| Year |
Citation |
Score |
| 2021 |
Ahmed N, Murray JW, Yuzawa T, Kurokawa T, Nakagawa T, Sarugaku S, Saito D, Clare AT. Residual stress in electrical discharge coatings Surface and Coatings Technology. 416: 127156. DOI: 10.1016/J.SURFCOAT.2021.127156 |
0.384 |
|
| 2021 |
Gargalis L, Ye J, Strantza M, Rubenchik A, Murray JW, Clare AT, Ashcroft IA, Hague R, Matthews MJ. Determining processing behaviour of pure Cu in laser powder bed fusion using direct micro-calorimetry Journal of Materials Processing Technology. 294: 117130. DOI: 10.1016/J.JMATPROTEC.2021.117130 |
0.434 |
|
| 2021 |
Smith PH, Murray JW, Jones DO, Segal J, Clare AT. Magnetically Assisted Directed Energy Deposition Journal of Materials Processing Technology. 288: 116892. DOI: 10.1016/J.Jmatprotec.2020.116892 |
0.485 |
|
| 2021 |
la Monaca A, Murray JW, Liao Z, Speidel A, Robles-Linares JA, Axinte DA, Hardy MC, Clare AT. Surface integrity in metal machining - Part II: Functional performance International Journal of Machine Tools and Manufacture. 164: 103718. DOI: 10.1016/J.IJMACHTOOLS.2021.103718 |
0.402 |
|
| 2021 |
Liao Z, la Monaca A, Murray J, Speidel A, Ushmaev D, Clare A, Axinte D, M'Saoubi R. Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms International Journal of Machine Tools and Manufacture. 162: 103687. DOI: 10.1016/j.ijmachtools.2020.103687 |
0.441 |
|
| 2020 |
Speidel A, Murray J, Bisterov I, Mitchell-Smith J, Parmenter C, Clare A. Thermal activation of electrochemical seed surfaces for selective and tuneable hydrophobic patterning. Acs Applied Materials & Interfaces. PMID 31977174 DOI: 10.1021/Acsami.9B20121 |
0.558 |
|
| 2020 |
Murray JW, Ahmed N, Yuzawa T, Nakagawa T, Sarugaku S, Saito D, Clare AT. Dry-sliding wear and hardness of thick electrical discharge coatings and laser clads Tribology International. 150: 106392. DOI: 10.1016/J.Triboint.2020.106392 |
0.579 |
|
| 2020 |
Al-Hamdani KS, Murray JW, Hussain T, Clare AT. Controlling ceramic-reinforcement distribution in laser cladding of MMCs Surface & Coatings Technology. 381: 125128. DOI: 10.1016/J.Surfcoat.2019.125128 |
0.576 |
|
| 2020 |
Zhang F, Qiu Y, Hu T, Clare AT, Li Y, Zhang L. Microstructures and mechanical behavior of beta-type Ti-25V-15Cr-0.2Si titanium alloy coating by laser cladding Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 796: 140063. DOI: 10.1016/J.Msea.2020.140063 |
0.393 |
|
| 2020 |
Pieris D, Stratoudaki T, Javadi Y, Lukacs P, Catchpole-Smith S, Wilcox PD, Clare A, Clark M. Laser Induced Phased Arrays (LIPA) to detect nested features in additively manufactured components Materials & Design. 187: 108412. DOI: 10.1016/J.Matdes.2019.108412 |
0.356 |
|
| 2020 |
Gorji NE, Saxena P, Corfield MR, Clare A, Rueff J, Bogan J, González PGM, Snelgrove M, Hughes G, O'Connor R, Raghavendra R, Brabazon DC. A new method for assessing the recyclability of powders within Powder Bed Fusion process Materials Characterization. 161: 110167. DOI: 10.1016/J.Matchar.2020.110167 |
0.405 |
|
| 2020 |
Ahmed N, Murray JW, Yuzawa T, Nakagawa T, Sarugaku S, Saito D, Brown PD, Clare AT. Formation of thick electrical discharge coatings Journal of Materials Processing Technology. 285: 116801. DOI: 10.1016/J.Jmatprotec.2020.116801 |
0.555 |
|
| 2020 |
Aboulkhair NT, Zhao G, Hague RJM, Kennedy AR, Ashcroft IA, Clare AT. Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock Journal of Manufacturing Processes. 55: 249-253. DOI: 10.1016/J.Jmapro.2020.04.039 |
0.387 |
|
| 2020 |
Oyelola O, Jackson-Crisp A, Crawforth P, Pieris DM, Smith RJ, M’Saoubi R, Clare AT. Machining of directed energy deposited Ti6Al4V using adaptive control Journal of Manufacturing Processes. 54: 240-250. DOI: 10.1016/J.Jmapro.2020.03.004 |
0.383 |
|
| 2020 |
Walker TR, Bennett CJ, Lee TL, Clare AT. A novel numerical method to predict the transient track geometry and thermomechanical effects through in-situ modification of the process parameters in Direct Energy Deposition Finite Elements in Analysis and Design. 169: 103347. DOI: 10.1016/J.Finel.2019.103347 |
0.353 |
|
| 2020 |
Clare AT, Reynolds WJ, Murray JW, Aboulkhair NT, Simonelli M, Hardy M, Grant DM, Tuck C. Laser calorimetry for assessment of melting behaviour in multi-walled carbon nanotube decorated aluminium by laser powder bed fusion Cirp Annals-Manufacturing Technology. 69: 197-200. DOI: 10.1016/J.Cirp.2020.04.053 |
0.551 |
|
| 2020 |
Sebastian R, Catchpole-Smith S, Simonelli M, Rushworth A, Chen H, Clare A. 'Unit cell' type scan strategies for powder bed fusion: the Hilbert fractal Additive Manufacturing. 101588. DOI: 10.1016/J.Addma.2020.101588 |
0.358 |
|
| 2020 |
Askari M, Hutchins DA, Watson RL, Astolfi L, Nie L, Freear S, Thomas PJ, Laureti S, Ricci M, Clark M, Clare AT. An ultrasonic metallic Fabry-Pérot metamaterial for use in water Additive Manufacturing. 35: 101309. DOI: 10.1016/J.Addma.2020.101309 |
0.322 |
|
| 2020 |
Simonelli M, McCartney DG, Barriobero-Vila P, Aboulkhair NT, Tse YY, Clare A, Hague R. The Influence of Iron in Minimizing the Microstructural Anisotropy of Ti-6Al-4V Produced by Laser Powder-Bed Fusion Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 51: 2444-2459. DOI: 10.1007/S11661-020-05692-6 |
0.38 |
|
| 2019 |
Al-Thamir M, McCartney DG, Simonelli M, Hague R, Clare A. Processability of Atypical WC-Co Composite Feedstock by Laser Powder-Bed Fusion. Materials (Basel, Switzerland). 13. PMID 31861848 DOI: 10.3390/Ma13010050 |
0.438 |
|
| 2019 |
Walker JC, Cinti S, Kamps TJ, Mitchell-Smith J, Clare AT. Influence of contact area on the sliding friction and wear behaviour of an electrochemical jet textured Al-Si alloy Wear. 1336-1344. DOI: 10.1016/J.Wear.2019.01.008 |
0.381 |
|
| 2019 |
Al-Hamdani KS, Murray JW, Hussain T, Clare AT. Heat-treatment and mechanical properties of cold-sprayed high strength Al alloys from satellited feedstocks Surface & Coatings Technology. 374: 21-31. DOI: 10.1016/J.Surfcoat.2019.05.043 |
0.53 |
|
| 2019 |
Wits WW, Smit Md, Al-Hamdani K, Clare AT. Laser powder bed fusion of a Magnesium-SiC metal matrix composite Procedia Cirp. 81: 506-511. DOI: 10.1016/J.Procir.2019.03.137 |
0.376 |
|
| 2019 |
Gasper AND, Hickman D, Ashcroft I, Sharma S, Wang X, Szost B, Johns D, Clare AT. Oxide and spatter powder formation during laser powder bed fusion of Hastelloy X Powder Technology. 354: 333-337. DOI: 10.1016/J.Powtec.2019.06.004 |
0.392 |
|
| 2019 |
Murray JW, Simonelli M, Speidel A, Grant DM, Clare AT. Spheroidisation of metal powder by pulsed electron beam irradiation Powder Technology. 350: 100-106. DOI: 10.1016/J.Powtec.2019.03.041 |
0.535 |
|
| 2019 |
Mitchell-Smith J, Bisterov I, Speidel A, Ashcroft I, Clare AT. Direct-writing by active tooling in electrochemical jet processing Manufacturing Letters. 19: 15-20. DOI: 10.1016/J.Mfglet.2019.01.001 |
0.333 |
|
| 2019 |
Tan H, Guo M, Clare AT, Lin X, Chen J, Huang W. Microstructure and properties of Ti-6Al-4V fabricated by low-power pulsed laser directed energy deposition Journal of Materials Science & Technology. 35: 2027-2037. DOI: 10.1016/J.Jmst.2019.05.008 |
0.382 |
|
| 2019 |
Speidel A, Mitchell-Smith J, Bisterov I, Clare AT. Oscillatory behaviour in the electrochemical jet processing of titanium Journal of Materials Processing Technology. 273: 116264. DOI: 10.1016/J.Jmatprotec.2019.116264 |
0.417 |
|
| 2019 |
Farayibi PK, Abioye TE, Kennedy A, Clare AT. Development of metal matrix composites by direct energy deposition of ‘satellited’ powders Journal of Manufacturing Processes. 45: 429-437. DOI: 10.1016/J.Jmapro.2019.07.029 |
0.406 |
|
| 2019 |
Walker TR, Bennett CJ, Lee TL, Clare AT. A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718 International Journal of Mechanical Sciences. 151: 609-621. DOI: 10.1016/J.Ijmecsci.2018.12.004 |
0.34 |
|
| 2019 |
Clare AT, Speidel A, Mitchell-Smith J, Bisterov I, Murray JW. Surface enhanced micro features using electrochemical jet processing Cirp Annals-Manufacturing Technology. 68: 177-180. DOI: 10.1016/J.Cirp.2019.04.114 |
0.54 |
|
| 2019 |
Catchpole-Smith S, Sélo RRJ, Davis AW, Ashcroft IA, Tuck CJ, Clare A. Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion Additive Manufacturing. 30: 100846. DOI: 10.1016/J.Addma.2019.100846 |
0.34 |
|
| 2019 |
Dryburgh P, Pieris D, Martina F, Patel R, Sharples S, Li W, Clare AT, Williams SW, Smith RJ. Spatially resolved acoustic spectroscopy for integrity assessment in wire-arc additive manufacturing Additive Manufacturing. 28: 236-251. DOI: 10.1016/J.Addma.2019.04.015 |
0.348 |
|
| 2018 |
Goriainov V, Cook RB, Murray JW, Walker JC, Dunlop DG, Clare AT, Oreffo ROC. Human Skeletal Stem Cell Response to Multiscale Topography Induced by Large Area Electron Beam Irradiation Surface Treatment. Frontiers in Bioengineering and Biotechnology. 6: 91. PMID 30087890 DOI: 10.3389/Fbioe.2018.00091 |
0.479 |
|
| 2018 |
Patel R, Hirsch M, Dryburgh P, Pieris D, Achamfuo-Yeboah S, Smith RJ, Light RA, Sharples SD, Clare AT, Clark M. Imaging material texture of as-deposited selective laser melted parts using spatially resolved acoustic spectroscopy Applied Sciences. 8: 1991. DOI: 10.3390/App8101991 |
0.446 |
|
| 2018 |
Algodi SJ, Murray JW, Brown PD, Clare AT. Wear performance of TiC/Fe cermet electrical discharge coatings Wear. 109-123. DOI: 10.1016/J.Wear.2018.02.007 |
0.557 |
|
| 2018 |
Speidel A, Mitchell-Smith J, Bisterov I, Clare AT. The Dependence of Surface Finish on Material Precondition in Electrochemical Jet Machining Procedia Cirp. 68: 477-482. DOI: 10.1016/J.Procir.2017.12.144 |
0.42 |
|
| 2018 |
Bisterov I, Mitchell-Smith J, Speidel A, Clare A. Specific and Programmable Surface Structuring by Electrochemical Jet Processing Procedia Cirp. 68: 460-465. DOI: 10.1016/J.Procir.2017.12.128 |
0.382 |
|
| 2018 |
Mitchell-Smith J, Speidel A, Bisterov I, Clare AT. Electrolyte multiplexing in electrochemical jet processing Procedia Cirp. 68: 483-487. DOI: 10.1016/J.Procir.2017.12.088 |
0.407 |
|
| 2018 |
Algodi SJ, Murray JW, Clare AT, Brown PD. Modelling and Characterisation of Electrical Discharge TiC-Fe Cermet Coatings Procedia Cirp. 68: 28-33. DOI: 10.1016/J.Procir.2017.12.017 |
0.557 |
|
| 2018 |
Tan H, Hao D, Al-Hamdani K, Zhang F, Xu Z, Clare AT. Direct metal deposition of TiB 2 /AlSi10Mg composites using satellited powders Materials Letters. 214: 123-126. DOI: 10.1016/J.Matlet.2017.11.121 |
0.395 |
|
| 2018 |
Zhang F, Mei M, Al-Hamdani K, Tan H, Clare AT. Novel nucleation mechanisms through satelliting in direct metal deposition of Ti-15Mo Materials Letters. 213: 197-200. DOI: 10.1016/J.Matlet.2017.11.036 |
0.395 |
|
| 2018 |
Murray JW, Cook RB, Senin N, Algodi SJ, Clare AT. Defect-free TiC/Si multi-layer electrical discharge coatings Materials & Design. 155: 352-365. DOI: 10.1016/J.Matdes.2018.06.019 |
0.55 |
|
| 2018 |
Zhao G, Ashcroft IA, Hague RJM, Kennedy AR, Clare AT. Salt-metal feedstocks for the creation of stochastic cellular structures with controlled relative density by powder bed fabrication Materials & Design. 149: 63-72. DOI: 10.1016/J.Matdes.2018.03.071 |
0.361 |
|
| 2018 |
Simonelli M, Aboulkhair NT, Cohen P, Murray JW, Clare AT, Tuck C, Hague RJM. A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks Materials Characterization. 143: 118-126. DOI: 10.1016/J.Matchar.2018.05.039 |
0.563 |
|
| 2018 |
Speidel A, Mitchell-Smith J, Bisterov I, Clare AT. The importance of microstructure in electrochemical jet processing Journal of Materials Processing Technology. 262: 459-470. DOI: 10.1016/J.Jmatprotec.2018.07.022 |
0.405 |
|
| 2018 |
Xu Z, Hyde CJ, Tuck C, Clare AT. Creep behaviour of inconel 718 processed by laser powder bed fusion Journal of Materials Processing Technology. 256: 13-24. DOI: 10.1016/J.Jmatprotec.2018.01.040 |
0.433 |
|
| 2018 |
Mitchell-Smith J, Speidel A, Clare AT. Advancing electrochemical jet methods through manipulation of the angle of address Journal of Materials Processing Technology. 255: 364-372. DOI: 10.1016/J.Jmatprotec.2017.12.026 |
0.366 |
|
| 2018 |
Tan H, Shang W, Zhang F, Clare AT, Lin X, Chen J, Huang W. Process mechanisms based on powder flow spatial distribution in direct metal deposition Journal of Materials Processing Technology. 254: 361-372. DOI: 10.1016/J.Jmatprotec.2017.11.026 |
0.345 |
|
| 2018 |
Algodi SJ, Clare AT, Brown PD. Modelling of single spark interactions during electrical discharge coating Journal of Materials Processing Technology. 252: 760-772. DOI: 10.1016/J.Jmatprotec.2017.10.029 |
0.403 |
|
| 2018 |
Mitchell-Smith J, Speidel A, Clare AT. Transitory electrochemical masking for precision jet processing techniques Journal of Manufacturing Processes. 31: 273-285. DOI: 10.1016/J.Jmapro.2017.11.028 |
0.368 |
|
| 2018 |
Xu Z, Dunleavey J, Antar M, Hood R, Soo SL, Kucukturk G, Hyde CJ, Clare AT. The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes International Journal of Fatigue. 111: 196-207. DOI: 10.1016/J.Ijfatigue.2018.02.022 |
0.406 |
|
| 2018 |
Clare AT, Speidel A, Bisterov I, Jackson-Crisp A, Mitchell-Smith J. Precision enhanced electrochemical jet processing Cirp Annals-Manufacturing Technology. 67: 205-208. DOI: 10.1016/J.Cirp.2018.04.086 |
0.378 |
|
| 2018 |
Xu Z, Murray JW, Hyde CJ, Clare AT. Effect of post processing on the creep performance of laser powder bed fused Inconel 718 Additive Manufacturing. 24: 486-497. DOI: 10.1016/J.Addma.2018.10.027 |
0.511 |
|
| 2018 |
Gasper AND, Szost B, Wang X, Johns D, Sharma S, Clare AT, Ashcroft IA. Spatter and oxide formation in laser powder bed fusion of Inconel 718 Additive Manufacturing. 24: 446-456. DOI: 10.1016/J.Addma.2018.09.032 |
0.405 |
|
| 2018 |
Oyelola O, Crawforth P, M’Saoubi R, Clare AT. Machining of functionally graded Ti6Al4V/ WC produced by directed energy deposition Additive Manufacturing. 24: 20-29. DOI: 10.1016/J.Addma.2018.09.007 |
0.439 |
|
| 2018 |
Hirsch M, Dryburgh P, Catchpole-Smith S, Patel R, Parry LA, Sharples SD, Ashcroft IA, Clare AT. Targeted rework strategies for powder bed additive manufacture Additive Manufacturing. 19: 127-133. DOI: 10.1016/J.Addma.2017.11.011 |
0.362 |
|
| 2018 |
Oyelola O, Crawforth P, M’Saoubi R, Clare AT. On the machinability of directed energy deposited Ti6Al4V Additive Manufacturing. 19: 39-50. DOI: 10.1016/J.Addma.2017.11.005 |
0.364 |
|
| 2018 |
Speidel A, Su R, Mitchell-Smith J, Dryburgh P, Bisterov I, Pieris D, Li W, Patel R, Clark M, Clare AT. Crystallographic texture can be rapidly determined by electrochemical surface analytics Acta Materialia. 159: 89-101. DOI: 10.1016/J.Actamat.2018.07.059 |
0.405 |
|
| 2017 |
Hirsch M, Catchpole-Smith S, Patel R, Marrow P, Li W, Tuck C, Sharples SD, Clare AT. Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy. Proceedings. Mathematical, Physical, and Engineering Sciences. 473: 20170194. PMID 28989306 DOI: 10.1098/Rspa.2017.0194 |
0.419 |
|
| 2017 |
Abioye TE, Farayibi PK, Clare AT. A comparative study of Inconel 625 laser cladding by wire and powder feedstock Materials and Manufacturing Processes. 32: 1653-1659. DOI: 10.1080/10426914.2017.1317787 |
0.464 |
|
| 2017 |
Walker J, Kamps T, Lam J, Mitchell-Smith J, Clare A. Tribological behaviour of an electrochemical jet machined textured Al-Si automotive cylinder liner material Wear. 376: 1611-1621. DOI: 10.1016/J.Wear.2017.01.085 |
0.399 |
|
| 2017 |
Al-Hamdani KS, Murray JW, Hussain T, Kennedy A, Clare AT. Cold sprayed metal-ceramic coatings using satellited powders Materials Letters. 198: 184-187. DOI: 10.1016/J.Matlet.2017.03.175 |
0.514 |
|
| 2017 |
Xu Z, Hyde CJ, Thompson A, Leach RK, Maskery I, Tuck C, Clare AT. Staged thermomechanical testing of nickel superalloys produced by selective laser melting Materials & Design. 133: 520-527. DOI: 10.1016/J.Matdes.2017.08.009 |
0.346 |
|
| 2017 |
Sumner A, Gerada C, Brown N, Clare A. Controlling DC permeability in cast steels Journal of Magnetism and Magnetic Materials. 429: 79-85. DOI: 10.1016/J.Jmmm.2016.12.137 |
0.34 |
|
| 2017 |
Murray JW, Algodi SJ, Fay MW, Brown PD, Clare AT. Formation mechanism of electrical discharge TiC-Fe composite coatings Journal of Materials Processing Technology. 243: 143-151. DOI: 10.1016/J.Jmatprotec.2016.12.011 |
0.53 |
|
| 2017 |
Gasper AND, Catchpole-Smith S, Clare AT. In-situ synthesis of titanium aluminides by direct metal deposition Journal of Materials Processing Technology. 239: 230-239. DOI: 10.1016/J.Jmatprotec.2016.08.031 |
0.421 |
|
| 2017 |
Zhang F, Yang M, Clare AT, Lin X, Tan H, Chen Y. Microstructure and mechanical properties of Ti-2Al alloyed with Mo formed in laser additive manufacture Journal of Alloys and Compounds. 727: 821-831. DOI: 10.1016/J.Jallcom.2017.07.324 |
0.351 |
|
| 2017 |
Mitchell-Smith J, Speidel A, Gaskell J, Clare AT. Energy distribution modulation by mechanical design for electrochemical jet processing techniques International Journal of Machine Tools & Manufacture. 122: 32-46. DOI: 10.1016/J.Ijmachtools.2017.05.005 |
0.405 |
|
| 2017 |
Bourell D, Kruth JP, Leu M, Levy G, Rosen D, Beese AM, Clare A. Materials for additive manufacturing Cirp Annals. 66: 659-681. DOI: 10.1016/J.Cirp.2017.05.009 |
0.345 |
|
| 2017 |
Clare AT, Speidel A, Mitchell-smith J, Patwardhan S. Electrolyte design for suspended particulates in electrolyte jet processing Cirp Annals. 66: 201-204. DOI: 10.1016/J.Cirp.2017.04.133 |
0.415 |
|
| 2017 |
Catchpole-Smith S, Aboulkhair N, Parry L, Tuck C, Ashcroft IA, Clare A. Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys Additive Manufacturing. 15: 113-122. DOI: 10.1016/J.Addma.2017.02.002 |
0.378 |
|
| 2017 |
Hirsch M, Patel R, Li W, Guan G, Leach RK, Sharples SD, Clare AT. Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture Additive Manufacturing. 13: 135-142. DOI: 10.1016/J.Addma.2016.10.004 |
0.373 |
|
| 2016 |
Guan G, Hirsch M, Syam WP, Leach RK, Huang Z, Clare AT. Loose powder detection and surface characterization in selective laser sintering via optical coherence tomography. Proceedings. Mathematical, Physical, and Engineering Sciences / the Royal Society. 472: 20160201. PMID 27493569 DOI: 10.1098/Rspa.2016.0201 |
0.401 |
|
| 2016 |
Guan G, Lu ZH, Hirsch M, Goodridge R, Childs DTD, Matcher SJ, Clare AT, Groom KM. Towards in-situ process monitoring in selective laser sintering using optical coherence tomography Proceedings of Spie - the International Society For Optical Engineering. 9738. DOI: 10.1117/12.2210992 |
0.416 |
|
| 2016 |
Speidel A, Lutey AHA, Mitchell-Smith J, Rance GA, Liverani E, Ascari A, Fortunato A, Clare AT. Surface modification of mild steel using a combination of laser and electrochemical processes Surface & Coatings Technology. 307: 849-860. DOI: 10.1016/J.Surfcoat.2016.09.077 |
0.467 |
|
| 2016 |
Algodi SJ, Murray JW, Fay MW, Clare AT, Brown PD. Electrical discharge coating of nanostructured TiC-Fe cermets on 304 stainless steel Surface & Coatings Technology. 307: 639-649. DOI: 10.1016/J.Surfcoat.2016.09.062 |
0.53 |
|
| 2016 |
Murray JW, Clare AT. Morphology and Wear Behaviour of Single and Multi-layer Electrical Discharge Coatings Procedia Cirp. 42: 236-239. DOI: 10.1016/J.Procir.2016.02.278 |
0.571 |
|
| 2016 |
Mitchell-Smith J, Clare AT. ElectroChemical Jet Machining of Titanium: Overcoming Passivation Layers with Ultrasonic Assistance Procedia Cirp. 42: 379-383. DOI: 10.1016/J.Procir.2016.02.215 |
0.41 |
|
| 2016 |
Speidel A, Mitchell-Smith J, Walsh DA, Hirsch M, Clare A. Electrolyte Jet Machining of Titanium Alloys Using Novel Electrolyte Solutions Procedia Cirp. 42: 367-372. DOI: 10.1016/J.Procir.2016.02.200 |
0.373 |
|
| 2016 |
Oyelola O, Crawforth P, M'Saoubi R, Clare AT. Machining of additively manufactured parts: implications for surface integrity Procedia Cirp. 45: 119-122. DOI: 10.1016/J.Procir.2016.02.066 |
0.419 |
|
| 2016 |
Everton SK, Hirsch M, Stravroulakis P, Leach RK, Clare AT. Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing Materials and Design. 95: 431-445. DOI: 10.1016/J.Matdes.2016.01.099 |
0.363 |
|
| 2016 |
Maskery I, Aboulkhair NT, Corfield MR, Tuck C, Clare AT, Leach RK, Wildman RD, Ashcroft I, Hague RJM. Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography Materials Characterization. 111: 193-204. DOI: 10.1016/J.Matchar.2015.12.001 |
0.315 |
|
| 2016 |
Smith RJ, Hirsch M, Patel R, Li W, Clare AT, Sharples SD. Spatially resolved acoustic spectroscopy for selective laser melting Journal of Materials Processing Technology. 236: 93-102. DOI: 10.1016/J.Jmatprotec.2016.05.005 |
0.421 |
|
| 2016 |
Abioye TE, Farayibi PK, McCartney DG, Clare AT. Effect of carbide dissolution on the corrosion performance of tungsten carbide reinforced Inconel 625 wire laser coating Journal of Materials Processing Technology. 231: 89-99. DOI: 10.1016/J.Jmatprotec.2015.12.023 |
0.44 |
|
| 2016 |
Farayibi PK, Abioye TE, Murray JW, Kinnell PK, Clare AT. Corrigendum to “Surface improvement of laser clad Ti–6Al–4V using plain waterjet and pulsed electron beam irradiation [J. Mater. Process. Technol. 218C 2015 1–11]” Journal of Materials Processing Technology. 229: 713. DOI: 10.1016/J.Jmatprotec.2015.10.008 |
0.493 |
|
| 2016 |
Abioye TE, McCartney DG, Clare AT. Corrigendum to “Laser cladding of Inconel 625 wire for corrosion protection [J. Mater. Process. Technol. 217C 2015 232–240]” Journal of Materials Processing Technology. 229: 622. DOI: 10.1016/J.Jmatprotec.2015.10.007 |
0.304 |
|
| 2016 |
Murray JW, Sun J, Patil DV, Wood TA, Clare AT. Physical and electrical characteristics of EDM debris Journal of Materials Processing Technology. 229: 54-60. DOI: 10.1016/J.Jmatprotec.2015.09.019 |
0.475 |
|
| 2016 |
Farayibi PK, Abioye TE, Clare AT. A parametric study on laser cladding of Ti-6Al-4V wire and WC/W2C powder The International Journal of Advanced Manufacturing Technology. 87: 3349-3358. DOI: 10.1007/S00170-016-8743-9 |
0.41 |
|
| 2015 |
Algodi SJ, Murray JW, Clare AT, Brown PD. Characterisation of TiC layers deposited using an electrical discharge coating process Journal of Physics: Conference Series. 644. DOI: 10.1088/1742-6596/644/1/012008 |
0.447 |
|
| 2015 |
Guan G, Hirsch M, Lu ZH, Childs DTD, Matcher SJ, Goodridge R, Groom KM, Clare AT. Evaluation of selective laser sintering processes by optical coherence tomography Materials and Design. 88: 837-846. DOI: 10.1016/J.Matdes.2015.09.084 |
0.415 |
|
| 2015 |
Allwood JM, Childs THC, Clare AT, De Silva AKM, Dhokia V, Hutchings IM, Leach RK, Leal-Ayala DR, Lowth S, Majewski CE, Marzano A, Mehnen J, Nassehi A, Ozturk E, Raffles MH, et al. Manufacturing at double the speed Journal of Materials Processing Technology. 229: 729-757. DOI: 10.1016/J.Jmatprotec.2015.10.028 |
0.314 |
|
| 2015 |
Farayibi PK, Abioye TE, Murray JW, Kinnell P, Clare AT. Surface improvement of laser clad Ti-6Al-4V using plain waterjet and pulsed electron beam irradiation Journal of Materials Processing Technology. 218: 1-11. DOI: 10.1016/J.Jmatprotec.2014.11.035 |
0.566 |
|
| 2015 |
Abioye TE, McCartney DG, Clare AT. Laser cladding of Inconel 625 wire for corrosion protection Journal of Materials Processing Technology. 217: 232-240. DOI: 10.1016/J.Jmatprotec.2014.10.024 |
0.425 |
|
| 2015 |
Abioye TE, Farayibi PK, Kinnel P, Clare AT. Functionally graded Ni-Ti microstructures synthesised in process by direct laser metal deposition The International Journal of Advanced Manufacturing Technology. 79: 843-850. DOI: 10.1007/S00170-015-6878-8 |
0.397 |
|
| 2014 |
Boud F, Murray JW, Loo LF, Clare AT, Kinnell PK. Soluble abrasives for waterjet machining Materials and Manufacturing Processes. 29: 1346-1352. DOI: 10.1080/10426914.2014.930949 |
0.54 |
|
| 2014 |
Murray JW, Walker JC, Clare AT. Nanostructures in austenitic steel after EDM and pulsed electron beam irradiation Surface and Coatings Technology. 259: 465-472. DOI: 10.1016/J.Surfcoat.2014.10.045 |
0.571 |
|
| 2014 |
Kawanaka T, Kato S, Kunieda M, Murray JW, Clare AT. Selective surface texturing using electrolyte jet machining Procedia Cirp. 13: 345-349. DOI: 10.1016/J.Procir.2014.04.058 |
0.533 |
|
| 2014 |
Farayibi PK, Murray JW, Huang L, Boud F, Kinnell P, Clare AT. Erosion resistance of laser clad Ti-6Al-4V/WC composite for waterjet tooling Journal of Materials Processing Technology. 214: 710-721. DOI: 10.1016/J.Jmatprotec.2013.08.014 |
0.553 |
|
| 2014 |
Presti DL, Fecarotti C, Clare AT, Airey G. Toward more realistic viscosity measurements of tyre rubber–bitumen blends Construction and Building Materials. 67: 270-278. DOI: 10.1016/J.Conbuildmat.2014.03.038 |
0.308 |
|
| 2014 |
Li CL, Murray JW, Voisey KT, Clare AT, McCartney DG. Corrosion behaviour of a rapidly solidified Al 87.4 Co 7.9 Ce 4.7 layer prepared by large area electron beam irradiation Applied Surface Science. 320: 581-590. DOI: 10.1016/J.Apsusc.2014.09.067 |
0.55 |
|
| 2014 |
Walker JC, Murray JW, Nie M, Cook RB, Clare AT. The effect of large-area pulsed electron beam melting on the corrosion and microstructure of a Ti6Al4V alloy Applied Surface Science. 311: 534-540. DOI: 10.1016/J.Apsusc.2014.05.105 |
0.573 |
|
| 2014 |
Li CL, Murray JW, Voisey KT, Clare AT, McCartney DG. Effect of prior laser microstructural refinement on the formation of amorphous layer in an Al86Co7.6Ce6.4 alloy Applied Surface Science. 289: 230-236. DOI: 10.1016/J.Apsusc.2013.10.140 |
0.547 |
|
| 2014 |
Okada A, Okamoto Y, Clare A, Uno Y. Fundamental study on releasability of molded rubber from mold tool surface The International Journal of Advanced Manufacturing Technology. 70: 1515-1521. DOI: 10.1007/S00170-013-5415-X |
0.358 |
|
| 2013 |
Clare AT, Oyelola O, Abioye TE, Farayibi PK. Laser cladding of rail steel with Co–Cr Surface Engineering. 29: 731-736. DOI: 10.1179/1743294412Y.0000000075 |
0.384 |
|
| 2013 |
Abioye TE, Folkes J, Clare AT, McCartney DG. Concurrent Inconel 625 wire and WC powder laser cladding: process stability and microstructural characterisation Surface Engineering. 29: 647-653. DOI: 10.1179/1743294412Y.0000000073 |
0.42 |
|
| 2013 |
Farayibi PK, Folkes JA, Clare AT. Laser Deposition of Ti-6Al-4V Wire with WC Powder for Functionally Graded Components Materials and Manufacturing Processes. 28: 514-518. DOI: 10.1080/10426914.2012.718477 |
0.443 |
|
| 2013 |
Walker JC, Cook RB, Murray JW, Clare AT. Pulsed electron beam surface melting of CoCrMo alloy for biomedical applications Wear. 301: 250-256. DOI: 10.1016/J.Wear.2013.02.002 |
0.56 |
|
| 2013 |
Murray JW, Kinnell PK, Cannon AH, Bailey B, Clare AT. Surface finishing of intricate metal mould structures by large-area electron beam irradiation Precision Engineering. 37: 443-450. DOI: 10.1016/J.Precisioneng.2012.11.007 |
0.56 |
|
| 2013 |
Abioye TE, Folkes J, Clare AT. A parametric study of Inconel 625 wire laser deposition Journal of Materials Processing Technology. 213: 2145-2151. DOI: 10.1016/J.Jmatprotec.2013.06.007 |
0.422 |
|
| 2013 |
Murray JW, Fay MW, Kunieda M, Clare AT. TEM study on the electrical discharge machined surface of single-crystal silicon Journal of Materials Processing Technology. 213: 801-809. DOI: 10.1016/J.Jmatprotec.2012.11.028 |
0.586 |
|
| 2013 |
Li CL, Murray JW, Voisey KT, Clare AT, McCartney DG. Amorphous layer formation in Al86.0Co7.6Ce6.4 glass-forming alloy by large-area electron beam irradiation Applied Surface Science. 280: 431-438. DOI: 10.1016/J.Apsusc.2013.05.005 |
0.554 |
|
| 2012 |
Clare A, Oyelola O, Folkes J, Farayibi P. Laser cladding for railway repair and preventative maintenance Journal of Laser Applications. 24: 32004. DOI: 10.2351/1.4710578 |
0.363 |
|
| 2012 |
Murray JW, Clare AT. Repair of EDM induced surface cracks by pulsed electron beam irradiation Journal of Materials Processing Technology. 212: 2642-2651. DOI: 10.1016/J.Jmatprotec.2012.07.018 |
0.565 |
|
| 2012 |
Murray J, Zdebski D, Clare AT. Workpiece debris deposition on tool electrodes and secondary discharge phenomena in micro-EDM Journal of Materials Processing Technology. 212: 1537-1547. DOI: 10.1016/J.Jmatprotec.2012.02.019 |
0.531 |
|
| 2012 |
Walker JC, Murray J, Narania S, Clare AT. Dry sliding friction and wear behaviour of an electron beam melted hypereutectic Al-Si alloy Tribology Letters. 45: 49-58. DOI: 10.1007/S11249-011-9865-8 |
0.56 |
|
| 2011 |
Farayibi PK, Folkes J, Clare A, Oyelola O. Cladding of pre-blended Ti–6Al–4V and WC powder for wear resistant applications Surface & Coatings Technology. 206: 372-377. DOI: 10.1016/J.Surfcoat.2011.07.033 |
0.437 |
|
| 2010 |
Clare AT, Gao L, Brkić B, Chalker PR, Taylor S. Linear ion trap fabricated using rapid manufacturing technology. Journal of the American Society For Mass Spectrometry. 21: 317-22. PMID 19962322 DOI: 10.1016/J.Jasms.2009.10.020 |
0.653 |
|
| 2009 |
Brkić B, France N, Clare AT, Sutcliffe CJ, Chalker PR, Taylor S. Development of quadrupole mass spectrometers using rapid prototyping technology. Journal of the American Society For Mass Spectrometry. 20: 1359-65. PMID 19409811 DOI: 10.1016/J.Jasms.2009.03.025 |
0.648 |
|
| 2009 |
Chalker PR, Berggreen KM, Clare AT, Singh J, Sutcliffe CJ. Rapid Prototyping Methodologies for Ceramic Micro Components Solid State Phenomena. 154: 1-7. DOI: 10.4028/Www.Scientific.Net/Ssp.154.1 |
0.364 |
|
| 2008 |
Clare AT, Chalker PR, Davies S, Sutcliffe CJ, Tsopanos S. Selective laser melting of high aspect ratio 3D nickel–titanium structures two way trained for MEMS applications International Journal of Mechanics and Materials in Design. 4: 181-187. DOI: 10.1007/S10999-007-9032-4 |
0.4 |
|
| 2008 |
Clare AT, Chalker PR, Davies S, Sutcliffe CJ, Tsopanos S. Selective laser sintering of barium titanate-polymer composite films Journal of Materials Science. 43: 3197-3202. DOI: 10.1007/S10853-007-2396-X |
0.398 |
|
| 2005 |
Chalker P, Clare A, Davies S, Sutcliffe CJ, Tsopanos S. Selective laser melting of high aspect ratio 3D nickel – titanium structures for MEMS applications Mrs Proceedings. 890. DOI: 10.1557/Proc-0890-Y03-02 |
0.691 |
|
| Show low-probability matches. |