Year |
Citation |
Score |
2020 |
Mikhaeel MMK, Jacobi AM. Using Thermodynamic Availability to Predict the Transitional Film Reynolds Number between the Jet and Sheet Modes in Falling Liquid between Horizontal Tubes International Journal of Heat and Mass Transfer. 161: 120246. DOI: 10.1016/J.Ijheatmasstransfer.2020.120246 |
0.372 |
|
2019 |
Kim HJ, Liebenberg L, Jacobi AM. Flow visualization of two-phase R-245fa at low mass flux in a plate heat exchanger near the micro-macroscale transition Science and Technology For the Built Environment. 25: 1292-1301. DOI: 10.1080/23744731.2019.1648980 |
0.43 |
|
2019 |
Kwon B, Liebenberg L, Jacobi AM, King WP. Heat transfer enhancement of internal laminar flows using additively manufactured static mixers International Journal of Heat and Mass Transfer. 137: 292-300. DOI: 10.1016/J.Ijheatmasstransfer.2019.03.133 |
0.567 |
|
2019 |
Kwon B, Maniscalco NI, Jacobi AM, King WP. High power density two-phase cooling in microchannel heat exchangers Applied Thermal Engineering. 148: 1271-1277. DOI: 10.1016/J.Applthermaleng.2018.11.123 |
0.465 |
|
2019 |
Davies WA, Kang Y, Hrnjak P, Jacobi AM. Heat transfer and flow regimes in large flattened-tube steam condensers Applied Thermal Engineering. 148: 722-733. DOI: 10.1016/J.Applthermaleng.2018.11.079 |
0.556 |
|
2019 |
Davies WA, Kang Y, Hrnjak P, Jacobi AM. Effect of inclination on heat transfer and flow regimes in large flattened-tube steam condensers Applied Thermal Engineering. 148: 999-1006. DOI: 10.1016/J.Applthermaleng.2018.11.078 |
0.55 |
|
2018 |
Jin Kim H, Liebenberg L, Jacobi AM. Convective Boiling of R-134a Near the Micro-Macroscale Transition Inside a Vertical Brazed Plate Heat Exchanger Journal of Heat Transfer. 140. DOI: 10.1115/1.4039397 |
0.558 |
|
2018 |
Kwon B, Maniscalco NI, Jacobi AM, King WP. High power density air-cooled microchannel heat exchanger International Journal of Heat and Mass Transfer. 118: 1276-1283. DOI: 10.1016/J.Ijheatmasstransfer.2017.11.068 |
0.53 |
|
2018 |
Khovalyg D, Hrnjak P, Jacobi A. Heat flux variation between neighboring channels in compact minichannel heat exchangers Applied Thermal Engineering. 135: 418-434. DOI: 10.1016/J.Applthermaleng.2018.02.079 |
0.457 |
|
2018 |
Davies WA, Kang Y, Hrnjak P, Jacobi AM. Method for evaluating the effect of inclination on the performance of large flattened-tube steam condensers with visualization of flow regimes Applied Thermal Engineering. 138: 934-941. DOI: 10.1016/J.Applthermaleng.2018.02.075 |
0.533 |
|
2018 |
Edalatpour M, Liu L, Jacobi A, Eid K, Sommers A. Managing water on heat transfer surfaces: A critical review of techniques to modify surface wettability for applications with condensation or evaporation Applied Energy. 222: 967-992. DOI: 10.1016/J.Apenergy.2018.03.178 |
0.745 |
|
2017 |
Ji W, Jacobi AM, He Y, Tao W. Summary and evaluation on the heat transfer enhancement techniques of gas laminar and turbulent pipe flow International Journal of Heat and Mass Transfer. 111: 467-483. DOI: 10.1016/J.Ijheatmasstransfer.2017.03.080 |
0.473 |
|
2017 |
Kang Y, Davies III WA, Hrnjak P, Jacobi AM. Effect of inclination on pressure drop and flow regimes in large flattened-tube steam condensers Applied Thermal Engineering. 123: 498-513. DOI: 10.1016/J.Applthermaleng.2017.05.062 |
0.455 |
|
2017 |
Nawaz K, Bock J, Jacobi AM. Thermal-hydraulic performance of metal foam heat exchangers under dry operating conditions Applied Thermal Engineering. 119: 222-232. DOI: 10.1016/J.Applthermaleng.2017.03.056 |
0.519 |
|
2017 |
Yang J, Jacobi A, Liu W. Heat transfer correlations for single-phase flow in plate heat exchangers based on experimental data Applied Thermal Engineering. 113: 1547-1557. DOI: 10.1016/J.Applthermaleng.2016.10.147 |
0.572 |
|
2016 |
Khovalyg D, Hrnjak PS, Jacobi AM. Interactions Between Parallel Unevenly Heated Minichannels During Flow Boiling of R134A Heat Transfer Engineering. 1-17. DOI: 10.1080/01457632.2015.1097954 |
0.409 |
|
2016 |
Zhang F, Jacobi AM. Aluminum surface wettability changes by pool boiling of nanofluids Colloids and Surfaces a: Physicochemical and Engineering Aspects. 506: 438-444. DOI: 10.1016/J.Colsurfa.2016.07.026 |
0.462 |
|
2015 |
Weisensee PB, Neelakantan NK, Suslick KS, Jacobi AM, King WP. Impact of air and water vapor environments on the hydrophobicity of surfaces. Journal of Colloid and Interface Science. 453: 177-85. PMID 25985421 DOI: 10.1016/J.Jcis.2015.04.060 |
0.508 |
|
2015 |
Yu R, Jacobi AM. Water-repellent slippery surfaces for HVAC&R systems Asme 2015 Conference On Smart Materials, Adaptive Structures and Intelligent Systems, Smasis 2015. 1. DOI: 10.1115/SMASIS2015-9065 |
0.438 |
|
2015 |
Khovalyg DM, Hrnjak PS, Jacobi AM. Transient pressure drop cross-correlation during flow boiling of R134a in parallel minichannels Science and Technology For the Built Environment. 21: 545-554. DOI: 10.1080/23744731.2015.1040339 |
0.36 |
|
2015 |
Rahman MA, Jacobi AM. Experimental study on frosting/defrosting characteristics of microgrooved metal surfaces International Journal of Refrigeration. 50: 44-56. DOI: 10.1016/J.Ijrefrig.2014.11.002 |
0.377 |
|
2015 |
Ji WT, Jacobi AM, He YL, Tao WQ. Summary and evaluation on single-phase heat transfer enhancement techniques of liquid laminar and turbulent pipe flow International Journal of Heat and Mass Transfer. 88: 735-754. DOI: 10.1016/J.Ijheatmasstransfer.2015.04.008 |
0.521 |
|
2015 |
Shen C, Cirone C, Jacobi AM, Wang X. Fouling of enhanced tubes for condensers used in cooling tower systems: A literature review Applied Thermal Engineering. 79: 74-87. DOI: 10.1016/J.Applthermaleng.2015.01.014 |
0.482 |
|
2014 |
Kang HC, Cho H, Kim JH, Jacobi AM. Air-side heat transfer performance of louver fin and multitube heat exchanger for direct methanol fuel cell cooling application Journal of Fuel Cell Science and Technology. 11. DOI: 10.1115/1.4026955 |
0.579 |
|
2014 |
Weisensee PB, Torrealba EJ, Raleigh M, Jacobi AM, King WP. Hydrophobic and oleophobic re-entrant steel microstructures fabricated using micro electrical discharge machining Journal of Micromechanics and Microengineering. 24. DOI: 10.1088/0960-1317/24/9/095020 |
0.345 |
|
2014 |
Rahman MA, Jacobi AM. Experimental investigation of wetting anisotropy on microgrooved brass surfaces Procedia Engineering. 90: 611-617. DOI: 10.1016/J.Proeng.2014.11.780 |
0.392 |
|
2014 |
Wang X, Jacobi AM. A thermodynamic basis for predicting falling-film mode transitions International Journal of Refrigeration. 43: 123-132. DOI: 10.1016/J.Ijrefrig.2014.04.002 |
0.35 |
|
2014 |
El Cheikh A, Jacobi A. A mathematical model for frost growth and densification on flat surfaces International Journal of Heat and Mass Transfer. 77: 604-611. DOI: 10.1016/J.Ijheatmasstransfer.2014.05.054 |
0.491 |
|
2014 |
Yang J, Fan A, Liu W, Jacobi AM. Optimization of shell-and-tube heat exchangers conforming to TEMA standards with designs motivated by constructal theory Energy Conversion and Management. 78: 468-476. DOI: 10.1016/J.Enconman.2013.11.008 |
0.448 |
|
2014 |
Yang J, Ma L, Bock J, Jacobi AM, Liu W. A comparison of four numerical modeling approaches for enhanced shell-and-tube heat exchangers with experimental validation Applied Thermal Engineering. 65: 369-383. DOI: 10.1016/J.Applthermaleng.2014.01.035 |
0.486 |
|
2014 |
Rahman MA, Jacobi AM. Study of frost properties and frost melt water drainage on microgrooved brass surfaces in multiple frost/defrost/refrost cycles Applied Thermal Engineering. 64: 453-461. DOI: 10.1016/J.Applthermaleng.2013.11.062 |
0.42 |
|
2014 |
Zhang F, Bock J, Jacobi AM, Wu H. Simultaneous heat and mass transfer to air from a compact heat exchanger with water spray precooling and surface deluge cooling Applied Thermal Engineering. 63: 528-540. DOI: 10.1016/J.Applthermaleng.2013.11.046 |
0.616 |
|
2014 |
He J, Liu L, Jacobi AM. Experimental and numerical investigation of surface convection enhancement by a V-formation delta-winglet array in a developing channel flow Ashrae Transactions. 120: 107-117. |
0.439 |
|
2013 |
Wang XF, Hrnjak PS, Elbel S, Jacobi AM, He MG. Heat transfer performance for a falling-film on horizontal flat tubes Journal of Heat Transfer. 135. DOI: 10.1115/1.4023689 |
0.524 |
|
2013 |
Rahman MA, Jacobi AM. Condensation, frost formation, and frost melt-water retention characteristics on microgrooved brass surfaces under natural convection Heat Transfer Engineering. 34: 1147-1155. DOI: 10.1080/01457632.2013.776453 |
0.391 |
|
2013 |
Wang X, Rahman MA, Jacobi AM, Hrnjak RS. Dynamic wetting behavior and water drops on microgrooved surfaces Heat Transfer Engineering. 34: 1088-1098. DOI: 10.1080/01457632.2013.763544 |
0.464 |
|
2013 |
Wang X, He M, Lv K, Fan H, Jacobi AM. Effects of liquid supply method on falling-film mode transitions on horizontal tubes Heat Transfer Engineering. 34: 562-579. DOI: 10.1080/01457632.2013.730398 |
0.352 |
|
2013 |
Bock J, Jacobi AM. Geometric classification of open-cell metal foams using X-ray micro-computed tomography Materials Characterization. 75: 35-43. DOI: 10.1016/J.Matchar.2012.10.001 |
0.324 |
|
2013 |
Zhong Y, Jacobi AM, Georgiadis JG. Effects of surface chemistry and groove geometry on wetting characteristics and droplet motion of water condensate on surfaces with rectangular microgrooves International Journal of Heat and Mass Transfer. 57: 629-641. DOI: 10.1016/J.Ijheatmasstransfer.2012.10.056 |
0.72 |
|
2013 |
Rahman MA, Jacobi AM. Effects of microgroove geometry on the early stages of frost formation and frost properties Applied Thermal Engineering. 56: 91-100. DOI: 10.1016/J.Applthermaleng.2013.02.037 |
0.347 |
|
2013 |
Banerjee S, Jacobi AM. Transmission loss analysis of single-inlet/double-outlet (SIDO) and double-inlet/single-outlet (DISO) circular chamber mufflers by using Green's function method Applied Acoustics. 74: 1499-1510. DOI: 10.1016/J.Apacoust.2013.06.007 |
0.311 |
|
2012 |
Rahman MA, Jacobi AM. Wetting behavior and drainage of water droplets on microgrooved brass surfaces. Langmuir : the Acs Journal of Surfaces and Colloids. 28: 13441-51. PMID 22909187 DOI: 10.1021/La302669G |
0.375 |
|
2012 |
Ruan B, Jacobi AM. Ultrasonication effects on thermal and rheological properties of carbon nanotube suspensions. Nanoscale Research Letters. 7: 127. PMID 22333487 DOI: 10.1186/1556-276X-7-127 |
0.346 |
|
2012 |
Bock JJ, Jacobi AM. X-ray micro-computed tomography imaging of open-cell metal foams Journal of Heat Transfer. 134. DOI: 10.1115/1.4006725 |
0.38 |
|
2012 |
Rahman MA, Jacobi AM. Wetting, Frost Formation and Melt Water Retention Pattern on Microgrooved Surfaces Journal of Heat Transfer. 134. DOI: 10.1115/1.4006721 |
0.316 |
|
2012 |
Wang X, Hrnjak PS, Elbel S, Jacobi AM, He M. Flow modes and mode transitions for falling films on flat tubes Journal of Heat Transfer. 134. DOI: 10.1115/1.4005095 |
0.311 |
|
2012 |
Han XH, Wang Q, Park YG, T'Joen C, Sommers A, Jacobi A. A review of metal foam and metal matrix composites for heat exchangers and heat sinks Heat Transfer Engineering. 33: 991-1009. DOI: 10.1080/01457632.2012.659613 |
0.762 |
|
2012 |
Liu L, Kim ES, Park YG, Jacobi AM. The potential impact of nanofluid enhancements on the performance of heat exchangers Heat Transfer Engineering. 33: 31-41. DOI: 10.1080/01457632.2011.584814 |
0.549 |
|
2012 |
Dai Z, Nawaz K, Park Y, Chen Q, Jacobi AM. A comparison of metal-foam heat exchangers to compact multilouver designs for air-side heat transfer applications Heat Transfer Engineering. 33: 21-30. DOI: 10.1080/01457632.2011.584812 |
0.675 |
|
2012 |
Yao CW, Garvin TP, Alvarado JL, Jacobi AM, Jones BG, Marsh CP. Droplet contact angle behavior on a hybrid surface with hydrophobic and hydrophilic properties Applied Physics Letters. 101. DOI: 10.1063/1.4752470 |
0.383 |
|
2012 |
Wang Q, Han XH, Sommers A, Park Y, T'Joen C, Jacobi A. A review on application of carbonaceous materials and carbon matrix composites for heat exchangers and heat sinks International Journal of Refrigeration. 35: 7-26. DOI: 10.1016/J.Ijrefrig.2011.09.001 |
0.803 |
|
2012 |
Ruan B, Jacobi AM. Heat transfer characteristics of multiwall carbon nanotube suspensions (MWCNT nanofluids) in intertube falling-film flow International Journal of Heat and Mass Transfer. 55: 3186-3195. DOI: 10.1016/J.Ijheatmasstransfer.2012.02.051 |
0.537 |
|
2012 |
Rahman MA, Jacobi AM. Drainage of frost melt water from vertical brass surfaces with parallel microgrooves International Journal of Heat and Mass Transfer. 55: 1596-1605. DOI: 10.1016/J.Ijheatmasstransfer.2011.11.015 |
0.423 |
|
2011 |
Kang HC, Jacobi AM. Equilibrium contact angles of liquid droplets on ideal rough solids. Langmuir : the Acs Journal of Surfaces and Colloids. 27: 14910-8. PMID 22053925 DOI: 10.1021/La2031413 |
0.39 |
|
2011 |
He J, Liu L, Jacobi AM. Conjugate thermal analysis of air-cooled discrete flush-mounted heat sources in a horizontal channel Journal of Electronic Packaging, Transactions of the Asme. 133. DOI: 10.1115/1.4005299 |
0.558 |
|
2011 |
He J, Jacobi AM. Investigation of surface convection enhancement by a V-formation winglet array using infrared thermography Journal of Heat Transfer. 133. DOI: 10.1115/1.4003896 |
0.336 |
|
2011 |
He J, Liu L, Jacobi AM. Numerical and experimental investigation of laminar channel flow with a transparent wall Journal of Heat Transfer. 133. DOI: 10.1115/1.4003547 |
0.544 |
|
2011 |
Ruan B, Jacobi AM. Investigation on intertube falling-film heat transfer and mode transitions of aqueous-alumina nanofluids Journal of Heat Transfer. 133. DOI: 10.1115/1.4002980 |
0.475 |
|
2011 |
Park YG, Jacobi AM. A simple air-side data analysis method for partially wet flat-tube heat exchangers Heat Transfer Engineering. 32: 133-140. DOI: 10.1080/01457631003769211 |
0.574 |
|
2011 |
Ruan B, Jacobi AM. Intertube falling-film heat transfer behavior of multiwall carbon nanotube suspensions (MWCNT nanofluids) Asme/Jsme 2011 8th Thermal Engineering Joint Conference, Ajtec 2011. |
0.377 |
|
2011 |
Meng L, Jacobi AM. Optimization of polymer tube-bundle heat exchangers using a genetic algorithm Asme 2011 International Mechanical Engineering Congress and Exposition, Imece 2011. 1: 621-631. |
0.441 |
|
2011 |
Shi J, Jacobi AM, Chen Z. Experimental study of subcooled pool boiling heat transfer on metal foam Asme 2011 International Mechanical Engineering Congress and Exposition, Imece 2011. 10: 559-564. |
0.398 |
|
2010 |
Zhong Y, Jacobi AM, Georgiadis JG. Freezing front propagation on microgrooved substrates Journal of Thermophysics and Heat Transfer. 24: 199-207. DOI: 10.2514/1.46456 |
0.737 |
|
2010 |
Ruan B, Jacobi AM, Li L. Heat transfer of falling film flowing around a horizontal tube with nanofluids Proceedings of the Asme Micro/Nanoscale Heat and Mass Transfer International Conference 2009, Mnhmt2009. 3: 643-652. DOI: 10.1115/MNHMT2009-18553 |
0.469 |
|
2010 |
He J, Jacobi AM. Conjugate mixed convection with surface radiation and substrate conduction in laminar channel flow with discrete flush-mounted heat sources Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 4: 23-30. DOI: 10.1115/IMECE2010-40471 |
0.394 |
|
2010 |
He J, Jacobi AM. Conjugate mixed convection with surface radiation and substrate conduction in laminar channel flow with discrete flush mounted heat sources Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 4: 227-234. DOI: 10.1115/IMECE2010-39916 |
0.394 |
|
2010 |
Gupta D, Park YG, Jacobi AM. An experimental study of condensate retention on the air side of flat-tube heat exchangers 2010 14th International Heat Transfer Conference, Ihtc 14. 2: 227-234. DOI: 10.1115/IHTC14-22986 |
0.451 |
|
2010 |
He J, Liu L, Jacobi AM. Air-side heat-transfer enhancement by a new winglet-type vortex generator array in a plain-fin round-tube heat exchanger Journal of Heat Transfer. 132: 1-9. DOI: 10.1115/1.4000988 |
0.571 |
|
2010 |
Xia Y, Jacobi AM. A model for predicting the thermal-hydraulic performance of louvered-fin, flat-tube heat exchangers under frosting conditions International Journal of Refrigeration. 33: 321-333. DOI: 10.1016/J.Ijrefrig.2009.09.021 |
0.644 |
|
2010 |
Henderson K, Park YG, Liu L, Jacobi AM. Flow-boiling heat transfer of R-134a-based nanofluids in a horizontal tube International Journal of Heat and Mass Transfer. 53: 944-951. DOI: 10.1016/J.Ijheatmasstransfer.2009.11.026 |
0.336 |
|
2010 |
Dai Z, Nawaz K, Park YG, Bock J, Jacobi AM. Correcting and extending the Boomsma-Poulikakos effective thermal conductivity model for three-dimensional, fluid-saturated metal foams International Communications in Heat and Mass Transfer. 37: 575-580. DOI: 10.1016/J.Icheatmasstransfer.2010.01.015 |
0.406 |
|
2010 |
Park YG, Liu L, Jacobi AM. Rational approaches for combining redundant, independent measurements to minimize combined experimental uncertainty Experimental Thermal and Fluid Science. 34: 720-724. DOI: 10.1016/J.Expthermflusci.2010.01.001 |
0.434 |
|
2010 |
Sommers A, Wang Q, Han X, T'Joen C, Park Y, Jacobi A. Ceramics and ceramic matrix composites for heat exchangers in advanced thermal systems-A review Applied Thermal Engineering. 30: 1277-1291. DOI: 10.1016/J.Applthermaleng.2010.02.018 |
0.802 |
|
2009 |
He J, Liu L, Jacobi AM. Air-side heat transfer enhancement by a novel winglet-type vortex generator array in around-tube plain-fin heat exchanger Proceedings of the Asme Summer Heat Transfer Conference 2009, Ht2009. 1: 575-582. DOI: 10.1115/HT2009-88164 |
0.47 |
|
2009 |
Park YG, Jacobi AM. The air-side thermal-hydraulic performance of flat-tube heat exchangers with louvered, wavy, and plain fins under dry and wet conditions Journal of Heat Transfer. 131: 1-13. DOI: 10.1115/1.3089548 |
0.563 |
|
2009 |
Park YG, Jacobi AM. Air-side heat transfer and friction correlations for flat-tube louver-fin heat exchangers Journal of Heat Transfer. 131: 1-12. DOI: 10.1115/1.3000609 |
0.543 |
|
2009 |
Liu L, Jacobi AM. Air-Side surface wettability effects on the performance of slit-fin-and-tube heat exchangers operating under wet-surface conditions Journal of Heat Transfer. 131: 1-9. DOI: 10.1115/1.2994722 |
0.611 |
|
2009 |
Liu L, Jacobi AM, Chvedov D. A surface embossing technique to create micro-grooves on an aluminum fin stock for drainage enhancement Journal of Micromechanics and Microengineering. 19. DOI: 10.1088/0960-1317/19/3/035026 |
0.482 |
|
2009 |
T'Joen C, Park Y, Wang Q, Sommers A, Han X, Jacobi A. A review on polymer heat exchangers for HVAC&R applications International Journal of Refrigeration. 32: 763-779. DOI: 10.1016/J.Ijrefrig.2008.11.008 |
0.749 |
|
2009 |
Ruan B, Jacobi AM, Li L. Effects of a countercurrent gas flow on falling-film mode transitions between horizontal tubes Experimental Thermal and Fluid Science. 33: 1216-1225. DOI: 10.1016/J.Expthermflusci.2009.07.009 |
0.342 |
|
2009 |
T’Joen C, Jacobi A, De Paepe M. Flow visualisation in inclined louvered fins Experimental Thermal and Fluid Science. 33: 664-674. DOI: 10.1016/J.Expthermflusci.2009.01.003 |
0.387 |
|
2009 |
Park JS, Jacobi AM. A run-around heat exchanger system to improve the energy efficiency of a home appliance using hot water Applied Thermal Engineering. 29: 3110-3117. DOI: 10.1016/J.Applthermaleng.2009.04.005 |
0.465 |
|
2009 |
Sommers AD, Jacobi AM. Modeling the retention of water droplets on topographically-modified, micro-grooved aluminum 2008 Proceedings of the Asme Summer Heat Transfer Conference, Ht 2008. 2: 317-326. |
0.699 |
|
2008 |
Sommers AD, Jacobi AM. Wetting phenomena on micro-grooved aluminum surfaces and modeling of the critical droplet size. Journal of Colloid and Interface Science. 328: 402-11. PMID 18930243 DOI: 10.1016/J.Jcis.2008.09.023 |
0.721 |
|
2008 |
Joardar A, Jacobi AM. Heat transfer enhancement by winglet-type vortex generator arrays in compact plain-fin-and-tube heat exchangers International Journal of Refrigeration. 31: 87-97. DOI: 10.1016/J.Ijrefrig.2007.04.011 |
0.817 |
|
2008 |
Liu L, Jacobi AM. Issues affecting the reliability of dynamic dip testing as a method to assess the condensate drainage behavior from the air-side surface of dehumidifying heat exchangers Experimental Thermal and Fluid Science. 32: 1512-1522. DOI: 10.1016/J.Expthermflusci.2008.04.006 |
0.464 |
|
2007 |
Joardar A, Jacobi AM. A numerical study of flow and heat transfer enhancement using an array of delta-winglet vortex generators in a fin-and-tube heat exchanger Journal of Heat Transfer. 129: 1156-1167. DOI: 10.1115/1.2740308 |
0.807 |
|
2007 |
Michna GJ, Jacobi AM, Burton RL. An experimental study of the friction factor and mass transfer performance of an offset-strip fin array at very high Reynolds numbers Journal of Heat Transfer. 129: 1134-1140. DOI: 10.1115/1.2739599 |
0.774 |
|
2007 |
Lee JJ, Dutton JC, Jacobi AM. Application of temperature-sensitive paint for surface temperature measurement in heat transfer enhancement applications Journal of Mechanical Science and Technology. 21: 1253-1262. DOI: 10.1007/Bf03179042 |
0.49 |
|
2006 |
ElSherbini AI, Jacobi AM. Retention forces and contact angles for critical liquid drops on non-horizontal surfaces. Journal of Colloid and Interface Science. 299: 841-9. PMID 16542670 DOI: 10.1016/J.Jcis.2006.02.018 |
0.791 |
|
2006 |
ElSherbini AI, Jacobi AM. A model for condensate retention on plain-fin heat exchangers Journal of Heat Transfer. 128: 427-433. DOI: 10.1115/1.2175091 |
0.843 |
|
2006 |
Sommers AD, Jacobi AM. An exact solution to steady heat conduction in a two-dimensional annulus on a one-dimensional fin: Application to frosted heat exchangers with round tubes Journal of Heat Transfer. 128: 397-404. DOI: 10.1115/1.2165210 |
0.735 |
|
2006 |
Sommers AD, Jacobi AM. Creating micro-scale surface topology to achieve anisotropic wettability on an aluminum surface Journal of Micromechanics and Microengineering. 16: 1571-1578. DOI: 10.1088/0960-1317/16/8/018 |
0.738 |
|
2006 |
Xia Y, Zhong Y, Hrnjak PS, Jacobi AM. Frost, defrost, and refrost and its impact on the air-side thermal-hydraulic performance of louvered-fin, flat-tube heat exchangers International Journal of Refrigeration. 29: 1066-1079. DOI: 10.1016/J.Ijrefrig.2006.03.005 |
0.737 |
|
2005 |
Sommers AD, Jacobi AM. Air-side heat transfer enhancement of a refrigerator evaporator using vortex generation International Journal of Refrigeration. 28: 1006-1017. DOI: 10.1016/J.Ijrefrig.2005.04.003 |
0.798 |
|
2005 |
Ribatski G, Jacobi AM. Falling-film evaporation on horizontal tubes - A critical review International Journal of Refrigeration. 28: 635-653. DOI: 10.1016/J.Ijrefrig.2004.12.002 |
0.476 |
|
2005 |
Mina EM, Newell TA, Jacobi AM. A generalized coefficient of performance for conditioning moist air International Journal of Refrigeration. 28: 784-790. DOI: 10.1016/J.Ijrefrig.2004.09.015 |
0.332 |
|
2005 |
Xia Y, Jacobi AM. Air-side data interpretation and performance analysis for heat exchangers with simultaneous heat and mass transfer: Wet and frosted surfaces International Journal of Heat and Mass Transfer. 48: 5089-5102. DOI: 10.1016/J.Ijheatmasstransfer.2005.08.008 |
0.659 |
|
2005 |
Joardar A, Jacobi AM. Impact of leading edge delta-wing vortex generators on the thermal performance of a flat tube, louvered-fin compact heat exchanger International Journal of Heat and Mass Transfer. 48: 1480-1493. DOI: 10.1016/J.Ijheatmasstransfer.2004.10.018 |
0.816 |
|
2005 |
Zhong Y, Joardar A, Gu Z, Park YG, Jacobi AM. Dynamic dip testing as a method to assess the condensate drainage behavior from the air-side surface of compact heat exchangers Experimental Thermal and Fluid Science. 29: 957-970. DOI: 10.1016/J.Expthermflusci.2005.01.006 |
0.817 |
|
2005 |
Xia Y, Hrnjak PS, Jacobi AM. Air-side thermal-hydraulic performance of louvered-fin, flat-tube heat exchangers with sequential frost-growth cycles Ashrae Transactions. 111: 487-495. |
0.414 |
|
2004 |
ElSherbini AI, Jacobi AM. Liquid drops on vertical and inclined surfaces; II. A method for approximating drop shapes. Journal of Colloid and Interface Science. 273: 566-75. PMID 15082395 DOI: 10.1016/J.Jcis.2003.12.043 |
0.795 |
|
2004 |
ElSherbini AI, Jacobi AM. Liquid drops on vertical and inclined surfaces; I. An experimental study of drop geometry. Journal of Colloid and Interface Science. 273: 556-65. PMID 15082394 DOI: 10.1016/J.Jcis.2003.12.067 |
0.797 |
|
2004 |
Hoke JL, Georgiadis JG, Jacobi AM. Effect of substrate wettability on frost properties Journal of Thermophysics and Heat Transfer. 18: 228-235. DOI: 10.2514/1.10176 |
0.734 |
|
2004 |
Elsherbini AI, Jacobi AM. Condensate retention model for plain-fin heat exchangers Proceedings of the Asme Heat Transfer/Fluids Engineering Summer Conference 2004, Ht/Fed 2004. 3: 203-210. DOI: 10.1115/Ht-Fed2004-56559 |
0.844 |
|
2004 |
Xia Y, Jacobi AM. An exact solution to steady heat conduction in a two-dimensional slab on a one-dimensional fin: Application to frosted heat exchangers International Journal of Heat and Mass Transfer. 47: 3317-3326. DOI: 10.1016/J.Ijheatmasstransfer.2004.01.019 |
0.508 |
|
2004 |
Dupont V, Thome JR, Jacobi AM. Heat transfer model for evaporation in microchannels. Part II: Comparison with the database International Journal of Heat and Mass Transfer. 47: 3387-3401. DOI: 10.1016/J.Ijheatmasstransfer.2004.01.007 |
0.526 |
|
2004 |
Thome JR, Dupont V, Jacobi AM. Heat transfer model for evaporation in microchannels. Part I: Presentation of the model International Journal of Heat and Mass Transfer. 47: 3375-3385. DOI: 10.1016/J.Ijheatmasstransfer.2004.01.006 |
0.546 |
|
2004 |
ElSherbini AI, Jacobi AM. Critical contact angles for liquid drops on inclined surfaces Progress in Colloid and Polymer Science. 128: 57-62. DOI: 10.1007/B97081 |
0.79 |
|
2004 |
Brown KA, Zhong Y, Michna GJ, Jacobi AM, Burton RL. Enhancing heavy lift booster performance by exploiting zeotropic condensation of air 40th Aiaa/Asme/Sae/Asee Joint Propulsion Conference and Exhibit. |
0.735 |
|
2004 |
Michna GJ, Yongfang Zhong, Brown KA, Jacobi AM, Burton RL. Experimental verification of ultra-high-performance, advanced-propulsion heat exchangers 40th Aiaa/Asme/Sae/Asee Joint Propulsion Conference and Exhibit. |
0.807 |
|
2003 |
Smotrys ML, Ge H, Jacobi AM, Dutton JC. Flow and heat transfer behavior for a vortex-enhanced interrupted fin Journal of Heat Transfer. 125: 788-794. DOI: 10.1115/1.1597616 |
0.526 |
|
2003 |
DeJong NC, Jacobi AM. Flow, heat transfer, and pressure drop in the near-wall region of louvered-fin arrays Experimental Thermal and Fluid Science. 27: 237-250. DOI: 10.1016/S0894-1777(02)00224-8 |
0.485 |
|
2003 |
ElSherbini AI, Jacobi AM, Hrnjak PS. Experimental investigation of thermal contact resistance in plain-fin-and-tube evaporators with collarless fins International Journal of Refrigeration. 26: 527-536. DOI: 10.1016/S0140-7007(03)00007-0 |
0.831 |
|
2003 |
DeJong NC, Jacobi AM. Localized flow and heat transfer interactions in louvered-fin arrays International Journal of Heat and Mass Transfer. 46: 443-455. DOI: 10.1016/S0017-9310(02)00292-2 |
0.527 |
|
2003 |
Sebens JM, Burton RL, Jacobi AM. Minimum-mass heat exchanger design for hypersonic vehicles 39th Aiaa/Asme/Sae/Asee Joint Propulsion Conference and Exhibit. |
0.489 |
|
2003 |
Sebens JM, Burton RL, Jacobi AM, Brown KA, Michna GJ. Combining liquid air cycles with turbine engines for RLVS 12th Aiaa International Space Planes and Hypersonic Systems and Technologies. |
0.743 |
|
2002 |
Jacobi AM, Thome JR. Heat transfer model for evaporation of elongated bubble flows in microchannels Journal of Heat Transfer. 124: 1131-1136. DOI: 10.1115/1.1517274 |
0.563 |
|
2002 |
Gentry MC, Jacobi AM. Heat transfer enhancement by delta-wing-generated tip vortices in flat-plate and developing channel flows Journal of Heat Transfer. 124: 1158-1168. DOI: 10.1115/1.1513578 |
0.485 |
|
2002 |
ElSherbini AI, Jacobi AM. The thermal-hydraulic impact of delta-wing vortex generators on the performance of a plain-fin-and-tube heat exchanger Hvac and R Research. 8: 357-370. DOI: 10.1080/10789669.2002.10391295 |
0.844 |
|
2001 |
Zhang CA, Hu H, Jacobi AM, Kaiser JM. Water condensate retention and "wet" fin performance in automotive evaporators Sae Technical Papers. DOI: 10.4271/2001-01-1252 |
0.328 |
|
2001 |
Korte C, Jacobi AM. Condensate retention effects on the performance of plain-fin-and-tube heat exchangers: Retention data and modeling Journal of Heat Transfer. 123: 926-936. DOI: 10.1115/1.1391276 |
0.505 |
|
2001 |
Kearney SP, Jacobi AM, Lucht RP. Time-resolved thermal boundary-layer structure in a pulsatile reversing channel flow Journal of Heat Transfer. 123: 655-664. DOI: 10.1115/1.1372317 |
0.369 |
|
2001 |
Liu MS, Leu JS, Shyu RJ, Wang CC, Zhang W, Jacobi AM. Effect of successively variable louver angle on the air-side performance of fin-and-tube heat exchangers Ashrae Transactions. 107: 510-516. |
0.44 |
|
2000 |
Mehendale SS, Jacobi AM, Shah RK. Fluid flow and heat transfer at micro- and meso-scales with application to heat exchanger design Applied Mechanics Reviews. 53: 175-193. DOI: 10.1115/1.3097347 |
0.527 |
|
2000 |
Idem SA, Jacobi AM, Goldschmidt VW. Fin heat transfer modeling and its impact on predictions of efficiency and condensation in gas-fired boilers Heat Transfer Engineering. 21: 7-17. DOI: 10.1080/01457630050194762 |
0.803 |
|
1999 |
DeJong NC, Jacobi AM. Local flow and heat transfer behavior in convex-louver fin arrays Journal of Heat Transfer. 121: 136-141. DOI: 10.1115/1.2825926 |
0.5 |
|
1999 |
Kearney SP, Lucht RP, Jacobi AM. Temperature measurements in convective heat transfer flows using dual-broadband, pure-rotational coherent anti-Stokes Raman spectroscopy (CARS) Experimental Thermal and Fluid Science. 19: 13-26. DOI: 10.1016/S0894-1777(99)00004-7 |
0.455 |
|
1999 |
Rush TA, Newell TA, Jacobi AM. An experimental study of flow and heat transfer in sinusoidal wavy passages International Journal of Heat and Mass Transfer. 42: 1541-1553. DOI: 10.1016/S0017-9310(98)00264-6 |
0.426 |
|
1998 |
Beamer HE, Ghosh D, Bellows KD, Huang L, Jacobi AM. Applied CFD and experiment for automotive compact heat exchanger development Sae Technical Papers. DOI: 10.4271/980426 |
0.51 |
|
1998 |
DeJong NC, Zhang LW, Jacobi AM, Balachandar S, Tafti DK. A complementary experimental and numerical study of the flow and heat transfer in offset strip-fin heat exchangers Journal of Heat Transfer. 120: 690-698. DOI: 10.1115/1.2824338 |
0.536 |
|
1998 |
DeJong NC, Gentry MC, Jacobi AM. Entropy-based, air-side heat exchanger performance evaluation method: Application to a condenser Ashrae Transactions. 104: 395. DOI: 10.1080/10789669.1997.10391373 |
0.53 |
|
1998 |
Jacobi AM, Shah RK. Air-side flow and heat transfer in compact heat exchangers: A discussion of enhancement mechanisms Heat Transfer Engineering. 19: 29-41. DOI: 10.1080/01457639808939934 |
0.549 |
|
1998 |
Hu X, Jacobi AM. Departure-site spacing for liquid droplets and jets falling between horizontal circular tubes Experimental Thermal and Fluid Science. 16: 322-331. DOI: 10.1016/S0894-1777(97)10031-0 |
0.35 |
|
1997 |
Gentry MC, Jacobi AM. Heat Transfer Enhancement by Delta-Wing Vortex Generators on a Flat Plate: Vortex Interactions with the Boundary Layer Experimental Thermal and Fluid Science. 14: 231-242. DOI: 10.1016/S0894-1777(96)00067-2 |
0.365 |
|
1997 |
Dejong NC, Jacobi AM. An experimental study of flow and heat transfer in parallel-plate arrays: Local, row-by-row and surface average behavior International Journal of Heat and Mass Transfer. 40: 1365-1378. DOI: 10.1016/S0017-9310(96)00186-X |
0.471 |
|
1997 |
DeJong NC, Gentry MC, Jacobi AM. An entropy-based, air-side heat exchanger performance evaluation method: Application to a condenser Hvac and R Research. 3: 185-195. |
0.438 |
|
1996 |
Kearney SP, Jacobi AM. Local convective behavior and fin efficiency in shallow banks of in-line and staggered, annularly finned tubes Journal of Heat Transfer. 118: 317-326. DOI: 10.1115/1.2825847 |
0.513 |
|
1996 |
Hu X, Jacobi AM. The intertube falling film: Part 2 - Mode effects on sensible heat transfer to a falling liquid film Journal of Heat Transfer. 118: 626-633. DOI: 10.1115/1.2822678 |
0.482 |
|
1996 |
Hu X, Jacobi AM. The intertube falling film: Part 1 - Flow characteristics, mode transitions, and hysteresis Journal of Heat Transfer. 118: 616-624. DOI: 10.1115/1.2822676 |
0.392 |
|
1995 |
Kearney SP, Jacobi AM. Effects of Gull-Wing Baffles on the Performance of a Single-Row, Annularly Finned Tube Heat Exchanger Hvac and R Research. 1: 257-270. DOI: 10.1080/10789669.1995.10391324 |
0.57 |
|
1995 |
Jacobi AM, Shah RK. Heat transfer surface enhancement through the use of longitudinal vortices: A review of recent progress Experimental Thermal and Fluid Science. 11: 295-309. DOI: 10.1016/0894-1777(95)00066-U |
0.547 |
|
1994 |
Hu X, Zhang L, Jacobi AM. Surface irregularity effects of droplets and retained condensate on local heat transfer to finned tubes in cross-flow Ashrae Transactions. 100: 375-381. |
0.511 |
|
1993 |
Jacobi AM. A Scale Analysis Approach to the Correlation of Continuous Moving Sheet (Backward Boundary Layer) Forced Convective Heat Transfer Journal of Heat Transfer. 115: 1058-1061. DOI: 10.1115/1.2911362 |
0.434 |
|
1993 |
Hu X, Jacobi AM. Local heat transfer behavior and its impact on a single-row, annularly finned tube heat exchanger Transactions - Asme: Journal of Heat Transfer. 115: 66-74. DOI: 10.1115/1.2910671 |
0.531 |
|
1993 |
Jacobi AM, Idem SA, Goldschmidt VW. Predicting the performance of multistage heat exchangers Heat Transfer Engineering. 14: 62-70. DOI: 10.1080/01457639308939795 |
0.796 |
|
1992 |
Jacobi AM. Filmwise condensation from a flowing vapor onto isothermal, axisymmetric bodies Journal of Thermophysics and Heat Transfer. 6: 321-325. DOI: 10.2514/3.362 |
0.327 |
|
1992 |
Hu X, Jacobi AM. Vapor shear and pressure gradient effects during filmwise condensation from a flowing vapor onto a sphere Experimental Thermal and Fluid Science. 5: 548-555. DOI: 10.1016/0894-1777(92)90041-3 |
0.427 |
|
1992 |
Hu X, Zhang L, Jacobi AM. Droplet and retained condensate effects on local convective heat transfer for annularly-finned tubes in cross flow Institution of Chemical Engineers Symposium Series. 1: 261-247. |
0.5 |
|
1992 |
Idem SA, Jacobi AM, Maxwell GM, Goldschmidt VW. A performance model of an instantaneous, condensing, gas-fired hot water boiler Ashrae Transactions. 98: 165-171. |
0.436 |
|
1990 |
Idem SA, Jacobi AM, Goldschmidt VW. Heat transfer characterization of a finned-tube heat exchanger (with and without condensation) Journal of Heat Transfer. 112: 64-70. DOI: 10.1115/1.2910366 |
0.816 |
|
1990 |
Jacobi AM, Goldschmidt VW. Measurement of the velocity of products of combustion in gas-fired heaters Flow Measurement and Instrumentation. 1: 293-296. DOI: 10.1016/0955-5986(90)90028-6 |
0.681 |
|
1990 |
Jacobi AM, Goldschmidt VW. Low Reynolds number heat and mass transfer measurements of an overall counterflow, baffled, finned-tube, condensing heat exchanger International Journal of Heat and Mass Transfer. 33: 755-765. DOI: 10.1016/0017-9310(90)90173-R |
0.805 |
|
1990 |
Jacobi AM, Goldschmidt VW, Bublitz MC, Tree DR. Condensing heat transfer on a hemispherical body American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 136: 63-68. |
0.404 |
|
1989 |
Jacobi AM. Flow and Heat Transfer in Microchannels Using a Microcontinuum Approach Journal of Heat Transfer. 111: 1083-1085. DOI: 10.1115/1.3250771 |
0.523 |
|
1989 |
Jacobi AM, Goldschmidt VW. The effect of surface tension variation on filmwise condensation and heat transfer on a cylinder in cross flow International Journal of Heat and Mass Transfer. 32: 1483-1490. DOI: 10.1016/0017-9310(89)90070-7 |
0.808 |
|
Show low-probability matches. |