Year |
Citation |
Score |
2020 |
Cheng Q, Jiang H, Li Y. Effect of fiber content and orientation on the scratch behavior of short glass fiber reinforced PBT composites Tribology International. 146: 106221. DOI: 10.1016/J.Triboint.2020.106221 |
0.325 |
|
2020 |
Yang Z, Zhang J, Zhu Z, Jiang C, Cheng Q, Jiang H. Mechanism of temperature rise due to crazing evolution during PMMA scratch International Journal of Solids and Structures. 199: 120-130. DOI: 10.1016/J.Ijsolstr.2020.04.031 |
0.345 |
|
2020 |
Jiang C, Zhu Z, Zhang J, Yang Z, Jiang H. Constitutive modeling of the rate- and temperature-dependent macro-yield behavior of amorphous glassy polymers International Journal of Mechanical Sciences. 179: 105653. DOI: 10.1016/J.Ijmecsci.2020.105653 |
0.391 |
|
2019 |
Chen K, Kang G, Yu C, Jiang H. Effect of crystalline content on ratchetting of ultra-high molecular weight polyethylene polymers: Experimental investigation and constitutive model Mechanics of Materials. 133: 37-54. DOI: 10.1016/J.Mechmat.2019.03.007 |
0.403 |
|
2019 |
Liu G, Zhang R, Yi Y, Sun L, Shi L, Jiang H, Ma S. Experimental and simulation study on stress concentration of graphite components in tension Mechanics of Materials. 130: 88-94. DOI: 10.1016/J.Mechmat.2019.01.010 |
0.381 |
|
2019 |
Rao W, Kang G, Zhang J, Xie X, Jiang H. Numerical study on toughening mechanism of bulk metallic glass composites from martensite transformation of toughening phase Journal of Non-Crystalline Solids. 506: 88-97. DOI: 10.1016/J.Jnoncrysol.2018.12.001 |
0.321 |
|
2019 |
Rao W, Zhang J, Kang G, Yu C, Jiang H. A meso-mechanical constitutive model of bulk metallic glass composites considering the local failure of matrix International Journal of Plasticity. 115: 238-267. DOI: 10.1016/J.Ijplas.2018.11.017 |
0.302 |
|
2019 |
Jiang H, Jiang C. Finite deformation constitutive model for macro-yield behavior of amorphous glassy polymers with a molecular entanglement-based internal-state variable International Journal of Mechanical Sciences. 105064. DOI: 10.1016/J.Ijmecsci.2019.105064 |
0.381 |
|
2019 |
Zhu Z, Xia Y, Li J, Jiang C, Jiang H. Rate dependent shear debonding between a highly stretchable elastomer and a rigid substrate: Delayed debonding and pre-stretch effect Engineering Fracture Mechanics. 222: 106743. DOI: 10.1016/J.Engfracmech.2019.106743 |
0.356 |
|
2019 |
Jiang C, Jiang H, Zhang J, Kang G. Analytical model of friction behavior during polymer scratching with conical tip Friction. 7: 466-478. DOI: 10.1007/S40544-018-0225-7 |
0.405 |
|
2019 |
Zhu Z, Jiang C, Jiang H. A visco-hyperelastic model of brain tissue incorporating both tension/compression asymmetry and volume compressibility Acta Mechanica. 230: 2125-2135. DOI: 10.1007/S00707-019-02383-1 |
0.31 |
|
2018 |
Song H, Ke L, Wang Y, Yang J, Jiang H. Two-Dimensional Frictionless Contact of a Coated Half-Plane Based on Couple Stress Theory International Journal of Applied Mechanics. 10: 1850049. DOI: 10.1142/S1758825118500497 |
0.341 |
|
2018 |
Liu J, Jiang H, Cheng Q, Wang C. Investigation of nano-scale scratch and stick-slip behaviors of polycarbonate using atomic force microscopy Tribology International. 125: 59-65. DOI: 10.1016/J.Triboint.2018.04.024 |
0.37 |
|
2018 |
Jiang H, Wei Y, Cheng Q, Zhu Z. Scratch behavior of low density polyethylene film: Effects of pre-stretch and aging Materials & Design. 157: 235-243. DOI: 10.1016/J.Matdes.2018.07.052 |
0.332 |
|
2018 |
Zhang X, Yi Y, Zhu H, Liu G, Sun L, Shi L, Jiang H, Ma S. Measurement of tensile strength of nuclear graphite based on ring compression test Journal of Nuclear Materials. 511: 134-140. DOI: 10.1016/J.Jnucmat.2018.09.010 |
0.352 |
|
2018 |
Liu G, Wang L, Yi Y, Sun L, Shi L, Jiang H, Ma S. Inverse identification of tensile and compressive damage properties of graphite material based on a single four-point bending test Journal of Nuclear Materials. 509: 445-453. DOI: 10.1016/J.Jnucmat.2018.07.022 |
0.382 |
|
2018 |
Zhang J, Jiang H, Jiang C, Kang G, Kan Q, Li Y. Experimental and numerical investigations of evaluation criteria and material parameters' coupling effect on polypropylene scratch Polymer Engineering and Science. 58: 118-122. DOI: 10.1002/Pen.24538 |
0.418 |
|
2017 |
Zhu Z, Xia Y, Niu G, Liu J, Wang C, Jiang H. Effect of direct fluorination on the mechanical and scratch performance of nitrile butadiene rubber Wear. 1314-1320. DOI: 10.1016/J.Wear.2016.12.013 |
0.336 |
|
2017 |
Chen K, Kang G, Lu F, Chen J, Jiang H. Corrigendum to “Effect of relative humidity on uniaxial cyclic softening/hardening and intrinsic heat generation of polyamide-6 polymer” [Polymer Testing 56 (2016) 19–28] Polymer Testing. DOI: 10.1016/J.Polymertesting.2017.10.004 |
0.359 |
|
2017 |
Chen K, Kang G, Yu C, Jiang H, Qi HJ. Non-proportional multiaxial ratchetting of ultrahigh molecular weight polyethylene polymer: Experiments and constitutive model Mechanics of Materials. 112: 76-87. DOI: 10.1016/J.Mechmat.2017.05.011 |
0.385 |
|
2017 |
Jiang H, Zhang J, Yang Z, Jiang C, Kang G. Modeling of competition between shear yielding and crazing in amorphous polymers’ scratch International Journal of Solids and Structures. 124: 215-228. DOI: 10.1016/J.Ijsolstr.2017.06.033 |
0.44 |
|
2016 |
Kan QH, Li J, Jiang H, Kang GZ. An Improved Thermo-Ratcheting Boundary of Pressure Pipeline Key Engineering Materials. 725: 311-315. DOI: 10.4028/Www.Scientific.Net/Kem.725.311 |
0.314 |
|
2016 |
Chen YF, Kang GZ, Tao R, Jiang H. Experimental Studies on Deformation Behaviors of Rubbery Materials under Cyclic Loading Applied Mechanics and Materials. 853: 106-111. DOI: 10.4028/Www.Scientific.Net/Amm.853.106 |
0.396 |
|
2016 |
Chen K, Kang G, Yu C, Lu F, Jiang H. Time-Dependent Uniaxial Ratchetting of Ultrahigh Molecular Weight Polyethylene Polymer: Viscoelastic-Viscoplastic Constitutive Model Journal of Applied Mechanics, Transactions Asme. 83. DOI: 10.1115/1.4034120 |
0.401 |
|
2016 |
Chen K, Kang G, Lu F, Xu J, Jiang H. Temperature‐dependent uniaxial ratchetting of ultra‐high molecular weight polyethylene Fatigue & Fracture of Engineering Materials & Structures. 39: 839-849. DOI: 10.1111/Ffe.12398 |
0.356 |
|
2016 |
Zhu Z, Cheng Q, Jiang C, Zhang J, Jiang H. Scratch behavior of the aged hydrogenated nitrile butadiene rubber Wear. 352: 155-159. DOI: 10.1016/J.Wear.2016.02.010 |
0.338 |
|
2016 |
Cheng Q, Jiang C, Zhang J, Yang Z, Zhu Z, Jiang H. Effect of thermal aging on the scratch behavior of poly (methyl methacrylate) Tribology International. 101: 110-114. DOI: 10.1016/J.Triboint.2016.04.013 |
0.34 |
|
2016 |
Zhang J, Jiang H, Jiang C, Cheng Q, Kang G. In-situ observation of temperature rise during scratch testing of poly (methylmethacrylate) and polycarbonate Tribology International. 95: 1-4. DOI: 10.1016/J.Triboint.2015.10.037 |
0.391 |
|
2016 |
Chen K, Kang G, Lu F, Chen J, Jiang H. Effect of relative humidity on uniaxial cyclic softening/hardening and intrinsic heat generation of polyamide-6 polymer Polymer Testing. 56: 19-28. DOI: 10.1016/J.Polymertesting.2016.09.020 |
0.332 |
|
2016 |
Lu F, Kang G, Zhu Y, Xi C, Jiang H. Experimental observation on multiaxial ratchetting of polycarbonate polymer at room temperature Polymer Testing. 50: 135-144. DOI: 10.1016/J.Polymertesting.2016.01.011 |
0.379 |
|
2016 |
Li H, Kang G, Liu Y, Jiang H. Non-proportionally multiaxial cyclic deformation of AZ31 magnesium alloy: Experimental observations Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 671: 70-81. DOI: 10.1016/J.Msea.2016.06.043 |
0.354 |
|
2016 |
Rao W, Zhang J, Jiang H, Kang G. Meso-mechanical constitutive model of bulk metallic glass matrix composites Mechanics of Materials. 103: 68-77. DOI: 10.1016/J.Mechmat.2016.09.008 |
0.34 |
|
2015 |
Zhang J, Jiang H, Kang G, Jiang C, Lu F. A new form of equivalent stress for combined axial–torsional loading considering the tension–compression asymmetry of polymeric materials Rsc Advances. 5: 72780-72784. DOI: 10.1039/C5Ra15230E |
0.379 |
|
2015 |
Jiang H, Cheng Q, Jiang C, Zhang J, Yonghua L. Effect of stick-slip on the scratch performance of polypropylene Tribology International. 91: 1-5. DOI: 10.1016/J.Triboint.2015.06.024 |
0.391 |
|
2015 |
Zhang J, Jiang H, Jiang C, Kang G, Lu F. Accelerated ratcheting testing of polycarbonate using the time-temperature-stress equivalence method Polymer Testing. 44: 8-14. DOI: 10.1016/J.Polymertesting.2015.03.014 |
0.353 |
|
2015 |
Xi C, Kang G, Lu F, Zhang J, Jiang H. An experimental study on uniaxial ratcheting of polycarbonate polymers with different molecular weights Materials & Design. 67: 644-648. DOI: 10.1016/J.Matdes.2014.11.015 |
0.396 |
|
2015 |
Chen K, Kang G, Lu F, Jiang H. Uniaxial cyclic deformation and internal heat production of ultra-high molecular weight polyethylene Journal of Polymer Research. 22. DOI: 10.1007/S10965-015-0870-8 |
0.36 |
|
2015 |
Jiang CK, Jiang H, Zhang JW, Kang GZ. A viscoelastic–plastic constitutive model for uniaxial ratcheting behaviors of polycarbonate Polymer Engineering and Science. 55: 2559-2565. DOI: 10.1002/Pen.24148 |
0.43 |
|
2015 |
Jiang C, Jiang H, Zhu Z, Zhang J, Guo S, Xiong Y. Application of time–temperature–stress superposition principle on the accelerated physical aging test of polycarbonate Polymer Engineering and Science. 55: 2215-2221. DOI: 10.1002/Pen.24106 |
0.322 |
|
2014 |
Lu F, Kang G, Jiang H, Zhang J, Liu Y. Experimental studies on the uniaxial ratchetting of polycarbonate polymer at different temperatures Polymer Testing. 39: 92-100. DOI: 10.1016/J.Polymertesting.2014.07.019 |
0.353 |
|
2014 |
Kang G, Dong Y, Liu Y, Jiang H. Macroscopic and microscopic investigations on uniaxial ratchetting of two-phase Ti–6Al–4V alloy Materials Characterization. 92: 26-35. DOI: 10.1016/J.Matchar.2014.02.014 |
0.317 |
|
2013 |
Jiang H, Zhang J, Kang G, Xi C, Jiang C, Liu Y. A test procedure for separating viscous recovery and accumulated unrecoverable deformation of polymer under cyclic loading Polymer Testing. 32: 1445-1451. DOI: 10.1016/J.Polymertesting.2013.09.008 |
0.392 |
|
2013 |
Dong Y, Kang G, Liu Y, Jiang H. Multiaxial ratcheting of 20 carbon steel: Macroscopic experiments and microscopic observations Materials Characterization. 83: 1-12. DOI: 10.1016/J.Matchar.2013.05.014 |
0.345 |
|
2012 |
Zhang JW, Jiang H. Study of Material Parameters’ Effect on Polymer Scratch Using SOM Method Advanced Materials Research. 1420-1423. DOI: 10.4028/Www.Scientific.Net/Amr.452-453.1420 |
0.401 |
|
2012 |
Yao Y, Cai LX, Bao C, Jiang H. The Fined COD Transform Formula for CT Specimens to Investigate Material Fracture Toughness Applied Mechanics and Materials. 188: 11-16. DOI: 10.4028/Www.Scientific.Net/Amm.188.11 |
0.301 |
|
2012 |
Pan D, Kang G, Jiang H. Viscoelastic Constitutive Model for Uniaxial Time-Dependent Ratcheting of Polyetherimide Polymer Polymer Engineering and Science. 52: 1874-1881. DOI: 10.1002/Pen.23144 |
0.42 |
|
2011 |
Hossain MM, Jiang H, Sue HJ. Effect of constitutive behavior on scratch visibility resistance of polymers-A finite element method parametric study Wear. 270: 751-759. DOI: 10.1016/J.Wear.2011.01.022 |
0.6 |
|
2011 |
Jiang H, Browning R, Liu P, Chang TA, Sue HJ. Determination of epoxy coating wet-adhesive strength using a standardized ASTM/ISO scratch test Journal of Coatings Technology Research. 8: 255-263. DOI: 10.1007/S11998-010-9296-8 |
0.68 |
|
2010 |
Jiang H, Browning RL, Hossain MM, Sue HJ, Fujiwara M. Quantitative evaluation of scratch visibility resistance of polymers Applied Surface Science. 256: 6324-6329. DOI: 10.1016/J.Apsusc.2010.04.011 |
0.697 |
|
2010 |
Jiang H, Browning R, Whitcomb JD, Ito M, Shimouse M, Chang TA, Sue HJ. Mechanical modeling of scratch behavior of polymeric coatings on hard and soft substrates Tribology Letters. 37: 159-167. DOI: 10.1007/S11249-009-9505-8 |
0.688 |
|
2009 |
Jiang H, Browning R, Sue HJ. Understanding of scratch-induced damage mechanisms in polymers Polymer. 50: 4056-4065. DOI: 10.1016/J.Polymer.2009.06.061 |
0.713 |
|
2009 |
Moghbelii E, Sun L, Jiang H, Boo WJ, Sue HJ. Scratch behawior of epoxy nanocomposítes containing α-zirconium phosphate and core-shell rubber particles Polymer Engineering and Science. 49: 483-490. DOI: 10.1002/Pen.21305 |
0.737 |
|
2008 |
Browning RL, Jiang H, Sue HJ. Chapter 15. Scratch behavior of polymeric materials Tribology and Interface Engineering Series. 55: 354-373. DOI: 10.1016/S1572-3364(08)55015-4 |
0.711 |
|
2008 |
Jiang H, Browning R, Fincher J, Gasbarro A, Jones S, Sue HJ. Influence of surface roughness and contact load on friction coefficient and scratch behavior of thermoplastic olefins Applied Surface Science. 254: 4494-4499. DOI: 10.1016/J.Apsusc.2008.01.067 |
0.682 |
|
2008 |
Browning RL, Jiang H, Moyse A, Sue HJ, Iseki Y, Ohtani K, Ijichi Y. Scratch behavior of soft thermoplastic olefins: Effects of ethylene content and testing rate Journal of Materials Science. 43: 1357-1365. DOI: 10.1007/S10853-007-2283-5 |
0.692 |
|
2007 |
Jiang H, Lim GT, Reddy JN, Whitcomb JD, Sue H. Finite element method parametric study on scratch behavior of polymers Journal of Polymer Science Part B: Polymer Physics. 45: 1435-1447. DOI: 10.1002/Polb.21169 |
0.602 |
|
Show low-probability matches. |