Year |
Citation |
Score |
2020 |
Rane R, Kulkarni A, Prajapati H, Taylor R, Jain A, Chen V. Post-Process Effects of Isothermal Annealing and Initially Applied Static Uniaxial Loading on the Ultimate Tensile Strength of Fused Filament Fabrication Parts. Materials (Basel, Switzerland). 13. PMID 31940919 DOI: 10.3390/Ma13020352 |
0.338 |
|
2020 |
Parhizi M, Pathak M, Jain A. Analytical Model Based Prediction of State-of-Charge (SoC) of a Lithium-Ion Cell under Time-Varying Charge/Discharge Currents Journal of the Electrochemical Society. 167: 120544. DOI: 10.1149/1945-7111/Abb34D |
0.303 |
|
2020 |
Dhakane A, Varshney V, Liu J, Heinz H, Jain A. Molecular Dynamics Simulations of Separator-Cathode Interfacial Thermal Transport in a Li-ion Cell Surfaces and Interfaces. 100674. DOI: 10.1016/J.Surfin.2020.100674 |
0.456 |
|
2020 |
Prajapati H, Salvi S, Ravoori D, Jain A. Measurement of the in-plane temperature field on the build plate during polymer extrusion additive manufacturing using infrared thermometry Polymer Testing. 106866. DOI: 10.1016/J.Polymertesting.2020.106866 |
0.397 |
|
2020 |
Mostafavi A, Parhizi M, Jain A. Semi-analytical thermal modeling of transverse and longitudinal fins in a cylindrical phase change energy storage system International Journal of Thermal Sciences. 153: 106352. DOI: 10.1016/J.Ijthermalsci.2020.106352 |
0.402 |
|
2020 |
Salvi SS, Jain A. Measurement of thermal conductivity of millimeter-sized wires using the fin effect Applied Thermal Engineering. 178: 115482. DOI: 10.1016/J.Applthermaleng.2020.115482 |
0.512 |
|
2019 |
Parhizi M, Jain A. Solution of the phase change Stefan problem with time-dependent heat flux using perturbation method Journal of Heat Transfer-Transactions of the Asme. 141: 24503. DOI: 10.1115/1.4041956 |
0.321 |
|
2019 |
Ravoori D, Lowery C, Prajapati H, Jain A. Experimental and theoretical investigation of heat transfer in platform bed during polymer extrusion based additive manufacturing Polymer Testing. 73: 439-446. DOI: 10.1016/J.Polymertesting.2018.11.025 |
0.496 |
|
2019 |
Mostafavi A, Parhizi M, Jain A. Theoretical modeling and optimization of fin-based enhancement of heat transfer into a phase change material International Journal of Heat and Mass Transfer. 145: 118698. DOI: 10.1016/J.Ijheatmasstransfer.2019.118698 |
0.463 |
|
2019 |
Parhizi M, Jain A. Theoretical modeling of a phase change heat transfer problem with a pre-melted or pre-solidified region International Journal of Heat and Mass Transfer. 136: 635-643. DOI: 10.1016/J.Ijheatmasstransfer.2019.02.079 |
0.394 |
|
2019 |
Parhizi M, Jain A. The impact of thermal properties on performance of phase change based energy storage systems Applied Thermal Engineering. 162: 114154. DOI: 10.1016/J.Applthermaleng.2019.114154 |
0.409 |
|
2019 |
Parhizi M, Jain A. Analytical modeling and optimization of phase change thermal management of a Li-ion battery pack Applied Thermal Engineering. 148: 229-237. DOI: 10.1016/J.Applthermaleng.2018.11.017 |
0.45 |
|
2019 |
Ravoori D, Prajapati H, Talluru V, Adnan A, Jain A. Nozzle-integrated pre-deposition and post-deposition heating of previously deposited layers in polymer extrusion based additive manufacturing Additive Manufacturing. 28: 719-726. DOI: 10.1016/J.Addma.2019.06.006 |
0.5 |
|
2019 |
Prajapati H, Chalise D, Ravoori D, Taylor RM, Jain A. Improvement in build-direction thermal conductivity in extrusion-based polymer additive manufacturing through thermal annealing Additive Manufacturing. 26: 242-249. DOI: 10.1016/J.Addma.2019.01.004 |
0.497 |
|
2019 |
Shah K, Jain A. Prediction of thermal runaway and thermal management requirements in cylindrical Li‐ion cells in realistic scenarios International Journal of Energy Research. 43: 1827-1838. DOI: 10.1002/Er.4411 |
0.445 |
|
2019 |
Prasad A, Parhizi M, Jain A. Experimental and numerical investigation of heat transfer in Li‐ion battery pack of a hoverboard International Journal of Energy Research. 43: 1802-1814. DOI: 10.1002/Er.4404 |
0.384 |
|
2018 |
Ahmed MB, Shaik S, Jain A. Measurement of radial thermal conductivity of a cylinder using a time-varying heat flux method International Journal of Thermal Sciences. 129: 301-308. DOI: 10.1016/J.Ijthermalsci.2018.03.008 |
0.542 |
|
2018 |
Esho I, Shah K, Jain A. Measurements and modeling to determine the critical temperature for preventing thermal runaway in Li-ion cells Applied Thermal Engineering. 145: 287-294. DOI: 10.1016/J.Applthermaleng.2018.09.016 |
0.557 |
|
2018 |
Prajapati H, Ravoori D, Jain A. Measurement and modeling of filament temperature distribution in the standoff gap between nozzle and bed in polymer-based additive manufacturing Additive Manufacturing. 24: 224-231. DOI: 10.1016/J.Addma.2018.09.030 |
0.494 |
|
2018 |
Ravoori D, Alba L, Prajapati H, Jain A. Investigation of process-structure-property relationships in polymer extrusion based additive manufacturing through in situ high speed imaging and thermal conductivity measurements Additive Manufacturing. 23: 132-139. DOI: 10.1016/J.Addma.2018.07.011 |
0.437 |
|
2018 |
Prajapati H, Ravoori D, Woods RL, Jain A. Measurement of anisotropic thermal conductivity and inter-layer thermal contact resistance in polymer fused deposition modeling (FDM) Additive Manufacturing. 21: 84-90. DOI: 10.1016/J.Addma.2018.02.019 |
0.491 |
|
2017 |
Anthony D, Wong D, Wetz D, Jain A. Improved Thermal Performance of a Li-Ion Cell through Heat Pipe Insertion Journal of the Electrochemical Society. 164. DOI: 10.1149/2.0191706Jes |
0.466 |
|
2017 |
Choobineh L, Jones J, Jain A. Experimental and Numerical Investigation of Interdie Thermal Resistance in Three-Dimensional Integrated Circuits Journal of Electronic Packaging. 139: 20908. DOI: 10.1115/1.4036404 |
0.364 |
|
2017 |
Ostanek J, Shah K, Jain A. Measurement sensitivity analysis of the transient hot source technique applied to flat and cylindrical samples Journal of Thermal Science and Engineering Applications. 9. DOI: 10.1115/1.4034178 |
0.352 |
|
2017 |
Parhizi M, Ahmed MB, Jain A. Determination of the core temperature of a Li-ion cell during thermal runaway Journal of Power Sources. 370: 27-35. DOI: 10.1016/J.Jpowsour.2017.09.086 |
0.526 |
|
2017 |
Vishwakarma V, Jain A. Enhancement of thermal transport in Gel Polymer Electrolytes with embedded BN/Al 2 O 3 nano- and micro-particles Journal of Power Sources. 362: 219-227. DOI: 10.1016/J.Jpowsour.2017.07.035 |
0.484 |
|
2017 |
Chalise D, Shah K, Halama T, Komsiyska L, Jain A. An experimentally validated method for temperature prediction during cyclic operation of a Li-ion cell International Journal of Heat and Mass Transfer. 112: 89-96. DOI: 10.1016/J.Ijheatmasstransfer.2017.04.115 |
0.449 |
|
2017 |
Anthony D, Wong D, Wetz D, Jain A. Non-invasive measurement of internal temperature of a cylindrical Li-ion cell during high-rate discharge International Journal of Heat and Mass Transfer. 111: 223-231. DOI: 10.1016/J.Ijheatmasstransfer.2017.03.095 |
0.4 |
|
2017 |
Luhar S, Sarkar D, Jain A. Steady state and transient analytical modeling of non-uniform convective cooling of a microprocessor chip due to jet impingement International Journal of Heat and Mass Transfer. 110: 768-777. DOI: 10.1016/J.Ijheatmasstransfer.2017.03.064 |
0.488 |
|
2016 |
Anthony D, Sarkar D, Jain A. Non-invasive, transient determination of the core temperature of a heat-generating solid body. Scientific Reports. 6: 35886. PMID 27804981 DOI: 10.1038/Srep35886 |
0.451 |
|
2016 |
Shah K, Vishwakarma V, Jain A. Measurement of Multiscale Thermal Transport Phenomena in Li-Ion Cells: A Review Journal of Electrochemical Energy Conversion and Storage. 13. DOI: 10.1115/1.4034413 |
0.37 |
|
2016 |
Shah K, Chalise D, Jain A. Experimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells Journal of Power Sources. 330: 167-174. DOI: 10.1016/J.Jpowsour.2016.08.133 |
0.545 |
|
2016 |
Sarkar D, Jain A, Goldstein RJ, Srinivasan V. Corrections for lateral conduction error in steady state heat transfer measurements International Journal of Thermal Sciences. 109: 413-423. DOI: 10.1016/J.Ijthermalsci.2016.05.031 |
0.416 |
|
2016 |
Anthony D, Sarkar D, Jain A. Contactless, non-intrusive core temperature measurement of a solid body in steady-state International Journal of Heat and Mass Transfer. 101: 779-788. DOI: 10.1016/J.Ijheatmasstransfer.2016.05.073 |
0.463 |
|
2016 |
Sarkar D, Haji-Sheikh A, Jain A. Thermal conduction in an orthotropic sphere with circumferentially varying convection heat transfer International Journal of Heat and Mass Transfer. 96: 406-412. DOI: 10.1016/J.Ijheatmasstransfer.2016.01.027 |
0.489 |
|
2016 |
Shah K, McKee C, Chalise D, Jain A. Experimental and numerical investigation of core cooling of Li-ion cells using heat pipes Energy. 113: 852-860. DOI: 10.1016/J.Energy.2016.07.076 |
0.48 |
|
2015 |
Vishwakarma V, Waghela C, Jain A. Measurement of out-of-plane thermal conductivity of substrates for flexible electronics and displays Microelectronic Engineering. 142: 36-39. DOI: 10.1016/J.Mee.2015.06.008 |
0.485 |
|
2015 |
Vishwakarma V, Waghela C, Wei Z, Prasher R, Nagpure SC, Li J, Liu F, Daniel C, Jain A. Heat transfer enhancement in a lithium-ion cell through improved material-level thermal transport Journal of Power Sources. 300: 123-131. DOI: 10.1016/J.Jpowsour.2015.09.028 |
0.512 |
|
2015 |
Drake SJ, Martin M, Wetz DA, Ostanek JK, Miller SP, Heinzel JM, Jain A. Heat generation rate measurement in a Li-ion cell at large C-rates through temperature and heat flux measurements Journal of Power Sources. 285: 266-273. DOI: 10.1016/J.Jpowsour.2015.03.008 |
0.472 |
|
2015 |
Choobineh L, Jain A. An explicit analytical model for rapid computation of temperature field in a three-dimensional integrated circuit (3D IC) International Journal of Thermal Sciences. 87: 103-109. DOI: 10.1016/J.Ijthermalsci.2014.08.012 |
0.388 |
|
2015 |
Sarkar D, Haji-Sheikh A, Jain A. Temperature distribution in multi-layer skin tissue in presence of a tumor International Journal of Heat and Mass Transfer. 91: 602-610. DOI: 10.1016/J.Ijheatmasstransfer.2015.07.089 |
0.404 |
|
2015 |
Shah K, Jain A. An iterative, analytical method for solving conjugate heat transfer problems International Journal of Heat and Mass Transfer. 90: 1232-1240. DOI: 10.1016/J.Ijheatmasstransfer.2015.07.056 |
0.402 |
|
2015 |
Shah K, Jain A. Modeling of steady-state and transient thermal performance of a Li-ion cell with an axial fluidic channel for cooling International Journal of Energy Research. 39: 573-584. DOI: 10.1002/Er.3274 |
0.486 |
|
2014 |
Mirza F, Naware G, Jain A, Agonafer D. Effect of through-silicon-via joule heating on device performance for low-powered mobile applications Journal of Electronic Packaging, Transactions of the Asme. 136. DOI: 10.1115/1.4028076 |
0.376 |
|
2014 |
Vishwakarma V, Jain A. Measurement of in-plane thermal conductivity and heat capacity of separator in Li-ion cells using a transient DC heating method Journal of Power Sources. 272: 378-385. DOI: 10.1016/J.Jpowsour.2014.08.066 |
0.561 |
|
2014 |
Shah K, Drake SJ, Wetz DA, Ostanek JK, Miller SP, Heinzel JM, Jain A. An experimentally validated transient thermal model for cylindrical Li-ion cells Journal of Power Sources. 271: 262-268. DOI: 10.1016/J.Jpowsour.2014.07.118 |
0.5 |
|
2014 |
Shah K, Drake SJ, Wetz DA, Ostanek JK, Miller SP, Heinzel JM, Jain A. Modeling of steady-state convective cooling of cylindrical Li-ion cells Journal of Power Sources. 258: 374-381. DOI: 10.1016/J.Jpowsour.2014.01.115 |
0.518 |
|
2014 |
Drake SJ, Wetz DA, Ostanek JK, Miller SP, Heinzel JM, Jain A. Measurement of anisotropic thermophysical properties of cylindrical Li-ion cells Journal of Power Sources. 252: 298-304. DOI: 10.1016/J.Jpowsour.2013.11.107 |
0.504 |
|
2014 |
Sarkar D, Shah K, Haji-Sheikh A, Jain A. Analytical modeling of temperature distribution in an anisotropic cylinder with circumferentially-varying convective heat transfer International Journal of Heat and Mass Transfer. 79: 1027-1033. DOI: 10.1016/J.Ijheatmasstransfer.2014.08.060 |
0.494 |
|
2013 |
Patel BC, Jain A. Thermal modeling of ultraviolet nanoimprint lithography Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4025564 |
0.47 |
|
2013 |
Banait A, Vishwakarma V, Choobineh L, Jain A. Thermally assisted spatially directed pore formation in poly-dimethylsiloxane (PDMS) Applied Physics Letters. 103. DOI: 10.1063/1.4824444 |
0.329 |
|
2013 |
Choobineh L, Jain A. Determination of temperature distribution in three-dimensional integrated circuits (3D ICs) with unequally-sized die Applied Thermal Engineering. 56: 176-184. DOI: 10.1016/J.Applthermaleng.2013.03.006 |
0.43 |
|
2012 |
Choobineh L, Jain A. Analytical solution for steady-state and transient temperature fields in vertically stacked 3-D integrated circuits Ieee Transactions On Components, Packaging and Manufacturing Technology. 2: 2031-2039. DOI: 10.1109/Tcpmt.2012.2213820 |
0.398 |
|
2012 |
Javed A, Iqbal SM, Jain A. Microheater platform for selective detachment of DNA Applied Physics Letters. 101. DOI: 10.1063/1.4748308 |
0.367 |
|
2011 |
Jain A, Alam SM, Pozder S, Jones RE. Thermal-electrical co-optimisation of floorplanning of three-dimensional integrated circuits under manufacturing and physical design constraints Iet Computers and Digital Techniques. 5: 169-178. DOI: 10.1049/Iet-Cdt.2009.0107 |
0.414 |
|
2011 |
Jain A, Goodson KE. Thermal microdevices for biological and biomedical applications Journal of Thermal Biology. 36: 209-218. DOI: 10.1016/J.Jtherbio.2011.02.006 |
0.605 |
|
2010 |
Jain A, Jones RE, Chatterjee R, Pozder S. Analytical and numerical modeling of the thermal performance of three-dimensional integrated circuits Ieee Transactions On Components and Packaging Technologies. 33: 56-63. DOI: 10.1109/Tcapt.2009.2020916 |
0.479 |
|
2009 |
Kodama T, Jain A, Goodson KE. Heat conduction through a DNA-gold composite. Nano Letters. 9: 2005-9. PMID 19435380 DOI: 10.1021/Nl900272M |
0.577 |
|
2009 |
Jain A, Ness K, Goodson KE. Theoretical and experimental investigation of spatial temperature gradient effects on cells using a microfabricated microheater platform Sensors and Actuators, B: Chemical. 143: 286-294. DOI: 10.1016/J.Snb.2009.08.035 |
0.722 |
|
2008 |
Jain A, Goodson KE. Measurement of the thermal conductivity and heat capacity of freestanding shape memory thin films using the 3ω method Journal of Heat Transfer. 130. DOI: 10.1115/1.2945904 |
0.6 |
|
2008 |
Hu XJ, Jain A, Goodson KE. Investigation of the natural convection boundary condition in microfabricated structures International Journal of Thermal Sciences. 47: 820-824. DOI: 10.1016/J.Ijthermalsci.2007.07.011 |
0.573 |
|
2008 |
Oh DW, Jain A, Eaton JK, Goodson KE, Lee JS. Thermal conductivity measurement and sedimentation detection of aluminum oxide nanofluids by using the 3ω method International Journal of Heat and Fluid Flow. 29: 1456-1461. DOI: 10.1016/J.Ijheatfluidflow.2008.04.007 |
0.627 |
|
Show low-probability matches. |