| Year |
Citation |
Score |
| 2023 |
Chen T, Zhang Q, Liu F, Feng X, Xu C, Song Z. Influences of Cold Rolling and Aging on Microstructure and Property of CuCrSn Alloy. Materials (Basel, Switzerland). 16. PMID 37241406 DOI: 10.3390/ma16103780 |
0.39 |
|
| 2023 |
Ding F, Zhang Y, Zhu X, Guo P, Yang L, Zhang Q, Xu C, Sun W, Song Z. Strengthening Mechanism of Rotary-Forged Deformable Biodegradable Zn-0.45Li Alloys. Materials (Basel, Switzerland). 16. PMID 37109837 DOI: 10.3390/ma16083003 |
0.53 |
|
| 2020 |
Yin J, Wu S, Song Z, Xu C, Cui Q. Critical assessment of CuZn39Pb2 processing maps International Journal of Materials Research. 111: 439-448. DOI: 10.3139/146.111898 |
0.333 |
|
| 2020 |
Yang Y, Fan L, Xu C, Dong X. Experimental Study of Mechanical Properties of 30SiMn2MoVA Steel Gun Barrel Processed by Cold Radial Forging Journal of Pressure Vessel Technology. 143. DOI: 10.1115/1.4047654 |
0.304 |
|
| 2020 |
Lin Y, Zhu Q, Zheng B, Hu F, Yang L, Song Z, Xu C, Li Z. Effect of titanium addition on structure, corrosion resistance and mechanical properties of aluminum coatings on NdFeB by ion-beam-assisted magnetron sputtering Vacuum. 181: 109642. DOI: 10.1016/J.Vacuum.2020.109642 |
0.34 |
|
| 2020 |
Yang Y, Fan L, Xu C. The microstructure, texture evolution and plasticity anisotropy of 30SiMn2MoVA high strength alloy steel tube processed by cold radial forging Materials Characterization. 169: 110641. DOI: 10.1016/J.MATCHAR.2020.110641 |
0.399 |
|
| 2020 |
Zhu Q, Lin Y, Ma Z, Li W, Song Z, Zheng B, Xu C, Yang L, Li H. Coercivity enhancement of sintered Ce-substituted Nd-Fe-B magnets by grain boundary diffusion process of Tb Journal of Magnetism and Magnetic Materials. 515: 167274. DOI: 10.1016/J.Jmmm.2020.167274 |
0.303 |
|
| 2020 |
Zheng Z, Guo P, Li J, Yang T, Song Z, Xu C, Zhou M. Effect of cold rolling on microstructure and mechanical properties of a Cu–Zn–Sn–Ni–Co–Si alloy for interconnecting devices Journal of Alloys and Compounds. 831: 154842. DOI: 10.1016/J.Jallcom.2020.154842 |
0.481 |
|
| 2020 |
Guo P, Bagheri R, Ren T, Yang L, Xu C, Lin J, Liu H, Sun W, Song Z. Corrosion characteristics of zinc–zirconium alloy in c‐SBF and its biocompatibility in vitro/in vivo Materials and Corrosion-Werkstoffe Und Korrosion. 71: 196-208. DOI: 10.1002/Maco.201911137 |
0.416 |
|
| 2019 |
Yang L, Guo P, Niu Z, Li F, Song Z, Xu C, Liu H, Sun W, Ren T. Influence of Mg on the mechanical properties and degradation performance of as-extruded ZnMgCa alloys: In vitro and in vivo behavior. Journal of the Mechanical Behavior of Biomedical Materials. 95: 220-231. PMID 31022667 DOI: 10.1016/J.Jmbbm.2019.04.029 |
0.437 |
|
| 2019 |
Li W, Zhang Q, Zhu Q, Xiao S, Xu C, Yang L, Zheng B, Mao S, Song Z. Formation of anti-shell/core structure of heavy rare earth elements (Tb, Dy) in sintered Nd-Fe-B magnet after grain boundary diffusion process Scripta Materialia. 163: 40-43. DOI: 10.1016/J.Scriptamat.2018.12.034 |
0.339 |
|
| 2019 |
Zhu Y, Tang H, Li Z, Xu C, He B. Solidification behavior and grain morphology of laser additive manufacturing titanium alloys Journal of Alloys and Compounds. 777: 712-716. DOI: 10.1016/J.JALLCOM.2018.11.055 |
0.325 |
|
| 2019 |
Ren T, Gao X, Xu C, Yang L, Guo P, Liu H, Chen Y, Sun W, Song Z. Evaluation of as‐extruded ternary Zn–Mg–Zr alloys for biomedical implantation material: In vitro and in vivo behavior Materials and Corrosion-Werkstoffe Und Korrosion. 70: 1056-1070. DOI: 10.1002/Maco.201810648 |
0.357 |
|
| 2018 |
Sun Z, Moradi M, Chen Y, Bagheri R, Guo P, Yang L, Song Z, Xu C. Simulation of the marine environment using bioreactor for investigation of 2507 duplex stainless steel corrosion in the presence of marine isolated Bacillus Vietnamensis bacterium Materials Chemistry and Physics. 208: 149-156. DOI: 10.1016/J.Matchemphys.2018.01.047 |
0.311 |
|
| 2018 |
Khan MA, Xu C, Song Z, Raza R, Ahmad MA, Abbas G, Zhu B. Synthesize and characterization of ceria based nano-composite materials for low temperature solid oxide fuel cell International Journal of Hydrogen Energy. 43: 6310-6317. DOI: 10.1016/J.Ijhydene.2018.01.166 |
0.349 |
|
| 2018 |
Yu C, Qi Z, Yu H, Xu C, Xiao H. Microstructural and Mechanical Properties of Hot Roll Bonded Titanium Alloy/Low Carbon Steel Plate Journal of Materials Engineering and Performance. 27: 1664-1672. DOI: 10.1007/s11665-018-3279-9 |
0.308 |
|
| 2017 |
Cao Z, Ding X, Bagheri R, Wattoo AG, Xu C, Yang L, Song L, Wen Y, Song Z. The deposition, microstructure and properties of Al protective coatings for NdFeB magnets by multi-arc ion plating Vacuum. 142: 37-44. DOI: 10.1016/J.Vacuum.2017.05.003 |
0.346 |
|
| 2014 |
Xu C, Langdon TG. Development of Homogeneity in an Al-6061 Alloy Processed by ECAP and ECAP-Conform Materials Science Forum. 294-299. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.294 |
0.663 |
|
| 2012 |
Wen H, Zhao Y, Topping TD, Ashford D, Figueiredo RB, Xu C, Langdon TG, Lavernia EJ. Influence of pressing temperature on microstructure evolution and mechanical behavior of ultrafine-grained cu processed by equal-channel angular pressing Advanced Engineering Materials. 14: 185-194. DOI: 10.1002/Adem.201100080 |
0.72 |
|
| 2011 |
Kawasaki M, Alhajeri SN, Xu C, Langdon TG. The development of hardness homogeneity in pure aluminum and aluminum alloy disks processed by high-pressure torsion Materials Science and Engineering A. 529: 345-351. DOI: 10.1016/J.Msea.2011.09.039 |
0.723 |
|
| 2011 |
Xu C, Horita Z, Langdon TG. Microstructural evolution in an aluminum solid solution alloy processed by ECAP Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 6059-6065. DOI: 10.1016/J.Msea.2011.04.017 |
0.689 |
|
| 2010 |
Xu C, Horita Z, Langdon TG. Mechanical properties of Al-6061 and an Al-6061 metal matrix composite processed by high-pressure torsion Materials Science Forum. 689-694. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.689 |
0.642 |
|
| 2010 |
Li Y, Zhao YH, Liu W, Xu C, Horita Z, Liao XZ, Zhu YT, Langdon TG, Lavernia EJ. Influence of grain size on the density of deformation twins in Cu–30%Zn alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 3942-3948. DOI: 10.1016/J.Msea.2010.02.076 |
0.627 |
|
| 2010 |
Venkateswarlu K, Rajinikanth V, Ray AK, Xu C, Langdon TG. The characteristics of aluminum–scandium alloys processed by ECAP Materials Science and Engineering: A. 527: 1448-1452. DOI: 10.1016/J.Msea.2009.10.047 |
0.695 |
|
| 2010 |
Li TS, Wang WG, Miao H, Chen T, Xu C. Effect of reduction temperature on the electrochemical properties of a Ni/YSZ anode-supported solid oxide fuel cell Journal of Alloys and Compounds. 495: 138-143. DOI: 10.1016/J.Jallcom.2010.01.103 |
0.325 |
|
| 2010 |
Xu C, Schroeder S, Berbon PB, Langdon TG. Principles of ECAP–Conform as a continuous process for achieving grain refinement: Application to an aluminum alloy Acta Materialia. 58: 1379-1386. DOI: 10.1016/J.Actamat.2009.10.044 |
0.707 |
|
| 2010 |
Duan ZC, Chinh NQ, Xu C, Langdon TG. developing processing routes for the equal-channel angular pressing of age-hardenable aluminum alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 41: 802-809. DOI: 10.1007/S11661-009-0020-1 |
0.664 |
|
| 2009 |
Gubicza J, Chinh NQ, Lábár JL, Tichy G, Hegedüs Z, Xu C, Langdon TG. Stability of microstructure in silver processed by severe plastic deformation International Journal of Materials Research. 100: 884-887. DOI: 10.3139/146.110113 |
0.58 |
|
| 2009 |
Xu C, Kawasaki M, Langdon TG. The high-temperature creep properties of materials processed using severe plastic deformation International Journal of Materials Research. 100: 750-756. DOI: 10.3139/146.110093 |
0.742 |
|
| 2009 |
Xu C, Xia K, Langdon TG. Processing of a magnesium alloy by equal-channel angular pressing using a back-pressure Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 205-211. DOI: 10.1016/J.Msea.2009.07.063 |
0.677 |
|
| 2009 |
Chinh NQ, Gubicza J, Czeppe T, Lendvai J, Xu C, Valiev RZ, Langdon TG. Developing a strategy for the processing of age-hardenable alloys by ECAP at room temperature Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 516: 248-252. DOI: 10.1016/J.Msea.2009.03.049 |
0.623 |
|
| 2009 |
Xu C, Dobatkin SV, Horita Z, Langdon TG. Superplastic flow in a nanostructured aluminum alloy produced using high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 500: 170-175. DOI: 10.1016/J.Msea.2008.09.049 |
0.687 |
|
| 2009 |
Xu C, Langdon TG. Three-dimensional representations of hardness distributions after processing by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 503: 71-74. DOI: 10.1016/J.Msea.2008.04.083 |
0.624 |
|
| 2009 |
Kumar P, Xu C, Langdon TG. Influence of strain rate on strength and ductility in an aluminum alloy processed by equal-channel angular pressing Journal of Materials Science. 44: 3913-3916. DOI: 10.1007/S10853-009-3535-3 |
0.649 |
|
| 2008 |
Zhai H, Guan W, Li Z, Xu C, Wang WG. Research on Performance of LSM Coating on Interconnect Materials for SOFCs Journal of the Korean Ceramic Society. 45: 777-781. DOI: 10.4191/Kcers.2008.45.1.777 |
0.302 |
|
| 2008 |
Chinh NQ, Gubicza J, Czeppe T, Lendvai J, Hegedűs Z, Xu C, Langdon TG. Effect of pre-aging on the microstructure and strength of supersaturated AlZnMg alloys processed by ECAP Materials Science Forum. 501-506. DOI: 10.4028/Www.Scientific.Net/Msf.584-586.501 |
0.637 |
|
| 2008 |
Xu C, Zhilyaev AP, Horita Z, Langdon TG. Factors Influencing the Development of Homogeneity in Disks Processed by High-Pressure Torsion Materials Science Forum. 3-8. DOI: 10.4028/Www.Scientific.Net/Msf.584-586.3 |
0.529 |
|
| 2008 |
Xu C, Kawasaki M, Figueiredo RB, Duan ZC, Langdon TG. Superplastic Behavior in Ultrafine-Grained Materials Produced by Equal-Channel Angular Pressing Materials Science Forum. 579: 29-40. DOI: 10.4028/Www.Scientific.Net/Msf.579.29 |
0.818 |
|
| 2008 |
ZHAO Y, GUO Y, WEI Q, DANGELEWICZ A, XU C, ZHU Y, LANGDON T, ZHOU Y, LAVERNIA E. Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu Scripta Materialia. 59: 627-630. DOI: 10.1016/J.Scriptamat.2008.05.031 |
0.551 |
|
| 2008 |
Gubicza J, Chinh NQ, Lábár J, Hegedűs Z, Xu C, Langdon TG. Microstructure and yield strength of severely deformed silver Scripta Materialia. 58: 775-778. DOI: 10.1016/J.Scriptamat.2007.12.028 |
0.543 |
|
| 2008 |
Xu C, Száraz Z, Trojanová Z, Lukáč P, Langdon TG. Evaluating plastic anisotropy in two aluminum alloys processed by equal-channel angular pressing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 497: 206-211. DOI: 10.1016/J.Msea.2008.06.045 |
0.689 |
|
| 2008 |
Prell M, Xu C, Langdon TG. The evolution of homogeneity on longitudinal sections during processing by ECAP Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 480: 449-455. DOI: 10.1016/J.Msea.2007.08.011 |
0.616 |
|
| 2008 |
Venkateswarlu K, Ghosh M, Ray A, Xu C, Langdon TG. On the feasibility of using a continuous processing technique incorporating a limited strain imposed by ECAP Materials Science and Engineering: A. 485: 476-480. DOI: 10.1016/J.Msea.2007.08.007 |
0.626 |
|
| 2008 |
Figueiredo RB, Kawasaki M, Xu C, Langdon TG. Achieving superplastic behavior in fcc and hcp metals processed by equal-channel angular pressing Materials Science and Engineering A. 493: 104-110. DOI: 10.1016/J.Msea.2007.06.090 |
0.816 |
|
| 2008 |
Chowdhury SG, Xu C, Langdon TG. Texture evolution in an aluminum alloy processed by ECAP with concurrent precipitate fragmentation Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 473: 219-225. DOI: 10.1016/J.Msea.2007.05.052 |
0.667 |
|
| 2008 |
Xu C, Horita Z, Langdon TG. The evolution of homogeneity in an aluminum alloy processed using high-pressure torsion Acta Materialia. 56: 5168-5176. DOI: 10.1016/J.Actamat.2008.06.036 |
0.579 |
|
| 2008 |
Wang SC, Starink MJ, Gao N, Qiao XG, Xu C, Langdon TG. Texture evolution by shear on two planes during ECAP of a high-strength aluminum alloy Acta Materialia. 56: 3800-3809. DOI: 10.1016/J.Actamat.2008.04.022 |
0.58 |
|
| 2008 |
Balogh L, Ungár T, Zhao Y, Zhu YT, Horita Z, Xu C, Langdon TG. Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper-zinc alloys Acta Materialia. 56: 809-820. DOI: 10.1016/J.Actamat.2007.10.053 |
0.637 |
|
| 2008 |
Xu C, Horita Z, Langdon TG. Evaluating the influence of pressure and torsional strain on processing by high-pressure torsion Journal of Materials Science. 43: 7286-7292. DOI: 10.1007/S10853-008-2624-Z |
0.509 |
|
| 2007 |
Xu C, Horita Z, Langdon TG. The Processing of Ultrafine-Grained Materials Using High-Pressure Torsion Materials Science Forum. 1283-1294. DOI: 10.4028/Www.Scientific.Net/Msf.558-559.1283 |
0.645 |
|
| 2007 |
Xu C, Kawasaki M, Furukawa M, Horita Z, Langdon TG. Mechanical Properties of a Spray-Cast Aluminum Alloy Processed by Severe Plastic Deformation Materials Science Forum. 141-148. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.141 |
0.761 |
|
| 2007 |
Kawasaki M, Xu C, Horita Z, Langdon TG. Extending Creep and Superplasticity to Materials with Submicrometer Grain Sizes Key Engineering Materials. 539-544. DOI: 10.4028/Www.Scientific.Net/Kem.345-346.539 |
0.738 |
|
| 2007 |
Ungár T, Balogh L, Zhu YT, Horita Z, Xu C, Langdon TG. Using X-ray microdiffraction to determine grain sizes at selected positions in disks processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 444: 153-156. DOI: 10.1016/J.Msea.2006.08.059 |
0.596 |
|
| 2007 |
Xu C, Xia K, Langdon TG. The role of back pressure in the processing of pure aluminum by equal-channel angular pressing Acta Materialia. 55: 2351-2360. DOI: 10.1016/J.Actamat.2006.11.036 |
0.539 |
|
| 2007 |
Xu C, Horita Z, Langdon TG. The evolution of homogeneity in processing by high-pressure torsion Acta Materialia. 55: 203-212. DOI: 10.1016/J.Actamat.2006.07.029 |
0.52 |
|
| 2007 |
Kawasaki M, Figueiredo RB, Xu C, Langdon TG. Developing superplastic ductilities in ultrafine-grained metals Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 1891-1898. DOI: 10.1007/S11661-006-9000-X |
0.81 |
|
| 2007 |
Xu C, Langdon TG. The development of hardness homogeneity in aluminum and an aluminum alloy processed by ECAP Journal of Materials Science. 42: 1542-1550. DOI: 10.1007/S10853-006-0899-5 |
0.653 |
|
| 2006 |
Starink MJ, Wang SC, Gao N, Ubhi HS, Xu C, Langdon TG. An EBSD Study of Texture and Grain Boundary Evolution in a Strongly Textured Aluminium Alloy during ECA Pressing Materials Science Forum. 937-942. DOI: 10.4028/Www.Scientific.Net/Msf.503-504.937 |
0.669 |
|
| 2006 |
Kawasaki M, Xu C, Langdon TG. An investigation of cavitation in the tensile testing of a spray-cast aluminum alloy processed by ECAP Materials Science Forum. 83-90. DOI: 10.4028/Www.Scientific.Net/Msf.503-504.83 |
0.766 |
|
| 2006 |
Xu C, Langdon TG. Creep and mechanical properties of a commercial aluminum alloy processed by ECAP Materials Science Forum. 77-82. DOI: 10.4028/Www.Scientific.Net/Msf.503-504.77 |
0.659 |
|
| 2006 |
Gao N, Starink MJ, Furukawa M, Horita Z, Xu C, Langdon TG. Evolution of microstructure and precipitation in heat-treatable aluminium alloys during ECA pressing and subsequent heat treatment Materials Science Forum. 275-280. DOI: 10.4028/Www.Scientific.Net/Msf.503-504.275 |
0.639 |
|
| 2006 |
Xu C, Furukawa M, Horita Z, Langdon TG. Developing a Model for Grain Refinement in Equal-Channel Angular Pressing Materials Science Forum. 19-24. DOI: 10.4028/Www.Scientific.Net/Msf.503-504.19 |
0.677 |
|
| 2006 |
光明 古, Xu C, 哲夫 曾, 誠 井, 博 穴, Langdon TG. ECAP加工を施したMg-8 mass%Li 2相合金の超塑性 Journal of the Japan Institute of Metals. 70: 729-734. DOI: 10.2320/Jinstmet.70.729 |
0.48 |
|
| 2006 |
Kumar P, Xu C, Langdon TG. Mechanical characteristics of a Zn–22% Al alloy processed to very high strains by ECAP Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 429: 324-328. DOI: 10.1016/J.Msea.2006.05.044 |
0.632 |
|
| 2006 |
Venkateswarlu K, Das G, Pramanik AK, Xu C, Langdon TG. Using ball-indentation to evaluate the properties of an ultrafine-grained Al-2% Si alloy processed by ECAP Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 427: 188-194. DOI: 10.1016/J.Msea.2006.04.053 |
0.676 |
|
| 2006 |
Höppel HW, Kautz M, Xu C, Murashkin M, Langdon TG, Valiev RZ, Mughrabi H. An overview: Fatigue behaviour of ultrafine-grained metals and alloys International Journal of Fatigue. 28: 1001-1010. DOI: 10.1016/J.Ijfatigue.2005.08.014 |
0.621 |
|
| 2005 |
Xu C, Furukawa M, Horita Z, Langdon TG. Developing a Superplastic Forming Capability in Nanometals Solid State Phenomena. 23-30. DOI: 10.4028/Www.Scientific.Net/Ssp.101-102.23 |
0.725 |
|
| 2005 |
Xu C, Furukawa M, Horita Z, Langdon TG. Developing high strain rate superplasticity in aluminum alloys Materials Science Forum. 2949-2954. DOI: 10.4028/Www.Scientific.Net/Msf.475-479.2949 |
0.693 |
|
| 2005 |
Stoica GM, Fielden DE, McDaniels R, Liu Y, Huang B, Liaw PK, Xu C, Langdon TG. An analysis of the shear zone for metals deformed by equal-channel angular processing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 410: 239-242. DOI: 10.1016/J.Msea.2005.08.186 |
0.574 |
|
| 2005 |
Furui M, Xu C, Aida T, Inoue M, Anada H, Langdon TG. Improving the superplastic properties of a two-phase Mg–8% Li alloy through processing by ECAP Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 410: 439-442. DOI: 10.1016/J.Msea.2005.08.143 |
0.68 |
|
| 2005 |
Chen LJ, Ma CY, Stoica GM, Liaw PK, Xu C, Langdon TG. Mechanical behavior of a 6061 Al alloy and an Al2O3/6061 Al composite after equal-channel angular processing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 410: 472-475. DOI: 10.1016/J.Msea.2005.08.117 |
0.629 |
|
| 2005 |
Wang JT, Xu C, Du ZZ, Qu GZ, Langdon TG. Microstructure and properties of a low-carbon steel processed by equal-channel angular pressing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 410: 312-315. DOI: 10.1016/J.Msea.2005.08.111 |
0.646 |
|
| 2005 |
Gao N, Starink MJ, Furukawa M, Horita Z, Xu C, Langdon TG. Microstructural evolution in a spray-cast aluminum alloy during equal-channel angular pressing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 410: 303-307. DOI: 10.1016/J.Msea.2005.08.075 |
0.679 |
|
| 2005 |
Kawasaki M, Huang Y, Xu C, Furukawa M, Horita Z, Langdon TG. A quantitative study of cavity development in the tensile testing of an aluminum metal matrix composite processed by equal-channel angular pressing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 410: 402-407. DOI: 10.1016/J.Msea.2005.08.073 |
0.707 |
|
| 2005 |
Xu C, Langdon TG. Creep and superplasticity in a spray-cast aluminum alloy processed by ECA pressing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 410: 398-401. DOI: 10.1016/J.Msea.2005.08.072 |
0.69 |
|
| 2005 |
Xu C, Furukawa M, Horita Z, Langdon TG. The evolution of homogeneity and grain refinement during equal-channel angular pressing: A model for grain refinement in ECAP Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 398: 66-76. DOI: 10.1016/J.Msea.2005.03.083 |
0.668 |
|
| 2005 |
KAWASAKI M, XU C, LANGDON T. An investigation of cavity growth in a superplastic aluminum alloy processed by ECAP Acta Materialia. 53: 5353-5364. DOI: 10.1016/J.Actamat.2005.08.012 |
0.719 |
|
| 2005 |
Xu C, Furukawa M, Horita Z, Langdon TG. Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy Acta Materialia. 53: 749-758. DOI: 10.1016/J.Actamat.2004.10.026 |
0.663 |
|
| 2004 |
Xu C, Furukawa M, Horita Z, Langdon TG. Producing superplastic ultrafine-grained aluminum alloys through severe plastic deformation Materials Science Forum. 403-410. DOI: 10.4028/Www.Scientific.Net/Msf.447-448.403 |
0.669 |
|
| 2004 |
Xu C, Horita Z, Furukawa M, Langdon TG. Using Equal-Channel Angular Pressing for the Production of Superplastic Aluminum and Magnesium Alloys Journal of Materials Engineering and Performance. 13: 683-690. DOI: 10.1361/10599490421385 |
0.713 |
|
| 2004 |
Xu C, Furukawa M, Horita Z, Langdon TG. Severe plastic deformation as a processing tool for developing superplastic metals Journal of Alloys and Compounds. 378: 27-34. DOI: 10.1016/J.Jallcom.2003.10.065 |
0.709 |
|
| 2003 |
Xu C, Langdon TG. Influence of a round corner die on flow homogeneity in ECA pressing Scripta Materialia. 48: 1-4. DOI: 10.1016/S1359-6462(02)00354-8 |
0.484 |
|
| 2003 |
Xu C, Furukawa M, Horita Z, Langdon TG. Using ECAP to achieve grain refinement, precipitate fragmentation and high strain rate superplasticity in a spray-cast aluminum alloy Acta Materialia. 51: 6139-6149. DOI: 10.1016/S1359-6454(03)00433-6 |
0.695 |
|
| 2003 |
Xu C, Dixon W, Furukawa M, Horita Z, Langdon TG. Developing superplasticity in a spray-cast aluminum 7034 alloy through equal-channel angular pressing Materials Letters. 57: 3588-3592. DOI: 10.1016/S0167-577X(03)00130-7 |
0.709 |
|
| 2003 |
Xu C, Furukawa M, Horita Z, Langdon TG. Achieving a Superplastic Forming Capability through Severe Plastic Deformation Advanced Engineering Materials. 5: 359-364. DOI: 10.1002/Adem.200310075 |
0.718 |
|
| 2002 |
Vogel SC, Beyerlein IJ, Bourke MAM, Tomé CN, Rangaswamy P, Xu C, Langdon TG. Texture in equal-channel angular pressed aluminum and nickel Materials Science Forum. 673-678. DOI: 10.4028/Www.Scientific.Net/Msf.408-412.673 |
0.52 |
|
| 2001 |
Xu C, Lee SW, Langdon TG. An investigation of cavity development in a superplastic aluminium alloy prepared by equal-channel angular pressing Materials Science Forum. 521-526. DOI: 10.4028/Www.Scientific.Net/Msf.357-359.521 |
0.677 |
|
| Show low-probability matches. |