, Feng W, Fu C, Zheng Y, Feng Q. Microstructural Degradation And Mechani- Cal Properties Of Gh4033 Alloy After Overheating For Short Time Acta Metallurgica Sinica. 51: 1242-1252. DOI: 10.11900/0412.1961.2015.00265 |
0.403 |
|
| 2015 |
Ding X, Liu D, Zheng Y, Feng Q. Effect Of B Micro-Alloying On Micro-Porosities In As-Cast Hk40 Alloys Acta Metallurgica Sinica. 51: 1121-1128. DOI: 10.11900/0412.1961.2015.00126 |
0.42 |
|
| 2015 |
Xue F, Zhou HJ, Shi QY, Chen XH, Chang H, Wang ML, Feng Q. Creep behavior in a γ′ strengthened Co–Al–W–Ta–Ti single-crystal alloy at 1000 °C Scripta Materialia. 97: 37-40. DOI: 10.1016/J.Scriptamat.2014.10.015 |
0.469 |
|
| 2015 |
Zhao H, Engler-Pinto CC, Zindel J, Godlewski L, Zhang Y, Feng Q, Li M. The Effect of Metal-Carbide Morphology on the Thermomechanical Fatigue (TMF) Behavior of Cast Austenitic Alloys for Exhaust Manifolds Procedia Engineering. 133: 669-680. DOI: 10.1016/J.Proeng.2015.12.648 |
0.438 |
|
| 2015 |
Lv X, Zhang J, Feng Q. The promotion of Ru on topologically close-packed phase precipitation in the high Cr-containing (∼9wt.%) nickel-base single crystal superalloy Journal of Alloys and Compounds. 648: 853-857. DOI: 10.1016/J.Jallcom.2015.07.055 |
0.475 |
|
| 2015 |
Sun F, Tong J, Feng Q, Zhang J. Microstructural evolution and deformation features in gas turbine blades operated in-service Journal of Alloys and Compounds. 618: 728-733. DOI: 10.1016/J.Jallcom.2014.08.246 |
0.379 |
|
| 2015 |
Sun F, Zhang J, Mao S, Jiang Y, Feng Q, Shen Z, Li J, Zhang Z, Han X. Kink structures induced in nickel-based single crystal superalloys by high-Z element migration Journal of Alloys and Compounds. 618: 750-754. DOI: 10.1016/J.Jallcom.2014.08.233 |
0.366 |
|
| 2015 |
Lv X, Sun F, Tong J, Feng Q, Zhang J. Paired Dislocations and Their Interactions with γ′ Particles in Polycrystalline Superalloy GH4037 Journal of Materials Engineering and Performance. 24: 143-148. DOI: 10.1007/S11665-014-1307-Y |
0.346 |
|
| 2014 |
Sun F, Zhang JX, Liu P, Feng Q, Mao SC, Han XD. Retraction notice to “Atomic scale interfacial and compositional characteristics of the σ and γ phases of Ni-based single crystal superalloys” [Acta Materialia 60 (2012) 6631–6640] Acta Materialia. 80: 508. DOI: 10.1016/J.Actamat.2014.04.017 |
0.432 |
|
| 2014 |
Xue F, Zhou HJ, Feng Q. Improved High-Temperature Microstructural Stability and Creep Property of Novel Co-Base Single-Crystal Alloys Containing Ta and Ti Jom. 66: 2486-2494. DOI: 10.1007/S11837-014-1181-Y |
0.528 |
|
| 2014 |
Shi Q, Ding X, Chen J, Zhang X, Zheng Y, Feng Q. Fracture Mode of a Ni-Based Single Crystal Superalloy Containing Topologically Close-Packed Phases at Ambient Temperature Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 45: 1665-1669. DOI: 10.1007/S11661-014-2190-8 |
0.357 |
|
| 2014 |
Shi Q, Ding X, Wang M, Zheng Y, He J, Tin S, Feng Q. Co Effect on As-cast and Heat-Treated Microstructures in Ru-Containing Single-Crystal Superalloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 45: 1833-1843. DOI: 10.1007/S11661-013-2147-3 |
0.734 |
|
| 2013 |
Xue F, Zhou HJ, Ding XF, Wang ML, Feng Q. Improved high temperature γ′ stability of Co–Al–W-base alloys containing Ti and Ta Materials Letters. 112: 215-218. DOI: 10.1016/J.Matlet.2013.09.023 |
0.488 |
|
| 2012 |
Sun F, Zhang J, Liu P, Feng Q, Han X, Mao S. High resolution transmission electron microscopy studies of σ phase in Ni-based single crystal superalloys Journal of Alloys and Compounds. 536: 80-84. DOI: 10.1016/J.Jallcom.2012.05.004 |
0.442 |
|
| 2012 |
Sun F, Zhang JX, Liu P, Feng Q, Mao SC, Han XD. RETRACTED: Atomic scale interfacial and compositional characteristics of the σ and γ phases of Ni-based single-crystal superalloys Acta Materialia. 60: 6631-6640. DOI: 10.1016/J.Actamat.2012.08.032 |
0.422 |
|
| 2012 |
Xue F, Wang M, Feng Q. Alloying Effects on Heat‐Treated Microstructure in Co‐Al‐W‐Base Superalloys at 1300°C and 900°C Superalloys. 813-821. DOI: 10.1002/9781118516430.Ch90 |
0.428 |
|
| 2011 |
Xue F, Wang ML, Feng Q. Phase Equilibria in Co-Rich Co-Al-W Alloys at 1300°C and 900°C Materials Science Forum. 686: 388-391. DOI: 10.4028/Www.Scientific.Net/Msf.686.388 |
0.471 |
|
| 2011 |
Chen JY, Feng Q, Cao LM, Sun ZQ. Improvement of stress–rupture property by Cr addition in Ni-based single crystal superalloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 3791-3798. DOI: 10.1016/J.Msea.2011.01.060 |
0.455 |
|
| 2010 |
Xue F, Li ZQ, Feng Q. Mo Effect on the Microstructure in Co-Al-W-Based Superalloys Materials Science Forum. 420-423. DOI: 10.4028/Www.Scientific.Net/Msf.654-656.420 |
0.466 |
|
| 2010 |
Chen J, Feng Q, Cao L, Sun Z. Influence of Ru addition on microstructure and stress-rupture property of Ni-based single crystal superalloys Progress in Natural Science: Materials International. 20: 61-69. DOI: 10.1016/S1002-0071(12)60008-2 |
0.45 |
|
| 2010 |
Chen JY, Feng Q, Sun ZQ. Topologically close-packed phase promotion in a Ru-containing single crystal superalloy Scripta Materialia. 63: 795-798. DOI: 10.1016/J.Scriptamat.2010.06.019 |
0.481 |
|
| 2008 |
Carroll L, Feng Q, Pollock T. Interfacial Dislocation Networks and Creep in Directional Coarsened Ru-Containing Nickel-Base Single-Crystal Superalloys Metallurgical and Materials Transactions A. 39: 1290-1307. DOI: 10.1007/S11661-008-9520-7 |
0.633 |
|
| 2007 |
Wang WB, Feng Q, Carroll LJ, Wang YL, Chen GL, Pollock TM. Influence of Ru and Cr on the heat-treated microstructure of Ni-based superalloys Materials Science Forum. 1207-1210. DOI: 10.4028/Www.Scientific.Net/Msf.546-549.1207 |
0.477 |
|
| 2007 |
Feng Q, Tryon B, Carroll L, Pollock T. Cyclic oxidation of Ru-containing single crystal superalloys at 1100°C Materials Science and Engineering: A. 458: 184-194. DOI: 10.1016/J.Msea.2006.12.064 |
0.776 |
|
| 2007 |
Carroll L, Feng Q, Mansfield J, Pollock T. Elemental partitioning in Ru-containing nickel-base single crystal superalloys Materials Science and Engineering: A. 457: 292-299. DOI: 10.1016/J.Msea.2006.12.036 |
0.659 |
|
| 2007 |
Yi J, Torbet C, Feng Q, Pollock T, Jones J. Ultrasonic fatigue of a single crystal Ni-base superalloy at 1000°C Materials Science and Engineering: A. 443: 142-149. DOI: 10.1016/J.Msea.2006.08.028 |
0.546 |
|
| 2006 |
Feng Q, Picard Y, McDonald J, Van Rompay P, Yalisove S, Pollock T. Femtosecond laser machining of single-crystal superalloys through thermal barrier coatings Materials Science and Engineering: A. 430: 203-207. DOI: 10.1016/J.Msea.2006.05.104 |
0.5 |
|
| 2006 |
Carroll LJ, Feng Q, Mansfield JF, Pollock TM. High refractory, low misfit ru-containing single-crystal superalloys Metallurgical and Materials Transactions A. 37: 2927-2938. DOI: 10.1007/S11661-006-0174-Z |
0.669 |
|
| 2006 |
Feng Q, Carroll LJ, Pollock TM. Soldification segregation in ruthenium-containing nickel-base superalloys Metallurgical and Materials Transactions A. 37: 1949-1962. DOI: 10.1007/S11661-006-0137-4 |
0.651 |
|
| 2006 |
Tryon B, Feng Q, Wellman RG, Murphy KS, Yang J, Levi CG, Nicholls JR, Pollock TM. Multilayered ruthenium-modified bond coats for thermal barrier coatings Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 3347-3358. DOI: 10.1007/Bf02586169 |
0.755 |
|
| 2005 |
Feng Q, Rowland LJ, Pollock TM. New Phases in a Multicomponent High Ruthenium Single Crystal Superalloy Materials Science Forum. 655-660. DOI: 10.4028/Www.Scientific.Net/Msf.475-479.655 |
0.437 |
|
| 2005 |
Feng Q, Picard Y, Liu H, Yalisove S, Mourou G, Pollock T. Femtosecond laser micromachining of a single-crystal superalloy Scripta Materialia. 53: 511-516. DOI: 10.1016/J.Scriptamat.2005.05.006 |
0.485 |
|
| 2004 |
Feng Q, Nandy TK, Rowland LJ, Tryon B, Banerjee D, Pollock TM. New Phases In Ruthenium-Containing Single-Crystal Superalloys Superalloys. 769-778. DOI: 10.7449/2004/Superalloys_2004_769_778 |
0.776 |
|
| 2004 |
Rowland LJ, Feng Q, Pollock TM. Microstructural Stability and Creep of Ru-Containing Nickel-Base Superalloys Superalloys. 697-706. DOI: 10.7449/2004/Superalloys_2004_697_706 |
0.398 |
|
| 2004 |
Feng Q, Picard YN, Liu H, Yalisove SM, Mourou G, Pollock TM. Femtosecond Laser Micromachining Of Single-Crystal Superalloys Superalloys. 687-696. DOI: 10.7449/2004/Superalloys_2004_687_696 |
0.334 |
|
| 2004 |
Feng Q, Nandy T, Pollock T. Observation of a Ru-rich Heusler phase in a multicomponent Ni-base superalloy Scripta Materialia. 50: 849-854. DOI: 10.1016/J.Scriptamat.2003.12.013 |
0.595 |
|
| 2004 |
Feng Q, Nandy T, Pollock T. The Re (Ru)-rich δ-phase in Ru-containing superalloys Materials Science and Engineering: A. 373: 239-249. DOI: 10.1016/J.Msea.2004.01.014 |
0.593 |
|
| 2004 |
Tryon B, Feng Q, Pollock T. Intermetallic phases formed by ruthenium–nickel alloy interdiffusion Intermetallics. 12: 957-962. DOI: 10.1016/J.Intermet.2004.02.026 |
0.782 |
|
| 2004 |
Feng Q, Nandy T, Tryon B, Pollock T. Deformation of Ru–Al–Ta ternary alloys Intermetallics. 12: 755-762. DOI: 10.1016/J.Intermet.2004.02.016 |
0.797 |
|
| 2003 |
Nandy T, Feng Q, Pollock T. Deformation of a platinum-containing RuAl intermetallic by 〈111〉 dislocations Scripta Materialia. 48: 1087-1092. DOI: 10.1016/S1359-6462(02)00632-2 |
0.596 |
|
| 2003 |
Feng Q, Nandy T, Tin S, Pollock T. Solidification of high-refractory ruthenium-containing superalloys Acta Materialia. 51: 269-284. DOI: 10.1016/S1359-6454(02)00397-X |
0.766 |
|
| 2003 |
Nandy T, Feng Q, Pollock T. Elevated temperature deformation and dynamic strain aging in polycrystalline RuAl alloys Intermetallics. 11: 1029-1038. DOI: 10.1016/S0966-9795(03)00134-1 |
0.523 |
|
| 2002 |
Nandy TK, Feng Q, Banerjee D, Gigliotti MFX, Pollock TM. Mechanical Behavior of Ternary and Quaternary Rual Alloys Mrs Proceedings. 753. DOI: 10.1557/Proc-753-Bb2.11 |
0.608 |
|
| 2002 |
Jiao Z, Whang SH, Yoo MH, Feng Q. Stability of ordinary dislocations on cross-slip planes in γ-TiAl Materials Science and Engineering A. 329: 171-176. DOI: 10.1016/S0921-5093(01)01557-X |
0.31 |
|
| 2000 |
Feng Q, Whang SH. Deformation of Ti-56 at.%Al single crystals oriented for single slip by 1/2<110] ordinary dislocations Acta Materialia. 48: 4307-4321. DOI: 10.1016/S1359-6454(00)00204-4 |
0.397 |
|
| 2000 |
Whang SH, Feng Q, Wang ZM. Deformation characteristics and dislocation structures in single phase gamma titanium aluminides Intermetallics. 8: 531-537. DOI: 10.1016/S0966-9795(99)00160-0 |
0.408 |
|
| 1999 |
Feng Q, Whang SH. Cross-slip and glide behavior of ordinary dislocations in single crystal γ-Ti-56Al Intermetallics. 7: 971-979. DOI: 10.1016/S0966-9795(99)00005-9 |
0.405 |
|
| 1998 |
Whang SH, Feng Q, Gao Y-. Ordering, deformation and microstructure in L10 type FePt Acta Materialia. 46: 6485-6495. DOI: 10.1016/S1359-6454(98)00311-5 |
0.388 |
|
| 1998 |
Wang Z-, Wei C, Feng Q, Whang SH, Allard LF. Dissociated core configurations of [1̄01] superdislocations and their relative stability in single crystal Ti-56Al deformed at 573 K Intermetallics. 6: 131-139. DOI: 10.1016/S0966-9795(97)00056-3 |
0.38 |
|
| 1997 |
Feng Q, Wang ZM, Whang SH. Deformation under single slip of ordinary dislocations in single crystal Ti-56Al Materials Science and Engineering A. 239: 55-62. DOI: 10.1016/S0921-5093(97)00560-1 |
0.374 |
|
| Show low-probability matches. |