Year |
Citation |
Score |
2023 |
Ryu S, Choi IW, Kim YJ, Lee S, Jeong W, Yu W, Cho GY, Cha SW. Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells. Acs Applied Materials & Interfaces. PMID 37665642 DOI: 10.1021/acsami.3c09025 |
0.409 |
|
2023 |
Ryu S, Hwang J, Jeong W, Yu W, Lee S, Kim K, Zheng C, Lee YH, Cha SW. A Self-Crystallized Nanofibrous Ni-GDC Anode by Magnetron Sputtering for Low-Temperature Solid Oxide Fuel Cells. Acs Applied Materials & Interfaces. PMID 36823788 DOI: 10.1021/acsami.2c22795 |
0.32 |
|
2020 |
Kim Y, Lee S, Cho GY, Yu W, Lee Y, Chang I, Baek JD, Cha SW. Investigation of Reducing In-Plane Resistance of Nickel Oxide-Samaria-Doped Ceria Anode in Thin-Film Solid Oxide Fuel Cells Energies. 13: 1989. DOI: 10.3390/en13081989 |
0.335 |
|
2020 |
Lee Y, Zeng J, Zheng C, Yu W, Cha SW, Baek JD, Chang I. Geometrical scale dependency of thin film solid oxide fuel cells Modern Physics Letters B. 34: 2040038. DOI: 10.1142/s0217984920400382 |
0.352 |
|
2020 |
Ryu S, Yu W, Chang I, Park T, Cho GY, Cha SW. Three dimensional YSZ interface engineering layer for enhancement of oxygen reduction reactions of low temperature solid oxide fuel cells Ceramics International. 46: 12648-12655. DOI: 10.1016/j.ceramint.2020.02.030 |
0.305 |
|
2019 |
Jeong W, Cho GY, Cha SW, Park T. Surface Roughening of Electrolyte Membrane for Pt- and Ru-Sputtered Passive Direct Methanol Fuel Cells. Materials (Basel, Switzerland). 12. PMID 31795467 DOI: 10.3390/ma12233969 |
0.322 |
|
2019 |
Lee S, Yu W, Cho GY, Cha SW. Effect of Microstructure Control of Thin Film Yttria Stabilized Zirconia Electrolyte for Solid Oxide Fuel Cells by Adjusting Oblique Angle and Target Substrate Distance of Sputtering Process Ecs Transactions. 91: 1097-1104. DOI: 10.1149/09101.1097ecst |
0.325 |
|
2019 |
Kang S, Lee J, Cha SW, Bae J. Development of Thin-Film Solid Oxide Fuel Cells Supported on Anode/Metal Substrates Ecs Transactions. 91: 931-939. DOI: 10.1149/09101.0931ecst |
0.321 |
|
2019 |
Kang S, Chang I, Pornprasertsuk R, Bae J, Cha SW. Influence of the start-up rate on the electrochemical impedance of a low-temperature solid oxide fuel cell fabricated by reactive sputtering Thin Solid Films. 689: 137445. DOI: 10.1016/J.Tsf.2019.137445 |
0.671 |
|
2019 |
Abdelkareem MA, Tanveer WH, Sayed ET, Assad MEH, Allagui A, Cha S. On the technical challenges affecting the performance of direct internal reforming biogas solid oxide fuel cells Renewable and Sustainable Energy Reviews. 101: 361-375. DOI: 10.1016/J.RSER.2018.10.025 |
0.314 |
|
2019 |
Lee S, Lee Y, Park J, Yu W, Cho GY, Kim Y, Cha SW. Effect of plasma-enhanced atomic layer deposited YSZ inter-layer on cathode interface of GDC electrolyte in thin film solid oxide fuel cells Renewable Energy. 144: 123-128. DOI: 10.1016/J.RENENE.2018.11.021 |
0.332 |
|
2019 |
Park T, Lee Y, Cha SW, Chang I. Effect of nano-pinholes within ceramic electrolytes of thin-film solid oxide fuel cells Journal of Industrial and Engineering Chemistry. 75: 108-114. DOI: 10.1016/J.JIEC.2019.03.008 |
0.357 |
|
2019 |
Cho GY, Lee YH, Yu W, An J, Cha SW. Optimization of Y2O3 dopant concentration of yttria stabilized zirconia thin film electrolyte prepared by plasma enhanced atomic layer deposition for high performance thin film solid oxide fuel cells Energy. 173: 436-442. DOI: 10.1016/J.ENERGY.2019.01.124 |
0.333 |
|
2019 |
Cho GY, Yu W, Lee YH, Lee Y, Tanveer WH, Kim Y, Lee S, Cha SW. Effects of Nanoscale PEALD YSZ Interlayer for AAO Based Thin Film Solid Oxide Fuel Cells International Journal of Precision Engineering and Manufacturing-Green Technology. 7: 423-430. DOI: 10.1007/S40684-019-00082-9 |
0.349 |
|
2018 |
Cho GY, Kim Y, Hong S, Yu W, Kim YB, Cha SW. Optimization of ScSZ / GDC Bilayer Thin Film Electrolyte for Anodic Aluminum Oxide supported Low Temperature Solid Oxide Fuel Cells. Nanotechnology. PMID 29708505 DOI: 10.1088/1361-6528/aac132 |
0.36 |
|
2018 |
Lee S, Cho GY, Park T, Lee YH, Yu W, Lee Y, Chang I, Cha SW. A nanoporous substrate-based low temperature solid oxide fuel cell using a thin film Ni anode Thin Solid Films. 666: 177-181. DOI: 10.1016/J.TSF.2018.09.039 |
0.366 |
|
2018 |
Lee Y, Park J, Yu W, Tanveer WH, Lee YH, Cho GY, Park T, Zheng C, Lee W, Cha SW. Nickel-based bilayer thin-film anodes for low-temperature solid oxide fuel cells Energy. 161: 1133-1138. DOI: 10.1016/J.ENERGY.2018.07.147 |
0.369 |
|
2018 |
Lee YH, Chang I, Cho GY, Park J, Yu W, Tanveer WH, Cha SW. Thin Film Solid Oxide Fuel Cells Operating Below 600°C: A Review International Journal of Precision Engineering and Manufacturing-Green Technology. 5: 441-453. DOI: 10.1007/S40684-018-0047-0 |
0.324 |
|
2017 |
Ji S, Seo HG, Lee S, Seo J, Lee Y, Tanveer WH, Cha SW, Jung W. Integrated design of a Ni thin-film electrode on a porous alumina template for affordable and high-performance low-temperature solid oxide fuel cells Rsc Advances. 7: 23600-23606. DOI: 10.1039/C7Ra02719B |
0.327 |
|
2017 |
Park T, Chang I, Lee HB, Ko SH, Cha SW. Performance variation of bendable polymer electrolyte fuel cell based on Ag nanowire current collector under mixed bending and twisting load International Journal of Hydrogen Energy. 42: 1884-1890. DOI: 10.1016/J.Ijhydene.2016.08.022 |
0.326 |
|
2017 |
Park T, Chang I, Jung JH, Lee HB, Ko SH, O'Hayre R, Yoo SJ, Cha SW. Effect of assembly pressure on the performance of a bendable polymer electrolyte fuel cell based on a silver nanowire current collector Energy. 134: 412-419. DOI: 10.1016/J.Energy.2017.05.197 |
0.595 |
|
2016 |
Yu W, Cho GY, Hong S, Lee Y, Kim YB, An J, Cha SW. PEALD YSZ-based bilayer electrolyte for thin film-solid oxide fuel cells. Nanotechnology. 27: 415402. PMID 27595193 DOI: 10.1088/0957-4484/27/41/415402 |
0.42 |
|
2016 |
Cho GY, Noh S, Lee YH, Ji S, Hong SW, Koo B, An J, Kim YB, Cha SW. Properties of nanostructured undoped ZrO2 thin film electrolytes by plasma enhanced atomic layer deposition for thin film solid oxide fuel cells Journal of Vacuum Science and Technology a: Vacuum, Surfaces and Films. 34. DOI: 10.1116/1.4938105 |
0.328 |
|
2016 |
Lee YH, Cho GY, Chang I, Ji S, Kim YB, Cha SW. Platinum-based nanocomposite electrodes for low-temperature solid oxide fuel cells with extended lifetime Journal of Power Sources. 307: 289-296. DOI: 10.1016/j.jpowsour.2015.12.089 |
0.339 |
|
2016 |
Park T, Cho GY, Lee YH, Tanveer WH, Yu W, Lee Y, Kim Y, An J, Cha SW. Effect of anode morphology on the performance of thin film solid oxide fuel cell with PEALD YSZ electrolyte International Journal of Hydrogen Energy. 41: 9638-9643. DOI: 10.1016/j.ijhydene.2016.04.092 |
0.375 |
|
2016 |
Chang I, Park T, Lee J, Lee HB, Ko SH, Cha SW. Flexible fuel cell using stiffness-controlled endplate International Journal of Hydrogen Energy. 41: 6013-6019. DOI: 10.1016/J.Ijhydene.2016.02.087 |
0.316 |
|
2016 |
Park J, Lee Y, Chang I, Cho GY, Ji S, Lee W, Cha SW. Atomic layer deposition of yttria-stabilized zirconia thin films for enhanced reactivity and stability of solid oxide fuel cells Energy. 116: 170-176. DOI: 10.1016/j.energy.2016.09.094 |
0.431 |
|
2016 |
Chang I, Bae J, Park J, Lee S, Ban M, Park T, Lee YH, Song HH, Kim YB, Cha SW. A thermally self-sustaining solid oxide fuel cell system at ultra-low operating temperature (319 °c) Energy. 104: 107-113. DOI: 10.1016/j.energy.2016.03.099 |
0.38 |
|
2016 |
Cha SW, Cho GY, Lee Y, Park T, Kim Y, Lee J. Effects of carbon contaminations on Y2O3-stabilized ZrO2 thin film electrolyte prepared by atomic layer deposition for thin film solid oxide fuel cells Cirp Annals. 65: 515-518. DOI: 10.1016/j.cirp.2016.04.079 |
0.325 |
|
2016 |
Yu W, Lee Y, Lee YH, Cho GY, Park T, Tanveer WH, Kim Y, Cha SW. Performance enhancement of thin film LSCF cathodes by gold current collecting layer International Journal of Precision Engineering and Manufacturing - Green Technology. 3: 185-188. DOI: 10.1007/s40684-016-0024-4 |
0.351 |
|
2016 |
Kim Y, Noh S, Cho GY, Park T, Lee YH, Yu W, Lee Y, Tanveer WH, Cha SW. Characterization of thin film solid oxide fuel cells with variations in the thickness of nickel oxide-gadolinia doped ceria anode International Journal of Precision Engineering and Manufacturing. 17: 1079-1083. DOI: 10.1007/s12541-016-0131-8 |
0.336 |
|
2015 |
Tanveer WH, Ji S, Yu W, Cho GY, Lee YH, Cha SW. Intermediate-Temperature Solid-Oxide Fuel Cells with a Gadolinium-Doped Ceria Anodic Functional Layer Deposited via Radio-Frequency Sputtering. Journal of Nanoscience and Nanotechnology. 15: 8926-30. PMID 26726620 |
0.371 |
|
2015 |
Ji S, Tanveer WH, Yu W, Kang S, Cho GY, Kim SH, An J, Cha SW. Surface engineering of nanoporous substrate for solid oxide fuel cells with atomic layer-deposited electrolyte. Beilstein Journal of Nanotechnology. 6: 1805-10. PMID 26425432 DOI: 10.3762/bjnano.6.184 |
0.42 |
|
2015 |
Ji S, Cho GY, Yu W, Su PC, Lee MH, Cha SW. Correction to Plasma-Enhanced Atomic Layer Deposition of Nanoscale Yttria-Stabilized Zirconia Electrolyte for Solid Oxide Fuel Cells with Porous Substrate. Acs Applied Materials & Interfaces. 7: 14163. PMID 26086339 DOI: 10.1021/acsami.5b04903 |
0.568 |
|
2015 |
Ji S, Cho GY, Yu W, Su PC, Lee MH, Cha SW. Plasma-enhanced atomic layer deposition of nanoscale yttria-stabilized zirconia electrolyte for solid oxide fuel cells with porous substrate. Acs Applied Materials & Interfaces. 7: 2998-3002. PMID 25625537 DOI: 10.1021/Am508710S |
0.596 |
|
2015 |
Tanveer WH, Ji S, Yu W, Cho GY, Lee YH, Cha SW. Intermediate-temperature solid-oxide fuel cells with a gadolinium-doped ceria anodic functional layer deposited via radio-frequency sputtering Journal of Nanoscience and Nanotechnology. 15: 8926-8930. DOI: 10.1166/jnn.2015.11529 |
0.339 |
|
2015 |
Kang S, Chang I, Kim Y, Cha SW. Influence of a platinum functional layer on a Ni-Ce0.9Gd0.1O1.95 anode for thin-film solid oxide fuel cells Journal of Vacuum Science & Technology a: Vacuum, Surfaces, and Films. 33: 05E120. DOI: 10.1116/1.4927160 |
0.323 |
|
2015 |
Yu W, Ji S, Cho GY, Noh S, Tanveer WH, An J, Cha SW. Atomic layer deposition of ultrathin blocking layer for low-temperature solid oxide fuel cell on nanoporous substrate Journal of Vacuum Science and Technology a: Vacuum, Surfaces and Films. 33. DOI: 10.1116/1.4904206 |
0.322 |
|
2015 |
Ji S, Lee YH, Park T, Cho GY, Noh S, Lee Y, Kim M, Ha S, An J, Cha SW. Doped ceria anode interlayer for low-temperature solid oxide fuel cells with nanothin electrolyte Thin Solid Films. DOI: 10.1016/j.tsf.2015.05.005 |
0.345 |
|
2015 |
Park T, Lee YH, Cho GY, Ji S, Park J, Chang I, Cha SW. Effect of the thickness of sputtered gadolinia-doped ceria as a cathodic interlayer in solid oxide fuel cells Thin Solid Films. 584: 120-124. DOI: 10.1016/j.tsf.2015.03.010 |
0.365 |
|
2015 |
Park J, Lee Y, Chang I, Lee W, Cha SW. Engineering of the electrode structure of thin film solid oxide fuel cells Thin Solid Films. 584: 125-129. DOI: 10.1016/j.tsf.2014.11.018 |
0.338 |
|
2015 |
Cho GY, Lee YH, Hong SW, Bae J, An J, Kim YB, Cha SW. High-performance thin film solid oxide fuel cells with scandia-stabilized zirconia (ScSZ) thin film electrolyte International Journal of Hydrogen Energy. 40: 15704-15708. DOI: 10.1016/j.ijhydene.2015.09.124 |
0.314 |
|
2015 |
Tanveer WH, Ji S, Yu W, Cha SW. Characterization of atomic layer deposited and sputtered yttria-stabilized-zirconia thin films for low-temperature solid oxide fuel cells International Journal of Precision Engineering and Manufacturing. 16: 2229-2234. DOI: 10.1007/s12541-015-0287-7 |
0.366 |
|
2014 |
Bae J, Chang I, Kang S, Hong S, Cha SW, Kim YB. Post-annealing of thin-film yttria stabilized zirconia electrolytes for anode-supported low-temperature solid oxide fuel cells. Journal of Nanoscience and Nanotechnology. 14: 9294-9. PMID 25971054 |
0.421 |
|
2014 |
Jee Y, Cho GY, An J, Kim HR, Son JW, Lee JH, Prinz FB, Lee MH, Cha SW. High performance Bi-layered electrolytes via atomic layer deposition for solid oxide fuel cells Journal of Power Sources. 253: 114-122. DOI: 10.1016/J.Jpowsour.2013.12.001 |
0.307 |
|
2014 |
Jung H, Bae K, Jang DY, Lee YH, Cha S, Shim JH. Evaluation of porous platinum, nickel, and lanthanum strontium cobaltite as electrode materials for low-temperature solid oxide fuel cells International Journal of Hydrogen Energy. 39: 17828-17835. DOI: 10.1016/j.ijhydene.2014.08.111 |
0.312 |
|
2014 |
Chang I, Park T, Lee J, Lee HB, Ji S, Lee MH, Ko SH, Cha SW. Performance enhancement in bendable fuel cell using highly conductive Ag nanowires International Journal of Hydrogen Energy. 39: 7422-7427. DOI: 10.1016/J.Ijhydene.2014.03.017 |
0.345 |
|
2014 |
Ji S, Chang I, Cho GY, Lee YH, Shim JH, Cha SW. Application of dense nano-thin platinum films for low-temperature solid oxide fuel cells by atomic layer deposition International Journal of Hydrogen Energy. 39: 12402-12408. DOI: 10.1016/j.ijhydene.2014.02.081 |
0.372 |
|
2014 |
Park J, Chang I, Paek JY, Ji S, Lee W, Cha SW, Lee JM. Fabrication of the large area thin-film solid oxide fuel cells Cirp Annals - Manufacturing Technology. 63: 513-516. DOI: 10.1016/j.cirp.2014.03.065 |
0.433 |
|
2013 |
Park T, Chang I, Cha SW. Augmentation method of triple phase boundary in thin film solid oxide fuel cell via physical vapor deposition. Journal of Nanoscience and Nanotechnology. 13: 7834-8. PMID 24266148 |
0.371 |
|
2013 |
Ji S, Chang I, Lee YH, Park J, Paek JY, Lee MH, Cha SW. Fabrication of low-temperature solid oxide fuel cells with a nanothin protective layer by atomic layer deposition. Nanoscale Research Letters. 8: 48. PMID 23342963 DOI: 10.1186/1556-276X-8-48 |
0.375 |
|
2013 |
Ha S, Su P, Cha S. Combinatorial deposition of a dense nano-thin film YSZ electrolyte for low temperature solid oxide fuel cells Journal of Materials Chemistry A. 1: 9645. DOI: 10.1039/C3Ta11758H |
0.629 |
|
2013 |
Chang I, Park T, Lee J, Lee MH, Ko SH, Cha SW. Bendable polymer electrolyte fuel cell using highly flexible Ag nanowire percolation network current collectors Journal of Materials Chemistry A. 1: 8541. DOI: 10.1039/C3Ta11699A |
0.37 |
|
2013 |
Shim JH, Kang S, Cha SW, Lee W, Kim YB, Park JS, Gür TM, Prinz FB, Chao CC, An J. Atomic layer deposition of thin-film ceramic electrolytes for high-performance fuel cells Journal of Materials Chemistry A. 1: 12695-12705. DOI: 10.1039/C3Ta11399J |
0.615 |
|
2013 |
Ji S, Chang I, Lee YH, Lee MH, Cha SW. Performance enhancement of thin-film ceramic electrolyte fuel cell using bi-layered yttrium-doped barium zirconate Thin Solid Films. 539: 117-121. DOI: 10.1016/j.tsf.2013.05.063 |
0.358 |
|
2013 |
Ha S, Su P, Ji S, Cha SW. Low temperature solid oxide fuel cells with proton-conducting Y:BaZrO3 electrolyte on porous anodic aluminum oxide substrate Thin Solid Films. 544: 125-128. DOI: 10.1016/J.Tsf.2013.04.058 |
0.61 |
|
2013 |
Chang I, Heo P, Cha SW. Thin film solid oxide fuel cell using a pinhole-free and dense Y-doped BaZrO3 Thin Solid Films. 534: 286-290. DOI: 10.1016/j.tsf.2013.03.024 |
0.331 |
|
2013 |
Zheng C, Kim N, Park Y, Lim W, Cha S, Xu G. The effect of battery temperature on total fuel consumption of fuel cell hybrid vehicles International Journal of Hydrogen Energy. 38: 5192-5200. DOI: 10.1016/j.ijhydene.2013.02.048 |
0.306 |
|
2013 |
Park J, Paek JY, Chang I, Ji S, Cha SW, Oh SI. Pulsed laser deposition of Y-doped BaZrO 3 thin film as electrolyte for low temperature solid oxide fuel cells Cirp Annals. 62: 563-566. DOI: 10.1016/j.cirp.2013.03.025 |
0.305 |
|
2012 |
Chang I, Ji S, Paek J, Lee Y, Park T, Cha S. Study on Low-Temperature Solid Oxide Fuel Cells Using Y-Doped BaZrO3 Transactions of the Korean Society of Mechanical Engineers B. 36: 931-935. DOI: 10.3795/KSME-B.2012.36.9.931 |
0.315 |
|
2012 |
Chang I, Lee M, Cha SW. Characteristic behaviors on air-breathing direct methanol fuel cells International Journal of Precision Engineering and Manufacturing. 13: 1141-1144. DOI: 10.1007/S12541-012-0151-Y |
0.306 |
|
2011 |
Kang S, Heo P, Lee YH, Ha J, Chang I, Cha S. Low intermediate temperature ceramic fuel cell with Y-doped BaZrO3 electrolyte and thin film Pd anode on porous substrate Electrochemistry Communications. 13: 374-377. DOI: 10.1016/J.Elecom.2011.01.029 |
0.605 |
|
2010 |
Jee Y, Chang I, Son JW, Lee JH, Kang S, Cha SW. Fabrication of thin solid oxide film fuel cells Journal of the Korean Ceramic Society. 47: 82-85. DOI: 10.4191/Kcers.2010.47.1.082 |
0.608 |
|
2010 |
Choi JW, Hwang Y, Cha SW, Kim MS. Experimental study on enhancing the fuel efficiency of an anodic dead-end mode polymer electrolyte membrane fuel cell by oscillating the hydrogen International Journal of Hydrogen Energy. 35: 12469-12479. DOI: 10.1016/j.ijhydene.2010.08.076 |
0.307 |
|
2010 |
Jee Y, Lah S, Son JW, Cha SW. Comparisons of the system performance for the small solid oxide fuel cell applications Current Applied Physics. 10. DOI: 10.1016/J.Cap.2009.11.010 |
0.313 |
|
2009 |
Chang I, Ha S, Kim S, Kang S, Kim J, Choi K, Cha SW. Operational condition analysis for vapor-fed direct methanol fuel cells Journal of Power Sources. 188: 205-212. DOI: 10.1016/J.Jpowsour.2008.11.058 |
0.571 |
|
2006 |
Shim JH, Cha SW, O'Hayre R, Gür TM, Prinz FB. Proton transport membranes for fuel cells: Polymeric versus dense ceramic Ecs Transactions. 3: 1059-1068. DOI: 10.1149/1.2356225 |
0.574 |
|
2006 |
Park YI, Su PC, Cha SW, Saito Y, Prinz FB. Thin-film SOFCs using gastight YSZ thin films on nanoporous substrates Journal of the Electrochemical Society. 153. DOI: 10.1149/1.2147318 |
0.312 |
|
2006 |
Cha SW, O'Hayre R, Park YI, Prinz FB. Electrochemical impedance investigation of flooding in micro-flow channels for proton exchange membrane fuel cells Journal of Power Sources. 161: 138-142. DOI: 10.1016/j.jpowsour.2006.04.123 |
0.565 |
|
2006 |
Fabian T, Posner JD, O'Hayre R, Cha SW, Eaton JK, Prinz FB, Santiago JG. The role of ambient conditions on the performance of a planar, air-breathing hydrogen PEM fuel cell Journal of Power Sources. 161: 168-182. DOI: 10.1016/J.Jpowsour.2006.03.054 |
0.586 |
|
2006 |
Buie CR, Posner JD, Fabian T, Cha SW, Kim D, Prinz FB, Eaton JK, Santiago JG. Water management in proton exchange membrane fuel cells using integrated electroosmotic pumping Journal of Power Sources. 161: 191-202. DOI: 10.1016/J.Jpowsour.2006.03.021 |
0.327 |
|
2004 |
Cha SW, O'Hayre R, Lee SJ, Saito Y, Prinz FB. Geometric scale effect of flow channels on performance of fuel cells Journal of the Electrochemical Society. 151: A1856-A1864. DOI: 10.1149/1.1799471 |
0.554 |
|
2004 |
Cha SW, O'Hayre R, Prinz FB. The influence of size scale on the performance of fuel cells Solid State Ionics. 175: 789-795. DOI: 10.1016/J.Ssi.2004.09.061 |
0.578 |
|
2004 |
Cha SW, O'Hayre R, Saito Y, Prinz FB. The scaling behavior of flow patterns: A model investigation Journal of Power Sources. 134: 57-71. DOI: 10.1016/j.jpowsour.2004.03.036 |
0.518 |
|
2003 |
O'Hayre R, Braithwaite D, Hermann W, Lee SJ, Fabian T, Cha SW, Saito Y, Prinz FB. Development of portable fuel cell arrays with printed-circuit technology Journal of Power Sources. 124: 459-472. DOI: 10.1016/S0378-7753(03)00802-4 |
0.558 |
|
2002 |
Lee SJ, Chang-Chien A, Cha SW, O'Hayre R, Park YI, Saito Y, Prinz FB. Design and fabrication of a micro fuel cell array with "flip-flop" interconnection Journal of Power Sources. 112: 410-418. DOI: 10.1016/S0378-7753(02)00393-2 |
0.628 |
|
2002 |
O'Hayre R, Lee SJ, Cha SW, Prinz FB. A sharp peak in the performance of sputtered platinum fuel cells at ultra-low platinum loading Journal of Power Sources. 109: 483-493. DOI: 10.1016/S0378-7753(02)00238-0 |
0.633 |
|
Show low-probability matches. |