Year |
Citation |
Score |
2020 |
Li X, Guo J, Ma X, Yang L, Lee KM, Xiong C. Flexible Capacitive Curvature Sensor with One-Time Calibration for Amphibious Gait Monitoring. Soft Robotics. PMID 32456544 DOI: 10.1089/Soro.2019.0151 |
0.582 |
|
2020 |
Xie Y, Lee K. Spine-Equivalent Beam Modeling Method With In Vivo Validation for the Analysis of Sagittal Standing Flexion Ieee-Asme Transactions On Mechatronics. 25: 2075-2087. DOI: 10.1109/Tmech.2020.3007652 |
0.34 |
|
2020 |
Jiang J, Li W, Lee K. A Novel Pantographic Exoskeleton Based Collocated Joint Design With Application for Early Stroke Rehabilitation Ieee-Asme Transactions On Mechatronics. 25: 1922-1932. DOI: 10.1109/Tmech.2020.2992993 |
0.305 |
|
2020 |
Hao B, Lee K, Chang I. Magnetic Machine Perception for Reconstruction of Non-uniform Electrical Conductivity based on Eddy Current Model Ieee-Asme Transactions On Mechatronics. 1-1. DOI: 10.1109/Tmech.2020.2992777 |
0.33 |
|
2020 |
Ma H, Guo J, Wu J, Xiong Z, Lee K. An Active Control Method for Chatter Suppression in Thin Plate Turning Ieee Transactions On Industrial Informatics. 16: 1742-1753. DOI: 10.1109/Tii.2019.2924829 |
0.592 |
|
2020 |
Elsheikh AH, Guo J, Bai K, Lee K. Improving Clamping Accuracy of Thin-walled Workpiece in Turning Operation Iop Conference Series: Materials Science and Engineering. 751: 012080. DOI: 10.1088/1757-899x/751/1/012080 |
0.437 |
|
2020 |
Hao B, Lee K, Bai K. Distributed current source modeling method for 3D eddy current problem in magnetic conductor with discrete state-space J-φ formulation Journal of Computational Physics. 401: 109027. DOI: 10.1016/J.Jcp.2019.109027 |
0.371 |
|
2019 |
Li M, Lee K. Machine Perception Based on Eddy Current for Physical Field Reconstruction of Conductivity and Hidden Geometrical Features Ieee Transactions On Industrial Informatics. 15: 5392-5403. DOI: 10.1109/Tii.2019.2910857 |
0.393 |
|
2019 |
Huang Y, Ji J, Lee K. Model-Based Digital Image Correlation for Noncontact Deformation Measurement of Strain Field and Mechanical Property Ieee Transactions On Industrial Informatics. 15: 5109-5118. DOI: 10.1109/Tii.2019.2896167 |
0.346 |
|
2019 |
Lee K, Hao B, Li M, Bai K. Multiparameter Eddy-Current Sensor Design for Conductivity Estimation and Simultaneous Distance and Thickness Measurements Ieee Transactions On Industrial Informatics. 15: 1647-1657. DOI: 10.1109/Tii.2018.2843319 |
0.38 |
|
2019 |
Guo J, Wang Z, Fu J, Lee K. Articular Geometry Reconstruction for Knee Joint with a Wearable Compliant Device Robotica. 37: 2104-2118. DOI: 10.1017/S0263574719000778 |
0.56 |
|
2019 |
Bai K, Qin J, Lee K, Hao B. Design and chatter prediction analysis of a duplex face turning machine for manufacturing disk-like workpieces International Journal of Machine Tools and Manufacture. 140: 12-19. DOI: 10.1016/J.Ijmachtools.2019.01.006 |
0.341 |
|
2018 |
Yu M, Guo J, Lee K. A Modal Expansion Method for Displacement and Strain Field Reconstruction of a Thin-Wall Component During Machining Ieee/Asme Transactions On Mechatronics. 23: 1028-1037. DOI: 10.1109/Tmech.2018.2790922 |
0.582 |
|
2018 |
Lin C, Lee K, Hao B. Distributed Current Source Method for Modeling Magnetic and Eddy-Current Fields Induced in Nonferrous Metallic Objects Ieee/Asme Transactions On Mechatronics. 23: 1038-1049. DOI: 10.1109/Tmech.2017.2771763 |
0.406 |
|
2018 |
Ji J, Huang Y, Lee K. A Hybrid Method Based on Macro–Micro Modeling and Infrared Imaging for Tool Temperature Reconstruction in Dry Turning Ieee/Asme Transactions On Mechatronics. 23: 1019-1027. DOI: 10.1109/Tmech.2017.2731803 |
0.354 |
|
2018 |
Li L, Lee K, Bai K, Ouyang X, Yang H. Inverse Models and Harmonics Compensation for Suppressing Torque Ripples of Multiphase Permanent Magnet Motor Ieee Transactions On Industrial Electronics. 65: 8730-8739. DOI: 10.1109/Tie.2018.2808935 |
0.37 |
|
2018 |
Bai K, Xu R, Lee K, Dai W, Huang Y. Design and Development of a Spherical Motor for Conformal Printing of Curved Electronics Ieee Transactions On Industrial Electronics. 65: 9190-9200. DOI: 10.1109/Tie.2018.2808931 |
0.344 |
|
2018 |
Lee K, Huang Y, Ji J, Lin C. An Online Tool Temperature Monitoring Method Based on Physics-Guided Infrared Image Features and Artificial Neural Network for Dry Cutting Ieee Transactions On Automation Science and Engineering. 15: 1665-1676. DOI: 10.1109/Tase.2018.2826362 |
0.354 |
|
2018 |
Elsheikh AH, Guo J, Lee K. Thermal deflection and thermal stresses in a thin circular plate under an axisymmetric heat source Journal of Thermal Stresses. 42: 361-373. DOI: 10.1080/01495739.2018.1482807 |
0.541 |
|
2018 |
Elsheikh AH, Guo J, Huang Y, Ji J, Lee K. Temperature field sensing of a thin-wall component during machining: Numerical and experimental investigations International Journal of Heat and Mass Transfer. 126: 935-945. DOI: 10.1016/J.Ijheatmasstransfer.2018.06.006 |
0.582 |
|
2018 |
Bai K, Zhu L, Yuan M, Lee K. Design concept development of a variable magnetization motor with improved efficiency and controllable stiffness for robotic applications Science China Technological Sciences. 62: 39-46. DOI: 10.1007/S11431-018-9406-5 |
0.358 |
|
2018 |
Huang Y, Ji J, Lee K. An improved material constitutive model considering temperature-dependent dynamic recrystallization for numerical analysis of Ti-6Al-4V alloy machining The International Journal of Advanced Manufacturing Technology. 97: 3655-3670. DOI: 10.1007/S00170-018-2210-8 |
0.319 |
|
2017 |
Lee K, Yang L, Bai K, Ji J. An Efficient Flexible Division Algorithm for Predicting Temperature-Fields of Mechatronic System with Manufacturing Applications Ieee/Asme Transactions On Mechatronics. 22: 1818-1827. DOI: 10.1109/Tmech.2017.2715559 |
0.376 |
|
2017 |
Bai K, Lee K, Cao J, Xu R, Li L. Design and Decoupled Compensation Methods of a PM Motor Capable of 6-D Force/Torque Actuation for Minimum Bearing Reaction Ieee/Asme Transactions On Mechatronics. 22: 2252-2264. DOI: 10.1109/Tmech.2017.2713397 |
0.389 |
|
2017 |
Lee K, Lin C, Hao B, Li M. Coupled Parametric Effects on Magnetic Fields of Eddy-Current Induced in Non-Ferrous Metal Plate for Simultaneous Estimation of Geometrical Parameters and Electrical Conductivity Ieee Transactions On Magnetics. 53: 1-9. DOI: 10.1109/Tmag.2017.2715831 |
0.395 |
|
2016 |
Guo J, Lau AH, Chau J, Ng BK, Lee KM, Qiu Y, Cheng JC, Lam TP. A validation study on the traditional Chinese version of Spinal Appearance Questionnaire for adolescent idiopathic scoliosis. European Spine Journal : Official Publication of the European Spine Society, the European Spinal Deformity Society, and the European Section of the Cervical Spine Research Society. PMID 27167743 DOI: 10.1007/s00586-016-4590-5 |
0.418 |
|
2016 |
Wang D, Lee KM, Ji J. A Passive Gait-Based Weight-Support Lower Extremity Exoskeleton with Compliant Joints Ieee Transactions On Robotics. 32: 933-942. DOI: 10.1109/Tro.2016.2572692 |
0.314 |
|
2016 |
Lee K, Li M, Lin C. Magnetic Tensor Sensor and Way-Finding Method Based on Geomagnetic Field Effects With Applications for Visually Impaired Users Ieee/Asme Transactions On Mechatronics. 21: 2694-2704. DOI: 10.1109/Tmech.2016.2582850 |
0.362 |
|
2016 |
Ji J, Xie Y, Lee KM. Coupled multiview vision and physics-based synthetic perception for 4-D displacement field reconstruction Ieee/Asme Transactions On Mechatronics. 21: 980-992. DOI: 10.1109/Tmech.2015.2468574 |
0.335 |
|
2016 |
Lee KM, Li M. Magnetic Tensor Sensor for Gradient-Based Localization of Ferrous Object in Geomagnetic Field Ieee Transactions On Magnetics. 52. DOI: 10.1109/Tmag.2016.2535307 |
0.37 |
|
2016 |
Bai K, Lee K, Lu J. A magnetic flux model based method for detecting multi-DOF motion of a permanent magnet spherical motor Mechatronics. 39: 217-225. DOI: 10.1016/J.Mechatronics.2016.06.001 |
0.401 |
|
2015 |
Koh M, Yong HY, Kim ES, Son H, Rim Jeon Y, Hwang JS, Kim MO, Cha Y, Soo Choi W, Noh DY, Lee KM, Kim KB, Lee JS, Joon Kim H, Kim H, et al. A Novel Role for Flotillin-1 in H-Ras-regulated Breast Cancer Aggressiveness. International Journal of Cancer. Journal International Du Cancer. PMID 26413934 DOI: 10.1002/ijc.29869 |
0.45 |
|
2015 |
Shen HM, Lee KM, Hu L, Foong S, Fu X. Effects of reconstructed magnetic field from sparse noisy boundary measurements on localization of active neural source. Medical & Biological Engineering & Computing. PMID 26358243 DOI: 10.1007/S11517-015-1381-9 |
0.597 |
|
2015 |
Lee KM, Cheng K, Ding H, Kazmer DO, Lin W, Luo RC, Melkote SN. Guest editorial introduction to the focused section on mechatronics for intelligent manufacturing Ieee/Asme Transactions On Mechatronics. 20: 1001-1004. DOI: 10.1109/Tmech.2015.2422214 |
0.3 |
|
2015 |
Lim J, Lee K. Design of Electromagnetic Actuators Using Layout Optimization With Distributed Current Source Models Ieee/Asme Transactions On Mechatronics. 20: 2726-2735. DOI: 10.1109/Tmech.2015.2404031 |
0.36 |
|
2015 |
Lim J, Lee KM. Distributed Multilevel Current Models for Design Analysis of Electromagnetic Actuators Ieee/Asme Transactions On Mechatronics. 20: 2413-2424. DOI: 10.1109/Tmech.2014.2382532 |
0.426 |
|
2015 |
Guo J, Lee K, Liu W, Wang B. Design Criteria Based on Modal Analysis for Vibration Sensing of Thin-Wall Plate Machining Ieee/Asme Transactions On Mechatronics. 20: 1406-1417. DOI: 10.1109/Tmech.2014.2360371 |
0.593 |
|
2015 |
Fan BQ, Lee KM, Ouyang XP, Yang HY. Soft-Switchable Dual-PI Controlled Axial Loading System for High-Speed EMU Axle-Box Bearing Test Rig Ieee Transactions On Industrial Electronics. 62: 7370-7381. DOI: 10.1109/Tie.2015.2458303 |
0.322 |
|
2015 |
Xu QN, Lee KM, Zhou H, Yang HY. Model-Based Fault Detection and Isolation Scheme for a Rudder Servo System Ieee Transactions On Industrial Electronics. 62: 2384-2396. DOI: 10.1109/Tie.2014.2361795 |
0.308 |
|
2014 |
Guo J, Lam TP, Wong MS, Ng BK, Lee KM, Liu KL, Hung LH, Lau AH, Sin SW, Kwok WK, Yu FW, Qiu Y, Cheng JC. A prospective randomized controlled study on the treatment outcome of SpineCor brace versus rigid brace for adolescent idiopathic scoliosis with follow-up according to the SRS standardized criteria. European Spine Journal : Official Publication of the European Spine Society, the European Spinal Deformity Society, and the European Section of the Cervical Spine Research Society. 23: 2650-7. PMID 24378629 DOI: 10.1007/S00586-013-3146-1 |
0.427 |
|
2014 |
Ji J, Lee K, Guo J, Zhang S. Discrete Deformation Models for Real-Time Computation of Compliant Mechanisms in Two- and Three-Dimensional Space Ieee-Asme Transactions On Mechatronics. 19: 1636-1650. DOI: 10.1109/Tmech.2013.2291786 |
0.584 |
|
2014 |
Wang D, Lee K, Guo J, Yang C. Adaptive Knee Joint Exoskeleton Based on Biological Geometries Ieee/Asme Transactions On Mechatronics. 19: 1268-1278. DOI: 10.1109/Tmech.2013.2278207 |
0.549 |
|
2014 |
Bai K, Lee K. Direct Field-Feedback Control of a Ball-Joint-Like Permanent-Magnet Spherical Motor Ieee/Asme Transactions On Mechatronics. 19: 975-986. DOI: 10.1109/Tmech.2013.2264565 |
0.421 |
|
2014 |
Son H, Lee KM. Control system design and input shape for orientation of spherical wheel motor Control Engineering Practice. 24: 120-128. DOI: 10.1016/J.Conengprac.2013.11.013 |
0.631 |
|
2013 |
Oh GJ, Park SW, Yun KD, Lim HP, Son HJ, Koh JT, Lee KK, Lee DJ, Lee KM, Fisher JG. Effect of transition metal dopants on mechanical properties and biocompatibility of zirconia ceramics. Journal of Nanoscience and Nanotechnology. 13: 4252-5. PMID 23862482 DOI: 10.1166/jnn.2013.7031 |
0.459 |
|
2013 |
Bai K, Lee K. A Sensor-Less Motion Sensing Method of a 3-DOF Permanent Magnet Spherical Motor Ifac Proceedings Volumes. 46: 160-164. DOI: 10.3182/20130410-3-Cn-2034.00121 |
0.405 |
|
2013 |
Chen Y, Lee K, Lin C, Fu X. Lumped-Parameter Modeling of an Immersion Flow Field for Analyzing Meniscus Dynamic Behavior Journal of Dynamic Systems, Measurement, and Control. 136. DOI: 10.1115/1.4024889 |
0.328 |
|
2013 |
Li Y, Cai C, Lee K, Teng F. A Novel Cascade Temperature Control System for a High-Speed Heat-Airflow Wind Tunnel Ieee/Asme Transactions On Mechatronics. 18: 1310-1319. DOI: 10.1109/Tmech.2013.2262077 |
0.307 |
|
2013 |
Wang L, Hu L, Lee K, Ruan X, Fu X. Erratum to “Analytical Magnetic Field and Driving Force Models Based on Measured Boundary Conditions for Industrial Coriolis Mass Flowmeters” [Dec12 4753-4760] Ieee Transactions On Industrial Electronics. 60: 2771-2771. DOI: 10.1109/Tie.2012.2227917 |
0.309 |
|
2013 |
Guo J, Lee K. Compliant joint design and flexure finger dynamic analysis using an equivalent pin model Mechanism and Machine Theory. 70: 338-353. DOI: 10.1016/J.Mechmachtheory.2013.08.001 |
0.593 |
|
2012 |
Zhu D, Fang CH, Cho C, Guo J, Wang Y, Lee KM. Finite element model updating of a space frame bridge with mobile sensing data Proceedings of Spie - the International Society For Optical Engineering. 8345. DOI: 10.1117/12.914942 |
0.576 |
|
2012 |
Zhu D, Guo J, Cho C, Wang Y, Lee K. Wireless Mobile Sensor Network for the System Identification of a Space Frame Bridge Ieee/Asme Transactions On Mechatronics. 17: 499-507. DOI: 10.1109/Tmech.2012.2187915 |
0.574 |
|
2012 |
Yan L, Chen I, Lim CK, Yang G, Lee K. Modeling and Iron-Effect Analysis on Magnetic Field and Torque Output of Electromagnetic Spherical Actuators With Iron Stator Ieee/Asme Transactions On Mechatronics. 17: 1080-1087. DOI: 10.1109/Tmech.2011.2159238 |
0.331 |
|
2012 |
Foong S, Lee KM, Bai K. Harnessing embedded magnetic fields for angular sensing with nanodegree accuracy Ieee/Asme Transactions On Mechatronics. 17: 687-696. DOI: 10.1109/Tmech.2011.2119325 |
0.622 |
|
2012 |
Liu F, Lee K, Yang C. Hydrodynamics of an Undulating Fin for a Wave-Like Locomotion System Design Ieee/Asme Transactions On Mechatronics. 17: 554-562. DOI: 10.1109/Tmech.2011.2107747 |
0.362 |
|
2012 |
Guo J, Lee K, Zhu D, Yi X, Wang Y. Large-Deformation Analysis and Experimental Validation of a Flexure-Based Mobile Sensor Node Ieee/Asme Transactions On Mechatronics. 17: 606-616. DOI: 10.1109/Tmech.2011.2107579 |
0.605 |
|
2012 |
Yan L, Hu J, Yao N, Jiao Z, Chen I, Lee K. Flux Field Formulation and Back-Iron Analysis of Tubular Linear Machines Ieee Transactions On Magnetics. 48: 2617-2626. DOI: 10.1109/Tmag.2012.2199997 |
0.381 |
|
2012 |
Wang L, Hu L, Lee K, Ruan X, Fu X. Analytical Magnetic Field and Driving Force Models Based on Measured Boundary Conditions for Industrial Coriolis Mass Flowmeters Ieee Transactions On Industrial Electronics. 59: 4753-4760. DOI: 10.1109/Tie.2011.2177614 |
0.393 |
|
2012 |
Bai K, Ji J, Lee K, Zhang S. A two-mode six-DOF motion system based on a ball-joint-like spherical motor for haptic applications Computers & Mathematics With Applications. 64: 978-987. DOI: 10.1016/J.Camwa.2012.02.037 |
0.372 |
|
2012 |
Lee K, Liu C. Explicit dynamic finite element analysis of an automated grasping process using highly damped compliant fingers Computers & Mathematics With Applications. 64: 965-977. DOI: 10.1016/J.Camwa.2012.02.033 |
0.37 |
|
2011 |
Foong S, Chen X, Lee KM. Optimized distributed field-based sensing for control of voice coil motor Asme 2011 Dynamic Systems and Control Conference and Bath/Asme Symposium On Fluid Power and Motion Control, Dscc 2011. 2: 145-151. DOI: 10.1115/DSCC2011-5999 |
0.587 |
|
2011 |
Ji J, Lee K, Zhang S. Cantilever Snap-Fit Performance Analysis for Haptic Evaluation Journal of Mechanical Design. 133. DOI: 10.1115/1.4005085 |
0.37 |
|
2011 |
Wu J, Xiong Z, Lee K, Ding H. High-Acceleration Precision Point-to-Point Motion Control With Look-Ahead Properties Ieee Transactions On Industrial Electronics. 58: 4343-4352. DOI: 10.1109/Tie.2010.2098363 |
0.317 |
|
2011 |
Li Y, Lee K. Thermohydraulic Dynamics and Fuzzy Coordination Control of a Microchannel Cooling Network for Space Electronics Ieee Transactions On Industrial Electronics. 58: 700-708. DOI: 10.1109/Tie.2010.2045999 |
0.312 |
|
2011 |
Hu L, Lee K, Zou J, Fu X, Yang H. Adaptive Measurement for Automated Field Reconstruction and Calibration of Magnetic Systems Ieee Transactions On Automation Science and Engineering. 8: 327-337. DOI: 10.1109/Tase.2010.2090654 |
0.372 |
|
2011 |
Bai K, Lee KM, Foong S. Direct field-feedback control for multi-DOF spherical actuators Proceedings - Ieee International Conference On Robotics and Automation. 5825-5830. DOI: 10.1109/ICRA.2011.5980399 |
0.601 |
|
2011 |
Chen Y, Lee K, Fu X. Effect of upper surface characteristics on meniscus stability in immersion flow field Microelectronic Engineering. 88: 1939-1943. DOI: 10.1016/J.Mee.2011.02.045 |
0.329 |
|
2011 |
Son H, Lee KM. Two-DOF magnetic orientation sensor using distributed multipole models for spherical wheel motor Mechatronics. 21: 156-165. DOI: 10.1016/J.Mechatronics.2010.10.001 |
0.654 |
|
2011 |
Yan L, Chen I, Lim CK, Yang G, Lin W, Lee K. Hybrid torque modeling of spherical actuators with cylindrical-shaped magnet poles Mechatronics. 21: 85-91. DOI: 10.1016/J.Mechatronics.2010.08.009 |
0.412 |
|
2010 |
Lee KM, Guo J. Kinematic and dynamic analysis of an anatomically based knee joint. Journal of Biomechanics. 43: 1231-6. PMID 20189182 DOI: 10.1016/J.Jbiomech.2010.02.001 |
0.552 |
|
2010 |
Son H, Bai K, Lim J, Lee K. Design of multi-DOF electromagnetic actuators using distributed multipole models and image method International Journal of Applied Electromagnetics and Mechanics. 34: 195-210. DOI: 10.3233/Jae-2010-1311 |
0.636 |
|
2010 |
Yi X, Zhu D, Wang Y, Guo J, Lee K. Embedded transmissibility function analysis for damage detection in a mobile sensor network Proceedings of Spie. 7647: 764729. DOI: 10.1117/12.847256 |
0.538 |
|
2010 |
Hu L, Lee K, Fu X. A Method Based on Measured Boundary Conditions for Reconstructing the Magnetic Field Distribution of an Electromagnetic Mechatronic System Ieee-Asme Transactions On Mechatronics. 15: 595-602. DOI: 10.1109/Tmech.2009.2030795 |
0.401 |
|
2010 |
Li Y, Lee K, Wang J. Analysis and Control of Equivalent Physical Simulator for Nanosatellite Space Radiator Ieee-Asme Transactions On Mechatronics. 15: 79-87. DOI: 10.1109/Tmech.2009.2016957 |
0.323 |
|
2010 |
Son H, Lee KM. Open-loop controller design and dynamic characteristics of a spherical wheel motor Ieee Transactions On Industrial Electronics. 57: 3475-3482. DOI: 10.1109/Tie.2009.2039454 |
0.62 |
|
2010 |
Lee KM, Foong S. Lateral optical sensor with slip detection for locating live products on moving conveyor Ieee Transactions On Automation Science and Engineering. 7: 123-132. DOI: 10.1109/Tase.2009.2025505 |
0.597 |
|
2010 |
Foong S, Lee KM, Bai K. Magnetic field-based sensing method for spherical joint Proceedings - Ieee International Conference On Robotics and Automation. 5447-5452. DOI: 10.1109/ROBOT.2010.5509790 |
0.593 |
|
2010 |
Zhu D, Yi X, Wang Y, Lee K, Guo J. A mobile sensing system for structural health monitoring: design and validation Smart Materials and Structures. 19: 055011. DOI: 10.1088/0964-1726/19/5/055011 |
0.551 |
|
2010 |
Eason K, Lee KM. The effects of temperature and frequency on the magnetization switching mode in circular MI sensors Journal of Magnetism and Magnetic Materials. 322: 1758-1764. DOI: 10.1016/J.Jmmm.2009.12.023 |
0.646 |
|
2009 |
Oh JH, Choi MG, Kang MI, Lee KM, Kim JI, Kim BW, Lee DS, Kim SS, Choi H, Han SW, Choi KY, Son HY, Chung IS. The prevalence of gastrointestinal symptoms in patients with non-insulin dependent diabetes mellitus. The Korean Journal of Internal Medicine. 24: 309-17. PMID 19949728 DOI: 10.3904/kjim.2009.24.4.309 |
0.443 |
|
2009 |
Zhu D, Qi Q, Wang Y, Lee KM, Foong S. A prototype mobile sensor network for structural health monitoring Proceedings of Spie - the International Society For Optical Engineering. 7294. DOI: 10.1117/12.815863 |
0.584 |
|
2009 |
Lee K, Bai K, Lim J. Dipole Models for Forward/Inverse Torque Computation of a Spherical Motor Ieee/Asme Transactions On Mechatronics. 14: 46-54. DOI: 10.1109/Tmech.2008.2010935 |
0.396 |
|
2009 |
Eason K, Lee KM. A numerical investigation of Neel wall effects in amorphous MI Ribbons Ieee Transactions On Magnetics. 45: 2059-2067. DOI: 10.1109/Tmag.2009.2012502 |
0.647 |
|
2009 |
Lim CK, Chen I, Yan L, Yang G, Lee K. Electromechanical Modeling of a Permanent-Magnet Spherical Actuator Based on Magnetic-Dipole-Moment Principle Ieee Transactions On Industrial Electronics. 56: 1640-1648. DOI: 10.1109/Tie.2008.2009526 |
0.436 |
|
2009 |
Foong S, Lee KM. Magnetic field-based multi-DOF orientation sensor for PM-based spherical actuators Ieee/Asme International Conference On Advanced Intelligent Mechatronics, Aim. 481-486. DOI: 10.1109/AIM.2009.5229968 |
0.587 |
|
2009 |
Foong S, Lee KM. Organized sensor network design for active feedback control Ieee/Asme International Conference On Advanced Intelligent Mechatronics, Aim. 572-577. DOI: 10.1109/AIM.2009.5229952 |
0.534 |
|
2008 |
Son H, Lee KM. Design of controllers for a multi-degree-of-freedom spherical wheel motor Asme International Mechanical Engineering Congress and Exposition, Proceedings. 9: 973-979. DOI: 10.1115/IMECE2007-42347 |
0.566 |
|
2008 |
Lee KM, Son H. Design of a magnetic field-based multi degree-of-freedom orientation sensor using the distrbuted-multiple-pole model Asme International Mechanical Engineering Congress and Exposition, Proceedings. 9: 883-888. DOI: 10.1115/IMECE2007-42106 |
0.616 |
|
2008 |
Li Q, Lee K. An Adaptive Meshless Method for Analyzing Large Mechanical Deformation and Contacts Journal of Applied Mechanics. 75. DOI: 10.1115/1.2912938 |
0.321 |
|
2008 |
Yan L, Chen I, Lim CK, Yang G, Lin W, Lee K. Design and Analysis of a Permanent Magnet Spherical Actuator Ieee/Asme Transactions On Mechatronics. 13: 239-248. DOI: 10.1109/Tmech.2008.918573 |
0.399 |
|
2008 |
Son H, Lee KM. Distributed multipole models for design and control of PM actuators and sensors Ieee/Asme Transactions On Mechatronics. 13: 228-238. DOI: 10.1109/Tmech.2008.918544 |
0.644 |
|
2008 |
Eason K, Lee KM. Effects of nonlinear micromagnetic coupling on a weak-field magnetoimpedance sensor Ieee Transactions On Magnetics. 44: 2042-2048. DOI: 10.1109/Tmag.2008.922780 |
0.662 |
|
2008 |
Lee KM, Foong S. Lateral optical sensor with slip detection of natural objects on moving conveyor Proceedings - Ieee International Conference On Robotics and Automation. 329-334. DOI: 10.1109/ROBOT.2008.4543229 |
0.549 |
|
2008 |
Lee KM, Foong S, Jones J. Effects of overlapping detection on ellipsoidal object singulation with live broiler handling applications Ieee/Asme International Conference On Advanced Intelligent Mechatronics, Aim. 758-763. DOI: 10.1109/AIM.2008.4601755 |
0.547 |
|
2007 |
Lee KM, Son H. Distributed multipole model for design of permanent-magnet-based actuators Ieee Transactions On Magnetics. 43: 3904-3913. DOI: 10.1109/Tmag.2007.904709 |
0.64 |
|
2007 |
Lee KM, Son H. Equivalent voice-coil models for real-time computation in electromagnetic actuation and sensor applications Ieee/Asme International Conference On Advanced Intelligent Mechatronics, Aim. DOI: 10.1109/AIM.2007.4412602 |
0.6 |
|
2007 |
Son H, Lee KM. Distributed Multi-Pole Model for Motion Simulation of PM-based Spherical Motors Ieee/Asme International Conference On Advanced Intelligent Mechatronics, Aim. DOI: 10.1109/AIM.2007.4412439 |
0.618 |
|
2006 |
Yan L, Chen I, Yang G, Lee K. Analytical and experimental investigation on the magnetic field and torque of a permanent magnet spherical actuator Ieee-Asme Transactions On Mechatronics. 11: 409-419. DOI: 10.1109/Tmech.2006.878545 |
0.416 |
|
2006 |
Lee K, Li Q, Sun H. Effects of numerical formulation on magnetic field computation using meshless methods Ieee Transactions On Magnetics. 42: 2164-2171. DOI: 10.1109/Tmag.2006.880401 |
0.373 |
|
2006 |
Li Q, Lee K. An adaptive meshless method for magnetic field computation Ieee Transactions On Magnetics. 42: 1996-2003. DOI: 10.1109/Tmag.2006.876126 |
0.403 |
|
2006 |
Lee K, Wei Z, Zhou Z. Modeling by numerical reduction of modes for multivariable control of an optical-fiber draw process Ieee Transactions On Automation Science and Engineering. 3: 119-130. DOI: 10.1109/Tase.2005.860993 |
0.569 |
|
2006 |
Lee K, Wei Z, Zhou Z, Hong S. Computational thermal fluid models for design of a modern fiber draw process Ieee Transactions On Automation Science and Engineering. 3: 108-118. DOI: 10.1109/Tase.2005.859657 |
0.592 |
|
2005 |
Lan C, Lee K. Generalized Shooting Method for Analyzing Compliant Mechanisms With Curved Members Journal of Mechanical Design. 128: 765-775. DOI: 10.1115/1.2202139 |
0.495 |
|
2004 |
Wei Z, Lee K, Zhou Z, Hong S. Computational Model for Predicting the Location of Glass Solidification in Optic Fiber Drawing Volume!. 921-927. DOI: 10.1115/Ht-Fed2004-56251 |
0.552 |
|
2004 |
Wei Z, Lee KM, Tchikanda SW, Zhou Z, Hong SP. Free surface flow in high speed fiber drawing with large-diameter glass preforms Journal of Heat Transfer. 126: 713-722. DOI: 10.1115/1.1795237 |
0.76 |
|
2004 |
Wei Z, Lee K, Zhou Z, Hong S. Modeling of Advanced Melting Zone for Manufacturing of Optical Fibers Journal of Manufacturing Science and Engineering. 126: 377-387. DOI: 10.1115/1.1751426 |
0.571 |
|
2004 |
Lee K, Zhou D. A Real-Time Optical Sensor for Simultaneous Measurement of Three-DOF Motions Ieee/Asme Transactions On Mechatronics. 9: 499-507. DOI: 10.1109/Tmech.2004.834642 |
0.378 |
|
2004 |
Lee KM, Sosseh RA, Wei Z. Effects of the torque model on the control of a VR spherical motor Control Engineering Practice. 12: 1437-1449. DOI: 10.1016/S0967-0661(03)00155-2 |
0.764 |
|
2003 |
Wei Z, Lee KM, Tchikanda SW, Zhou Z, Hong SP. Effects of radiative transfer modeling on transient temperature distribution in semitransparent glass rod Journal of Heat Transfer. 125: 635-643. DOI: 10.1115/1.1565081 |
0.748 |
|
2003 |
Lee K, Ezenekwe DE, He T. Design and control of a spherical air-bearing system for multi-d.o.f. ball-joint-like actuators Mechatronics. 13: 175-194. DOI: 10.1016/S0957-4158(01)00037-X |
0.387 |
|
2002 |
Kim SH, Jung KC, Shin YK, Lee KM, Park YS, Choi YL, Oh KI, Kim MK, Chung DH, Son HG, Park SH. The enhanced reactivity of endogenous biotin-like molecules by antigen retrieval procedures and signal amplification with tyramine. The Histochemical Journal. 34: 97-103. PMID 12495214 |
0.465 |
|
2002 |
Yin X, Lee K. Modeling and Analysis of Grasping Dynamics for High Speed Transfer of Live Birds Ifac Proceedings Volumes. 35: 669-674. DOI: 10.1016/S1474-6670(17)34016-8 |
0.594 |
|
2000 |
Garner HD, Lee K, Guo L. Development of a Grating Interferometer with Application to HDD Servo-Track Writing Journal of Manufacturing Science and Engineering. 123: 445-452. DOI: 10.1115/1.1360694 |
0.769 |
|
1999 |
Lee K, Rutherford C. Frequency reshaped quadratic control of a low-cost human-level performance belt-driven robot Mechatronics. 9: 95-110. DOI: 10.1016/S0957-4158(98)00042-7 |
0.337 |
|
1998 |
Lee K, Qian Y. Intelligent Vision-Based Part-Feeding on Dynamic Pursuit of Moving Objects Journal of Manufacturing Science and Engineering. 120: 640-647. DOI: 10.1117/12.227214 |
0.302 |
|
1998 |
Lee K, Qian Y. A vision-guided fuzzy logic control system for dynamic pursuit of a moving target Microprocessors and Microsystems. 21: 571-580. DOI: 10.1016/S0141-9331(98)00032-5 |
0.321 |
|
1996 |
Lee K, Roth RB, Zhou Z. Dynamic Modeling and Control of a Ball-Joint-Like Variable-Reluctance Spherical Motor Journal of Dynamic Systems, Measurement, and Control. 118: 29-40. DOI: 10.1115/1.2801148 |
0.392 |
|
1995 |
Roth RB, Lee K. Design Optimization of a Three Degrees-of-Freedom Variable-Reluctance Spherical Wrist Motor Journal of Engineering For Industry. 117: 378-388. DOI: 10.1115/1.2804344 |
0.381 |
|
1994 |
Lee K. Design Concept of an Integrated Vision System for Cost-effective Part-Presentation Journal of Engineering For Industry. 116: 421-428. DOI: 10.1115/1.2902123 |
0.355 |
|
1994 |
Lee K, Pei J, Roth R. Kinematic analysis of a three-degrees-of-freedom spherical wrist actuator Mechatronics. 4: 581-605. DOI: 10.1016/0957-4158(94)90026-4 |
0.371 |
|
1994 |
Lee K, Blenis R. Design concept and prototype development of a flexible integrated vision system Journal of Robotic Systems. 11: 387-398. DOI: 10.1002/Rob.4620110505 |
0.338 |
|
1993 |
Lee K, Meyouhas G, Blenis R. An Opto-Mechatronic Device for Direct Measurement of Three Degrees-of-Freedom Orientation Ifac Proceedings Volumes. 26: 895-901. DOI: 10.1016/S1474-6670(17)48601-0 |
0.403 |
|
1993 |
Lee K, Meyouhas G, Blenis R. A machine-vision-based wrist sensor for direct measurement of three degrees-of-freedom orientation Mechatronics. 3: 571-587. DOI: 10.1016/0957-4158(93)90025-W |
0.394 |
|
1991 |
Lee KM. Flexible part-feeding system for machine loading and assembly Part II. A cost-effective solution International Journal of Production Economics. 25: 155-168. DOI: 10.1016/0925-5273(91)90141-F |
0.328 |
|
1991 |
Lee KM. Flexible part-feeding system for machine loading and assembly. Part I. A state-of-the-art survey International Journal of Production Economics. 25: 141-153. DOI: 10.1016/0925-5273(91)90140-O |
0.313 |
|
1991 |
Lee K, Li D. Principle and applications of retroreflective vision sensing for discrete part-presentation Journal of Robotic Systems. 8: 55-73. DOI: 10.1002/Rob.4620080105 |
0.319 |
|
1989 |
Lee KM, Yien C. Design and control of a prototype platform manipulator for workholding and workhandling applications Journal of Mechanical Working Technology. 20: 305-314. DOI: 10.1016/0378-3804(89)90040-5 |
0.367 |
|
1987 |
Vachtsevanos G, Davey K, Lee K. Development of a novel intelligent robotic manipulator Ieee Control Systems Magazine. 7: 9-15. DOI: 10.1109/Mcs.1987.1105312 |
0.332 |
|
Show low-probability matches. |