Year |
Citation |
Score |
2020 |
Amer S, Zarkani HA, Sfarra S, Omar M. Infrared Thermography Approach for Pipelines and Cylindrical Based Geometries. Polymers. 12: 1616. PMID 32708085 DOI: 10.3390/Polym12071616 |
0.331 |
|
2020 |
Hasan HR, Salah K, Jayaraman R, Omar M, Yaqoob I, Pesic S, Taylor T, Boscovic D. A Blockchain-Based Approach for the Creation of Digital Twins Ieee Access. 8: 34113-34126. DOI: 10.1109/Access.2020.2974810 |
0.326 |
|
2020 |
López F, Sfarra S, Chulkov A, Ibarra-Castanedo C, Zhang H, Omar MA, Vavilov V, Maldague XPV. Thermal stresses applied on helicopter blades useful to retrieve defects by means of infrared thermography and speckle patterns Thermal Science and Engineering. 18: 100511. DOI: 10.1016/J.Tsep.2020.100511 |
0.346 |
|
2020 |
Chulkov AO, Sfarra S, Saeed N, Peeters J, Ibarra-Castanedo C, Gargiulo G, Steenackers G, Maldague XPV, Omar MA, Vavilov V. Evaluating quality of marquetries by applying active IR thermography and advanced signal processing Journal of Thermal Analysis and Calorimetry. 1-14. DOI: 10.1007/S10973-020-09326-2 |
0.323 |
|
2019 |
Saeed N, Abdulrahman Y, Amer S, Omar MA. Experimentally validated defect depth estimation using artificial neural network in pulsed thermography Infrared Physics & Technology. 98: 192-200. DOI: 10.1016/J.Infrared.2019.03.014 |
0.333 |
|
2018 |
Omar M, Ameri SA, Mayyas A. Specific energy analysis for the manufacturing of light-weight automobile body International Journal of Shape Modeling. 4: 39. DOI: 10.1504/Ijsm.2018.10020976 |
0.697 |
|
2018 |
Saeed N, Omar MA, Abdulrahman Y, Salem S, Mayyas A. IR Thermographic Analysis of 3D Printed CFRP Reference Samples with Back-Drilled and Embedded Defects Journal of Nondestructive Evaluation. 37: 59. DOI: 10.1007/S10921-018-0512-2 |
0.678 |
|
2017 |
Mayyas AT, Omar M, Hayajneh M, Mayyas AR. Vehicle's lightweight design vs. electrification from life cycle assessment perspective Journal of Cleaner Production. 167: 687-701. DOI: 10.1016/J.Jclepro.2017.08.145 |
0.703 |
|
2016 |
Mayyas A, Omar MA, Hayajneh MT. Eco-material selection using fuzzy TOPSIS method International Journal of Sustainable Engineering. 9: 292-304. DOI: 10.1080/19397038.2016.1153168 |
0.701 |
|
2016 |
Omar MA, Qilun Z, Lujia F, Ali AA, Lahjouji D, Khraisheh M. A hybrid simulation approach for predicting energy flows in production lines International Journal of Sustainable Engineering. 9: 25-34. DOI: 10.1080/19397038.2015.1008599 |
0.309 |
|
2016 |
Mayyas AT, Mayyas AR, Omar M. Sustainable Lightweight Vehicle Design: A Case Study in Eco-Material Selection for Body-In-White Lightweight Composite Structures in Transport: Design, Manufacturing, Analysis and Performance. 267-302. DOI: 10.1016/B978-1-78242-325-6.00011-6 |
0.727 |
|
2016 |
Omar MA, Said Z, Raisi AA, Rahman YAA, Abusafieh A, Sankaran GN. The Calibration and Sensitivity Aspects of a Self-Referencing Routine When Applied to Composites Inspection: Using a Pulsed Thermographic Setup Journal of Nondestructive Evaluation. 35. DOI: 10.1007/S10921-016-0367-3 |
0.319 |
|
2015 |
Zhu Q, Lujia F, Mayyas A, Omar MA, Al-Hammadi Y, Saleh SA. Production energy optimization using low dynamic programming, a decision support tool for sustainable manufacturing Journal of Cleaner Production. 105: 178-183. DOI: 10.1016/J.Jclepro.2014.02.066 |
0.33 |
|
2014 |
Qattawi A, Abdelhamid M, Mayyas A, Omar M. Design Analysis for Origami-Based Folded Sheet Metal Parts Sae International Journal of Materials and Manufacturing. 7: 488-498. DOI: 10.4271/2014-01-9098 |
0.756 |
|
2014 |
Omar MA, Mayyas A, Zhou Q. Energy-Aware Manufacturing Using Information Technology Tools: A Knowledge Based System Approach International Journal of Information Technology and Web Engineering. 9: 70-77. DOI: 10.4018/Ijitwe.2014010106 |
0.685 |
|
2014 |
Abdelhamid M, Singh R, Qattawi A, Omar M, Haque I. Evaluation of on-board photovoltaic modules options for electric vehicles Ieee Journal of Photovoltaics. 4: 1576-1584. DOI: 10.1109/Jphotov.2014.2347799 |
0.729 |
|
2014 |
Abdelhamid M, Singh R, Omar M. Review of microcrack detection techniques for silicon solar cells Ieee Journal of Photovoltaics. 4: 514-524. DOI: 10.1109/Jphotov.2013.2285622 |
0.309 |
|
2014 |
Mayyas A, Omar MA, Mayyas AR, Qattawi A, Shen Q. Knowledge-based system, equipped with cluster analysis for eco-material selection: An automobile structure case study International Journal of Sustainable Engineering. 7: 200-213. DOI: 10.1080/19397038.2013.798713 |
0.766 |
|
2014 |
Qattawi A, Mayyas A, Dongri S, Omar M. Knowledge-based systems in sheet metal stamping: A survey International Journal of Computer Integrated Manufacturing. 27: 707-718. DOI: 10.1080/0951192X.2013.834463 |
0.73 |
|
2014 |
Qattawi A, Mayyas A, Thiruvengadam H, Kumar V, Dongri S, Omar M. Design considerations of flat patterns analysis techniques when applied for folding 3-D sheet metal geometries Journal of Intelligent Manufacturing. 25: 109-128. DOI: 10.1007/S10845-012-0679-9 |
0.776 |
|
2013 |
Qattawi A, Mayyas A, Abdelhamid M, Omar MA. Incorporating quality function deployment and analytical hierarchy process in a knowledge-based system for automotive production line design International Journal of Computer Integrated Manufacturing. 26: 839-856. DOI: 10.1080/0951192X.2013.799780 |
0.743 |
|
2013 |
Mayyas AT, Qattawi A, Mayyas AR, Omar M. Quantifiable measures of sustainability: A case study of materials selection for eco-lightweight auto-bodies Journal of Cleaner Production. 40: 177-189. DOI: 10.1016/J.Jclepro.2012.08.039 |
0.783 |
|
2013 |
Qattawi A, Mayyas A, Omar MA. An investigation of graph traversal algorithms in folded sheet metal parts design International Journal of Advanced Manufacturing Technology. 69: 2237-2246. DOI: 10.1007/S00170-013-5181-9 |
0.713 |
|
2013 |
Mayyas A, Omar M, Pisu P, Alahmer A, Montes C. Thermal modeling of an on-board nickel-metal hydride pack in a power-split hybrid configuration using a cell-based resistance-capacitance, electro-thermal model International Journal of Energy Research. 37: 331-346. DOI: 10.1002/Er.1923 |
0.764 |
|
2012 |
Tariq M, Abdelhamid M, Li Y, Omar M, Zhou Y. Fusion of Thermal and Visible Acquisitions for Evaluating Production-borne Scratches and Shunts in Photo-Voltaic PV Cells Journal of Materials Science Research. 1. DOI: 10.5539/Jmsr.V1N4P57 |
0.338 |
|
2012 |
Mayyas AT, Omar MA. Eco-material selection assisted with decision-making tools, guided by product's attributes; Functionality and manufacturability International Journal of Materials and Structural Integrity. 6: 190-219. DOI: 10.1504/Ijmsi.2012.049955 |
0.731 |
|
2012 |
Mayyas A, Qattawi A, Omar M, Shan D. Design for sustainability in automotive industry: A comprehensive review Renewable and Sustainable Energy Reviews. 16: 1845-1862. DOI: 10.1016/J.Rser.2012.01.012 |
0.767 |
|
2012 |
Mayyas AT, Qattawi A, Mayyas AR, Omar MA. Life cycle assessment-based selection for a sustainable lightweight body-in-white design Energy. 39: 412-425. DOI: 10.1016/J.Energy.2011.12.033 |
0.774 |
|
2012 |
Alahmer A, Omar M, Mayyas AR, Qattawi A. Analysis of vehicular cabins' thermal sensation and comfort state, under relative humidity and temperature control, using Berkeley and Fanger models Building and Environment. 48: 146-163. DOI: 10.1016/J.Buildenv.2011.08.013 |
0.761 |
|
2012 |
Alahmer A, Abdelhamid M, Omar M. Design for thermal sensation and comfort states in vehicles cabins Applied Thermal Engineering. 36: 126-140. DOI: 10.1016/J.Applthermaleng.2011.11.056 |
0.737 |
|
2011 |
Omar M, Thotti KR, Parvataneni R, Zhou Y, Mayyas AA, Qattawi A. Spatially constrained scanning scheme applied for gap measurements Sensor Review. 31: 239-245. DOI: 10.1108/02602281111140010 |
0.723 |
|
2011 |
Zhou Y, Mayyas A, Omar MA. Principal Component Analysis-Based Image Fusion Routine with Application to Automotive Stamping Split Detection Research in Nondestructive Evaluation. 22: 76-91. DOI: 10.1080/09349847.2011.553348 |
0.703 |
|
2011 |
Mayyas A, Shen Q, abdelhamid M, Shan D, Qattawi A, Omar M. Using Quality Function Deployment and Analytical Hierarchy Process for material selection of Body-In-White Materials and Design. 32: 2771-2782. DOI: 10.1016/J.Matdes.2011.01.001 |
0.779 |
|
2011 |
Mayyas AR, Omar M, Pisu P, Al-Ahmer A, Mayyas A, Montes C, Dongri S. Comprehensive thermal modeling of a power-split hybrid powertrain using battery cell model Journal of Power Sources. 196: 6588-6594. DOI: 10.1016/J.Jpowsour.2011.03.036 |
0.701 |
|
2011 |
Alahmer A, Omar MA, Mayyas A, Dongri S. Effect of relative humidity and temperature control on in-cabin thermal comfort state: Thermodynamic and psychometric analyses Applied Thermal Engineering. 31: 2636-2644. DOI: 10.1016/J.Applthermaleng.2011.04.033 |
0.727 |
|
2011 |
Alahmer A, Mayyas A, Mayyas AA, Omar MA, Shan D. Vehicular thermal comfort models; a comprehensive review Applied Thermal Engineering. 31: 995-1002. DOI: 10.1016/J.Applthermaleng.2010.12.004 |
0.726 |
|
2011 |
Mears L, Omar M, Kurfess TR. Automotive engineering curriculum development: Case study for Clemson University Journal of Intelligent Manufacturing. 22: 693-708. DOI: 10.1007/S10845-009-0329-Z |
0.328 |
|
2010 |
Omar MA, Parvataneni R, Zhou Y. A combined approach of self-referencing and Principle Component Thermography for transient, steady, and selective heating scenarios Infrared Physics & Technology. 53: 358-362. DOI: 10.1016/J.Infrared.2010.06.004 |
0.337 |
|
2010 |
Zhou Y, Mayyas A, Qattawi A, Omar M. Feature-level and pixel-level fusion routines when coupled to infrared night-vision tracking scheme Infrared Physics and Technology. 53: 43-49. DOI: 10.1016/J.Infrared.2009.08.011 |
0.71 |
|
2009 |
Omar M, Zhou Y, Planting E, Parvataneni R, Hung S. Combined active triangulation, morphology scheme for active shape retrieval Sensor Review. 29: 233-239. DOI: 10.1108/02602280910967648 |
0.304 |
|
2009 |
Zhou Y, Omar M. Pixel-Level fusion for infrared and visible acquisitions International Journal of Optomechatronics. 3: 41-53. DOI: 10.1080/15599610902717835 |
0.332 |
|
2009 |
Omar MA, Nara KR, Obieglo A, Belk N, Schalausky R. Analysis of non-load bearing, 2 component epoxy-adhesive to the hemming process variations; Thermo-Gravimetric, Differential Scanning Calorimetry, and Fourier Transform Infrared Spectroscopy FT-IR analyses Progress in Organic Coatings. 65: 104-108. DOI: 10.1016/J.Porgcoat.2008.10.002 |
0.306 |
|
2008 |
Omar M, Zhou Y. Automotive production control, using thermal vision systems-A passive thermal imagery for process control Sae Technical Papers. DOI: 10.4271/2008-01-0681 |
0.376 |
|
2008 |
Zhou Y, Omar M. Dynamic-template processing for passive thermograms: Applied to automotive stamping split detection Ndt and E International. 41: 582-588. DOI: 10.1016/J.Ndteint.2008.07.002 |
0.373 |
|
2008 |
Grujicic M, Sellappan V, Omar MA, Seyr N, Obieglo A, Erdmann M, Holzleitner J. An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing automotive components Journal of Materials Processing Technology. 197: 363-373. DOI: 10.1016/J.Jmatprotec.2007.06.058 |
0.301 |
|
2008 |
Omar MA, Zhou Y. A quantitative review of three flash thermography processing routines Infrared Physics & Technology. 51: 300-306. DOI: 10.1016/J.Infrared.2007.09.006 |
0.315 |
|
2007 |
Darras BM, Omar MA, Khraisheh MK. Experimental thermal analysis of friction stir processing Materials Science Forum. 3801-3806. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.3801 |
0.348 |
|
2007 |
Omar M, Zhou Y. Pedestrian tracking routine for passive automotive night vision systems Sensor Review. 27: 310-316. DOI: 10.1108/02602280710821443 |
0.357 |
|
2007 |
Gharaibeh B, Omar M, Salazar AJ, Saito K. Fluorescence emission sensing in coatings: Method for defects detection in coated surfaces of structural elements Progress in Organic Coatings. 58: 282-289. DOI: 10.1016/J.Porgcoat.2006.12.005 |
0.704 |
|
2007 |
Omar MA, Gharaibeh B, Salazar AJ, Saito K. Infrared thermography (IRT) and ultraviolet fluorescence (UVF) for the nondestructive evaluation of ballast tanks' coated surfaces Ndt and E International. 40: 62-70. DOI: 10.1016/J.Ndteint.2006.07.013 |
0.716 |
|
2007 |
Darras BM, Khraisheh MK, Abu-Farha FK, Omar MA. Friction stir processing of commercial AZ31 magnesium alloy Journal of Materials Processing Technology. 191: 77-81. DOI: 10.1016/J.Jmatprotec.2007.03.045 |
0.304 |
|
2007 |
Omar M, Kuwana K, Saito K, Couch C. The Use of Infrared Thermograph Technique to Investigate Welding Related Industrial Fires Fire Technology. 43: 319-329. DOI: 10.1007/S10694-007-0013-9 |
0.508 |
|
2006 |
Omar M, Viti V, Saito K, Liu J. Self‐adjusting robotic painting system Industrial Robot-An International Journal. 33: 50-55. DOI: 10.1108/01439910610638225 |
0.524 |
|
2006 |
Omar M, Hassan M, Donohue K, Saito K, Alloo R. Infrared thermography for inspecting the adhesion integrity of plastic welded joints Ndt & E International. 39: 1-7. DOI: 10.1016/J.Ndteint.2005.04.008 |
0.521 |
|
2006 |
Omar M, Chuah K, Saito K, Numasato A, Sakakibara M. Infrared seed inspection system (IRSIS) on painted car shells Infrared Physics & Technology. 48: 240-248. DOI: 10.1016/J.Infrared.2005.12.001 |
0.554 |
|
2005 |
Omar M, Chuah K, Saito K, Liu X, Alloo R. Thermal vision system for protective coat coverage inspection Quantitative Infrared Thermography Journal. 2: 55-64. DOI: 10.3166/Qirt.2.55-64 |
0.762 |
|
2005 |
Omar M, Hassan M, Saito K. Optimizing thermography depth probing with a dynamic thermal point spread function Infrared Physics & Technology. 46: 506-514. DOI: 10.1016/J.Infrared.2005.02.002 |
0.527 |
|
Show low-probability matches. |