Year |
Citation |
Score |
2020 |
Boonchuduang T, Bootchanont A, Klysubun W, Amonpattaratkit P, Khamkongkaeo A, Puncreobutr C, Yimnirun R, Lohwongwatana B. Formation of Alpha-Case Layer During Investment Casting of Pure Ti and Ti-6Al-4V Using Comparative XRD and EXAFS Investigation Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 51: 586-596. DOI: 10.1007/S11661-019-05541-1 |
0.354 |
|
2019 |
Khamkongkaeo A, Bootchanont A, Klysubun W, Amonpattaratkit P, Boonchuduang T, Tuchinda N, Phetrattanarangsi T, Nuntawong N, Kuimalee S, Lohwongwatana B. Effect of phosphate compound on physical and mechanical properties of SiO2 ceramic Ceramics International. 45: 1356-1362. DOI: 10.1016/J.Ceramint.2018.07.253 |
0.389 |
|
2018 |
Thongchai C, Lohwongwatana B, Puncreobutr C, Khamkongkaeo A, Phetrattanarangsi T, Sakkomolsri B, Kidkhunthod P, Chanlek N. Study of Microstructure and Mechanical Properties of Commercially Pure Sn and Sn-4%Bi Alloys Fabricated by Permanent Mold Gravity Casting and Forging Engineering Journal. 22: 171-183. DOI: 10.4186/Ej.2018.22.5.171 |
0.47 |
|
2018 |
Tantavisut S, Lohwongwatana B, Khamkongkaeo A, Bootchai S, Tangpornprasert P, Tanavalee A, Ittiravivong P. Characterization and Quick Screening Methodology of Novel Alloys for Biomedical Applications Using Filtered Cathodic Vacuum Arc Deposited Thin Film Solid State Phenomena. 283: 78-87. DOI: 10.4028/Www.Scientific.Net/Ssp.283.78 |
0.448 |
|
2017 |
Darayen J, Athichalinthorn P, Techapiesancharoenkij R, Mahabunphachai S, Puncreobutr C, Lothongkum G, Lohwongwatana B. Microstructural and Diffusion Analysis of Au-Sn Diffusion Couple Layer Undergoing Heat Treatment at Near Eutectic Temperatures Engineering Journal. 21: 245-253. DOI: 10.4186/Ej.2017.21.1.245 |
0.376 |
|
2017 |
Athichalinthorn P, Darayen J, Puttichaem W, Techapiesancharoenkij R, Lohwongwatana B. The Thermal-Aging Effect on the Microstructure Evolution and Shear Strength of the Sn-Rich Au-Sn Soldering between Altic and Si Substrate in Microelectronics Key Engineering Materials. 751: 3-8. DOI: 10.4028/Www.Scientific.Net/Kem.751.3 |
0.428 |
|
2017 |
Phetrattanarangsi T, Puncreobutr C, Khamkongkaeo A, Thongchai C, Sakkomolsri B, Kuimalee S, Kidkhunthod P, Chanlek N, Lohwongwatana B. The behavior of gypsum-bonded investment in the gold jewelry casting process Thermochimica Acta. 657: 144-150. DOI: 10.1016/J.Tca.2017.09.008 |
0.344 |
|
2017 |
Tantavisut S, Lohwongwatana B, Khamkongkaeo A, Tanavalee A, Tangpornprasert P, Ittiravivong P. The novel toxic free titanium-based amorphous alloy for biomedical application Journal of Materials Research and Technology. 7: 248-253. DOI: 10.1016/J.Jmrt.2017.08.007 |
0.493 |
|
2017 |
Khamkongkaeo A, Mothaneeyachart N, Sriwattana P, Boonchuduang T, Phetrattanarangsi T, Thongchai C, Sakkomolsri B, Pimsawat A, Daengsakul S, Phumying S, Chanlek N, Kidkhunthod P, Lohwongwatana B. Ferromagnetism and diamagnetism behaviors of MgO synthesized via thermal decomposition method Journal of Alloys and Compounds. 705: 668-674. DOI: 10.1016/J.Jallcom.2017.02.170 |
0.33 |
|
2016 |
Sunyadeth S, Wirot P, Lohwongwatana B, Techapiesancharoenkij R. The Alloying and Aging Effects on the Wettability and Intermetallic Bonding of the Sn-Zn-Cu-Bi Soldering Alloy on a Cu Substrate Materials Science Forum. 857: 26-30. DOI: 10.4028/Www.Scientific.Net/Msf.857.26 |
0.408 |
|
2014 |
Boonchu N, Lawan A, Thipayarat K, Pintasiri S, Kanjanakijkasem W, Kuimalee S, Lohwongwatana B. Microstructure of gold nano-cystals from nanometer to micrometer lengthscale in gold bulk metallic glass Advanced Materials Research. 983: 59-62. DOI: 10.4028/Www.Scientific.Net/Amr.983.59 |
0.513 |
|
2014 |
Thumsoontorn S, Kuimalee S, Kuntalue B, Pintasiri S, Lohwongwatana B. Microstructure and Direct Measured Micro-Strain by TEM of Hot Iso-Static Pressed Alumina-Titanium Carbide (Al2O3-TiC) Composite Advanced Materials Research. 983: 156-160. DOI: 10.4028/Www.Scientific.Net/Amr.983.156 |
0.337 |
|
2014 |
Udomlertpreecha S, Pavasant P, Lohwongwatana B. Surface Modification of Titanium Alloys Using Alumina Particles Blasting for Biomedical Applications Advanced Materials Research. 983: 135-140. DOI: 10.4028/Www.Scientific.Net/Amr.983.135 |
0.435 |
|
2014 |
Penglao W, Tachai L, Lohwongwatana B. Effect of Linear Sliding Speed on Wear Behavior of Al2O3/TiC Ceramic Composite and Diamond Slicing Blade Advanced Materials Research. 292-297. DOI: 10.4028/Www.Scientific.Net/Amr.1025-1026.292 |
0.313 |
|
2014 |
Thipayarat K, Nisaratanaporn E, Lohwongwatana B. Investigation of Solid Solubility, Hardness, and Thermal Properties of Au-Ge-Sb System Advanced Materials Research. 1016: 336-341. DOI: 10.4028/Www.Scientific.Net/Amr.1016.336 |
0.469 |
|
2014 |
Thipayarat K, Lewan A, Nisaratanaporn E, Lohwongwatana B. Thermodynamic Solidification Path Assessment and Microstructural Comparison of Deep Eutectic Au-Cu-Si System Applied Mechanics and Materials. 259-263. DOI: 10.4028/Www.Scientific.Net/Amm.548-549.259 |
0.469 |
|
2014 |
Teng-amnuay N, Tangpatjaroen C, Nisaratanaporn E, Lohwongwatana B. Replication of Trabecular Bone Structure and Reaction Layer Analysis of Titanium Alloys Using Investment Casting Technique Procedia Technology. 12: 316-322. DOI: 10.1016/J.Protcy.2013.12.492 |
0.354 |
|
2013 |
Praiphruk S, Lothongkum G, Nisaratanaporn E, Lohwongwatana B. Effects of Copper (Cu), Indium (In), Tin (Sn), Antimony (Sb) and Zinc (Zn) in Sterling Silver Alloys on Mechanical Properties Improvement Materials Testing. 55: 819-823. DOI: 10.3139/120.110513 |
0.458 |
|
2013 |
Nootchanat S, Thammacharoen C, Lohwongwatana B, Ekgasit S. Formation of large H2O2-reduced gold nanosheets via starch-induced two-dimensional oriented attachment Rsc Advances. 3: 3707. DOI: 10.1039/C3Ra22830D |
0.3 |
|
2012 |
Piyavatin P, Lothongkum G, Lohwongwatana B. Characterization of Eutectic Sn-Cu Solder Alloy Properties Improved by Additions of Ni, Co and In Materials Testing. 54: 383-389. DOI: 10.3139/120.110342 |
0.489 |
|
2008 |
Suh JY, Lohwongwatana B, Garland CM, Conner RD, Johnson WL, Suh D. Novel thermoplastic bonding using a bulk metallic glass solder Scripta Materialia. 59: 905-908. DOI: 10.1016/J.Scriptamat.2008.06.055 |
0.628 |
|
2007 |
Schroers J, Lohwongwatana B, Johnson WL, Peker A. Precious bulk metallic glasses for jewelry applications Materials Science and Engineering A. 448: 235-238. DOI: 10.1016/J.Msea.2006.02.301 |
0.702 |
|
2006 |
Lohwongwatana B, Schroers J, Johnson WL. Strain rate induced crystallization in bulk metallic glass-forming liquid. Physical Review Letters. 96: 075503. PMID 16606105 DOI: 10.1103/Physrevlett.96.075503 |
0.652 |
|
2005 |
Schroers J, Lohwongwatana B, Johnson WL, Peker A. Gold based bulk metallic glass Applied Physics Letters. 87. DOI: 10.1063/1.2008374 |
0.694 |
|
2004 |
Xu D, Lohwongwatana B, Duan G, Johnson WL, Garland C. Bulk metallic glass formation in binary Cu-rich alloy series – Cu100−xZrx (x=34, 36, 38.2, 40 at.%) and mechanical properties of bulk Cu64Zr36 glass Acta Materialia. 52: 2621-2624. DOI: 10.1016/J.Actamat.2004.02.009 |
0.66 |
|
Show low-probability matches. |