Year |
Citation |
Score |
2022 |
Habraken AM, Aksen TA, Alves JL, Amaral RL, Betaieb E, Chandola N, Corallo L, Cruz DJ, Duchêne L, Engel B, Esener E, Firat M, Frohn-Sörensen P, Galán-López J, Ghiabakloo H, ... ... Cazacu O, et al. Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations. International Journal of Material Forming. 15: 61. PMID 35855077 DOI: 10.1007/s12289-022-01672-w |
0.775 |
|
2020 |
Cazacu O. Predictive Capabilities of Non-Quadratic Orthotropic Criteria Procedia Manufacturing. 47: 1548-1551. DOI: 10.1016/J.Promfg.2020.04.348 |
0.416 |
|
2020 |
Cazacu O. New expressions and calibration strategies for Karafillis and Boyce (1993) yield criterion International Journal of Solids and Structures. 410-422. DOI: 10.1016/J.Ijsolstr.2019.09.004 |
0.437 |
|
2020 |
N'souglo KE, Rodríguez-Martínez JA, Cazacu O. The effect of tension-compression asymmetry on the formation of dynamic necking instabilities under plane strain stretching International Journal of Plasticity. 128: 102656. DOI: 10.1016/J.Ijplas.2019.102656 |
0.516 |
|
2020 |
Cazacu O, Chandola N, Revil-Baudard B, Frodal BH, Børvik T, Hopperstad OS. Modeling the effect of notch geometry on the deformation of a strongly anisotropic aluminum alloy European Journal of Mechanics a-Solids. 82: 104004. DOI: 10.1016/J.Euromechsol.2020.104004 |
0.826 |
|
2020 |
Chandola N, Cazacu O, Revil-Baudard B. Response to the letter to editor International Journal of Material Forming. 13: 855-860. DOI: 10.1007/S12289-020-01585-6 |
0.762 |
|
2020 |
Banabic D, Barlat F, Cazacu O, Kuwabara T. Advances in anisotropy of plastic behaviour and formability of sheet metals International Journal of Material Forming. 13: 749-787. DOI: 10.1007/S12289-020-01580-X |
0.512 |
|
2019 |
Cazacu O, Rodríguez-Martínez JA. Effects of plastic anisotropy on localization in orthotropic materials: New explicit expressions for the orientation of localization bands in flat specimens subjected to uniaxial tension Journal of the Mechanics and Physics of Solids. 126: 272-284. DOI: 10.1016/J.Jmps.2019.03.002 |
0.434 |
|
2019 |
Cazacu O. New mathematical results and explicit expressions in terms of the stress components of Barlat et al. (1991) orthotropic yield criterion International Journal of Solids and Structures. 86-95. DOI: 10.1016/J.Ijsolstr.2019.05.016 |
0.401 |
|
2019 |
N’souglo KE, Rodríguez-Martínez JA, Vaz-Romero A, Cazacu O. The combined effect of plastic orthotropy and tension-compression asymmetry on the development of necking instabilities in flat tensile specimens subjected to dynamic loading International Journal of Solids and Structures. 159: 272-288. DOI: 10.1016/J.Ijsolstr.2018.10.006 |
0.487 |
|
2019 |
Chandola N, Cazacu O, Revil-Baudard B. Correction to: Prediction of strain distribution and four, six, or eight ears depending on single-crystal orientation using a new single crystal criterion International Journal of Material Forming. 13: 159-160. DOI: 10.1007/S12289-018-01465-0 |
0.764 |
|
2018 |
Savage DJ, Chandola N, Cazacu O, McWilliams BA, Knezevic M. Validation of recent analytical dilatational models for porous polycrystals using crystal plasticity finite element models with Schmid and non-Schmid activation laws Mechanics of Materials. 126: 148-162. DOI: 10.1016/J.Mechmat.2018.08.004 |
0.84 |
|
2018 |
Cazacu O. New yield criteria for isotropic and textured metallic materials International Journal of Solids and Structures. 200-210. DOI: 10.1016/J.Ijsolstr.2018.01.036 |
0.474 |
|
2018 |
Chandola N, Cazacu O, Revil-Baudard B. Prediction of plastic anisotropy of textured polycrystalline sheets using a new single-crystal model Comptes Rendus Mecanique. 346: 756-769. DOI: 10.1016/J.Crme.2018.05.004 |
0.82 |
|
2018 |
Cazacu O, Chandola N, Revil-Baudard B. Analytical expressions for the yield stress and Lankford coefficients of polycrystalline sheets based on a new single crystal model International Journal of Material Forming. 11: 571-581. DOI: 10.1007/S12289-017-1366-3 |
0.818 |
|
2017 |
Chandola N, Cazacu O, Revil-Baudard B. Prediction of Anisotropy of Textured Sheets Based on a New Polycrystal Model Procedia Engineering. 207: 239-244. DOI: 10.1016/J.Proeng.2017.10.768 |
0.808 |
|
2017 |
Cazacu O, Revil-Baudard B, Chandola N. New analytic criterion for FCC single crystals Procedia Engineering. 207: 2113-2118. DOI: 10.1016/J.Proeng.2017.10.1110 |
0.769 |
|
2017 |
Chandola N, Cazacu O, Revil-Baudard B. New polycrystalline modeling as applied to textured steel sheets Mechanics Research Communications. 84: 98-101. DOI: 10.1016/J.Mechrescom.2017.07.001 |
0.814 |
|
2017 |
Cazacu O, Revil-Baudard B, Chandola N. A yield criterion for cubic single crystals International Journal of Solids and Structures. 151: 9-19. DOI: 10.1016/J.Ijsolstr.2017.04.006 |
0.782 |
|
2017 |
Srivastava A, Revil-Baudard B, Cazacu O, Needleman A. A model for creep of porous crystals with cubic symmetry International Journal of Solids and Structures. 110: 67-79. DOI: 10.1016/J.Ijsolstr.2017.02.002 |
0.514 |
|
2017 |
Revil-Baudard B, Cazacu O, Chandola N. Effect of the yield stresses in uniaxial tension and pure shear on the size of the plastic zone near a crack International Journal of Plasticity. 102: 101-117. DOI: 10.1016/J.Ijplas.2017.12.006 |
0.774 |
|
2017 |
Cazacu O, Revil-Baudard B. New analytic criterion for porous solids with pressure-insensitive matrix International Journal of Plasticity. 89: 66-84. DOI: 10.1016/J.Ijplas.2016.11.002 |
0.438 |
|
2016 |
Revil-Baudard B, Cazacu O, Flater P, Chandola N, Alves JL. Unusual plastic deformation and damage features in titanium: Experimental tests and constitutive modeling Journal of the Mechanics and Physics of Solids. 88: 100-122. DOI: 10.1016/J.Jmps.2016.01.003 |
0.807 |
|
2015 |
Chandola N, Mishra RK, Cazacu O. Application of the VPSC model to the description of the stress-strain response and texture evolution in AZ31 Mg for various strain paths Journal of Engineering Materials and Technology, Transactions of the Asme. 137. DOI: 10.1115/1.4030999 |
0.821 |
|
2015 |
Revil-Baudard B, Cazacu O, Flater P, Kleiser G. Plastic deformation of high-purity α-titanium: Model development and validation using the Taylor cylinder impact test Mechanics of Materials. 80: 264-275. DOI: 10.1016/J.Mechmat.2014.03.010 |
0.515 |
|
2015 |
Kleiser GJ, Revil-Baudard B, Cazacu O, Pasiliao CL. Plastic deformation of polycrystalline molybdenum: Experimental data and macroscopic model accounting for its anisotropy and tension–compression asymmetry International Journal of Solids and Structures. 75: 287-298. DOI: 10.1016/J.Ijsolstr.2015.08.021 |
0.554 |
|
2015 |
Chandola N, Lebensohn RA, Cazacu O, Revil-Baudard B, Mishra RK, Barlat F. Combined effects of anisotropy and tension-compression asymmetry on the torsional response of AZ31 Mg International Journal of Solids and Structures. 58: 190-200. DOI: 10.1016/J.Ijsolstr.2015.01.001 |
0.817 |
|
2015 |
Alves JL, Cazacu O. Micromechanical study of the dilatational response of porous solids with pressure-insensitive matrix displaying tension-compression asymmetry European Journal of Mechanics a-Solids. 51: 44-54. DOI: 10.1016/J.Euromechsol.2014.11.010 |
0.487 |
|
2015 |
Alves JL, Cazacu O. Correlation between strength differential effects in the plastic flow of the matrix and the rate of damage growth in porous polycrystals Comptes Rendus Mecanique. 343: 107-120. DOI: 10.1016/J.Crme.2014.12.002 |
0.48 |
|
2015 |
Cazacu O, Revil-Baudard B. New three-dimensional plastic potentials for porous solids with a von Mises matrix Comptes Rendus Mecanique. 343: 77-94. DOI: 10.1016/J.Crme.2014.12.001 |
0.47 |
|
2015 |
Kleiser G, Revil-Baudard B, Cazacu O, Pasiliao CL. Experimental Characterization and Modeling of the Anisotropy and Tension-Compression Asymmetry of Polycrystalline Molybdenum for Strain Rates Ranging from Quasi-static to Impact Jom. 67: 2635-2641. DOI: 10.1007/S11837-015-1612-4 |
0.529 |
|
2015 |
Chandola N, Cazacu O, Revil-Baudard B. New Model Predicting the Unusual Buckling Behavior of AZ31 Mg Magnesium Technology. 153-157. DOI: 10.1007/978-3-319-48185-2_29 |
0.795 |
|
2014 |
Alves JL, Revil-Baudard B, Cazacu O. Importance of the coupling between the sign of the mean stress and the third invariant on the rate of void growth and collapse in porous solids with a von Mises matrix Modelling and Simulation in Materials Science and Engineering. 22: 25005. DOI: 10.1088/0965-0393/22/2/025005 |
0.477 |
|
2014 |
Revil-Baudard B, Cazacu O. On Modeling Plasticity-damage Couplings in Polycrystalline Materials Procedia Materials Science. 3: 1423-1428. DOI: 10.1016/J.Mspro.2014.06.230 |
0.533 |
|
2014 |
Cazacu O, Revil-Baudard B, Chandola N, Alves JL. New Analytical Criterion for Porous Solids with Tresca Matrix Procedia Materials Science. 3: 1412-1417. DOI: 10.1016/J.Mspro.2014.06.228 |
0.801 |
|
2014 |
Leblond J, Morin L, Cazacu O. An Improved Description of Spherical Void Growth in Plastic Porous Materials with Finite Porosities Procedia Materials Science. 3: 1232-1237. DOI: 10.1016/J.Mspro.2014.06.200 |
0.458 |
|
2014 |
Revil-Baudard B, Cazacu O. Role of the plastic flow of the matrix on yielding and void evolution of porous solids: Comparison between the theoretical response of porous solids with Tresca and von Mises matrices Mechanics Research Communications. 56: 69-75. DOI: 10.1016/J.Mechrescom.2013.11.008 |
0.462 |
|
2014 |
Revil-Baudard B, Chandola N, Cazacu O, Barlat F. Correlation between swift effects and tension–compression asymmetry in various polycrystalline materials Journal of the Mechanics and Physics of Solids. 70: 104-115. DOI: 10.1016/J.Jmps.2014.05.012 |
0.841 |
|
2014 |
Cazacu O, Revil-Baudard B, Chandola N, Kondo D. New analytical criterion for porous solids with Tresca matrix under axisymmetric loadings International Journal of Solids and Structures. 51: 861-874. DOI: 10.1016/J.Ijsolstr.2013.11.010 |
0.802 |
|
2014 |
Revil-Baudard B, Cazacu O. New three-dimensional strain-rate potentials for isotropic porous metals: Role of the plastic flow of the matrix International Journal of Plasticity. 60: 101-117. DOI: 10.1016/J.Ijplas.2014.04.003 |
0.505 |
|
2014 |
Cazacu O, Chandola N, Alves JL, Revil-Baudard B. Importance of the consideration of the specificities of local plastic deformation on the response of porous solids with Tresca matrix European Journal of Mechanics a-Solids. 47: 194-205. DOI: 10.1016/J.Euromechsol.2014.04.004 |
0.821 |
|
2014 |
Cazacu O, Revil-Baudard B, Barlat F. New interpretation of cyclic Swift effects European Journal of Mechanics a-Solids. 44: 82-90. DOI: 10.1016/J.Euromechsol.2013.10.005 |
0.547 |
|
2013 |
Yoon J, Cazacu O, Lee JH. Localized Necking in a Round Tensile Bar with HCP Material Considering Tension-Compression Asymmetry in Plastic Flow Key Engineering Materials. 164-167. DOI: 10.4028/Www.Scientific.Net/Kem.535-536.164 |
0.531 |
|
2013 |
Cazacu O, Revil-Baudard B, Lebensohn RA, Gărăjeu M. On the Combined Effect of Pressure and Third Invariant on Yielding of Porous Solids With von Mises Matrix Journal of Applied Mechanics. 80: 64501. DOI: 10.1115/1.4024074 |
0.46 |
|
2013 |
Cazacu O, Stewart JB. Analytical criterion for porous solids containing cylindrical voids in an incompressible matrix exhibiting tension-compression asymmetry Philosophical Magazine. 93: 1520-1548. DOI: 10.1080/14786435.2012.746792 |
0.824 |
|
2013 |
Yoon J, Cazacu O, Mishra RK. Constitutive modeling of AZ31 sheet alloy with application to axial crushing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 565: 203-212. DOI: 10.1016/J.Msea.2012.12.054 |
0.458 |
|
2013 |
Knezevic M, Lebensohn RA, Cazacu O, Revil-Baudard B, Proust G, Vogel SC, Nixon ME. Modeling bending of α-titanium with embedded polycrystal plasticity in implicit finite elements Materials Science and Engineering A. 564: 116-126. DOI: 10.1016/J.Msea.2012.11.037 |
0.832 |
|
2013 |
Balan T, Cazacu O. Elastic-plastic ductile damage model based on strain-rate plastic potential Mechanics Research Communications. 54: 21-26. DOI: 10.1016/J.Mechrescom.2013.09.006 |
0.496 |
|
2013 |
Revil-Baudard B, Cazacu O, Thuillier S, Maire E. Effect of stress triaxiality on porosity evolution in notched bars: Quantitative agreement between a recent dilatational model and X-ray tomography data Mechanics Research Communications. 50: 77-82. DOI: 10.1016/J.Mechrescom.2013.04.005 |
0.431 |
|
2013 |
Cazacu O, Revil-Baudard B, Barlat F. New interpretation of monotonic Swift effects: Role of tension–compression asymmetry Mechanics of Materials. 57: 42-52. DOI: 10.1016/J.Mechmat.2012.10.007 |
0.525 |
|
2013 |
Revil-Baudard B, Cazacu O. On the effect of the matrix tension–compression asymmetry on damage evolution in porous plastic solids European Journal of Mechanics a-Solids. 37: 35-44. DOI: 10.1016/J.Euromechsol.2012.05.001 |
0.529 |
|
2013 |
Martin BE, Cazacu O. Experimental and theoretical investigation of the high‐pressure, undrained response of a cohesionless sand International Journal For Numerical and Analytical Methods in Geomechanics. 37: 2321-2347. DOI: 10.1002/Nag.2143 |
0.424 |
|
2012 |
Revil-Baudard B, Yoon J, Stewart JB, Cazacu O. On the influence of damage evolution in an incompressible material with matrix displaying tension-compression asymmetry Procedia Iutam. 3: 331-349. DOI: 10.1016/J.Piutam.2012.03.021 |
0.834 |
|
2012 |
Gilles G, Cazacu O, Hammami W, Habraken A, Duchene L. Experimental and numerical study of TA-6V mechanical behavior in different monotonic loading conditions at room temperature Procedia Iutam. 3: 100-114. DOI: 10.1016/J.Piutam.2012.03.008 |
0.532 |
|
2012 |
Saimoto S, Cazacu O, Kaschner GC. Characterization of work-hardening evolution in hexagonal metals using mean slip distance normalized with inter-obstacle spacing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 543: 129-138. DOI: 10.1016/J.Msea.2012.02.060 |
0.442 |
|
2012 |
Bouvier S, Benmhenni N, Tirry W, Gregory F, Nixon ME, Cazacu O, Rabet L. Hardening in relation with microstructure evolution of high purity α-titanium deformed under monotonic and cyclic simple shear loadings at room temperature Materials Science and Engineering A. 535: 12-21. DOI: 10.1016/J.Msea.2011.12.033 |
0.823 |
|
2012 |
Lebensohn RA, Cazacu O. Effect of single-crystal plastic deformation mechanisms on the dilatational plastic response of porous polycrystals International Journal of Solids and Structures. 49: 3838-3852. DOI: 10.1016/J.Ijsolstr.2012.08.019 |
0.492 |
|
2012 |
Monchiet V, Gruescu C, Cazacu O, Kondo D. A micromechanical approach of crack-induced damage in orthotropic media: Application to a brittle matrix composite Engineering Fracture Mechanics. 83: 40-53. DOI: 10.1016/J.Engfracmech.2011.11.011 |
0.385 |
|
2011 |
Tirry W, Nixon M, Cazacu O, Coghe F, Rabet L. The importance of secondary and ternary twinning in compressed Ti Scripta Materialia. 64: 840-843. DOI: 10.1016/J.Scriptamat.2011.01.012 |
0.803 |
|
2011 |
Gilles G, Hammami W, Libertiaux V, Cazacu O, Yoon JH, Kuwabara T, Habraken AM, Duchêne L. Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6 V at room temperature International Journal of Solids and Structures. 48: 1277-1289. DOI: 10.1016/J.Ijsolstr.2011.01.011 |
0.542 |
|
2011 |
Stewart JB, Cazacu O. Analytical yield criterion for an anisotropic material containing spherical voids and exhibiting tension-compression asymmetry International Journal of Solids and Structures. 48: 357-373. DOI: 10.1016/J.Ijsolstr.2010.10.009 |
0.846 |
|
2011 |
Yoon JH, Stewart JB, Cazacu O. Coupled elastic-plastic damage model for a porous aggregate with an incompressible matrix displaying tension-compression asymmetry Engineering Fracture Mechanics. 78: 1407-1423. DOI: 10.1016/J.Engfracmech.2011.03.003 |
0.851 |
|
2011 |
Yoon J, Cazacu O, Yoon JW. Strain-rate potential based elastic/plastic anisotropic model for metals displaying tension―compression asymmetry Computer Methods in Applied Mechanics and Engineering. 200: 1993-2004. DOI: 10.1016/J.Cma.2011.03.003 |
0.517 |
|
2010 |
Cazacu O, Ionescu IR. Dynamic crystal plasticity: An Eulerian approach Journal of the Mechanics and Physics of Solids. 58: 844-859. DOI: 10.1016/J.Jmps.2010.04.001 |
0.501 |
|
2010 |
Inal K, Mishra RK, Cazacu O. Forming simulation of aluminum sheets using an anisotropic yield function coupled with crystal plasticity theory International Journal of Solids and Structures. 47: 2223-2233. DOI: 10.1016/J.Ijsolstr.2010.04.017 |
0.555 |
|
2010 |
Cazacu O, Ionescu IR, Yoon JW. Orthotropic strain rate potential for the description of anisotropy in tension and compression of metals International Journal of Plasticity. 26: 887-904. DOI: 10.1016/J.Ijplas.2009.11.005 |
0.433 |
|
2010 |
Nixon ME, Cazacu O, Lebensohn RA. Anisotropic response of high-purity α-titanium: Experimental characterization and constitutive modeling International Journal of Plasticity. 26: 516-532. DOI: 10.1016/J.Ijplas.2009.08.007 |
0.842 |
|
2010 |
Yoon J, Cazacu O, Yoon JW, Dick RE. Earing predictions for strongly textured aluminum sheets International Journal of Mechanical Sciences. 52: 1563-1578. DOI: 10.1016/J.Ijmecsci.2010.07.005 |
0.51 |
|
2010 |
Cazacu O, Ionescu IR. Augmented Lagrangian method for Eulerian modeling of viscoplastic crystals Computer Methods in Applied Mechanics and Engineering. 199: 689-699. DOI: 10.1016/J.Cma.2009.10.018 |
0.453 |
|
2010 |
Nixon ME, Lebensohn RA, Cazacu O, Liu C. Experimental and finite-element analysis of the anisotropic response of high-purity α-titanium in bending Acta Materialia. 58: 5759-5767. DOI: 10.1016/J.Actamat.2010.06.051 |
0.824 |
|
2010 |
Banabic D, Barlat F, Cazacu O, Kuwabara T. Advances in anisotropy and formability International Journal of Material Forming. 3: 165-189. DOI: 10.1007/S12289-010-0992-9 |
0.484 |
|
2010 |
Cazacu O, Yoon J-, Yoon J-. New Anisotropic Strain-rate Potential for Hexagonal Metals International Journal of Material Forming. 3: 227-230. DOI: 10.1007/S12289-010-0748-6 |
0.459 |
|
2009 |
Cazacu O, Stewart JB. Analytic plastic potential for porous aggregates with matrix exhibiting tension-compression asymmetry Journal of the Mechanics and Physics of Solids. 57: 325-341. DOI: 10.1016/J.Jmps.2008.10.010 |
0.84 |
|
2009 |
Schmidt MJ, Cazacu O, Green ML. Experimental and theoretical investigation of the high-pressure behavior of concrete International Journal For Numerical and Analytical Methods in Geomechanics. 33: 1-23. DOI: 10.1002/Nag.700 |
0.416 |
|
2008 |
Monchiet V, Cazacu O, Charkaluk E, Kondo D. Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids International Journal of Plasticity. 24: 1158-1189. DOI: 10.1016/J.Ijplas.2007.08.008 |
0.539 |
|
2008 |
Soare S, Yoon JW, Cazacu O. On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming International Journal of Plasticity. 24: 915-944. DOI: 10.1016/J.Ijplas.2007.07.016 |
0.78 |
|
2008 |
Plunkett B, Cazacu O, Barlat F. Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals International Journal of Plasticity. 24: 847-866. DOI: 10.1016/J.Ijplas.2007.07.013 |
0.823 |
|
2008 |
Cleja-Tigoiu S, Cazacu O, Tigoiu V. Dynamic expansion of a spherical cavity within a rate-dependent compressible porous material International Journal of Plasticity. 24: 775-803. DOI: 10.1016/J.Ijplas.2007.07.006 |
0.371 |
|
2008 |
Cazacu O, Ionescu IR, Perrot T. Numerical modeling of projectile penetration into compressible rigid viscoplastic media International Journal For Numerical Methods in Engineering. 74: 1240-1261. DOI: 10.1002/Nme.2208 |
0.455 |
|
2007 |
Cazacu O, Soare S, Kondo D. On modeling the interaction between initial and damage-induced anisotropy in transversely isotropic solids Mathematics and Mechanics of Solids. 12: 305-318. DOI: 10.1177/1081286505059750 |
0.787 |
|
2007 |
Plunkett B, Cazacu O, Lebensohn RA, Barlat F. Elastic-viscoplastic anisotropic modeling of textured metals and validation using the Taylor cylinder impact test International Journal of Plasticity. 23: 1001-1021. DOI: 10.1016/J.Ijplas.2006.10.008 |
0.838 |
|
2007 |
Barlat F, Yoon JW, Cazacu O. On linear transformations of stress tensors for the description of plastic anisotropy International Journal of Plasticity. 23: 876-896. DOI: 10.1016/J.Ijplas.2006.10.001 |
0.411 |
|
2006 |
Schmidt MJ, Cazacu O. Behavior of cementitious materials for high-strain rate conditions Journal De Physique. Iv : Jp. 134: 1119-1124. DOI: 10.1051/Jp4:2006134171 |
0.461 |
|
2006 |
Plunkett B, Cazacu O, Lebensohn RA. Strain-rate effects on the texture evolution of low-symmetry metals : Modeling and validation using the Taylor cylinder impact test Journal De Physique Iv. 134: 81-86. DOI: 10.1051/Jp4:2006134014 |
0.83 |
|
2006 |
Cazacu O, Ionescu IR. Compressible rigid viscoplastic fluids Journal of the Mechanics and Physics of Solids. 54: 1640-1667. DOI: 10.1016/J.Jmps.2006.02.001 |
0.528 |
|
2006 |
Armstrong RW, Cazacu O. Indentation fracture mechanics toughness dependence on grain size and crack size: Application to alumina and WC–Co International Journal of Refractory Metals & Hard Materials. 24: 129-134. DOI: 10.1016/J.Ijrmhm.2005.03.010 |
0.324 |
|
2006 |
Cazacu O, Plunkett B, Barlat F. Orthotropic yield criterion for hexagonal closed packed metals International Journal of Plasticity. 22: 1171-1194. DOI: 10.1016/J.Ijplas.2005.06.001 |
0.825 |
|
2006 |
Cazacu O, Ionescu IR, Perrot T. Steady-state flow of compressible rigid-viscoplastic media International Journal of Engineering Science. 44: 1082-1097. DOI: 10.1016/J.Ijengsci.2006.05.011 |
0.415 |
|
2006 |
Plunkett B, Lebensohn RA, Cazacu O, Barlat F. Anisotropic yield function of hexagonal materials taking into account texture development and anisotropic hardening Acta Materialia. 54: 4159-4169. DOI: 10.1016/J.Actamat.2006.05.009 |
0.849 |
|
2006 |
Cazacu O, Cristescu ND, Schmidt MJ. Analysis of the steady-state flow of a compressible viscoplastic medium over a wedge International Journal For Numerical and Analytical Methods in Geomechanics. 30: 489-499. DOI: 10.1002/Nag.487 |
0.375 |
|
2004 |
Cazacu O, Barlat F. A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals International Journal of Plasticity. 20: 2027-2045. DOI: 10.1016/J.Ijplas.2003.11.021 |
0.527 |
|
2003 |
Banabic D, Cazacu O, Barlat F, Comsa DS, Wagner S, Siegert K. Description of anisotropic behaviour of AA3103-0 aluminium alloy using two recent yield criteria Journal De Physique Iv. 105: 297-304. DOI: 10.1051/Jp4:20030200 |
0.501 |
|
2003 |
Cazacu O, Barlat F. Application of the theory of representation to describe yielding of anisotropic aluminum alloys International Journal of Engineering Science. 41: 1367-1385. DOI: 10.1016/S0020-7225(03)00037-5 |
0.467 |
|
2002 |
Cazacu O, Barlat F. A New Anisotropic Yield Criterion for Aluminium Alloys Key Engineering Materials. 537-540. DOI: 10.4028/Www.Scientific.Net/Kem.230-232.537 |
0.331 |
|
2002 |
Cristescu ND, Cazacu O, Cristescu C. A model for slow motion of natural slopes Canadian Geotechnical Journal. 39: 924-937. DOI: 10.1139/T02-040 |
0.427 |
|
2002 |
Cazacu O. A new hyperelastic model for transversely isotropic solids Zeitschrift FüR Angewandte Mathematik Und Physik. 53: 901-911. DOI: 10.1007/Pl00012618 |
0.489 |
|
2001 |
Cazacu O, Barlat F. Generalization of Drucker's Yield Criterion to Orthotropy Mathematics and Mechanics of Solids. 6: 613-630. DOI: 10.1177/108128650100600603 |
0.458 |
|
1999 |
Cazacu O, Cristescu ND. A paraboloid failure surface for transversely isotropic materials Mechanics of Materials. 31: 381-393. DOI: 10.1016/S0167-6636(99)00008-3 |
0.465 |
|
1999 |
Cazacu O. On the choice of stress-dependent elastic moduli for transversely isotropic solids Mechanics Research Communications. 26: 45-54. DOI: 10.1016/S0093-6413(98)00098-6 |
0.409 |
|
1998 |
Cazacu O, Cristescu ND, Shao JF, Henry JP. A new anisotropic failure criterion for transversely isotropic solids Mechanics of Cohesive-Frictional Materials. 3: 89-103. DOI: 10.1002/(Sici)1099-1484(199801)3:1<89::Aid-Cfm41>3.0.Co;2-2 |
0.425 |
|
1997 |
Cazacu O, Jin J, Cristescu ND. A New Constitutive Model for Alumina Powder Compaction Kona Powder and Particle Journal. 15: 103-112. DOI: 10.14356/Kona.1997014 |
0.349 |
|
Show low-probability matches. |