Year |
Citation |
Score |
2020 |
Ganji RS, Rajulapati KV, Rao KBS. Development of a Multi-phase AlCuTaVW High-Entropy Alloy Using Powder Metallurgy Route and its Mechanical Properties Transactions of the Indian Institute of Metals. 73: 613-618. DOI: 10.1007/S12666-020-01875-2 |
0.38 |
|
2020 |
Patibanda S, Varam S, Gollapudi S, Rao KBS, Rajulapati KV. On the Hardness and Strain Rate Sensitivity of Electrodeposited Nanocrystalline Ni–18 wt% Co Alloy Studied by Nanoindentation Transactions of the Indian Institute of Metals. 73: 457-464. DOI: 10.1007/S12666-019-01851-5 |
0.474 |
|
2019 |
Algenaid W, Ganvir A, Calinas RF, Varghese J, Rajulapati KV, Joshi S. Influence of microstructure on the erosion behaviour of suspension plasma sprayed thermal barrier coatings Surface & Coatings Technology. 375: 86-99. DOI: 10.1016/J.Surfcoat.2019.06.075 |
0.319 |
|
2019 |
Jadav J, Rajulapati KV, Rao KBS, Prasad NE, Mythili R, Prasad K. Strain controlled isothermal low cycle fatigue life, deformation and fracture characteristics of Superni 263 superalloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 760: 296-315. DOI: 10.1016/J.Msea.2019.05.119 |
0.374 |
|
2019 |
Yella P, Rajulapati KV, Reddy GVP, Sandhya R, Kiran PP, Buddu RK, Rao KBS. Effect of laser shock peening on high cycle fatigue characteristics of 316LN stainless steel International Journal of Pressure Vessels and Piping. 176: 103972. DOI: 10.1016/J.Ijpvp.2019.103972 |
0.373 |
|
2019 |
S S, Golla BR, Rajulapati KV. Influence of ZrB2 hard ceramic reinforcement on mechanical and wear properties of aluminum Ceramics International. 45: 7055-7070. DOI: 10.1016/J.Ceramint.2018.12.208 |
0.425 |
|
2019 |
Abhijit A, Varghese J, Chalavadi P, Karthik PS, Rao KBS, Rajulapati KV. Negative Strain Rate Sensitivity in Two-Phase Nanocrystalline CoCrFeMnNi High-Entropy Alloy with Broader Grain Size Distribution Studied by Nanoindentation Transactions of the Indian Institute of Metals. 72: 2861-2867. DOI: 10.1007/S12666-019-01762-5 |
0.419 |
|
2018 |
Manugula VL, Rajulapati KV, Reddy GM, Kumar ER, Rao KBS. Friction stir welding of thick section reduced activation ferritic–martensitic steel Science and Technology of Welding and Joining. 23: 666-676. DOI: 10.1080/13621718.2018.1467111 |
0.322 |
|
2018 |
Yella P, Venkateswarlu P, Buddu RK, Ravi N, Rao KBS, Kiran PP, Rajulapati KV. Role of sacrificial layers on surface characteristics of laser shock peened SS304 plates Optics and Laser Technology. 107: 142-149. DOI: 10.1016/J.Optlastec.2018.05.018 |
0.301 |
|
2017 |
Nagini M, Vijay R, Rajulapati KV, Reddy AV, Sundararajan G. Microstructure–mechanical property correlation in oxide dispersion strengthened 18Cr ferritic steel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 708: 451-459. DOI: 10.1016/J.Msea.2017.10.023 |
0.419 |
|
2017 |
Manugula VL, Rajulapati KV, Reddy GM, Rao KBS. Role of evolving microstructure on the mechanical properties of electron beam welded ferritic-martensitic steel in the as-welded and post weld heat-treated states Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 698: 36-45. DOI: 10.1016/J.Msea.2017.05.036 |
0.38 |
|
2017 |
Ganji RS, Karthik PS, Rao KBS, Rajulapati KV. Strengthening mechanisms in equiatomic ultrafine grained AlCoCrCuFeNi high-entropy alloy studied by micro- and nanoindentation methods Acta Materialia. 125: 58-68. DOI: 10.1016/J.Actamat.2016.11.046 |
0.457 |
|
2017 |
Rahul R, Rajulapati KV, Reddy GM, Mohandas T, Rao KBS. Studies on Effect of Parent Metal Condition on the Room Temperature Mechanical Properties of Ti6Al4V Friction Welds Transactions of the Indian Institute of Metals. 70: 2277-2291. DOI: 10.1007/S12666-017-1084-Z |
0.35 |
|
2017 |
Manugula VL, Rajulapati KV, Reddy GM, Mythili R, Rao KBS. Influence of Tool Rotational Speed and Post-Weld Heat Treatments on Friction Stir Welded Reduced Activation Ferritic-Martensitic Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 3702-3720. DOI: 10.1007/S11661-017-4143-5 |
0.414 |
|
2016 |
Varam S, Prasad MD, Rao KBS, Rajulapati KV. Mechanical properties of in situ consolidated nanocrystalline multi-phase Al–Pb–W alloy studied by nanoindentation Philosophical Magazine. 1-15. DOI: 10.1080/14786435.2016.1234721 |
0.436 |
|
2016 |
Dwivedi A, Koch CC, Rajulapati KV. On the single phase fcc solid solution in nanocrystalline Cr-Nb-Ti-V-Zn high-entropy alloy Materials Letters. 183: 44-47. DOI: 10.1016/J.Matlet.2016.07.083 |
0.539 |
|
2016 |
Manugula VL, Rajulapati KV, Madhusudhan Reddy G, Mythili R, Bhanu Sankara Rao K. A critical assessment of the microstructure and mechanical properties of friction stir welded reduced activation ferritic-martensitic steel Materials and Design. 92: 200-212. DOI: 10.1016/J.Matdes.2015.12.019 |
0.429 |
|
2016 |
Nagini M, Jyothirmayi A, Vijay R, Rao TN, Reddy AV, Rajulapati KV, Sundararajan G. Influence of Dispersoids on Corrosion Behavior of Oxide Dispersion-Strengthened 18Cr Steels made by High-Energy Milling Journal of Materials Engineering and Performance. 25: 577-586. DOI: 10.1007/S11665-015-1859-5 |
0.375 |
|
2016 |
Nagini M, Vijay R, Rajulapati KV, Rao KBS, Ramakrishna M, Reddy AV, Sundararajan G. Effect of Process Parameters on Microstructure and Hardness of Oxide Dispersion Strengthened 18Cr Ferritic Steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 4197-4209. DOI: 10.1007/S11661-016-3583-7 |
0.423 |
|
2015 |
Pavithra CLP, Sarada BV, Rajulapati KV, Ramakrishna M, Gundakaram RC, Rao TN, Sundararajan G. Controllable Crystallographic Texture in Copper Foils Exhibiting Enhanced Mechanical and Electrical Properties by Pulse Reverse Electrodeposition Crystal Growth and Design. 15: 4448-4458. DOI: 10.1021/Acs.Cgd.5B00748 |
0.333 |
|
2014 |
Pavithra CL, Sarada BV, Rajulapati KV, Rao TN, Sundararajan G. A new electrochemical approach for the synthesis of copper-graphene nanocomposite foils with high hardness. Scientific Reports. 4: 4049. PMID 24514043 DOI: 10.1038/Srep04049 |
0.333 |
|
2014 |
Varam S, Narayana PVSL, Prasad MD, Chakravarty D, Rajulapati KV, Bhanu Sankara Rao K. Strain rate sensitivity of bulk multi-phase nanocrystalline Al-W-based alloy Philosophical Magazine Letters. 94: 582-591. DOI: 10.1080/09500839.2014.948522 |
0.459 |
|
2014 |
Yella P, Pinnoju V, Rajulapati KV, Kiran PP, Buddu RK, Raole PM, Rao KBS. Structural details of laser treated SS 304 and SS 316L(N) plates Procedia Engineering. 86: 27-33. DOI: 10.1016/J.Proeng.2014.11.007 |
0.329 |
|
2014 |
Yagati KP, Bathe RN, Rajulapati KV, Sankara Rao KB, Padmanabham G. Fluxless arc weld-brazing of aluminium alloy to steel Journal of Materials Processing Technology. 214: 2949-2959. DOI: 10.1016/J.Jmatprotec.2014.06.017 |
0.421 |
|
2014 |
Varam S, Rajulapati KV, Bhanu Sankara Rao K. Strain rate sensitivity studies on bulk nanocrystalline aluminium by nanoindentation Journal of Alloys and Compounds. 585: 795-799. DOI: 10.1016/J.Jallcom.2013.09.116 |
0.444 |
|
2014 |
Pemmasani SP, Valleti K, Gundakaram RC, Rajulapati KV, Mantripragada R, Koppoju S, Joshi SV. Effect of microstructure and phase constitution on mechanical properties of Ti1-xAlxN coatings Applied Surface Science. 313: 936-946. DOI: 10.1016/J.Apsusc.2014.06.112 |
0.453 |
|
2014 |
Varam S, Rajulapati KV, Bhanu Sankara Rao K, Scattergood RO, Murty KL, Koch CC. Loading rate-dependent mechanical properties of bulk two-phase nanocrystalline Al-Pb alloys studied by nanoindentation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 5249-5258. DOI: 10.1007/S11661-014-2425-8 |
0.592 |
|
2013 |
Pemmasani SP, Rajulapati KV, Ramakrishna M, Valleti K, Gundakaram RC, Joshi SV. Characterization of multilayer nitride coatings by electron microscopy and modulus mapping Materials Characterization. 81: 7-18. DOI: 10.1016/J.Matchar.2013.04.003 |
0.303 |
|
2013 |
Prasad K, Abhaya S, Amarendra G, Kumar V, Rajulapati KV, Bhanu Sankara Rao K. Fatigue crack growth behaviour of a near α titanium alloy Timetal 834 at 450°C and 600°C Engineering Fracture Mechanics. 102: 194-206. DOI: 10.1016/J.Engfracmech.2013.02.017 |
0.3 |
|
2012 |
Pemmasani SP, Valleti K, Ramakrishna M, Rajulapati KV, Gundakaram RC, Joshi SV. Structure-property correlations in cathodic arc deposited tialn coatings Materials Science Forum. 702: 967-970. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.967 |
0.337 |
|
2010 |
Gollapudi S, Rajulapati KV, Charit I, Koch CC, Scattergood RO, Murty KL. Creep in nanocrystalline materials: Role of stress assisted grain growth Materials Science and Engineering A. 527: 5773-5781. DOI: 10.1016/J.Msea.2010.05.048 |
0.585 |
|
2010 |
Gollapudi S, Rajulapati KV, Charit I, Youssef KM, Koch CC, Scattergood RO, Murty KL. Understanding creep in nanocrystalline materials Transactions of the Indian Institute of Metals. 63: 373-378. DOI: 10.1007/S12666-010-0050-9 |
0.637 |
|
2008 |
Rajulapati KV, Scattergood RO, Murty KL, Horita Z, Langdon TG, Koch CC. Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 2528-2534. DOI: 10.1007/S11661-008-9593-3 |
0.576 |
|
2006 |
Rajulapati KV, Scattergood RO, Murty KL, Duscher G, Koch CC. Effect of Pb on the mechanical properties of nanocrystalline Al Scripta Materialia. 55: 155-158. DOI: 10.1016/J.Scriptamat.2006.03.051 |
0.526 |
|
2003 |
Koch CC, Scattergood RO, Murty KL, Guduru RK, Trichy G, Rajulapati KV. Testing techniques for mechanical characterization of nanostructured materials Materials Research Society Symposium - Proceedings. 791: 51-62. DOI: 10.1557/Proc-791-Q3.1 |
0.356 |
|
2003 |
Koch CC, Scattergood RO, Linga Murty K, Guduru RK, Trichy G, Rajulapati KV. Testing Techniques for Mechanical Characterization of Nanostructured Materials Mrs Proceedings. 791. DOI: 10.1557/PROC-791-Q3.1 |
0.454 |
|
Show low-probability matches. |