Year |
Citation |
Score |
2020 |
Bedekar V, Voothaluru R, Yu D, Wong A, Galindo-Nava E, Gorti SB, An K, Hyde RS. Effect of nickel on the kinematic stability of retained austenite in carburized bearing steels – In-situ neutron diffraction and crystal plasticity modeling of uniaxial tension tests in AISI 8620, 4320 and 3310 steels International Journal of Plasticity. 131: 102748. DOI: 10.1016/J.Ijplas.2020.102748 |
0.45 |
|
2019 |
Bedekar V, Voothaluru R, Bunn J, Hyde RS. Measurement and prediction of through-section residual stresses in the manufacturing sequence of bearing components Cirp Annals-Manufacturing Technology. 68: 57-60. DOI: 10.1016/J.Cirp.2019.03.004 |
0.335 |
|
2019 |
Leung JFW, Bedekar V, Voothaluru R, Neu RW. Mechanical Properties of White Etching Areas in Carburized Bearing Steel Using Spherical Nanoindentation Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 4949-4954. DOI: 10.1007/S11661-019-05419-2 |
0.366 |
|
2018 |
Voothaluru R, Bedekar V, Xie Q, Stoica AD, Hyde RS, An K. In-situ neutron diffraction and crystal plasticity finite element modeling to study the kinematic stability of retained austenite in bearing steels Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 711: 579-587. DOI: 10.1016/J.Msea.2017.11.069 |
0.417 |
|
2018 |
Guo W, Meng Y, Zhang X, Bedekar V, Bei H, Hyde S, Guo Q, Thompson GB, Shivpuri R, Zuo J, Poplawsky JD. Extremely hard amorphous-crystalline hybrid steel surface produced by deformation induced cementite amorphization Acta Materialia. 152: 107-118. DOI: 10.1016/J.Actamat.2018.04.013 |
0.556 |
|
2018 |
Shreeram DD, Bedekar V, Li S, Cong H, Doll GL. Corrosion- and Wear-Resistant Pulse Reverse Current (PRC)-Based Electrodeposited Ni-W Coating Jom. 70: 2603-2610. DOI: 10.1007/S11837-018-3084-9 |
0.351 |
|
2017 |
Bedekar V, Voothaluru R, Xie Q, Stoica A, Hyde RS, An K. In-situ Neutron Diffraction Analysis of Crystal Plasticity of Retained Austenite in Bearing Steel Procedia Engineering. 207: 1958-1963. DOI: 10.1016/J.Proeng.2017.10.968 |
0.439 |
|
2017 |
Sridharan U, Bedekar V, Kolarits FM. A functional approach to integrating grinding temperature modeling and Barkhausen noise analysis for prediction of surface integrity in bearing steels Cirp Annals-Manufacturing Technology. 66: 333-336. DOI: 10.1016/J.Cirp.2017.04.086 |
0.359 |
|
2016 |
Bedekar V, Poplawsky JD, Guo W, Shivpuri R, Scott Hyde R. Atomic migration of carbon in hard turned layers of carburized bearing steel Cirp Annals - Manufacturing Technology. DOI: 10.1016/J.Cirp.2016.04.009 |
0.518 |
|
2015 |
Avishai A, Abbasi K, Wang D, Avishai N, Wu D, Bedekar V, Hyde S, Sitzman S, Heuer A. Tackling Characterization Challenges in High Deformation/Stress Steel Alloys Using Transmission Kikuchi Diffraction (TKD) Microscopy and Microanalysis. 21: 2377-2378. DOI: 10.1017/S1431927615012660 |
0.446 |
|
2015 |
Bedekar V, Shivpuri R, Avishai A, Hyde RS. Transmission Kikuchi Diffraction study of texture and orientation development in nanostructured hard turning layers Cirp Annals - Manufacturing Technology. 64: 73-76. DOI: 10.1016/J.Cirp.2015.04.073 |
0.516 |
|
2014 |
Wu D, Avishai A, Bedekar V, Hyde S, Heuer A. Transmission electron diffraction investigation of white etching areas in bearing steels: A comparison between TKD and TEM Microscopy and Microanalysis. 20: 1476-1477. DOI: 10.1017/S1431927614009118 |
0.367 |
|
2014 |
Bedekar V, Pauskar P, Shivpuri R, Howe J. Microstructure and texture evolutions in AISI 1050 steel by flow forming Procedia Engineering. 81: 2355-2360. DOI: 10.1016/J.Proeng.2014.10.333 |
0.53 |
|
2013 |
Bedekar V, Shivpuri R, Chaudhari R, Hyde RS. Nanostructural evolution of hard turning layers in response to insert geometry, cutting parameters and material microstructure Cirp Annals - Manufacturing Technology. 62: 63-66. DOI: 10.1016/J.Cirp.2013.03.090 |
0.533 |
|
2013 |
Bedekar V, Chaudhari RG, Shivpuri R. Nanostructural evolution of hard turning white layer during machining of through hardened 52100 steel Transactions of the North American Manufacturing Research Institution of Sme. 41: 168-177. |
0.552 |
|
2012 |
Bedekar V, Hyde R, Shivpuri R. TEM Investigation of Butterfly and White Etching Area Formed During Rolling Contact Fatigue Microscopy and Microanalysis. 18: 1778-1779. DOI: 10.1017/S1431927612010744 |
0.463 |
|
2005 |
Hua J, Shivpuri R, Cheng X, Bedekar V, Matsumoto Y, Hashimoto F, Watkins TR. Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometry Materials Science and Engineering A. 394: 238-248. DOI: 10.1016/J.Msea.2004.11.011 |
0.574 |
|
2003 |
Bedekar V, Bhat DG, Batzer SA, Walker L, Allard LF. Thermodynamic, tribological and chemical interdiffusion study of ultra-hard ceramic AlMgB14 in the machining of aerospace alloys American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 14: 229-237. DOI: 10.1115/IMECE2003-42374 |
0.314 |
|
Show low-probability matches. |