Year |
Citation |
Score |
2021 |
Qiao K, Zhang T, Wang K, Yuan S, Zhang S, Wang L, Wang Z, Peng P, Cai J, Liu C, Wang W. Mg/ZrO Metal Matrix Nanocomposites Fabricated by Friction Stir Processing: Microstructure, Mechanical Properties, and Corrosion Behavior. Frontiers in Bioengineering and Biotechnology. 9: 605171. PMID 33842443 DOI: 10.3389/fbioe.2021.605171 |
0.352 |
|
2020 |
Wang Z, Ummethala R, Singh N, Tang S, Suryanarayana C, Eckert J, Prashanth KG. Selective Laser Melting of Aluminum and Its Alloys. Materials (Basel, Switzerland). 13. PMID 33066589 DOI: 10.3390/ma13204564 |
0.341 |
|
2020 |
Wang Z, Xie M, Li Y, Zhang W, Yang C, Kollo L, Eckert J, Prashanth KG. Premature failure of an additively manufactured material Npg Asia Materials. 12. DOI: 10.1038/S41427-020-0212-0 |
0.655 |
|
2020 |
Song D, Wang S, Zhao Y, Liu S, Du Y, Kang Y, Wang Z, Zhang W. Effect of melt holding on morphological evolution and sedimentation behavior of iron-rich intermetallic phases in Al—Si—Fe—Mn—Mg alloy Transactions of Nonferrous Metals Society of China. 30: 1-13. DOI: 10.1016/S1003-6326(19)65175-7 |
0.344 |
|
2020 |
Wang Z, Gao C, Liu Z, Wang Z, Liu X, Wong K, Zhou Z, Xiao Z. Investigation of microstructural evolution in a selective laser melted Ti6Al4V alloy induced by an ultrasonic surface rolling process Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 772: 138696. DOI: 10.1016/J.Msea.2019.138696 |
0.351 |
|
2020 |
Wang Z, Xie MS, Zhang WW, Yang C, Xie GQ, Louzguine-Luzgin DV. Achieving super-high strength in an aluminum based composite by reinforcing metallic glassy flakes Materials Letters. 262: 127059. DOI: 10.1016/J.Matlet.2019.127059 |
0.432 |
|
2020 |
Zhao C, Wang Z, Li D, Xie M, Kollo L, Luo Z, Zhang W, Prashanth KG. Comparison of additively manufacturing samples fabricated from pre-alloyed and mechanically mixed powders Journal of Alloys and Compounds. 830: 154603. DOI: 10.1016/J.Jallcom.2020.154603 |
0.391 |
|
2020 |
Zhao C, Wang Z, Li D, Pan D, Lou B, Luo Z, Zhang W. Optimization of strength and ductility in an as-extruded Cu–15Ni–8Sn alloy by the additions of Si and Ti Journal of Alloys and Compounds. 823: 153759. DOI: 10.1016/J.Jallcom.2020.153759 |
0.415 |
|
2020 |
Xie MS, Wang Z, Zhang GQ, Yang C, Zhang WW, Prashanth KG. Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix composites Journal of Alloys and Compounds. 814: 152317. DOI: 10.1016/J.Jallcom.2019.152317 |
0.459 |
|
2019 |
Zhang W, Qin P, Wang Z, Yang C, Kollo L, Grzesiak D, Prashanth KG. Superior Wear Resistance in EBM-Processed TC4 Alloy Compared with SLM and Forged Samples. Materials (Basel, Switzerland). 12. PMID 30866448 DOI: 10.3390/Ma12050782 |
0.387 |
|
2019 |
Zhao C, Wang Z, Pan D, Li D, Luo Z, Zhang D, Yang C, Zhang W. Effect of Si and Ti on dynamic recrystallization of high-performance Cu−15Ni−8Sn alloy during hot deformation Transactions of Nonferrous Metals Society of China. 29: 2556-2565. DOI: 10.1016/S1003-6326(19)65163-0 |
0.398 |
|
2019 |
Wang Z, Prashanth KG, Zhang WW, Scudino S, Eckert J. Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases Powder Technology. 343: 733-737. DOI: 10.1016/J.Powtec.2018.11.093 |
0.425 |
|
2019 |
Luo B, Li D, Zhao C, Wang Z, Luo Z, Zhang W. A low Sn content Cu-Ni-Sn alloy with high strength and good ductility Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 746: 154-161. DOI: 10.1016/J.Msea.2018.12.120 |
0.4 |
|
2019 |
Zhao Y, Song D, Lin B, Zhang C, Zheng D, Inguva S, Li T, Sun Z, Wang Z, Zhang W. 3D characterization of ultrasonic melt processing on the microstructural refinement of AlCu alloys using synchrotron X-ray tomography Materials Characterization. 153: 354-365. DOI: 10.1016/J.Matchar.2019.04.040 |
0.417 |
|
2019 |
Zhao Y, Wang Z, Zhang C, Zhang W. Synchrotron X-ray tomography investigation of 3D morphologies of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys Journal of Alloys and Compounds. 777: 1054-1065. DOI: 10.1016/J.Jallcom.2018.10.334 |
0.352 |
|
2019 |
Li X, Yang C, Liu Z, Zou L, Wang Z, Zhang W. Effects of Applied Pressure on the Atomic Diffusion Coefficient During Spark Plasma Sintering of Crystalline Powders Jom. 71: 2475-2483. DOI: 10.1007/S11837-019-03393-Z |
0.332 |
|
2018 |
Zhao Y, Zhang W, Yang C, Zhang D, Wang Z. Effect of Si on Fe-rich intermetallic formation and mechanical properties of heat-treated Al-Cu-Mn-Fe alloys Journal of Materials Research. 33: 898-911. DOI: 10.1557/Jmr.2017.441 |
0.409 |
|
2018 |
Wang Z, Prashanth KG, Surreddi KB, Suryanarayana C, Eckert J, Scudino S. Pressure-assisted sintering of Al–Gd–Ni–Co amorphous alloy powders Materialia. 2: 157-166. DOI: 10.1016/J.Mtla.2018.07.010 |
0.407 |
|
2018 |
Zhang WW, Hu Y, Wang Z, Yang C, Zhang GQ, Prashanth KG, Suryanarayana C. A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 734: 34-41. DOI: 10.1016/J.Msea.2018.07.082 |
0.464 |
|
2018 |
Okulov IV, Bönisch M, Okulov AV, Volegov AS, Attar H, Ehtemam-Haghighi S, Calin M, Wang Z, Hohenwarter A, Kaban I, Prashanth KG, Eckert J. Phase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 733: 80-86. DOI: 10.1016/J.Msea.2018.07.047 |
0.443 |
|
2018 |
Wang Z, Chen C, Ketov SV, Akagi K, Tsarkov AA, Ikuhara Y, Louzguine-Luzgin DV. Local chemical ordering within the incubation period as a trigger for nanocrystallization of a highly supercooled Ti-based liquid Materials & Design. 156: 504-513. DOI: 10.1016/J.Matdes.2018.07.013 |
0.338 |
|
2018 |
Maity T, Prashanth KG, Balçi Ö, Wang Z, Jia YD, Eckert J. Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume Composites Part B-Engineering. 150: 7-13. DOI: 10.1016/J.Compositesb.2018.05.033 |
0.34 |
|
2017 |
Zhao C, Zhang W, Wang Z, Li D, Luo Z, Yang C, Zhang D. Improving the Mechanical Properties of Cu-15Ni-8Sn Alloys by Addition of Titanium. Materials (Basel, Switzerland). 10. PMID 28878192 DOI: 10.3390/Ma10091038 |
0.404 |
|
2017 |
Jiao W, Liu P, Lin H, Zhou W, Wang Z, Fujita T, Hirata A, Li HW, Chen M. Tunable Nanoporous Metallic Glasses Fabricated by Selective Phase Dissolution and Passivation for Ultrafast Hydrogen Uptake Chemistry of Materials. 29: 4478-4483. DOI: 10.1021/Acs.Chemmater.7B01038 |
0.332 |
|
2017 |
Wang Z, Georgarakis K, Zhang WW, Prashanth KG, Eckert J, Scudino S. Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys Wear. 78-84. DOI: 10.1016/J.Wear.2017.04.013 |
0.428 |
|
2017 |
Ding J, Inoue A, Han Y, Kong FL, Zhu SL, Wang Z, Shalaan E, Al-Marzouki F. High entropy effect on structure and properties of (Fe,Co,Ni,Cr)-B amorphous alloys Journal of Alloys and Compounds. 696: 345-352. DOI: 10.1016/J.Jallcom.2016.11.223 |
0.388 |
|
2017 |
Wang Z, Ketov SV, Chen CL, Shen Y, Ikuhara Y, Tsarkov AA, Louzguine-Luzgin DV, Perepezko JH. Nucleation and thermal stability of an icosahedral nanophase during the early crystallization stage in Zr-Co-Cu-Al metallic glasses Acta Materialia. 132: 298-306. DOI: 10.1016/J.Actamat.2017.04.044 |
0.33 |
|
2017 |
Louzguine-Luzgin D, Zadorozhnyy VY, Ketov S, Wang Z, Tsarkov A, Greer A. On room-temperature quasi-elastic mechanical behaviour of bulk metallic glasses Acta Materialia. 129: 343-351. DOI: 10.1016/J.Actamat.2017.02.049 |
0.329 |
|
2016 |
Wang Z, Georgarakis K, Nakayama KS, Li Y, Tsarkov AA, Xie G, Dudina D, Louzguine-Luzgin DV, Yavari AR. Microstructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites. Scientific Reports. 6: 24384. PMID 27067824 DOI: 10.1038/Srep24384 |
0.453 |
|
2016 |
Zhao YL, Zhang Y, Luo Z, Wang Z, Zhang WW. Effect of Ultrasonic Vibration and Applied Pressure on the Microstructure and Mechanical Property of Al-5.0Cu-0.6Mn-0.6Fe Alloys Materials Science Forum. 850: 559-565. DOI: 10.4028/Www.Scientific.Net/Msf.850.559 |
0.383 |
|
2016 |
Chaubey A, Konda Gokuldoss P, Wang Z, Scudino S, Mukhopadhyay N, Eckert J. Effect of Particle Size on Microstructure and Mechanical Properties of Al-Based Composite Reinforced with 10 Vol.% Mechanically Alloyed Mg-7.4%Al Particles Technologies. 4: 37. DOI: 10.3390/Technologies4040037 |
0.642 |
|
2016 |
Wang Z, Ketov SV, Sun B, Chen C, Churyumov AY, Louzguine-Luzgin DV. Eutectic crystallization during fracture of Zr-Cu-Co-Al metallic glass Materials Science and Engineering A. 657: 210-214. DOI: 10.1016/J.Msea.2016.01.096 |
0.326 |
|
2016 |
Wang Z, Qu RT, Prashanth KG, Eckert J, Scudino S. Compression behavior of inter-particle regions in high-strength Al84Ni7Gd6Co3 alloy Materials Letters. 185: 25-28. DOI: 10.1016/J.Matlet.2016.08.090 |
0.605 |
|
2015 |
Luo Q, Garbarino G, Sun B, Fan D, Zhang Y, Wang Z, Sun Y, Jiao J, Li X, Li P, Mattern N, Eckert J, Shen J. Hierarchical densification and negative thermal expansion in Ce-based metallic glass under high pressure. Nature Communications. 6: 5703. PMID 25641091 DOI: 10.1038/Ncomms6703 |
0.321 |
|
2015 |
Wang Z, Qu RT, Scudino S, Sun BA, Prashanth KG, Louzguine-Luzgin DV, Chen MW, Zhang ZF, Eckert J. Hybrid nanostructured aluminum alloy with super-high strength Npg Asia Materials. 7: e229-e229. DOI: 10.1038/Am.2015.129 |
0.714 |
|
2015 |
Wang Z, Scudino S, Stoica M, Zhang W, Eckert J. Al-based matrix composites reinforced with short Fe-based metallic glassy fiber Journal of Alloys and Compounds. 651: 170-175. DOI: 10.1016/J.Jallcom.2015.08.098 |
0.705 |
|
2015 |
Inoue A, Wang Z, Louzguine-Luzgin DV, Han Y, Kong FL, Shalaan E, Al-Marzouki F. Effect of high-order multicomponent on formation and properties of Zr-based bulk glassy alloys Journal of Alloys and Compounds. 638: 198-203. DOI: 10.1016/J.Jallcom.2015.03.078 |
0.433 |
|
2015 |
Wang Z, Prashanth KG, Chaubey AK, Löber L, Schimansky FP, Pyczak F, Zhang WW, Scudino S, Eckert J. Tensile properties of Al-12Si matrix composites reinforced with Ti-Al-based particles Journal of Alloys and Compounds. 630: 256-259. DOI: 10.1016/J.Jallcom.2014.12.254 |
0.468 |
|
2014 |
Prashanth K, Debalina B, Wang Z, Gostin P, Gebert A, Calin M, Kühn U, Kamaraj M, Scudino S, Eckert J. Tribological and corrosion properties of Al–12Si produced by selective laser melting Journal of Materials Research. 29: 2044-2054. DOI: 10.1557/Jmr.2014.133 |
0.548 |
|
2014 |
Louzguine-Luzgin DV, Ketov SV, Wang Z, Miyama MJ, Tsarkov AA, Churyumov AY. Plastic deformation studies of Zr-based bulk metallic glassy samples with a low aspect ratio Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 616: 288-296. DOI: 10.1016/J.Msea.2014.08.006 |
0.322 |
|
2014 |
Wang Z, Tan J, Sun B, Scudino S, Prashanth K, Zhang W, Li Y, Eckert J. Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles Materials Science and Engineering: A. 600: 53-58. DOI: 10.1016/J.Msea.2014.02.003 |
0.67 |
|
2014 |
Prashanth KG, Scudino S, Klauss HJ, Surreddi KB, Löber L, Wang Z, Chaubey AK, Kühn U, Eckert J. Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment Materials Science and Engineering A. 590: 153-160. DOI: 10.1016/J.Msea.2013.10.023 |
0.629 |
|
2014 |
Prashanth K, Damodaram R, Scudino S, Wang Z, Prasad Rao K, Eckert J. Friction welding of Al–12Si parts produced by selective laser melting Materials & Design. 57: 632-637. DOI: 10.1016/J.Matdes.2014.01.026 |
0.623 |
|
2014 |
Markó D, Prashanth K, Scudino S, Wang Z, Ellendt N, Uhlenwinkel V, Eckert J. Al-based metal matrix composites reinforced with Fe49.9Co35.1Nb7.7B4.5Si2.8 glassy powder: Mechanical behavior under tensile loading Journal of Alloys and Compounds. 615: S382-S385. DOI: 10.1016/J.Jallcom.2013.10.215 |
0.722 |
|
2014 |
Wang Z, Prashanth KG, Scudino S, Chaubey AK, Sordelet DJ, Zhang WW, Li YY, Eckert J. Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles Journal of Alloys and Compounds. 586: S419-S422. DOI: 10.1016/J.Jallcom.2013.04.190 |
0.682 |
|
2014 |
Wang Z, Prashanth KG, Scudino S, He J, Zhang WW, Li YY, Stoica M, Vaughan G, Sordelet DJ, Eckert J. Effect of ball milling on structure and thermal stability of Al 84Gd6Ni7Co3 glassy powders Intermetallics. 46: 97-102. DOI: 10.1016/J.Intermet.2013.11.005 |
0.568 |
|
2014 |
Wang Z, Tan J, Scudino S, Sun BA, Qu RT, He J, Prashanth KG, Zhang WW, Li YY, Eckert J. Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glasses Advanced Powder Technology. 25: 635-639. DOI: 10.1016/J.Apt.2013.10.005 |
0.471 |
|
2013 |
Song K, Pauly S, Wang Z, Kühn U, Eckert J. Effect of TaW particles on the microstructure and mechanical properties of metastable Cu47.5Zr47.5Al5 alloys Materials Science and Engineering: A. 587: 372-380. DOI: 10.1016/J.Msea.2013.09.010 |
0.716 |
|
2013 |
He J, Mattern N, Tan J, Zhao JZ, Kaban I, Wang Z, Ratke L, Kim DH, Kim WT, Eckert J. A bridge from monotectic alloys to liquid-phase-separated bulk metallic glasses: Design, microstructure and phase evolution Acta Materialia. 61: 2102-2112. DOI: 10.1016/J.Actamat.2012.12.031 |
0.379 |
|
2012 |
Tan J, Pan F, Zhang Y, Wang Z, Stoica M, Sun B, Kühn U, Eckert J. Effect of Fe addition on glass forming ability and mechanical properties in Zr–Co–Al–(Fe) bulk metallic glasses Materials Science and Engineering: A. 539: 124-127. DOI: 10.1016/J.Msea.2012.01.068 |
0.668 |
|
Show low-probability matches. |