Year |
Citation |
Score |
2019 |
Vettraino LG, Zhang M, Carter JLW, Groza JR, Gibeling JC. A phenomenological understanding of the influence of processing methods on creep of Cu-8Cr-4Nb (GRCop-84) Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 756: 538-544. DOI: 10.1016/J.Msea.2019.04.074 |
0.356 |
|
2012 |
Erman A, Groza J, Li X, Choi H, Cao G. Nanoparticle effects in cast Mg-1 wt% SiC nano-composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 558: 39-43. DOI: 10.1016/J.Msea.2012.07.048 |
0.527 |
|
2012 |
Holland TB, Tran TB, Quach DV, Anselmi-Tamburini U, Groza JR, Mukherjee AK. Athermal and thermal mechanisms of sintering at high heating rates in the presence and absence of an externally applied field Journal of the European Ceramic Society. 32: 3675-3683. DOI: 10.1016/J.Jeurceramsoc.2012.05.027 |
0.603 |
|
2011 |
Langer J, Quach DV, Groza JR, Guillon O. A comparison between fast and sps apparatuses based on the sintering of oxide ceramics International Journal of Applied Ceramic Technology. 8: 1459-1467. DOI: 10.1111/J.1744-7402.2010.02604.X |
0.367 |
|
2011 |
Snyder A, Quach D, Groza JR, Fisher T, Hodson S, Stanciu LA. Spark Plasma Sintering of ZrB2-SiC-ZrC ultra-high temperature ceramics at 1800°C Materials Science and Engineering A. 528: 6079-6082. DOI: 10.1016/J.Msea.2011.04.026 |
0.411 |
|
2011 |
El-Atwani O, Quach DV, Efe M, Cantwell PR, Heim B, Schultz B, Stach EA, Groza JR, Allain JP. Multimodal grain size distribution and high hardness in fine grained tungsten fabricated by spark plasma sintering Materials Science and Engineering A. 528: 5670-5677. DOI: 10.1016/J.Msea.2011.04.015 |
0.476 |
|
2010 |
Walley JL, Heelan JL, Vettraino LG, Groza JR, Gibeling JC. The influence of post-processing on creep and microstructure of rolled Cu-8Cr-4Nb Materials Science and Engineering A. 527: 6956-6962. DOI: 10.1016/J.Msea.2010.07.051 |
0.411 |
|
2009 |
Tran TB, Groza JR, Shackelford JF. Nanoscale hydroxyapatite for bioceramics applications Ceramic Engineering and Science Proceedings. 29: 249-258. |
0.594 |
|
2008 |
Quach DV, Levchenko AA, Navrotsky A, Groza JR. Constraint of oxygen fugacity during field-assisted sintering: TiO 2 as a test case Journal of the American Ceramic Society. 91: 970-974. DOI: 10.1111/J.1551-2916.2007.02192.X |
0.318 |
|
2008 |
Choi KH, Choi YG, Park MW, Kodash VY, Groza JR, Lee JS. Effects of alumina additions on sintering behavior of Ce0.8Sm0.2O1.9 ceramics synthesized by Pechini method Journal of Alloys and Compounds. 463: 484-487. DOI: 10.1016/J.Jallcom.2007.09.076 |
0.389 |
|
2007 |
Stanciu L, Quach D, Faconti C, Groza JR, Raether F. Initial stages of sintering of alumina by thermo-optical measurements Journal of the American Ceramic Society. 90: 2716-2722. DOI: 10.1111/J.1551-2916.2007.01778.X |
0.341 |
|
2007 |
Sandu V, Aldica G, Badica P, Groza JR, Nita P. Preparation of pure and doped MgB2 by the field-assisted sintering technique and superconducting properties Superconductor Science and Technology. 20: 836-842. DOI: 10.1088/0953-2048/20/8/020 |
0.307 |
|
2007 |
Kodash VY, Groza JR, Aldica G, Toprak MS, Li S, Mamoun M. Field-activated sintering of skutterudites Scripta Materialia. 57: 509-511. DOI: 10.1016/J.Scriptamat.2007.05.032 |
0.458 |
|
2007 |
Nicula R, Turquier F, Stir M, Kodash VY, Groza JR, Burkel E. Quasicrystal phase formation in Al-Cu-Fe nanopowders during field-activated sintering (FAST) Journal of Alloys and Compounds. 434: 319-323. DOI: 10.1016/J.Jallcom.2006.08.195 |
0.402 |
|
2007 |
Aldica G, Khodash V, Badica P, Groza JR. Electrical conduction in initial field assisted sintering stages Journal of Optoelectronics and Advanced Materials. 9: 3863-3870. |
0.302 |
|
2007 |
Aldica G, Badica P, Groza JR. Field-assisted-sintering OfMgB2 superconductor doped with SiC and B4C Journal of Optoelectronics and Advanced Materials. 9: 1742-1745. |
0.315 |
|
2006 |
Groza JR. Nanocrystalline Powder Consolidation Methods Nanostructured Materials: Processing, Properties, and Applications: Second Edition. 173-233. DOI: 10.1016/B978-081551534-0.50007-5 |
0.357 |
|
2005 |
Quach DV, Stanciu LA, Kodash VY, Groza JR. One-step reaction and consolidation of structural ceramics and intermetallics Advanced Materials and Processes. 163: 46-47. |
0.38 |
|
2004 |
Stanciu LA, Groza JR, Jitianu A, Zaharescu M. Structural evolution during reaction to form aluminum titanate from sol-gel precursors Materials and Manufacturing Processes. 19: 641-650. DOI: 10.1081/Amp-200028090 |
0.441 |
|
2004 |
Viswanathan S, Groza J. Editorial: Effects of Materials Processing Under the Influence of Electric and Magnetic Fields Materials and Manufacturing Processes. 19. DOI: 10.1081/Amp-200028055 |
0.303 |
|
2004 |
Scarlat O, Mihaiu S, Aldica G, Groza J, Zaharescu M. Semiconducting densified SnO2-ceramics obtained by a novel sintering technique Journal of the European Ceramic Society. 24: 1049-1052. DOI: 10.1016/S0955-2219(03)00387-X |
0.426 |
|
2004 |
Stanciu L, Groza JR, Stoica L, Plapcianu C. Influence of powder precursors on reaction sintering of Al 2TiO5 Scripta Materialia. 50: 1259-1262. DOI: 10.1016/J.Scriptamat.2004.01.034 |
0.436 |
|
2004 |
Kodash VY, Groza JR, Cho KC, Klotz BR, Dowding RJ. Field-assisted sintering of Ni nanopowders Materials Science and Engineering A. 385: 367-371. DOI: 10.1016/j.msea.2004.06.075 |
0.324 |
|
2004 |
Zavaliangos A, Zhang J, Krammer M, Groza JR. Temperature evolution during field activated sintering Materials Science and Engineering A. 379: 218-228. DOI: 10.1016/J.Msea.2004.01.052 |
0.337 |
|
2004 |
Decker MW, Groza JR, Gibeling JC. Creep properties of an extruded copper-8% chromium-4% niobium alloy Materials Science and Engineering A. 369: 101-111. DOI: 10.1016/J.Msea.2003.10.306 |
0.385 |
|
2003 |
Phung X, Groza J, Stach EA, Williams LN, Ritchey SB. Surface characterization of metal nanoparticles Materials Science and Engineering: A. 359: 261-268. DOI: 10.1016/S0921-5093(03)00348-4 |
0.311 |
|
2003 |
Jianu A, Stanciu L, Groza JR, Lathe C, Burkel E. In situ analysis of phase transformation in sol-gel cogelified nanopowder mixture of Al2O3 and TiO2 using synchrotron X-ray radiation diffraction experiments Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions With Materials and Atoms. 199: 44-48. DOI: 10.1016/S0168-583X(02)01575-6 |
0.367 |
|
2003 |
Stanciu LA, Raether F, Groza JR. In-situ sintering studies on nano-alumina 2003 Nanotechnology Conference and Trade Show - Nanotech 2003. 3: 270-273. |
0.346 |
|
2003 |
Aldica G, Groza JR, Endo K, Kito H, Mihalache V. Enhanced superconducting properties in Li-doped BPSCCO high-Tc ceramics Journal of Optoelectronics and Advanced Materials. 5: 1003-1009. |
0.311 |
|
2002 |
Li X, Johnson J, Groza J, Prinz F. Processing and microstructures of fiber bragg grating sensors embedded in stainless steel Metallurgical and Materials Transactions A. 33: 3019-3024. DOI: 10.1007/S11661-002-0286-Z |
0.312 |
|
2001 |
Dannenberg R, Stach E, Groza JR. Phenomenological description of grain growth stagnation for nanocrystalline films and powders Journal of Materials Research. 16: 1090-1095. DOI: 10.1557/Jmr.2001.0151 |
0.383 |
|
2001 |
Groza JR, Garcia M, Schneider JA. Surface effects in field-assisted sintering Journal of Materials Research. 16: 286-292. DOI: 10.1557/Jmr.2001.0043 |
0.464 |
|
2001 |
Stanciu LA, Groza JR, Kodash VY, Crisan M, Zaharescu M. Electric-Field Effects on Sintering and Reaction to Form Aluminum Titanate from Binary Alumina-Titania Sol-Gel Powders Journal of the American Ceramic Society. 84: 983-985. DOI: 10.1111/J.1151-2916.2001.Tb00778.X |
0.426 |
|
2001 |
Suryanarayana C, Yoo SH, Groza JR. Consolidation of mechanically alloyed Cu-In-Ga-Se powders Journal of Materials Science Letters. 20: 2179-2181. DOI: 10.1023/A:1017916530073 |
0.301 |
|
2001 |
Stanciu LA, Groza JR. Effect of High Heating Rates on Microstructure of Alumina and Aluminum Titanate Ceramics Microscopy and Microanalysis. 7: 414-415. DOI: 10.1017/S1431927600028142 |
0.379 |
|
2001 |
Anderson KR, Groza JR. Microstructural size effects in high-strength high-conductivity Cu-Cr-Nb alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 1211-1223. DOI: 10.1007/S11661-001-0130-X |
0.411 |
|
2001 |
Stanciu LA, Kodash VY, Groza JR. Effects of heating rate on densification and grain growth during field-assisted sintering of α-Al2O3 and MoSi2 powders Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 2633-2638. DOI: 10.1007/S11661-001-0053-6 |
0.469 |
|
2001 |
Stanciu LA, Groza JR, Zaharescu M. Microstructural investigations on aluminum titanate ceramics Proceedings of the International Semiconductor Conference, Cas. 2: 311-314. |
0.313 |
|
2000 |
Groza JR, Curtis JD, Krämer M. Field-assisted sintering of nanocrystalline titanium nitride Journal of the American Ceramic Society. 83: 1281-1283. DOI: 10.1111/J.1151-2916.2000.Tb01369.X |
0.454 |
|
2000 |
Groza JR, Zavaliangos A. Sintering activation by external electrical field Materials Science and Engineering A. 287: 171-177. DOI: 10.1016/S0921-5093(00)00771-1 |
0.452 |
|
2000 |
Dannenberg R, Stach EA, Groza JR, Dresser BJ. In-situ TEM observations of abnormal grain growth, coarsening, and substrate de-wetting in nanocrystalline Ag thin films Thin Solid Films. 370: 54-62. DOI: 10.1016/S0040-6090(99)00947-5 |
0.402 |
|
2000 |
Dannenberg R, Stach E, Groza JR, Dresser BJ. TEM annealing study of normal grain growth in silver thin films Thin Solid Films. 379: 133-138. DOI: 10.1016/S0040-6090(00)01570-4 |
0.36 |
|
2000 |
Groza JR. Field activation provides improved sintering Metal Powder Report. 55: 16-18. DOI: 10.1016/S0026-0657(00)80003-X |
0.314 |
|
1999 |
Anderson KR, Groza JR, Fendorf M, Echer CJ. Surface oxide debonding in field assisted powder sintering Materials Science and Engineering A. 270: 278-282. DOI: 10.1016/S0921-5093(99)00197-5 |
0.432 |
|
1999 |
Groza JR. Sintering of nanocrystalline powders International Journal of Powder Metallurgy (Princeton, New Jersey). 35: 59-66. |
0.319 |
|
1998 |
Hur SK, Yoo SH, Groza JR, Doh JM, Yamazaki K, Shoda K. Graded coatings by gradient temperature densification Journal of Materials Research. 13: 1255-1259. DOI: 10.1557/Jmr.1998.0179 |
0.436 |
|
1998 |
Groza J. International Conf ere nee on Powder Metallurgy and Particulate Materials ‘97 Materials Technology. 13: 25-28. DOI: 10.1080/10667857.1998.11754433 |
0.3 |
|
1998 |
Groza J. 1998 International Conference on Powder Metallurgy and Particulate Materials Materials Technology. 13: 166-168. DOI: 10.1080/10667857.1998.11752795 |
0.323 |
|
1997 |
Anderson KR, Groza JR, Ulmer DG. Microstructural refinement and strengthening of Cu-4 Cr-2 Nb alloy by mechanical milling Scripta Materialia. 37: 179-185. DOI: 10.1016/S1359-6462(97)00075-4 |
0.433 |
|
1997 |
Steffani CP, Dini JW, Groza JR, Palazoglu A. Electrodeposition and corrosion resistance of Ni-W-B coatings Journal of Materials Engineering and Performance. 6: 413-416. DOI: 10.1007/S11665-997-0109-X |
0.334 |
|
1996 |
Groza JR, Dowding RJ. Nanoparticulate materials densification Nanostructured Materials. 7: 749-768. DOI: 10.1016/S0965-9773(96)00046-3 |
0.353 |
|
1996 |
Graef G, Anderson K, Groza J, Palazoglu A. Phase evolution in electrodeposited Ni-W-B alloy Materials Science and Engineering B. 41: 253-257. DOI: 10.1016/S0921-5107(96)01656-X |
0.434 |
|
1996 |
Yoo S, Groza JR, Sudarshan TS, Yamazaki K. Diffusion bonding of boron nitride on metal substrates by plasma activated sintering (PAS) process Scripta Materialia. 34: 1383-1386. DOI: 10.1016/1359-6462(96)00008-5 |
0.374 |
|
1996 |
Farkas DM, Groza JR, Mukherjee AK. Thermodynamic analysis of carbide precipitates in a niobium-zirconium-carbon alloy Scripta Materialia. 34: 103-110. DOI: 10.1016/1359-6462(95)00478-5 |
0.423 |
|
1996 |
Venkataswamy MA, Schneider JA, Groza JR, Mukherjee AK, Yamazaki K, Shoda K. Mechanical alloying processing and rapid plasma activated sintering consolidation of nanocrystalline iron-aluminides Materials Science and Engineering A. 207: 153-158. DOI: 10.1016/0921-5093(95)10034-2 |
0.439 |
|
1996 |
Broyles SE, Anderson KR, Groza JR, Gibeling JC. Creep Deformation of Dispersion-Strengthened Copper Metallurgical and Materials Transactions A. 27: 1217-1227. DOI: 10.1007/Bf02649859 |
0.407 |
|
1996 |
Popa A, Constantinescu S, Groza JR, Bock I. New high-temperature copper alloys Journal of Materials Engineering and Performance. 5: 695-698. DOI: 10.1007/Bf02646904 |
0.395 |
|
1995 |
Anderson KR, Groza JR, Dreshfield RL, Ellis D. High-Performance dispersion-strengthened Cu-8 Cr-4 Nb alloy Metallurgical and Materials Transactions A. 26: 2197-2206. DOI: 10.1007/Bf02671235 |
0.465 |
|
1994 |
Jones G, Groza JR, Yamazaki K, Shoda K. Plasma activated sintering (pas) of tungsten powders Materials and Manufacturing Processes. 9: 1105-1114. DOI: 10.1080/10426919408934978 |
0.439 |
|
1994 |
Risbud SH, Groza JR, Kim MJ. Clean grain boundaries in aluminium nitride ceramics densified without additives by a plasma-activated sintering process Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties. 69: 525-533. DOI: 10.1080/01418639408240126 |
0.409 |
|
1994 |
Groza JR. Consolidation of atomized NiAl powders by plasma activated sintering process Scripta Metallurgica Et Materiala. 30: 47-52. DOI: 10.1016/0956-716X(94)90356-5 |
0.406 |
|
1994 |
Robles J, Anderson KR, Groza JR, Gibeling JC. Low-Cycle fatigue of dispersion-strengthened copper Metallurgical and Materials Transactions A. 25: 2235-2245. DOI: 10.1007/Bf02652324 |
0.389 |
|
1993 |
Groza JR. Microstructural features of a new precipitation-strengthened Cu8Cr4Nb alloy Materials Characterization. 31: 133-141. DOI: 10.1016/1044-5803(93)90054-Y |
0.374 |
|
1993 |
Tracy MJ, Groza JR. Consolidation of nanocrystalline NbAl powders by plasma activated sintering Nanostructured Materials. 2: 441-449. DOI: 10.1016/0965-9773(93)90160-D |
0.329 |
|
1993 |
Anderson KR, Groza JR, Dreshfield RL, Ellis D. Microstructural evolution and thermal stability of precipitation-strengthened Cu8Cr4Nb alloy Materials Science and Engineering A. 169: 167-175. DOI: 10.1016/0921-5093(93)90611-H |
0.423 |
|
1993 |
Groza JR, Gibeling JC. Principles of particle selection for dispersion-strengthened copper Materials Science and Engineering A. 171: 115-125. DOI: 10.1016/0921-5093(93)90398-X |
0.408 |
|
1993 |
Groza JR. Nonconventional pressure-assisted powder consolidation methods Journal of Materials Engineering and Performance. 2: 283-290. DOI: 10.1007/Bf02660297 |
0.388 |
|
1993 |
Hensley JE, Risbud SH, Groza JR, Yamazaki K. Plasma-Activated Sintering of Aluminum Nitride Journal of Materials Engineering and Performance. 2: 665-669. DOI: 10.1007/Bf02650055 |
0.437 |
|
1992 |
Groza JR, Risbud SH, Yamazaki K. Plasma activated sintering of additive-free ain powders to near-theoretical density in 5 minutes Journal of Materials Research. 7: 2643-2645. DOI: 10.1557/Jmr.1992.2643 |
0.404 |
|
1992 |
Tracy MJ, Groza JR. Nanophase structure in Nb rich - Nb3Al alloy by mechanical alloying Nanostructured Materials. 1: 369-378. DOI: 10.1016/0965-9773(92)90087-E |
0.321 |
|
1992 |
Groza J. Heat-resistant dispersion-strengthened copper alloys Journal of Materials Engineering and Performance. 1: 113-121. DOI: 10.1007/Bf02650042 |
0.462 |
|
Show low-probability matches. |