James R. Barber - Publications

Affiliations: 
University of Michigan, Ann Arbor, Ann Arbor, MI 
Area:
Mechanical Engineering, Astronomy and Astrophysics
Website:
https://me.engin.umich.edu/people/faculty/james-barber/

208 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2020 Joe J, Thouless MD, Barber JR. Effect of Surface Roughness on Adhesive Instabilities for the Elastic Layer Frontiers in Mechanical Engineering. 6. DOI: 10.3389/Fmech.2020.00031  0.356
2020 Andresen HN, Hills DA, Barber JR, Vázquez J. Steady state cyclic behaviour of a half-plane contact in partial slip subject to varying normal load, moment, shear load, and moderate differential bulk tension International Journal of Solids and Structures. 156-161. DOI: 10.1016/J.Ijsolstr.2019.07.027  0.412
2020 Ciavarella M, Papangelo A, Barber JR. Effect of Wear on the Evolution of Contact Pressure at a Bimaterial Sliding Interface Tribology Letters. 68: 1-7. DOI: 10.1007/S11249-020-1269-1  0.413
2019 Ciavarella M, Joe J, Papangelo A, Barber JR. The role of adhesion in contact mechanics. Journal of the Royal Society, Interface. 16: 20180738. PMID 30958203 DOI: 10.1098/Rsif.2018.0738  0.415
2019 Andresen H, Hills DA, Barber JR, Vázquez J. Frictional half-plane contact problems subject to alternating normal and shear loads and tension in the steady state International Journal of Solids and Structures. 168: 166-171. DOI: 10.1016/J.Ijsolstr.2019.03.025  0.426
2019 Hong K, Lu W, Thouless MD, Barber JR. Corner stress fields in sliding at high friction coefficients European Journal of Mechanics a-Solids. 76: 308-311. DOI: 10.1016/J.Euromechsol.2019.04.018  0.329
2018 Howell PD, Barber JR, Ockendon JR. Multiple-contact thermoelastic oscillations Journal of Thermal Stresses. 41: 1329-1345. DOI: 10.1080/01495739.2018.1487268  0.324
2018 Joe J, Thouless MD, Barber JR. Effect of roughness on the adhesive tractions between contacting bodies Journal of the Mechanics and Physics of Solids. 118: 365-373. DOI: 10.1016/J.Jmps.2018.06.005  0.318
2018 Moore MR, Ramesh R, Hills DA, Barber JR. Half-plane partial slip contact problems with a constant normal load subject to a shear force and differential bulk tension Journal of the Mechanics and Physics of Solids. 118: 245-253. DOI: 10.1016/J.Jmps.2018.05.017  0.438
2018 Hills DA, Ramesh R, Barber JR, Moore MR. Methods to solve half-plane partial slip contact problems International Journal of Solids and Structures. 155: 155-159. DOI: 10.1016/J.Ijsolstr.2018.07.019  0.445
2017 Hong H, Han L, Perkins N, Hu C, Barber J. Nonlinear membrane stiffness model of a tennis racquet string bed Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology. 232: 57-65. DOI: 10.1177/1754337117723762  0.453
2017 Joe J, Scaraggi M, Barber JR. Effect of fine-scale roughness on the tractions between contacting bodies Tribology International. 111: 52-56. DOI: 10.1016/J.Triboint.2017.03.001  0.356
2017 Spagnoli A, Terzano M, Barber JR, Klarbring A. Non-linear programming in shakedown analysis with plasticity and friction Journal of the Mechanics and Physics of Solids. 104: 71-83. DOI: 10.1016/J.Jmps.2017.04.006  0.389
2017 Fleury RMN, Hills DA, Ramesh R, Barber JR. Incomplete contacts in partial slip subject to varying normal and shear loading, and their representation by asymptotes Journal of the Mechanics and Physics of Solids. 99: 178-191. DOI: 10.1016/J.Jmps.2016.11.016  0.429
2017 Ciavarella M, Greenwood JA, Barber JR. Effect of Tabor parameter on hysteresis losses during adhesive contact Journal of the Mechanics and Physics of Solids. 98: 236-244. DOI: 10.1016/J.Jmps.2016.10.005  0.415
2017 Ramesh R, Barber JR, Hills DA. Plane incomplete contact problems subject to bulk stress with a varying normal load International Journal of Mechanical Sciences. 122: 228-234. DOI: 10.1016/J.Ijmecsci.2017.01.032  0.402
2017 Klarbring A, Barber JR, Spagnoli A, Terzano M. Shakedown of discrete systems involving plasticity and friction European Journal of Mechanics a-Solids. 64: 160-164. DOI: 10.1016/J.Euromechsol.2017.02.006  0.38
2016 Barber JR. Nominally static frictional contacts under periodic loading Journal of Strain Analysis For Engineering Design. 51: 270-278. DOI: 10.1177/0309324715602844  0.404
2016 Lee Y, Liu Y, Barber JR, Jang YH. Thermal boundary conditions in sliding contact problem Tribology International. 103: 69-72. DOI: 10.1016/J.Triboint.2016.06.028  0.409
2016 Lee Y, Liu Y, Barber JR, Jang YH. Thermal considerations during transient asperity contact Tribology International. 94: 87-91. DOI: 10.1016/J.Triboint.2015.08.008  0.392
2016 Spagnoli A, Terzano M, Klarbing A, Barber JR. Shakedown in an elastic-plastic solid with a frictional crack Procedia Structural Integrity. 2: 2667-2673. DOI: 10.1016/J.Prostr.2016.06.333  0.368
2016 Fleury RMN, Hills DA, Barber JR. A corrective solution for finding the effects of edge-rounding on complete contact between elastically similar bodies. Part II: Near-edge asymptotes and the effect of shear International Journal of Solids and Structures. 85: 97-104. DOI: 10.1016/J.Ijsolstr.2015.11.032  0.432
2016 Fleury RMN, Hills DA, Barber JR. A corrective solution for finding the effects of edge-rounding on complete contact between elastically similar bodies. Part I: Contact law and normal contact considerations International Journal of Solids and Structures. 85: 89-96. DOI: 10.1016/J.Ijsolstr.2015.11.031  0.434
2016 Wang X, Barber JR. Numerical frictional algorithm with implementation of closed form analytical solutions Computer Methods in Applied Mechanics and Engineering. 300: 643-656. DOI: 10.1016/J.Cma.2015.12.001  0.368
2015 Papangelo A, Ciavarella M, Barber JR. Fracture mechanics implications for apparent static friction coefficient in contact problems involving slip-weakening laws Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 471. DOI: 10.1098/Rspa.2015.0271  0.378
2015 Hu Z, Lu W, Thouless MD, Barber JR. Simulation of wear evolution using fictitious eigenstrains Tribology International. 82: 191-194. DOI: 10.1016/J.Triboint.2014.10.015  0.34
2015 Hu Z, Lu W, Thouless MD, Barber JR. Effect of plastic deformation on the evolution of wear and local stress fields in fretting International Journal of Solids and Structures. DOI: 10.1016/J.Ijsolstr.2015.12.031  0.402
2015 Flicek RC, Hills DA, Barber JR, Dini D. Determination of the shakedown limit for large, discrete frictional systems European Journal of Mechanics, a/Solids. 49: 242-250. DOI: 10.1016/J.Euromechsol.2014.08.001  0.419
2014 Thaitirarot A, Flicek RC, Hills DA, Barber JR. The use of static reduction in the finite element solution of two-dimensional frictional contact problems Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 228: 1474-1487. DOI: 10.1177/0954406213509086  0.332
2014 Liu Y, Hoon Jang Y, Barber JR. Finite element implementation of an eigenfunction solution for the contact pressure variation due to wear Wear. 309: 134-138. DOI: 10.1016/J.Wear.2013.11.004  0.421
2014 Barber JR, Wang X. Numerical algorithms for two-dimensional dynamic frictional problems Tribology International. 80: 141-146. DOI: 10.1016/J.Triboint.2014.07.004  0.349
2014 Barber JR, Ciavarella M. JKR solution for an anisotropic half space Journal of the Mechanics and Physics of Solids. 64: 367-376. DOI: 10.1016/J.Jmps.2013.12.002  0.436
2014 Kim JH, Ahn YJ, Jang YH, Barber JR. Contact problems involving beams International Journal of Solids and Structures. 51: 4435-4439. DOI: 10.1016/J.Ijsolstr.2014.09.013  0.579
2014 Andersson LE, Barber JR, Ponter ARS. Existence and uniqueness of attractors in frictional systems with uncoupled tangential displacements and normal tractions International Journal of Solids and Structures. 51: 3710-3714. DOI: 10.1016/J.Ijsolstr.2014.07.004  0.409
2014 Liu Y, Barber JR. Transient Heat Conduction Between Rough Sliding Surfaces Tribology Letters. 55: 23-33. DOI: 10.1007/S11249-014-0328-X  0.381
2013 Barber JR. Incremental stiffness and electrical contact conductance in the contact of rough finite bodies Physical Review E - Statistical, Nonlinear, and Soft Matter Physics. 87. PMID 23410453 DOI: 10.1103/Physreve.87.013203  0.362
2013 Andersson LE, Barber JR, Ahn YJ. Attractors in frictional systems subjected to periodic loads Siam Journal On Applied Mathematics. 73: 1097-1116. DOI: 10.1137/120885024  0.574
2013 Barber JR. Similarity considerations in adhesive contact problems Tribology International. 67: 51-53. DOI: 10.1016/J.Triboint.2013.06.019  0.428
2013 Barber JR. Multiscale surfaces and Amontons' Law of Friction Tribology Letters. 49: 539-543. DOI: 10.1007/S11249-012-0094-6  0.34
2013 Barber JR, Ahn YJ. Discrete coulomb frictional systems subjected to periodic loading Lecture Notes in Applied and Computational Mechanics. 56: 1-11. DOI: 10.1007/978-3-642-33968-4_1  0.56
2012 Barber JR. Frictional systems under periodic loads - History-dependence, non-uniqueness and energy dissipation Journal of Physics: Conference Series. 382. DOI: 10.1088/1742-6596/382/1/012002  0.316
2012 Greenwood JA, Barber JR. Indentation of an elastic layer by a rigid cylinder International Journal of Solids and Structures. 49: 2962-2977. DOI: 10.1016/J.Ijsolstr.2012.05.036  0.358
2012 Davies M, Barber JR, Hills DA. Energy dissipation in a frictional incomplete contact with varying normal load International Journal of Mechanical Sciences. 55: 13-21. DOI: 10.1016/J.Ijmecsci.2011.11.006  0.408
2012 Hills DA, Thaitirarot A, Barber JR, Dini D. Correlation of fretting fatigue experimental results using an asymptotic approach International Journal of Fatigue. 43: 62-75. DOI: 10.1016/J.Ijfatigue.2012.02.006  0.308
2011 Hills DA, Davies M, Barber JR. An incremental formulation for half-plane contact problems subject to varying normal load, shear, and tension Journal of Strain Analysis For Engineering Design. 46: 436-443. DOI: 10.1177/0309324711405404  0.423
2011 Putignano C, Ciavarella M, Barber JR. Frictional energy dissipation in contact of nominally flat rough surfaces under harmonically varying loads Journal of the Mechanics and Physics of Solids. 59: 2442-2454. DOI: 10.1016/J.Jmps.2011.09.005  0.41
2011 Jang YH, Barber JR. Frictional energy dissipation in materials containing cracks Journal of the Mechanics and Physics of Solids. 59: 583-594. DOI: 10.1016/J.Jmps.2010.12.010  0.307
2011 Barber JR, Davies M, Hills DA. Frictional elastic contact with periodic loading International Journal of Solids and Structures. 48: 2041-2047. DOI: 10.1016/J.Ijsolstr.2011.03.008  0.402
2011 Paggi M, Barber JR. Contact conductance of rough surfaces composed of modified RMD patches International Journal of Heat and Mass Transfer. 54: 4664-4672. DOI: 10.1016/J.Ijheatmasstransfer.2011.06.011  0.356
2011 Kartal ME, Barber JR, Hills DA, Nowell D. Partial slip problem for two semi-infinite strips in contact International Journal of Engineering Science. 49: 203-211. DOI: 10.1016/J.Ijengsci.2010.11.007  0.393
2011 Jang YH, Barber JR. Effect of phase on the frictional dissipation in systems subjected to harmonically varying loads European Journal of Mechanics, a/Solids. 30: 269-274. DOI: 10.1016/J.Euromechsol.2011.01.008  0.345
2011 Barber JR. Frictional systems subjected to oscillating loads Annals of Solid and Structural Mechanics. 2: 45-55. DOI: 10.1007/S12356-011-0017-5  0.372
2011 Meleshko VV, Tokovyy YV, Barber JR. Axially symmetric temperature stresses in an elastic isotropic cylinder of finite length Journal of Mathematical Sciences. 176: 646-669. DOI: 10.1007/S10958-011-0428-1  0.43
2010 Kartal ME, Hills DA, Nowell D, Barber JR. Torsional contact between elastically similar flat-ended cylinders International Journal of Solids and Structures. 47: 1375-1380. DOI: 10.1016/J.Ijsolstr.2010.01.021  0.385
2010 Jang YH, Barber JR. Multiscale analysis of moving clusters of microcontacts International Journal of Heat and Mass Transfer. 53: 3817-3822. DOI: 10.1016/J.Ijheatmasstransfer.2010.04.034  0.331
2009 Lee D, Barber JR, Thouless MD. Indentation of an elastic half space with material properties varying with depth. International Journal of Engineering Science. 47: 1274-1283. PMID 20161595 DOI: 10.1016/J.Ijengsci.2008.08.005  0.38
2009 Al-Shabibi AM, Barber JR. Transient solution of the unperturbed thermoelastic contact problem Journal of Thermal Stresses. 32: 226-243. DOI: 10.1080/01495730802507980  0.767
2009 Jang YH, Cho H, Barber JR. The thermoelastic Hertzian contact problem International Journal of Solids and Structures. 46: 4073-4078. DOI: 10.1016/J.Ijsolstr.2009.08.004  0.444
2008 Lee D, Triantafyllidis N, Barber JR, Thouless MD. Surface instability of an elastic half space with material properties varying with depth. Journal of the Mechanics and Physics of Solids. 56: 858-868. PMID 19122875 DOI: 10.1016/J.Jmps.2007.06.010  0.383
2008 Li J, Barber JR. Solution of transient thermoelastic contact problems by the fast speed expansion method Wear. 265: 402-410. DOI: 10.1016/J.Wear.2007.11.010  0.572
2008 Ahn YJ, Bertocchi E, Barber JR. Shakedown of coupled two-dimensional discrete frictional systems Journal of the Mechanics and Physics of Solids. 56: 3433-3440. DOI: 10.1016/J.Jmps.2008.09.003  0.571
2008 Kadish J, Barber JR, Washabaugh PD, Scheeres DJ. Stresses in accreted planetary bodies International Journal of Solids and Structures. 45: 540-550. DOI: 10.1016/J.Ijsolstr.2007.08.008  0.384
2008 Ahn YJ, Barber JR. Response of frictional receding contact problems to cyclic loading International Journal of Mechanical Sciences. 50: 1519-1525. DOI: 10.1016/J.Ijmecsci.2008.08.003  0.606
2008 Barber JR, Ciavarella M, Afferrante L, Sackfield A. Effect of small harmonic oscillations during the steady rolling of a cylinder on a plane International Journal of Mechanical Sciences. 50: 1344-1353. DOI: 10.1016/J.Ijmecsci.2008.07.011  0.383
2008 Dini D, Barber JR, Churchman CM, Sackfield A, Hills DA. The application of asymptotic solutions to contact problems characterised by logarithmic singularities European Journal of Mechanics, a/Solids. 27: 847-858. DOI: 10.1016/J.Euromechsol.2007.12.003  0.422
2008 Barber JR, Klarbring A, Ciavarella M. Shakedown in frictional contact problems for the continuum Comptes Rendus Mecanique. 336: 34-41. DOI: 10.1016/J.Crme.2007.10.013  0.409
2007 Barber JR, Ting TCT. Three-dimensional solutions for general anisotropy Journal of the Mechanics and Physics of Solids. 55: 1993-2006. DOI: 10.1016/J.Jmps.2007.02.002  0.395
2007 Klarbring A, Ciavarella M, Barber JR. Shakedown in elastic contact problems with Coulomb friction International Journal of Solids and Structures. 44: 8355-8365. DOI: 10.1016/J.Ijsolstr.2007.06.013  0.424
2006 Barber JR. Three-dimensional elasticity solutions for isotropic and generally anisotropic bodies Applied Mechanics and Materials. 5: 541-550. DOI: 10.4028/Www.Scientific.Net/Amm.5-6.541  0.408
2006 Lee D, Barber JR. An automated procedure for determining asymptotic elastic stress fields at singular points Journal of Strain Analysis For Engineering Design. 41: 287-295. DOI: 10.1243/03093247Jsa164  0.343
2006 Adams GG, Barber JR, Ciavarella M, Rice JR. Closure to "discussion of 'a paradox in sliding contact problems with friction' " (2006, ASME J. Appl. Mech., 73, pp. 884-886) Journal of Applied Mechanics, Transactions Asme. 73: 887. DOI: 10.1115/1.2202856  0.38
2006 Chin M, Barber JR, Hu SJ. Effect of elastic recovery on the electrical contact resistance in anisotropic conductive adhesive assemblies Ieee Transactions On Components and Packaging Technologies. 29: 137-144. DOI: 10.1109/Tcapt.2005.853166  0.33
2006 Afferrante L, Ciavarella M, Barber JR. Sliding thermoelastodynamic instability Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 462: 2161-2176. DOI: 10.1098/Rspa.2006.1676  0.346
2006 Barber JR. Three-dimensional elasticity problems for the prismatic bar Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 462: 1877-1896. DOI: 10.1098/Rspa.2005.1646  0.391
2006 Al-Bahkali EA, Barber JR. Nonlinear steady state solution for a thermoelastic sliding system using finite element method Journal of Thermal Stresses. 29: 153-168. DOI: 10.1080/01495730500257466  0.765
2006 Ciavarella M, Baldini A, Barber JR, Strozzi A. Reduced dependence on loading parameters in almost conforming contacts International Journal of Mechanical Sciences. 48: 917-925. DOI: 10.1016/J.Ijmecsci.2006.03.016  0.422
2005 Chin M, Hu SJ, Barber JR. Design guidelines for anisotropic conductive adhesive assemblies in microelectronics packaging American Society of Mechanical Engineers, Electronic and Photonic Packaging, Epp. 5: 371-374. DOI: 10.1115/1.2912180  0.312
2005 Oh S, Grosh K, Barber JR. Energy conserving equations of motion for gear systems Journal of Vibration and Acoustics, Transactions of the Asme. 127: 208-212. DOI: 10.1115/1.1891815  0.317
2005 Adams GG, Barber JR, Ciavarella M, Rice JR. A paradox in sliding contact problems with friction Journal of Applied Mechanics, Transactions Asme. 72: 450-452. DOI: 10.1115/1.1867992  0.411
2005 Upmanyu M, Barber JR. Interrupted tubules in filamentous crystals: Elastic analysis Physical Review B - Condensed Matter and Materials Physics. 72. DOI: 10.1103/Physrevb.72.205442  0.32
2005 Andersson L, Klarbring A, Barber JR, Ciavarella M. On the existence and uniqueness of steady state solutions in thermoelastic contact with frictional heating Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 461: 1261-1282. DOI: 10.1098/Rspa.2004.1398  0.384
2005 Ciavarella M, Barber JR. Stability of thermoelastic contact for a rectangular elastic block sliding against a rigid wall European Journal of Mechanics, a/Solids. 24: 371-376. DOI: 10.1016/J.Euromechsol.2004.10.008  0.445
2004 Ciavarella M, Murolo G, Demelio G, Barber JR. Elastic contact stiffness and contact resistance for the Weierstrass profile Journal of the Mechanics and Physics of Solids. 52: 1247-1265. DOI: 10.1016/J.Jmps.2003.12.002  0.407
2004 Mugadu A, Hills DA, Barber JR, Sackfield A. The application of asymptotic solutions to characterising the process zone in almost complete frictional contacts International Journal of Solids and Structures. 41: 385-397. DOI: 10.1016/J.Ijsolstr.2003.09.038  0.448
2004 Barber JR. Stresses in a half space due to newtonian gravitation Journal of Elasticity. 75: 187-192. DOI: 10.1007/S10659-005-4105-9  0.345
2003 Barber JR, Grosh K, Oh S. Energy Considerations in Systems With Varying Stiffness Journal of Applied Mechanics, Transactions Asme. 70: 465-469. DOI: 10.1115/1.1574060  0.369
2003 Barber JR. Bounds on the electrical resistance between contacting elastic rough bodies Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 459: 53-66. DOI: 10.1098/Rspa.2002.1038  0.421
2003 Jang YH, Barber JR. Effect of contact statistics on electrical contact resistance Journal of Applied Physics. 94: 7215-7221. DOI: 10.1063/1.1622995  0.342
2003 Vlassak JJ, Ciavarella M, Barber JR, Wang X. The indentation modulus of elastically anisotropic materials for indenters of arbitrary shape Journal of the Mechanics and Physics of Solids. 51: 1701-1721. DOI: 10.1016/S0022-5096(03)00066-8  0.448
2003 Sackfield A, Mugadu A, Barber JR, Hills DA. The application of asymptotic solutions to characterising the process zone in almost complete frictionless contacts Journal of the Mechanics and Physics of Solids. 51: 1333-1346. DOI: 10.1016/S0022-5096(03)00020-6  0.411
2003 Ciavarella M, Johansson L, Afferrante L, Klarbring A, Barber JR. Interaction of thermal contact resistance and frictional heating in thermoelastic instability International Journal of Solids and Structures. 40: 5583-5597. DOI: 10.1016/S0020-7683(03)00313-5  0.417
2002 Sackfield A, Barber JR, Hills DA, Truman CE. A shrink-fit shaft subject to torsion European Journal of Mechanics a-Solids. 21: 73-84. DOI: 10.1016/S0997-7538(01)01197-4  0.372
2002 Al-Shabibi AM, Barber JR. Transient solution of a thermoelastic instability problem using a reduced order model International Journal of Mechanical Sciences. 44: 451-464. DOI: 10.1016/S0020-7403(01)00110-2  0.748
2002 Fan S, Barber JR. Solution of periodic heating problems by the transfer matrix method International Journal of Heat and Mass Transfer. 45: 155-1158. DOI: 10.1016/S0017-9310(01)00216-2  0.356
2001 Al-Shabibi AM, Barber JR. Transient solution of 2-D TEI problem using reduced order models Sae Technical Papers. DOI: 10.4271/2001-01-1149  0.73
2001 Zagrodzki P, Lam KB, Bahkali EA, Barber JR. Nonlinear Transient Behavior of a Sliding System With Frictionally Excited Thermoelastic Instability Journal of Tribology-Transactions of the Asme. 123: 699-708. DOI: 10.1115/1.1353180  0.368
2000 Yi Y, Barber JR, Zagrodzki P. Eigenvalue solution of thermoelastic instability problems using Fourier reduction Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 456: 2799-2821. DOI: 10.1098/Rspa.2000.0641  0.388
2000 Ciavarella M, Demelio G, Barber JR, Jang YH. Linear elastic contact of the Weierstrass profile Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 456: 387-405. DOI: 10.1098/Rspa.2000.0522  0.387
1999 Yi Y, Du S, Barber JR, Fash JW. Effect of Geometry on Thermoelastic Instability in Disk Brakes and Clutches Journal of Tribology-Transactions of the Asme. 121: 661-666. DOI: 10.1115/1.2834120  0.339
1999 Cho H, Barber JR. Stability of the three-dimensional Coulomb friction law Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 455: 839-861. DOI: 10.1098/Rspa.1999.0337  0.436
1999 Barber JR. Thermoelasticity and contact Journal of Thermal Stresses. 22: 513-525. DOI: 10.1080/014957399280850  0.43
1998 Joachim-Ajao D, Barber JR. Effect of material properties in certain thermoelastic contact problems Journal of Applied Mechanics, Transactions Asme. 65: 889-893. DOI: 10.1115/1.2791928  0.464
1998 Leamy MJ, Barber JR, Perkins NC. Distortion of a Harmonic Elastic Wave Reflected From a Dry Friction Support Journal of Applied Mechanics. 65: 851-857. DOI: 10.1115/1.2791921  0.39
1998 Jang YH, Barber JR, Hu SJ. Electrical conductance between conductors with dissimilar temperature-dependent material properties Journal of Physics D. 31: 3197-3205. DOI: 10.1088/0022-3727/31/22/004  0.388
1998 Audebert N, Barber JR, Zagrodzki P. Buckling Of Automatic Transmission Clutch Plates Due To Thermoelastic/Plastic Residual Stresses Journal of Thermal Stresses. 21: 309-326. DOI: 10.1080/01495739808956149  0.338
1998 Li C, Barber JR. Thermoelastic stability of duplex heat exchanger tubes International Journal of Mechanical Sciences. 40: 575-588. DOI: 10.1016/S0020-7403(97)00078-7  0.37
1998 Leamy MJ, Barber JR, Perkins NC. Distortion of a harmonic elastic wave reflected from a dry friction support Journal of Applied Mechanics, Transactions Asme. 65: 851-857.  0.542
1997 Leamy MJ, Perkins NC, Barber JR, Meckstroth RJ. Influence of tensioner friction on accessory drive dynamics Sae Technical Papers. DOI: 10.4271/971962  0.537
1997 Castillo J, Barber JR. Lateral contact of slender prismatic bodies Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 453: 2397-2412. DOI: 10.1098/Rspa.1997.0128  0.43
1997 Li C, Barber JR. Stability of thermoelastic contact of two layers of dissimilar materials Journal of Thermal Stresses. 20: 169-184. DOI: 10.1080/01495739708956097  0.326
1996 Ayala JRR, Lee K, Rahman M, Barber JR. Effect of Intermittent Contact on the Stability of Thermoelastic Sliding Contact Journal of Tribology-Transactions of the Asme. 118: 102-108. DOI: 10.1115/1.2837063  0.387
1996 Barber JR. Surface displacements due to a steadily moving point force Journal of Applied Mechanics, Transactions Asme. 63: 245-250. DOI: 10.1115/1.2788856  0.368
1996 Yeo T, Barber JR. Finite element analysis of the stability of static thermoelastic contact Journal of Thermal Stresses. 19: 169-184. DOI: 10.1080/01495739608946168  0.441
1995 Li NY, Hector LG, Barber JR. Strain rate relaxation effect on freezing front growth instability during planar solidification of pure metals, part 2. coupled theory Journal of Thermal Stresses. 18: 69-85. DOI: 10.1080/01495739508946291  0.359
1995 Yeo T, Barber JR. Stability of a semi-infinite strip inthermoelastic contact with a rigid wall International Journal of Solids and Structures. 32: 553-567. DOI: 10.1016/0020-7683(94)00124-F  0.428
1994 Yeo T, Barber JR. Finite element analysis of thermoelastic contact stability Journal of Applied Mechanics, Transactions Asme. 61: 919-922. DOI: 10.1115/1.2901578  0.381
1994 Georgiadis HG, Barber JR. Erratum: ``Steady-State Transonic Motion of a Line Load Over an Elastic Half-Space: The Corrected Cole/Huth Solution'' (Journal of Applied Mechanics, 1993, 60, pp. 772-774) Journal of Applied Mechanics. 61: 66-66. DOI: 10.1115/1.2901422  0.336
1994 Yigit F, Barber JR. Effect of Stefan number on thermoelastic instabilities in unidirectional solidification International Journal of Mechanical Sciences. 36: 707-723. DOI: 10.1016/0020-7403(94)90087-6  0.421
1993 Georgiadis HG, Barber JR. Steady-state transonic motion of a line load over an elastic half-space. The corrected Cole/Huth solution Journal of Applied Mechanics, Transactions Asme. 60: 772-774. DOI: 10.1115/1.2900872  0.366
1993 Yigit F, Li NY, Barber JR. Effect of thermal capacity on thermoelastic instability during the solidification of pure metals Journal of Thermal Stresses. 16: 285-309. DOI: 10.1080/01495739308946231  0.361
1993 Zhang R, Barber JR. Transient thermoelastic contact and stability of two thin-walled cylinders Journal of Thermal Stresses. 16: 31-54. DOI: 10.1080/01495739308946215  0.448
1993 Lee K, Barber JR. The effect of shear tractions on frictionally-excited thermoelastic instability Wear. 160: 237-242. DOI: 10.1016/0043-1648(93)90426-M  0.317
1993 Georgiadis HG, Barber JR. On the super-Rayleigh/subseismic elastodynamic indentation problem Journal of Elasticity. 31: 141-161. DOI: 10.1007/Bf00044967  0.407
1992 Li NY, Hector LG, Barber JR. Theories of thermoelastic instability duringsolidification based on the neumanntemperature solution Journal of Thermal Stresses. 15: 265-293. DOI: 10.1080/01495739208946137  0.362
1992 Barber JR, Sturla FA. Application of the reciprocal theorem to some problems for the elastic half-space Journal of the Mechanics and Physics of Solids. 40: 17-25. DOI: 10.1016/0022-5096(92)90212-K  0.417
1992 Ben-Ammar F, Kaviany M, Barber JR. Heat transfer during impact International Journal of Heat and Mass Transfer. 35: 1495-1506. DOI: 10.1016/0017-9310(92)90039-U  0.307
1992 Lu X, Barber JR, Comninou M. Stress concentration due to an array or hemispherical cavities at the surface of an elastic half-space Journal of Elasticity. 28: 111-122. DOI: 10.1007/Bf00041775  0.347
1991 Georgiadis HG, Barber JR, Ammar FB. An Asymptotic Solution For Short-Time Transient Heat Conduction Between Two Dissimilar Bodies In Contact Quarterly Journal of Mechanics and Applied Mathematics. 44: 303-322. DOI: 10.1093/Qjmam/44.2.303  0.419
1991 Yeo T, Barber JR. Stability of thermoelastic contact of a layer and a half-plane Journal of Thermal Stresses. 14: 371-388. DOI: 10.1080/01495739108927074  0.321
1991 Li NY, Barber JR. Thermoelastic instability in planar solidification International Journal of Mechanical Sciences. 33: 945-959. DOI: 10.1016/0020-7403(91)90051-4  0.393
1991 Barber JR. Some anomalies of the curved bar problem in classical elasticity Journal of Elasticity. 26: 75-86. DOI: 10.1007/Bf00041152  0.42
1990 Zhang R, Barber JR. Effect of material properties on the stability of static thermoelastic contact Journal of Applied Mechanics, Transactions Asme. 57: 365-369. DOI: 10.1115/1.2891998  0.348
1990 Barber JR. Contact problems for the thin elastic layer International Journal of Mechanical Sciences. 32: 129-132. DOI: 10.1016/0020-7403(90)90112-V  0.367
1990 Barber JR, Billings DA. An approximate solution for the contact area and elastic compliance of a smooth punch of arbitrary shape International Journal of Mechanical Sciences. 32: 991-997. DOI: 10.1016/0020-7403(90)90003-2  0.434
1989 Azarkhin A, Barber JR, Rolf RL. Combined thermal-mechanical effects in frictional sliding Key Engineering Materials. 33: 135-158. DOI: 10.4028/Www.Scientific.Net/Kem.33.135  0.391
1989 Barber JR. An asymptotic solution for short-time transient heat conduction between two similar contacting bodies International Journal of Heat and Mass Transfer. 32: 943-949. DOI: 10.1016/0017-9310(89)90243-3  0.373
1989 Li NY, Barber JR. Sinusoidal perturbation solutions for planar solidification International Journal of Heat and Mass Transfer. 32: 935-941. DOI: 10.1016/0017-9310(89)90242-1  0.368
1988 Sturla FA, Barber JR. THERMAL STRESSES DUE TO A PLANE CRACK IN GENERAL ANISOTROPIC MATERIAL Journal of Applied Mechanics, Transactions Asme. 55: 372-376. DOI: 10.1115/1.3173685  0.317
1988 Sturla FA, Barber JR. THERMOELASTIC GREEN'S FUNCTIONS FOR PLANE PROBLEMS IN GENERAL ANISOTROPY Journal of Applied Mechanics, Transactions Asme. 55: 245-247. DOI: 10.1115/1.3173643  0.355
1988 Azarkhin A, Barber JR. Green's functions for subsurface thermal stresses due to surface heating Journal of Thermal Stresses. 11: 1-16. DOI: 10.1080/01495738808961917  0.365
1988 Barber JR, Zhang R. Transient behaviour and stability for the thermoelastic contact of two rods of dissimilar materials International Journal of Mechanical Sciences. 30: 691-704. DOI: 10.1016/0020-7403(88)90096-3  0.409
1987 Azarkhin A, Barber JR. Transient contact of two sliding half-planes with wear Trans. Asme J. Tribology. 109: 598-603. DOI: 10.1115/1.3261515  0.42
1987 Sheppard SD, Barber JR, Comninou M. Subsurface cracks under conditions of slip, stick, and separation caused by a moving compressive load . DOI: 10.1115/1.3173025  0.339
1986 Azarkhin A, Barber JR. THERMOELASTIC INSTABILITY FOR THE TRANSIENT CONTACT PROBLEM OF TWO SLIDING HALF-PLANES American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3171812  0.467
1986 Azarkhin A, Barber JR. STABILITY OF A LONG CYLINDRICAL SHELL WITH PARTIAL CONTACT AT THE END FACE Studies in Applied Mechanics. 143-154. DOI: 10.1016/B978-0-444-42625-3.50014-5  0.421
1986 Sheppard SD, Hills DA, Barber JR. An analysis of fretting cracks-II. Unloading and reloading phases International Journal of Solids and Structures. 22: 387-396. DOI: 10.1016/0020-7683(86)90012-0  0.323
1986 Hills DA, Barber JR. Steady sliding of a circular cylinder over a dissimilar thermally conducting half-plane International Journal of Mechanical Sciences. 28: 613-622. DOI: 10.1016/0020-7403(86)90076-7  0.422
1986 Barber JR. The influence of interface thermal contact resistance on the heat transfer performance of prestressed Duplex tube International Journal of Heat and Mass Transfer. 29: 761-767. DOI: 10.1016/0017-9310(86)90127-4  0.373
1986 Azarkhin A, Barber JR. THERMOELASTIC INSTABILITY FOR THE TRANSIENT CONTACT PROBLEM OF TWO SLIDING HALF-PLANES American Society of Mechanical Engineers (Paper) 0.363
1985 Sheppard S, Barber JR, Comninou M. Short subsurface cracks under conditions of slip and stick caused by a moving compressive load Trans. Asme J. Appl. Mech.. 52: 811-817. DOI: 10.1115/1.3169151  0.361
1985 Hills DA, Barber JR. Steady motion of an insulating rigid flat-ended punch over a thermally conducting half-plane Wear. 102: 15-22. DOI: 10.1016/0043-1648(85)90087-0  0.383
1985 Azarkhin A, Barber JR. On partial contact of a thin-walled circular cylinder and a rigid half-space International Journal of Mechanical Sciences. 27: 551-557. DOI: 10.1016/0020-7403(85)90071-2  0.417
1984 Berry GA, Barber JR. The Division of Frictional Heat—A Guide to the Nature of Sliding Contact Journal of Tribology-Transactions of the Asme. 106: 405-415. DOI: 10.1115/1.3260948  0.354
1984 Barber JR. THERMOELASTIC DISPLACEMENTS AND STRESSES DUE TO A HEAT SOURCE MOVING OVER THE SURFACE OF A HALF PLANE Journal of Applied Mechanics, Transactions Asme. 51: 636-640. DOI: 10.1115/1.3167685  0.37
1984 Azarkhin A, Barber JR. TRANSIENT THERMOELASTIC CONTACT PROBLEM OF TWO SLIDING HALF-PLANES Wear. 102: 1-13. DOI: 10.1016/0043-1648(85)90086-9  0.445
1984 Comninou M, Barber JR. The thermoelastic Hertz problem with pressure dependent contact resistance International Journal of Mechanical Sciences. 26: 549-554. DOI: 10.1016/0020-7403(84)90009-2  0.402
1984 Barber JR. Some polynomial solutions for the non-axisymmetric Boussinesq problem Journal of Elasticity. 14: 217-221. DOI: 10.1007/Bf00041668  0.395
1983 Martin-Moran CJ, Barber JR, Comninou M. The Penny-Shaped Interface Crack With Heat Flow, Part 1: Perfect Contact Journal of Applied Mechanics. 50: 29-36. DOI: 10.1115/1.3167013  0.409
1983 Gladwell GML, Barber JR. Thermoelastic contact problems with radiation boundary conditions Quarterly Journal of Mechanics and Applied Mathematics. 36: 403-417. DOI: 10.1093/Qjmam/36.3.403  0.369
1983 Gladwell GML, Barber JR, Olesiak Z. Thermal Problems With Radiation Boundary Conditions Quarterly Journal of Mechanics and Applied Mathematics. 36: 387-401. DOI: 10.1093/Qjmam/36.3.387  0.37
1983 Comninou M, Barber JR. Frictional slip between a layer and a substrate due to a periodic tangential surface force International Journal of Solids and Structures. 19: 533-539. DOI: 10.1016/0020-7683(83)90090-2  0.411
1983 Comninou M, Barber JR, Dundurs J. Interface slip caused by a surface load moving at constant speed International Journal of Mechanical Sciences. 25: 41-46. DOI: 10.1016/0020-7403(83)90085-1  0.381
1983 Chang FK, Comninou M, Barber JR. Slip between a layer and a substrate caused by a normal force moving steadily over the surface International Journal of Mechanical Sciences. 25: 803-809. DOI: 10.1016/0020-7403(83)90062-0  0.316
1983 Barber JR. A four-part boundary value problem in elasticity - indentation by a discontinuously concave punch Applied Scientific Research. 40: 159-167. DOI: 10.1007/Bf00386217  0.438
1983 Barber JR. The solution of elasticity problems for the half-space by the method of Green and Collins Applied Scientific Research. 40: 135-157. DOI: 10.1007/Bf00386216  0.408
1983 Barber JR. The distortion of a cylinder with non-uniform axial heat conduction Journal of Elasticity. 13: 441-447. DOI: 10.1007/Bf00042521  0.366
1982 Comninou M, Dundurs J, Barber JR. Erratum: “Planar Hertz Contact With Heat Conduction” (Journal of Applied Mechanics, 1981, 48, pp. 549–554) Journal of Applied Mechanics. 49: 468-468. DOI: 10.1115/1.3162199  0.31
1982 Comninou M, Barber JR, Dundurs J. Disturbance at a frictional interface caused by a plane elastic pulse Trans. Asme J. Appl. Mech.. 49: 361-365. DOI: 10.1115/1.3162094  0.338
1982 Barber JR, Comninou M. The external axisymmetric interface crack with heat flow Quarterly Journal of Mechanics and Applied Mathematics. 35: 403-417. DOI: 10.1093/Qjmam/35.3.403  0.397
1982 Barber JR. Indentation of an elastic half-space by a cooled flat punch Quarterly Journal of Mechanics and Applied Mathematics. 35: 141-154. DOI: 10.1093/Qjmam/35.1.141  0.454
1982 Barber JR, Martin-Moran CJ. Green's functions for transient thermoelastic contact problems for the half-plane Wear. 79: 11-19. DOI: 10.1016/0043-1648(82)90200-9  0.423
1982 Barber JR, Comninou M. Rolling of elastic cylinders with friction at supersonic speed International Journal of Solids and Structures. 18: 783-789. DOI: 10.1016/0020-7683(82)90035-X  0.411
1982 Barber JR, Comninou M, Dundurs J. Contact transmission of wave motion between two solids with an initial gap International Journal of Solids and Structures. 18: 775-781. DOI: 10.1016/0020-7683(82)90034-8  0.323
1981 Comninou M, Barber JR, Dundurs J. HEAT CONDUCTION THROUGH A FLAT PUNCH Journal of Applied Mechanics, Transactions Asme. 48: 871-880. DOI: 10.1115/1.3157748  0.381
1981 Comninou M, Dundurs J, Barber JR. PLANAR HERTZ CONTACT WITH HEAT CONDUCTION Journal of Applied Mechanics, Transactions Asme. 48: 549-554. DOI: 10.1115/1.3157672  0.374
1981 Barber JR. Stability of thermoelastic contact for the Aldo model Trans. Asme J. Appl. Mech.. 48.  0.312
1980 Barber JR. SOME IMPLICATIONS OF DUNDURS' THEOREM FOR THERMOELASTIC CONTACT AND CRACK PROBLEMS Journal of Mechanical Engineering Science. 22: 229-232. DOI: 10.1243/Jmes_Jour_1980_022_044_02  0.377
1980 Barber JR. The Rolling Contact of Misaligned Elastic Cylinders Archive: Journal of Mechanical Engineering Science 1959-1982 (Vols 1-23). 22: 125-128. DOI: 10.1243/Jmes_Jour_1980_022_026_02  0.405
1980 Maw N, Barber JR, Fawcett JN. The role of elastic tangential compliance in oblique impact . DOI: 10.1115/1.3251617  0.343
1980 Barber JR. STABILITY OF THERMOELASTIC CONTACT FOR THE ALDO MODEL American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 39: 109-117. DOI: 10.1115/1.3157673  0.399
1980 Barber JR, Dundurs J, Comninou M. STABILITY CONSIDERATIONS IN THERMOELASTIC CONTACT Journal of Applied Mechanics, Transactions Asme. 47: 871-874. DOI: 10.1115/1.3153805  0.382
1980 Barber JR. Steady-state thermal stresses caused by an imperfectly conducting penny-shaped crack in an elastic solid Journal of Thermal Stresses. 3: 77-83. DOI: 10.1080/01495738008926954  0.31
1980 Barber JR. The transient thermoelastic contact of a sphere sliding on a plane Wear. 59: 21-29. DOI: 10.1016/0043-1648(80)90267-7  0.436
1979 Barber JR. Bending of an incomplete annular plate and related problems The Journal of Strain Analysis For Engineering Design. 14: 103-109. DOI: 10.1243/03093247V143103  0.384
1979 Barber JR. Adhesive contact during the oblique impact of elastic spheres Zeitschrift FüR Angewandte Mathematik Und Physik Zamp. 30: 468-476. DOI: 10.1007/Bf01588891  0.368
1978 Barber JR. Force and displacement influence functions for the circular ring The Journal of Strain Analysis For Engineering Design. 13: 77-81. DOI: 10.1243/03093247V132077  0.328
1978 Barber JR. Contact problems involving a cooled punch Journal of Elasticity. 8: 409-423. DOI: 10.1007/Bf00049190  0.432
1977 Maw N, Barber JR, Fawcett JN. The rebound of elastic bodies in oblique impact Mechanics Research Communications. 4: 17-22. DOI: 10.1016/0093-6413(77)90045-3  0.357
1976 Barber JR. Some thermoelastic contact problems involving frictional heating Quarterly Journal of Mechanics and Applied Mathematics. 29: 1-13. DOI: 10.1093/Qjmam/29.1.1  0.461
1976 Maw N, Barber JR, Fawcett JN. The oblique impact of elastic spheres Wear. 38: 101-114. DOI: 10.1016/0043-1648(76)90201-5  0.402
1976 Barber JR. The effect of heat flow on the contact area between a continuous rigid punch and a frictionless elastic half-space Zeitschrift FüR Angewandte Mathematik Und Physik Zamp. 27: 439-445. DOI: 10.1007/Bf01594900  0.369
1976 Barber JR. Indentation of the semi-infinite elastic solid by a concave rigid punch Journal of Elasticity. 6: 149-159. DOI: 10.1007/Bf00041783  0.431
1975 Barber JR. Steady-state thermal stresses in an elastic solid containing an insulated penny-shaped crack The Journal of Strain Analysis For Engineering Design. 10: 19-24. DOI: 10.1243/03093247V101019  0.396
1975 BARBER JR. THERMOELASTIC CONTACT OF A ROTATING SPHERE AND A HALF-SPACE Wear. 35. DOI: 10.1016/0043-1648(75)90076-9  0.412
1975 Barber JR. The penny-shaped crack in shear and related contact problems International Journal of Engineering Science. 13: 815-829. DOI: 10.1016/0020-7225(75)90082-8  0.404
1975 Barber JR. THERMOELASTIC CONTACT PROBLEMS . 177-190.  0.301
1974 Barber JR. Determining the contact area in elastic-indentation problems The Journal of Strain Analysis For Engineering Design. 9: 230-232. DOI: 10.1243/03093247V094230  0.392
1974 Barber JR. Some mixed boundary value problems for the semi-infinite elastic solid subjected to tangential surface tractions International Journal of Mechanical Sciences. 16: 727-734. DOI: 10.1016/0020-7403(74)90098-8  0.394
1973 Barber JR. Indentation of the semi-infinite elastic solid by a hot sphere International Journal of Mechanical Sciences. 15: 813-819. DOI: 10.1016/0020-7403(73)90070-2  0.444
1972 Barber JR. Distortion of the semi-infinite solid due to transient surface heating International Journal of Mechanical Sciences. 14: 377-393. DOI: 10.1016/0020-7403(72)90080-X  0.414
1971 Barber JR. The solution of heated punch problems by point source methods International Journal of Engineering Science. 9: 1165-1170. DOI: 10.1016/0020-7225(71)90081-4  0.425
1971 Barber JR. The effect of thermal distortion on constriction resistance International Journal of Heat and Mass Transfer. 14: 751-766. DOI: 10.1016/0017-9310(71)90105-0  0.383
1971 Barber JR. Letter concerning the paper "thermal contact resistance-the directional effect and other problems" International Journal of Heat and Mass Transfer. 14: 331-332. DOI: 10.1016/0017-9310(71)90098-6  0.344
1970 Barber JR. The conduction of heat from sliding solids International Journal of Heat and Mass Transfer. 13: 857-869. DOI: 10.1016/0017-9310(70)90131-6  0.369
1969 Barber JR. Thermoelastic Instabilities in the Sliding of Comforming Solids Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 312: 381-394. DOI: 10.1098/Rspa.1969.0165  0.373
1967 Barber JR. Distribution of Heat between Sliding Surfaces Archive: Journal of Mechanical Engineering Science 1959-1982 (Vols 1-23). 9: 351-354. DOI: 10.1243/Jmes_Jour_1967_009_054_02  0.355
1967 Barber JR. The influence of thermal expansion on the friction and wear process Wear. 10: 155-159. DOI: 10.1016/0043-1648(67)90087-7  0.37
1967 Barber JR, Wright K. The thermal distortion due to a uniform circular heat source on the surface of a semi-infinite solid International Journal of Mechanical Sciences. 9: 811-815. DOI: 10.1016/0020-7403(67)90009-4  0.322
Show low-probability matches.