| Year |
Citation |
Score |
| 2020 |
Gildersleeve EJ, Sampath S. Dynamic interactions of ingested molten silicate particles with air plasma sprayed thermal barrier coatings Journal of Materials Research. 35: 2321-2334. DOI: 10.1557/Jmr.2020.196 |
0.521 |
|
| 2020 |
Kedir N, Garcia E, Kirk C, Guo Z, Gao J, Zhai X, Sun T, Fezzaa K, Sampath S, Chen WW. In situ characterization of foreign object damage (FOD) in environmental‐barrier‐coated silicon carbide (SiC) ceramic Journal of the American Ceramic Society. 103: 4586-4601. DOI: 10.1111/Jace.17165 |
0.303 |
|
| 2020 |
Smith GM, Gildersleeve EJ, Luo X, Luzin V, Sampath S. On the surface and system performance of thermally sprayed carbide coatings produced under controlled residual stresses Surface and Coatings Technology. 387: 125536. DOI: 10.1016/J.Surfcoat.2020.125536 |
0.561 |
|
| 2020 |
Garcia E, Sotelo-Mazon O, Poblano-Salas C, Trapaga G, Sampath S. Characterization of Yb2Si2O7–Yb2SiO5 composite environmental barrier coatings resultant from in situ plasma spray processing Ceramics International. 46: 21328-21335. DOI: 10.1016/J.Ceramint.2020.05.228 |
0.593 |
|
| 2020 |
Lal D, Kumar P, Sampath S, Jayaram V. Hysteretic and time dependent deformation of plasma sprayed zirconia ceramics Acta Materialia. 194: 394-402. DOI: 10.1016/J.Actamat.2020.04.056 |
0.476 |
|
| 2020 |
Shinde SV, Gildersleeve EJ, Johnson CA, Sampath S. Segmentation crack formation dynamics during air plasma spraying of zirconia Acta Materialia. 183: 196-206. DOI: 10.1016/J.Actamat.2019.10.052 |
0.499 |
|
| 2020 |
Caliari FR, Lee H, Sampath S. Optimization of All-Oxide 2D Layered Thermoelectric Device Fabricated by Plasma Spray Journal of Thermal Spray Technology. DOI: 10.1007/S11666-020-01085-8 |
0.311 |
|
| 2020 |
Valarezo A, Shinoda K, Sampath S. Effect of Deposition Rate and Deposition Temperature on Residual Stress of HVOF-Sprayed Coatings Journal of Thermal Spray Technology. 29: 1322-1338. DOI: 10.1007/S11666-020-01073-Y |
0.468 |
|
| 2020 |
Smith GM, Saputo J, Luzin V, Sampath S. Observation of Residual Stress and Fatigue Behavior of Structurally Integrated Thermally Sprayed Nickel Coatings Journal of Thermal Spray Technology. 29: 1229-1241. DOI: 10.1007/S11666-020-01035-4 |
0.473 |
|
| 2020 |
Gildersleeve EJ, Sampath S. Process-Geometry Interplay in the Deposition and Microstructural Evolution of 7YSZ Thermal Barrier Coatings by Air Plasma Spray Journal of Thermal Spray Technology. 29: 560-573. DOI: 10.1007/S11666-020-01018-5 |
0.565 |
|
| 2019 |
Gingrich E, Tess M, Korivi V, Schihl P, Saputo J, Smith GM, Sampath S, Ghandhi J. The impact of piston thermal barrier coating roughness on high-load diesel operation: International Journal of Engine Research. 146808741989348. DOI: 10.1177/1468087419893487 |
0.458 |
|
| 2019 |
Pint BA, Lance MJ, Haynes JA, Gildersleeve EJ, Sampath S. Effect of APS Flash Bond Coatings on Furnace Cycle Lifetime of Disks and Rods Journal of Engineering For Gas Turbines and Power-Transactions of the Asme. DOI: 10.1115/Gt2019-90501 |
0.415 |
|
| 2019 |
Lance M, Thiesing B, Haynes J, Gildersleeve E, Sampath S, Pint B. Effect of APS flash bond coatings and curvature on TBC performance on rod specimens Surface and Coatings Technology. 378: 124940. DOI: 10.1016/J.Surfcoat.2019.124940 |
0.533 |
|
| 2019 |
Gildersleeve EJ, Viswanathan V, Lance MJ, Haynes JA, Pint BA, Sampath S. Role of bond coat processing methods on the durability of plasma sprayed thermal barrier systems Surface & Coatings Technology. 375: 782-792. DOI: 10.1016/J.Surfcoat.2019.07.065 |
0.575 |
|
| 2019 |
Lee H, Caliari F, Sampath S. Thermoelectric properties of plasma sprayed of calcium cobaltite (Ca2Co2O5) Journal of the European Ceramic Society. 39: 3749-3755. DOI: 10.1016/J.Jeurceramsoc.2019.05.008 |
0.465 |
|
| 2019 |
Gildersleeve E, Viswanathan V, Sampath S. Molten silicate interactions with plasma sprayed thermal barrier coatings: Role of materials and microstructure Journal of the European Ceramic Society. 39: 2122-2131. DOI: 10.1016/J.Jeurceramsoc.2019.01.023 |
0.581 |
|
| 2019 |
Garcia E, Lee H, Sampath S. Phase and microstructure evolution in plasma sprayed Yb2Si2O7 coatings Journal of the European Ceramic Society. 39: 1477-1486. DOI: 10.1016/J.Jeurceramsoc.2018.11.018 |
0.57 |
|
| 2019 |
Luo X, Smith GM, Wang Y, Gildersleeve E, Sampath S, Li C. Cracking induced tribological behavior changes for the HVOF WC-12Co cermet coatings Ceramics International. 45: 4718-4728. DOI: 10.1016/J.Ceramint.2018.11.164 |
0.421 |
|
| 2019 |
Bejarano ML, Valarezo A, Lara-Curzio E, Sampath S. Dilation Behavior of Thermal Spray Coatings Journal of Thermal Spray Technology. 28: 1851-1866. DOI: 10.1007/S11666-019-00927-4 |
0.519 |
|
| 2019 |
Seshadri RC, Sampath S. Characteristics of Conventional and Cascaded Arc Plasma Spray-Deposited Ceramic Under Standard and High-Throughput Conditions Journal of Thermal Spray Technology. 28: 690-705. DOI: 10.1007/S11666-019-00841-9 |
0.534 |
|
| 2018 |
Smith GM, Resnick M, Kjellman B, Wigren J, Dwivedi G, Sampath S. Orientation‐dependent mechanical and thermal properties of plasma‐sprayed ceramics Journal of the American Ceramic Society. 101: 2471-2481. DOI: 10.1111/Jace.15405 |
0.625 |
|
| 2018 |
Lamana MS, Pukasiewicz AGM, Sampath S. Influence of cobalt content and HVOF deposition process on the cavitation erosion resistance of WC-Co coatings Wear. 209-219. DOI: 10.1016/J.Wear.2017.12.009 |
0.545 |
|
| 2018 |
Smith GM, Sampath S. Sustainability of Metal Structures via Spray-Clad Remanufacturing Jom. 70: 512-520. DOI: 10.1007/S11837-017-2676-0 |
0.365 |
|
| 2018 |
Smith GM, Smith A, Sampath S. Fracture Toughness of Thermal Spray Ceramics: Measurement Techniques and Processing Dependence Journal of Thermal Spray Technology. 27: 1076-1089. DOI: 10.1007/S11666-018-0755-6 |
0.545 |
|
| 2018 |
Lee H, Seshadri RC, Pala Z, Sampath S. Optimizing Thermoelectric Properties of In Situ Plasma-Spray-Synthesized Sub-stoichiometric TiO 2−x Deposits Journal of Thermal Spray Technology. 27: 968-982. DOI: 10.1007/S11666-018-0731-1 |
0.5 |
|
| 2018 |
Luo X, Smith GM, Sampath S. On the Interplay Between Adhesion Strength and Tensile Properties of Thermal Spray Coated Laminates—Part I: High Velocity Thermal Spray Coatings Journal of Thermal Spray Technology. 27: 296-307. DOI: 10.1007/S11666-018-0695-1 |
0.546 |
|
| 2018 |
Wang H, Muralidharan G, Leonard DN, Haynes JA, Porter WD, England RD, Hays M, Dwivedi G, Sampath S. Microstructural Analysis and Transport Properties of Thermally Sprayed Multiple-Layer Ceramic Coatings Journal of Thermal Spray Technology. 27: 371-378. DOI: 10.1007/S11666-017-0680-0 |
0.71 |
|
| 2017 |
Luzin V, Vackel A, Valarezo A, Sampath S. Neutron Through-Thickness Stress Measurements in Coatings with High Spatial Resolution Materials Science Forum. 905: 165-173. DOI: 10.4028/Www.Scientific.Net/Msf.905.165 |
0.394 |
|
| 2017 |
Wang Q, Ramachandran CS, Smith GM, Sampath S. Sliding wear behavior of air plasma sprayed Al2O3 coatings sealed with aluminum phosphate Tribology International. 116: 431-439. DOI: 10.1016/J.Triboint.2017.08.002 |
0.547 |
|
| 2017 |
Smith GM, Higgins O, Sampath S. In-situ observation of strain and cracking in coated laminates by digital image correlation Surface & Coatings Technology. 328: 211-218. DOI: 10.1016/J.Surfcoat.2017.08.057 |
0.546 |
|
| 2017 |
Vackel A, Sampath S. Fatigue behavior of thermal sprayed WC-CoCr- steel systems: Role of process and deposition parameters Surface & Coatings Technology. 315: 408-416. DOI: 10.1016/J.Surfcoat.2017.02.062 |
0.55 |
|
| 2017 |
Lee H, Chidambaram Seshadri R, Han SJ, Sampath S. TiO 2−X based thermoelectric generators enabled by additive and layered manufacturing Applied Energy. 192: 24-32. DOI: 10.1016/J.Apenergy.2017.02.001 |
0.375 |
|
| 2017 |
Tewolde M, Zhang T, Lee H, Sampath S, Hwang D, Longtin J. Laser Processing of Multilayered Thermal Spray Coatings: Optimal Processing Parameters Journal of Thermal Spray Technology. 26: 1994-2004. DOI: 10.1007/S11666-017-0657-Z |
0.366 |
|
| 2017 |
Vardelle A, Moreau C, Akedo J, Ashrafizadeh H, Berndt CC, Berghaus JO, Boulos M, Brogan J, Bourtsalas AC, Dolatabadi A, Dorfman M, Eden TJ, Fauchais P, Fisher G, Gaertner F, ... ... Sampath S, et al. Erratum to: The 2016 Thermal Spray Roadmap Journal of Thermal Spray Technology. 26: 985-986. DOI: 10.1007/S11666-017-0560-7 |
0.431 |
|
| 2016 |
Lee H, Han SJ, Chidambaram Seshadri R, Sampath S. Thermoelectric properties of in-situ plasma spray synthesized sub-stoichiometry TiO2-x. Scientific Reports. 6: 36581. PMID 27811954 DOI: 10.1038/Srep36581 |
0.42 |
|
| 2016 |
Smith GM, Resnick M, Flynn K, Dwivedi G, Sampath S. Nature inspired, multi-functional, damage tolerant thermal spray coatings Surface and Coatings Technology. 297: 43-50. DOI: 10.1016/J.Surfcoat.2016.04.047 |
0.805 |
|
| 2016 |
Han SJ, Pala Z, Sampath S. Plasma sprayed manganese-cobalt spinel coatings: Process sensitivity on phase, electrical and protective performance Journal of Power Sources. 304: 234-243. DOI: 10.1016/j.jpowsour.2015.11.040 |
0.395 |
|
| 2016 |
Kotlan J, Seshadri RC, Sampath S, Ctibor P. The role of amorphous phase content on the electrical properties of atmospheric plasma sprayed (Ba,Sr)TiO3 coatings Ceramics International. 42: 11010-11014. DOI: 10.1016/j.ceramint.2016.03.241 |
0.337 |
|
| 2016 |
Krause AR, Garces HF, Dwivedi G, Ortiz AL, Sampath S, Padture NP. Calcia-magnesia-alumino-silicate (CMAS)-induced degradation and failure of air plasma sprayed yttria-stabilized zirconia thermal barrier coatings Acta Materialia. 105: 355-366. DOI: 10.1016/J.Actamat.2015.12.044 |
0.668 |
|
| 2016 |
Vardelle A, Moreau C, Akedo J, Ashrafizadeh H, Berndt CC, Berghaus JO, Boulos M, Brogan J, Bourtsalas AC, Dolatabadi A, Dorfman M, Eden TJ, Fauchais P, Fisher G, Gaertner F, ... ... Sampath S, et al. The 2016 Thermal Spray Roadmap Journal of Thermal Spray Technology. 25: 1376-1440. DOI: 10.1007/S11666-016-0473-X |
0.402 |
|
| 2016 |
Seshadri RC, Dwivedi G, Viswanathan V, Sampath S. Characterizing Suspension Plasma Spray Coating Formation Dynamics through Curvature Measurements Journal of Thermal Spray Technology. 25: 1666-1683. DOI: 10.1007/S11666-016-0460-2 |
0.73 |
|
| 2016 |
Vackel A, Nakamura T, Sampath S. Mechanical Behavior of Spray-Coated Metallic Laminates Journal of Thermal Spray Technology. 25: 1009-1019. DOI: 10.1007/S11666-016-0404-X |
0.541 |
|
| 2015 |
Dwivedi G, Flynn K, Resnick M, Sampath S, Gouldstone A. Bioinspired hybrid materials from spray-formed ceramic templates. Advanced Materials (Deerfield Beach, Fla.). 27: 3073-8. PMID 25855576 DOI: 10.1002/Adma.201500303 |
0.78 |
|
| 2015 |
Viswanathan V, Dwivedi G, Sampath S. Multilayer, multimaterial thermal barrier coating systems: Design, synthesis, and performance assessment Journal of the American Ceramic Society. 98: 1769-1777. DOI: 10.1111/Jace.13563 |
0.702 |
|
| 2015 |
Sampath S, Herman H. In Memoriam: Richard J. Gambino (1935-2014) Ieee Transactions On Magnetics. 51: 1-2. DOI: 10.1109/Tmag.2014.2384398 |
0.511 |
|
| 2015 |
Ramakrishnan G, Dwivedi G, Sampath S, Orlov A. Development and optimization of thermal sprayed ceramic microfiltration membranes Journal of Membrane Science. 489: 106-111. DOI: 10.1016/J.Memsci.2015.03.094 |
0.537 |
|
| 2015 |
Kotlan J, Seshadri RC, Sampath S, Ctibor P, Pala Z, Musalek R. On the dielectric strengths of atmospheric plasma sprayed Al2O3, Y2O3, ZrO2-7% Y2O3 and (Ba,Sr)TiO3 coatings Ceramics International. DOI: 10.1016/j.ceramint.2015.05.066 |
0.418 |
|
| 2015 |
Vackel A, Dwivedi G, Sampath S. Structurally Integrated, Damage-Tolerant, Thermal Spray Coatings Jom. 67: 1540-1553. DOI: 10.1007/S11837-015-1400-1 |
0.705 |
|
| 2015 |
Dwivedi G, Flynn K, Resnick M, Sampath S, Gouldstone A. Bioinspired hybrid materials from spray-formed ceramic templates Advanced Materials. 27: 3073-3078. DOI: 10.1002/adma.201500303 |
0.527 |
|
| 2015 |
Sampath S. Durable multilayered, multifunctional thermal barrier coatings demonstrated American Ceramic Society Bulletin. 94: 22-23. |
0.441 |
|
| 2014 |
Eriksen R, Gopalan S, Sampath S, Chen Y. LSM protective coatings on stainless steel as interconnects for solid oxide fuel cells Materials Research Society Symposium Proceedings. 1644. DOI: 10.1557/Opl.2014.330 |
0.49 |
|
| 2014 |
Krause AR, Senturk BS, Garces HF, Dwivedi G, Ortiz AL, Sampath S, Padture NP. 2ZrO2·Y2O3 thermal barrier coatings resistant to degradation by molten CMAS: Part I, Optical basicity considerations and processing Journal of the American Ceramic Society. 97: 3943-3949. DOI: 10.1111/Jace.13210 |
0.705 |
|
| 2014 |
Viswanathan V, Dwivedi G, Sampath S. Engineered Multilayer Thermal Barrier Coatings for Enhanced Durability and Functional Performance Journal of the American Ceramic Society. 97: 2770-2778. DOI: 10.1111/Jace.13033 |
0.741 |
|
| 2014 |
Dwivedi G, Viswanathan V, Sampath S, Shyam A, Lara-Curzio E. Fracture toughness of plasma-sprayed thermal barrier ceramics: Influence of processing, microstructure, and thermal aging Journal of the American Ceramic Society. 97: 2736-2744. DOI: 10.1111/Jace.13021 |
0.677 |
|
| 2014 |
Ghabchi A, Sampath S, Holmberg K, Varis T. Damage mechanisms and cracking behavior of thermal sprayed WC-CoCr coating under scratch testing Wear. 313: 97-105. DOI: 10.1016/J.Wear.2014.02.017 |
0.826 |
|
| 2014 |
Han SJ, Chen Y, Sampath S. Role of process conditions on the microstructure, stoichiometry and functional performance of atmospheric plasma sprayed La(Sr)MnO3 coatings Journal of Power Sources. 259: 245-254. DOI: 10.1016/J.Jpowsour.2014.02.073 |
0.587 |
|
| 2014 |
Dwivedi G, Tan Y, Viswanathan V, Sampath S. Process-Property Relationship for Air Plasma-Sprayed Gadolinium Zirconate Coatings Journal of Thermal Spray Technology. 24: 454-466. DOI: 10.1007/S11666-014-0196-9 |
0.744 |
|
| 2014 |
Valarezo A, Dwivedi G, Sampath S, Musalek R, Matejicek J. Elastic and Anelastic Behavior of TBCs Sprayed at High-Deposition Rates Journal of Thermal Spray Technology. 24: 160-167. DOI: 10.1007/S11666-014-0154-6 |
0.681 |
|
| 2014 |
Varis T, Suhonen T, Ghabchi A, Valarezo A, Sampath S, Liu X, Hannula SP. Formation mechanisms, structure, and properties of HVOF-sprayed WC-CoCr coatings: An approach toward process maps Journal of Thermal Spray Technology. 23: 1009-1018. DOI: 10.1007/S11666-014-0110-5 |
0.838 |
|
| 2014 |
Senturk BS, Garces HF, Ortiz AL, Dwivedi G, Sampath S, Padture NP. CMAS-resistant plasma sprayed thermal barrier coatings based on Y 2O3-Stabilized ZrO2 with Al3+ and Ti4+ solute additions Journal of Thermal Spray Technology. 23: 708-715. DOI: 10.1007/S11666-014-0077-2 |
0.683 |
|
| 2013 |
Cinca N, Isalgué A, Fernández J, Sampath S. NiTi Splat Features during Vacuum Thermal Spraying onto Several Substrates Materials Science Forum. 357-361. DOI: 10.4028/Www.Scientific.Net/Msf.738-739.357 |
0.565 |
|
| 2013 |
Fu G, Zuo L, Longtin J, Chen Y, Sampath S. Progress on searching optimal thermal spray parameters for magnesium silicide Materials Research Society Symposium Proceedings. 1490: 173-177. DOI: 10.1557/Opl.2013.27 |
0.562 |
|
| 2013 |
Dwivedi G, Nakamura T, Sampath S. Determination of thermal spray coating property with curvature measurements Journal of Thermal Spray Technology. 22: 1337-1347. DOI: 10.1007/S11666-013-9981-0 |
0.712 |
|
| 2013 |
Gupta M, Dwivedi G, Nylén P, Vackel A, Sampath S. An experimental study of microstructure-property relationships in thermal barrier coatings Journal of Thermal Spray Technology. 22: 659-670. DOI: 10.1007/S11666-013-9915-X |
0.724 |
|
| 2013 |
Okajima Y, Nakamura T, Sampath S. Effect of Powder Injection on the Interfacial Fracture Toughness of Plasma-Sprayed Zirconia Journal of Thermal Spray Technology. 22: 166-174. DOI: 10.1007/S11666-013-9898-7 |
0.472 |
|
| 2013 |
Zois D, Wentz T, Dey R, Sampath S, Weyant CM. Simplified model for description of HVOF NiCr coating properties through experimental design and diagnostic measurements Journal of Thermal Spray Technology. 22: 299-315. DOI: 10.1007/S11666-013-9888-9 |
0.52 |
|
| 2013 |
Chen Y, Tan Y, Tessarini S, Sampath S. Integrated Study of APS YSZ Coatings with Different Spray Angle Journal of Thermal Spray Technology. 22: 110-115. DOI: 10.1007/S11666-012-9841-3 |
0.549 |
|
| 2013 |
Sampath S. Opportunities for thermal spray in functional materials, electronics, and sensors Advanced Materials and Processes. 171: 69-70. |
0.389 |
|
| 2012 |
Sampath S, Schulz U, Jarligo MO, Kuroda S. Processing science of advanced thermal-barrier systems Mrs Bulletin. 37: 903-910. DOI: 10.1557/Mrs.2012.233 |
0.493 |
|
| 2012 |
Drexler JM, Chen CH, Gledhill AD, Shinoda K, Sampath S, Padture NP. Plasma sprayed gadolinium zirconate thermal barrier coatings that are resistant to damage by molten Ca-Mg-Al-silicate glass Surface and Coatings Technology. 206: 3911-3916. DOI: 10.1016/J.Surfcoat.2012.03.051 |
0.442 |
|
| 2012 |
Bolelli G, Cannillo V, Lusvarghi L, Rosa R, Valarezo A, Choi WB, Dey R, Weyant C, Sampath S. Functionally graded WC–Co/NiAl HVOF coatings for damage tolerance, wear and corrosion protection Surface and Coatings Technology. 206: 2585-2601. DOI: 10.1016/J.Surfcoat.2011.11.018 |
0.423 |
|
| 2012 |
Shinoda K, Colmenares-Angulo J, Valarezo A, Sampath S. Effect of Deposition Rate on the Stress Evolution of Plasma-Sprayed Yttria-Stabilized Zirconia Journal of Thermal Spray Technology. 21: 1224-1233. DOI: 10.1007/S11666-012-9807-5 |
0.449 |
|
| 2012 |
Tan Y, Srinivasan V, Nakamura T, Sampath S, Bertrand P, Bertrand G. Optimizing compliance and thermal conductivity of plasma sprayed thermal barrier coatings via controlled powders and processing strategies Journal of Thermal Spray Technology. 21: 950-962. DOI: 10.1007/S11666-012-9780-Z |
0.566 |
|
| 2011 |
Drexler JM, Gledhill AD, Shinoda K, Vasiliev AL, Reddy KM, Sampath S, Padture NP. Jet engine coatings for resisting volcanic ash damage. Advanced Materials (Deerfield Beach, Fla.). 23: 2419-24. PMID 21484889 DOI: 10.1002/Adma.201004783 |
0.369 |
|
| 2011 |
Dwivedi G, Nakamura T, Sampath S. Controlled introduction of anelasticity in plasma-sprayed ceramics Journal of the American Ceramic Society. 94. DOI: 10.1111/J.1551-2916.2011.04494.X |
0.722 |
|
| 2011 |
Tran ATT, Hyland MM, Shinoda K, Sampath S. Influence of substrate surface conditions on the deposition and spreading of molten droplets Thin Solid Films. 519: 2445-2456. DOI: 10.1016/J.Tsf.2010.11.047 |
0.44 |
|
| 2011 |
Tran ATT, Hyland MM, Shinoda K, Sampath S. Inhibition of molten droplet deposition by substrate surface hydroxides Surface & Coatings Technology. 206: 1283-1292. DOI: 10.1016/J.Surfcoat.2011.08.041 |
0.43 |
|
| 2011 |
Shinoda K, Liang S, Sampath S, Gambino RJ. Processing effects on in-flight particle state and functional coating properties of plasma-sprayed manganese zinc ferrite Materials Science and Engineering: B. 176: 22-31. DOI: 10.1016/J.Mseb.2010.08.007 |
0.356 |
|
| 2011 |
Gledhill AD, Reddy KM, Drexler JM, Shinoda K, Sampath S, Padture NP. Mitigation of damage from molten fly ash to air-plasma-sprayed thermal barrier coatings Materials Science and Engineering A. 528: 7214-7221. DOI: 10.1016/J.Msea.2011.06.041 |
0.523 |
|
| 2011 |
Drexler JM, Shinoda K, Ortiz AL, Li D, Vasiliev AL, Gledhill AD, Sampath S, Padture NP. Corrigendum to “Air-plasma-sprayed thermal barrier coatings that are resistant to high-temperature attack by glassy deposits” [Acta Mater 58 (2010) 6835–6844] Acta Materialia. 59: 2241. DOI: 10.1016/J.Actamat.2010.12.009 |
0.473 |
|
| 2011 |
Valarezo A, Sampath S. An integrated assessment of process-microstructure-property relationships for thermal-sprayed NiCr coatings Journal of Thermal Spray Technology. 20: 1244-1258. DOI: 10.1007/S11666-011-9665-6 |
0.586 |
|
| 2011 |
Colmenares-Angulo J, Shinoda K, Wentz T, Zhang W, Tan Y, Sampath S. On the Response of Different Particle State Sensors to Deliberate Process Variations Journal of Thermal Spray Technology. 20: 1035-1048. DOI: 10.1007/S11666-011-9653-X |
0.341 |
|
| 2011 |
Drexler JM, Gledhill AD, Shinoda K, Vasiliev AL, Reddy KM, Sampath S, Padture NP. Jet Engine Coatings: Jet Engine Coatings for Resisting Volcanic Ash Damage (Adv. Mater. 21/2011) Advanced Materials. 23: 2388-2388. DOI: 10.1002/Adma.201190077 |
0.429 |
|
| 2011 |
Weyant C, Sampath S. Engineered thermal spray coatings for bridge repair and reclamation Advanced Materials and Processes. 169: 64-65. |
0.426 |
|
| 2010 |
Luzin V, Prask H-, Gnaupel-Herold T, Sampath S. Use of neutron diffraction for stress measurements in thin and thick thermal sprayed coatings International Heat Treatment & Surface Engineering. 4: 17-24. DOI: 10.1179/174951410X12572442577426 |
0.489 |
|
| 2010 |
Tan Y, Longtin JP, Sampath S, Zhu D. Temperature-gradient effects in thermal barrier coatings: An investigation through modeling, high heat flux test, and embedded sensor Journal of the American Ceramic Society. 93: 3418-3426. DOI: 10.1111/J.1551-2916.2010.03889.X |
0.524 |
|
| 2010 |
Valarezo A, Bolelli G, Choi WB, Sampath S, Cannillo V, Lusvarghi L, Rosa R. Damage tolerant functionally graded WC–Co/Stainless Steel HVOF coatings Surface and Coatings Technology. 205: 2197-2208. DOI: 10.1016/J.Surfcoat.2010.08.148 |
0.528 |
|
| 2010 |
Shinoda K, Demura M, Murakami H, Kuroda S, Sampath S. Characterization of crystallographic texture in plasma-sprayed splats by electron-backscattered diffraction Surface & Coatings Technology. 204: 3614-3618. DOI: 10.1016/J.Surfcoat.2010.04.023 |
0.369 |
|
| 2010 |
Drexler JM, Shinoda K, Ortiz AL, Li D, Vasiliev AL, Gledhill AD, Sampath S, Padture NP. Air-plasma-sprayed thermal barrier coatings that are resistant to high-temperature attack by glassy deposits Acta Materialia. 58: 6835-6844. DOI: 10.1016/J.Actamat.2010.09.013 |
0.511 |
|
| 2010 |
Tan Y, Shyam A, Choi WB, Lara-Curzio E, Sampath S. Anisotropic elastic properties of thermal spray coatings determined via resonant ultrasound spectroscopy Acta Materialia. 58: 5305-5315. DOI: 10.1016/J.Actamat.2010.06.003 |
0.594 |
|
| 2010 |
Valarezo A, Choi WB, Chi W, Gouldstone A, Sampath S. Process control and characterization of NiCr coatings by HVOF-DJ2700 system: A process map approach Journal of Thermal Spray Technology. 19: 852-865. DOI: 10.1007/S11666-010-9492-1 |
0.541 |
|
| 2010 |
Sampath S. Thermal spray applications in electronics and sensors: Past, present, and future Journal of Thermal Spray Technology. 19: 921-949. DOI: 10.1007/S11666-010-9475-2 |
0.448 |
|
| 2010 |
Dwivedi G, Wentz T, Sampath S, Nakamura T. Assessing process and coating reliability through monitoring of process and design relevant coating properties Journal of Thermal Spray Technology. 19: 695-712. DOI: 10.1007/S11666-009-9467-2 |
0.682 |
|
| 2010 |
Srinivasan V, Sampath S. Estimation of molten content of the spray stream from analysis of experimental particle diagnostics Journal of Thermal Spray Technology. 19: 476-483. DOI: 10.1007/S11666-009-9439-6 |
0.436 |
|
| 2010 |
Shinoda K, Tan Y, Sampath S. Powder Loading Effects of Yttria-Stabilized Zirconia in Atmospheric dc Plasma Spraying Plasma Chemistry and Plasma Processing. 30: 761-778. DOI: 10.1007/S11090-010-9250-7 |
0.395 |
|
| 2009 |
Sampath S. Thermal sprayed ceramic coatings: fundamental issues and application considerations International Journal of Materials and Product Technology. 35: 425-448. DOI: 10.1504/Ijmpt.2009.025691 |
0.57 |
|
| 2009 |
Tan Y, Longtin JP, Sampath S, Wang H. Effect of the starting microstructure on the thermal properties of as-sprayed and thermally exposed plasma-sprayed YSZ coatings Journal of the American Ceramic Society. 92: 710-716. DOI: 10.1111/J.1551-2916.2009.02953.X |
0.506 |
|
| 2009 |
Li Y, Chi W, Sampath S, Goland A, Herman H, Allen AJ, Ilavsky J. Process-controlled plasma-sprayed Yttria-stabilized zirconia coatings: New insights from ultrasmall-angle x-ray scattering Journal of the American Ceramic Society. 92: 491-500. DOI: 10.1111/J.1551-2916.2008.02887.X |
0.737 |
|
| 2009 |
Cannillo V, Colmenares-Angulo J, Lusvarghi L, Pierli F, Sampath S. In vitro characterisation of plasma-sprayed apatite/wollastonite glass–ceramic biocoatings on titanium alloys Journal of the European Ceramic Society. 29: 1665-1677. DOI: 10.1016/J.Jeurceramsoc.2008.09.022 |
0.564 |
|
| 2009 |
Cannillo V, Pierli F, Sampath S, Siligardi C. Thermal and physical characterisation of apatite/wollastonite bioactive glass–ceramics Journal of the European Ceramic Society. 29: 611-619. DOI: 10.1016/J.Jeurceramsoc.2008.06.034 |
0.572 |
|
| 2009 |
Sampath S, Srinivasan V, Valarezo A, Vaidya A, Streibl T. Sensing, Control, and In Situ Measurement of Coating Properties: An Integrated Approach Toward Establishing Process-Property Correlations Journal of Thermal Spray Technology. 18: 243-255. DOI: 10.1007/S11666-009-9314-5 |
0.674 |
|
| 2009 |
Choi WB, Prchlik L, Sampath S, Gouldstone A. Indentation of metallic and cermet thermal spray coatings Journal of Thermal Spray Technology. 18: 58-64. DOI: 10.1007/S11666-008-9247-4 |
0.82 |
|
| 2009 |
Choi WB, Wu Y, Sampath S, Gouldstone A. Modified indentation techniques to probe inelasticity in Ni-5%Al coatings from different processes Journal of Thermal Spray Technology. 18: 65-74. DOI: 10.1007/S11666-008-9243-8 |
0.524 |
|
| 2009 |
Zhang W, Sampath S. A universal method for representation of in-flight particle characteristics in thermal spray processes Journal of Thermal Spray Technology. 18: 23-34. DOI: 10.1007/S11666-008-9214-0 |
0.421 |
|
| 2009 |
Colmenares-Angulo JR, Cannillo V, Lusvarghi L, Sola A, Sampath S. Role of process type and process conditions on phase content and physical properties of thermal sprayed TiO2 coatings Journal of Materials Science. 44: 2276-2287. DOI: 10.1007/S10853-008-3044-9 |
0.576 |
|
| 2008 |
Luzin V, Valarezo A, Sampath S. Through-Thickness Residual Stress Measurement in Metal and Ceramic Spray Coatings by Neutron Diffraction Materials Science Forum. 315-320. DOI: 10.4028/Www.Scientific.Net/Msf.571-572.315 |
0.556 |
|
| 2008 |
Liu Y, Nakamura T, Dwivedi G, Valarezo A, Sampath S. Anelastic behavior of plasma-sprayed zirconia coatings Journal of the American Ceramic Society. 91: 4036-4043. DOI: 10.1111/J.1551-2916.2008.02789.X |
0.731 |
|
| 2008 |
Chi W, Sampath S, Wang H. Microstructure-thermal conductivity relationships for plasma-sprayed yttria-stabilized zirconia coatings Journal of the American Ceramic Society. 91: 2636-2645. DOI: 10.1111/J.1551-2916.2008.02476.X |
0.584 |
|
| 2008 |
Vaidya A, Srinivasan V, Streibl T, Friis M, Chi W, Sampath S. Process maps for plasma spraying of yttria-stabilized zirconia: An integrated approach to design, optimization and reliability Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 497: 239-253. DOI: 10.1016/J.Msea.2008.07.058 |
0.51 |
|
| 2008 |
Guilemany JM, Cinca N, Fernández J, Sampath S. Erosion, Abrasive, and Friction Wear Behavior of Iron Aluminide Coatings Sprayed by HVOF Journal of Thermal Spray Technology. 17: 762-773. DOI: 10.1007/S11666-008-9252-7 |
0.543 |
|
| 2007 |
Liang S, Ravi BG, Sampath S, Gambino RJ. Atmospheric Plasma Sprayed Cobalt Ferrite Coatings for Magnetostrictive Sensor Applications Ieee Transactions On Magnetics. 43: 2391-2393. DOI: 10.1109/Tmag.2007.893840 |
0.523 |
|
| 2007 |
Prchlik L, Sampath S. Effect of the microstructure of thermally sprayed coatings on friction and wear response under lubricated and dry sliding conditions Wear. 262: 11-23. DOI: 10.1016/J.Wear.2006.03.042 |
0.817 |
|
| 2007 |
Ravi BG, Guo XZ, Yan QY, Gambino RJ, Sampath S, Parise JB. Phase evolution and magnetic properties of Al substituted yttrium iron garnet nanopowders and plasma-sprayed coatings Surface and Coatings Technology. 201: 7597-7605. DOI: 10.1016/J.Surfcoat.2007.02.024 |
0.464 |
|
| 2007 |
Li J, Longtin JP, Tankiewicz S, Gouldstone A, Sampath S. Interdigital capacitive strain gauges fabricated by direct-write thermal spray and ultrafast laser micromachining Sensors and Actuators, a: Physical. 133: 1-8. DOI: 10.1016/J.Sna.2006.04.008 |
0.392 |
|
| 2007 |
Li L, Kharas B, Zhang H, Sampath S. Suppression of crystallization during high velocity impact quenching of alumina droplets: Observations and characterization Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 456: 35-42. DOI: 10.1016/J.Msea.2006.11.132 |
0.408 |
|
| 2007 |
Liu Y, Nakamura T, Srinivasan V, Vaidya A, Gouldstone A, Sampath S. Non-linear elastic properties of plasma-sprayed zirconia coatings and associated relationships with processing conditions Acta Materialia. 55: 4667-4678. DOI: 10.1016/J.Actamat.2007.04.037 |
0.67 |
|
| 2007 |
Choi WB, Li L, Luzin V, Neiser R, Gnäupel-Herold T, Prask HJ, Sampath S, Gouldstone A. Integrated characterization of cold sprayed aluminum coatings Acta Materialia. 55: 857-866. DOI: 10.1016/J.Actamat.2006.09.006 |
0.578 |
|
| 2007 |
Chi W, Sampath S, Wang H. Comparison of the Thermal Transport Property Measurements of Thermally Sprayed Coatings by the Laser and Xenon Flash Techniques Journal of Thermal Spray Technology. 16: 444-448. DOI: 10.1007/S11666-007-9049-0 |
0.532 |
|
| 2007 |
Zhang W, Wei GH, Zhang H, Zheng LL, Welch DO, Sampath S. Toward the Achievement of Substrate Melting and Controlled Solidification in Thermal Spraying Plasma Chemistry and Plasma Processing. 27: 717-736. DOI: 10.1007/S11090-007-9104-0 |
0.445 |
|
| 2007 |
Srinivasan V, Friis M, Vaidya A, Streibl T, Sampath S. Particle Injection in Direct Current Air Plasma Spray: Salient Observations and Optimization Strategies Plasma Chemistry and Plasma Processing. 27: 609-623. DOI: 10.1007/S11090-007-9089-8 |
0.577 |
|
| 2007 |
Yuhong W, Meng Q, Giannuzzi LA, Sampath S, Gouldstone A. Focused ion beam study of Ni5Al single splat microstructure Materials Research Society Symposium Proceedings. 983: 1-5. |
0.387 |
|
| 2006 |
Chi W, Srinivasan V, Sharma A, Sampath S, Gambino R. Processing-Microstructure-Property Relations in Anisotropic Thermal Sprayed Composites Mrs Proceedings. 977. DOI: 10.1557/PROC-977-0977-FF04-15 |
0.475 |
|
| 2006 |
Li L, Vaidya A, Sampath S, Xiong H, Zheng L. Particle characterization and splat formation of plasma sprayed zirconia Journal of Thermal Spray Technology. 15: 97-105. DOI: 10.1361/105996306X92668 |
0.553 |
|
| 2006 |
Tan Y, Longtin JP, Sampath S. Modeling thermal conductivity of thermal spray coatings: Comparing predictions to experiments Proceedings of the International Thermal Spray Conference. 545-552. DOI: 10.1361/105996306X147216 |
0.52 |
|
| 2006 |
Srinivasan V, Sampath S, Vaidya A, Streibl T, Friis M. On the reproducibility of air plasma spray process and control of particle state Journal of Thermal Spray Technology. 15: 739-743. DOI: 10.1361/105996306X147199 |
0.41 |
|
| 2006 |
Chi W, Sampath S, Wang H. Ambient and high-temperature thermal conductivity of thermal sprayed coatings Journal of Thermal Spray Technology. 15: 773-778. DOI: 10.1361/105996306X146730 |
0.568 |
|
| 2006 |
Tan Y, Sharma A, Longtin JP, Sampath S, Wang H. Image-based modeling for assessing thermal conductivity of thermal spray coatings atambientand high temperature American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. DOI: 10.1115/IMECE2006-15972 |
0.484 |
|
| 2006 |
Kharas B(, Wei G, Sampath S, Zhang H. Morphology and microstructure of thermal plasma sprayed silicon splats and coatings Surface & Coatings Technology. 201: 1454-1463. DOI: 10.1016/J.Surfcoat.2006.02.014 |
0.457 |
|
| 2006 |
Deshpande S, Sampath S, Zhang H. Mechanisms of oxidation and its role in microstructural evolution of metallic thermal spray coatings—Case study for Ni–Al Surface & Coatings Technology. 200: 5395-5406. DOI: 10.1016/J.Surfcoat.2005.07.072 |
0.568 |
|
| 2006 |
Turunen E, Varis T, Hannula S-, Vaidya A, Kulkarni A, Gutleber J, Sampath S, Herman H. On the role of particle state and deposition procedure on mechanical, tribological and dielectric response of high velocity oxy-fuel sprayed alumina coatings Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 415: 1-11. DOI: 10.1016/J.Msea.2005.08.226 |
0.753 |
|
| 2006 |
Guo XZ, Ravi BG, Yan QY, Gambino RJ, Sampath S, Margolies J, Parise JB. Phase and microstructure evolution in precursor plasma-sprayed YIG coatings Ceramics International. 32: 61-66. DOI: 10.1016/J.Ceramint.2005.02.001 |
0.539 |
|
| 2006 |
Streibl T, Vaidya A, Friis M, Srinivasan V, Sampath S. A Critical Assessment of Particle Temperature Distributions During Plasma Spraying: Experimental Results for YSZ Plasma Chemistry and Plasma Processing. 26: 73-102. DOI: 10.1007/S11090-005-8727-2 |
0.594 |
|
| 2005 |
Li L, Vaidya A, Streibl T, Sampath S, Gouldstone A, Luzin V, Prask H. Residual Stress Analysis of Thermal Sprayed Molybdenum Deposit Materials Science Forum. 607-612. DOI: 10.4028/Www.Scientific.Net/Msf.490-491.607 |
0.518 |
|
| 2005 |
Sharma A, Gambino RJ, Sampath S. Electrical Conduction in Thermally Sprayed Thin Metallic Coatings Mrs Proceedings. 890. DOI: 10.1557/Proc-0890-Y09-11 |
0.372 |
|
| 2005 |
Yan QY, Gambino RJ, Sampath S, Huang Q. Neutron diffraction and ferromagnetic resonance studies on plasma-sprayed MnZn ferrite films Journal of Applied Physics. 97: 33902. DOI: 10.1063/1.1831551 |
0.31 |
|
| 2005 |
Vaidya A, Streibl T, Li L, Sampath S, Kovarik O, Greenlaw R. An integrated study of thermal spray process–structure–property correlations: A case study for plasma sprayed molybdenum coatings Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 403: 191-204. DOI: 10.1016/J.Msea.2005.04.056 |
0.605 |
|
| 2005 |
Guo XZ, Ravi BG, Devi PS, Hanson JC, Margolies J, Gambino RJ, Parise JB, Sampath S. Synthesis of yttrium iron garnet (YIG) by citrate-nitrate gel combustion and precursor plasma spray processes Journal of Magnetism and Magnetic Materials. 295: 145-154. DOI: 10.1016/J.Jmmm.2005.01.007 |
0.365 |
|
| 2005 |
Kulkarni AA, Sampath S, Goland A, Herman H, Allen AJ, Ilavsky J, Gong W, Gopalan S. Plasma spray coatings for producing next-generation supported membranes Topics in Catalysis. 32: 241-249. DOI: 10.1007/S11244-005-2905-6 |
0.697 |
|
| 2004 |
Branco JRT, Gansert R, Sampath S, Berndt CC, Herman H. Solid particle erosion of plasma sprayed ceramic coatings Materials Research-Ibero-American Journal of Materials. 7: 147-153. DOI: 10.1590/S1516-14392004000100020 |
0.765 |
|
| 2004 |
Chen Q, Tong T, Longtin JP, Tankiewicz S, Sampath S, Gambino RJ. Novel sensor fabrication using direct-write thermal spray and precision laser micromachining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 830-836. DOI: 10.1115/1.1813481 |
0.368 |
|
| 2004 |
Parukuttyamma SD, Margolis J, Liu H, Grey CP, Sampath S, Herman H, Parise JB. Yttrium Aluminum Garnet (YAG) Films through a Precursor Plasma Spraying Technique Journal of the American Ceramic Society. 84: 1906-1908. DOI: 10.1111/J.1151-2916.2001.Tb00935.X |
0.648 |
|
| 2004 |
Raja MM, Gambino RJ, Sampath S, Greenlaw R. Thermal sprayed thick-film anisotropic magnetoresistive sensors Ieee Transactions On Magnetics. 40: 2685-2687. DOI: 10.1109/Tmag.2004.832249 |
0.312 |
|
| 2004 |
Yan QY, Gambino RJ, Sampath S. Plasma-sprayed MnZn ferrites with insulated fine grains and increased resistivity for high-frequency applications Ieee Transactions On Magnetics. 40: 3346-3351. DOI: 10.1109/Tmag.2004.831658 |
0.348 |
|
| 2004 |
Yan QY, Gambino RJ, Baumberger E, Lewis LH, Sampath S. Exchange bias in plasma-sprayed MnZn ferrite Ieee Transactions On Magnetics. 40: 2787-2789. DOI: 10.1109/Tmag.2004.829295 |
0.384 |
|
| 2004 |
Wang G, Goswami R, Sampath S, Prasad V. Understanding the Heat Transfer and Solidification Plasma-Sprayed Yttria-Stabilized Zirconia Coatings Materials and Manufacturing Processes. 19: 259-272. DOI: 10.1081/Amp-120029855 |
0.482 |
|
| 2004 |
Li L, Wang XY, Wei G, Vaidya A, Zhang H, Sampath S. Substrate melting during thermal spray splat quenching Thin Solid Films. 468: 113-119. DOI: 10.1016/J.Tsf.2004.05.073 |
0.486 |
|
| 2004 |
Deshpande S, Kulkarni A, Sampath S, Herman H. Application of image analysis for characterization of porosity in thermal spray coatings and correlation with small angle neutron scattering Surface & Coatings Technology. 187: 6-16. DOI: 10.1016/J.Surfcoat.2004.01.032 |
0.746 |
|
| 2004 |
Kulkarni A, Gutleber J, Sampath S, Goland A, Lindquist WB, Herman H, Allen AJ, Dowd B. Studies of the microstructure and properties of dense ceramic coatings produced by high-velocity oxygen-fuel combustion spraying Materials Science and Engineering A. 369: 124-137. DOI: 10.1016/J.Msea.2003.10.295 |
0.739 |
|
| 2004 |
Sampath S, Jiang XY, Matejicek J, Prchlik L, Kulkarni A, Vaidya A. Role of thermal spray processing method on the microstructure, residual stress and properties of coatings: An integrated study of Ni-5 wt. % Al bond coats Materials Science and Engineering A. 364: 216-231. DOI: 10.1016/J.Msea.2003.08.023 |
0.848 |
|
| 2004 |
Xiong HB, Zheng LL, Sampath S, Williamson RL, Fincke JR. Three-dimensional simulation of plasma spray: Effects of carrier gas flow and particle injection on plasma jet and entrained particle behavior International Journal of Heat and Mass Transfer. 47: 5189-5200. DOI: 10.1016/J.Ijheatmasstransfer.2004.07.005 |
0.371 |
|
| 2004 |
Zhang H, Wang XY, Zheng LL, Sampath S. Numerical simulation of nucleation, solidification, and microstructure formation in thermal spraying International Journal of Heat and Mass Transfer. 47: 2191-2203. DOI: 10.1016/J.Ijheatmasstransfer.2003.11.030 |
0.361 |
|
| 2004 |
Yan Q, Gambino RJ, Sampath S, Lewis LH, Li L, Baumberger E, Vaidya A, Xiong H. Effects of zinc loss on the magnetic properties of plasma-sprayed MnZn ferrites Acta Materialia. 52: 3347-3353. DOI: 10.1016/J.Actamat.2004.03.032 |
0.46 |
|
| 2003 |
Ahn K, Wessels BW, Sampath S. Dielectric properties of plasma-spray-deposited BaTiO3 and Ba0.68Sr0.32TiO3 thick films Journal of Materials Research. 18: 1227-1231. DOI: 10.1557/Jmr.2003.0168 |
0.381 |
|
| 2003 |
Kulkarni A, Wang Z, Nakamura T, Sampath S, Goland A, Herman H, Allen J, Ilavsky J, Long G, Frahm J, Steinbrech RW. Comprehensive microstructural characterization and predictive property modeling of plasma-sprayed zirconia coatings Acta Materialia. 51: 2457-2475. DOI: 10.1016/S1359-6454(03)00030-2 |
0.755 |
|
| 2003 |
Matejicek J, Sampath S. In situ measurement of residual stresses and elastic moduli in thermal sprayed coatings part 1: Apparatus and analysis Acta Materialia. 51: 863-872. DOI: 10.1016/S1359-6454(02)00478-0 |
0.522 |
|
| 2003 |
Matejicek J, Sampath S, Gilmore D, Neiser R. In situ measurement of residual stresses and elastic moduli in thermal sprayed coatings. Part 2: processing effects on properties of Mo coatings Acta Materialia. 51: 873-885. DOI: 10.1016/S1359-6454(02)00477-9 |
0.555 |
|
| 2003 |
Wan YP, Sampath S, Prasad V, Williamson R, Fincke JR. An advanced model for plasma spraying of functionally graded materials Journal of Materials Processing Technology. 137: 110-116. DOI: 10.1016/S0924-0136(02)01096-8 |
0.435 |
|
| 2003 |
Prchlik L, Pisacka J, Sampath S. Deformation and strain distribution in plasma sprayed nickel-aluminum coating loaded by a spherical indenter Materials Science and Engineering A. 360: 264-274. DOI: 10.1016/S0921-5093(03)00414-3 |
0.774 |
|
| 2003 |
Kulkarni A, Vaidya A, Goland A, Sampath S, Herman H. Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 359: 100-111. DOI: 10.1016/S0921-5093(03)00342-3 |
0.759 |
|
| 2003 |
Sampath S, Jiang X, Kulkarni A, Matejicek J, Gilmore DL, Neiser RA. Development of process maps for plasma spray: case study for molybdenum Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 348: 54-66. DOI: 10.1016/S0921-5093(02)00642-1 |
0.567 |
|
| 2003 |
Gu Y, Nakamura T, Prchlik L, Sampath S, Wallace J. Micro - indentation and inverse analysis to characterize elastic - plastic graded materials Materials Science and Engineering A. 345: 223-233. DOI: 10.1016/S0921-5093(02)00462-8 |
0.771 |
|
| 2002 |
Ahn K, Wessels BW, Sampath S. Interfacial Layer Effects in Ba1-xSrxTiO3 Thick Films prepared by Plasma Spray Mrs Proceedings. 758. DOI: 10.1557/Proc-758-Ll2.7 |
0.337 |
|
| 2002 |
Devi PS, Margolis J, Parise JB, Grey CP, Sampath S, Herman H, Gafney HD. Single-step deposition of Eu-doped Y2O3 phosphor coatings through a precursor plasma spraying technique Journal of Materials Research. 17: 2771-2774. DOI: 10.1557/jmr.2002.0401 |
0.427 |
|
| 2002 |
Dent AH, DePalo S, Sampath S. Examination of the wear properties of HVOF sprayed nanostructured and conventional WC-Co cermets with different binder phase contents Journal of Thermal Spray Technology. 11: 551-558. DOI: 10.1361/105996302770348691 |
0.513 |
|
| 2002 |
Wang XY, Zhang H, Zheng LL, Sampath S. An integrated model for interaction between melt flow and non-equilibrium solidification in thermal spraying International Journal of Heat and Mass Transfer. 45: 2289-2301. DOI: 10.1016/S0017-9310(01)00328-3 |
0.322 |
|
| 2002 |
Wan YP, Fincke JR, Sampath S, Prasad V, Herman H. Modeling and experimental observation of evaporation from oxidizing molybdenum particles entrained in a thermal plasma jet International Journal of Heat and Mass Transfer. 45: 1007-1015. DOI: 10.1016/S0017-9310(01)00214-9 |
0.645 |
|
| 2002 |
Matějíček J, Sampath S, Gnäupel-Herold T, Prask HJ. Residual stress in sprayed Ni+5%Al coatings determined by neutron diffraction Applied Physics A. 74: 1692-1694. DOI: 10.1007/S003390101264 |
0.493 |
|
| 2001 |
Ahn K, Wessels BW, Greenlaw R, Sampath S. Dielectric Properties of Spray Deposited BaTiO3 and Ba0.68Sr0.32TiO3 Mrs Proceedings. 698. DOI: 10.1557/Proc-698-Q3.6.1 |
0.308 |
|
| 2001 |
Wan YP, Gupta V, Deng Q, Sampath S, Prasad V, Williamson R, Fincke JR. Modeling and visualization of plasma spraying of functionally graded materials and its application to the optimization of spray conditions Journal of Thermal Spray Technology. 10: 382-389. DOI: 10.1361/105996301770349475 |
0.434 |
|
| 2001 |
Prchlik L, Gutleber J, Sampath S. Deposition and properties of high-velocity-oxygen-fuel and plasma-sprayed Mo-Mo2C composite coatings Journal of Thermal Spray Technology. 10: 643-655. DOI: 10.1361/105996301770349178 |
0.839 |
|
| 2001 |
Wan YP, Zhang H, Jiang XY, Sampath S, Prasad V. Role of Solidification, Substrate Temperature and Reynolds Number on Droplet Spreading in Thermal Spray Deposition: Measurements and Modeling Journal of Heat Transfer-Transactions of the Asme. 123: 382-389. DOI: 10.1115/1.1351893 |
0.432 |
|
| 2001 |
Matejicek J, Sampath S. Intrinsic residual stresses in single splats produced by thermal spray processes Acta Materialia. 49: 1993-1999. DOI: 10.1016/S1359-6454(01)00099-4 |
0.543 |
|
| 2001 |
Dent AH, Patel A, Gutleber J, Tormey E, Sampath S, Herman H. High velocity oxy-fuel and plasma deposition of BaTiO3 and (Ba, Sr)TiO3 Materials Science and Engineering B-Advanced Functional Solid-State Materials. 87: 23-30. DOI: 10.1016/S0921-5107(01)00653-5 |
0.694 |
|
| 2001 |
Alcalá J, Gaudette F, Suresh S, Sampath S. Instrumented spherical micro-indentation of plasma-sprayed coatings Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 316: 1-10. DOI: 10.1016/S0921-5093(01)01252-7 |
0.55 |
|
| 2001 |
Sampath S, Jiang X. Splat formation and microstucture development during plasma spraying: Deposition temperature effects Materials Science and Engineering A. 304: 144-150. DOI: 10.1016/S0921-5093(00)01464-7 |
0.474 |
|
| 2001 |
Jiang X, Sampath S, Herman H. Grain morphology of molybdenum splats plasma-sprayed on glass substrates Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 299: 235-240. DOI: 10.1016/S0921-5093(00)01397-6 |
0.735 |
|
| 2001 |
Allen AJ, Long GG, Boukari H, Ilavsky J, Kulkarni A, Sampath S, Herman H, Goland AN. Microstructural characterization studies to relate the properties of thermal-spray coatings to feedstock and spray conditions ☆ Surface & Coatings Technology. 146: 544-552. DOI: 10.1016/S0257-8972(01)01433-5 |
0.743 |
|
| 2001 |
Goswami R, Herman H, Sampath S, Jiang X, Tian Y, Halada G. Plasma sprayed Mo–Mo oxide nanocomposites: synthesis and characterization Surface and Coatings Technology. 141: 220-226. DOI: 10.1016/S0257-8972(01)01234-8 |
0.745 |
|
| 2001 |
Prchlik L, Sampath S, Gutleber J, Bancke G, Ruff AW. Friction and wear properties of WC-Co and Mo-Mo2C based functionally graded materials Wear. 249: 1103-1115. DOI: 10.1016/S0043-1648(01)00839-0 |
0.824 |
|
| 2001 |
Jiang X, Wan Y, Herman H, Sampath S. Role of condensates and adsorbates on substrate surface on fragmentation of impinging molten droplets during thermal spray Thin Solid Films. 385: 132-141. DOI: 10.1016/S0040-6090(01)00769-6 |
0.731 |
|
| 2001 |
Wan YP, Fincke JR, Jiang XY, Sampath S, Prasad V, Herman H. Modeling of oxidation of molybdenum particles during plasma spray deposition Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 32: 475-481. DOI: 10.1007/S11663-001-0033-7 |
0.654 |
|
| 2000 |
Parukuttyammaa SD, Margolis J, Liu H, Parise JB, Grey CP, Sampath S, Gouma P, Herman H. Deposition and Characterization of Y3Al5O12 (YAG) Films and Powders by Plasma Spray Synthesis Mrs Proceedings. 658. DOI: 10.1557/Proc-658-Gg6.29 |
0.737 |
|
| 2000 |
Goswami R, Parise J, Herman H, Sampath S, Gambino R, Zhu Y, Welch D. Shock Synthesis of Nanocrystalline High -Pressure Phases in Semiconductors by High-Velocity Thermal Spray Mrs Proceedings. 638. DOI: 10.1557/Proc-638-F15.1.1 |
0.603 |
|
| 2000 |
Tan SY, Gambino RJ, Goswami R, Sampath S, Herman H. Electrical Characteristics of Thermal Spray Silicon Coatings Mrs Proceedings. 624. DOI: 10.1557/Proc-624-189 |
0.706 |
|
| 2000 |
Sampath S, Herman H, Patel A, Gambino R, Greenlaw R, Tormey E. Thermal Spray Techniques for Fabrication of Meso-Electronics and Sensors Mrs Proceedings. 624. DOI: 10.1557/Proc-624-181 |
0.702 |
|
| 2000 |
Herman H, Sampath S, McCune R. Thermal Spray: Current Status and Future Trends Mrs Bulletin. 25: 17-25. DOI: 10.1557/Mrs2000.119 |
0.713 |
|
| 2000 |
Sampath S, McCune R. Thermal-spray processing of materials Mrs Bulletin. 25: 12-16. DOI: 10.1557/Mrs2000.117 |
0.459 |
|
| 2000 |
Kulkarni A, Sampath S, Goland A, Herman H, Dowd B. Computed microtomography studies to characterize microstructure-property correlations in thermal sprayed alumina deposits Scripta Materialia. 43: 471-476. DOI: 10.1016/S1359-6462(00)00416-4 |
0.683 |
|
| 2000 |
Nakamura T, Wang T, Sampath S. Determination of properties of graded materials by inverse analysis and instrumented indentation Acta Materialia. 48: 4293-4306. DOI: 10.1016/S1359-6454(00)00217-2 |
0.394 |
|
| 2000 |
Wang GX, Prasad V, Sampath S. An integrated model for dendritic and planar interface growth and morphological transition in rapid solidification Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 31: 735-746. DOI: 10.1007/S11661-000-0015-4 |
0.386 |
|
| 1999 |
Kesler O, Matějíček J, Sampath S, Suresh S. Measurement of residual stress in plasma-sprayed composite coatings with graded and uniform compositions Materials Science Forum. 389-395. DOI: 10.4028/Www.Scientific.Net/Msf.308-311.389 |
0.443 |
|
| 1999 |
Sampath S, Smith WC, Jewett TJ, Kim H. Synthesis and Characterization of Grading Profiles in Plasma Sprayed NiCrAlY-Zirconia FGMs Materials Science Forum. 383-388. DOI: 10.4028/Www.Scientific.Net/Msf.308-311.383 |
0.49 |
|
| 1999 |
Dykhuizen RC, Smith MF, Gilmore DL, Neiser RA, Jiang X, Sampath S. Impact of high velocity cold spray particles Journal of Thermal Spray Technology. 8: 559-564. DOI: 10.1361/105996399770350250 |
0.38 |
|
| 1999 |
Wan YP, Prasad V, Wang G-, Sampath S, Fincke JR. Model and powder particle heating, melting, resolidification, and evaporation in plasma spraying processes Journal of Heat Transfer-Transactions of the Asme. 121: 691-699. DOI: 10.1115/1.2826034 |
0.423 |
|
| 1999 |
Matejicek J, Sampath S, Brand PC, Prask HJ. Quenching, thermal and residual stress in plasma sprayed deposits: NiCrAlY and YSZ coatings Acta Materialia. 47: 607-617. DOI: 10.1016/S1359-6454(98)00360-7 |
0.473 |
|
| 1999 |
Jiang X, Matejicek J, Sampath S. Substrate temperature effects on the splat formation, microstructure development and properties of plasma sprayed coatings: Part II: case study for molybdenum Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 272: 189-198. DOI: 10.1016/S0921-5093(99)00461-X |
0.689 |
|
| 1999 |
Sampath S, Jiang XY, Matejicek J, Leger AC, Vardelle A. Substrate temperature effects on splat formation, microstructure development and properties of plasma sprayed coatings Part I: Case study for partially stabilized zirconia☆ Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 272: 181-188. DOI: 10.1016/S0921-5093(99)00459-1 |
0.484 |
|
| 1999 |
Newman A, Sampath S, Herman H. Processing and properties of MoSi2–SiC and MoSi2–Al2O3 Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 261: 252-260. DOI: 10.1016/S0921-5093(98)01073-9 |
0.604 |
|
| 1999 |
Usmani S, Sampath S. Time-dependent friction response of plasma-sprayed molybdenum Wear. 225: 1131-1140. DOI: 10.1016/S0043-1648(98)00395-0 |
0.55 |
|
| 1998 |
Newman A, Jewett TJ, Sampath S, Berndt CC, Herman H. Indentation response of molybdenum disilicide Journal of Materials Research. 13: 2662-2671. DOI: 10.1557/Jmr.1998.0371 |
0.59 |
|
| 1998 |
Matejícek J, Sampath S, Dubsky J. X-ray residual stress measurement in metallic and ceramic plasma sprayed coatings Journal of Thermal Spray Technology. 7: 489-496. DOI: 10.1361/105996398770350701 |
0.521 |
|
| 1998 |
Kesler O, Matejicek J, Sampath S, Suresh S, Gnaeupel-Herold T, Brand PC, Prask HJ. Measurement of residual stress in plasma-sprayed metallic, ceramic and composite coatings Materials Science and Engineering A. 257: 215-224. DOI: 10.1016/S0921-5093(98)00860-0 |
0.462 |
|
| 1998 |
Herman H, Sampath S. Plasma spray forming Industrial Ceramics. 18: 29-X6. |
0.325 |
|
| 1998 |
Usmani S, Sampath S, Houck DL. Effect of microstructure and alloy additions on the sliding friction and wear of plasma sprayed molybdenum alloy coatings Proceedings of the International Thermal Spray Conference. 1: 127-131. |
0.392 |
|
| 1998 |
Sampath S, Usmani S, Houck DL. Applications of Mo and Mo-alloys as thermal spray coatings Tms Annual Meeting. 145-154. |
0.472 |
|
| 1997 |
Usmani S, Sampath S, Houck DL, Lee D. Effect of Carbide Grain Size on the Sliding and Abrasive Wear Behavior of Thermally Sprayed WC-Co Coatings Tribology Transactions. 40: 470-478. DOI: 10.1080/10402009708983682 |
0.561 |
|
| 1997 |
Kesler O, Finot M, Suresh S, Sampath S. Determination of processing-induced stresses and properties of layered and graded coatings: Experimental method and results for plasma-sprayed NiAl2O3 Acta Materialia. 45: 3123-3134. DOI: 10.1016/S1359-6454(97)00015-3 |
0.556 |
|
| 1997 |
Wang G-, Sampath S, Prasad V, Herman H. On the stability of rapid planar solidification during melt-substrate quenching Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 1035-1038. DOI: 10.1016/S0921-5093(97)80102-5 |
0.602 |
|
| 1997 |
Montavon G, Sampath S, Berndt CC, Herman H, Coddet C. Effects of the spray angle on splat morphology during thermal spraying Surface & Coatings Technology. 91: 107-115. DOI: 10.1016/S0257-8972(96)03137-4 |
0.664 |
|
| 1997 |
Neufuss K, Chráska P, Kolman B, Sampath S, Trávnícek Z. Properties of plasma-sprayed freestanding ceramic parts Journal of Thermal Spray Technology. 6: 434-438. DOI: 10.1007/S11666-997-0027-3 |
0.404 |
|
| 1997 |
Montavon G, Coddet C, Sampath S, Herman H, Berndt CC. Quality control of the intrinsic deposition efficiency from the controls of the splat morphologies and the deposit microstructure Journal of Thermal Spray Technology. 6: 153-166. DOI: 10.1007/S11666-997-0007-7 |
0.637 |
|
| 1996 |
Newman A, Jewett T, Sampath S, Herman H. Effect of Microstructure on the Properties of MoSi2 and its Composites Mrs Proceedings. 460. DOI: 10.1557/Proc-460-593 |
0.62 |
|
| 1996 |
Finot M, Suresh S, Bull C, Sampath S. Curvature changes during thermal cycling of a compositionally graded NiAl2O3 multi-layered material Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 205: 59-71. DOI: 10.1016/0921-5093(95)09892-5 |
0.388 |
|
| 1996 |
Usmani S, Sampath S. Erosion studies on duplex and graded ceramic overlay coatings Jom. 48: 51-54. DOI: 10.1007/Bf03223245 |
0.567 |
|
| 1996 |
Sampath S, Herman H. Rapid solidification and microstructure development during plasma spray deposition Journal of Thermal Spray Technology. 5: 445-456. DOI: 10.1007/Bf02645275 |
0.724 |
|
| 1995 |
Sampath S, Herman H, Shimoda N, Saito T. Thermal Spray Processing of FGMs Mrs Bulletin. 20: 27-31. DOI: 10.1557/S0883769400048880 |
0.734 |
|
| 1995 |
Lin CK, Leigh SH, Gansert RV, Murakami K, Sampath S, Herman H, Berndt CC. Investigation of cracking mechanisms of plasma sprayed alumina-13% titania by acoustic emission Mrs Proceedings. 409: 261-266. DOI: 10.1557/Proc-409-261 |
0.606 |
|
| 1995 |
Tiwari R, Sampath S, Gudmundsson B, Halada G, Clayton C, Herman H. Microstructure and tensile properties of L12—Type NiCrAl alloy prepared by vacuum plasma spray forming Scripta Metallurgica Et Materialia. 33: 1159-1162. DOI: 10.1016/0956-716X(95)00332-P |
0.619 |
|
| 1995 |
Sampath S, Gansert R, Herman H. Plasma-spray forming ceramics and layered composites Jom. 47: 30-33. DOI: 10.1007/Bf03221281 |
0.699 |
|
| 1995 |
Brogan JA, Berndt CC, Smith WCS, Gansert RV, Raghu S, Sampath S, Herman H. Real-time imaging of the plasma spray process—Work in progress Journal of Thermal Spray Technology. 4: 374-376. DOI: 10.1007/Bf02648638 |
0.626 |
|
| 1995 |
Montavon G, Sampath S, Berndt CC, Herman H, Coddet C. Effects of Vacuum Plasma Spray Processing Parameters on Splat Morphology Journal of Thermal Spray Technology. 4: 67-74. DOI: 10.1007/Bf02648530 |
0.691 |
|
| 1994 |
Sampath S, Herman H. Vacuum plasma spray forming of high temperature silicides Materials Research Society Symposium Proceedings. 322: 71-79. DOI: 10.1557/Proc-322-71 |
0.669 |
|
| 1994 |
Wayne SF, Sampath S, Anand V. Wear mechanisms in thermally-sprayed mo-based coatings Tribology Transactions. 37: 636-640. DOI: 10.1080/10402009408983340 |
0.465 |
|
| 1994 |
Herman H, Sampath S, Tiwarl R, Neiser R. Plasma spray forming of intermetallics and their composites Journal of Thermal Spray Technology. 3: 295-296. DOI: 10.1007/Bf02646276 |
0.735 |
|
| 1994 |
Sampath S, Wayne SF. Microstructure and properties of pLASMA-sPRAYED Mo-Mo2C composites Journal of Thermal Spray Technology. 3: 282-288. DOI: 10.1007/BF02646273 |
0.487 |
|
| 1993 |
Sampath S, Neiser R, Herman H, Kirkland J, Elam W. A structural investigation of a plasma sprayed Ni–Cr based alloy coating Journal of Materials Research. 8: 78-86. DOI: 10.1557/Jmr.1993.0078 |
0.723 |
|
| 1993 |
Sampath S. Microstructural characteristics of plasma spray consolidated amorphous powders Materials Science and Engineering A. 167: 1-10. DOI: 10.1016/0921-5093(93)90330-H |
0.533 |
|
| 1993 |
Sampath S, Herman H. Plasma spray forming metals, intermetallics, and composites Jom. 45: 42-49. DOI: 10.1007/Bf03222381 |
0.654 |
|
| 1992 |
Tiwari R, Herman H, Sampath S. Vacuum plasma spraying of MoSi2 and its composites Materials Science and Engineering: A. 155: 95-100. DOI: 10.1016/0921-5093(92)90316-S |
0.651 |
|
| 1992 |
Berndt CC, Brindley W, Goland AN, Herman H, Houck DL, Jones K, Miller RA, Neiser R, Riggs W, Sampath S, Smith M, Spanne P. Current problems in plasma spray processing Journal of Thermal Spray Technology. 1: 341-356. DOI: 10.1007/Bf02647162 |
0.748 |
|
| 1992 |
Wayne SF, Sampath S. Structure/property relationships in sintered and thermally sprayed WC-Co Journal of Thermal Spray Technology. 1: 307-315. DOI: 10.1007/BF02647158 |
0.474 |
|
| 1991 |
Sampath S, Tiwari R, Gudmundsson B, Herman H. Microstructure and properties of plasma-spray consolidated two-phase nickel aluminides Scripta Metallurgica Et Materialia. 25: 1425-1430. DOI: 10.1016/0956-716X(91)90427-3 |
0.67 |
|
| 1991 |
Tiwari R, Herman H, Sampath S, Gudmundsson B. Plasma spray consolidation of high temperature composites Materials Science and Engineering: A. 144: 127-131. DOI: 10.1016/0921-5093(91)90217-B |
0.667 |
|
| 1990 |
Tiwari R, Herman H, Sampath S. Spray Forming of MoSi2 and MoSi2-Based Composites Mrs Proceedings. 213. DOI: 10.1557/Proc-213-807 |
0.675 |
|
| 1987 |
Kirkland J, Neiser R, Herman H, Elam W, Sampath S, Skelton E, Gansert D, Wang H. Thermal Spraying Superconducting Oxide Coatings Advanced Ceramic Materials. 2: 401-410. DOI: 10.1111/J.1551-2916.1987.Tb00104.X |
0.702 |
|
| Show low-probability matches. |
